To assist the Project Manager or Project Engineer in the daily execution of work.

To supervise the work of sub-contractors and in-house workers.

To work closely with other site operations staff to meet the project schedule.

Ensure installation is carried out as per construction drawings.

To monitor the progress and quality of work being performed by workers.

Ensure that works are executed within an acceptable standard of workmanship.

Attend the daily tool-box meeting and convey clear instruction accordingly.

Understand and ensure compliance in project requirement and scope of work.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit/replacement recommendations to clients

5. On-the-job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement/process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of faults/breakdowns and rectification according to authorities/clients' requirements.

9. Perform full set of testing complying with authorities/clients' requirements.

10. Perform maintenance programs and comply to authorities/clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit/replacement recommendations to clients

5. On-the-job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement/process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of faults/breakdowns and rectification according to authorities/clients' requirements.

9. Perform full set of testing complying with authorities/clients' requirements.

10. Perform maintenance programs and comply to authorities/clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Responsibilities:

• Operate 4-5 axis CNC Vertical Milling Machines and Horizontal Boring Machines.
• Set up machines accurately, including tooling, fixtures, and workpieces, based on engineering drawings and job specifications.
• Keep up with the housekeeping requirements at the workstation.
• Carries out duties as assigned by Foreman.

Requirements:

• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre.
• Understanding of tooling criteria, machining applications and process documentation.
• Min ITE Technical Certificate, preferably in Precision Metal Machining.

1. looking for a skilled and experienced Roofing Installer to join our team

2.As a Roofing Installer will be responsible for installing, repairing, and maintaining roofs on residential and commercial buildings

We seek a skilled and dedicated Electrical Technician to join our team in Singapore. The ideal candidate will have a strong background in electrical systems, excellent problem-solving skills, and the ability to work effectively independently and as part of a team.

Roles & Responsibilities

• Install, maintain, and repair electrical systems and equipment.
• Read and interpret technical diagrams, schematics, and blueprints.
• Perform routine inspections and preventive maintenance of electrical systems.
• Troubleshoot electrical issues using appropriate testing devices.
• Ensure compliance with all electrical codes and safety standards.
• Collaborate with other technicians and engineers to ensure optimal system performance.
• Document all electrical work performed, including repairs and maintenance activities.
• Provide technical support and training to junior technicians as needed.
• Stay updated with the latest industry standards and advancements in electrical technology.

Note : Candidate need to work public holidays and night jobs (after 10Pm )

Job Description & Requirements

• Perform general electrical maintenance including troubleshooting and repairing malfunctioning equipment.
• Identify the root cause and conduct analysis to generate solutions.
• Ensure completion of all protective maintenance duties are following the safety standards that complying with company policy.
• Install improvements and major upgrades to process system.
• Provide engineering support in project or plant maintenance
• Alert the Engineer Managers of any unusual incident that have taken place.
• Monitor the equipment process and prevent the equipment breakdown.
• Procedures for inspection, testing and certification of electrical fixed installations.
• Industrial hazards, safety and health precautions, and environmental concerns.
• Installation practice and regulations, and relevant codes of practice.

Job Requirements:

• Good interpersonal and communication skill
• Work independently
• Attention to details
• Good problem solving and observing skills

JOB DESCRIPTION:

• Coordinating with site personnel for updates regarding the work-in-progress, updating S-Curve and Weekly Schedule
• Minute all important meeting attended, track pending agenda’s progress and following up with relevant personnel
• Coordinating with the team members and ensuring that guidelines/ timelines are met
• Ensuring daily site manpower allocation and attendance is accurately reported via proprietary IPad Reporting System
• Preparing/ generating project documentation for recording purposes
• Working with other internal departments to facilitate project progress
• Other ad hoc duties as assigned
  
  5.25 days work week, alternate Saturday.8.30am to 6pm.

REQUIREMENT:

• Willing to learn, independent & meticulous
• Ability to work under pressure in a fast-paced environment
• High proficiency in MS Office programs

The Call Centre Services Executive will provide exceptional customer service by answering inquiries, resolving issues, and offering product or service information while ensuring the efficient management of facilities and related services. This role combines excellent communication skills with facility management experience, handling customer calls and overseeing operational aspects related to facility maintenance, service quality, and customer satisfaction.

Key Responsibilities:

Customer Service Management:

· Answer inbound calls and respond to customer inquiries, concerns, or complaints related to facility management services.

· Provide information on facility operations, maintenance schedules, service offerings, and processes.

· Handle customer requests with professionalism, ensuring their needs are addressed promptly and effectively.

Facility Management Support:

· Assist customers in scheduling and coordinating maintenance or repair services for the facility.

· Coordinate with the maintenance team or service providers to ensure timely facility upkeep and repairs.

· Monitor and report facility issues, ensuring prompt follow-ups and resolutions.

Call Handling & Documentation:

· Log all customer interactions accurately in the CRM system, specifically noting any facility-related requests or incidents.

· Track and follow up on customer facility-related issues, ensuring timely closure of tasks or service requests.

· Maintain documentation of maintenance schedules, repair records, and service logs related to facility management.

Product Knowledge & Assistance:

· Stay updated on product and service offerings related to facility management (e.g., janitorial services, HVAC systems, security, etc.).

· Educate customers on the facilities and services available to them, offering solutions and recommendations for improving their experience.

Complaint Resolution & Escalation:

· Handle escalated complaints or complex facility-related inquiries, ensuring they are resolved in line with company policies and within acceptable timeframes.

· Escalate unresolved facility issues to higher management or facility teams as necessary.

Performance Metrics & Targets:

· Meet performance targets, including customer satisfaction, first-call resolution, facility service response time, and overall call handling efficiency.

· Participate in regular performance reviews, facility training, and knowledge-sharing sessions.

Outbound Calls (if required):

· Make outbound calls for follow-ups, surveys, or service promotion related to facility management services.

· Ensure that customer and facility data is accurate and up-to-date.

Facility Coordination & Reporting:

· Coordinate with internal facility management teams to report service interruptions, maintenance needs, or new facility requests.

· Provide regular feedback on recurring facility issues or trends that may require long-term solutions.

Team Collaboration:

· Work closely with the facility management, customer service, and maintenance teams to ensure seamless operations and service delivery.

· Collaborate to address facility-related customer concerns quickly and efficiently.

Skills & Abilities:

· Communication: Excellent verbal and written communication skills, with the ability to explain complex facility issues in a simple and understandable manner.

· Problem-solving: Ability to assess and resolve facility-related concerns efficiently.

· Customer Service: Strong customer-centric attitude with a focus on delivering the best possible experience.

· Organizational Skills: Ability to manage multiple service requests and track maintenance schedules.

· Active Listening: Ability to understand customer needs and resolve facility-related issues effectively.

· Technical Skills: Proficiency in CRM systems, office software, and facility management software (if applicable).

Personal Attributes:

l Friendly, approachable, and professional demeanor.

l Strong attention to detail and accuracy in logging requests, schedules, and service records.

l Ability to remain calm under pressure, especially during facility disruptions or urgent situations.

l Resilience and patience when handling difficult customers or facility-related complaints.

Language Proficiency:

Fluent in English

Requirements:

Education & Experience:

· High school diploma or equivalent (required).

· GCE ‘O’/’A’ Levels or equivalent

· ITE Nitec / Higher Nitec in Engineering or Facilities Management will be an added advantage.

· Previous experience in a customer service or call centre role.

· Experience in facility management or facilities support services is highly desirable.

• Designing, developing and enhancing electro-mechanical systems and mechatronic devices.
• Creating automated systems and the software to control them.
• Conducting research, documenting findings, and presenting reports at meetings.
• Developing design documents for mechanical parts and final products.
• Identifying areas of weakness in the Equipment and making recommendations for improvement.
• Understanding problems or client briefs and developing solutions that satisfy them.
• Selecting the required tools and materials for the process.
• Assisting with recruitment, onboarding, and training of junior Engineers or Apprentices.
• Attending workshops, training sessions, and conferences to network with others and stay on top of field advancements.
• willing to do night shift
• any service requirement from the site must go and attend any time
• Willing to work Night Shift

Job Description & Requirements

Responsibilities:

• Assembly, fitting, basic tool room machining, mould development, implementing process improvements for tool manufacturing and liaise with machining technician for process planning and scheduling of project.
• Discuss tooling drawing with Designer to ensure tooling design is meeting customer product requirement.
• Assemble, fitting and troubleshooting of tooling related issue.
• Fabricate tooling components and inserts according to tooling drawing.
• Liaise with Production Engineer for execution/planning on mould testing.
• Ensure tool manufacturing and trial meeting planned schedule.
• Initiate corrective action if first article or parts not meeting specification.
• Use various measuring devices including micrometers, calipers, optical measuring machine, gauges and all inspection equipment
• Ensure tool room facilities and equipment are properly maintained and used.
• Ensure tool room health and safety precautions are taken care at all times.
• Participate in Continuous Improvement Project.
• Any other ad hoc jobs assigned by Manager / Supervisor

Requirements:

• Minimum 5 year experience in mould manufacturing toolroom environment.
• ITE or Nitec certificate in Tool & Die Trade.

• In-process inspection of part
• Use of basic equipment, profile projector, micrometer, vernier caliper & high gauge
• Visual inspection using scope
• Upkeep inspection record and samples
• Conduct inspection on first articles and record data in the inspection forms
• Other duties as assigned

Requirements

• At least 1 year QC experience
• Experience in using QC inspection tools
• Able to interpret technical drawing and computer literate
• Basic computer skills (Microsoft Word and Excel)
• Able to program and run CMM machine

1. To perform troubleshooting of Live plant MCC, other electrical panels, lighting systems, and various process instruments

related to Jurong Island - Chemical plant.

2. To support and oversee vendor-installed new MCCs/LV boards as per the design and ensure safe commissioning

assistance as per protocol.

3. To do regular Preventive maintenance for of above.

4. Sound knowledge of area classifications related to the process industry and ensuring equipment inspection, and

verifications are in order

5. To do works, servicing of valves and actuators

6. To upkeep the spare part list and consumable list

7. To key in manhour in the CMM system

8. To upkeep the maintenance records and perform maintenance activity assigned by the supervisor 9. To perform electrical

LOTO for site activities.

10..To perform minor cable laying, termination, and glanding of E&I equipment.

11. Assist mechanical technicians with any emergency troubleshooting related to E&I works.

12. To provide support for E&I fitter for tray works and tubing, and related installation works(small panels, lights JB, etc)

13. Previous experience in turn-key / green field / gray field E & I construction experience is mandatory

Job Description:

The person will be working with site personnel, site activities and be highly involved in the following aspects of the business but not limited to the below:

· Project management, site meeting and coordination.

· Technical study, identify variation works and submit accurate cost implication.

· Able to schedule, supervise and control sub-contractors to carry out their works accurately and timely in accordance to the contract drawings and specifications.

· Experience in managing a technical project, documentation and have an established network of vendors, suppliers & contractors will be an advantage.

· Undertake ad-hoc duties as assigned.

Job Requirements:

· NITEC / Diploma in Electrical Engineering

· Minimum 1 to 3 years of working experience in the related field is required for this position.

· Possess relevant safety certificates (BCSS) will be an advantage

· Willing to travel base on project site.

· Ability to communicate in English to liaise with suppliers

· Ability to work independently and meet tight project schedules

· Highly communicative and self-motivated individual personality

Interested candidates who wish to apply for the advertised position, please submit your application.

Please state your

· Last drawn & Expected salary

· Notice Period / Availability

(We regret to inform that only shortlisted candidates would be notified)

1.Manage store Inventory & handle sales cash.

2.Receive ,distribute and maintain adequate quantities of stock at all times.

3.Maintain optimal stock levels.

4.Maintain stock and consumption records.

5.Check incoming materials for quality against invoices,purchase orders and packing slips or other documents.

6.Make clear notes on the receipt of the items against eash invoice.

7.Keeps and updates records of good received and issued.

8.Complies report of expenditure,and monthly stock report.

9.Perform related duties and responsibilities as assigned.

• Required load and unload material etc
• Maintain material movement record.
• To comply with LTA road safety and traffic regulation and site safety.
• To conduct daily check to ensure vehicle is in good and safe condition/upkeeping of vehicle.
• Valid class 4 driving license and lorry crane operator.
• Prefer ably to start work within short notice.

Project Supervisor will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. To perform any other duties & Responsibilities assigned by superiors from time to time.

5. Ability to demonstrate and implement cost -saving measures.

6. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

Project Supervisor will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. To perform any other duties & Responsibilities assigned by superiors from time to time.

5. Ability to demonstrate and implement cost -saving measures.

6. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

Project Engineer will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. Attend and manage dealing with vendors, designers, classification, and flag statutory on engineering issues

5. Reviewing technical specification and drawings from designer meeting owner, class, and customer requirements

6. To perform any other duties & Responsibilities assigned by superiors from time to time.

7. Ability to demonstrate and implement cost -saving measures.

8. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

- Possess positive working attitude

A construction supervisor will be involved in the supervision of contractors and other staff in the field and will oversee the construction activities that occur on the worksite. He or she will plan, oversee, and implement construction efforts at work sites and report to the construction manager.

Responsibilities and Duties

• Supervise sub-contractors by selecting and evaluating them as well as monitoring and controlling their performance
• Travel to and supervise multiple sites during the course of a day
• Accomplish project goals by defining scope and purpose of the project, determining required resources, allocating resources, establishing protocols and standards, scheduling staff, resolving design problems, evaluating deadline estimates and adjusting as needed, and implementing change orders
• Fulfill human resource needs by hiring, training, scheduling, assigning, coaching, and disciplining employees; adhering to procedures and policies; recommending compensation; and communicating job expectations
• Meet construction budget by providing capital budget and annual operating information, identifying variances, and monitoring project expenses
• Approve projects by gaining approvals from buyers and performing inspections at critical phases
• Meet operational standards by resolving problems, contributing information to strategic plans, and identifying improvements
• Maintain healthy and safe work environment by enforcing procedures and standards and complying with legal regulations
• Prevent interruptions and fines by enforcing and fulfilling codes
• DSM (Deepa Cement Mix)
• JGP (Jet Grouting)
• Dwall
• Coring Work
• SPT Work

Qualifications and Skills of Construction Supervisor

• High school diploma or GED required
• Bachelor degree preferred (in business, construction management, or engineering)
• Minimum of five years in the construction industry, with some leadership experience
• Strong leadership skills
• Excellent organization and planning skills to prioritize and balance work
• Ability to lead others in the completion of a schedule, budget guidelines, and customer requirements
• Great verbal and written communication skills
• Valid driver’s license
• Computer proficient, with experience in MS Excel, Project, and Word

• Cut tiles and shape them properly to ensure they fit around obstacles and in tight corners and odd spaces using power and hand tools
• Form tile beds using concrete, plaster, mastic, cement, glue or mortar utilizing tools such as screeds, brushes and trowels
• Align tiles and straighten them with straightedges, levels, and squares to ensure patterns are even and precise
• Cut, install, polish and surface granite and marble and ensure accuracy during the installation process for lasting results
• Prepare various surfaces for tiling with waterproofing material or lath and by cleaning the surfaces properly
• Create decorative wall and floor designs by laying and setting mosaic tiles in kitchens, bathrooms and living rooms
• Tap tiles into place carefully using tools to properly adhere tiles to the base, making sure not to break or damage tiles
• Follow blueprints precisely and mark and measure surfaces that need to be tiled to determine how to go about jobs
• Must have at least 2 years experience in tiling works
• Able to work Over Time.

We are seeking an experienced Engineer to join our Industrial Automation & Digitalization team for contorl panels. The ideal candidate will be responsible for the design and development of industrial automation control systems, ensuring high-quality project execution and client satisfaction.

Key Responsibilities

• Development and programming of PLC, SCADA, and HMI systems (preferably with Siemens, Rockwell, Wonderware/AVEVA).
• Experience in design and development of control panel and electrical architectures.
• Conduct Hardware and Software Factory Acceptance Tests (FAT).
• Perform testing, commissioning, and Site Acceptance Tests (SAT) at client locations.
• Provide technical support to the Sales team during project bidding.
• Offer onsite and remote technical support and services.
• Ensure overall quality control of all project deliverables.
• Collaborate effectively with team members and clients.
• Travel within Singapore internationally including offshore Oil & Gas facility as needed for project implementation and meetings.

Requirements:

• 3-6 years of hands-on experience in industrial automation & digitalization.
• Proficient in various communication protocols used in the automation industry.
• Strong knowledge of automation technologies specific to Pharma, Oil & Gas industries is an advantage.
• Strong verbal and written communication skills.
• Team player with a flexible approach to work and problem-solving and engage with other project team members in Singapore and overseas.
• Diploma or Degree in Electrical, Electronic, Computer, Mechatronic Engineering, or equivalent.
• A willingness to learn and a growth mindset.

The Quantity Surveyor reports to the Senior Quantity Surveyor and assists in all costs and contractual issues in Main Contract as well as Sub-Contracts connected to the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Ensure accurate measurement of quantities to assist in the preparation of progress payment claims, variation order claims and payments to subcontractors and suppliers including all final accounts.
• Involve in preparing regular cost reports including maintenance budget cost controls.
• Assist in maintaining good documentation of events at site for variation order / EOT claims.
• To work closely with the site storemen to ensure proper documentation of materials control.
• Be familiar with the specifications and scope of works at various stages of the project so as to be able to advise the structural, architectural and M&E coordinators on the contracted design requirements.
• Assist in the procurement of sub-contractors and suppliers of specified materials.
• Attend technical meetings to keep abreast of design development issues and provide cost escalation alerts.
• Learn and be adequately briefed on the contractual / legal rights of the Main Contractor in order to advise colleagues at site and the management on any choke points during the project.
• Adherence to safety practices in the workplace.

Value Add of Position

• Help the project’s bottom line by rigorously monitoring and implementing cost controls.
• Establish a good relationship with Client, Consultants and subcontractors to ensure that the project is smoothly managed in terms of resources and timeline.

Qualifications and Education Requirements

• Education: Degree/Diploma in Quantity Surveying, Building or Civil Engineering
• Experience: Minimum 1 year of working experience in tendering, estimating and measurement of quantities in civil projects
• Good analytical skills

• Reports to Utility Manager
• Coordination between sub-contractors and construction team on excavation works, services diversion, and reinstatement works.
• Provide update of the progress of works in the construction site.
• Supervise subcontractors’ works as per work plan, timeframe, and as per required quality standard of work output.
• Monitor utilities and M&E work executed are in accordance to statutory requirements, construction procedures, and safe work practices.
• Assist other Engineers in preparing the programming of works, scheduling, and monitoring the progress plan.
• Any related works as assigned by superior

Job requirements:

• Bachelor’s Degree in Civil Engineering or equivalent
• Minimum of 2 years’ relevant experiences as Utility Engineer
• Candidate with relevant LTA infrastructure project experience is an advantage
• Knowledgeable with various Utilities, M&E works
• Self-motivated, independent individual and possesses great initiative
• Good interpersonal skills
• Proficiency in using Microsoft Office and Auto CAD is an advantage
• Location: Woodlands
• Project: Viaducts

• Reports to Safety Manager
• Implement, monitor & improvise site safety management system
• Support management in safety-related matters
• Ensuring compliance with regulatory and corporate HSE policy and requirements by conducting regular inspection and internal audits
• Proactive to lead incident investigation, address the control measures, and ensure that all incident reports are made in a timely manner.
• Oversee all general activities concerning HSE and Implementation of Health, Safety, and Environment (HSE) rules, regulations, and procedures of the company.
• Ensure that relevant HSE documents, reports, communications, and other requirements of HSE are kept properly in place.
• Ensure HSE complies with ISO
• Compile reports and presentation slides for management reporting

Job requirements:

• Minimum a Diploma in Workplace, Safety & Health or equivalent
• Attained MOM WSHO license
• Proficient in MS office, IT savvy (Google forms etc)
• Minimum 3 years post-registration & relevant practical experience in a similar role with LTA projects is mandatory for this position
• Experience in Civil road works and heavy lifting matters
• Location: Woodlands
• Project: LTA Viaducts