JOB RESPOSIBILITIES,

Planiing And Undertaking Schedules Maintenance

Responding To Breakdowns

Diagnosing Faults

Supervising Engineering And Techical Staff

Creating Maintenance procedures

Review the work progress on daily basis

Plan ahead to prevent problems and resolve any emerging ones

Assist all project / maintenance related sale inquiries from initial quote status through to order placement, and off to the client and follow up closely after quote submitted

Handle all project/maintenance renewal related matters

Job Responsibilities:

· To perform calibration of Test and Measurement (T&M) equipment.

· To provide quality support to customer technical enquiries.

· Install and optimize hardware/software/network products and configuration at bench or customer sites.

· To meet customer target in Quality and Turn-around time.

Job Requirements:

l Candidate must possess at least ITE/Diploma in RF Engineering (Electrical/Electronic) or equivalent.

l At least 1-2 year(s) of working experience in Test & Measurement environment.

l Expected to know basic knowledge of electronic instruments.

l Familiarity with general purpose instruments like Mutimeters and scope.

l Basic knowledge of repair and troubleshooting skill and basic understanding of calibration.

l Good repair analysis skill and judgment call.

l A proactive and keen learner of new technology.

l Excellent customer service attitude, good team player and ability to work under stress.

l Good verbal and written communication skills.

l Ability to work independently, sharing skill set and quick to adapt to new technologies.

Benefits:

· AWS

· Yearly increment

· 5-day work week

· 14-day Annual Leave

· Medical and Dental

· Work Injury Insurance

· Overtime Pay

Job Description & Requirements

Job Description:

• Quantity take-off and cost estimation sourcing of contractors and suppliers
• Understanding the requirements, prepare and submit tenders with specific deadline
• Liaise and coordinate with the Consultants, Clients and Sub-contractors
• Contract and tender document administration
• Collaborate with project team and tender department to ensure all drawings are in order as per design requirements.

Requirements:

• Degree/Diploma in Quantity Surveying
• Minimum 2-3 years relevant experience in building and construction industries - ACMV SYSTEM
• Fresh graduate is welcome to apply
• Possess strong project organizational skills, resourceful, energetic and able to work independently as well as in a team
• Good communication, interpersonal and problem solving skills

Please indicate the below information in your resume:

o Current & expected salary

o Reason(s) for Leaving

o Availability to commence work

To manage and coordinate the production of quality shop drawings and BIM models in all projects assigned with minimal supervision. He/ She must be able to carry out HVAC/piping-related drawings.

• To produce 2D drawings from BIM models with accuracy ensuring drawings produced are according to the Project or the Client’s Drafting Standards and Procedures, and that the drawing submission schedule is achieved.
• Maintain proper records of all issued & received models/drawings, Clash Reports, RFIs, etc.
• BIM Register following the company’s ISO Standards and Procedures and ensuring all the drawings are completed on schedule or promptly.
• Perform regular drawing backups and housekeeping work in the directory
• The secondary role includes developing technical plans, sections, details, and 2D/3D schematic diagrams using AutoCAD and in-house software.
• Accountable for the fluent/organized presentation, content correctness/accuracy of shop drawings production in form, fit, and function through thorough coordinates with other trades and services in 2D/ 3D submission.
• Responsible for ensuring full compliance with the company’s Shop Drawings Standard Operation Procedure, including adherence to design provision/scope of work according to contractual obligations.
• Generate a clash report based on the Matrix provided
• Work under the supervision of the Project Manager and perform the work tasks assigned.

Experience / Skills

• Degree/ Diploma in Mechanical Engineering or other relevant disciplines.
• Preferably with a minimum of 2 years of working experience in space planning, and design coordination, preferably on different scales of projects within engineering design consulting business.
• Having good knowledge of software such as Revit, and AutoCAD.
• Knowledge in Isometric drawings, LOD 350, and Plant 3D will be added advantages
• Good planning skills in managing modeling and drafting work.
• Possess strong initiative, and ability to work independently and within a team environment when required.
• Good interpersonal, written and verbal communication skills.

We regret that only shortlisted candidates will be notified.

Job Description & Requirements

Roles & Responsibilities: (IN BUILDING CONSTRUCTION)

• Assist Project Manager in planning, execution and completion of ACMV Project.

• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively.

• Supervise and liaise with relevant authorities / subcontractors / workers at site and ensure work performed on-site complies with local authorities’ requirements.

• Analyze, manage and track project costs against budget.

• Any other tasks assigned by the management.

Job requirements:

• Degree/Diploma in Mechanical Engineering or its equivalent

•Candidate with Specialist Diploma in Construction Productivity (SDCP) is an added advantage

• Work experience in ACMV or Mechanical Engineering in the construction industry.

• Good technical knowledge of ACMV system for Commercial Project.

• Good communication, interpersonal and problem-solving skills

• Possess a Class 3 license will be an added advantage.

*Salary is commensurate to working experience.

Please indicate the below information in your resume:

o Current & expected salary

o Reason(s) for Leaving

o Availability to commence work

We regret that only shortlisted candidates will be contacted.

Job Descriptions:

• Perform structural design and analysis, loading calculation and drawings for ETFE Skylight, Tensile Membrane, Structural Steel Structures.
• Able to perform Finite Element Analysis Modeling and Analysis of Structure.
• Preparation of 3D structural models and shop fabrication drawings, method statement etc.
• Work closely with architects, engineers, general contractors, fabricators and other professionals.
• Involve in supervising projects and provide progress report.
• Make sure projects meet authorities requirements.

Job Requirements:

• Minimum PhD or Masters degree in Civil and Structural Engineering or equivalent
• Minimum 2 years relevant experience in Civil and Structural Engineering design
• Proficiency with steel 3D modelling, analysis & design software such as Rhino and grasshopper.
• Proficiency with programming language especially C++ , Python and Fortran
• Able to produce detailed layout drawings
• Experience in Tensile Membrane, ETFE Skylight and Steelwork design is an advantage
• Good command of English

Job Decription:

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To report and take instruction from the Project Architect / C&S / M&E QP.
• To carry out regular inspection ensuring that the architectural, C&S, M&E and interior fit out works are constructed in accordance with the approved construction drawings and specifications, and the Building Control Act, Workplace Safety and Health Act and other applied regulations.
• To study the respective construction drawings, comment on sub-con developed shopdrawings and material submissions and collate with the respective resident staffs on the site co-ordination matters for QP, PE and Consultants resolution in construction.
• To perform ERSS calculation & BIM drawings for consultant's approval.
• To compute construction BQ for QS to follow up.
• To monitor, assess and report on contractor’s programme and progress of works.

Job Requirement:

• Experience in large scale construction below live building / Tunneling Project / Viaduct Project
• Strong knowledge of Architectural / C&S/ M&E details, working drawings and local construction practices
• Ability to use Autocad, Microsoft Project Programming and Management Software and related software
• Possess at least a Degree in Architecture or equivalent from a University recognized by Board of Architects (BOA), Singapore / Institution of Engineers Singapore
• At least 5 years’ site working experience in Singapore
• Must possess RE or RTO certification by IES
• Familiar with HDB, PUB & LTA specification
• 5.5 days work

Responsibilities:

Quality Assurance

• Quality Assurance Plan -Overview of QMS.
• Leads, directs a team of Engineers for routine task of QA surveillance, onsite inspection /test and documentation.
• Establish Acceptance Test plan as per CTS & Class.
• Establish FAT plan and review of FAT Supplier's Protocols
• Review and advise the development of HAT test protocols according to the Approved ATP.
• Review of Internal Test records
• Review of Platform Acceptance Test protocols
• Update the status report on FAT, HAT & PAT in the progress meeting
• Manage the deliverable documents

Commissioning of Shipboard Machinery System/Electrical & Automation System and Equipment

• Leads, directs and supervise a team of engineers in preparation of commissioning of shipboard equipment's ensuring the entire responsibility for the completion on schedule in accordance to the protocols.
• Establish and continuous monitoring of Commissioning/ HAT Plan, based on master project schedule.
• Manage resource planning and technical advice for the QA commissioning Team.
• Manage work safety, assigned jobs, risk assessment and productivity of the Commission Team and manage the commissioning job scope with supplier/ OEM within budgeted Man Hours
• Oversees and ensures all construction activities are completed prior to taking up the system for commissioning.
• Prepares manpower organization to fulfill the commissioning schedule. At times to coordinate with other departments to resolve interface problems
• Deploy and assign jobs and expectation to his engineers and supervisors
• Holds regular meetings with the team and other departments in the commissioning progress/issues affecting the test as well as meetings with the vendors to resolve any equipment related problems.
• Set productivity targets for his team, assess, identify and manage training needs for his team
• Plan department man power projections, and manage shortfall or excess resources.
• Manage departmental improvement and processes to improve quality of work.
• Manage & Monitor departmental safety work plan and review departmental BBS and hazard reporting program.
• Manage E-Ops Team for Sea Trial
• Perform safety audits on departmental safety practices and employees.

Requirements:

• Diploma or Degree in Marine, Electrical or Electronic Engineering
• Minimum 7 to 10 years relevant experience in marine related industry
• Track record of managing a team of engineers and workers
• Knowledge of Class requirements and Quality Standards
• Good knowledge and onboard exposure for ship and machinery system/electrical & automation system operation and upkeep
• Experience in managing marine system/electrical & automation system engineering commissioning and services support department
• Possess Shipboard & Sea Going/Sea Trial Experience
• Resourceful and able to adapt to changes on short notice
• Ability to continuously review current jobs and inject new ideas to improve work methods
• Able to work under pressure
• Able to work onboard vessels and at heights

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Duties/Areas of Responsibility

· Manage maintenance, repair, operations, and upgrading works for ACMV projects

· Assist in development and project process management.

· Overseeing site installation works, supervising sub-contractors, and attending site meetings

· Possesses leadership, ownership, and responsibility with the team for discussions on technical solutions

· Project construction management and safety management

· Construction meeting and preparation with subcontractors

· To plan, implement and monitor weekly works activities with Site engineering

· Testing and commissioning of ACMV system as per the schedule.

· Attend RTO inspection and prepare as built drawing based on site coordination

· Any other related projects to be assigned

Job Requirements

· Minimum MUST have 2 years local site experiences

· Looking for Career Progression

· Possess adequate qualification in Mechanical Engineering

· Direct work experience within ACMV construction industry

· Experience in handle multiple projects simultaneously

· Knowledge of codes, standards and procedures

· Proficient in MS Office, AutoCAD, Helpdesk application, etc

· Able to work with fast pace environment

· Positive attitude

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working hours : Monday –Thursday – 8.00am to 5.30pm, Friday – 8.00am to 5.00pm

Location: Tuas

Salary range :$2500 - $3000 subject to the working experience

Responsibilities

• Draft and executing drawing for projects
• Review engineering drawings to ensure adherence to specifications and design
• Professional knowledge in space-planning and conceptual design
• Work closely with the engineer team to ensure successful delivery of the project
• Updating of drawings when necessary
• Housekeeping of all drawings for softcopy and hardcopy

Requirements:

• ITE/ Diploma in Mechanical / Mechatronics Engineering or equivalent
• At least 1 years of working experience in the related fields
• Able to read and understand mechanical engineering and structural drawings
• Experience in Technical drawing
• Well versed in using Auto AD knowledge such as solid edge, Auto CAD, solidworks

Benefits:

• Catered company lunch will be provided on a daily basis.
• Daily company transport from Lakeside MRT Station or Boon Lay MRT Station.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

JOB REQUIREMENTS

1. Strong Accounts background
2. Able to work independently
3. Good communication skill
4. Deligent and meticulous

JOB DESCRIPTION

Accounts Payable

Monitor and ensure data of inventories/ invoices/ vendor particulars are input into the Accounting System.
Ensure all documentations are well received, invoices tally with delivery orders and ensuring payment are promptly issued within credit term.
Generating of payment vouchers and issuance of cheques.
Ensure payment are immediately entered into the Accounting System upon payment.
Proper filing and book keeping.

Accounts Receivable

Generating invoices accordingly to certified payment.
Follow up on accounts receivable with relevant clients.
Ensure timely collection of payment.
Keeping proper documentations and paper trail regarding related AR matters.

Monitoring of Project

Generate weekly (WIP) Work-in-progress report to reflect revenue, COGS, labour costs and other operating expenses to derive the profitability of the week.
Ensure timely and justifiable certification of payment are provided by Clients.
Keep track of progress claim status and Accounts Receivable.

Finalization of Project

Generate report to reflect the statistics of man-hours/ COGS/ operating expenses and update to system for future reference.
Finalize payment and keep track of retention amount and time frame.
Final settlement of payment and record project reference into “Completed projects”.

Administrative Duties/ Others

Generating of invoices, payment vouchers and other related documents.
Ensure neat and tidy book keeping.
Assist with issuance of wages to workers and breaking down into the appropriate monetary denominations.
Fulfil any other ad-hoc duties as and when assigned by Superior/ Management.
Reimbursement to employees / Petty cash.
Generate weekly reports for Management review. (Progress Claim status, WIP and Accounts Receivable)
Handle GST quarterly report and filing, Form C-S/C submission.
Liaise with auditors for statutory reporting and compliance.

RESPONSIBILITIES

1. Operates as the point of contact for assigned to address customers’ needs on commercial matters

2. Assist in Company-wide negotiations with existing customers, including

preparation of proposals, contracts and discussion of the contract terms and conditions

3. Liaise with other divisions and departments on customers’ requirements

4. Tracks customer account metrics

5. Develops and maintains long-term relationships with existing customers accounts

6. Conduct surveys to measure customer satisfaction on a quarterly annual basis

7. Prepare reports for management reporting purposes

8. Identifies opportunities to grow business with existing customers

9. Identify business process gaps and coordinate business/system process improvement initiatives through teamwork with relevant stakeholders to meet required objectives

10. Coordinate and collaborate with both internal and external stakeholders to ensure a clear understanding of the current AS-IS state, processes and relationships for Commercial

11. Provide guidance to consultants to map the To-Be state and propose solutions that meet objectives, drive continuous improvement for Commercial

REQUIREMENTS

1. Singapore Citizen / Singapore PR

2. Good Honours Degree in Engineering (Aerospace / Mechanical / Electronics Engineering) or Business

3. Excellent analytical, interpersonal, presentation and communication skills

4. Able to be creative in developing solutions

5. Relevant knowledge and experience in aviation/sales/commercial is an advantage.

6. Conversant in Microsoft Office such as Excel, PowerPoint and Word

7. SAP background and experience would be an added advantage

8. Stakeholder and project management

SIAEC is proud to have received the 2024 'Gold Standard in Excellence in Talent Management & Acquisition Award' from the Singapore Human Resources Institute.

At SIA Engineering, we are committed to ensuring your personal information is protected and never misused. Personal data collected will be used or disclosed only for the purposes of your job application and potential employment with SIA Engineering, such as for assessing and evaluating your suitability for employment in any current or prospective position within the organization and verifying your identity and accuracy of the personal details and other information provided.

By submitting your application for this position, you consent to:

a) the collection, use and disclosure of your personal data by SIA Engineering for the purposes of your application and potential employment with SIA Engineering, including disclosing such personal data to any of SIA Engineering’s subsidiaries, affiliates or related corporations (if necessary for the processing of your job application); and

b) SIA Engineering’s retention of your personal data for 1 year for consideration of future job opportunities (where applicable)

Candidates are not required to pay SIA Engineering, any Agents, or Sub-Agents representing the organisation a recruitment fee or other fees relating to their application / employment.

Jobscope:

- Manage and coordinate administrative matters in the company.

- Managing and updating KPI, claims, attendance tracking, record updates and other tasks.

- Assist in calendar support & updating meeting schedules

- Assist in managing employee petty cash claims. (payroll is a +)

- Other ad hoc tasks

Job requirements:

- Min O level certificate

- Working Experience in related office matters & HR (preferbly 1 year+)

- Familiar and worked with Microsoft office, Excel, Adobe acrobat ect.

- Possess good written and verbal communication skills

- Take initiative and have the ability to respond to various situations.

- Possess ability to collaborate and work together as a team

Do send your updated resume to +65 9815 8861

Job Purpose:

Service engineer to carry out preventive and corrective maintenance of machinery, industrial vehicles, heavy machinery and waste collection equipment.

Opportunity to develop as a professional within heavy duty machinery sector through continuous training programmes to ensure the necessary technical and skills.

Main Duties and Responsibilities:

• Preparation of necessary material and stock control
• Diagnosis of breakdowns, either electric, mechanic or hydraulic.
• Interpretation of electrical and hydraulic diagrams to apply correct solutions
• Inspection and repair of electrical, mechanical and hydraulic breakdowns and analyze possible malfunctions of machinery.
• Preparation of needs of materials and stock control

Accountabilities & Commitments Required

• Able to attend breakdowns after office hours and weekends
• Commitment to join a growing company and take full responsibility to be part of a team

Education / Qualifications

• Technical education
• Fluent in English
• Other laguanges

Job-related skills & abilities

• Class 3 driving licence
• Analytical Skills for problem-solving

Other requirements

• Customer Satisfaction, Aftersales, and Customer Service skills
• Previous experience in a similar role in the waste management industry will be a plus point

Job Purpose

We are seeking a talented and experienced Project Engineer to join our dynamic team. The successful candidate will play a pivotal role in the successful execution of EPC and ECPM construction projects. You will be responsible for overseeing all aspects of project engineering, from planning and design to construction and handover.

Key Responsibilities

• Develop and maintain project schedules, budgets, and resource plans.
• Coordinate with engineering, procurement, and construction teams to ensure project deliverables are met on time, within budget, and to the required quality standards.
• Conduct site inspections and monitor project progress to identify potential risks and develop mitigation plans.
• Prepare and manage project documentation, including contracts, change orders, and progress reports.
• Ensure adherence to safety, health, and environmental regulations.
• Collaborate with clients and subcontractors to establish and maintain effective relationships.
• Identify and implement process improvements to enhance project efficiency.

Qualifications

• Diploma or Bachelor's degree in Mechanical Engineering or a related field.
• Proven track record in managing complex construction projects.
• Strong knowledge of engineering principles, construction methods, and project management tools.
• Excellent problem-solving and decision-making skills
• Strong communication and interpersonal skills.

Required Skills

• Excellent leadership and team management abilities
• Strong technical skills in ACMV engineering works
• Proficiency in MS Excel and other relevant software for quotation preparation
• Ability to create clear and comprehensive work method statements
• Strong written and verbal communication skills
• Excellent problem-solving and decision-making abilities
• Good project management and organizational skills
• Customer service oriented with the ability to build and maintain client relationships
• Further Training : Managing WAH, Bizsafe L2, CSCPM

Personal Attributes

• Detail-oriented with a strong commitment to quality
• Proactive and able to work independently
• Adaptable and able to work under pressure
• Safety-conscious with a strong focus on workplace safety

Get to Know the Role

We are seeking a Senior Manager of Application Engineering & QA to lead a team in providing innovative technical solutions while ensuring quality standards. This role involves overseeing continuous improvement projects, mentoring team members, and collaborating with customers on their technical needs. Additionally, the candidate will handle customer inquiries and manage audits. Knowledge of quality assurance practices and strong leadership and communication skills are essential.

Essential Responsibilities

· Lead a team of Application Engineers to meet company objectives and KPIs while planning and managing Continuous Improvement Projects (CIP) focused on quality, safety, and budget adherence.

· Supervise the design and implementation of technical solutions to meet customer needs.

· Coordinate with product development, sales, and support teams for seamless integration.

· Execute and monitor Application Engineering projects to ensure timely and budget-compliant delivery while staying informed on industry trends and technologies to provide innovative solutions.

· Collaborate with different stakeholders and Japanese counterparts to resolve customer feedback.

· Oversee the development of technical documentation and train users on best practices.

· Ensure compliance with quality assurance practices and industry standards.

· Manage customer audits to uphold quality protocols and address any findings.

· Provide coaching and development opportunities to enhance team performance.

Skills and Competencies Profile

· A Master’s or Bachelor’s degree in Engineering.

· 6 to 8 years of relevant experience, including 2 to 4 years in a managerial role.

· In-depth knowledge of thin-film metallurgy, deposition processes, and related equipment (e.g., Ion Beam Deposition, PVD, CVD).

· Proficient in problem-solving, with the ability to address customer issues through critical and logical thinking

· Familiarity with quality assurance practices, including compliance with industry standards and quality management systems.

· Experience in conducting audits and implementing corrective actions to ensure adherence to quality protocols.

· Proficiency in statistical data analysis tools such as JMP, Minitab, Design of Experiments (DOE), and Statistical Process Control (SPC).

· Strong leadership, coaching, and communication skills.

· Ability to thrive in a dynamic, fast-paced environment while managing multiple priorities.

HOYA Electronics Singapore Pte Ltd is an equal opportunity employer. We are committed to building diverse teams and creating a safe and inclusive workplace that enables our people to perform at their best, regardless of nationality, ethnicity, religion, age, gender identity or sexual orientation, and other attributes that make every individual unique.

An offer with HOYA Electronics Singapore is conditioned upon the successful completion of pre-employment conditions, as applicable, and subject to applicable laws and regulations.

HOYA Electronics Singapore does not charge candidates any recruitment fees or unlawfully collect any other payment from candidates as consideration for their employment with HOYA Electronics Singapore.

Purchasing / Procurement Assistant / Executive

• S$ 2,300 to 3,000
• Location: Jurong
• Monday to Friday 9am – 6pm (Friday off at 5:30pm)

Job Overview:

The Purchaser/Procurement Specialist will be responsible for sourcing materials, equipment. The role involves working with suppliers, negotiating contracts, and ensuring timely delivery, using SAP or IFS systems to manage procurement processes.

Key Responsibilities:

• Source and select suppliers.
• Negotiate prices and contracts.
• Manage purchase orders using SAP or IFS.
• Coordinate with suppliers for on-time deliveries.
• Ensure procurement costs are within budget.
• Maintain records of purchases and supplier interactions.

Skills & Qualifications:

• Experience with SAP or IFS
• Experience in procurement, preferably in engineering field.
• Proficiency in Microsoft Office.
• Training provided

Apply now for Interview arrangement

Daniel Wong Reg No: R2095781

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Managing staff: Supervising and managing staff, including recruiting, selecting, orienting, and training employees. They also coach, counsel, and discipline employees.
• Ensuring performance: Making sure employees meet performance expectations and deadlines.
• Maintaining a safe work environment: Ensuring that the work environment is safe, secure, and healthy.
• Providing guidance: Providing guidance and support to employees, and identifying development needs.
• Communicating: Communicating organizational needs and ensuring great customer service.
• Working with the Human Resources Department: Working with the Human Resources Department.
• Managing workflow and scheduling: Managing workflow and scheduling.
• Providing advancement opportunities: Providing advancement opportunities.

Some skills and qualities that are often required for a supervisor role include:

• Leadership experience
• Excellent communication skills
• Eye for detail and accuracy
• Reliable, with high integrity and strong work ethic
• Ability to work as part of a team
• Professional appearance and attitude
• Computer literacy
• Proactive organizational skills

Job Description:
We are seeking a highly motivated and skilled Electrical Engineer to join our dynamic team. The ideal candidate will have a strong background in electrical engineering, with hands-on experience in designing, developing, and testing electrical systems. You will be responsible for working on a variety of projects, from initial design to implementation, ensuring that all electrical systems meet industry standards and are completed within budget and on time.

Key Responsibilities:

• Manage & Lead the electrical team.
• Perform engineering duties such as design, engineering calculations, planning, tender. Preparation/evaluations as part of the engineering project team
• Team development
• QA/QC documentation review of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Resolve any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.
• Suggests ways to increase revenues and efficiency.
• Testing & Commissioning of the Electrical Systems.
• Power Turn On
• Ensure the team follows all electrical codes and standards.

Requirements:

1. Diploma & ITE in Electrical Engineering or related electrical engineering qualification
2. At least 3 years of experience in related field & local experience
3. Able to work independently
4. Knowledge in residential & commercial building installation works.
5. Knowledge in design skills and usage of AutoCAD/ Revit will have added advantage.
6. Good command of English, written and spoken.

Applicants who are Singaporeans or Permanent Resident are preferred.
If there are excellent and suitable foreign applicants, the company can also apply for work pass (SP/EP) .

For consideration, kindly submit your CV to [email protected]

Roles & Responsibilities

Responsibilities:

- Attend site meeting / resolve site issues / reporting to higher management.

- Liaise with site engineering to ensure a smoothly workflow

- Schedule, monitor and supervise the progress of M&E work on site

- Assist in planning, controlling and coordinating of mechanical and electrical works

- Oversees the entire installation works

- Carries out inspection on electrical components, such as electrical and mechanical equipment

- Install, maintain, and / or repair electrical wiring works

- Installs electrical apparatus, equipment and fixtures

- Troubleshoot electrical issues, run tests to determine its cause and fix/replace electrical components depend on the results

- Carries out plans for electrician wiring for well-functioning electrical systems

- He as a Site Supervisor, leads Teams, provide guidance to the worker, oversee the workflow of the teams and designate tasks to the respective worker.

- Help to provide training / guidance / impart his knowledge to the unexperienced worker.

The Quantity Surveyor reports to the Senior Quantity Surveyor and assists in all costs and contractual issues in Main Contract as well as Sub-Contracts connected to the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Ensure accurate measurement of quantities to assist in the preparation of progress payment claims, variation order claims and payments to subcontractors and suppliers including all final accounts.
• Involve in preparing regular cost reports including maintenance budget cost controls.
• Assist in maintaining good documentation of events at site for variation order / EOT claims.
• To work closely with the site storemen to ensure proper documentation of materials control.
• Be familiar with the specifications and scope of works at various stages of the project so as to be able to advise the structural, architectural and M&E coordinators on the contracted design requirements.
• Assist in the procurement of sub-contractors and suppliers of specified materials.
• Attend technical meetings to keep abreast of design development issues and provide cost escalation alerts.
• Learn and be adequately briefed on the contractual / legal rights of the Main Contractor in order to advise colleagues at site and the management on any choke points during the project.
• Adherence to safety practices in the workplace.

Value Add of Position

• Help the project’s bottom line by rigorously monitoring and implementing cost controls.
• Establish a good relationship with Client, Consultants and subcontractors to ensure that the project is smoothly managed in terms of resources and timeline.

Qualifications and Education Requirements

• Education: Degree/Diploma in Quantity Surveying, Building or Civil Engineering
• Experience: Minimum 1 year of working experience in tendering, estimating and measurement of quantities in civil projects
• Good analytical skills

The Quantity Surveyor will report to the Director and assists in all costs and contractual issues in Main Contract as well as Sub-Contracts connected to the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Ensure accurate measurement of quantities to assist in the preparation of progress payment claims, variation order claims and payments to subcontractors and suppliers including all final accounts.
• Involve in preparing regular cost reports including maintenance budget cost controls.
• Assist in maintaining good documentation of events at site for variation order / EOT claims.
• Assist in the procurement of sub-contractors and suppliers of specified materials.
• Attend technical meetings to keep abreast of design development issues and provide cost escalation alerts.
• Learn and be adequately briefed on the contractual / legal rights of the Main Contractor in order to advise colleagues at site and the management on any choke points during the project.
• Adherence to safety practices in the workplace.

Value Add of Position

• Help the project’s bottom line by rigorously monitoring and implementing cost controls.
• Establish a good relationship with Client, Consultants and subcontractors to ensure that the project is smoothly managed in terms of resources and timeline.

Qualifications and Education Requirements

• Education: Degree in Quantity Surveying, Building or Civil Engineering
• Experience: Minimum 2 years of working experience in tendering, estimating and measurement of quantities in civil projects in Singapore
• Good analytical skills

Technical Competencies

• Robust knowledge of materials and construction at site
• Strong measurement skill
• Ability to use measurement software
• Good understanding of the principles of contracts

We are seeking a highly motivated and detail-oriented Property Executive to assist in managing and optimizing a portfolio of properties (residential/commercial/industrial) and evaluating new property development or value-add opportunities. The successful candidate will work closely with property managers, tenants, investors, and other stakeholders to ensure the effective operational and financial performance of real estate assets. This role will assume a blend of administrative tasks, financial and investment analysis, feasibility studies, property management support, and strategy implementation.

1. Key Responsibilities: Property Portfolio Management:

o Assist in managing a portfolio of properties (residential/commercial/industrial).

o Monitor the performance of assets and identify asset enhancement initiatives.

o Support in maintaining accurate property records, including lease agreements, property inspections, and

maintenance schedules.

2. Financial Management and Reporting:

o Assist in preparing budgets, forecasts, related to property assets.

o Analyze financial performance, including income, expenses, and return on investment (ROI) metrics.

o Coordinate with finance teams to ensure timely and accurate rent collections, payment processing, and financial reconciliations.

3. Tenant Relations:

o Serve as a point of contact for tenants regarding queries, complaints, and requests for maintenance.

o Assist in lease negotiations and renewals, ensuring compliance with the terms and conditions.

o Ensure that tenant relations are maintained to foster a positive and long-term occupancy.

4. Leasing and Marketing:

o Assist in leasing efforts by helping to market vacant properties, preparing lease documents, and supporting the tenant selection process.

o Create promotional materials, and host property viewings.

5. Maintenance and Property Upkeep:

o Support in scheduling and overseeing regular maintenance and repairs for properties.

o Ensure compliance with health, safety, and environmental regulations.

o Coordinate with contractors and vendors for property upgrades, renovations, or any necessary work.

6. Risk Management and Compliance:

o Ensure all properties are in compliance with legal, regulatory, and company standards.

o Assist in property inspections and risk assessments to identify areas for improvement or mitigation.

o Help with the management of insurance policies, claims, and other risk-related matters.

7. Administrative Support:

o Handle administrative duties such as preparing reports, correspondence, and filing property-related documents.

o Assist in preparing presentations for internal meetings, stakeholders, or investors.

Requirements:

• Diploma or Bachelor’s degree in Real Estate, Business Administration, Finance, or a related field.
• Proven experience in the real estate or related industry (typically 2-3 years).
• Strong understanding of financial concepts, budgeting and reporting.
• Proficient in financial modelling and conducting feasibility studies.
• Excellent organizational skills and attention to detail.
• Strong communication and writing skills.
• Proficient in MS Office (Excel/PowerPoint/Word); familiarity with property management software is a plus.
• Ability to work both independently and as part of a team.
• Knowledge of relevant property laws, regulations, and compliance standards would be advantageous.
• Proactive, self-motivated, and able to prioritize tasks effectively.

Support the business with all aspects of shipping and logistics. Ensure all customs clearance is in line with Claxton Engineering compliance procedures. Be responsible for the timely, cost-effective shipping of all equipment whilst adhering to standard operating procedures and policies and applicable law. With responsibility for all goods exported and imported by Claxton Engineering.

· Creation of despatch/collection notes for equipment movement.

· Creation of import/export commercial invoices, packing lists and clearance instructions.

· Liaise with freight forwarders to ensure efficient shipping of subsea equipment.

· Obtain export and import entries to complete logistical files required to satisfy audit requirements.

· Provide logistical knowledge to all parties on site and identify means of shipping equipment.

· Liaise with all Warehouse and Logistics colleagues to ensure the efficient and accurate control of imports and exports, confirming full compliance with company and legislative requirements.

· Liaise with colleagues and clients globally in relation to shipments and document control in international locations.

· Manage and resolve any logistics complexity for Australia and South-East Asia destination countries.

· Ability to compile import/export data related to Major Exporter Scheme (MES) for IRAS submission.

· Capable of freight procurement negotiation.

Strong knowledge in dangerous goods (DG) handling and carrier shipping documents.

· Responsible for installing, repairing, and maintaining piping systems and working with various types of pipes, such as steel, copper, plastic, or other alloys. They build pipe systems that transport hot or cold water, fuel, steam, and industrial chemicals and gases.

· Manage projects from start to finish, including planning, scheduling, and assigning tasks to their crews. And ensure that projects are completed on time and within budget.

· Responsible for the safety of their crew and the work environment. Ensure that work is done in compliance with safety regulations and procedures.

· Conduct regular inspections to ensure that piping systems are installed correctly and are functioning properly. Having good knowledge to resolve any quality issues that arise.

· Communicate with project stakeholders, including clients, suppliers, and engineers, to ensure that everyone is working together effectively.

· Maintain accurate records of piping activities, including work hours, materials used, and progress reports.

· Supervisors shall train and mentor piping personnel to help them improve their skills and performance.

· Manage and allocate resources effectively to ensure that projects are completed on time and within budget.

· Stay up to date on industry advancements, regulations, and best practices.