Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Skills and experiences required

· Able to do AUTOCAD

· MS Office at least to intermediate level

· Able to work independently with minimal supervision

· Able to work under tight deadlines and schedules

· Good technical and communication skills

· Able to converse in both English & preferably Mandarin as required to liaise with Mandarin speaking site workers, subcons/vendors

Duties & Responsibilities

· Coordinate piping design with other engineering disciplines

· Prepare piping layouts, general specifications and documents according to project standards.

· Analyze and interpret stress/vibration results, offering recommendations for piping system designs.

· Develop piping layouts for critical equipment like compressors and reactors, in 3D CAD if possible

· Review project documentation such as scope of work, schedules, and design basis.

· Assist in planning and organizing piping engineering activities, including manpower requirements and schedules, ensuring alignment with project scope and budget.

· Able to do material take-off (MTO) and ensure conformance with company design standards and compliance with project specifications, codes, and industry practices.

· Participate in inter-department coordination on all project-related issues

· Support field engineering during construction and advise on installation and testing.

· Conduct site visits

· Any other relevant tasks as assigned by Project Manager

Qualifications & Other requirements

· Diploma/Degree in relevant industry. Safety certifications an added advantage

· Min. 3-year working experience in a construction firm

· Ability to work well in high volume, fast-paced environment as a member of a collaborative team

· Singaporean or Singapore PR preferred

Job Responsibilities:

1) Conceptualize all aspects of mechanical & electrial design and engineering, basis of design, scope of work, development of construction documents and execute the project with the detailed designs.

2) Assist and support the Project Manager in handling and monitoring the progress of projects to ensure that work on site is on schedule.

3) Liaise and coordinate project site works with consultants, vendors, suppliers and sub-contractors.

4) Ensure that all works carried out exceeds industry standards and are in compliance with local legislations, QHSE requirements and other regulations.

5) Arrange timely and consistent communication sessions with internal and external stakeholders.

6) Manage the detailed mechanical design of municipal scale wastewater treatment systems (if needed).

7) Assist in proposal preparation; contract preparation and negotiation; coordination with regulatory agencies; project planning, budgeting, and scheduling.

8) Able to interpret Mechanical and Electrical schematic drawings issued by the Consultant and prepare the tender proposal.

Job Requirements:

1) Degree in Mechanical or Electrical Engineering or any equivalent qualification recognized by PEB.

2) Minimum 3 to 5 years of relevant working experiences.

3) Preferable infrastructure, building services, possess Environment, Water or Waste Water Engineering experiences.

4) Able to communicate clearly with people at all levels about goals, responsibility, performance, expectations, and feedbacks.

5) Manage various sub-contractors for Building services.

Skills and experiences required

· Minimum 5 years of hands-on experience in the construction industry in Singapore

· Demonstrated experience in managing and co-ordinating large-scale construction projects effectively, within budget and timeline, performing as a Project Manager role

· Willing to work extended hours and/or on weekends & public holidays when urgently required

· A team player with initiative, drive and a positive attitude

· Possess Construction Safety Course for Project Manager Certificate (CSCPM)

· Singaporean / Singapore PR preferred

· Preferably able to commence immediately

Duties & Responsibilities

· Able to plan, oversee and manage all phases of company construction projects

· Develop and maintain project schedule, ensuring projects are delivered on time, within budget and to the highest quality standards while adhering to local building regulations and safety requirements.

· Provide the direction in construction planning to ensure overall construction progress is based on schedule of works.

· Manage Client relationship and expectations throughout the project lifecycle.

· Manage all coordination and communications with Consultants, Architects, Subcontractors and authorities (BCA, URA, etc) to ensure smooth project execution

· Monitor project costs and implement effective cost control measures

· Oversee project documentation including Temporary Occupation Permit (TOP) and Certificate of Statutory Completion (CSC)

· Lead and motivate project teams

Qualifications & Other requirements

• Degree in Civil Engineering, Construction Management or its equivalent
• At least 6 years of relevant experience
• Knowledge of LTA regulations and BCA standards.
• MS Office at least to intermediate level

Skills and experiences required

· Proficient in AUTOCAD & REVIT

· Knowledge of BIM (Building Information Management) will be an added advantage

· Minimum 3 – 5 years of relevant experience working in M&E construction or similar capacity

· Able to work under tight deadlines and schedules

· Meticulous and strong in construction detailing

· MS Office at least to intermediate level

Duties & Responsibilities

· Prepare contract documentation drawings for preliminary, construction and as-built status

· To work with Project Managers, Project Engineers and to co-ordinate with consultants as well as main and sub contractors on interpretation of drawings

· Prepare shop drawings for Mechanical system

· Ensure drawings are compliant with the regulatory specifications

· Ensures qualitative and timely delivery of all drawings and maintain soft copy of archive drawings

· Attend weekly meetings

Qualifications & Other requirements

· Diploma in Mechanical/Electrical / Higher NITEC holders or its equivalent

· Willing to work extended hours and/or on weekends & public holidays when urgently required

· A team player with initiative, drive and a positive attitude

· Singaporean / Singapore PR preferred

· Preferably able to commence immediately

Job Description & Requirements

Responsibilities

• Develop arrangement and detail conceptual, FEED, studies and detail design drawings of high technical quality and professional consistent presentation ensuring clarity and ease of construction.

• Generate 2D and 3D piping design deliverables such as model specifications, catalog items, piping layouts and studies, support drawings and pipe stress isometrics.

• Perform 3D model clash checks, prepare reports for inter-discipline resolution and participating in clash resolution meetings.

• Review vendor documents and provide comments for piping and equipment interfaces.

• Ensure design deliverables are completed and issued per project specifications, MDR and project Level 2 & 3 procedures, and within agreed schedules.

Requirements

• Minimum 8 years of experience in piping 3D and P&ID drawings in Oil & Gas industry supporting offshore projects, preferably FPSOs.

• Proficient in design programs E3D, AutoCAD, MS Offices, NavisWorks

• Able to understand the functional requirements from Piping Engineers and draft layout drawings with correct representations as per Industry & Company Standard.

• Able to manage markups, comments & coordination with relevant engineer

1. Involve in Programming, Scheduling, and Progress tracking of projects·

2. Co-ordinate with Site Supervisor and Sub-contractors on progress matters and prepare monthly and weekly reports·

3. To develop, monitor, and review equipment and manpower deployment plans for project sites·

4. To perform monthly/weekly/daily project progress reporting activities·

5. To monitor the progress of projects and Update the management for any schedule variances·

6. Act as a point of contact and communicate project status to all participants·

7. Any other ad-hoc assignment being assigned from Superior·

8. Knowledge of Plumbing/Sanitary Works an added advantage.

Job Responsibilities:

• Prepare import/export documents
• Coordinate with vendors/customers for delivery arrangements
• Work with logistics partners to ensure timely and accurate shipments
• Ensure shipment documents comply with customs regulations
• Ensure timely invoicing of shipments as per company KPIs
• Maintain accurate and up-to-date shipping records
• Monitor production schedules and release work orders to meet shipment deadlines
• Prepare and review quotes based on customer requests
• Review contracts to ensure consistency with quotes
• Support purchase order generation, order confirmation, and delivery

Requirements:

• Minimum GCE O level
• Minimum of 1 years of work experience as Administrator
• Preferred with knowledge of SAP
• Must be detail-oriented and strong organizational skills
• Competence with Microsoft Office
• Good personality and able to handle customer queries

Job Description:

• Experience in apply /renewal /cancellation of work permit, S Pass & EP including workers' repatriation
• Monthly payroll including submission of monthly CPF & FWL
• Annual submission of income tax IR8A, NS Claim and others
• Submission of Tax clearance
• Update and maintain Personnel data file
• Prepare Employment Contract
• WICA Insurance Claim
• Take care of Dormitory & Catering arrangement for workers
• Arrangement of skilled Course enrollment for Workers
• Co-ordinate with Supervisor & prepare schedule for daily workers allocation at site
• Planning of company annual event
• Provide support in administrative tasks
• FWMI & WICA Renewal
• Submission of Government Claims such as maternity leave, childcare leave etc...
• Handling of Government Grant application such as Career Support Programme, Worklife Grant etc...
• Any other ad hoc duties as assigned

Requirements:

• Minimum 5 years Experience in full spetrum of HR Duties preferably in construction sector
• Must be strong in administrative support/ skills
• Able to work independently, dynamic with initiative within timeline
• Knowledge of Times Payroll software is an added advantage
• Able to communicate in both English & Chinese (to liaise with associates)

2. SKILLS

Childcare

Microsoft Office

Microsoft Excel

Construction

Site Planning

Tax

S

Administration

Payroll

Income Tax

Administrative Support

Catering

Maternity

Able To Work Independently

Summary

We are looking for an enthusiastic and skilled AI Researcher to join our dynamic research team. The ideal candidate should have a strong foundation in artificial intelligence and machine learning, coupled with the passion to innovate and improve the capabilities of existing solutions. You will work on cutting-edge research projects, develop new algorithms, and contribute to the advancement of our AI initiatives, via both independent and collaborative research efforts. The role involves leveraging AI/ML algorithm framework, such as TensorFlow and PyTorch, to develop cutting-edge generative AI/ML solutions. Responsibilities include designing and conducting scientific experiments, utilizing core AI/ML knowledge to develop novel AI solutions in cloud or on-premises environments. The candidate will also be expected to collaborate with the team, participate in code reviews, architecture discussions, and create comprehensive documentation. The ideal candidate should possess a strong foundation in statistical analysis, machine learning, deep learning, generative AI, and text representation techniques. Additionally, the candidate should also have excellent communication skills, a strong work ethic, and a passion for delivering highquality, innovative solutions.

Responsibilities:

• Conduct novel and cutting-edge research in AI and machine learning. Research areas include but are not limited to computer vision (CV), natural language processing (NLP), automatic speech recognition (ASR), etc.
• Design, implement, and optimize algorithms and models for various applications employing supervised, self-supervised, semi-supervised, or unsupervised learning.
• Collaborate with our partners and engineers to apply research findings to real-world problems and product development.
• Communicating regularly with supervisor and Research leads on scientifical progress, insight and research direction.
• While publishing research papers in reputable journals and conferences is valued, it is not a strict requirement for this role.
• Contribute to other program-related projects.
• Collaborate with engineering team to translate researched technology (low TRL) to engineering (high TRL).
• Candidates applying for senior staff positions are expected to mentor and support team members (or cross-team members) in technical advising.
• Adhere to ethical research and coding best practices with timely documentation and updates.

Requirement:

• PhD or Master degree in Computer Science, Computer Engineering, Statistics, Engineering, or related technical field.
• 2-4 years of experience in research and development, specifically in one or more of the following areas:

1. Computer vision.
2. Natural language processing, specifically in large language model (LLM) core component, e.g., joint entity relation, information retrieval, prompt engineering, reasoning, sentiment analysis, guardrail, etc....
3. Generative AI, specifically in generating synthetic data.
4. Audio analytics.
5. Large vision language model (LVLM),
6. Embodied AI.

• Proficiency in programming languages such as Python and/or C/C++. Experience with deep learning frameworks like TensorFlow, Keras, and/ or PyTorch.
• Demonstrate an analytical mindset with adept problem-solving skills.
• Stay abreast of the latest research developments in AI through literature review, attending conferences, and tech-sharing sessions with fellow team members.
• Exhibit a strong drive to deliver optimal solutions within tight timelines.
• Excellent analytical, critical thinking, and problem-solving skills.
• Strong communication and organizational skills. Mentoring experience and skills are a plus.
• Comprehensive documentation of technical specifications, architectural designs, and best practices.

The Senior Design Engineer is responsible for assisting the Senior/Technical Manager on structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis.
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications, and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers, and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required.
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the workplace.

Skills & Requirements

• Education: Minimum Degree in Civil Engineering from accredited Universities
• Experience: Prior 6 to 8 years of experience in design and construction
• At least 5 years of civil MRT station experience (have completed at least 1 MRT station project)
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software.
• Well versed in Autocad and BIM software is preferred.
• Technical Competencies: Technical expertise and knowledge in Foundation, Structural and Civil works (MRT Stations).

A summary of the responsibilities of this position are, and not limited to, as follows:

• Handle and determine quantities, shapes, sizes and location of rods from drawings and sketches.
• Plans and prepares rebar schedule (per area)/cutting list schedule according to design specification.
• Prepare quantity of steel material needed for design execution.
• Control and minimize material wastages.
• Compile and prepare material wastage summary; generate monthly report.
• Other adhoc duties as assigned by immediate supervisor/management.
• Adherence to safety practices in the workplace.

Technical Competencies

• Technical expertise and knowledge in rebar structural works
• Good Knowledge on sequence of works
• Ability to read structural drawing in preparing rebar’s quantity

Qualifications and Education Requirements

• At least 5 years of Civil Engineering experience
• Familiar with relevant drawings, specifications and details
• Completed at least 1 Civil project
• Technical expertise and knowledge in rebar structural works
• Good Knowledge on sequence of works
• Ability to read structural drawing in preparing rebar’s quantity

Resource Management & Engineering provides manpower and engineering solutions to oil, gas, and waste management companies.

Your Key Responsibilities include:

• Operate our prime movers to deliver and collect containers / Isotanks to and from our customers
• Any other tasks as assigned by superior

Qualifications and Job Requirements:

• Holds at least a Class 4 license
• At least 1 year of working experience in the related field is required for this position

1. Consult with clients and understand their requirements.
2. Calculate bill of quantities, cost of materials, labour and timeframes.
3. Prepare tender packages and contracts.
4. Evaluate and estimate the project value.
5. Able to understand complete ACMV system.
6. Must be familiar with piping materials, fittings and their standards.
7. Ensure compliance with regulations and quality standards.
8. Analyse on progressive clients and variations of orders.
9. Familiar in project schedule with competitive timeframe.
10. Able to engage with different piping suppliers for material costs.

Position Requirements

• Educational Qualification: Not required
• Experience: Minimum 4 years of practical experience as a carpenter, demonstrating expertise in carpentry and woodwork projects

Key Responsibilities

• Perform carpentry tasks including cutting, shaping, and installing materials to meet project specifications
• Read and interpret blueprints and technical drawings
• Work with a variety of hand tools and power tools to create precise structures and finishes
• Collaborate with team members to ensure timely and accurate completion of projects
• Maintain a clean and organized workspace, adhering to safety guidelines

Terms and Conditions

1. Accommodation: Candidate must stay in the company-provided lodge.
2. Availability: Candidate must be willing to work beyond regular working hours as needed.
3. Probation Period: This position includes a three-month probation period, during which performance will be evaluated for permanent placement.

Skills and Competencies

• Proficiency in carpentry techniques and familiarity with woodworking tools
• Attention to detail and commitment to delivering high-quality work
• Ability to work independently and as part of a team
• Strong physical stamina and safety awareness

Workplace Safety and Health Officer

5.5 days, LTA projects

Primary Objective

Ensure the safety and well-being of workers at construction sites, carry out duties in a safe and health environment, free from hazards and risks.

Preventing accidents, protecting lives, and promoting a culture of safety within the construction

Job Responsibilities

*Evaluate and inspect the environment, equipment and processes in project sites to ensure compliance with government safety regulations and industry standards.

*Conduct periodic environment, health and safety audits on site with Project Manager to ensure compliance with ISO 9001, ISO 14001 and OHSAS 18001 standards.

*Formulate and administer comprehensive Risk Management and review safe work procedure.

*Investigate accidents to identify their causes and find ways to prevent them in the future.

*Conduct safety related training for the staff and sub-contractors including foreign workers.

*Coordinate implementation of corrective and preventive action.

*Liaise with MOM, NEA, LTA and other government authorities on environment, health and safety matters.

*Other ad-hoc duties assigned from time to time.

Job Requirements

*Degree or Diploma in Safety, Engineering or related qualifications with LTA experiences.

*Minimum 5 years of safety experiences in the construction industry.

*Registered WSHO with MOM and ECO with NEA.

*High degree of initiative with strong analytical, communication and interpersonal skills.

*Familiar with LTA, HDB and other safety requirements

S. A. ENGINEERING PTE LTD

Site Supervisor

Salary range – S$2,000.00 to S$5,000.00

Job Description – Site Supervisor

Responsibilities

- To closely monitor and supervise assigned workers in construction sites

- To apply & ensure all necessary permits are approved before daily work commencement

- To conduct Tool-Box Meetings (TBM) and brief the entire team on work location and target completion for area assigned

- To ensure that the entire team on-site strictly follow and abide to any safety protocols and ensure safe works

- To report to the Site Engineer / Project Manager on all work-related matters arising from project site assigned to

- To accurately update the site management on work progress, individual worker performance, as and when requested

- To keep record of daily activity on site in written form for submission to site management / HQ

- Any other ad hoc duties assigned by the General Manager or the Managing Director

Requirements

- Must have attended Building Construction Supervisor Safety (BCSS) course from a recognized training centre with record of completion properly updated on the Ministry of Manpower (MOM) website

- Must have attended specific training courses, with record updated on MOM website, that qualifies the individual to apply for various permits (E.g. Work-At-Height permit by those with “Manage Work-At-Height” certificate / Formwork check-list by those with “Formwork Supervisor” certificate)

- Experienced in handling various fast-paced construction sites

- Able to read and understand construction drawings

- Must have good interpersonal / social skills to explain, communicate, liaise, negotiate with the Managing Director, own construction team, main-contractors and/or subcontractors

Expectations

- Have good work ethics and shows camaraderie with other employees

- Have good presentation skills (Organized and neat in preparing documents)

- Have good interpersonal skills

- Is self-motivated and willing to learn

- Able to perform in challenging environments

- Values respect, responsibility and humility

Interested candidates who meet the qualifications and requirements may email their resumes.

Only short-listed candidates will be notified

Reporting to the Senior Accountant to support the Accounts Payable, Expense & Cashfow function of the Company & its subsidiaries.

The role encompasses a comprehensive range of Accounts Payables functions, including, but not limited to, processing invoices for payment to suppliers, data entries in accounting systems, preparing payments, liaising with suppliers to address invoices/ payment issues and period end closing activities which includes maintaining audit schedules on a monthly basis .

This role would also be required to handle fixed assets management and reconciliation and cashflow planning to ensure sufficient fund for payments. The candidate must be versatile and willing to accept job rotation to other accounting functions such as Accounts Receivable and other ad-hoc finance-related projects when necessary.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Handle and determine quantities, shapes, sizes and location of rods from drawings and sketches.
• Plans and prepares rebar schedule (per area)/cutting list schedule according to design specification.
• Prepare quantity of steel material needed for design execution.
• Control and minimize material wastages.
• Compile and prepare material wastage summary; generate monthly report.
• Other adhoc duties as assigned by immediate supervisor/management.
• Adherence to safety practices in the workplace.

Skills & Requirements

• 2 - 4 years of Civil Engineering experience
• Familiar with relevant drawings, specifications and details
• Completed at least 1 Civil project
• Technical expertise and knowledge in rebar structural works
• Good Knowledge on sequence of works
• Ability to read structural drawing in preparing rebar’s quantity

Responsibilities:

• Plan, design and administer contract/project of mechanical and electrical engineering works for building service including Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Mechanical / Electrical / Building Services Engineering.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

Responsibilities:

• Plan, design and administer contract/project of mechanical and electrical engineering works for building service including Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Mechanical / Electrical / Building Services Engineering.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

Responsibilities :

- Attend enquiries by phone/emails.

- Coordinating with clients about service appointment

- Update data, prepare quotation and related documents

- On-site visit to clients' premises

- To perform daily administrative works and other duties as assigned

Requirements :

- Candidates must possess at least Diploma, Degree or equivalent.

- At least 3 years of working experience in the related field

- Preferably specializing in air conditioning , electrical work

- Preferably with driving license

- Able to comummnicate with Japanese Customers

Additional info :

- Monday - Saturday

- Salary will be commensurate with qualification and experience

We regret that only shortlisted applicants will be notified.

The Senior BIM Designer will create and manage digital models of building structures and systems using Building Information Modeling (BIM) software. The ideal candidate should have a solid technical background, excellent problem-solving skills, and be able to work collaboratively and with minor supervision from engineers/coordinators.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Lead modeling efforts on projects working with BIM designers to complete deliverables for each discipline.
• Setup of Revit views for use by the Project team including electronic document filing and all other facets of the electronic drawings and/or model
• Develop constituent parts of the information model in connection with specific task
• Collaborate with architects, engineers, and other stakeholders to ensure model accuracy and completeness
• Production of project output and ownership of model information
• Maintain and update BIM models throughout the project lifecycle
• Implement BIM standards, processes, and workflows to improve efficiency and accuracy.
• Train and mentor junior BIM Modeler to ensure they are equipped to handle complex projects.
• Adherence to safety practices in the workplace.

Skills & Requirements

• Education: Minimum Diploma or Bachelor's Degree in Architecture, Engineering, Construction Information Technology or relevant field.
• Minimum 5 years of experience in BIM modelling and Coordination work.
• Proficient in BIM software such as Revit, Navisworks, and AutoCAD.
• Strong attention to detail and ability to manage multiple projects simultaneously.
• Knowledge of construction and building materials is a plus.
• Strong communication and leadership skills

Value Add of Position

• Knowledge in BIM for design coordination.
• Understand and participate in the implementation of Virtual Design Construction (VDC) concept.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Responsibilities:

• Operate 4-5 axis CNC Vertical Milling Machines and Horizontal Boring Machines.
• Set up machines accurately, including tooling, fixtures, and workpieces, based on engineering drawings and job specifications.
• Keep up with the housekeeping requirements at the workstation.
• Carries out duties as assigned by Foreman.

Requirements:

• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre.
• Understanding of tooling criteria, machining applications and process documentation.
• Min ITE Technical Certificate, preferably in Precision Metal Machining.