- Developing and implementing strategies to increase profitability and market share.

- Supervising and guiding the sales team, monitoring their performance, and providing incentives to motivate them

- Ensuring the store is clean, well-stocked, and that point-of-sale processes are running smoothly

- Preparing sales reports, forecasts, and budgets for senior management

Job Description & Requirements

The Technical Manager is designated as the Design Manager of the LTA MRT project, in charge of design management of the project and managing the consultant and client’s expectation to deliver the project within budget.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Overall responsible for all permanent and temporary works design and design optimization by managing the appointed consultant to ensure that project is delivered within budget.
• Responsible for handling client and consultant, coordinate with consultants, client and authorities for design matters and submission.
• Oversee the shop drawings submission and issuance, planning and control delivery of design schedule, monitoring the progress.
• Coordinate and support the construction and other departments within the project to fulfil design requirement.
• Resolve all technical queries and submit/raise Request for Approval / Information (RFA/I) to concern parties to clarify any ambiguous design details.
• Review technical specifications and proposals submitted by Consultants / Subcontractors / Suppliers and produce procurement specifications.
• Adherence to safety practices in the workplace

Skills & Requirements

• Education: Degree in Civil Engineering from a recognized university endorsed by PE Board or qualification acceptable to the Commissioner of Building Control
• Experience: Minimum 12 years of engineering experience in delivering projects with at least 8 years of experience in design of civil and infrastructure project
• Extensive experience within a construction environment demonstrating accountability and ability to meet commitments through key internal stakeholders, clients, and staff at all levels.
• Technical Competencies: Technical expertise and knowledge in Structural, Architectural Design
• Proven track record of managing teams and delivering projects from start to hand-over

Requirements: Minimum 3 years experience in installation ACMV system and installation of ducting, fresh-air fan, exhaust fan, commercial Kitchen hood including control panel. Knowledge of electrical control circuit and should be very hard working

• Perform maintenance, repair or overhaul of Air compressor efficiently and complete them in a timely manner.
• Guide and lead the team of technicians who lack experience or knowledge in troubleshooting, diagnostics and best practices in the said operation.
• Write and submit Service Reports timely in clear and logical manner.
• Communicate with Service Manager, Sales Department and Customers on job related issues, recommendations, unforeseen problems and to identify potential risks to the team and/or the equipment or job.
• Ensure safety observances on site both for self and team and highlight safety risks to Manager.
• Accountable for the upkeep of equipment and tools used as well as proper housekeeping of your work surroundings.

Job Qualifications:

• High competency in the operations, maintenance and repair of major Air Compressor brands (Oil lubricated screw and Oil Free) such as Atlas Copco, Ingersoll Rand, Kobelco etc.
• Familiar with the operations, maintenance and repair of Air treatment equipment like Air Dryer and Filter.
• Knowledge of Vacuum pumps, blowers or other rotating equipment such as pumps is a plus.

Job Description:

• Supervise and lead the construction team to lay down construction milestone.

• Manage construction activities, ensuring timely and smooth progress of the operations.

• Responsible for implementing the work plan and attending project meetings

• Resolve design site problems encountered during the construction period.

• Producing site progress report to management.

• Monitor and ensure subcontractors comply with specified requirements.

• Identify and comply with all applicable statutory/ regulatory requirements related to project.

• Coordination and sequencing of works of different subcontractors.

• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks.

• Respond swiftly to work delays, emergencies and other problems.

• Clear communication to external parties including client, subcontractors, consultant, vendor etc on project needs, requirements and schedule by means of daily construction oversight.

Job Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

• At least 10 Years of working experience in the related field is required for this position.

• Preferrable 10 years of project management experience in the high rise projects and mixed development in building projects

• Required Skill(s): leadership, technical, planning, coordination, multi-task

• Preferably Manager specialized in Engineering - Civil/Construction/Structural or equivalent.

Responsibilities

• Lead, motivate, and support a large team within a time-sensitive and demanding environment, including career development plans for direct reports and problem resolution
• Manage data collection for the updating of metrics to achieve productivity targets, reduce cost per unit, eliminate errors, and deliver excellent customer service
• Partner with cross-functional teams to improve proprietary tools and systems
• Work closely with legal and safety departments to ensure that activities remain compliant
• Oversee materials and inventory
• Conduct budget reviews and report cost plans to upper management

Required skills and qualifications

• Two or more years of proven success in an operations management role
• Strong skills in budget development and oversight
• Excellent ability to delegate responsibilities while maintaining organizational control of branch operations and customer service
• Proficiency in conflict management and business negotiation processes
• Knowledge of business productivity software and an aptitude for learning new applications

Preferred skills and qualifications

• Bachelor’s degree (or equivalent) in operations management, business administration, or related field
• Working knowledge of management software programs, including NetSuite, QuickBooks, and CenterPoint Payroll
• Strong IT skills, including database development
• Multiple years of financial and account reporting experience
• Ability to communicate in more than one language

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

Job Descriptions:

- General Administrative Work, e.g., Data Entry, Filing, Record Keeping

- Submission of Documents, Drawings, Letters and Transmittal prepared by Executive Staffs

- Supporting Authority Submission by Executive Staffs

- Regular Updating of Record and Summary to Company Managers

- Maintain Proper Organization of Filing System, Storage of Documentation, and Information

- Handling General Enquiries via Email or Phone

- Other supportive ad-hoc office requirement

Requirements:

- Candidate must possess at least a GCE “O” / “A” levels or Polytechnic Diploma in any field

- No work experience required

- Required Skill(s): Microsoft Office

- Preferably entry level specialized in Clerical / Administrative Support or equivalent

- Good Command of English, Ownership of Tasks

- Friendly and Pleasant Personality

We seek an experienced and efficient Civil and Structure Engineer for our construction department. As a site engineer, you will monitor diversified aspects of construction project management. This will include planning, coordination, and supervision of on-site activities. You will ensure all aspects of the project align with engineering and design specifications, industry standards, and construction regulations. You will also foster effective communication by liaising with contractors, subcontractors, and other project stakeholders.

Roles & Responsibilities:-

• Supervision on Piling works/Diaphragm walls
• Supervision on RC works/ ERSS
• Overall in charge and supervise construction work and earthwork (By area)
• Assist in the coordination of traffic and drain diversion
• Supervise temp work
• Supervising and managing construction projects from start to finish, ensuring adherence to project plans and specifications.
• Analyzing and interpreting engineering drawings, survey reports, and other technical documentation to guide the construction process.
• Planning and overseeing allocating resources, materials and equipment to optimise project efficiency.
• Monitoring project costs, identifying cost-saving opportunities and adhering to budget constraints.
• Providing technical guidance and expertise to resolve construction-related challenges.
• Able to attend early morning site meetings and other ad hoc duties.

Required skills and qualifications

• A bachelor’s degree in civil engineering from an accredited university or college.
• 3-5 years of experience as a site engineer, civil engineer or an equivalent role.
• Proficiency in managing and supervising construction projects.
• Experience with Microsoft Office Suite, GIS, AutoCAD, and other software.
• Ability to manage multiple construction projects.
• Strong knowledge of construction methods, materials, and regulations.
• Competent in assessing, interpreting, and presenting survey reports and other critical data for stakeholders and shareholders.
• Excellent project management and organizational skills.
• Strong problem-solving and decision-making abilities with effective communication.
• Ability to work effectively in a team and coordinate with multiple stakeholders.
• Attention to detail and a focus on delivering high-quality results.
• Well-versed in earth and civil work
• Positive and responsible attitude

Preferred skills and qualifications

• Excellent interpersonal, leadership, and management skills.
• Knowledge of sustainable construction practices.
• Understanding of budgeting and cost control.

Job Description & Requirements

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams,

Job Description:

• To lead the BIM team and monitoring the work progress.
• Prepare project models and construction documents using BIM software.
• Establish project workflows throughout all project phases.
• BIM project set-up and continued project administration.
• To be responsible for clash co-ordination & BIM co-ordination on construction site.
• Prepares and update Revit Model (Co-ordination drawings).
• Prepares 2D and 3D shop drawings and as-built drawings.
• Liaise with Project Document Controller for accurate data transfer.

Job Requirements:

• Possess BIM certificate.
• 5 years' working experience as a BIM Engineer.
• Software knowledge required: Revit Certificated specialist, Navisworks.
• Excellent communication and problem solving skills.
• Experience in adoption of BIM processes in large construction projects from tender to completion of project will be an advantage.

Job Responsibilities:

Site Admin:

- Support the Site Project Manager on all site administrative works

- Format letters of reports needed for project progress submission

- Manage the document control systems e.g. filing, tracking of all incoming and outgoing document correspondences and transmissions for both electronic and hardcopy.

- Maintain filing system and archives

- Application of training courses for workers and submit training course approvals to HR

- Responsible for site office daily administrative works including submission, application and getting approval of site passes from relevant authorities

- Raising Purchase Orders for all stationery and maintain of site office supplies and equipment

- Coordination between HQ, Site Team and Client for site access, transport arrangement, onboarding of new staff, etc

- Maintain site attendance e.g. timesheet, leave application / approval and record (including OT timesheet)

- Collation of receipts to prepare for Petty Cash claims submission

- Supports Site Office events or visits

- Ensure the proper functioning of the Site Office

- Any other ad-hoc duties

- Perform any other ad-hoc duties as requested or assigned

Document Controller:

- Plan and record documents flow (in and out) from all necessary parties, including Clients and sub- contractors.

- Implement workflows and collate issue and receive documents in accordance with project requirements for the development, review and approval of design documentation and all other procedures, instructions, product certification and records that are subject to review and approval.

- Implement an efficient project-related documents control register, database and hard copy filing system.

- Implement Project Document Management System and processes.

- Ensure document submissions are in accordance and compliant with project document formats and requirements.

- Establish and maintain a correspondence system.

- Record issues and track location of control documents and drawings.

- Issue letters and receipts concerning the documents in circulation.

- Ensure current versions are maintained of all documents subject to revision and ensure current versions of documents are issued to required project parties.

- Coordinate storage and archiving of project and organisational records

- Ensuring the secure destruction and disposal of sensitive documents.

- Ensure the documents are managed in strict confidentiality.

- Perform all duties in accordance with company policies, processes, systems and procedures.

- Perform any other ad-hoc duties as requested or assigned

Requirements:

- Diploma/Degree in Business Studies/Administration/Management or other associated disciplines

- At least 3-5 years' experience in document control position in construction industry

- Proficient in Microsoft Office Application (Word, Excel, Power Point)

- Detail-focused document organizing abilities.

- Time-oriented approach to handling queries and tasks.

Responsibilities:

• Responsible for planning and execution of projects in accordance to the drawings and schedule.
• Supervise and coordinate site activities to achieve daily work schedules and to ensure compliance with project requirements.
• Liaise with clients, suppliers, and government authorities on project related issues.
• Attend site meetings.
• Ensure quality of works is achieved and safety regulations are complied with.
• Manage manpower on site.

Requirements:

• Degree in Civil Engineering.
• Experience in dredging, reclamation, or marine engineering industry is an added advantage.
• Proficient in Autocad and Microsoft Office.
• Possess supervisory skills.
• Independent, diligent and highly motivated.
• Able to communicate with people from all levels.
• A self-starter and achiever with the ability to solve problems and meet project datelines and customer requirements.
• At least 2 years of experience in Singapore.

Responsibilities:

• Responsible for planning and execution of projects in accordance to the drawings and schedule.
• Supervise and coordinate site activities to achieve daily work schedules and to ensure compliance with project requirements.
• Liaise with clients, suppliers, and government authorities on project related issues.
• Attend site meetings.
• Ensure quality of works is achieved and safety regulations are complied with.
• Manage manpower on site.

Requirements:

• Degree in Civil Engineering.
• Experience in dredging, reclamation, or marine engineering industry is an added advantage.
• Proficient in Autocad and Microsoft Office.
• Possess supervisory skills.
• Independent, diligent and highly motivated.
• Able to communicate with people from all levels.
• A self-starter and achiever with the ability to solve problems and meet project datelines and customer requirements.
• At least 2 years of experience in Singapore.

Assist site manager to coordinate and supervision of structural work

Supervise site building works

Assist site manager to liaise with main-contractors

Handle any other ad-hoc duties and tasks assigned

Responsibilities:

• Responsible for planning and execution of projects in accordance to the drawings and schedule.
• Supervise and coordinate site activities to achieve daily work schedules and to ensure compliance with project requirements.
• Liaise with clients, suppliers, and government authorities on project related issues.
• Attend site meetings.
• Ensure quality of works is achieved and safety regulations are complied with.
• Manage manpower on site.

Requirements:

• Degree in Civil Engineering.
• Experience in dredging, reclamation, or marine engineering industry is an added advantage.
• Proficient in Autocad and Microsoft Office.
• Possess supervisory skills.
• Independent, diligent and highly motivated.
• Able to communicate with people from all levels.
• A self-starter and achiever with the ability to solve problems and meet project datelines and customer requirements.
• At least 2 years of experience in Singapore.

Roles and Responsibilities

1. Driving within and Outside Construction Site,
2. Disciplined, Responsible, punctual and Reliable,
3. Minimum 3 years Heavy Vehicle Driving Experience ,
4. Familiar with Singapore Roads and comply to Traffic Regulations,
5. To Perform all Duties assigned by the Supervisor,
6. To maintain the vehicles condition, perform basic preventive maintenance,
7. must possess Class 4 Driving Licence and No demerit points,
8. Conduct inspection daily to ensure vehicle is safe.

Responsibilities

· Establish, execute plan to expand customer base and explore new areas/segments to increase sales revenue.

· Engage with customers for queries, resolve issues and follow up on inquiries.

· Respond timely to customer orders, confirm delivery dates, coordinate changes and expedite requests from customers.

· Manage and maintain a database of customer records and customer pricing.

· Prepare and track sales quotations and maintain sales pipelines.

· Provides comprehensive market intelligence, benchmarking, constant updates on price comparison cum movement in the marketplace.

· Establish rapport and build good customer relationship.

· Provides sales performance report and timeline to achieve target.

· Willingness to undertake ad hoc projects being assigned by the management.

Requirements

· Diploma level in any discipline.

· Minimum 2 years of experience in sales, sales admin support or customer service experience.

· A team player and adaptable in a highly competitive environment.

· Possess excellent interpersonal and communication skillsets.

· Strong planning, presentation and report writing skills.

· Motivated and enthusiastic with a strong drive to achieve sales target.

· Computer literacy with experience in using Microsoft Office applications.

· Independent, resourceful and enjoy communicating with all levels within an organization.

· Able to start work immediately or given short notice.

· Class 3 driving licence and own transport.

The BIM Designer will be responsible for creating and managing digital models of building structures and systems, using Building Information Modeling (BIM) software. The ideal candidate should have a strong technical background, excellent problem-solving skills, and be able to work collaboratively with cross-functional teams.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Develop constituent parts of the information model in connection with specific task.
• Collaborate with architects, engineers, and other stakeholders to ensure model accuracy and completeness.
• Production of project output.
• Ownership of model information.
• Maintain and update BIM models throughout the project lifecycle.
• Create Revit worksets and understanding of the Revit work-sharing process. Input marked‐up drawings into Revit
• Download drawings and information from the Web, SharePoint, or project websites (FTP, etc.
• Adherence to safety practices in the workplace.

Skills & Requirements

• Education: Minimum Diploma or Bachelor’s Degree in Architecture, Engineering, Construction Information Technology or relevant field
• Experience: Minimum 2 years of experience in BIM modelling
• Proficiency in BIM software such as Autodesk Revit, AutoCAD, or Bentley MicroStation
• Strong communication and collaboration skills, with the ability to work effectively in a team environment
• Familiarity with construction industry standards and practices

Value Add of Position

• Knowledge in BIM for design coordination.
• Understand and participate in the implementation of Virtual Design Construction (VDC) concept.

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Job Responsibilities:

- To be responsible for purchasing and sourcing of general material / hardware for project site according to product evolution, specification and requirements.

- To handle price negotiation with suppliers, vendors and price comparison for management’s approval.

- To generate Purchase Order according to Material Requisition from site personnel.

- To generate monthly purchase reports.

- To ensure and maintain proper record and filing system in department.

- To attend to any ad-hoc duties as assigned by the Manager.

Job Requirements:

- Possess Diploma/Degree in Purchasing and Materials Management or equivalent.

- At least 3 years of relevant experience.

- Proficient in Microsoft Office.

- Willingness to learn.

- Able to take stress due to fast paced environment.

- Meticulous and organized.

- Good negotiation, interpersonal and communication skills.

- Able to start work immediate will be added advantage.

Roles & Responsibilities:

1. Lead and manage high-pressure construction projects, ensuring top-quality standards and adherence to tight deadlines.

2. Adapt sun exposure or hazard environment

3. Need to hands-on and do not mind to getting hands dirty

4. Must be able to work in day or night shift if required

5. Must be able to work in weekend or public holidays if needed

6. Collaborate with stakeholders, architects, and vendors to address and resolve complex challenges.

7. Present detailed reports with prompt, effective solutions for critical issues.

8. Exhibit flexibility in working extended hours, weekends, and traveling frequently between sites.

9. Perform other ad-hoc duties as assigned.

Requirements:

1. Bachelor's degree in Civil, Mechanical, or Electrical Engineering.

2. Proficiency in design and drafting software, such as AutoCAD, ArchiCAD, Pro/E, and Revit Architecture CAD.

3. Minimum of 12 years of construction experience, with at least 8 years in a leadership role under high-pressure conditions.

4. BCSS (Building Construction Safety Supervisor) certification is mandatory.

5. In-depth knowledge of construction equipment, safety protocols, and industry best practices.

6. Proven ability to maintain composure and excel under extreme pressure.

7. Strong communication and conflict resolution skills for effective team leadership.

8. Expertise in construction areas, including reinforced concrete works, building structural works, landscape works, and M&E fields such as electricalworks and ACMV works, as well as metal, railing, and steel structure works.

9. Physical stamina for on-site duties.

10. Willingness to travel between sites using public transportation if company transport is not provided.

11. Flexibility to travel extensively and work in varied environmental conditions.

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

Job Descriptions:

- Review and Summarize Enquiry, Identify Scope of Works and Prepare Commercial Proposal

- Quantity Checking and Preliminary Costing including getting Downstream Consultant Price

- Compile Supporting Documents for Tender / Proposal submission

- Follow Up and Negotiate on contract

- Review Terms and Conditions of Contract from client

- Prepare, Submit and Follow Up on Progress Claim, Tax Invoice and Payment Collection

- Closing of Project Account upon Project Completion

- Reporting to Senior QS / Directors

Requirements:

- Candidate must possess at least a Bachelor Degree in Quantity Surveying or Civil Engineering, Building or equivalent from a recognized university

- At least 2 Year (s) of working experience with strong knowledge of Local Construction Practices

- Effective Communication Skills and Enjoy Interacting with people at all levels

- Meticulous, an eye for Details and Sensitive to Figures / Numbers

- Positive Attitudes / Drive for Result and Willing to Learn

- Good Self-Discipline and Ownership of Task

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Engineering Manager to join their Engineering team, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities of Engineering Manager:

• Design and implement effective warehouse layouts and storage solutions.
• Lead and oversee warehouse projects from planning to execution.
• Select and manage the appropriate equipment for operational efficiency.
• Collaborate to optimize space utilization, streamline processes, and reduce costs.
• Analyze data to develop logistics strategies and improve productivity.
• Identify and validate storage solutions to boost capacity.
• Provide coaching and support to operational teams.
• Present and demonstrate process improvements to stakeholders.

Requirements:

• Min Degree in Engineering
• Min 2 years of warehouse automation experience in managerial level
• Strong communication and interpersonal skills required.
• Proficient in Microsoft Office and AutoCad

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)