Established in 2010, the Energy Research Institute @ NTU (ERI@N) is a pan-university research institute that focuses on systems-level research for tropical megacities. It performs translational research that covers the energy value chain from generation to innovative end-use solutions, motivated by industrialisation and deployment.

In 2021, Enterprise Singapore, the national standards body for Singapore, had appointed ERI@N as a Standards Development Organisation (SDO) to develop and promote standards under the Electrical and Electronic Standards Committee. This includes standards supporting emerging areas such as renewables -offshore wind/marine & solar energy, secondary batteries and cells, solid state transformers, electrical energy storage systems, and smart grids. We also work with regulators and the industry on standards for electrical installations, building & services and safety and effectiveness of electrical products and services.

We are looking for a passionate Project Manager to support the work of the SDO.

Core expertise:

Project management responsibilities include managing the identification, development and promotion of standards meeting key requirements set by Enterprise Singapore (EnterpriseSG). These include supporting standards committees under the management of ERI@N in their standard development and promotion work to ensure timely and successful delivery of new and reviewed standards. The PM should have a background in business skills, project management, budgeting, analysis and stakeholder management. Familiarity with key technologies such as power systems, electronics, solar PV, battery systems and electrification as well as understanding of commercialization is an advantage.The PM must be detail oriented, able to multitask and demonstrate the ability to be intervene decisively and proactively.

Key Responsibilities:

Standards development

• Support standards committees to identify key areas for standards development from FY 2024 to FY 2026 which includes meetings with key stakeholders and preparing new work proposals.
• Support standards committees to develop standards within the timelines and quality requirements set by EnterpriseSG and the industry. These will include managing the preparations for meetings, capturing key comments, discussions and edits, conducting public consultations, addressing public comments, preparing draft standards for publications.
• Support the standards committee leaders in managing key stakeholders within the committee and industry with aim to build consensus and address standards implementation issues.
• Support participation of standards partners in international standardization including balloting, international meetings and hosting ISO/IEC TC meetings in Singapore.

Standards promotion

• Work with standards committees and EnterpriseSG to plan and execute standards promotions events targeting key stakeholders such as industry, government agencies and regulators, research bodies and the public. This could include standards launches, case studies, seminars and workshops. The PM is also expected to develop suitable presentation materials for these events.
• Work with standards committees and EnterpriseSG on verification studies to quantitatively evaluate the adoption of standards by key stakeholders.

SDO administration

• Assist Head, SDO and colleagues to manage the SDO budget to ensure budget marksmanship are met.
• Ensure procurement guidelines for EnterpriseSG and NTU are complied with.
• Assist Head, SDO in preparation of SDO progress reports to EnterpriseSG, the Singapore Standards Council and ERI@N management.
• Assist Head, SDO in audits concerning the operations and financial issues of the SDO.

Job Requirements:

Competencies and Qualifications

• Bachelor’s Degree in Electrical Engineering/ Computer Science / Mathematics/ Physics
• Min. Years of Experience: 3 years for project manager.
• Entry level candidates are welcomed to apply but will receive title of Project Officer.
• Certified Project Management Professional (PMP) will be an advantage
• Working Knowledge in Agile Project Delivery
• Working Knowledge in Microsoft Project, Excel, Word, Power point, SharePoint
• Experience within the utility or energy and power system industry is a strong advantage
• Excellent Stakeholder management

Added advantage:

• Experience in adopting or implementing standards
• Experience in Interactive Project Management tools like Click up, JIRA.
• Experience in document management tools like SharePoint
• Experience in R&D cross-functional New Product/Technology Introduction (NPI/NTI) programs & commercialization

Other Requirements:

• Excellent written and verbal communication skills
• An effective and efficient team player with good attitude and interpersonal skills
• Self-motivated for documentation maintenance and management

We regret that only shortlisted candidates will be notified.

• Assemble and install mechanical systems for industrial, electromedical, and manufacturing purposes Implement cost-effective changes in equipment design to improve reliability and safety
• Assist mechanical engineers in developing, building and maintaining machines and tools
• Read and interpret engineering designs, plans, and diagrams for piping, transmission, and HVAC systems Prepare cost and material estimates for a project
• Test and analyze machines, tools, and components to determine their performance, strength and response to stress
• Design manufacturing implements such as jigs, dies, and moulds
• Carry out inspections to identify faults and initiate repair of mechanical systems or products
• Monitor mechanical processes to ensure conformance to standard project procedures Use CAD software and technology to prepare drawing plans and design for an engineering project
• Assemble components or machine parts to form integral or complete product unit
• Provide technical solutions to mechanical problems found in a variety of industries
• Develop and design prototypes of equipment
• Ensure compliance with health/safety procedures and regulations
• Implement quality control systems useful in evaluating and testing mechanical processes/product for consistency.
• Liase with various departments to completed the job.
• Report to Management Level

Requirements

Degree in Engineering Mechanical Engineering

Working Location : Jurong West

Working days : Monday - Friday (5 Days)

Shift Work required ( Rotation work at Saturday & Sunday)

Require to work at Night Shift

Roles & Responsibilities:

• Conduct engaging lectures and interactive sessions on engineering materials, material mechanics, and soil mechanics fundamentals
• Cover key principles and theories in engineering materials, including properties, testing methods, and selection criteria for different applications
• Prepare and deliver quality teaching materials to ensure quality conduct for both physical and real-time virtual classes
• Provide guidance and support to students, addressing questions and clarifying doubts effectively
• Assess student progress through assignments, quizzes, and other evaluation methods
• Communicating expectations and providing feedback to students on their progress
• Provide trainees with industry relevant application information
• Maintain a conducive learning environment for all students and support the educational needs of students

Requirements:

• Bachelors / Masters / PhD Candidates in Civil Engineering, or related field
• Good understanding of engineering materials, material mechanics, and soil mechanics concepts and applications
• Familiarity with relevant civil engineering software, tools, and resources
• Working experience in the civil engineering field
• Effective communication and interpersonal skills in English
• Any previous teaching experience will be an added advantage
• Fresh Graduates are welcomed to apply

Working Hours:

• At least 3 hours per week (when classes are scheduled)
• Weekday evenings (19:00 – 22:00) or weekends

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Calculated BOQ and invited subcontractor for cost estimation.
• Sourced Quotations and Specifications from suppliers and contractors.
• Collected BQ and arranged cost comparison.
• Attended internal, external meeting.
• Performed site inspection to ensure that work is carried out based on specification and drawing.
• Prepared report and method statement whenever necessary.
• Supervised daily site installation.
• Day to Day management of the site, including supervised and monitored the site labour force.
• Inspected Handover inspection with consultant engineer and client.
• Follow up with clients and handover the project
• Good knowledge civil, Structure and M&E deoartment

Responsibilities:

1. Checked technical specifications, M&E drawings and documents.
2. Coordination of drawings with clients, main contractors and updating of drawings base on meetings and discussion.
3. Produced M&E Services design drawing including electrical system and ELV system, Fire Protection system, Plumbing and waste, etc.
4. Performed draft detailed for M&E shop drawings, as built drawings and standard detail and SLD drawing, Layout, Schematic based on preliminary concepts, sketches, calculation, specification sheets and other data.
5. Provided technical support and assistances to project manager and engineers at every project stages.

PM Group is an international project delivery company operating across Europe, the USA and Asia. We have a 43 year track record in project management, process design, facility design and construction management for leading multinational companies. We are now recruiting for Project, Process and Mechanical Engineer Intern in Singapore.

Job Summary

Project Engineer (intern)

• Support and assist the Project Managers in their duties and to carry out cost research and general department duties
• Develop and maintain collaborative relationships with our clients
• Have the opportunity to communicate with both internal and external stakeholders
• Learn on establishing project objectives in line with our clients and ensure goals and timelines are archieved
• Support in executing of projects via the PM Group Quality and Management systems
• Assist in projects technical and commercial delivery
• Train and learn to develop and implement appropriate project execution strategy(s) and maintain project budget
• Ensure compliance with local statutory and regulatory obligations

Process Engineer (Intern)

As a Chemical Engineering professional at PM Group, you will work as part of a multi-disciplined team on projects in the following sectors – Mission Critical, Pharma, Med Tech, Advanced Manufacturing, Food and Energy. Your work assignments will involve rotation through different projects, covering areas such as:

• Process Safety
• Process Plant Operation
• Process Optimization/Modelling
• Process Unit Operations
• Design Calculations
• Project Management

Mechanical Engineer (Intern)

• Prepare HVAC and Building Services basis of design documents
• Involve in equipment and personnel heat loads and generation of HVAC heat load calculations
• Coordinate with team members on preparing equipment list, schedules, datasheets and specifications for HVAC and Building Service equipment
• Learn & understand sub-contractor scopes of work for HVAC and Building Services

Office location: International Business Park (Jurong East)

Work arrangement: Hybrid - Work-From-Home & in office

Period: Jan to Mar/Apr 2025

1. Able to read and understand technical drawings.
2. Must able to do Mitutoyo CMM Programming and Operation.
3. Ensure incoming materials, in-process production and finished products meet by confirm specifications requirements; conducting visual and measurement tests.
4. Follow up corrective actions in production
5. Documents inspection results by completing reports and logs; inputting data into quality database.
6. Able to perform final inspection report for finished products and prepare relevant documents to customer.
7. Evaluate and analyze customers rejections, implement and feedback corrective action.

• At least 5 years' experience in Quality Control
• Basic Computer knowledge to prepare Quality Documents Report
• Able to speak, write and read simple English
• Able to work independently with minimum supervision

Nanyang Environment and Water Research Institute, NTU is looking for a Research Fellow with expertise in chemical reactors to develop an improved prototype for a thermocatalytic process.

The project is funded by National Environment Agency, Singapore to address one of the largest problems in waste management – the problem of plastic waste pollution. A significant fraction of plastic waste has substandard quality for mechanical and chemical recycling even after sorting and cleaning. The Research Fellow will work on the design, fabrication and testing of a chemical reactor system that will use pyrolysis-chemical vapor deposition (CVD) technology for converting these plastic waste streams (specifically, contaminated and rejected plastics) into multi-walled carbon nanotubes (MWCNTs) and hydrogen. The role of Research Fellow is to design a system prototype that can effectively mitigate the impact of impurities from diverse plastic waste streams on production outputs and can be operated in a continuous mode.

Key Responsibilities:

The candidate will be undertaking full research work and administrative duties during the term of employment within the following areas:

• Experimental work on plastic waste conversion into carbon nanotubes and hydrogen.
• Design, procurement, installation and operation of the prototype system;
• Investigation of system performance and determining factors that influence the yield and quality of outputs;
• Development of improvements in system design to mitigate the factors decreasing quality and yield of outputs;
• Development of a continuous process;
• Liaising with vendors regarding the feasibility of scale up and conducting a cost-benefit analysis.
• Publishing research papers and documenting developed intellectual property.
• Reporting the progress to stakeholders (internal and external).

Job Requirements:

• Ph.D. degree in a field relevant to chemical reactor engineering (e.g., Chemical Engineering, Thermal Engineering, Mechanical Engineering, Process Engineering or other).
• PhD thesis or postdoctoral experience related to chemical reactor engineering for at least one of the following areas: (a) catalytic reactors, (b) continuous reactors.
• First-author publications in the areas mentioned above.
• High proficiency in English (e.g., TOELF, IELTS, GRE) for preparation of research papers.
• Ability to prepare well-written technical reports and research papers.
• Ability to prepare decent quality presentation decks, figures and illustrations.
• Ability to build formal and informal partnerships and work collaboratively with others to meet shared objectives.
• Ability to consistently achieve results, even under challenging circumstances.

We regret to inform that only shortlisted candidates will be notified.

• Successful candidate will be helping the manager in engineering data entry, follow up on customers queries, general office administration work etc.
• Candidate should possess ITE certificate and above, preferably in engineering related field
• Proactive team player with the ability to work independently at times. Possesses initiative and good communication skills
• Proficient in basic computer skills, Microsoft Word, Excel
• At least 3 Year(s) of working experience in an office environment is preferred.
• Fresh graduates, mid-career switching, retirees/stay at home moms wanting to return to the work force are welcome to apply

Salary: $2400-$2800+allowances+OT=>$3300

Industry: Engineering

Located at Tuas

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Salary: $2400-$2800+allowances+OT=>$3300-$4000++

Industry: Engineering

Located at Tuas

Japanese MNC

Have AWS + Bonus + Yearly increment

Mon to Fri 3 rotating shift

Job Description

• Operate and monitor machinery on the assembly line to ensure smooth operation
• Conduct routine maintenance tasks on machinery as needed
• Identify and address any issues with machine operation
• Utilise mechanical and electrical knowledge to troubleshoot and repair production machines
• Conduct regular inspections to identify potential malfunctions and perform preventive maintenance

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

First 3 months probation $2600, after confirmation $2700-$2800 depends performance

Industry: Engineering

Located at Tuas

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scopes & Responsibilities

• Support NPI and Site projects as Engineering Technical Lead or Subject matter experts for process equipment
• Provide technical expertise in site selection assessment to identify equipment/facility gaps, select new equipment, assess layout/utilities capacity and partner project managers to develop project cost and schedule
• Perform assessment for equipment during new product introduction, change controls and other qualifications activities to ensure equipment are in its validated state
• Subject matter expert for process equipment performance and operation to ensure safety, compliance and sustained operation
• Lead and participate in technical transfer activities and cross-functional meetings
• Work independently and/or with project managers to complete engineering projects of various scales within schedule, budget and quality constraints
• Effectively manage and work with project CQV team to ensure timely delivery of projects
• Responsible for commissioning and qualification activities including FAT, SAT, PSSR, automation checkouts, IQ, OQ, PQ, and asset/preventive maintenance/spare parts creation for new process equipment
• Participate in the system walk-down, ensure the closure of punch items and support the takeover of the system from the project team
• Work closely with project managers to introduce new equipment including development of business case, project charter, user requirement specifications, quality risk assessments, conceptual design, preliminary design, design specifications and detail design
• Participate in design review and setup up of new asset and associated maintenance plan/spares in Maximo
• Work with research, manufacturing, process development, utilities, facilities, quality assurance and validation departments in developing requirements and recommendations for large and/or highly complex system/facility modifications
• Responsible for investigation of deviations, development of corrective and preventive actions and implementation of change controls in a timely manner
• Develop, implement and optimize maintenance and reliability activities such as preventive maintenance, job plan and datasheet development in Maximo
• Benchmark equipment performance (e.g., reliability, productivity) and determine improvement plans
• Periodically review and/or improve equipment safety, maintenance strategy, spare parts, and other continuous improvement opportunities to enhance reliability
• Responsible for management and oversight of team of CQV engineers
• Develop the best team by coaching and mentoring engineers to develop their technical competency and leadership skills

Qualifications

• Doctorate degree in Engineering OR
• Master’s degree in Engineering and 4 years of directly related experience in a pharmaceutical manufacturing site OR
• Bachelor’s degree in Engineering and 8 years of directly related experience in a pharmaceutical manufacturing site
• Able to work independently with minimal of no supervision
• Experience in managing various stakeholders expectations related to process equipment in biopharmaceutical
• Good communications skills, both oral and written, including presentation skills
• Good interpersonal and facilitation skills necessary to forge consensus among competing client interests while ensuring objectives are met
• Strong analytical skills and knowledge of industry trends to identify potential improvement opportunities. Ability to combine technical problem-solving skills with business acumen to determine best business solution
• Working knowledge of biopharmaceutical processes such as chromatography, buffer / media tanks, viral filtration, tangential flow filtration is preferred. Process knowledge on inoculation, bioreactors, harvest, single use technologies and critical utilities will also be considered
• Experience in validation processes such as generation/execution of Installation/Operation/Performance qualification documentation
• Knowledge in Automation systems and processes such as RD’s, Delta-V, BMS, ladder logic and PLC
• Demonstrated project management skills (schedule/cost development, facilitation, collaboration, basic project management, completion and follow-up) and application of concepts
• Problem solving skills requiring the application of scientific and engineering theory and calculations and creative skills in the development of hypotheses and approach
• Flexibility to work off-hours
• Knowledge of Total Productive Maintenance, Reliability Centered Maintenance concepts is an added advantage

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional, and related sectors.

With offices across Europe, Asia, and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for Recruitment/Sales Intern- Engineering Services-Pharma to join us on an Internship to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Build your network by engaging with candidates as a talent acqusition/recrtuiter
• Build and strengthen your network of candidates via cold calling, and face to face meetings
• Continually seek opportunities to increase customer satisfaction, driving continuous improvement initiatives.
• Build a network of clients to sell out outsourced technical solutions.
• Must be in the last semester of your studies as a full time job could be available for the right talent.

If you'd like to find out about this opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal-opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing on employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

About the Role

Zero-Error Systems (ZES) is seeking versatile, detail-oriented Field Application Engineering - Manager. In this role, you will work closely with the sales and engineering team to identify customer needs, develop technical solutions, and ensure the successful implementation and optimization of ZES’ products. Working in a dynamic, fast-paced, development environment, you will also play a crucial role in providing technical support and expertise to customers. This position requires a blend of technical knowledge, customer interaction, and problem-solving skills.

Key Responsibilities

1) Customer Support and Relationship Management

• Serve as the primary technical contact for customers, addressing their queries and providing technical support.
• Build and maintain strong relationships with customers to understand their requirements and provide tailored solutions.
• Provide effective FAE support to customers for ZES products, through alignment with internal sales teams and engineering team.

2) Pre-Sales Support:

• Collaborate with the sales team to understand customer needs and develop technical proposals.
• Assist in the preparation and delivery of product demonstrations and technical presentations to potential customers.
• Provide technical input for the development of sales strategies and proposals.

3) Technical Expertise and Solution Development:

• Stay up-to-date with industry trends, emerging technologies, and competitive products.
• Develop and customize technical solutions to meet specific customer requirements.
• Partner closely with the engineering team to provide customer feedback and influence product improvements.

4) Post-Sales Support:

• Ensure successful product implementation and integration at customer sites.
• Provide ongoing technical support and troubleshooting to resolve customer issues.

5) Documentation and Reporting:

• Prepare and maintain detailed technical documentation, including application notes, user guides, and technical reports.
• Maintain accurate records of customer interactions, issues, and solutions.
• Provide regular updates and reports to management on customer activities and support issues.

6) Any other duties assigned

Key Requirements

• Bachelor’s in Electrical Engineering or related field.
• Strong understanding of the semiconductor industry, market dynamics, and competitive landscape in the region.
• Proven experience in a field application engineering or similar technical support role, for Semiconductor components, including Power management IC, MCU/FPGA is preferred.
• Excellent problem-solving and analytical skills.
• Strong interpersonal and communication skills.
• Able to work independently as well as a good team player
• Detail-oriented, with a strategic outlook and a focus on driving results.
• Willingness to travel to customer sites and industry events as required.

The Singapore Centre for 3D Printing (SC3DP) offers a full range of additive manufacturing services, from design and infrastructure to production and validation. With advanced technologies such as topology optimization, generative design, and bioinspired design, SC3DP creates optimized products using a variety of novel materials and printing processes, including hybrid printing, post-processing, and emerging technologies. Sustainability is a top priority for SC3DP, which offers material development and control services that combine artificial intelligence, big data, and other digital tools for process optimization, as well as non-destructive testing for AM parts. Backed by a team of experts and a state-of-the-art facility equipped with the latest equipment and technologies, SC3DP is committed to leading the way in sustainable additive manufacturing research and development.

We are looking for a Research Associate to develop novel 3D printing technologies in the area of large-scale 3D cementitious structural printing.

Key Responsibilities:

Structural Printing

• Large-scale structural modules with Robotic arm and Gantry system.
• Programing code for Robotic arm and Gantry system
• Operating the printing system including mixer, pump, robotic arm, and Gantry system

Printing Path Optimisation

• Computational design of 3D concrete printing structure
• Optimise the printing path to ensure the smooth structure surface finish and excellent mechanical properties.
• Conduct structural testing, such as tensile, compression, flexural and shear tests
• To investigate the key parameters in the design of 3D printing concrete specimens on the structural performance.
• Conduct numerical analysis using finite element modelling of structural elements by using FEM
• Data acquisition and Image processing with MATLAB

Experimental Investigation

• Design and fabrication of experimental facilities including nozzles and inline control systems based on the theoretical model and CFD simulation.

Job Requirements:

• Master degree in 3D cementitious material printing, additive manufacturing or Civil Engineering, with a specialization in Structural Engineering
• At least 2 years of research experience in 3D concrete printing (3DCP) with strong knowledge on 3DCP Process and path planning, Design for 3DCP, tool path and machine code generation
• Computational Design and 3D concrete printing
• Possess good knowledge of structural analysis, concrete and steel materials, and finite element analysis
• Strong knowledge and experience in large scale 3D cementitious material printing
• Excellent programing code for robotic arm and gantry system operation.
• Strong experience in parametric modelling software like Rhinoceros 3D, Grasshopper, CAD/CAE tools like MasterCAM, Robotmaster.
• Ability to work on structural and surface optimization
• Excellent interpersonal, problem solving and analytic skills
• Able to work in a multi-disciplinary team

We regret that only shortlisted candidates will be notified.

Established in 2010, the Energy Research Institute @ NTU (ERI@N) is a pan-university research institute that focuses on systems-level research for tropical megacities. For more details, please view https://www.ntu.edu.sg/erian

ERI@N invites applications for the position of Research Fellow.

Key Responsibilities:

• Specific precipitation
• Liquid-liquid or Liquid/solid extraction
• Simulation of scaled up process.
• Design of continuous process based on the most interesting systems for the selective recovery of the metal ions of interest
• Implementation of the process at pilot scale (~10 L/h or larger) to demonstrate its feasibility and to give first hints for cost analysis from the perspective of development at industrial size
• Development, characterization and scale up of innovative hydrometallurgy-based separation processes from e-waste leaching solutions

Job Requirements:

• PhD in chemical engineering / chemistry
• Candidate with strong background on chemical separation processes, especially hydrometallurgy ones.
• Good record of publications and IPs
• Experience with lab set up or prototype development
• Familiar with chemical elements characterization techniques (Spectrophotometry, ICP, FX…)
• Familiar with Labview, python or process simulation software
• Excellent command of oral and written English - for research purposes

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

The Climate Transformation Programme (CTP) aims to develop, inspire and accelerate knowledge-based solutions and educate future leaders to establish the stable climate and environment necessary for resilient, just, and sustainable Southeast Asian societies.

CTP will generate knowledge and innovation across disciplines including climate and Earth science, ecology, materials science, artificial intelligence, humanities, social sciences and the arts, finance, health, and engineering. It will also translate state-of-the-art scientific results into real world solutions for Singapore, and it will transfer these solutions to Southeast Asia (SEA) and beyond.

As part of this programme, Research Cluster 4: Novel engineering solutions for climate impacts, will explore engineering solutions to adapt to sea-level rise and climate-constrained water resources. The CTP research programme is summarised here: https://earthobservatory.sg/research/climate/climate-transformation-programme>.

The Project Officer will be based in School of Civil and Environmental Engineering (CEE) and will be expected to work effectively for advancing the engineering solutions to mitigate the climate change impact which focus on new design concepts for seawalls and coastal defence systems. The position is expected to perform independent and collaborative research to meet the project objectives, to assist the management work of the project daily operation to facilitate the success of the project.

Key Responsibilities:

• Conduct research on laboratory experiments to test the performance of flexible seawall in flume test.
• Keep track of the latest related research developments
• Writing project progress reports
• Assist in the daily project operation management

Job Requirements:

• Bachelor in civil engineering, Coastal Engineering or related discipline
• Expertise in laboratory soil mechanics testing
• Knowledge in ground improvement, coastal erosion and management, hydrodynamics
• Publication track record is an advantage
• Proficiency in oral and written English - essential for data analysis and communication with stakeholders

Interested applicants are invited to submit a cover letter and full CV in one document. Enquiries about this position can be made to Dr. Wu Shifan ([email protected]).

We regret that only shortlisted candidates will be notified.

Salary: $2600 for first 3 months. After confirmation is $2700

Industry: Engineering

Located at Tuas

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

NTU Singapore is in one of the world's most rapidly growing countries. As a beautiful and vibrant nation in Southeast Asia, Singapore attracts top talent from around the globe. NTU Singapore is one of the major universities in Singapore and in the world. It is one of the most creative and innovative universities internationally. NTU Singapore continues to invest in talent, strengthening existing domains and expanding to new and emerging fields. We seek scholars that are committed to pioneering research and have a strong dedication to teaching and mentoring students. The university fosters a dynamic and collaborative community and aspires to address global challenges.

The School of Chemistry, Chemical Engineering and Biotechnology (CCEB) is a unique department at NTU Singapore, advancing cutting-edge education and research in diverse areas of chemistry, chemical engineering, bio(medical)engineering, biotechnology, and other relevant multidisciplinary fields. CCEB invites applications for the area of Sustainability Engineering at the Assistant Professor level. Possible areas include but are not limited to data driven energy system modelling, carbon economics, logistics and supply chain management, and/or techno-economic analysis and life cycle assessment, particularly in the context of sustainability and circularity.

We are open to expanding these areas as well as entering new fields. Applicants should hold a Ph.D in a related science or engineering field by the beginning of employment and should have demonstrated experience in the related research. Preference will be given to individuals with foundational training in chemical engineering or closely related disciplines. Under special circumstances, an untenured associate or senior faculty appointment is possible, commensurate with experience. Faculty duties include teaching undergraduate and graduate courses in the related subjects and developing course materials, conducting original scholarly research, as well as advising, supervising, training, and mentoring students and junior researchers. We offer excellent and competitive start-up packages and salaries.

We seek imaginative scholars who want to make a big impact through teaching and mentoring students and conducting groundbreaking research. Candidate applications should include (1) A cover letter and detailed CV, (2) Statement of professional interests and goals in research (up to 5 pages including figures but excluding references), (3) Statement of aspiration in teaching (up to 2 pages), (4) Three selected publications, and (5) Addresses of three or more references who will provide recommendation letters, through the NTU career portal.

CCEB seeks a diverse and inclusive workforce and are committed to equality of opportunity. Applicants, irrespective of race, color, sex, sexual orientation, gender identity, pregnancy, religion, disability, age, genetic information, veteran status, ancestry, or national or ethnic origin, are encouraged to apply.

All applications and enquiries should be addressed to: Prof Xu Rong ([email protected]), Search Committee Chair for Sustainability Engineering.

The closing date for applications is 31 December 2024. Only shortlisted candidates will be notified.

Please click here to apply.

The School of Civil and Environmental Engineering (CEE) is a leading school for Sustainable Built Environment. The key objective is to support efforts to excellence in providing advanced education, spearheading groundbreaking research, and delivering unparalleled professional services.

We are looking for a Research Associate to enhance the blast resistance of precast structures and analyze progressive collapse in flat slab systems. The role will focus on creating safer and resilient environments, addressing critical challenges, such as structural safety and resilience, and contributing meaningfully to our overarching commitment to protect communities and foster innovation in construction safety.

Key Responsibilities:

• Conduct research and perform in-depth analyses to improve blast resistance in precast structures and assess the risk of progressive collapse in flat slab systems.
• Develop and implement innovative methods and solutions to enhance building safety and structural resilience.
• Collaborate with interdisciplinary teams to design, test, and optimize new materials and construction techniques.
• Provide expert guidance on blast mitigation strategies and progressive collapse prevention in project planning.
• Ensure project compliance with safety standards while contributing to the university’s mission of fostering innovation and protecting community welfare.

Job Requirements:

• Master’s degree in Civil/Structural Engineering or related field
• Knowledge of blast effects on structures and progressive collapse analysis
• Familiarity with blast resistance safety standards
• Good written and oral communication skills
• Experience with precast concrete structure design and analysis
• Proficiency in structural analysis software and CAD.
• Competent in analytical, problem-solving, and communication skills

We regret to inform that only shortlisted candidates will be notified

Job Responsibilities and Duties:

• Helps manufacturing staff achieve company goals by communicating expectations, planning, monitoring, and evaluating job results
• Enforces company policies and guidelines
• Trains employees
• Implements cost-saving strategies and techniques
• Ensures that production plans are completed by a certain time
• Evaluates the condition of production equipment
• Maintains a clean and safe environment for all workers

Skills and Qualifications

• Previous supervisory experience
• Excellent coaching and communication skills
• Broad knowledge of production planning processes
• Strategic planning skills
• Comfortable working in a chemical manufacturing environment
• Understanding of machine controls and instrumentation