Job description:

• To ensure effective communications with suppliers and freight handling partners in order for shipping documents and instructions to be issued in a timely and accurate manner to ensure on-time deliveries.
• Establish communication with suppliers to enable timely, accurate delivery schedule of supplier.
• To assist the Procurement Manager in liaising with supplier and forwarders on logistics and shipping matters.
• Preparation of expediting reports detailing supplier's progress and arranging transportation and logistics for clearance of consignments (import and export)
• Procurement of project and non-project items at various vendors to meet the Company's Yard requirements.
• Monitor performance and provide feedback of suppliers, transportation and logistics providers by ensuring resolution of issues and timely deliveries.
• Ensure close monitoring of commited delivery date of suppliers.
• Monitor and ensure that all custom permit declaration complies with the regulatory requirements.
• Inform overseas suppliers to provide import CIPL with seaway Bill or Surrendered B/L to DM person-in-charge to check and verification purpose.
• Review and verify overseas supplier import CIPL with seaway Bill or Surrendered B/L and MES Import.
• To liaise with carrier agent to request Notice of Arrival in advance before vessel arrives in Singapore.
• In charge of preparing logistics tarrif rates.
• Collate and submit monthly MES report to Finance
• Assist in the Annual Vendors Assessmetn exercise
• Preparation of documetns for audit purpose.
• Other procurement functions as assigned by Reporting Officer.

Job Requirements:

• Diploma/Degree in Purchasing Management/Supply Chain Logistics Management/Engineering or equivalent
• Minimum 5 years’ experience in Marine or Oil & Gas industry or machinery procurement experience
• Able to work independently, meticulous and analytical with excellent problem-solving skills

Job Responsibilities:

• Planning, scheduling and monitoring of QS’s work for respective projects to ensure that works are completed on time for submissions to Client parallel to Project Schedule both in re-measurements and change proposals.
• Provide quotations to Client’s for any new additional works arises out of the original scope of works (if any).
• Checking and approving the change proposal for submission to Clients.
• Prepare forecast of overall projects costs inclusive of revised MTO’s and change proposals of each project. (Will provide to Client periodically.)
• Meeting up with Clients to reconcile and close up on the re-measurements and change proposals submitted.
• Compilation and close-up of final account for each project completed with the respective client.
• Prepare and monitor of invoices and payments from Client for each project.
• Provide contractual advice to the PM or Project Team for any commercial issues.

Job Requirements:

• Diploma/Bachelor’s Degree in Civil Engineering, Quantity Surveyor or any Technical Discipline
• At least 10 years of experience in Marine shipyard for large constructions projects
• Experienced in the quantification and valuation of works for claims is essential, together with sound knowledge of commercial processes such as contracts, subcontracting, tendering and procurement
• Excellent written and good communicative skills.

We are looking for a Customer Success Manager who is responsible for monitoring and managing the delivery of Managed Security Services. You shall establish and sustain close engagement with key stakeholders and follow through any issues and service improvement opportunities highlighted at service review meetings with internal cross functional teams.

Responsibilities:

• Build and maintain a trusted advisor status, in partnership with the SOC and other cross functional teams providing the Managed Security Services.
• Contribute to regular service improvement reviews with internal teams and recommend service improvement plans.
• Work with Project Managers when required and assist the customer in facilitating the co-ordination of any work required (upgrades, replacements and fixes).
• Act as a point of contact for service escalations by the clients.
• Act as the interface for escalations between the Client and SOC and other cross functional teams through to resolution and attend any escalation meetings, if required.
• Ensure that appropriate Managed Security Services personnel are available to support the agreed action plan for the duration of the escalation.
• Documenting, supporting and improving operational processes related to the SOC Client Service Management and Service Delivery.
• Interpretation of security incidents to actionable items and make recommendations to customers.

Requirements:

• Minimum 2 years of experience in customer success roles or experience in a cybersecurity operation center.
• Relevant Cybersecurity Certifications such as CISM, CISSP, GCIH, GNFA, CCSK, CRIST will be an added advantage.
• Familiar with Kill Chain methodology, MITRE Attack, NIST Cybersecurity Framework, ISO 27001 etc.
• Excellent team and relationship building skills.
• Strong presentation and communication skills.
• Experience in handing customer queries tactfully, ensure customer satisfaction, retentions and engagement.

Work location: Ang Mo Kio

Job Description

Leads planning and forecasting activities with business partners to achieve investment and accounting goals.

• Collecting, interpreting and reviewing financial information
• Predicting future financial trends
• Reporting to management and stakeholders, and providing advice how the company and future business decisions might be impacted
• Producing financial reports related to budgets, account payables, account receivables, expenses etc.
• Developing long-term business plans based on these reports
• Reviewing, monitoring and managing budgets
• Developing strategies that work to minimise financial risk
• Analysing market trends and competitors

Job requirements

A degree/ Master degree in the following fields will prove particularly advantageous:

• Accountancy or Finance
• Economics
• Mathematics
• Business Studies
• Management

Job Description: WSH Training Facilitator

Key Responsibilities:

• Deliver training sessions and assessments according to the lesson plan and training curriculum.
• Monitor and evaluate the effectiveness of training programs, providing constructive feedback and recommendations for continuous improvement.
• Manage training-related administrative tasks, including maintaining records, preparing reports, and coordinating with relevant stakeholders.

Requirements:

• WSQ Advanced Certificate in Training and Assessment (ACTA) or Advanced Certificate in Learning and Performance (ACLP).
• Advanced Certificate in Workplace Safety and Health.
• Minimum of 5 years of experience in relevant industries.

Job description

Prepare quotation, issue delivery order and Invoice, GST Submission.

· Good knowledge in construction sectors Labour Law & Regulation, WP Apply and renew.

· Full Payrol, Familiar with MOM portal and HR various e-services , Strong administrative skills, able to work independently, multi-tasks.

· Preparation of HR reports to management, Lead, organise, maintain, and develop HR policies.

· Handle company worker’s accommodation such as dormitory rental contract, check in & out and all related matters.

· Assist in purchasing, insurance, invoice verification, letter preparation.

· Government license application and renewal, ISO certification.

. Prepare monthly sales reports followup payment with clients.

· Ad-hoc duties assigned by Manager.

Responsibilities :

· Handle emails and record on Data entry accordingly

· Support the sales team on day-to-day administration and quotation preparation

· Liaise with employees of other departments to resolve issues

· Handle and coordinate incoming items & help to sort them out & do labels to the requestor

· Maintenance of database. Documentation, filing work

· Provide basic administrative support to the other department

· Other ad hoc duties as required.

Good knowledge of construction MOM guidelines and Employment Laws.

Familiar with MOM portal and HR various e-services.

-Monitor, coordinate and keep track of site progress with internals and externals to ensure all work is carried out according to specifications and schedule

-Ensure compliance with WSH Regulations

-Able to read construction drawings, skilled in reinforcement concreting works, tiling, plastering, and other related finishing work on site

-Supervise the related construction activities at the site

Job Requirements:

-Candidates must possess at least a Primary/Secondary/”O” Level, Higher Secondary/College, Professional Certificate/Nitec in any field

-At least 1 years of working experience in a related field

Responsibilities:

• Responsible for carrying out the design tasks and supporting the design activities
• To prepare the Technical Specifications
• To prepare of General Arrangement Plan (GAP)
• Development of new designs and design concepts
• To be involved in technical discussion with Owner(s), Classification bodies and suppliers, where required
• To perform on site checking, discussion, where necessary to resolve issues at site with Production, Ship Repair Managers, Consultants, Classification Society Surveyors, Owners etc., where necessary
• To define the material and equipment, and to determine the required scope of supply (material, standards and documentation) for PR
• To prepare drawings (2D & 3D) and documents as per the contractual technical specification and Classification/Statutory Authorities Rules and Regulations
• Conduct Design Reviews and Integration Reviews to finalise layout arrangement, installation and interface requirements
• To perform engineering calculation, design and computer simulation analysis
• To ensure equipment specification, technical information, functional description document and installation control document and interface design specification are properly maintained, disseminate and use for the preparation of design work activities
• To update Department Head on work progress/status and shortcomings on technical issues on projects under his charge
• To ensure the quality control in the design / drawing process
• To ensure safekeeping of restricted documents and drawings
• To participate in harbour sea acceptance trials, where necessary
• To keep abreast with current technological developments and products, Classification rules, military and industrial standards and other standards relevant to design activities

Requirements:

• Degree in Electrical / Electronics Engineering
• Relevant experience in Marine or Integration work will be advantageous
• Able to use or learn software such as AutoCAD to produce drawings (2D & 3D)
• Keen interest in project management and coordination work
• Able to communicate with both internal and external stakeholders
• Only Singaporeans need apply

Additional Information:

Location: 16 Benoi Road (Island-wide transport provided)

5 days work week

Working Hours: 7.25am to 5.00pm

The applicant is responsible for managing projects at construction sites related to Solar Panel Installations, Electrical Installations, Mechanical & Engineering Works as stipulated by clients at construction sites. He should also manage the Team of Workers under his charge and attend to meetings with main contractors to discuss on projects and safety aspects. Preferable that the candidate has knowledge about Tender Quotations relating to construction projects.

KEY RESPONSIBILITIES

• Coordination with main contractors
• Able to read drawings and order materials
• Have Safety Supervisor pass
• Ensure the personnel under him are deployed accordingly
• Supervise the workers and manage their work records
• Ad hoc duties when assigned

Requirements:

1. Min Diploma/Degree in Mechanical Engineering
2. Safety Supervisor
3. Class 3/ 4 Driving Licence
4. Diploma in CADD
5. Minimum 3-5 years of Mechanical Engineering Experience in Construction Related Field

• Interprets specifications, drawings, plans and checks all steelwork shop drawings done by the structural detailer if in accordance to client’s construction drawing prior to submission

• Organises and directs the delivery of construction materials and establishing detailed programs and schedule of site activities

• Checks the construction drawings if feasible for erection on site and work closely with the structural detailer for any proposal if needed

• Records and monitors design changes and assess their cost impact for the project’s contract sum and coordinate with the Contract Department

• Liaises with the client’s Technical Manager for all engineering and technical matters focusing structural discipline

• Responsible for coordinating with the Project Site Engineer for any site related technical issues

• Monitors the fabrication progress and coordinate closely to Production Department to meet the required schedule and report it to the client

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering(Civil) or equivalen.
• At least 2 years(s) of working experience in the related field is required for this position.
• Required Skill(s): Understand drawing, Quantity take off, Prepare BQ, Familiar with costing, Supplier sourcing, Contract administration.
• Preferably Senior Executive specialized in Engineering-Civil/Construction/Structural or equivalent.
• Familar with structural steelworks.
• Other QS duties as assigned from time to time.

Structural Steel Engineer Detailer is responsible for drawing preparation, submission and detailed drawings for steel fabricators and steel erectors, prepares detailed plans, drawings and other documents for the manufacture and erection of steel members used in the construction and monitoring the progresss of fabrication of projects and ensure compliance with construction safety regulations and quality standards, to check the factory workers in safety postition,safety distance,make sure workers are in safe place for producing the work progress

Roles & Responsibilities

Driver - Responsibilities

The work scope for the above job title is as but not limited to the following:

1 The main task of the Driver is to drive the Company lorry to pick up workers, to or from site, office and dormitory etc.

1.1 The Driver must drive the vehicles to the required work sites punctually.

1.2 The Driver must follow the schedule or ad-hoc obtained from the Supervisors and Co-ordinator. The Driver must inform the parties involved if there are any clashes in schedule before proceeding.

1.3 The Driver must inform the Supervisors and Co-ordinator as soon as possible if he is delayed in his schedule. This will enable them to plan their resources efficiently.

1.4 Aside from driving the workers to site, rest of the time will be to support office courier needs.

2 Usage of Company vehicles

2.1 The Driver is to switch off the ignition completely and remove the key when the vehicle is parked and not in use. The Driver must not leave the vehicle in idle mode while waiting.

2.2 The Driver must understand that the Company’s vehicles and attached cash cards are solely to be for Company use. Otherwise, costs will not be reimbursed.

3 Safety

3.1 The Driver must drive and operate the vehicles in a safe manner in accordance to local laws.

3.2 If there are loads on the vehicles, the Driver must ensure the loads are properly secured in accordance with local laws and regulations.

3.3 The Driver must inform the Director or PIC immediately that he is involved in an accident while driving or operating the vehicle. This includes causing damage to third party property.

3.4 The Driver should understand that if the accident is caused by the Driver’s negligence, the Company is entitled to pursue part or all of the claims from him.

3.5 The Driver should also understand if he incurs any traffic offences due to his own negligence, the Company is entitled to pursue part or all of the claims from him.

4 Servicing and Maintenance

4.1 The Driver is to inform the Company if any of the vehicles are unsafe to operate and require repairs. The Driver must not operate the vehicles in such situation.

4.2 The Driver will drive the vehicle to the Company appointed workshop for servicing and maintenance. The Driver will also pick up the vehicle when servicing and maintenance is completed.

4.3 The Driver will drive the vehicles to Inspection Centres as required.

The above is an overview of the work scope and responsibilities of a Driver employed by the Company. It is by no means an exhaustive list. There may be other scope and responsibilities deemed normal by the industry which by default will be included in this Appendix.

Schedule:

Day shift: 5.5 days per week

Requirement:

1. Minimum Class 3 Singapore Driver's license

2. Familiar with the marine industry procedures

3. Good driving track record

4. Familiarity with Singapore roads and ERP time

5. This job may require some late work. OT allowance will be given.

6. Fit and in good health

Job Responsibilities:

· Assist in recruitment, on-boarding, performance management, implementation of HR policies and procedures, staff training & development

· Provide administrative support to the Team

· Timesheet data entry

· Administration on employee insurance, government paid claims, staff benefit claims, and others

· Any other ad hoc duties as assigned by superior

Job Requirements:

· Preferably 1 year of experience

· Fast learner and meticulous

· Proficient in Microsoft Office (Word / Excel)

· Self-motivated, shows initiative, commitment, and teamwork

· Able to start work on short notice

· Ability to be organized, detail-oriented, multitask, prioritize, anticipate needs and meet deadlines as needed.

· 5-day week.

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

*Understand of Pipe Materials

*Min 5yrs Experience Pipe Fitters or Welding

*Preparation of Pipe Fit-up for Welding

*Welder understand TIG/ARC/MIG

*Welding Certificate Must require

*Noted: Above requirements for ONLY Construction Core or Muntiskill Workers can Apply*

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities :

• Creating and updating detailed technical drawings and plans for various aspects of the facility.
• Maintaining accurate versions and revisions of drawings for traceability and project documentation. This could include: Architectural drawings: Floor plans, elevations, and sections of buildings and facilities within the site, including cleanrooms, laboratories, manufacturing areas, and utility spaces.
  Mechanical drawings
  Electrical drawings
  Process equipment layouts
  Utility systems
• Compliance with regulations: Ensuring that all drawings and plans comply with regulatory requirements and industry standards for bio pharmaceutical manufacturing facilities, including Good Manufacturing Practices (GMP) and other relevant guidelines.
• Overall, translating conceptual designs and technical requirements into detailed drawings that guide the construction, installation, and operation of a bio pharmaceutical manufacturing site.
• Creating detailed technical drawings and plans using computer-aided design (CAD) software.
• Interpreting and translating rough sketches, specifications, and requirements into accurate and precise drawings.
• Collaborating with engineers to understand project requirements and objectives.

Job Description & Requirements

Job Description & Requirements

Crane Operator Responsibilities:

• Operating the crane under supervision.

• Conducting machine safety checks each day

• Performing routine maintenance.

• Understanding and executing the job billing process.

• Wearing PPT safety equipment.

• Cleaning and maintaining the crane hoisting mechanism.

• Setting up the manufacturer’s operator manual.

Crane Operator’s Requirements:

• Qualified crane operator with BCA and MOM recognised.

• Minimum of 5 years industry experience.

• Knowledge of Sany Crane

• Daily and monthly equipment inspections.

• 6 days a week.

Responsibilities

· Support various assigned Mechanical packages in relation to the Project

· Assist in data sheets, specs submissions, to ensure that they are in accordance with the technical requirements and contracted guidelines

· These include rotating and static equipment packages

· Aid to liaise and interfaces with stakeholders for technical and commercial clarifications

Requirements

· Mechanical Engineering or equivalent

· With demonstrated experience in mechanical packages or mechanical engineering knowledge, in marine, offshore, or related industry projects

As a part of our team of more than 5000 pioneers, you will play a key role in developing solutions for some of the most crucial scientific challenges of our age. Within less than a year, we were able to develop our COVID-19 mRNA vaccine following the highest scientific and ethical standards – writing medical history.

We aim to reduce the suffering of people with life-changing therapies by harnessing the potential of the immune system to develop novel therapies against cancer and infectious diseases. While doing so, we are guided by our three company values: united, innovative, passionate. Get in touch with us if you are looking to be a part of creating hope for a healthy future in many people's lives.

Responsibilities:

• Creating and updating detailed technical drawings and plans for various aspects of the facility.
• Maintaining accurate versions and revisions of drawings for traceability and project documentation. This could include: Architectural drawings: Floor plans, elevations, and sections of buildings and facilities within the site, including cleanrooms, laboratories, manufacturing areas, and utility spaces.
• Compliance with regulations: Ensuring that all drawings and plans comply with regulatory requirements and industry standards for bio pharmaceutical manufacturing facilities, including Good Manufacturing Practices (GMP) and other relevant guidelines.
• Overall, translating conceptual designs and technical requirements into detailed drawings that guide the construction, installation, and operation of a bio pharmaceutical manufacturing site.
• Creating detailed technical drawings and plans using computer-aided design (CAD) software.
• Interpreting and translating rough sketches, specifications, and requirements into accurate and precise drawings.
• Collaborating with engineers to understand project requirements and objectives.

Benefits for you:

We offer a competitive compensation package which will be determined by the contract type and selected candidate’s qualifications and experience.

We are looking forward receiving your application.

Job Description & Requirements

Authorities and Responsibilities

1. Weld, setup, assemble parts and producing parts as per drawing specification.
2. Guiding and providing operator with basic instruction in performing the weld process.
3. Repair machinery and other components by welding pieces and filling gaps
4. Test and inspect welded surfaces and structure to discover flaws
5. Maintain equipment in a condition that does not compromise safety

Job Description & Requirements

Job Responsibilities:

· Fixing cranes & excavator / Troubleshooting.

· Monthly crane & excavator servicing.

· Carry out mob demob crane & excavator duty.

· Obtained Class 3 Licence

Requirements:

· Candidates must possess at least an Engineering/Mechanical background.

· Effective verbal & written communication skills, a positive attitude, an open mindset and a team player.

· Process strong organizational and planning abilities and excellent analytical and problem- solving skills.

Performs Coordination supervisory

responsibilities for managing all aspects of

the construction, installation,maintenance,

and repair of electrical power lines,

electricalsystems, fixtures, apparatus, and

appliances.

This individual is responsible for planning,

scheduling, assigning, participating in,and

inspecting the wor k of power

linesmen,electricians, and trades helpers.

The employee also has responsibility for

supervising the operation of an

electricalrepair shop. Wor k includes the

design and construction of special

electrical apparatus and fixtures and the

preparation of specifications and

estimates for construction, repair, and

installation projects. Large scale and

complex j obs are normally inspected upon

completion for conformance with

specifications; smaller j obs are checked

for satisfactory operation by the users of

the

equipment. Wor k is performed under

general direction of an administrative

superior and is

reviewed through discussions and

inspection of completed work.

The School of Civil and Environmental Engineering is seeking a highly self-motivated individual to work as a research associate. The position is in civil engineering and will focus on AI and digital twin for workplace safety and health. The earliest starting date for the position will be Sep 2024.

Key Responsibilities:

• Collect workers’ behaviour and health data.
• Assist both lab and field tests of workplace safety and health.
• Publish several papers in top journals.
• Write proposals for further development.
• Mentor students

Job Requirements:

• A Master’s degree in Civil Engineering, Mechanical Engineering, Electrical Engineering, or a related field.
• Extensive experience in machine learning.
• Excellent skills for data analytics.
• Good oral and written communication skills in English - essential for data analysis and communication with stakeholders
• A good record of referred journal publications or conference presentations is a plus

We regret that only shortlisted candidates will be notified.