Responsibilities:

• Oversee the construction by proving on site management and quality control to ensure project meet deadline
• Control of manpower & resources to execute site works within time & costs
• Solving technical issue on site
• Liaising with government agencies, coordinating with subcontractors, clients, consultants
• Provide regular performance status update to the management

Requirements:

• Degree in Civil Engineering (recognized PE board or Commissioner of Building Control for RE-registration).
• Min 5 years of relevant working experience in civil engineering and road works
• Class 3 driving license
• Able to work Independently
• Familiar with road work construction field
• Attractive Remuneration Package
• Only Singaporean may apply

Please state the following in your resume.

(i) Current and expected salary

(ii) Reason of leaving (Past and present employment)

(iii) Notice period

(iv) Contact details

We regret only short-listed candidate shall be contacted

[What you will be working on]

In addition to your teaching duties, you will carry out industry or consultancy projects to help you remain relevant in your profession and to evolving changes in industry, and maintain strong linkages with industry with industry and schools. You will also have the opportunity to have industry attachments or experience on a regular basis to update your skills, knowledge and practices of your profession.

[What we are looking for]

You should be trained in Rapid Transit Engineering or Engineering-related disciplines, with preferably three years of relevant practical experience in the in Mass Rapid Transit or Train Industry. Good knowledge and technical competency in some of the following key area(s) will be an advantage:

- Signalling, Communications and Integrated Supervisory Control System (ISCS) for Train System.

- Automatic Train Operation / Protection, SCADA, Maintenance Management System (MMS), wide area network technologies (e.g. SDH, Gigabit Ethernet, MPLS), wireless LAN technologies, TETRA digital trunked radio, Telephony, video surveillance systems and Centralised Clock system.

- Permanent Way (PWay) and Rolling Stock (RS) System.

- Infrastructure system (e.g. tunnel, viaduct, third rail, guide rail, sleepers and Route Protection), Mechanical and Electronic equipment relating to train system (such as bogie, under- carriage and car interior design).

Those with good and relevant experience can look forward to Senior Lecturer or equivalent positions, with career development opportunities to leadership positions in the Colleges or Headquarters.

Applicants may check their application status at the end of 8 weeks from the closing date of this job posting.

[What you will be working on]

In addition to your teaching duties, you will carry out industry or consultancy projects to help you remain relevant in your profession and to evolving changes in industry, and maintain strong linkages with industry and schools. You will also have the opportunity to have industry attachments or experience on a regular basis to update your skills, knowledge and practices of your profession.

[What we are looking for]

You should have at least 3 years of relevant experience in big data, data analytics, and with experience in web development.

You should also be motivated to work with youths to develop them in the area of data engineering and data analytics.

You should also possess the following skills:
- Experience working on relational SQL databases
- Ability to write, analyse, and debug SQL queries.
- Experience with Data Warehousing, ETL (Extraction, Transformation & Load)
- Experience in statistical data analysis and data mining packages (Python, R)
- Hands-on experience in Python/R in production environments.
- Experience in TIBCO Spotfire, Alteryx, Power BI or similar tools.
- Experience with machine learning algorithms

Those with good and relevant experience can look forward to Senior Lecturer or equivalent positions, with career development opportunities to leadership positions in the Colleges or Headquarters.

Applicants may check their application status at the end of 8 weeks from the closing date of this job posting.

Responsibilities:

· Assist PM in project planning & execution.

· Handle technical matters such as preparing method statements, construction program, shop drawing, & other submissions related to project.

· Liaises with clients, consultants, contractors and government authorities.

· Other works assigned managers Requirements:

· Degree in Civil Engineering (recognized PE board or Commissioner of Building Control for RE registration).

· Min 2 years of relevant working experience in road works.

· Knowledge in CAD

· Class 3 driving license

· Able to work independently

· Familiar with road work construction field

· Attractive Remuneration Package

Qualified candidates, please send in your updated resume in MS Word format via APPLY NOW

Your resume must include the following information: -

1. Current and expected salary

2. Reasons for leaving

3. Date of availability

* We regret that only shortlisted candidates will be notified

Job Responsibilities

• Monitor, coordinate and keep track of site progress with internals and externals to ensure all work is carried out according to specifications and schedule
• Ensure compliance with WSH Regulations
• Able to read construction drawings, skilled in tilling, plastering and other related finishing works on site
• Supervise the related construction activities at site

Job Requirements

• Candidates must possess at least a Primary/Secondary/”O” Level, Higher Secondary/College, Professional Certificate/Nitec in any field
• At least 8 years of working experience in a related field

Overall Job Objectives

Assists the PM to handle all architectural works as instructed by PM

Core Responsibilities

1. Architectural planning, coordination with consultants, subcontractor and document control such as monitoring of sample submission, approval status of drawings

2. Attend meetings with consultant & subcontractor regularly

3. Supervise architectural works and coordinate with subcontractors and consultants on architectural matters and ensure workmanship standards

4. Provide technical advise to the architectural designers with regard to building regulations

5. Responsible for work in all phases of the architectural process

Job Specifications

1. Min Diploma and above.

2. Good communication, interpersonal and collaboration skills

3. Minimum 2 – 5 years of relevant experience.

Driver responsibilities include arranging regular cleaning and maintenance services for the vehicle, planning each route based on road and traffic conditions and managing payments. ... To be considered for this role, you should have a valid driver’s license and a clean driving record with no traffic violations.

• Report to Construction Manager and lead the team/site works during his absence.
• Prepare & review detailed schedule for the site team to follow accordingly and for on-time completion
• Prepare & review detailed method statements and work instructions.
• Coordinate all related construction matters with subcontractor/consultant/client.
• Prepare & review company reports and documents
• Responsible & resolve technical and claim issues
• Assess subcontractors’ work activities against performance expectation
• Ensure compliance with quality, environment, health & safety requirements.

Job requirements:

• Degree in Civil Engineering or equivalent
• Minimum 6 years of relevant experience, inclusive of at least 3 years as Deputy Construction manager level, managing construction teams for complex vehicular structures and road projects of similar scale and complexity
• Candidate with LTA viaduct experience is preferred
• Well experienced in Bored piling, CBP, ERSS, RCBC Drain Box, Grouting, etc.
• Knowledgeable with various Utilities, M&E works
• Proficient in MS Office and knowledge on AutoCAD is at an advantage
• Attained trade certificate such as CSCPM/BCSS/Confined Space/Work at height
• Good interpersonal skills
• Self-motivated, independent individual and possesses great initiatives
• A team leader
• Location : Woodlands
• Project : Viaduct

[What you will be working on]

You will be responsible for assisting the Lecturers in the conduct of practical lessons, guiding the students in their practical lessons and monitoring the students’ projects. You are also responsible for ensuring that the workshops meet the safety regulation and the training materials like consumables, tools, and equipment in the workshops/labs that you are in charge of are available and in good working condition for training activities. You are expected to carry out  periodic maintenance and servicing of tools, equipment/machines, training vehicles and keep proper history records of the equipment/machines/training vehicles. You are to mange inventory/stocks for the workshops/labs under your charge and involve in procurement.

[What we are looking for]

• Preferably 2 years of work experience

• A team player who is able to multi-task and work independently

Applicants may check their application status at the end of 8 weeks from the closing date of this job posting.

[What you will be working on]

In addition to your teaching duties, you will carry out industry or consultancy projects to help you remain relevant in your profession and to evolving changes in industry, and maintain strong linkages with industry and schools. You will also have the opportunity to have industry attachments or experience on a regular basis to update your skills, knowledge and practices of your profession.

[What we are looking for]

A) Process piping, valves, metering pump

Conduct lesson on prescriptive and predictive maintenance on process piping, valves, metering pump and etc. Take lead on Work Health Safety training courses, material and equipment.

You should be trained in Mechanical Engineering or Mechatronics with at least 3 years of relevant practical experience in the Oil and Gas related sector. Possess relevant certification in Workplace Safety and Health (WSH) will be an advantage. You should also display passion and commitment for an engineering and teaching career.

B) IoT application

Design IoT application with use of sensors (vibration, heat, flowrate and etc) and gateway on engineering equipment to aggregates data for pattern analysis.

You should be trained in Mechanical Engineering or Mechatronics with at least 3 years of related working experience. Experience in IoT applications development and Industry 4.0 deployment will be an advantage. You should also display passion and commitment for an engineering and teaching career.

Those with good and relevant experience can look forward to Senior Lecturer or equivalent positions, with career development opportunities to leadership positions in the Colleges or Headquarters.

Applicants may check their application status at the end of 8 weeks from the closing date of this job posting.

[What you will be working on]

In addition to your teaching duties, you will carry out industry or consultancy projects to help you remain relevant in your profession and to evolving changes in industry, and maintain strong linkages with industry and schools. You will also have the opportunity to have industry attachments or experience on a regular basis to update your skills, knowledge and practices of your profession.

[What we are looking for]

You should be trained in Mechanical Engineering, Mechatronics Engineering, Electrical and Electronics Engineering or Automotive Engineering, with at least 3 years of relevant work experience in the automotive service industry or working with vehicles, vehicles' electronics or parts like engine and transmissions. You should have the knowledge in using instruments such as diagnostic equipment, wheel alignment machines, etc and preferably with working experience on Hybrid or Electric vehicles. Previous experience as an instructor/coach in any mechanical discipline would be an advantage.

Those with good and relevant experience can look forward to Senior Lecturer or equivalent positions, with career development opportunities to leadership positions in the Colleges or Headquarters.

Applicants may check their application status at the end of 8 weeks from the closing date of this job posting.

[What you will be working on]

In addition to your teaching duties, you will carry out industry or consultancy projects to help you remain relevant in your profession and to evolving changes in industry, and maintain strong linkages with industry and schools. You will also have the opportunity to have industry attachments or experience on a regular basis to update your skills, knowledge and practices of your profession.

[What we are looking for]

You should be trained in Electrical Engineering, preferably with one or more of these experiences:

- Power generation, transmission or distribution

- Renewable energy

- Smart building

- Electric Vehicle or Autonomous Guided Vehicle

- Previous experience as a trainer would be an advantage

Those with good and relevant experience can look forward to Senior Lecturer or equivalent positions, with career development opportunities to leadership positions in the Colleges or Headquarters.

Applicants may check their application status at the end of 8 weeks from the closing date of this job posting.

[What you will be working on]

In addition to your teaching duties, you will carry out industry or consultancy projects to help you remain relevant in your profession and to evolving changes in industry, and maintain strong linkages with industry and schools. You will also have the opportunity to have industry attachments or experience on a regular basis to update your skills, knowledge and practices of your profession.

[What we are looking for]

You should be trained in Mechanical Engineering, Mechatronics Engineering, Electrical and Electronics Engineering or Automotive Engineering, with at least 3 years of relevant work experience in the automotive service industry or working with vehicles, vehicles' electronics or parts like engine and transmissions. You should have the knowledge in using instruments such as diagnostic equipment, wheel alignment machines, etc and preferably with working experience on Hybrid or Electric vehicles. Previous experience as an instructor/coach in any mechanical discipline would be an advantage.

Those with good and relevant experience can look forward to Senior Lecturer or equivalent positions, with career development opportunities to leadership positions in the Colleges or Headquarters.

Applicants may check their application status at the end of 8 weeks from the closing date of this job posting.

Job Description

Duties and Responsibilities:

· Individually handle /support the receipt and delivery of materilas

· Familiar with Singapore roads

· Driving Licence required for Class C

· Able to perform simple calculation

· 3 year working experience

· Primary education or equivalent

· Able to speak ,read and write simple English

Job Description

• Develop and maintain dimensional drawings for layouts and non-dimensional drawings.
• Revise drawings based on instructions/ comments from engineers.
• Develop computer generated drawings, cable detection drawings, isometrics, details, plans, schedules and data sheets.
• Perform other related work duties instructed by supervisor.
• Involved in coordination and preparation of specification to liaise with Project Managers and Engineers for Technical drawings and submission approval.
• Maintain good document control and filings.

Requirements

• Diploma/ Degree in Architecture/ Civil Engineering or equivalent
• Minimum 2 years of relevant working experience in the construction industry
• Proficient in Autocad and MS Office
• Good interpersonal skills and able to work as a team

• Full Sets of accounting for small entities
• Internal Auditing documentation, policies, processes, etc.
• Management reporting, schedules, cash flow, etc.
• Assist in ad-hoc work
• Assist in ERP recommendations.

Requirements

• Minimum 2-3 years in full sets of accounting and internal audit.
• Prior external auditing experience is preferred.
• Project Accounting knowledge is preferred.

Job Description & Requirements

Requirements:

• At least Diploma in Engineering (Mechanical / Mechantronics)
• At least 5 year of working experience in engineering or construction fields
• Possessing a Certificate in Building Construction Safety Supervisors would be preferable
• Able to work in a fast-paced environment and handle tight deadlines
• Able to manage workers
• Prepare MOS RAP etc
• Well versed in MS office and Autocad
• Able to design electrical system
• Class 3 driving licence holder is preferred

Responsibilities:

• Attend to all operational matters related to the daily running of the project
• Attend to customers enquiry and conduct site survey as required
• Plan and schedules works with reference to contractual schedules
• Attend site meetings and inspections, report regularly on progress and monitor schedule
• To assist in co-ordination and management of assigned projects / facilities
• Able to provide technical support

Key Responsibilities include:

• Prepare full set monthly management accounts and related schedules timely
• Prepare monthly and quarterly reports, quarterly GST reporting, various reports and government surveys.
• Billing processing, intercompany transactions
• Project cost tracking and perform account analysis
• Cash flow management
• Liaise with auditors, tax agent, company secretary, and bankers
• Ensure compliance with Company Policies, Processes, and Procedures
• Participation in ERP implementations.
• Any ad-hoc duties as assigned

Qualifications and Job Requirements:

• Min Bachelor’s degree in Finance/Accounting and above
• Good knowledge of Singapore Financial Reporting Standards, corporate tax, and GST rules.
• Minimum 3-5 years of relevant work experience in a similar role/responsibilities.
• A self-starter who is able to plan, organize and take initiative to meet job objectives and tight deadlines independently
• Self-motivated, resourceful, hands-on, multi-task, meticulous and analytical skills
• Can-do attitude, driven and passionate about work
• Open and positive mindset for job rotation
• Good communication and interpersonal skills
• Experience with MYOB
• Initial years of external audit experiences preferred.
• 3 – 5 years full sets accounting experiences.
• Prior year audit experience are welcome to apply.

Job Description & Requirements

• Lead and oversees project execution, monitor site progress, and ensure on-time completion of the project
• Project planning and project management
• Liaise closely with subcontractors, architects, consultants and authorities; set guidelines and provide expertise and supervision to the team.
• Project management, coordination, implementation, execution, control and completion of specific projects.
• Oversee the planning, analysis, recommendations in support of project construction planning, implementation and monitoring work schedules in accordance to the master and detailed work programme.
• Liaise with consultants for technical issues and coordinate with subcontractors on the site activities .
• Assist in developing and implementing corporate construction policies that support project construction.
• Managing interfaces with other contractors working on the project.
• Provide guidance to engineers in relation to construction works, ensure progress according to schedule, quality standards are maintained site inspections are carried out and technical issues are resolved on time
• Manage contractors with a focus on quality, compliance with engineering drawings; applicable code and standards, and construction schedule and cost.
• Prepare report and method statement.
• Monitor ongoing site activities.

Job Requirements:

• Exposure into Interior and Building Construction Project is an advantage
• Be dynamic, self-motivated, proactive, and results-oriented with a proven track record in the construction industry.
• Extensive experience in construction industry and project management.

Job Description

Job Description:

• Quantity take off and cost estimation based on technical details, drawings, and specifications
• Sourcing out of quotations from suppliers and subcontractors
• Evaluation of supplier and subcontractor's quotations for recommendation of competitive prices
• Assist in the preparation and submission of tender and contract documents
• Preparation and submission of progress payment claims and variation orders
• Attendance of site meeting and liaise with the cost consultant
• Measure and value the work done on site
• Evaluation and certification of supplier and subcontractor's claims
• Finalization and closing out of project accounts
• Estimation of quantities, evaluation and cost comparison of sub-contractors quotations
• Reply to sales enquiry
• Prepare and follow up sales quotation
• Prepare project subcontract
• Prepare bills of quantities and other documentation
• To approve sub-contractors’ claims for job done as per site status
• To establish progress claims as per site status and obtain client agreement for billing

Job Requirement:

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Quantity Surveying
• At least 3 Year(s) of working experience in Singapore related field.
• Preferably Executive specialized in Engineering - Civil/Construction/Structural or equivalent.
• Looking for meticulous, committed, proactive and creative thinker candidate.
• Possess sense of urgency.
• Good communication and presentation skill.
• Able to work independantly with minimun supervison.
• workplace: Woodlands

Job Description :

• Leading project planning sessions
• Managing project progress and adapt work as required
• Overseeing all incoming and outgoing project documentation schedule
• Participating in tender process, Design, submission and review
• Assessing the product and services specification of the company and comparing with customer requirements
• Monitoring performance by gathering relevant data and producing statistical report
• Communication with client on any variation orders
• Develop new business with existing clients and /or identify areas of improvement
• Negotiate contracts and close agreements to maximize profits
• Ensure the timely and successful delivery of our solutions according to customer needs and objectives
• Factory automation background with experience on design; integrations and knowledge on PLC programming will be advantage

Job Requirement :

• Degrees / Diploma in Engineering
• Min 5 or more years’ experience in Project Management
• Possess good written and verbal communication skills
• Possess own vehicle
• Excellent listening, negotiation and presentation abilities
• Ability to multi-task and manage various project elements simultaneously
• Technical understanding in automation knowledge
• Knowledge of ISO 9001, 17025 and bizSafe

• Processing of payments and financial transactions to suppliers and obtaining goods and services from suppliers promptly
• Liaising with finance officers and suppliers concerning stock management, financial records and accounts
• Verifying expense reports and querying invoice items from internal and external business finance officers
• Reconciling invoices
• Communicating with the wider Accounts Payable team and comparing system reports to better manage Accounts Payable processes
• Entering invoices into the accounts payable system
• Processing payments
• Filing and maintaining supplier records
• Checking and verifying invoices
• Preparing cheques for payment
• Performing other ad hoc tasks as required by their supervisor

Responsibility:

• Reviewing construction plans and preparing quantity requirements.
• Liaising with site managers, clients, contractors, and subcontractors.
• Preparing reports, analyses, contracts, budgets, risk assessment, and other documents.
• Keeping track of materials and ordering more when required.
• Documenting any changes in design and updating budgets.
• Establishing and maintaining professional relationships with external and internal stakeholders.
• Traveling from the office to various sites as required.

Requirements:

• Bachelor's degree OR Polytechnic Diploma in Quantity Surveying, Engineering, or equivalent.
• Construction, M&E services knowledge and experience in AutoCAD drafting are advantageous.
• Excellent interpersonal skills.
• Ability to organize, plan, and strategize.

Job Description & Requirements

Roles & Responsibilities

Technician Responsibilities:

• Inspecting, analyzing, and troubleshooting systems and equipment.
• Carry out troubleshooting and minor repairs to building works and M&E works including air-conditioning, electrical, plumbing and fire protection system.
• Involved in coordination and supervisor of construction works
• Responsible for planning, managing and ensuring smooth implementation and monitoring of projects assigned
• Responsible for effective site management which include safety inspection and quality control of materials and plants on site
• Required to plan, lead and monitor progress and performance against the project plan whilst managing the day-to-day operational aspects of projects which includes manpower planning, construction progress monitoring, preparation of master schedule and cost control.

Technician Requirements:

• High school diploma.
• Experience as a technician.
• Ability to multitask and liaise with professionals in different fields.
• Ability to explain problems simply and clearly.
• Proficiency in MS Office.
• Ability to understand verbal and written instructions.
• Ability to follow health and safety regulations.
• Excellent mathematical and problem-solving skills.

About our group:

Sputtering is the heart of media process in recording media organization. We are a dynamic team working in a world’s largest state-of-the art magnetic media manufacturing environment with highly automated processes and advanced control systems.

We pride ourselves on delivering committed equipment performance and operational objectives through effective maintenance, technology, and innovation to help Seagate succeed. Our team is made up of committed, talented, and friendly people passionate about our job, believing in people well-being and people development.

New employee will have positive experiences with our comprehensive induction and training programs with buddy system.

About the role - you will:

• Perform preventive maintenance and product conversion of the sputtering tool.
• Work with equipment and process engineering on continuous tool improvement on reliability performance and product defect reduction.
• Initiate ideas on equipment OEE and productivity improvement, safety hazards and cost saving reduction projects.
• Be trained to utilize data analytics and machine learning applications for tool troubleshooting and your feedback will be sought after for further improvements
• Be trained on vacuum technology fundamental and have the opportunities for continual learning and growth.

About you:

• Self-motivated and positive working attitude.
• Team player with good problem-solving skill.
• Willing to work in a clean room environment.
• Willing to work on 12 hours shift pattern.

Your experience includes:

• Diploma in Mechanical, Electrical, Mechatronic Engineering or Diploma or ITE
• Knowledge or experience in Mechanical or Electronics
• Troubleshooting Mechanical or Electrical Equipment is an advantage
• Clean room experience will be an advantage
• Data analysis and MS office skills
• Fresh graduates are welcome

Location:

Our Woodlands site is one of the largest electronics manufacturing sites in Singapore, housing our recording media operations. Spread over three sites, it is easily accessible via bus or from the MRT Station, with many employees taking mass transportation to work. Here at work, you can enjoy breakfast, lunch, dinner, and snacks at our onsite canteen and coffee shop. We offer a range of facilities including an in-house gym and dance studio, as well as after-work badminton and table tennis competitions. On-site celebrations and community volunteer opportunities also abound.