Undertake a variety of projects, managing scope, cost, time, risk, resources, procurements, quality and communications in accordance with company policies, processes and procedures, whilst adhering to client contractual obligations. Regular client liaison will take place, managing expectations, and ensuring appropriate stakeholder satisfaction is apparent via pro-active management of project scope ensuring all milestones are met.

· Ensuring all assigned projects are administered in accordance with company’s Quality Management System and to agreed contractual obligations.

· Implementing projects according to contract terms, project goals and objectives, in a pro-active manner, including regular interface with all stakeholders such as clients, certifying authorities, contractors/suppliers and staff/personnel as necessary.

· Ensuring project definition is apparent, clarifying scope, estimates and assumptions with sales team during project handovers.

· Ensuring all appropriate projects are kicked off, their meetings are effective, congruent with the project scope and set the tone for success.

· Attendance to client meetings regarding appropriate project matters as and when required.

· Preparation of project plans in a timely manner.

· Creating and updating project schedules, ensuring critical path activities are understood and communicated.

· Ensuring project procurements are considered in terms of cost, time and quality.

· Understanding project commercial drivers and costs, controlling activities to limit adverse impact upon project finances.

· Preparation of documentation packs for workshop activities to enable efficient product realisation and mobilisation within time demands of the project, ensuring appropriate reviews take place with necessary personnel.

· Preparation of documentation packs for worksite execution (On/Offshore) ensuring appropriate reviews take place with necessary personnel including pre- and post-briefings.

· Ensuring the Design Engineering department is appraised of the project scope such that all engineering activities and calculations are carried out to verify the suitability of equipment

· Where contractually obliged, attendance offshore to assure project execution and fulfilment.

• Leading project planning sessions
• Coordinating staff and internal resources
• Managing project progress and adapt work as required
• Ensuring projects meet deadlines
• Managing relationships with clients and stakeholders
• Designing and signing off on contracts
• Overseeing all incoming and outgoing project documentation
• Participating in tender process i.e. design, submission and review
• Designing risk mitigation plan
• Conducting project review and creating detailed reports for executive staff
• Optimising and improving processes and the overall approach where necessary
• Securing growth opportunities and initiating new projects
• Managing large and diverse teams

• Supporting project communication systems Installation, Configuration, Integration and Testing at customer site to ensure timely project delivery.
• Working closely with subcontractors to ensure tasks on site are completed on schedule.
• Understanding the system and be able to perform system fault isolation and troubleshooting.
• Collaborating with fellow engineers / engineering team in system setup, system validation and problem resolution.
• Supporting the generation of project documentation

Requirements

Primary Work Location: Jurong East Hub

Working Hours : 8.30am – 6pm

Qualification : Diploma in Mechatronic, Mechanical, Electrical & Electronic

• Fun & Energetic Team, 5 days week, Attractive Commission
• Career Growth & Development, On job training & learning
• Flexible Working Hours (no OT), Work life balance

Job Description

At Aesperon Academy, we offer a range of courses such as the following:

• Building and Construction Authority (BCA) approved CoreTrade courses
• WSQ Corporate Courses
• Safety Courses
• We are also a Workforce Skills Qualifications (WSQ) Approved Training Organisation.
• The Sales Executive is responsible for obtaining new leads and following up with prospective and existing clients.
• A comprehensive training program will be taught by our experienced Sales Team leader and guidance will be provided. We will introduce you to the list of courses on offer and teach you tried-and-tested techniques for better customer acquisition!
• Motivated and Driven
• Comfortable speaking to potential clients
• Detailed

• Benefits:
• You will have the chance to learn other roles if you're suitable
• A promotion to a leading role if you exhibit relevant competencies
• Personal transport preferred.
• Commission base.

Requirements

• Possess 'O' Levels Certification and above
• Working Location: Changi
• Working hours: 9am to 6pm (Monday to Friday)

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit/replacement recommendations to clients

5. On-the-job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement/process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of faults/breakdowns and rectification according to authorities/clients' requirements.

9. Perform full set of testing complying with authorities/clients' requirements.

10. Perform maintenance programs and comply to authorities/clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Responsibilities:

• To ensure timely service and customer’s satisfaction are met eg follow up on customers' enquires and quotations, processing orders, invoicing, prepare sales reports, liaise with customers and internal departments to ensure orders and delivery schedules are on time.

Requirements:

• Fresh degree holders are welcome to apply.
• Training will be provided.
• Proactive, independent, team player.
• Able to cope with fast pace environment.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Responsibilities:

• Perform administrative and general office support.
• Maintains both physical and digital filing system.
• Assist with SAP requests, DO and invoice processing.
• Assist with updating dept budgets and expenses.
• Assist with Dept budget and expenses tracking.
• Track and manage fixed Asset.
• Control and update records for PSM devices in TCSI.
• Maintain the stationery cabinets, ensuring items are properly stocked and replenished when necessary.
• Submit security clearance application for staff.
• Assist in onboarding new staff by preparing necessary document and orientation sessions.

Requirements:

• Minimum O/ A Level
• Minimum 1 year of administrative experience
• Good Knowledge in MS office
• Good Interpersonal, presentation & communication skills
• Well organized and able to work independently with min supervision
• Good team player
• Experience developing internal processes and filing systems
• Candidate with some finance accounting knowledge will be an advantage

Responsibilities:

• Check and count physical quantity of incoming AFE deliveries in N4 and warehouse including RCWS & C4 equipment, harnesses, radios and RCWS LRU
• Key in excel sheet on incoming AFE deliveries, assist in keeping track and monitoring shortages
• Track and key in SNCA and monitor on all AFE SNCA including tracking of return items from SNCA
• Assist in documentation and filing, keeping track and updating of folio sheets
• Tracking and keying of Patents cost
• Assist in preparing documentation for billing

Requirements:

• O Level with a few years of working experience in administrative or engineering-related roles
• Or Diploma in related field with or without prior working experience.
• Proficiency in Microsoft Excel and Word.

- Well verse in the application of different manufacturing precision methods.

- Knowledge in CNC technology. Able to use Cad/cam software and mazatrol programming is a bonus

- Assist in job planning and management of factory operation

- Basic excel and computer related skills

-Job include overtime and attractive bonuses

Job Purpose :

Engineer produces specifications for, design, develop technical drawings. He/she is expected to service and give technical advice to customers and fellow colleagues. He/she will be the main contact person for shutdown projects.

Duties and Responsibilities :

* Attend site / plant shutdown meeting

* Relay information to sales to work on preliminary quotation

* Liaise with Customers and Sales to carry out production of work orders as specified

* Liaise with Sales with regards to availability of raw materials for production or request purchase of required material when necessary.

* Monitoring progress reports on gasket usage by Customers during plan shutdown (container service) and generate weekly consumption report for customer.

* Compile and consolidate all expenses incurred by the Company (ie. manpower, overtime, meals and transportation) during shutdown project period.

* Attend to quality and technical problems at client's site and recommend the use of appropriate substitutes.

* Attend to quality and technical questions from fellow colleagues.

* Planning of work schedule for shutdown projects.

* Allocation of manpower for shutdown projects.

* Conduct product presentation to customer.

* Verify materials for use in manufacturing as specified in the work orders.

* Ensure smooth running of projects from beginning to the end.

* Ensure to meet customer's project deadline within time frame given.

* Ensure stocks are sufficient to support customers during the shutdown project.

* Maintain and housekeep all records of equipment drawings.

* Handle customer's complaint, if any

* Determine and plan training requirement needs of subordinating staff.

* Plan for the staffing requirements and recruitment of new employees if needed.

* Design technical training materials for other departments.

* Any other duties assigned by Business Unit Manager.

• Handle general office tasks and administrative duties
• Directing communication betwwen colleagus and customers, organizing schedules and events, entering data, bookeping, maintaining office equipments and so on.
• Enales teams to be focused on their goals and prepared for anything that comes their way.
• Responsible for the work of the human resources department

• The preparation of the companies QA manual control and supervision of all amendments and revisions
• Control and the distribution of all the companies quality documentation
• Monitor all quality related activities on the project
• Perform all internal and external audits on behalf of the companies management
• Verify contractor quality requirements are specified to vendors and contractor documentation submittals.
• Attend all pre-bid meetings and coordinate all project requirements with the project bidders.
• Attend client quality management meetings
• The preparation and control of project quality system management documentation prior to project commencement.
• Review quality inspection personnel qualifications and training requirements
• Monitor the disposition of all issued nonconformance reports.

Responsibilities:-

• Provide admin support to operation as well as quality control & safety/health dept
• Assist in administrative duties and other duties as assigned

Requirements:-

• Minimum Diploma or equivalent
• Possess 2 years of experience preferably in oil & gas industry will be an advantage
• Matured personality, dynamic, self-motivated and result-oriented
• Able to work independently with min supervision
• Positive attitude and good personality
• Proficient in MS Office

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Responsibilities:

• Operate 4-5 axis CNC Vertical Milling Machines and Horizontal Boring Machines.
• Set up machines accurately, including tooling, fixtures, and workpieces, based on engineering drawings and job specifications.
• Keep up with the housekeeping requirements at the workstation.
• Carries out duties as assigned by Foreman.

Requirements:

• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre.
• Understanding of tooling criteria, machining applications and process documentation.
• Min ITE Technical Certificate, preferably in Precision Metal Machining.

Job Description

• To install, repair and maintain mechanical equipment both manually and with mechanical tools
• Fabricates parts and sub-assemblies of machinery and related mechanical equipment to drawing specifications, using bench fitting tools
• Dismantles, inspects and refits parts and reassembles mechanical equipment
• Assembles and installs new mechanical fixtures
• Follow strictly to Risk Assessment before work commencement
• Ensure personal safety and others
• Handle tools and equipment with care
• Co-ordinate with other processes for continuous work flow and smoother job completion within job schedule
• Maintain good housekeeping

Requirements:

• Relevant trade certificate or equivalent
• Related experience in mechanical/electrical works
• Able to speak and understand simple English
• Physical works required and able to carry heavy load
• Knowledge on how to use simple tools and principles of fitting
• General knowledge in basic marine/electrical fitting

Responsibilities:

• Manage and organize project documentation, records, and correspondence.
• Prepare reports, presentations, and meeting agendas.
• Handle general office administration tasks, such as ordering supplies and maintaining filing systems.
• Assist in scheduling and coordinating meetings, site visits, and project milestones.
• Record and distribute meeting minutes and follow up on action items.
• Support the team in tracking project timelines and deliverables.
• Act as the point of contact for internal and external stakeholders regarding administrative matters.
• Coordinate with vendors, consultants, and contractors to ensure seamless communication and documentation.
• Facilitate the flow of information between project team members.
• Process invoices, expense claims, and purchase orders related to project operations.
• Monitor and track project-related expenditures and maintain financial records.
• Manage calendars and appointments for team members.
• Ensure compliance with company policies and procedures in all administrative activities.
• Provide ad-hoc support as required by the project or management team.

Requirements:

• Diploma with 3-5 years of relevant working experience.
• Proficient in MS Office (Excel/Words/PowerPoint)
• Good communication and organizational skills
• Highly self-motivated, good working attitude and a good team player
• Independent with the ability to work with minimum supervision.

Job Description

- Ensuring the smooth day-to-day operation.

- To plan the job schedule for the workers and subcontractors.

- Monitor the progress of the job, record achievements and report to the manager.

- Troubleshoot any issues that occur on the construction site.

Requirements & Qualification

- Diploma / Degree in Engineering, Technical or Construction.

- Certifications in Project Management.

- Good planning, Leadership,and Problem solving.

• Report to Construction Manager
• Manage and oversee construction activities near existing SPPG tunnel/GTP
• Coordination between client, consultant and sub-contractor(vendors)
• Ensure compliance with safety procedure and regulations
• Carry-out regular inspections and regular checks of concerned construction activities
• Resolve technical and engineering issue
• Ensure proper documentation (including Risk assessment/Method statement) and record-keeping of construction activities
• Ensure the activities comply with the local Authorities’ quality, environment, health & safety requirements and Clients’ General Specification
• Ensuring Permit to Work (PTW) is verified and valid for assigned duties.

Job Requirements:

• Degree in Civil Engineering from a recognized university, accredited by the Singapore PE Board
• Registered Resident Engineer with IES and valid certification in Singapore (Mandatory)
• Minimum of 1 year of Engineering experience
• 2 years of experience in the supervision of construction projects preferred
• Progress oriented, team player
• Technical expertise and knowledge in Civil Engineering Construction especially piling/RC works
• Proficient in Microsoft Offic and Auto CAD
• Attained CSCPM/BCSS/Confined space/Work At Height
• Good interpersonal skills and hardworking
• Location : Woodlands
• Project : Viaducts

Responsibilities:-

• Provide sales support which includes quotation preparation, processing of orders and overseeing the delivery process to customers
• Maintain close communication with customers
• Perform some administrative duties and multi-task other duties as assigned

Requirements:-

• Minimum Diploma in Engineering or equivalent
• Possess 2 years of experience & familiar with commercial documentation. Those who have worked in Marine or Oil & Gas industries will be an advantage
• Matured personality, dynamic, self-motivated and result-oriented
• Able to work independently with min supervision
• Positive attitude and good personality
• Able to work in tight schedule and under pressure
• Proficient in MS Office

We are looking for Electrical Engineers to expand our team.
Candidates with no experience are welcome to apply.

Responsibilities:

• Draw or modify electrical and GA diagrams or write engineering specifications to clarify design details and functional criteria of the equipment with respect to customers' requirement
• Conduct inspection and quality check of electrical equipment
• Conduct installation and troubleshooting of electrical equipment
• Set up and operate test equipment for calibration or configuration of electrical equipment
• Keen mind on quality management, with good documentation, continuous improvement of processes.
• Keen mind on operational planning to ensure good continuous supply of equipment for customers and internal requirement
• Support sales personnel for technical clarifications with customers
• Involve in pre-sales activity of machinery sales, e.g. sizing of generators, studying of tender documents etc.

Requirements:

• Minimum Diploma in Electrical Engineering or any relevant course
• Candidates with no experience are welcome to apply
• Ability to read and amend schematic drawings & circuit drawings
• Experience and knowledge in generators a plus
• Excellent interpersonal and communication skills

Responsibilities

• Perform Reliability, Maintainability and Supportability (RMS) analysis, to ensure an effective through life support capability package to support the System.
• Engage design engineers on design specifications and influence Reliability and Maintainability (RAM) in their design.
• Engage customers and contractors, and to ensure RAM and ILS deliverables are on schedule and of quality.
• Lead ILS team of technical writers, technical trainers and supply support management to ensure supportability of the Systems.

Requirements

• Degree in Mechanical Engineering or Mechatronics Engineering or equivalent.
• Preferably RAM and ILS knowledge. Training / OJT will be provided, if not equipped with basic statistics skills.
• Preferably knowledge in either Automotive and/or Artillery systems.
• Meticulous in quantitative analysis and strong in statistical analysis.
• Good leadership skills and project management skills.
• Strong communication & interpersonal skills.
• Entry Level candidate are welcome to apply

Key Responsibilities:

• Manage full accounts cycle, including bank reconciliation and journal entries.
• Ensure accurate data entry in for all transactions.
• Prepare financial data for entry into the financial system
• Keep accounting records and bank statements
• Ensure timely, accurate month-end and year-end closing
• Prepare and file GST returns
• Preparation of tax computation and tax planning
• Filling tax returns on time and updating the management about new changes in rules and regulations.
• Liaise and coordinate with external auditors and tax agents;
• Ensure accounting deadlines are met;
• Review subsidiary accounts
• Other ad hoc duties

Job Requirement

• Diploma in Accountancy or equivalent.
• Minimum 2 years of relevant accounting experience.
• Have prior experience in handling full set of accounts and statutory reporting
• Independent to fulfil tasks and a team player to perform tasks in the company workflow

*Expected to conduct equipment training*

The Job:

Training

1. Achieve annual department budget and targeted trainee participation
2. Provide guidance to trainers for conduct of WSQ courses with alignment to stat board regulatory requirements
3. Upkeep SSG ATO and ITE COJTC status as an accredited training provider
4. Develop training programs on MHE and collaborate with Subject Matter Experts for smooth delivery of training course syllabus

Curriculum Developer:

1. Develop new coursewares (Product and Process) to meet market trend and demands
2. Submit new coursewares for regulatory approval for course commencement
3. Enhance existing coursewares to meet regulatory requirements
4. To maintain course registry records and filing

The Person:

• Min Diploma – preferably Engineering
• Attained full WSQ DACE/DDDLP certification
• Min 3 yrs of experience
• Possesses Class 3 and Forklift license and has experience operating it, comfortably
• Written and oral communication skills, specifically an ability to engage an audience on training topics to solidify adoption of product.
• Effectively bi-lingual in English and Mandarin
• Develop and design courses/curriculum for all learning needs.
• Knowledge on WSH requirements
• To integrate teaching methodologies, learning styles and educational materials for better engagement to meet learning outcomes
• Must be able to do stand-up trainings for internal and external stakeholder
• Experienced in developing training plans
• Sales and marketing of courses
• Full Advanced Cert in Training and Assessment (ACTA)