Job Requirements

• Leading a Team of Tankage Design Engineers to execute the Tankage Design Engineering of the Project which includes design of Fixed Roof Tank / Floating Roof Tank as per API 650, Low Pressure Tank as per API 620, Spherical Tank and Bullets as per ASME Section VIII & Cryogenic Double Wall Tanks as per API 620 & API 625.
• Review & Checking of Tankage Design Documents such as Design Calculation for Tank, Finite Element Analysis, Tank Data Sheets, Tankage Material specification, Tankage Fabrication Drawings & ensure Compliance to API 650, API 620, API 625, ASME Sec VIII, AP 2000 and all Applicable Codes & Standards.
• Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies.
• Preparation, Monitoring and Control Engineering Document Control List and expedite for delay / approvals / resolution of open issues.
• Review and ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team
• Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.
• Coordination with PMC and Construction Coordination.
• Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness and correctness in works.
• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.
• Preparation of Technical Specification for Works and Technical Bid Evaluation
• Preparation and Compliance for Engineering Audit Requirements.
• Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.
• Technical assistance to construction activities and attending to Site Queries.
• Preparation of Foundation Loading Data.
• Generate 2D construction drawings and data sheet.
• Preparation of purchase requisition for tank accessories such as roof seal, roof drain system, aluminium dome roof & etc. Preparing technical bid evaluation for item purchased. Checking vendor’s calculation & construction drawings.
• Checking of construction drawings. Preparation of bill of material for purchasing.
• Preparation of technical queries to client base on design deviation.
• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelor of Engineering (Mechanical)

Experience

Preferably Minimum 15 years of experience

Software Requirements

1) Autocad

2) Good proficiency in MS Excel, MS word

Code Knowledge

1) API 650/ API 620

2) ASME Section VIII D1 & D2

3) ASME Section II Part A & D

4) ASTM

5) NFPA

• Assisting in the recruitment and onboarding of new hires
• Ensuring compliance with safety and professional standards within a facility
• Organizing, monitoring, and prioritizing tasks to meet production goals
• Evaluating various stations of the production operation to ensure optimum efficiency
• Maintaining communication between employees and senior executives to ensure procedures and policies are well-understood
• Ensuring the flow of raw materials and other resources.
• Supervising operations within a facility to achieve higher output.

Production Engineer Responsibilities:

• Supervising the manufacturing processes, ensuring quality work is done in a safe, efficient manner.
• Liaising with other engineers to develop plans that improve production, costs, and labor required.
• Diagnosing problems in the production line and providing recommendations and training.
• Establishing safety procedures and protocols that take the workers' well-being into account, and that also minimize the carbon footprint.
• Keeping abreast of advancements in engineering and production, and sharing knowledge with co-workers.
• Identifying, documenting, and reporting unsafe practices.
• Drawing up production schedules and budgets for projects.
• Scheduling meetings with relevant departments and stakeholders.
• Analyzing all facets of production and making recommendations for improvement.
• Obtaining any materials and equipment required.

• Location: Tuas
• Work-Life Balance
• Yearly appraisals salary adjustment（Based on performance)
• Singlife Medical Insurance Benefits

Responsibilities :

• Prepare group consolidation, financial report and financial analysis.
• Prepare and submit of consolidated monthly financial reports.
• Oversee the accounts of subsidiaries companies within the Group to ensure timely monthly closing and reporting.
• Statistics / survey preparation and submission
• Provide accounting advice to colleagues and associate companies to ensure common application of accounting guideline, policies and procedures.
• Handle subsidiaries/associate companies in forecast reporting and in their management accounts process. Liaise with external auditors in annual financial audit and statutory reporting for the Group.
• Prepare Group’s annual budget and quarterly rolling forecast.
• Assist Accounts Dept in ad-hoc tasks as may be assigned.
• Review and approve WIP
• Analyse, prepare, explain, and submit Flash report to Directors/Shareholders
• Liaising with all auditors and tax agents

Requirements :-

• Degree/Diploma in Accountancy or equivalent professional qualification
• 5 years accounting experience
• Ability to work independently with minimum supervision

*Only shortlisted candidates would be notified**

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Coordinate with Engineering and construction team to develop comprehensive commissioning plans and schedules
• Work closely with vendors, Engineering and construction team to plan and execute commissioning activities
• Identify and resolve issues encountered during commissioning activities promptly and effectively to minimize downtime and ensure project timelines are met
• Review schematics of critical equipments, test procedutes to ensure smooth integration into power grid
• Maintain records of commissioning activities, test results, and equipment performance data
• Participate in meetings with client and vendors
• Ensure adherence to all safety protocols and regulations
• Any other duties to be assigned from time to time

Pre-requisites

• Degree/Diploma in Electrical Engineering or related field
• Minimum 5 years of experience in commissioning of power plants
• In-depth knowledge of electrical systems for critical equipments in power plant construction
• Strong understanding of commissioning processes, procedures, and best practices
• Proficiency in interpreting engineering drawings, specifications, and technical documents
• Excellent problem-solving skills and ability to work effectively under pressure
• Effective communication and interpersonal skills for collaboration with multidisciplinary teams
• Commitment to safety and compliance with regulatory requirements

Responsibilities

• Work as Senior Tankage Design Engineers to execute the Tankage Design Engineering of

the Project which includes design of Fixed Roof Tank / Floating Roof Tank as per API 650,

Low Pressure Tank as per API 620, Spherical Tank and Bullets as per ASME Section VIII &

Cryogenic Double Wall Tanks as per API 620 & API 625.

• Preparation, Review & Checking of Tankage Design Documents such as Design Calculation

for Tank, Finite Element Analysis, Tank Data Sheets, Tankage Material specification,

Tankage Fabrication Drawings & ensure Compliance to API 650, API 620, API 625, ASME

Sec VIII, AP 2000 and all Applicable Codes & Standards.

• Prepare all Tankage documents in accordance with project specification. Maintain Design

integrity and quality within the Project Engineering Team

• Preparing Engineering schedule and Engineering man hours estimation to meet project

requirements.

• Coordination with PMC and Construction Coordination.

• Participates in discipline and inter-discipline design check and screening meetings for

compatibility, completeness and correctness in works.

• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

• Preparation of Technical Specification for Works and Technical Bid Evaluation

• Technical assistance to construction activities and attending to Site Queries.

• Preparation of Foundation Loading Data.

• Generate 2D construction drawings and data sheet.

• Preparation of purchase requisition for tank accessories such as roof seal, roof drain system,

aluminium dome roof & etc. Preparing technical bid evaluation for item purchased.

Checking vendor’s calculation & construction drawings.

• Checking of construction drawings. Preparation of bill of material for purchasing.

• Preparation of technical queries to client base on design deviation.

• To be proactive in creating a safe working environment for everyone and ensuring that HSE

in-house rules are observed at all times.

• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce

HSE hazards, aspects and risks.

• Any additional Adhoc related work

Qualification

Preferably Bachelor of Engineering (Mechanical)

Experience

Preferably Min. 10 years’ experience in oil and gas.

Software Requirements

• Autocad

• Good proficiency in MS Excel , MS word

Code Knowledge

• API 650/ API 620

• ASME Section VIII D1 & D2

• ASME Section II Part A & D

• ASTM

• NFPA

Job Description:

• Involve in Site Management.
• Heading a team of site supervisors and subcontractors.
• Coordinate works, liaise with clients and consultants. Ensure overall construction progress base on schedule.
• Enforcement of quality control and safe management control.
• Keeping site staff and subcontractors informed on approved materials & latest drawings.
• Coordination of different trades on site.

Requirements:

• Diploma or Degree in Mechanical Engineering.
• Knowledge in residential & commercial building installation works.
• Knowledge in design skills and usage of AutoCAD/ Revit will have added advantage.
• Those familiar with HDB projects will have added advantage.
• Applicants without relevant qualification must have minimum 3 years' experience in similar capacity.
• Training provided for fresh graduates with no experience.

Job Description:

The Sales Executive will promote the Company’s assets for rental and sales and will be accountable for the entire sales process. He/She will need to visit clients (new and old) and their project sites or new sites to canvass for business and successfully secure the order. He/She will also need to liaise with the Operations team to ensure smooth delivery of the assets to the client site. He/She will also need to follow up with their clients to ensure that invoices are paid and monies collected within a reasonable time frame.

He/She will report directly to the Sales Manager (if applicable), or directly to Managing Director and General Manager and will regularly update them on sales pipeline, discussion progress and implements activities to achieve the targets set by the Company.

Job Requirements

• Must be self driven and have an entrepreneurial mindset
• Prefer those with sales background
• Those with prior heavy machinery or construction equipment sales or rental experience will have an added advantage.
• Possess a valid and minimum Class 3 driving license
• Good communications and soft people skills
• Be able to submit daily updates, and weekly reports to management

• Familiar with evaluation of tenders, preparation of tender and quotation.

• Responsible for taking off measurement and monthly progress claim.

• Ability to source for supplies and sub-contractors for quotation for tendering.

• Project administration and documentation include preparation of interim.

• Review and advise the Project Manager on the cost impact for variation of project specification.

• Minimum Diploma in Quantity Surveying or a related field.

• A minimum of 2 years work experience in structural steel works is necessary for this position.

•full-time position available.

•All applications to be strictly via emails.

Requirements

• Bachelor’s degree, preferably in Accounting or Finance.

• Minimum 5 years of relevant experience in financial institutions or similar environments.

• Strong communication and interpersonal skills to build relationships across departments.

• A team-oriented mindset with the ability to work independently and deliver quality results.

• Leadership experience is an advantage.

• Analytical and detail-oriented, with a strong commitment to accuracy.

• Open to learning, adaptable, and ready to take on new challenges.

Key Responsibilities

• Manage complete or partial accounts (Accounts Payable/Accounts Receivable)
• Perform bookkeeping and data entry tasks
• Process payments related to supplier invoices and cheque issuance
• Ensure the accuracy of account codes and cost center allocations
• Review Accounts Receivable Aging report and investigate outstanding balances
• Assist with month-end closing procedures
• Prepare monthly statements and send reminders to customers
• Perform other ad-hoc duties as assigned

• Manage all Accounts Payable functions, ensuring timely and accurate processing of transactions.

• Analyze financial data to support reporting and compliance requirements.

• Collaborate with cross-functional teams to resolve AP-related issues and ensure seamless operations.

• Take on additional responsibilities as required, demonstrating adaptability and a proactive approach.

Job Requirements

1. Proficient in both English and Mandarin are essential to understand documents and communicate with suppliers
2. Good attitude
3. Experience: No experience needed (on-the-job training provided)
4. Education: Secondary education and above (or equivalent)
5. Skill: Farmiliar with basic computer functions, Microsoft Word and Microsoft Excel

Job Description

1. Assist in data entry and administrative tasks
2. Assist in general office work

Must have prior knowledge about singapore manpower rules and regulations, should posses all certification on date

ability to handle foriegn workers

must be fluent in foriegn langugages to communicate with the workers

must be required to do adhoc jobs when needed

Responsibilities:

• Supervise/perform fault diagnosis, trouble shooting and maintenance of power system/component in workshops and onboard vessels
• Liaise with various departments within company and client to expedite the scope of work
• Lead a team of electricians in corrective and preventive maintenance
• Prepare work completion reports for Customer’s Acceptance.
• Perform maintenance works in accordance with vessel safety requirement
• Conduct in-depth troubleshooting of electrical connections and Programmable Logic Controllers (PLC) programs.
• Coordinate with vendors and partners, conduct design reviews with customers, and maintain documentation according to our ISO quality systems.

Requirements:

• Diploma in Electrical Engineering
• 2-5 years of relevant experience in the Marine related or Oil & Gas industry
• Candidate with no experience may apply
• Experienced dealing with 440V Main switchboard, Distribution Boards, Transformer, Power Generator, Main Engine, Converter, Inverter Batteries, Fire alarm & flooding system and Ship Control Monitoring & Management System
• Experience in troubleshooting on various brands of PLCs (Panasonic, Omron, Allen Bradley, Siemens, Mitsubishi, ABB, etc.) is advantageous
• Proficient in selection and integration of sensors, pneumatic systems, Stepper and Servo Motors & control systems, Power Supply Units, other electrical hard wares, etc.
• Possess man management experience in leading up to 6 men, including Supervisors and Technicians
• Willing to work as a team player to achieve assigned task within given timeline.
• Comfortable with report writing
• Able to work onboard vessels and at heights

• Other Information:
  Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Job Description:

• Involve in Site Management.
• Heading a team of site supervisors and subcontractors.
• Coordinate works, liaise with clients and consultants. Ensure overall construction progress base on schedule.
• Enforcement of quality control and safe management control.
• Keeping site staff and subcontractors informed on approved materials & latest drawings.
• Coordination of different trades on site.

Requirements:

• Diploma or Degree in Mechanical Engineering.
• Knowledge in residential & commercial building installation works.
• Knowledge in design skills and usage of AutoCAD/ Revit will have added advantage.
• Those familiar with HDB projects will have added advantage.
• Applicants without relevant qualification must have minimum 3 years' experience in similar capacity.
• Training provided for fresh graduates with no experience.

Job Description & Requirements:

• Degree in Electrical Engineering.
• Good design and installation knowledge of electrical in residential & commercial buildings.
• With strong leadership skill, ability to be agile, can adapt quickly to change and pivot, high level intiative, project management and communication skills.
• Able to work independently and under pressure.
• Minimum 6 years’ relevant working experience and proven track records in Singapore.
• Fluent in spoken English.
• Preferably with Class 3 driving license.

• Cooling Equipment, Chiller
• Basic up to $5000
• High Variable bonus + Mobile Allowance + Other Allowance
• Work-Life Balance
• Yearly appraisals salary adjustment（Based on performance)
• Singlife Medical Insurance Benefits

Responsibilities:

• Oversee and manage the projects assigned to ensure on track as per requirement
• Work closely with customers, engineers and contractors to assess equipment needs, and to determine system requirements.
• Prepare project document, drawing submissions and support other team members in execution and coordination
• Attend meeting with customer, team members and contractors where required
• Coordinate and schedule submission, delivery and T&C schedule with clients and contractors
• Performing quality control tasks on equipment, budgets, schedules, plans, and personnel performance and reporting on the project's status
• Ensuring the project's compliance with the applicable codes, safety practices, policies, performance standards, and specifications.
• Perform site survey to ensure that equipment is delivered and installed in proper manner as per requirement
• Perform and lead the T&C of equipment as per the timeline provided by clients
• Troubleshooting of equipment with RCA reports where required

Requirements:

• Diploma / Degree in Mechanical/Electrical Engineering or related field
• Flexibility to travel at any given time
• Prefer candidate with Class 3 driving license.

*Only shortlisted candidates would be notified**

• Plan and coordinate administrative procedures and systems and devise ways to streamline processes
• Recruit and train personnel and allocate responsibilities and office space
• Assess staff performance and provide coaching and guidance to ensure maximum efficiency
• Ensure the smooth and adequate flow of information within the company to facilitate other business operations
• Manage schedules and deadlines
• Monitor inventory of office supplies and the purchasing of new material with attention to budgetary constraints
• Monitor costs and expenses to assist in budget preparation
• Oversee facilities services, maintenance activities and tradespersons (e.g electricians)
• Organize and supervise other office activities (recycling, renovations, event planning etc.)
• Ensure operations adhere to policies and regulations

Position: Project Engineer

Job Highlights

· 5.5 Days Work Week

· Familiar In Steel Structure

· To supervise and manage all related matters with regard to the day to day civil activities on the project with the objective of meeting the schedule quality and safety objectives .

· To ensure all works are carried out in line with SCDF health and safety standards in order to provide high quality works in safe and efficient manner.

· Drafting using Tekla and Auto Cad

Job Requirements

· Good communication skills

· Conduct regular site visits to ensure compliance with contract specifications and design plans

· Project Planning , coordination and supervision of technical aspects of construction projects

· Conduct joint inspection with RE and RTO

· To assist the Project Manager in the daily execution of work.

· Attend Meeting if necessary

· Arrange Heavy Equiptment /transportation if necessary

· Provide weekly update to the Project /Site Manager

· Able to plan/coordinate site works and resolve drawing details and discrepancies

· Tendering & Proposal

· Ad-hoc assignment as required by the management

Qualifications and Experience

· Minimum with 3 years of experience at construction sites

· Pre-planed prepare construction schedule ,coordinate activities

· Candidate must possess at least , Bachelor’s Degree / Professional Degree , Master’s Degree in any field

· Liaise with both internal and external parties for efficiency

· Other ad-hoc duties as assigned by Project Manager

· Prefer knowledge in Tekla , Auto CAD

· NOT for BIM Modeller Application

·

Roles & Responsibilities:

To ensure the smooth operation of site activities

To provide logistical support (site utilisation) when needed, as requested by sub-contractors

To be the liaison for the coordination of different trades within the same discipline

Responsible for all on-site engineering issues pertaining to site matters

To coordinate with sub-contractors and attend to clients' queries to ensure timely work arrangements

To be involved in the day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule and the local authorities’ quality standard

To manage project documentation and maintain accurate records

Ensure compliance with all health and safety regulations

Requirements:

Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification

Experience / Knowledge in in Bridge Construction/ Crosshead/ Lifting Frame /Launching Gantry Operation/ Pre-cast Segment Method/ MRT/ LTA will be an added advantage

More than 3 years of site experience in the construction sector, preferably in the superstructure crosshead/ precast segmental bridge and Launching Gantry operation or similar

Good team player and able to work independently

BCSS Certification

• Location: Tuas
• Work-Life Balance
• Yearly appraisals salary adjustment（Based on performance)
• Singlife Medical Insurance Benefits

Responsibilities :

• Prepare group consolidation, financial report and financial analysis.
• Prepare and submit of consolidated monthly financial reports.
• Oversee the accounts of subsidiaries companies within the Group to ensure timely monthly closing and reporting.
• Statistics / survey preparation and submission
• Provide accounting advice to colleagues and associate companies to ensure common application of accounting guideline, policies and procedures.
• Handle subsidiaries/associate companies in forecast reporting and in their management accounts process. Liaise with external auditors in annual financial audit and statutory reporting for the Group.
• Prepare Group’s annual budget and quarterly rolling forecast.
• Assist Accounts Dept in ad-hoc tasks as may be assigned.
• Review and approve WIP
• Analyse, prepare, explain, and submit Flash report to Directors/Shareholders
• Liaising with all auditors and tax agents

Requirements :-

• Degree/Diploma in Accountancy or equivalent professional qualification
• Minimum 5 years working experience in accounting, audit and/or handling group consolidation.
• Experience in ERP system implementation is a plus.
• Worked in accounting firm wuth an audit background is a plus.
• Ability to work independently with minimum supervision

*Only shortlisted candidates would be notified**

Roles & Responsibilities:

• Work with project teams on drawings and documents for issue and filing.
• Develop and collaborate in Building Information Modelling (BIM) using Revit software, generate and edit AutoCAD 2D Mechanical and Electrical (M&E) engineering drawings for submission, adhering to established specifications and standards.
• Assist in engineering related documentation/ administration and any other duties as assigned from time to time.

Requirements:

• Diploma or Technical Certicate (ITE-NTC2) in Mechanical or Electrical Engineering or equivalent.
• At least 1 year's working experience in drafting using AutoCAD and BIM/ Revit software.
• Familiarity with standard M&E installation details and requirements.
• Able to work independently as well as in a team.
• Good organizational, problem solving and communication skills.
• Training provided for fresh graduates with no experience.

Diploma/Bachelor Degree in Civil, Mechanical, Electrical and Electronic Engineering,science

Minimum 10-15years

Knowledge in AutoCad, MS office & MS project

Knowledge in material procurement

Knowledge in quantity take off

Able to handle the contractual matter

Able to handle the sub-contractors and vendors

Knowledge in safety standards

Good communication skils and writting skills

Experience in process industry like pharmaceutical, oil and petrochemical

Coordination with BMS Supplier, Electrical and HVAC Sub Contractors

Managing safety requirement on site

1. Perform daily machine startup and shutdown procedures on CNC cutting equipment. 2. Stage raw materials at each work-center for the day’s production. 3. Load and unload machines. 4. Maintain daily dust collector service and associated logbook in assigned area and report equipment deficiencies. 5. Ensure production schedule follow through as allocated by the scheduling department. 6. Assist in loading and unloading team members’ machines when production requires additional manpower to maintain throughput. 7. Perform minor maintenance and cleaning of cutting equipment and work area in accordance with company standards and manufactures machine recommendations. 8. Perform some machine alignment procedures and optic cleaning to keep equipment at peak operating performance. 9. Facilitate work-order paper flow in accordance with TS/ISO quality standards. 10. Check parts on other cutting centers per TS/ISO standards if required. 11. Monitoring assist and resonator gas levels and recommend supply requirements for daily production. 12. Other duties assigned by Lead/Supervisor or Management. 13. Adherence to attendance policy (regular attendance)

• 
  
• Dealing with email enquiries
• General office management such as ordering stationary
• Organising travel and accommodation for staff and workers
• Possibly maintaining the company accounts
• Managing the recruitment and work pass process, insurances, dormitory arrangement.
• Ensure timely preparation and accuracy of monthly payroll, CPF submission and Income Tax clearance
• Support current and future business needs, ensure legal compliance throughout manpower management
• Work closely with the General Manager to monitor day to day businesses and able to handle tasks assigned by the GM.

• Prepare and sort documents, keep record of completed work
• Provided routine office supports such as making copies, faxing, answering phones, prepares correspondence for mailing delivering and picking up correspondence.
• Update and maintain employee and department directories
• Respond to clients’ inquiries in a timely and professional manner
• Ordering of pantry and stationery supplies
• Handle enquiries
• To cover Receptionist duties as when required
• Any other ad hoc duties assigned