Driver Responsibilities:

• Loading, transporting, and delivering goods in a safe, timely manner.
• Adhering to assigned routes and following time schedules.
• Abiding by all transportation laws and maintaining a safe driving record.
• Must have a good experience in driving

Driver Requirements:

• Singapore class 4 driving license.
• Prefer to have PSA pass and Hazmat course certificate
• Clean driving record.
• 5 year experience and above.
• Willingness to adhere to assigned routes, schedules, safety procedures, and transportation laws.
• Long working period: Monday - Saturday

Responsibilities:

• Daily incoming job inspection assigned by supervisor
• Preparing and filling QC Inspection Reports
• Report to Supervisor on quality issue on daily inspection
• Able to use profile projector, micrometer & vernier caliper
• Maintain all inspection equipment, gages, machine maintenance and area cleaning
• Perform any other duties assigned by supervisor

Job Requirement:

• Minimum 2-5 years of experience in production/ manufacturing process planning
• Minimum Diploma in Mechanical Engineering
• Able to interpret technical drawing and computer literate
• Good communication and problem solving skills
• 
  

** Feel free to contact 6749 9386 if you interested!

1.Removes, applies and repair ceramic tile and other similar solid materials to floors, walls and ceilings

2.Compliance with materials / workmanship schedules

3.Lay bricks or blocks

4.Mix and apply glues, cements and grouts

Prepare cement floors, sidewalks, stairs and curbing

5.Install grout for new and existing door jamb

6.Apply non skid surfaces, safety strips

7.Prep flooring surfaces for floor coverings

8.Preparing and mixing different types of raw materials to get the plaster ready

9.· Hanging pictures, paper towel holders, sharps dispensers, soap dispensers

10.Preparatory to painting, make repairs in plaster, sheetrock, and masonry surfaces

11.Repair plaster,Lay brick and block.

12.Removal or make arrangements for the removal of waste/debris on a daily basis and upon the completion of any works

1. Must have class 4 licence

2. Must have 2 years driving experience in singapore

3. Have to maintain the vehicle clean and good condition.

4. Driving clients daily to their desired destinations

5. Adjust the route to avoid heavy traffic or road constructions, as needed

6. Using navigation apps to determine the best route

1. Must have class 4 licence

2. Must have 2 year driving experience in singapore

3. Have to maintain the vehicle clean and good condition.

4. Driving clients daily to their desired destinations

5. Adjust the route to avoid heavy traffic or road constructions, as needed

6. Using navigation apps to determine the best route

Cost Estimation .Invoicing . Project Management . Budget Planning .Construction Schedule and Planning .Communicate with different Disciplines .Problem-solving .Generating Job Packs and Test Packages .Creating Work Method of Statements c/w Risk Assessment. Developing Strategies to improve Company performance,Provide supports to execute MOC (Management of Change) jobs, shutdown job, revamping and turnaround job and to ensure job is executed as Exxonmobil standard and specifications.

Developing Work method of statement, Job safety analysis, Risk Assessment.

Prepare and develop Job packs, Loop folders, test packages, red line mark ups and as-builting.

Prepare and procure materials. Prepare and submit material approval to client.

Review and verify Construction drawings, generates engineering query, field instructions.

Process and Construction and Management @ Jurong Island Field work.

Responsible for the electrical and control system.

· Familiar with IEC, ISO & related E&I codes.

· Comfortable in reading and understanding of project specifications.

· P&ID understanding in cable installation, instrumentlocation/routine, cable schedule, cable termination drawings andcalculation

· Handson experience with LV Motor Control Center, Local ControlPanel, Local Control Station, Junction Box, RIO Panel, Fibre opticinterface panel (Fibre optic panel), Field fibre optic termination panel(Fibre optic panel) and UPS Distribution Box.

. Familiar with fire detection, emergency shudown sytem, HVACsystem.

· Familiar with Single Line Diagram, Load List, Motor Datasheet, PanelHeat dissipation, Power Cable & Ladder/Conduit Routing, CableLadder & Accessories BOM.

· Testing and commissioning of MCC and control panel.

· Proficient with the testing procedures and applicable rules andregulations of regulatory bodies

· Coordinate with all sections for testing/ commissioningrequirements with different stakeholders and arrange for facilitiesand instruments for the project.

· Able to work with different nationalities within the core team.

· PLC programming (added advantage).

· Perform any other duties as assigned by supervisor.

Experience & Certifications

· Minimum ITI

· Preferably with at least 10-15 years’ of experiences in electrical andcontrol instrumentation.

· Demonstrate experience in troubleshooting and problem solving inthe Electrical and Instrumentation area.

· Strong experience and ability to read and interpret electricaldrawings, single line, schematics, and specifications.

· Ability to interact effectively and positively with all levels ofpersonnel, customers, vendors and visitors.

· Proficient with MS Office and related Engineering Software (such asAutoCAD, Naviswork & programming software).

· Proficient in English language, both oral and written.

· Ability to work well both independently and as a team.

Your Role:

- Receive, store and issue machine tools from/to operators

- Responsible for Tool Inventory management (monitoring and request to order cutters/tools/holder), storage of jig & fixtures

- Upkeep and maintenance of tools

- Tool balancing (calibration)

Requirements:

- CNC Machining background

- Knowledge of tooling and cutter used in precision machining

- Knowledge in interpreting basic mechanical drawing

- Basic MS Excel knowledge

• Provide advanced manufacturing electrical and controls expertise in leading detailed and comprehensive planning for conceptualization, specification, development and implementation of right-sized manufacturing and facility equipment.
• Manage electrical and control portions of capital equipment expenditures that support new product designs, factory capacity or efficiency additions.
• Manage multiple projects and/or provide leadership for larger equipment control projects.
• Must be able to analyse needs and determine best electrical & instrumentations recommendations for equipment / process to optimize cost & performance.
• Able to select the right-sized equipment, workstation design, material presentation, standard work and single piece flow. Use data and statistics to characterize delivered manufacturing process capabilities in qualifying the release of processes and equipment
• Able to design panel (HMI, PLC, RIO) and provide line drawing according to client needs.
• Able to perform IQ/OQ test during commissioning.
• Able to perform costing base on selected instrument or given drawing.
• Automation knowledge.
• Identify and resolve operational problems and minimise delays.
• Select, guide and develop a team of project member with operational responsibilities to ensure that the organisation achieves it business objectives and complies with all relevant regulations and laws.
• Ensure that organisation and government standards on safety are met.
• Ensure that customer quality specifications are constantly met.
• Allocate capital and human resources to maximise productivity.
• Supervise and implement project expense, other assets and resource within budget.
• Provide guidance to junior and perform any tasks or duties as assigned by Management.
• You will oversee the safety and job/project operation.
• Ensure job completed and hand over on schedule.
• You will be attending safety or projects meeting.

• Assisting Accounts Dept. in AR & AP, Balance sheet, and P&L functions.
• Co-ordinate in Processing AP payments & SOA reconciliation of Supplier.
• Checking & Providing each Project Profitability report to Management.
• Assisting & Preparation of payment plan for day-to-day payables.
• Review of Cash advances paid to project personnel.
• Review of AP payable and providing report to Management.
• Handle the Petty Cash, GST, IRAS submission, and employee income tax calculations.
• Input all transaction details into the accounting system.
• Handle day-to-day accounting and finance operations
• Process reconciliations of inter-company transactions
• Handling full sets of accounts and assisting in month-end closing
• Maintain/Update daily cash book and perform daily/monthly bank reconciliations
• Administer all standing instructions and GIRO deductions
• Assist in the preparation of management reports
• Verify and process vendor's invoices in Company ERP software
• Responsible for accounts data entries and functions
• Validate and process expense claims for petty cash payments
• Coordinate with Auditors for Corporate Tax, ECI, etc.
• Provide support in year-end audit activities.
• Any other ad-hoc duties assigned by the Supervisor or Management

Responsibilities

• Support the Site Manager on all site administrative works
• Coordinate with document controller on design deliverables transaction to ensure smooth flow of documents.
• Maintain document archiving system for hardcopies and e-filing into server.
• Oversee the day-to-day admin functions of the department.
• Perform any other ad-hoc duties as requested or assigned

Requirements

• Diploma/Bachelor degree in Project Management, Engineering, Business Administration or related field
• Minimum 2 years of experience in similar capacity
• Proficient in Microsoft Office
• 5.5 work day
• Site Location: Changi

Maintain budgets and adjust according to needs as they arise.

Track performance and analyse the completion of key goals.

Document and report project progress to stakeholders and clients.

Problem solving skills with for to manage the pressurised situations.

Coordination and good communication with our own team for project support and sharing experience.

Field Engineer - Job Summary

A Field Engineer is responsible for overseeing and managing engineering projects at construction or operational sites. They ensure that the work is executed according to plans, specifications, and safety standards. This role combines technical skills with hands-on fieldwork to address real-time issues during construction, installation, and testing.

Key Responsibilities:

• Project Supervision: Oversee construction or installation processes, ensuring work meets project specifications and quality standards.
• Site Inspections: Conduct regular site inspections to monitor progress, identify issues, and ensure safety protocols are followed.
• Coordination: Work closely with contractors, engineers, and other stakeholders to ensure efficient execution of the project.
• Documentation: Maintain detailed records of work progress, site conditions, and any deviations from the original plans.

Skills & Qualifications:

• A Bachelor's degree or Diploma in Civil Engineering, Mechanical Engineering, Electrical Engineering, or related fields.
• Fresh graduates are welcome to apply, with on-the-job training and mentorship opportunities.
• Strong problem-solving, communication, and organizational skills.
• Ability to work in field environments
• Able to work under pressure.

Job Description: Admin Executive (Bilingual, HR & Administration Focus)

We are looking for a dedicated Admin Executive to handle a variety of office administration duties, with a focus on supporting HR operations, managing staff-related tasks, and ensuring compliance with company policies.

Roles & Responsibilities:

1. General Administrative Support: Perform data entry, maintain databases, and assist with other computer-related tasks.
   Handle phone calls and correspondence, including e-mails and letters.
   Assist in preparing and managing invoicing tasks.
   Supervise and support staff operations, including planning, organizing, and implementing administrative systems.
   Coordinate daily office activities to ensure efficiency and compliance with company policies.
   Undertake any other tasks assigned by management.
   
2. HR Support: Assist in time sheet checking and coordinate with the HR team on staff-related matters.
   Maintain and update time attendance and leave records for employees.
   Submit reports related to absenteeism, leave requests, and other HR metrics.
   Handle administrative support for Chinese-speaking employees, including translating documents and facilitating communication.
   
3. Facilities & Operations Support: Act as a point of contact for facilities-related inquiries.
   Collaborate with facilities management, vendors, and contractors to ensure timely and effective resolution of maintenance and repair issues.
   Compile and coordinate maintenance activities, repairs, and service requests.
   
4. Document Management & Compliance: Maintain and organize office documents, records, and any other administrative paperwork required by management.
   Ensure adherence to company policies and compliance with regulatory standards.
   

Requirements:

• Minimum Education: Diploma or O-Level, Nitec, or equivalent.
• Experience: At least 2 years of experience in a related administrative role with Construction company.
• Communication Skills: Strong written and verbal communication skills in English and Mandarin (preference).
• Computer Proficiency: Strong proficiency in Microsoft Office applications.
• Personal Attributes:Responsible, diplomatic, and a proactive self-starter with a "can-do" attitude.
  Strong organizational skills and ability to multi-task effectively.
  Meticulous, detail-oriented, and able to prioritize tasks efficiently.
  Confident and comfortable handling communication at all levels.
  

Work Conditions:

• Work Week: 5.5 days per week.
• Job Location: To be confirmed based on company needs.

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Prepare import/export documents
• Coordinate with vendors/customers for delivery arrangements
• Work with logistics partners to ensure timely and accurate shipments
• Ensure shipment documents comply with customs regulations
• Ensure timely invoicing of shipments as per company KPIs
• Maintain accurate and up-to-date shipping records
• Monitor production schedules and release work orders to meet shipment deadlines
• Prepare and review quotes based on customer requests
• Review contracts to ensure consistency with quotes
• Support purchase order generation, order confirmation, and delivery

Requirements:

• Minimum GCE O level
• Minimum of 1 years of work experience as Administrator
• Preferred with knowledge of SAP
• Must be detail-oriented and strong organizational skills
• Competence with Microsoft Office
• Good personality and able to handle customer queries

1. Design and Development:

• Conceptualize, design, and develop mechanical components and systems for Maxiton's refuse compactors and related equipment.
• Conduct structural and functional analysis to ensure designs meet performance, safety, and regulatory standards.
• Collaborate with cross-functional teams (electrical, software, and manufacturing) to integrate smart technologies into mechanical systems.

2. Prototyping and Testing:

• Create and refine prototypes, ensuring alignment with technical specifications.
• Plan and execute testing protocols for durability, efficiency, and safety of mechanical systems.
• Analyze test data and implement design improvements to optimize product performance.

3. Manufacturing Support:

• Provide technical expertise to production teams to ensure seamless manufacturing processes.
• Develop and maintain detailed engineering documentation, including CAD models, drawings, and BOMs.
• Identify and resolve design-related manufacturing issues promptly.

4. Maintenance and Troubleshooting:

• Assist after-sales and customer service teams in diagnosing and resolving mechanical issues in the field.
• Recommend and implement design updates to improve reliability and reduce maintenance requirements.

5. Innovation and Research:

• Stay updated on industry trends, materials, and technologies to enhance product offerings.
• Contribute to the development of next-generation solutions, such as energy-efficient systems and IoT-enabled equipment.

Qualifications:

• Education: Bachelor's degree in Mechanical Engineering or related field.
• Experience: 2+ years in mechanical design, preferably in waste management, heavy equipment, or hydraulics.
• Technical Skills:Proficient in CAD software (e.g., SolidWorks, AutoCAD).
  Strong understanding of hydraulics, structural mechanics, and material properties.
  Familiarity with IoT or sensor integration is an advantage.
  
• Soft Skills: Excellent problem-solving, communication, and project management skills.

Executives direct, plan, and coordinate operational activities for their organization or company and are generally responsible for creating the policies and strategies that meet company goals.

The phrase “executive function” refers to a set of skills. These skills underlie the capacity to plan ahead and meet goals, display self-control, follow multiple-step directions even when interrupted, and stay focused despite distractions, among others.

Executive function refers to mental processes (executive functioning skills) that help you set and carry out goals. You use these skills to solve problems, make plans and manage emotions. Research suggests strong executive functioning skills make a difference in your mental and physical health and quality of life.

The responsibilities of functional managers are to organize and conduct performance reviews, hire new people to the team, ensure the right skill set within a team, delegate and distribute tasks between team members

Executive function is a set of mental skills. It includes working memory, flexible thinking, and self-control. We use these skills every day to learn, work, and manage daily life. Trouble with executive function can make it hard to focus, follow directions, and handle emotions, among other things.

QSs estimate the cost of materials and labor, and monitor costs throughout the project.

Set budgets for payments, materials, and inventory, and ensure the project stays within budget.

prepare tender and contract documents, and prepare insurance replacement estimates.

identify and assess commercial risks, and advise clients on improvements and strategies.

work with clients to understand their needs, and act as a liaison between clients and site managers

Roles & Responsibilities:

• Process daily accounting transactions
• Process & verify invoices & payments
• Handle Account Receivable & Payables matters and accounting reconciliation
• Prepare monthly financial reports for management reporting
• Data entry including keying receipt vouchers to the accounting system
• Verification of accounting document and data entry into accounting system
• Assist in monthly closing and GST report submission
• Handle and ensure compliance with all finance filing requirements, audits, and tax filings
• Liaise with external/internal auditors and tax agents as required
• Adhere to accounting and financial procedures, systems and compliance with accounting standards and financial policies

Key Responsibilities:

• Prepare and produce 2D and 3D drawings using AutoCAD
• Develop layout plans, elevations, sections, details and perspective drawings
• Liaise with site supervisor and technical coordinator for any drawings changes and amendment
• Liaise with Main Contractor for shop drawing submission
• Amend drawings to be used for site construction
  

Requirements:

• Minimum diploma in architectural, engineering or construction related background
• Minimum of 2 years hands-on experience on AutoCAD
• Proficiency in BIM software is preferred
• Proficiency with MS Office application
• Experience in steel, aluminium and metal works industry is preferred

Key Responsibilities:

• Prepare contract documents, taking off quantities, providing cost and managing cost
• Prepare tender document, calling quotations and evaluate tender submissions
• Prepare quotations, and following up with Contractors
• Prepare monthly progress claims and certification of subcontractor's claim

Requirements:

• Minimum diploma in building, quantity surveying or construction related background
• Minimum of 2 years experience in Building Sector
• Proficiency with MS Office application
• Experience in steel, aluminium and metal works industry is preferred

Duties

• Create CNC programs, plan tooling & fixture for Mill & Turn machining
• Generate routing processes in ERP system
• Estimate machining cycle time each routing processes
• Perform technical planning and specification of the production process
• Production schedule, loading & capacity
• Liaise with customers for technical and specification require
• Establish PMP (Process Management Plan) as per customer requirements
• Analyze existing capacity & resources and propose for optimizing utilization
• Technical support for daily manufacturing process including design jig & fixtures
• Review existing processes and establish the best machining processes
• Propose new ideas for continuous improvement

Requirements

• Min. 3 years experience in a manufacturing environment, preferably in precision Engineering
• Advanced/Higher/Graduate Diploma/Post Graduate Diploma in Mechanical /Manufacturing Engineering field preferred
• Strong in technical skill and able to read mechanical drawing
• Possess knowledge of CNC & CAD programming, Solidwork/Solidcam, Gibbscam or Acam
• In-depth knowledge of machining processes
• Efficient in Microsoft Office
• Able to work independently and as a team
• Handles multi-tasking and stress well

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.