• The preparation of the companies QA manual control and supervision of all amendments and revisions
• Control and the distribution of all the companies quality documentation
• Monitor all quality related activities on the project
• Perform all internal and external audits on behalf of the companies management
• Verify contractor quality requirements are specified to vendors and contractor documentation submittals.
• Attend all pre-bid meetings and coordinate all project requirements with the project bidders.
• Attend client quality management meetings
• The preparation and control of project quality system management documentation prior to project commencement.
• Review quality inspection personnel qualifications and training requirements
• Monitor the disposition of all issued nonconformance reports.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.

• Provides assistance to shipyard team and foremen
• Develops departmental plans, including production and/or organizational priorities
• Directs activities in areas of safety and personnel, production, scheduling, material handling and quality and ensures compliance with all Safety, Quality, Company and Regulatory directives
• Review and interpret designs, drawings & specifications
• Directs and coordinates shipyard operations within company policies and procedures
• Responsible for providing the quantity and quality of workers to meet schedule
• Directs all phases of steel fabrication, assembly and erection, piping fabrication and installation, outfitting
• Monitors the performance of assigned supervisors
• Maintains appropriate interface and relations with customers, paying detailed attention to site requirements
• Translates company strategies into tactical plans. Creates and prioritizes necessary resources and steps required to accomplish goals on time
• Establishes all shift production schedules
• Establishes and maintains shipyard production goals to ensure production schedules are met
• Schedules and conducts meetings in conjunction with Manager and Workforce
• Ensures product quality control goals are met
• Maintains a clean and safe work site

Senior Supervisor Responsibilities:

• Making sure employees that report to you meet performance expectations.
• Giving instructions or orders to subordinate employees.
• Ensuring that the work environment is safe, secure and healthy.
• Meeting deadlines.
• Approving work hours.
• Ensure great customer service at all levels.
• Helping the team understand performance targets and goals
• Training or ensuring that workers are properly trained for their specific roles
• Scheduling work hours and shifts
• Coordinating job rotation and cross-training
• Sharing company updates, financial results, and new objectives with team members
• Assisting in resolving emergencies, such as a quality or customer problem that might be escalated to the team supervisor for handling

Senior Supervisor Requirements:

• Previous leadership experience.
• Excellent communication skills.
• Eye for detail and accuracy.
• Reliable, with high integrity and strong work ethic.
• Ability to work as part of a team.
• Professional appearance and attitude.
• Computer literacy.
• Proactive organizational skills.
• High school diploma.
• Ability to keep a positive attitude in a fast-paced environment.

• Reports to Safety Manager
• Implement, monitor & improvise site safety management system
• Support management in safety-related matters
• Ensuring compliance with regulatory and corporate HSE policy and requirements by conducting regular inspection and internal audits
• Proactive to lead incident investigation, address the control measures, and ensure that all incident reports are made in a timely manner.
• Oversee all general activities concerning HSE and Implementation of Health, Safety, and Environment (HSE) rules, regulations, and procedures of the company.
• Ensure that relevant HSE documents, reports, communications, and other requirements of HSE are kept properly in place.
• Ensure HSE complies with ISO
• Compile reports and presentation slides for management reporting

Job requirements:

• Minimum a Diploma in Workplace, Safety & Health or equivalent
• Attained MOM WSHO license
• Proficient in MS office, IT savvy (Google forms etc)
• Minimum 3 years post-registration & relevant practical experience in a similar role with LTA projects is mandatory for this position
• Experience in Civil road works and heavy lifting matters
• Location: Woodlands
• Project: LTA Viaducts

• Reports to Utility Manager
• Coordination between sub-contractors and construction team on excavation works, services diversion, and reinstatement works.
• Provide update of the progress of works in the construction site.
• Supervise subcontractors’ works as per work plan, timeframe, and as per required quality standard of work output.
• Monitor utilities and M&E work executed are in accordance to statutory requirements, construction procedures, and safe work practices.
• Assist other Engineers in preparing the programming of works, scheduling, and monitoring the progress plan.
• Any related works as assigned by superior

Job requirements:

• Bachelor’s Degree in Civil Engineering or equivalent
• Minimum of 2 years’ relevant experiences as Utility Engineer
• Candidate with relevant LTA infrastructure project experience is an advantage
• Knowledgeable with various Utilities, M&E works
• Self-motivated, independent individual and possesses great initiative
• Good interpersonal skills
• Proficiency in using Microsoft Office and Auto CAD is an advantage
• Location: Woodlands
• Project: Viaducts

Responsibilities:

• Manage and organize project documentation, records, and correspondence.
• Prepare reports, presentations, and meeting agendas.
• Handle general office administration tasks, such as ordering supplies and maintaining filing systems.
• Assist in scheduling and coordinating meetings, site visits, and project milestones.
• Record and distribute meeting minutes and follow up on action items.
• Support the team in tracking project timelines and deliverables.
• Act as the point of contact for internal and external stakeholders regarding administrative matters.
• Coordinate with vendors, consultants, and contractors to ensure seamless communication and documentation.
• Facilitate the flow of information between project team members.
• Process invoices, expense claims, and purchase orders related to project operations.
• Monitor and track project-related expenditures and maintain financial records.
• Manage calendars and appointments for team members.
• Ensure compliance with company policies and procedures in all administrative activities.
• Provide ad-hoc support as required by the project or management team.

Requirements:

• Diploma with 3-5 years of relevant working experience.
• Proficient in MS Office (Excel/Words/PowerPoint)
• Good communication and organizational skills
• Highly self-motivated, good working attitude and a good team player
• Independent with the ability to work with minimum supervision.

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Responsibilities:

• Operate 4-5 axis CNC Vertical Milling Machines and Horizontal Boring Machines.
• Set up machines accurately, including tooling, fixtures, and workpieces, based on engineering drawings and job specifications.
• Keep up with the housekeeping requirements at the workstation.
• Carries out duties as assigned by Foreman.

Requirements:

• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre.
• Understanding of tooling criteria, machining applications and process documentation.
• Min ITE Technical Certificate, preferably in Precision Metal Machining.

Job Description

• To install, repair and maintain mechanical equipment both manually and with mechanical tools
• Fabricates parts and sub-assemblies of machinery and related mechanical equipment to drawing specifications, using bench fitting tools
• Dismantles, inspects and refits parts and reassembles mechanical equipment
• Assembles and installs new mechanical fixtures
• Follow strictly to Risk Assessment before work commencement
• Ensure personal safety and others
• Handle tools and equipment with care
• Co-ordinate with other processes for continuous work flow and smoother job completion within job schedule
• Maintain good housekeeping

Requirements:

• Relevant trade certificate or equivalent
• Related experience in mechanical/electrical works
• Able to speak and understand simple English
• Physical works required and able to carry heavy load
• Knowledge on how to use simple tools and principles of fitting
• General knowledge in basic marine/electrical fitting

Responsibilities:-

• Provide admin support to operation as well as quality control & safety/health dept
• Assist in administrative duties and other duties as assigned

Requirements:-

• Minimum Diploma or equivalent
• Possess 2 years of experience preferably in oil & gas industry will be an advantage
• Matured personality, dynamic, self-motivated and result-oriented
• Able to work independently with min supervision
• Positive attitude and good personality
• Proficient in MS Office

Job Description

- Ensuring the smooth day-to-day operation.

- To plan the job schedule for the workers and subcontractors.

- Monitor the progress of the job, record achievements and report to the manager.

- Troubleshoot any issues that occur on the construction site.

Requirements & Qualification

- Diploma / Degree in Engineering, Technical or Construction.

- Certifications in Project Management.

- Good planning, Leadership,and Problem solving.

• Report to Construction Manager
• Manage and oversee construction activities near existing SPPG tunnel/GTP
• Coordination between client, consultant and sub-contractor(vendors)
• Ensure compliance with safety procedure and regulations
• Carry-out regular inspections and regular checks of concerned construction activities
• Resolve technical and engineering issue
• Ensure proper documentation (including Risk assessment/Method statement) and record-keeping of construction activities
• Ensure the activities comply with the local Authorities’ quality, environment, health & safety requirements and Clients’ General Specification
• Ensuring Permit to Work (PTW) is verified and valid for assigned duties.

Job Requirements:

• Degree in Civil Engineering from a recognized university, accredited by the Singapore PE Board
• Registered Resident Engineer with IES and valid certification in Singapore (Mandatory)
• Minimum of 1 year of Engineering experience
• 2 years of experience in the supervision of construction projects preferred
• Progress oriented, team player
• Technical expertise and knowledge in Civil Engineering Construction especially piling/RC works
• Proficient in Microsoft Offic and Auto CAD
• Attained CSCPM/BCSS/Confined space/Work At Height
• Good interpersonal skills and hardworking
• Location : Woodlands
• Project : Viaducts

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Scope:

• Responsible for all cleaning in and around office buildings.
• Cleans floors and toilets
• Sweeping, dusting and clearing of rubbish
• Spot cleaning glass and windows.
• Any ad-hoc cleaning duties as assigned

Job Requirements

• Physically fit and able to perform heavy cleaning duties like sweeping, mopping and so on.

Board Roles and Director Duties

Board’s Role

The Board’s role is to:

1. provide entrepreneurial leadership, and set strategic objectives, which should include appropriate focus on value creation, innovation and sustainability;
2. ensure that the necessary resources are in place for the company to meet its strategic objectives;
3. establish and maintain a sound risk management framework to effectively monitor and manage risks, and to achieve an appropriate balance between risks and company performance;
4. constructively challenge Management and review its performance;
5. instil an ethical corporate culture and ensure that the company’s values, standards, policies and practices are consistent with the culture; and
6. ensure transparency and accountability to key stakeholder groups.

Scope of Director Duties

Directors should be aware of their duties at law, which includes acting in good faith and the best interests of the company; exercising due care, skills and diligence; and avoiding conflicts of interest. Directors should also put in place policies, structures and mechanisms to ensure compliance with legislative and regulatory requirements, establish appropriate tone-at-the-top, desired organisational culture and standards of ethical behaviour.

While the duties imposed by law are the same for all directors, a listed Board will generally have different classes of directors (executive, non-executive and independent directors) with different roles:

• Executive Directors (EDs) are usually members of senior management, and involved in the day-to-day running of the business. Executive directors are expected to:

1. provide insights on the company’s day-to-day operations, as appropriate;
2. provide Management’s views without undermining management accountability to the Board; and
3. collaborate closely with non-executive directors for the long term success of the company.

• Reports to Subcontracts Manager
• Quantity Survey for Subcontract Works (Civil)
• Prepare the tender document for new subcontract bidding
• Review of Subcontractor’s proposal
• Make a Subcontract Agreement
• Review Subcontractor’s payment claim and prepare payment response
• Budgetary review of Subcontractor’s claim issue
• Manage Subcontract issues from time to time
• Focus on site issues for site progression

Job requirements:

• Degree in Quantity Surveying / Civil Engineering or Equivalent
• Minimum 3 years of working experience in quantity surveying
• Strong communication & negotiation skills
• Proficient in MS Office
• Self-motivated and good leadership
• Location: Woodlands
• Project: Viaducts

Responsibilities

• Must have experience in aluminium & Glass industry work
• Able to work independently with Main Contractor, Architect to resolve site issues
• Prepare tender submission;handle progress claims and progress payment, VO & finalization of accounts
• To attend site meeting whenever is required
• Materials ordering for sites.
• Any ad-hoc duties assign.
• Estimate the overall cost of the project

Requirements:

• Degree/ Diploma in Building/Quantity Surveying
• At least 5 years QS experience in alum windows & doors
• Meticulous, Independent with good communication skills
• Proficient in AutoCAD and Microsoft Office programs (Excel, Word, e.g.)
• Familar with alum profiles
• Able to work under pressure and tight deadline;

Responsibilities:

• Manages and coordinates a team of drafting and detailing engineers, cost estimators, fabrication and project team

• Ensures proper planning and execution of projects to meet or exceed performance indicators in terms of quality and timeframe

• Oversees the planning of project operations and resolves technical and scheduling issues on-site

• Main point of contact and liaison between project teams and the client's representatives, consultants, and relevant authorities

• Review contract, design drawings, specifications, and bid documents

• Implement effective contract and claim management to increase the contractual margin and protect the Company against liability claims

• Site visits to review the progress of your job

• Monitor compliance of work with workplace safety and health regulations

• This job description is not all-inclusive and may include other duties as assigned

• Candidates should be able to manage multiple projects of various sizes and levels of complexity.

Requirements

• Minimum 5 years of Project Management experience.

• Diploma or equivalent Bachelor's Degree in Construction Management, Structural/Civil Engineering

• Experience with fabrication and installation of structural steel and miscellaneous metals

• Strong analytical, written, and verbal skills.

• Strong computer skills, including AutoCAD, Microsoft Office Suite Project setup

Kindly provide your expected salary, last drawn salary, and reason for leaving in your CV/Resume

Job Description

1. Assist the Project Manager with preparation of overall cost and progress reports and other matters related to schedules, cost and materials.

2. Assists the Project Manager and supervise Document Controller to implement systematic document control and filing procedures.

3. Liaise and coordinate with Engineering and Procurement Departments for preparation of monthly progress reports prior to Project Manager’s approval.

4. Coordinate with the Construction department leaders on progress monitoring and recording.

5. Prepare and record change proposals for the contract between Contractor and Client.

6. Assist PM organize tender activities and coordinate in disciplines, vendors for tender preparations

Requirements:

Diploma/Bachelor's degree in any discipline of Engineering

Fresh graduates are welcome to apply

Responsibilities

• Familiar with evaluation of tender preparation of tender & quotation
• Responsible to taking off measurement & monthly progress claim
• Carry out quantity take-off for tendering of project
• Ability to source for supplies and sub-contractors for quotation for tendering
• Evaluation and certification of sub-contractors progress payment
• Project administration and documentation include preparation of interim
• Carry out miscellaneous tasks required
• Other quantity surveyor duties as assigned

Requirements

• Degree/Diploma in Structure & Civil Engineering
• Min 3 years working experience
• Ability to show initiative and work autonomously
• A positive attitude and an assertive approach
• Develope a Risk Management Implemention Plane

Authorities and Responsibilities

1. To organize, co-ordinate, check and ensure all production activities follow as plan.
2. Calculate machine cycle time and organize production schedule base on machine capacity and capabilities
3. Plan manpower resources and delegate machining job to machinist
4. Verify program issue to workshop
5. Analyze and provide solution to solve problems between programmer and production dept.
6. Analyze monthly machining and scrap report
7. Good supervisory skill, people skill and 5 ‘S’ housekeeping
8. Good writing and communicating skill
9. Good in mechanical process, such as machining process, H/T, jig and fixture etc.

Competence Requirements

• Preferred NTC 2 / Diploma in Engineering discipline or equivalent.
• Minimum 3 years of working in related industry, and having 2 – 3 years of supervisory experience and preferably with working knowledge in machining processes.
• PC literate
• Possess excellent interpersonal communication skills and is an effective team player who is also self driven with a strong achievement orientation.

We are seeking a skilled Observability Engineer with at least 2-3 years of experience in observability to join our dynamic team. In this role, you will be responsible for implementing, managing, and optimizing observability tools. You will work closely with cross-functional teams to ensure that our systems are monitored effectively, and issues are identified and resolved proactively.

Key Responsibilities:

• Design, implement, and maintain observability frameworks using tools such as Prometheus, Grafana, ELK Stack, tableau or similar.
• Design, implement, and maintain Monitoring tools such as BMC, CA, SolarWinds, SCOM, Dynatrace, Datadog or similar.
• Create and manage dashboards, visualizations, and reports to communicate system health and performance metrics.
• Collaborate with the sales team to understand client requirements and demonstrate how our observability solutions can address their specific needs.
• Prepare and deliver presentations, demos, and workshops to potential clients showcasing the capabilities and benefits of our observability tools.
• Troubleshoot and resolve tools-related issues in a timely manner.
• Assist in the training and mentoring of team members on observability and monitoring tools and practices.

Job Requirements:

• 2-3 years of experience in software development, Implementation, operations, or a related field with a focus on observability tools.
• Proficiency in implementing and managing observability tools.
• Solid understanding of cloud platforms (AWS, Azure, GCP) and containerization technologies (Docker, Kubernetes).
• Experience with scripting languages (Python, Bash, etc.) for automation tasks.
• Knowledge of best practices in monitoring, logging, and incident management.
• Strong analytical skills with the ability to diagnose issues and propose effective solutions.
• Excellent communication and collaboration skills, with a proactive approach to problem-solving.
• Technical experience in Enterprise Monitoring tools such as Dynatrace, Grafana, BMC,
• Knowledge of Automation tools, Cloud Technologies and DevOps Concepts, Open systems and Networking Technologies
• Good knowledge in various monitoring tools e.g. BMC, SolarWinds, CloudWatch and Azure.
• Experience with configuration management tools (Ansible, Terraform, etc.).
• Familiarity with APM (Application Performance Management) tools such as New Relic, Dynatrace, or similar.
• Understanding of network protocols and architectures.
• Experience with orchestration tools (e.g., BMC, Kubernetes, Apache Airflow, Jenkins) to create and manage automated workflows for deploying, monitoring, and scaling observability solutions.

Preferred Qualifications:

• Proficiency in observability tools (e.g., Grafana, ELK Stack, Datadog, Prometheus etc).
• Proficiency in ITOM tools (e.g., BMC, Dynatrace, CA, SCOM, IBM, SolarWinds etc).
• Strong understanding of monitoring and logging frameworks.
• Experience with distributed systems and microservices architecture
• Ability to write scripts for automation and data analysis.
• Experienced in cloud platforms (AWS, Azure, GCP) and their monitoring services.
• Experience with CI/CD pipelines and infrastructure as code (IaC) tools like Terraform or Ansible
• Relevant certifications in cloud computing, DevOps, or observability tools can be a plus.

Work location: Jurong East

Job Description

• Establish and maintain communications with internal stakeholder and client to ensure accurate and timely flow of the documentation deliverables.
• To manage all documents for the project
• Perform all works which include filing, typing, photocopying, fax and other works being assigned from time to time.
• Maintaining and updating the database
• Ensure all incoming and outgoing correspondences/drawings/documents/reports are organized according to Project Filing Code
• Receiving and checking all incoming correspondence
• Review each document for conformity and accuracy prior to submission to client.
• Keep all project documents orderly complete and categorized for easy accessibility to specific records and projects.
• Ensures delivery and receipt of all documents by deadlines.
• Makes sure that controlled copies of latest approved documents are given to the appropriate staffs.
• Maintains an updated records of all approved documents.

Requirement

• At least NITEC, Diploma, Advance Diploma in Engineering field.
• Must have the ability to communicate effectively with both technical and non-technical staff.
• Proficient in MS Office.

• Lead the team in executing electrical work during the construction phase, including cable tray installation, cable pulling, panel installation, cable termination, and testing/commissioning for MV/LV switchgear, transformers, UPS, DCIS/HMI, etc.
• Monitor and inspect construction activities to ensure compliance with design documents.
• Manage a team comprising supervisors, sub-contractors, and vendors.
• Responsible for electrical interfaces with the operational team, conducting meetings, and providing technical clarifications.
• Investigate and troubleshoot electrical switchgear faults or failures, implementing effective corrective and preventive actions.
• Analyze and enhance equipment reliability to prevent recurrence, collaborating with operation groups and external contractors.
• Prepare documentation for maintenance work, ensuring compliance with safety standards, and utilizing appropriate Method Statements and Risk Assessments, meeting BCA requirements.
• Collaborate cross-functionally to ensure systems, equipment, and rooms align with internal customers' needs.
• Review inspection and testing plans for electrical and instrument system installations through relevant checklists.
• Coordinate with stakeholders to ensure the smooth completion of projects.
• Ensuring each stage of the project happens on time, on budget and to a high standard.
• Liaising with staff at every level.
• Sharing regular progress report with top management team
• Working in an office or onsite.