1. Able to read and understand technical drawings.
2. Must able to do Mitutoyo CMM Programming and Operation.
3. Ensure incoming materials, in-process production and finished products meet by confirm specifications requirements; conducting visual and measurement tests.
4. Follow up corrective actions in production
5. Documents inspection results by completing reports and logs; inputting data into quality database.
6. Able to perform final inspection report for finished products and prepare relevant documents to customer.
7. Evaluate and analyze customers rejections, implement and feedback corrective action.

• At least 5 years' experience in Quality Control
• Basic Computer knowledge to prepare Quality Documents Report
• Able to speak, write and read simple English
• Able to work independently with minimum supervision

Nanyang Environment and Water Research Institute, NTU is looking for a Research Fellow with expertise in chemical reactors to develop an improved prototype for a thermocatalytic process.

The project is funded by National Environment Agency, Singapore to address one of the largest problems in waste management – the problem of plastic waste pollution. A significant fraction of plastic waste has substandard quality for mechanical and chemical recycling even after sorting and cleaning. The Research Fellow will work on the design, fabrication and testing of a chemical reactor system that will use pyrolysis-chemical vapor deposition (CVD) technology for converting these plastic waste streams (specifically, contaminated and rejected plastics) into multi-walled carbon nanotubes (MWCNTs) and hydrogen. The role of Research Fellow is to design a system prototype that can effectively mitigate the impact of impurities from diverse plastic waste streams on production outputs and can be operated in a continuous mode.

Key Responsibilities:

The candidate will be undertaking full research work and administrative duties during the term of employment within the following areas:

• Experimental work on plastic waste conversion into carbon nanotubes and hydrogen.
• Design, procurement, installation and operation of the prototype system;
• Investigation of system performance and determining factors that influence the yield and quality of outputs;
• Development of improvements in system design to mitigate the factors decreasing quality and yield of outputs;
• Development of a continuous process;
• Liaising with vendors regarding the feasibility of scale up and conducting a cost-benefit analysis.
• Publishing research papers and documenting developed intellectual property.
• Reporting the progress to stakeholders (internal and external).

Job Requirements:

• Ph.D. degree in a field relevant to chemical reactor engineering (e.g., Chemical Engineering, Thermal Engineering, Mechanical Engineering, Process Engineering or other).
• PhD thesis or postdoctoral experience related to chemical reactor engineering for at least one of the following areas: (a) catalytic reactors, (b) continuous reactors.
• First-author publications in the areas mentioned above.
• High proficiency in English (e.g., TOELF, IELTS, GRE) for preparation of research papers.
• Ability to prepare well-written technical reports and research papers.
• Ability to prepare decent quality presentation decks, figures and illustrations.
• Ability to build formal and informal partnerships and work collaboratively with others to meet shared objectives.
• Ability to consistently achieve results, even under challenging circumstances.

We regret to inform that only shortlisted candidates will be notified.

1) Carry out production, packaging and machine operation duties

2) Ensuring the smooth and efficient running of machines with target

3) Feed raw material or parts to machines

4) Inspect parts with precision and measuring tools

5) Keep records of approved and defective units or final products

6) Maintain activity logs

7) Maintain and clean machines periodically

8) Follow established safety rules and regulations

9) Perform any other assignments assign by HOD

1) Carry out production, packaging and machine operation duties

2) Ensuring the smooth and efficient running of machines with target

3) Feed raw material or parts to machines

4) Inspect parts with precision and measuring tools

5) Keep records of approved and defective units or final products

6) Maintain activity logs

7) Maintain and clean machines periodically

8) Follow established safety rules and regulations

9) Perform any other assignments assign by HOD

PM Group is an international project delivery company operating across Europe, the USA and Asia. We have a 43 year track record in project management, process design, facility design and construction management for leading multinational companies. We are now recruiting for Project, Process and Mechanical Engineer Intern in Singapore.

Job Summary

Project Engineer (intern)

• Support and assist the Project Managers in their duties and to carry out cost research and general department duties
• Develop and maintain collaborative relationships with our clients
• Have the opportunity to communicate with both internal and external stakeholders
• Learn on establishing project objectives in line with our clients and ensure goals and timelines are archieved
• Support in executing of projects via the PM Group Quality and Management systems
• Assist in projects technical and commercial delivery
• Train and learn to develop and implement appropriate project execution strategy(s) and maintain project budget
• Ensure compliance with local statutory and regulatory obligations

Process Engineer (Intern)

As a Chemical Engineering professional at PM Group, you will work as part of a multi-disciplined team on projects in the following sectors – Mission Critical, Pharma, Med Tech, Advanced Manufacturing, Food and Energy. Your work assignments will involve rotation through different projects, covering areas such as:

• Process Safety
• Process Plant Operation
• Process Optimization/Modelling
• Process Unit Operations
• Design Calculations
• Project Management

Mechanical Engineer (Intern)

• Prepare HVAC and Building Services basis of design documents
• Involve in equipment and personnel heat loads and generation of HVAC heat load calculations
• Coordinate with team members on preparing equipment list, schedules, datasheets and specifications for HVAC and Building Service equipment
• Learn & understand sub-contractor scopes of work for HVAC and Building Services

Office location: International Business Park (Jurong East)

Work arrangement: Hybrid - Work-From-Home & in office

Period: Jan to Mar/Apr 2025

1) Carry out production, packaging and machine operation duties

2) Ensuring the smooth and efficient running of machines with target

3) Feed raw material or parts to machines

4) Inspect parts with precision and measuring tools

5) Keep records of approved and defective units or final products

6) Maintain activity logs

7) Maintain and clean machines periodically

8) Follow established safety rules and regulations

9) Perform any other assignments assign by HOD

• Planning and scheduling: Estimating the time and materials needed to complete projects
• Leading and coordinating: Supervising and coordinating the work of electricians and technicians
• Installation and maintenance: Overseeing the installation, testing, and commissioning of electrical systems
• Safety and compliance: Ensuring that all electrical activities comply with safety standards and regulations
• Quality assurance: Inspecting and testing completed electrical work to ensure it meets project specifications
• Troubleshooting and problem-solving: Diagnosing and resolving issues in electrical systems and equipment.

• Provides supervision to shipyard team and foremen
• Develops departmental plans, including production and/or organizational priorities and establish shipyard fabrication activities
• Directs activities in areas of safety and personnel, production, scheduling, material handling and quality and ensures compliance with all Safety, Quality, Company and Regulatory directives in conjunction with Manager, HSSEQ
• Review and interpret designs, drawings & specifications, recommend changes to plans and specifications to meet actual vessel conditions
• Directs and coordinates shipyard operations within company policies and procedures
• Responsible and accountable for the performance of craft supervisors, technicians, and line staff for safety, quality and scheduling
• Responsible for providing the quantity and quality of workers to meet schedule With assistance of Senior Manager, trains assigned craft supervisors in safety, cost control, job skills, quality and scheduling
• Directs all phases of steel fabrication, assembly and erection, piping fabrication and installation, outfitting including the work performed by outside contractors
• Monitors the performance of assigned supervisors
• In conjunction with the Senior Manager, maintains appropriate interface and relations with customers, paying detailed attention to site requirements
• Translates company strategies into tactical plans. Creates and prioritizes necessary resources and steps required to accomplish goals on time
• Establishes all shift production schedules
• Establishes and maintains shipyard production goals to ensure production schedules are met
• Schedules and conducts shipyard meetings in conjunction with Manager and Workforce
• Ensures product quality control goals are met and maintained for shipyard
• Maintains a clean and safe work site

To ensure work is construct in accordance with contract and drawings.

Planning of Architectural Works and micro scheduling with other disciplines.

Liaise with main-contractors, suppliers, etc. Procurement and Monitoring of Architectural related materials.

*Coordinate, review and verify drawings including owner & maincontractor’s drawings to ensure compliance with design specifications and guidelines.

*Able to work in a fast-paced environment and both independently and in a team.

Requirements

*Experienced in AutoCAD 3D, and able to understand architectural or structural drawings

Roles & Responsibilities

Job Description

Provide accounting and clerical support to the accounting department

Type accurately, prepare and maintain accounting documents and records

Prepare Tax Invoices, cheques, bank deposits, general ledger postings and statements

Reconcile accounts in a timely manner

Daily enter / key data of financial transactions in database

Provide assistance and support to company personnel

Track and restore accounting or documentation problems and discrepancies

Prepare documentations (eg. billings/invoices, SOA & etc)

Liaising with clients and vendors when required

Ad-hoc duties assign by superior

Requirements

Knowledge of basic book-keeping procedures

Good math skills and the ability to spot numerial errors

Hands-on experience with MS Excel and accounting software

Ability to handle sensitive, confidential information

Perform daily accounting tasks and able to help department run smoothly

Relevant experiences will be added advantage

Able to work independently

Meticulous and well-organized

Has good communication and interpersonal skills

Interested candidates may send in their resume to: [email protected]

• Design: Create plans, blueprints, and models, and design systems like heating, ventilation, lighting, and air conditioning
• Review: Review and evaluate blueprints and designs, and identify and fix issues
• Analyze: Analyze structures to ensure they can withstand their intended use and environmental conditions
• Comply: Understand and comply with regulations and building codes
• Test: Ensure safety and test systems
• Monitor: Use computer-based software to design and monitor systems
• Collaborate: Work with architects, civil engineers, or construction crews to develop solutions to structural problems

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional, and related sectors.

With offices across Europe, Asia, and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for Recruitment/Sales Intern- Engineering Services-Pharma to join us on an Internship to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Build your network by engaging with candidates as a talent acqusition/recrtuiter
• Build and strengthen your network of candidates via cold calling, and face to face meetings
• Continually seek opportunities to increase customer satisfaction, driving continuous improvement initiatives.
• Build a network of clients to sell out outsourced technical solutions.
• Must be in the last semester of your studies as a full time job could be available for the right talent.

If you'd like to find out about this opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal-opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing on employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Job Description:

- Setting up and operate CNC machining center and CNC Lathe

- Carry out daily housekeeping in the work area after each work shift

- Responsible to work safely and comply with all the safety work procedures and practices

Job Requirements:

- Nitec in Mechanical Engineering or Precision Machining

- Able to understand and interpret of mechanical blue print

- Able to use of measuring instrument

Salary: $2400-$2800+allowances+OT=>$3300-$4000++

Industry: Engineering

Located at Tuas

Japanese MNC

Have AWS + Bonus + Yearly increment

Mon to Fri 3 rotating shift

Job Description

• Operate and monitor machinery on the assembly line to ensure smooth operation
• Conduct routine maintenance tasks on machinery as needed
• Identify and address any issues with machine operation
• Utilise mechanical and electrical knowledge to troubleshoot and repair production machines
• Conduct regular inspections to identify potential malfunctions and perform preventive maintenance

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Duties

• Manage daily productions and ensure efficiency of operations, including capacity planning, loading and optimization
• Monitor and day-to-day operations to ensure productivity by ERP system
• Planning and scheduling work deployments daily
• Communicate and report updates to Technical Director to review and support processes
• Development and oversight of staff appraisal and supervision systems
• Resolving performance issues among staff
• Handle customer concerns and resolving them immediately
• Ensure all machines are well maintained and coordinate servicing & repair with service team
• Develop operations-related plans, manufacturing budgets and policies & procedures to comply with ISO and AS standards.
• Review and propose new strategies to achieve better efficiency in production

Responsibilities

• Lead and direct business operations in alignment with company policies
• Manage plan changes, including internal and external communications, HR and related technical issues
• Oversee and drive the production team to meet company objectives and KPI.
• Reinforce internal policies, business planning, procedures and quality standards on all practices executed by staff
• Improve manufacturing capability, technologies and problem solving in conjunction with quality & engineering requirement
• Development of workforce plans including competency frameworks to meet operational requirements of organization
• Cultivate safeguarding against unexpected operational incidents that affect business continuity
• Undertake other tasks including administrative duties in connection with the post
• Perform ad-hoc duties as and when required
• Minimum 5 years of relevant experience in supervising in engineering production industry
• Experience in managing a workforce of 50 or more people preferred
• Advanced/Higher/Graduate Diploma/Post Graduate Diploma in Mechanical /Manufacturing Engineering field preferred
• Good interpersonal and communication skills in dealing with staff, clients and suppliers
• Efficient project management, problem solving & decision-making skills
• Takes initiative and is assertive/aggressive

Undertake a variety of projects, managing scope, cost, time, risk, resources, procurements, quality and communications in accordance with company policies, processes and procedures, whilst adhering to client contractual obligations. Regular client liaison will take place, managing expectations, and ensuring appropriate stakeholder satisfaction is apparent via pro-active management of project scope ensuring all milestones are met.

· Ensuring all assigned projects are administered in accordance with company’s Quality Management System and to agreed contractual obligations.

· Implementing projects according to contract terms, project goals and objectives, in a pro-active manner, including regular interface with all stakeholders such as clients, certifying authorities, contractors/suppliers and staff/personnel as necessary.

· Ensuring project definition is apparent, clarifying scope, estimates and assumptions with sales team during project handovers.

· Ensuring all appropriate projects are kicked off, their meetings are effective, congruent with the project scope and set the tone for success.

· Attendance to client meetings regarding appropriate project matters as and when required.

· Preparation of project plans in a timely manner.

· Creating and updating project schedules, ensuring critical path activities are understood and communicated.

· Ensuring project procurements are considered in terms of cost, time and quality.

· Understanding project commercial drivers and costs, controlling activities to limit adverse impact upon project finances.

· Preparation of documentation packs for workshop activities to enable efficient product realisation and mobilisation within time demands of the project, ensuring appropriate reviews take place with necessary personnel.

· Preparation of documentation packs for worksite execution (On/Offshore) ensuring appropriate reviews take place with necessary personnel including pre- and post-briefings.

· Ensuring the Design Engineering department is appraised of the project scope such that all engineering activities and calculations are carried out to verify the suitability of equipment

· Where contractually obliged, attendance offshore to assure project execution and fulfilment.

• Leading project planning sessions
• Coordinating staff and internal resources
• Managing project progress and adapt work as required
• Ensuring projects meet deadlines
• Managing relationships with clients and stakeholders
• Designing and signing off on contracts
• Overseeing all incoming and outgoing project documentation
• Participating in tender process i.e. design, submission and review
• Designing risk mitigation plan
• Conducting project review and creating detailed reports for executive staff
• Optimising and improving processes and the overall approach where necessary
• Securing growth opportunities and initiating new projects
• Managing large and diverse teams

• The preparation of the companies QA manual control and supervision of all amendments and revisions
• Control and the distribution of all the companies quality documentation
• Monitor all quality related activities on the project
• Perform all internal and external audits on behalf of the companies management
• Verify contractor quality requirements are specified to vendors and contractor documentation submittals.
• Attend all pre-bid meetings and coordinate all project requirements with the project bidders.
• Attend client quality management meetings
• The preparation and control of project quality system management documentation prior to project commencement.
• Review quality inspection personnel qualifications and training requirements
• Monitor the disposition of all issued nonconformance reports.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.

• Provides assistance to shipyard team and foremen
• Develops departmental plans, including production and/or organizational priorities
• Directs activities in areas of safety and personnel, production, scheduling, material handling and quality and ensures compliance with all Safety, Quality, Company and Regulatory directives
• Review and interpret designs, drawings & specifications
• Directs and coordinates shipyard operations within company policies and procedures
• Responsible for providing the quantity and quality of workers to meet schedule
• Directs all phases of steel fabrication, assembly and erection, piping fabrication and installation, outfitting
• Monitors the performance of assigned supervisors
• Maintains appropriate interface and relations with customers, paying detailed attention to site requirements
• Translates company strategies into tactical plans. Creates and prioritizes necessary resources and steps required to accomplish goals on time
• Establishes all shift production schedules
• Establishes and maintains shipyard production goals to ensure production schedules are met
• Schedules and conducts meetings in conjunction with Manager and Workforce
• Ensures product quality control goals are met
• Maintains a clean and safe work site

Job Descriptions:

· Responsible for day-day operations of the HR department for a group of companies

· Manage recruitment process: Posting job advertisement, screening resumes, conducting interviews, shortlisting, and offer of jobs

· Experience in apply /renewal /cancellation of work permit, S Pass & EP including workers' repatriation

· Monthly payroll including submission of monthly CPF & FWL

· Annual submission of income tax IR8A, NS Claim and others

· Maintain employment contracts and probation confirmations

· Query and question to MOM/BCA to keep abreast of current employment practices

· Manage payroll related matters for staff and workers

· Maintain accurate HR database, up-to-date employee records, and other employment related documentation

· Arrangement of skilled Course enrolments for Workers

· Take care of Dormitory arrangement for workers. Liaison with dormitory staff and maintaining dormitory records

· Maintain training matrix and record WP holder's experience

· Benefit management: Leave management and control claims of medical expenses

· Handling of Government Grant application such as Career Support Programme, Work life Grant etc...

· Assisting in standardizing and streamlining internal HR process

· Any other ad hoc duties asassigned

Requirements

• Diploma/Degree in Human Resource Management or Professional Certificate in Compensation & Benefits

• Min. 2 years of related working experience in construction sector

• Familiarity and experience working with Ministry of Manpower

• Knowledge of Employment Act/legislation, CPF, IRAS

• Team oriented with good time management skills and attention to detail

• Ability to work independently under pressure in a fast-paced and dynamic environment

• Basic proficiency with Microsoft word and excel

Requirements:

· Diploma / Degree in Engineering Or ITE with Vast Experience

· Minimum 8 years working experience in related field and 3 years working experience in a Managerial Position

· Strong persuasion and negotiation skill with a variety of people at all levels

· Ability to manage foreign workers

· Possess good leadership qualities

· Excellent communication and problem solving skills

· Able to handle unexpected challenges

· Strong project management skill. Ability to manage multiple projects, plan against timeline and meet deadline, and forecast, budget and monitor project costs

· Previous working experience in ship building Projects will be an advantage.

. Shipyard, shipbuilding/shiprepair experience is a MUST for this position

. Team player with leadership qualities

. Able to plan, coordinate and monitor ship building and repair actiivites

. Able to work under pressure and tight schedules

. Professionally sound and to be able to trouble shoot mechanical / hydraulic defects at Riding crew at Sea / Anchorage.

. Able to work Extended working hours and week ends too

. MOM relevant certificates required

Responsibilities

• Responsible for the planning, leading and supervision of production team to ensure that works are carried out in a safe, timely and cost-effective manner
• Discussion, advising and coordination of works with all relevant parties
• Preparation of reports as required
• Observe and maintain safety rules and regulations

• Manage project scope, cost, schedule and quality of work from site preparation stage till project completion and handover to clients
• Review contract/ tender agreement and highlight the compliances or deviations of the terms & conditions and technical specifications
• Liaise with agencies, clients and manage sub-contractors
• Ensure work is carried out according to approved plans, quality standard procedure, safety requirements and in a timely manner
• Planning, scheduling and implementing project maintenance works
• Manage cost, work measurement and collection of performance data
• Ensure project technical issues are monitored and resolved

Requirements:-

• Degree or Diploma in Electrical Engineering (Power Engineering)
• Technically skilled and knowledgeable in electrical works & installation
• Relevant experience in sustainable energy projects such as Photovoltaic, Battery Energy Storage and Electrical Vehicle Charging System
• Min 3 years of project management experience
• Leadership skill and able to lead a project team
• Good communication skill and able to interact with all levels
• Possess own vehicle

Prepare tender quotations including taking-off, materials /subcontractors outsourcing and costing· Liaise and establish good rapport with consultants, quantity surveyors, architects, developers and contractors on certification of claims for payments·

Analysis of costs in preparation of tender BQ·

To assess and identify variation order (VO) work for all subcontract packages·

To provide support in terms of measurement and pricing on the Mechanical/ Electrical contract’ VO claim· To process monthly progress claim and final claim·

To attend to all relevant contracts administration and documentation for the project· To take off measurement: re-measurement for sub-contract·

To work out cost estimation or budgetary cost on Mechanical Electrical services.

To liaise with suppliers for quotations

To maintain relevant documentation in orderly and proper mannerRequirements:· Possess Professional Certificate/NITEC/Diploma/Degree in Quantity Surveying / Electrical / Mechanical Engineering

Minimum 2 years of working experience in M&E construction industry not limited to shopping complexes, hotels, condominiums, office building, etc.· Analytical, resourceful, independent, responsibility and able to work in a challenging and fast paced environment

Good Interpersonal, communication and negotiation skills· Computer literacy in MS office· Ability to work in a team, must be able to work overtime and o meet deadline for submission.· Resume to include a recent photograph of the applicant.

Salary shall be commensurate with experience. Candidates are requested to indicate the level of remuneration desired.

We are M&E Contractor company looking for Accounts Executive for our in-house Accounting Function and projects administrative work. Candidates with full set reporting exposure preferred but not a must.

Roles And Responsibilities

- Involve in AP/AR/GL activities and responsible for timely closing of monthly accounts, and yearly closing.

- Prepare/assist monthly cash flow report, management report, and supporting schedules timely, project budget review, variance analysis, cash flow forecast report, and any ad-hoc report.

- Assist with retrieving key information or number consolidation work.

- Prepare budgets for Headquarter Expenses and handle necessary forecast.

- Handling of GST Filing, and Corporate Tax.

- Liaise with auditors, government agencies, financial institutions, and tax agents.

- Review Claims to make sure claims are in line with HR policy.

- Assist to liaise with internal stakeholders to ensure necessary changes are communicated to improve the internal controls.

- Ensure compliance with company policies, processes, and procedures.

- Assist with related companies requirement in Japan, Malaysia and Vietnam.

- Other Ad-hoc task as assigned by your superior and administrative support and any ad-hoc requirement to the team, management, and related superior.

Requirements and Information

- A self-starter who is able to plan, organise and take initiative to meet job objectives and deadlines independently

- Self-motivated, resourceful, proactive, responsible hands-on and meticulous, and good proper document keeping.

- A supportive team player with good communication and collaboration skills - must be able to work with people within and outside of the accounts department

- Good analytical skills and a keen eye for details

- Ability to meet tight deadlines

- Worked similar role with minimum 2-3 years of relevant experience preferred but not a must. Fresh graduate with the right learning attitude are welcome to apply.

- Hands-on experience construction industry preferred but not must.

- Diploma in Accounting / Degree in Accounting / LCCI / ACCA or equivalent.

- Well-versed in MS Office, especially MS Excel, PowerPoint and Word

- Work Location: Jurong East, Singapore.

- Resume to include a recent photograph of the applicant.

- Salary shall be commensurate with experience.

- Restricted to Singaporean