Responsibilities:

• This roles involves overseeing a wide range of human resources programs and policies, to ensure that the organization's current & future HR needs are meet.
• Key responsibilities include recruitment, training and development, compensation, benefits, performance management, and employee volations while ensuring compliance with local employment laws & regulations
• Strong leadership with the ability to intergrate day to day HR functions with long term strategic planning

Requirements:

• Diploma/Degree in HR Management
• At least 3 years of relevant working experience
• Able to handle HR strategies
• Available for an immediate start

Responsibilities

· To only carry out any lifting operation when a lifting supervisor is present or has approved the carrying out of such operation.

· To only engage in acts or manoeuvres per the standard practice or company’s SOP.

· To ascertain whether the ground conditions, on which a mobile crane is to be operated, are safe for travel and suitable for any lifting operation.

· To only use the crane for operations for which it is intended.

· To only manoeuvre or hold suspended loads over public roads or areas after that road or area has been cordoned off.

· To ensure that any outrigger, when it is required, is fully extended and secured.

· Before the start of every work shift, perform operational tests on all limit switches under no load conditions before any lifting operation is carried out and enter the results of such tests in a form or checklist specified by the management.

· To report any failure or malfunction of the crane to the lifting supervisor.

· To ensure that any stationary truck-mounted or wheel-mounted crane is adequately and securely blocked on a slope.

· To only hoist objects for which the weight has been ascertained.

· To only hoist loads if the path of the manoeuvre is clear and to report obstructions, if any, to the lifting supervisor.

· To only hoist loads when a certified signalman has received a clear signal.

· Attend daily toolbox meetings with supervisors and workers for effective consultation, communication and coordination before the commencement of work.

· Perform any other tasks as may be assigned by the supervisor.

· Ensure compliance with relevant government regulations and the company’s quality, safety, health and environmental (QSHE) policies, practices and procedures.

Requirements

· Minimum 5 years of working experience in a similar capacity in marine or related industry.

· Knowledge and understanding of construction safety rules and procedures.

· Valid crane operator license.

· Physically fit due to the requirement to climb in and out of the crane cabin and to see and hear lifting supervisors, signalmen, HSE personnel etc.

· Good communication skills.

· A team player with the ability to work independently as well as in a team.

About our Company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Supervise and ensure that mechanical work activities are performed in a safe and timely manner while adhering to specifications and codes
• Responsible for organising mechanical works, delegating tasks and managing workers on site
• Assist the Mechanical Engineers in planning and monitoring of construction work progress.
• Any other duties to be assigned from time to time

Prerequisites:

• Minimum 3 years' relevant work experience in construction industry
• Knowledge of static and rotating equipment and/or Steam or Gas Turbines
• Ability to manage and handle workers
• Possess a strong commitment to workplace safety

Responsibilities:

• Manage full sets of accounts, including the preparation of monthly management reports
• Compile year-end financial statements in compliance with regulatory standards
• Reconcile intercompany balance and oversee intercompany billings
• Prepare accurate cash flows forcasts to support financial planning
• Coordinate and facilitate audit process, collaborating with auditors as needed
• Perform ad-hoc tasks and assignments as required

Requirements:

• Diploma / Degree in Accountancy
• Minimum 3 to 5 years of relevant work experience
• Proven ability to work independently and efficiently under tight deadlines
• Exceptional attention to detail and accuracy
• Proficient in MS Excel and Word
• Available for an immediate start
• 
  

Job Description

• Prepare, manage, and facilitate design drawings utilizing BIM, Rino, Grasshopper and CAD technologies.
• Ensure all models are compatible and that BIM data is accessible to all project participants.
• Oversee coordination between architectural and structural interfaces, collaborating with main contractors and other trades for effective cross-team support.
• Work closely with the design team and other relevant departments to ensure all drawings meet design specifications.
• Manage design changes and revisions, addressing any discrepancies and queries between design and project teams.
• Attend site meetings as required and perform additional tasks as needed.

Requirements

• Degree in Architecture, Civil Structural Engineering, or a related field.
• Minimum of 4 to 5 years of relevant experience in construction and architectural projects.
• Proficiency in Revit, Navisworks, Rino, Grasshopper, AutoCAD, and MS Office.
• Knowledge of DGN, DWF, IFC, and MicroStation is a plus.
• Strong project management and decision-making skills.
• Ability to work effectively as part of a team as well as independently with minimal supervision.

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

Job Summary:

We are seeking a dedicated and skilled Workshop Executive to manage the fleets of vehicles maintenance project. The successful candidate will be responsible for overseeing the maintenance, repair, and efficient operation of our vehicle fleet, ensuring all project milestones and deadlines are met.

Key Responsibilities:

• Manage the day-to-day operations of the Automotive workshop, including scheduling and supervising maintenance and repair activities.
• Ensure all vehicles are maintained in optimal condition and comply with safety standards.
• Coordinate with suppliers and vendors for parts and services.
• Monitor and manage the fleet budget, ensuring cost-effective operations.
• Maintain accurate records of all maintenance and repair activities.
• Develop and implement preventive maintenance programs.
• Train and supervise workshop staff, ensuring high performance and adherence to safety protocols.
• Collaborate with other departments to ensure the smooth execution of the project.

Requirements:

• Diploma in Mechanical Engineering, Automotive Technology, or a related field.
• Proven experience in fleet management, vehicle maintenance, and workshop operations.
• Strong knowledge of automotive systems and repair techniques.
• Excellent organizational and project management skills.
• Ability to lead and motivate a team.
• Strong communication and interpersonal skills.
• Proficiency in using fleet management software and tools.
• Ability to work under pressure and meet tight deadlines.
• Valid driver’s license

Job Description

The Project team is currently looking for suitable candidates to join as Assistant Contract Manager to drive the ongoing and new projects in the company.

Duties & Responsibilities:

• Liaise with Director & Project Team to resolve any contractual disputes arising in the projects. Investigate and resolve or refer as appropriate disputes/complaints in accordance with contractual requirements in a timely manner

• Liaise with clients, sub-contractors, and suppliers on project requirements.

• Oversee overall planning and execution to ensure optimization of resources and manpower

• Initiate, co-ordinate and oversee the interactions with the various involved disciplines/personnel to support the project

• Provide support in administering the main contract.

• Responsible for full QS work including valuation, submission of variation works, budgeting, controlling of cash flow and cost, processing of claims, contract payments, and settlement of final accounts, working with procurement team on the administration of projects.

• Assist to prepare tender and contract documents including bills of quantities.

• Prepare and analyze costings for tenders.

• Provide advice on contractual claims and procurement strategy.

• Analyze outcomes and write detailed progress reports.

• Value completed work and make progress claims.

• Track of any variations for ongoing projects that may affect costs.

• Undertake cost analysis for repair and maintenance project work.

• Prepare and submit catalogues and sample boards.

• Other ad-hoc duties as assigned by the HOD’s.

Qualifications & Experience

• Degree / Diploma in Quantity Surveying / Building or equivalent from a recognized University.

• Minimum 5 years of related working experience in residential and industrial projects.

• Good working knowledge in Mechanical and Electrical.

• Good knowledge of Singapore health and safety rules and regulations.

• Ability to use software tools for costing and budgeting.

• Organizational skill with attention to detail, adaptable and flexible.

• Good communication and facilitation skills.

• Ability to work well in a team as well as independently and demonstrate initiative and commitment.

Other info

• Engineering and construction company

• Salary $5,000 - $7,500

• 5-day work

• Woodlands

Interested candidates, pls apply with resume in MS Word format

You may email to [email protected]

EA License No: 17C8809

EA Reg No: R1108561

The Singapore Centre for 3D Printing (SC3DP) offers a full range of additive manufacturing services, from design and infrastructure to production and validation. With advanced technologies such as topology optimization, generative design, and bioinspired design, SC3DP creates optimized products using a variety of novel materials and printing processes, including hybrid printing, post-processing, and emerging technologies. Sustainability is a top priority for SC3DP, which offers material development and control services that combine artificial intelligence, big data, and other digital tools for process optimization, as well as non-destructive testing for AM parts. Backed by a team of experts and a state-of-the-art facility equipped with the latest equipment and technologies, SC3DP is committed to leading the way in sustainable additive manufacturing research and development.

We are looking for a Research Associate to develop novel 3D printing technologies in the area of large-scale 3D cementitious structural printing.

Key Responsibilities:

Structural Printing

• Large-scale structural modules with Robotic arm and Gantry system.
• Programing code for Robotic arm and Gantry system
• Operating the printing system including mixer, pump, robotic arm, and Gantry system

Printing Path Optimisation

• Computational design of 3D concrete printing structure
• Optimise the printing path to ensure the smooth structure surface finish and excellent mechanical properties.
• Conduct structural testing, such as tensile, compression, flexural and shear tests
• To investigate the key parameters in the design of 3D printing concrete specimens on the structural performance.
• Conduct numerical analysis using finite element modelling of structural elements by using FEM
• Data acquisition and Image processing with MATLAB

Experimental Investigation

• Design and fabrication of experimental facilities including nozzles and inline control systems based on the theoretical model and CFD simulation.

Job Requirements:

• Master degree in 3D cementitious material printing, additive manufacturing or Civil Engineering, with a specialization in Structural Engineering
• At least 2 years of research experience in 3D concrete printing (3DCP) with strong knowledge on 3DCP Process and path planning, Design for 3DCP, tool path and machine code generation
• Computational Design and 3D concrete printing
• Possess good knowledge of structural analysis, concrete and steel materials, and finite element analysis
• Strong knowledge and experience in large scale 3D cementitious material printing
• Excellent programing code for robotic arm and gantry system operation.
• Strong experience in parametric modelling software like Rhinoceros 3D, Grasshopper, CAD/CAE tools like MasterCAM, Robotmaster.
• Ability to work on structural and surface optimization
• Excellent interpersonal, problem solving and analytic skills
• Able to work in a multi-disciplinary team

We regret that only shortlisted candidates will be notified.

About the Role

Zero-Error Systems (ZES) is seeking versatile, detail-oriented Field Application Engineering - Manager. In this role, you will work closely with the sales and engineering team to identify customer needs, develop technical solutions, and ensure the successful implementation and optimization of ZES’ products. Working in a dynamic, fast-paced, development environment, you will also play a crucial role in providing technical support and expertise to customers. This position requires a blend of technical knowledge, customer interaction, and problem-solving skills.

Key Responsibilities

1) Customer Support and Relationship Management

• Serve as the primary technical contact for customers, addressing their queries and providing technical support.
• Build and maintain strong relationships with customers to understand their requirements and provide tailored solutions.
• Provide effective FAE support to customers for ZES products, through alignment with internal sales teams and engineering team.

2) Pre-Sales Support:

• Collaborate with the sales team to understand customer needs and develop technical proposals.
• Assist in the preparation and delivery of product demonstrations and technical presentations to potential customers.
• Provide technical input for the development of sales strategies and proposals.

3) Technical Expertise and Solution Development:

• Stay up-to-date with industry trends, emerging technologies, and competitive products.
• Develop and customize technical solutions to meet specific customer requirements.
• Partner closely with the engineering team to provide customer feedback and influence product improvements.

4) Post-Sales Support:

• Ensure successful product implementation and integration at customer sites.
• Provide ongoing technical support and troubleshooting to resolve customer issues.

5) Documentation and Reporting:

• Prepare and maintain detailed technical documentation, including application notes, user guides, and technical reports.
• Maintain accurate records of customer interactions, issues, and solutions.
• Provide regular updates and reports to management on customer activities and support issues.

6) Any other duties assigned

Key Requirements

• Bachelor’s in Electrical Engineering or related field.
• Strong understanding of the semiconductor industry, market dynamics, and competitive landscape in the region.
• Proven experience in a field application engineering or similar technical support role, for Semiconductor components, including Power management IC, MCU/FPGA is preferred.
• Excellent problem-solving and analytical skills.
• Strong interpersonal and communication skills.
• Able to work independently as well as a good team player
• Detail-oriented, with a strategic outlook and a focus on driving results.
• Willingness to travel to customer sites and industry events as required.

About the Role:

We are seeking a seasoned Senior Product Development Manager with over 10 years of experience specializing in the design and development of automation products for bioenvironmental applications. This position focuses on driving innovative projects in Industrial Automation, Bio-Environmental Monitoring, and Consumer Electronics, managing the complete product development lifecycle to deliver high-quality, technically advanced, and manufacturable solutions.

You will bring in-depth knowledge of electronics, embedded systems, full-system automation, and mechanical integration to design and guide fabrication teams, producing innovative products and prototypes for industrial and academic clients.

Key Responsibilities:

1. Product Development & Lifecycle Management

• Lead the entire product lifecycle, from concept creation to batch mass production, ensuring on-time delivery and cost-effectiveness.

2. Circuit Design

• Design and develop high-performance analog, digital, and mixed-signal circuits, focusing on low-noise designs, high-resolution ADC/DACs, and high-speed communication interfaces.

3. PCB Design & Manufacturing

• Execute PCB design using tools like Altium Designer, incorporating Design for Manufacturability (DfM) and Design for Testability (DfT) principles.

4. Embedded Systems Development

• Program and debug firmware for microcontrollers (MCUs) and system-on-chips (SoCs), optimizing for performance and energy efficiency.

5. Data Communication Systems

• Develop robust communication protocols, including I²C, SPI, RS232, RS485, and other bus systems, integrating sensor networks and actuator controls.

6. Mechanical Integration

• Collaborate with and review mechanical designs using tools like SolidWorks and AutoCAD, ensuring seamless electronic-mechanical compatibility.

7. System Testing & Quality Assurance

• Conduct Design Failure Mode and Effects Analysis (DFMEA), tolerance analysis, reliability testing, and EMI/EMC validation to meet regulatory and quality standards.

8. Bio diagnostics

• Apply hands-on expertise in bio diagnostics, driving the development, testing, and optimization of diagnostic tools and processes.

9. Prototyping & Troubleshooting

• Oversee prototype development, testing, and root-cause analysis to resolve hardware and firmware issues promptly.

10. Interdisciplinary Collaboration

• Work closely with mechanical, software, and quality assurance teams to deliver integrated and cohesive product designs.

11. Documentation & Compliance

• Maintain comprehensive project documentation to ensure adherence to ISO standards and regulatory requirements.

Requirements:

Technical Expertise:

• Proficient in Altium Designer; experience with OrCAD or Eagle is a plus.
• Advanced programming skills in C, C++, and Python, with experience in embedded systems and RTOS environments.
• Strong knowledge of analog and digital design principles, including power electronics and high-frequency PCB layouts.
• Hands-on experience with microcontrollers, FPGA programming, and single-board computers (e.g., Raspberry Pi).
• Expertise in communication protocols: I²C, SPI, RS232, RS485, UART, and their applications in IoT systems.
• Experience in sensor integration, including temperature sensors, photo detectors, and flow meters.
• Proficiency in mechanical CAD tools for cross-disciplinary collaboration; SolidWorks and AutoCAD preferred.
• Practical experience in GUI development and familiarity with Linux-based environments (e.g., Ubuntu).
• Knowledge of P&ID diagrams, microfluidic system design, and control methodologies.
• Strong analytical and problem-solving skills, with expertise in (D)FMEA, design optimization, and quality management systems.
• In-depth understanding and hands-on experience in bioprocessing systems, particularly in E. coli detection and diagnostics.
• Expertise in developing and implementing diagnostic methods for microbial monitoring, including biosensors and other analytical tools.

Industry Expertise:

• Experience in water quality monitoring systems and microbial monitoring technologies.
• Familiarity with fluidic control systems, including valves, pumps, and flow control mechanisms.

Soft Skills:

• Excellent communication skills, with the ability to document and present technical concepts effectively.
• Proven ability to excel in fast-paced, collaborative environments.
• Proficiency in MS Office tools (Word, Excel, PowerPoint); experience with Power BI and Visio is a plus.

Key Responsibilities:

• Manage full accounts cycle, including bank reconciliation and journal entries.
• Ensure accurate data entry in for all transactions.
• Prepare financial data for entry into the financial system
• Keep accounting records and bank statements
• Ensure timely, accurate month-end and year-end closing
• Prepare and file GST returns
• Preparation of tax computation and tax planning
• Filling tax returns on time and updating the management about new changes in rules and regulations.
• Liaise and coordinate with external auditors and tax agents;
• Ensure accounting deadlines are met;
• Review subsidiary accounts
• Other ad hoc duties

Job Requirement

• Diploma in Accountancy or equivalent.
• Minimum 2 years of relevant accounting experience.
• Have prior experience in handling full set of accounts and statutory reporting
• Independent to fulfil tasks and a team player to perform tasks in the company workflow

*Expected to conduct equipment training*

The Job:

Training

1. Achieve annual department budget and targeted trainee participation
2. Provide guidance to trainers for conduct of WSQ courses with alignment to stat board regulatory requirements
3. Upkeep SSG ATO and ITE COJTC status as an accredited training provider
4. Develop training programs on MHE and collaborate with Subject Matter Experts for smooth delivery of training course syllabus

Curriculum Developer:

1. Develop new coursewares (Product and Process) to meet market trend and demands
2. Submit new coursewares for regulatory approval for course commencement
3. Enhance existing coursewares to meet regulatory requirements
4. To maintain course registry records and filing

The Person:

• Min Diploma – preferably Engineering
• Attained full WSQ DACE/DDDLP certification
• Min 3 yrs of experience
• Possesses Class 3 and Forklift license and has experience operating it, comfortably
• Written and oral communication skills, specifically an ability to engage an audience on training topics to solidify adoption of product.
• Effectively bi-lingual in English and Mandarin
• Develop and design courses/curriculum for all learning needs.
• Knowledge on WSH requirements
• To integrate teaching methodologies, learning styles and educational materials for better engagement to meet learning outcomes
• Must be able to do stand-up trainings for internal and external stakeholder
• Experienced in developing training plans
• Sales and marketing of courses
• Full Advanced Cert in Training and Assessment (ACTA)

Responsibilities

• Perform Reliability, Maintainability and Supportability (RMS) analysis, to ensure an effective through life support capability package to support the System.
• Engage design engineers on design specifications and influence Reliability and Maintainability (RAM) in their design.
• Engage customers and contractors, and to ensure RAM and ILS deliverables are on schedule and of quality.
• Lead ILS team of technical writers, technical trainers and supply support management to ensure supportability of the Systems.

Requirements

• Degree in Mechanical Engineering or Mechatronics Engineering or equivalent.
• Preferably RAM and ILS knowledge. Training / OJT will be provided, if not equipped with basic statistics skills.
• Preferably knowledge in either Automotive and/or Artillery systems.
• Meticulous in quantitative analysis and strong in statistical analysis.
• Good leadership skills and project management skills.
• Strong communication & interpersonal skills.
• Entry Level candidate are welcome to apply

1. Manage and control daily work activities at Mechanical and Electrical project sites of Fusion Engineering & Services Pte Ltd at various locations in Singapore (Construction and plant maintenance work). Applicant should be well versed in reviewing contract documents and submitting quotations with a proactive approach

2. Applicant shall implement safe work practices at the job site to work towards Zero LTI

3. Applicant should have sound experience in managing manpower and execution of project sites

4. To work closely with the owner, client, sub-vendors, main contractors, and suppliers

5. Manage and Execute the project activities including Quality to ensure that the project is completed according to the planned schedule

6. The Project Manager shall be responsible for ensuring that the project execution is according to the project Safety and quality requirements

7. To maintain project documentation at all phases of construction

Salary: $2600 for first 3 months. After confirmation is $2700

Industry: Engineering

Located at Tuas

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Responsibilities

• Lead EHS department.

• Develop, review, revise, maintain and implement EHS Management System.

• Ensure legal compliance as per statutory requirements.

• Conduct regular EHS inspections and audits.

• Manage contractor from the EHS perspective.

• To investigate all incidents on the work site and implement correction actions.

• Review and revise all risk assessments to ensure compliance.

• Able to drive EHS culture in the company

• Conduct routine checks on general safety practices and propose corrective actions and measures to be taken.

• Ensure adequacy, effectiveness and readiness of fire protection system and Emergency Response Team management system for Office and Factory.

• Ensure inspection and review of all project sites activities and operation and alert relevant Section Head of any machinery, equipment, appliance, activity or process used in each department that exposes any person to the risk of bodily injury, and to recommend appropriate corrective measures.

• Promote safe and healthy working conditions through education, awareness campaigns, training courses, drills, competitions, contests and other activities.

• Liaise with statutory bodies on EHSS-related licenses and permits and keep updated on the latest change in regulations and Acts and be conversant with all waste management regulations, procedures and licensing requirements.

• Conduct fire and safety training to employees.

• Constant update to management of EHSS performance and the continual improvement plan.

• Liaise with 3rd party security service provider and ensure the appropriateness and effectiveness of services rendered to organization.

• Constant plan-do-check-act on the related EHSS matter of plant's Environmental, Health and Safety Management System and ensure continual improvement/upgrading of the system.

Qualifications & Experience

• Relevant Qualification in Workplace, Safety and Health with 8 years relevant working experience in Construction Engineering Industry.

• Strong technical competency, good interpersonal and communication skills.

• Ability to work independently and target oriented in a stressful environment.

• Ability to interact effectively with colleagues in other business units.

Other info

• Engineering and construction company

• Salary $5,000 - $7,000

• 5-day work

Interested candidates, pls apply with resume in MS Word format

You may email to [email protected]

EA License No: 17C8809

EA Reg No: R1108561

ALATAS Crane Services Worldwide is a worldwide operating crane & deck machinery service specialist and offers crane and hydraulic related services and parts supply in the Ship, Offshore, and Construction industry.

With our global set-up of 14 offices worldwide, we offer field service, provide technical solutions for emergency repairs, large scale overhauls, load testing, inspections, component repairs, spare parts supply as well as supply of new cranes and upgrades to existing ones.

Our specialized Crane Service Engineers are professionals in their field and are available attend to crane problems throughout the world.

Our workshop operations are geared to repair marine machinery, hydraulic machinery and accident repairs on steel structures, details are here: www.alatasworkshop.com

As a manager of our workshop repair operations, and to support our filed service we are employing a Workshop Manager as follows:

JOB DESCRIPTION:

• Must be able to solve technical issues in relation to complex machinery/fabrication works repairs for internal and external stakeholders
• Capable of negotiating and communicating effectively with clients, as well as managing tenders, proposals, and quotations
• Oversee and ensure the successful execution of all workshop activities, coordinating efforts to complete contracts within budget and the established timeframe
• Ensure that the quality of all repair/fabrication work carried out conforms to the client’s specifications and to the Company’s quality system

Offer consistent feedback and reporting, both informal and formal, to Management regarding the performance and outcomes of the workshop

• Recruit & train workshop personnels

REQUIREMENTS:

• Solid working experience and proven track record as Workshop Manager in a Ship Yard, Port, Marine Engineering company or a Construction Company
• Previous sailing experience and qualification as Chief Engineer, sailing on oceangoing ships will be an added advantage
• Understanding of Engineering Regulations, norms and clads requirements
• Degree in Mechanical Engineering, Chief Engineer's licence or similar
• Excellent communication skills to liaise with Customers worldwide
• Experience in cost calculation and personnel management skill

• Perform installation of HVAC related equipment following company policies and manufacturer’s specifications
• Carry out wiring of both low and line voltage to cooling and heating equipment
• Perform installation of copper refrigerant lines to air conditioning units, including brazing and soldering
• Perform installation of flex and sheet metal duct systems in light commercial and residential buildings
• Ensure connection of gas lines to heating equipment is properly done
• Determine the right material needed for installation work by pre-measuring jobs
• Receive all materials and equipment required for each job, confirm and load them into company vehicle
• Provide necessary support to other team members to be able to complete tasks on time as instructed by management.

Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

As an Air Conditioning Repair & Servicing Technician, your main duties is to service, troubleshoot and repair air conditioning systems to ensure optimal performance and indoor air quality. This role involves diagnosing issues, performing repairs, and conducting routine maintenance to enhance system efficiency and customer satisfaction.

Job Description:

• Collect the spare parts from the warehouse store based on the daily job indicated on the tablet.
• Troubleshoot and resolve issues on malfunctioned HVAC systems.
• Wash and clean all dismantled parts to improve efficiency and air quality.
• Refill refrigerants by replenishing and fixing leaks as needed.
• Communicate with clients with regards to problems in equipment and post-jobs reports.
• Ensure safe-keeping of hand tools and maintain good housekeeping.
• Must wear personal protective equipment (PPE) when necessary (e.g. googles, earplugs, respirators, safety harnesses, safety shoes, helmets, sunscreen).
• Ensure all works are carried out safely in accordance with safety procedures and practicing of Workplace Safety and Health (WSH) Act.
• Provide technical advice and assistance on all maintenance functions.
• Prepare service reports after every completed job for customer's endorsement.
• Handle any ad-hoc projects and duties assigned by reporting manager and/or management.

Job Requirements:

• Possess a Singapore Class 3 license will be an added advantage.
• Minimum Nitec / NTC 2 or 3 certificates in Electrical, Mechanical or Electronic field.
• At least 1 year of working experience in the related field; with maintenance experience in HVAC, refrigeration & M&E systems.
• Positive attitude, good interpersonal & customer-centric skills.
• Experience in air-conditioning repair & maintenance.
• Strong knowledge/experience in HVAC or ACMV systems for residential or commercial sectors.
• Ability to work independently and collaboratively in a team.
• No experience is also welcome to join as apprentice.

Responsibilities:-

• Provide sales support which includes quotation preparation, processing of orders and overseeing the delivery process to customers
• Maintain close communication with customers
• Perform some administrative duties and multi-task other duties as assigned

Requirements:-

• Minimum Diploma in Engineering or equivalent
• Possess 2 years of experience & familiar with commercial documentation. Those who have worked in Marine or Oil & Gas industries will be an advantage
• Matured personality, dynamic, self-motivated and result-oriented
• Able to work independently with min supervision
• Positive attitude and good personality
• Able to work in tight schedule and under pressure
• Proficient in MS Office

We are looking for Electrical Engineers to expand our team.
Candidates with no experience are welcome to apply.

Responsibilities:

• Draw or modify electrical and GA diagrams or write engineering specifications to clarify design details and functional criteria of the equipment with respect to customers' requirement
• Conduct inspection and quality check of electrical equipment
• Conduct installation and troubleshooting of electrical equipment
• Set up and operate test equipment for calibration or configuration of electrical equipment
• Keen mind on quality management, with good documentation, continuous improvement of processes.
• Keen mind on operational planning to ensure good continuous supply of equipment for customers and internal requirement
• Support sales personnel for technical clarifications with customers
• Involve in pre-sales activity of machinery sales, e.g. sizing of generators, studying of tender documents etc.

Requirements:

• Minimum Diploma in Electrical Engineering or any relevant course
• Candidates with no experience are welcome to apply
• Ability to read and amend schematic drawings & circuit drawings
• Experience and knowledge in generators a plus
• Excellent interpersonal and communication skills

• Transport clients and/or packages to and from destinations
• Arrive at destinations on schedule
• Fulfill administrative needs, like office pickups
• Interact with clients professionally at all times
• Ensure that the vehicle is always fueled and ready for use
• Arrange for vehicle repairs as needed
• Keep mileage records and repair records up-to-date

• Transport clients and/or packages to and from destinations
• Arrive at destinations on schedule
• Fulfill administrative needs, like office pickups
• Interact with clients professionally at all times
• Ensure that the vehicle is always fueled and ready for use
• Arrange for vehicle repairs as needed
• Keep mileage records and repair records up-to-date

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

The Climate Transformation Programme (CTP) aims to develop, inspire and accelerate knowledge-based solutions and educate future leaders to establish the stable climate and environment necessary for resilient, just, and sustainable Southeast Asian societies.

CTP will generate knowledge and innovation across disciplines including climate and Earth science, ecology, materials science, artificial intelligence, humanities, social sciences and the arts, finance, health, and engineering. It will also translate state-of-the-art scientific results into real world solutions for Singapore, and it will transfer these solutions to Southeast Asia (SEA) and beyond.

As part of this programme, Research Cluster 4: Novel engineering solutions for climate impacts, will explore engineering solutions to adapt to sea-level rise and climate-constrained water resources. The CTP research programme is summarised here: https://earthobservatory.sg/research/climate/climate-transformation-programme>.

The Project Officer will be based in School of Civil and Environmental Engineering (CEE) and will be expected to work effectively for advancing the engineering solutions to mitigate the climate change impact which focus on new design concepts for seawalls and coastal defence systems. The position is expected to perform independent and collaborative research to meet the project objectives, to assist the management work of the project daily operation to facilitate the success of the project.

Key Responsibilities:

• Conduct research on laboratory experiments to test the performance of flexible seawall in flume test.
• Keep track of the latest related research developments
• Writing project progress reports
• Assist in the daily project operation management

Job Requirements:

• Bachelor in civil engineering, Coastal Engineering or related discipline
• Expertise in laboratory soil mechanics testing
• Knowledge in ground improvement, coastal erosion and management, hydrodynamics
• Publication track record is an advantage
• Proficiency in oral and written English - essential for data analysis and communication with stakeholders

Interested applicants are invited to submit a cover letter and full CV in one document. Enquiries about this position can be made to Dr. Wu Shifan ([email protected]).

We regret that only shortlisted candidates will be notified.