Overall Job Objectives

Assists the PM to oversee the construction activities, progress, planning, implementing, and monitoring of work schedules in accordance with the master and detailed work programme

Core Responsibilities

1. Attend site meetings and inspection

2. Preparation of documentation including project status report, method of statement and work procedure for the project.

3. Planning, executing, monitoring and control of the project.

4. Liaising and coordinating with all parties such as clients, consultants, consultants’ representatives, site supervisors, and sub-contractors

5. Handing of technical and engineering problems

6. Supervise ongoing site activities closely

7. Ensuring that the quality control of the project is met

8. Ensure that all the construction safety rules and regulations are being observed

9. Prepare necessary work and safety permits, submission documents and drawings once work are completed.

10. Any other ad-hoc tasks assigned

Job Specifications

1. Degree in Engineering or related disciplines

2. Able to read/understand/execute work based on construction drawings

3. Good communication, interpersonal and collaboration skills

4. Minimum 3 years of relevant experience.

-To Project management Coordinate with main-con and consultant for drawing submission, material sample submission and meeting with main-con and consultant

-Select appropriate electrical materials to complete designs such as MSB, Distribution lighting fixtures, cable tray layout, lighting and receptade layout, single line diagrams, CCTV, data Telcom operational routing diagram, ELV systems, control schematic and writing diagrams

-Identify discrepancies in tender/contract/IFC drawings and raise queries for clarification, A and A ( R and R) + Constriction Filed

- Attend all operational matters related to the daily running of the project and Handle multiple projects simultaneously

-Testing and commissioning for Electrical apparatus

-QA/QC documentation review of engineering deliverables

-LV and HV cables sizing calculations and prepare a bill of material

-Planning workforce arrangement and supervision and working planning

-Giving progress reports regularly to teams and monitoring project schedules

-Prepare Electrical shop and As-builts SLD Rcp drawing

Job Description:

• Overall in charge of site coordination.
• Manage and oversee the day-to-day construction activities of the project.
• Monitor and control the general workers' deployment on-site.
• Manage job costing against the work scope.
• Carry out work scheduling, material requisition planning, project coordination, and documentation.

Job Requirements:

• Minimum 02 years of related work experience in a similar capacity in the local construction industry.
• Able to multi-task and workvwithin tight schedules and deadlines.
• Strong leadership and problem-solving skills.

Team player and good communication skills with clients, consultants, sub-contractors and site staff.

1. To coordinate and manage building construction M&E site works.

2. Ensure all M&E works are performed on time and in compliance with all necessary standards, code of practice and safety regulations.

3. Responsible for the supervision and coordination of M&E works at construction site.

4. Monitor progress, quality of workmanship and compliance.

5. To coordinate M&E wall/floor penetration drawings for approval.

ROLE

 To bring in quality business and increase Company’s market share in the security industry.

RESPONSIBILITIES

 To achieve the sales target set by the company.

 Ensure payments are received; and settle any dispute that may arise.

 To handle yourself professionally so as to upkeep the image and prestige of the company.

 Provide on the ground support for sales team as they generate leads and close new deals.

 To communicate and ensure that the installation contractors and our project team are familiar with the requirements of the projects, and to see to it that the job is properly and professionally carried out.

 Develop plans for the sales team to acquire new customers or clients, through direct sales techniques, cold calling, and business to business marketing visits.

 Submit daily activity report to Sales Manager

 To attend daily meeting and provide updates

 To perform Technical work when required

 To perform research and development on new products

 Any other duties assigned by Head of Department

JOB RESPONSIBILITY

• Find tender opportunities GeBIZE.

• Prepare Tender and submission.

• Familiar with reinstatement and maintenance work.

• Review and analysis of Tenders Drawings & Documentation.

• Preparing Tender submissions and reviewing Procurement & Reviewing of Contracts, and ensuring compliance.

• Reviewing and commercial management of all projects, to ensure accurate and reliable reporting.

• Review all incoming correspondence from Clients, Consultants & Design Team to identify contractually critical items and to initiate replies.

• Estimating a range of projects in a variety of sectors.

• Improve and implement best practice commercial processes and accurate budgeting.

• Maintain accurate records and provide necessary detailed backup to support commercial tracking and costing.

• On Site measurement of Electrical Services.

• Preparation of specialist sub-contract work packages.

• Preparing monthly Commercial Progress reports.

• Other ad-hoc duties assigned by Construction Manager.

Job Description & Requirements

• Assist the Factory Production Manager in supervising the factory/production Team Leaders and workers by overseeing fabrication work for quality consistency and operation efficiency, based on AutoCad drawings and Designs and prepare weekly production plan.
• Ensure all workers follow industry standard health and safety guidelines with weekly WSH safety meeting.
• Make sure daily work plan, PPE, goods arrival and unloading are carried out smoothly , timely, and completely.
• Innovate and automate for improved production output and overall efficiency with new automated or robotic machines and work flow.
• Liaise and manage fabricated products are ready with project engineers for installation at sites.
• Check Team Leaders record of materials in and out of factory to project sites, all stock and inventory is maintained with accuracy and up to date.
• Organise and upkeep factory storage and movement of inventory are smooth and efficient.
• Assist to source better and cost savings materials from overseas and liaise with overseas suppliers for stock replenishing.
• Involve in the annual ISO and bizsafe renewal.
• Improvise designs for overall efficiency of system parts and communicate with key personnel.
• Manpower planning and workers training to make sure workers are equipped with relevant knowledge and skills.
• Need autocad, fabrication, welding knowledge to check drawings and making sure welders are fabricating correctly.
• Assist purchaser to source for materials overseas.

Requirements :

• Minmum Diploma in either mechanical, Electrical or Construction Engineering or other relevant discipline.
• Required skill(s), MS Office, MS Project AutoCad.
• 3 to 5 years work experience in construction sites.
• Responsible team player with the ability to work independently in challenging projects and timelines.

Responsibilities:

• Operate 4-5 axis CNC Vertical Milling Machines and Horizontal Boring Machines.
• Set up machines accurately, including tooling, fixtures, and workpieces, based on engineering drawings and job specifications.
• Keep up with the housekeeping requirements at the workstation.
• Carries out duties as assigned by Foreman.

Requirements:

• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre.
• Understanding of tooling criteria, machining applications and process documentation.
• Min ITE Technical Certificate, preferably in Precision Metal Machining.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

The person will be responsible for

1) Prepare & compile Monthly Progress Claim for all the projects;

2) Prepare & submit Variation Order for all projects where applicable;

3) Quantity Take-off;

4) Assist in monitoring & compilation of all ISO 9001, ISO14001 & ISO45001 documentation for Audit & BCA Accreditation;

5) Any others relevant task that maybe assign from time to time

Qualifications : Diploma in related field;

Experience : Fresh or 2 years relevant experience will be added advantage;

Job Responsibilities:

• Prepare import/export documents
• Coordinate with vendors/customers for delivery arrangements
• Work with logistics partners to ensure timely and accurate shipments
• Ensure shipment documents comply with customs regulations
• Ensure timely invoicing of shipments as per company KPIs
• Maintain accurate and up-to-date shipping records
• Monitor production schedules and release work orders to meet shipment deadlines
• Prepare and review quotes based on customer requests
• Review contracts to ensure consistency with quotes
• Support purchase order generation, order confirmation, and delivery

Requirements:

• Minimum GCE O level
• Minimum of 1 years of work experience as Administrator
• Preferred with knowledge of SAP
• Must be detail-oriented and strong organizational skills
• Competence with Microsoft Office
• Good personality and able to handle customer queries

• Plan, organize, direct and run optimum day-to-day operations of the facility.
• Be responsible for the overall maintenance and repair works of the plant equipment.
• Submission of documentation following preventive maintenance
• Minimal downtime of company’s/ client machinery and equipment
• Inspection of facility equipment
• At least 1 years or more of relevant experience in crane manufacturing industry or related
• Able to multi task & able to develop improvement plans
• Hardworking, committed & independent
• Team player & self-starting individual

Pre & post contract Quantity Surveying Works such as:-

1. Taking off quantities.
2. Tendering of projects.
3. Sourcing of sub-contractors, suppliers and materials.
4. Progress payment and claims.
5. Contract administration.
6. Variations
7. Final accounts

Degree or diploma in Building, Quantity surveying or equivalent with at least 3years working experience with main contractor in private residential projects.

• Design and prepare AutoCAD drawings based on AutoCAD standards.
• Review and incorporate design details from Coordinated Combined Services Model.
• (CCSM) into Combined Serviced Design (CSD) drawings.
• Work with design and construction team to prepare drawing and relevant documents for submission.

Minimum Requirements:

• Degree/Diploma in Civil/Mechanical/Electrical Engineering.
• At least 2 year relevant experience.
• Experienced in Microstation software to prepare computer-aided drawings.
• Able to work independently in a fast-paced environment.

Roles and Responsibilities

• Facilitates HSE risk assessment conducted by the line management and ensures all necessary preventive measures against the identified hazards are implemented.
• Reports HSE incidents to the management and relevant stakeholders and takes appropriate actions.
• Facilitates, assists, and provides guidance on incident investigations to learn better ways for mitigating risks.
• Provides feedback to the management and employees on lessons learned and best practices from within their own unit and across project management.
• Supports the Site/HSE Manager in reporting progress with respect to the implementation of the project-level HSE objectives and Key Performance Indicators (KPIs), as required.
• Assists the line managers and supervisors in understanding their obligations, liabilities, and requirements for role fulfillment, as per local HSE laws and project-specific requirements.
• Supports and drives behavioral change through the local implementation of project specific performance improvement programs and practices.
• Supports and embeds an exemplary health and safety culture with a strong focus on the environment across their respective organization.
• Ensures that the appropriate HSE-related equipment and tools are available and used effectively.
• Contributes to and/or plans and executes HSE-related projects.
• Develops project objectives and reports the progress to management.

Qualification Requirements

• Registered as a Workplace Safety and Health Officer (WSHO) with the Ministry of Manpower (MOM).
• Project Workplace Safety and Health Officers (WSHO) with at least eight (8) years’ experience in industrial buildings and process plant construction projects.

Job Description

Candidate will be tasked to do the programming for various CNC machines. Company's main machines are laser, turret, pressbrake, bandsaw and plasma cutting.

• Able to interprete sheet metal drawings like panels, claddings etc.
• Have experience in either 1 of the 4 CNC machines - laser, turret, pressbrake or plasma cut.
• Willing to undertake training to do programming for all CNC machines.

About our group:

Sputtering is the heart of media process in recording media organization. We are a dynamic team working in a world’s largest state-of-the art magnetic media manufacturing environment with highly automated processes and advanced control systems.

We pride ourselves on delivering committed equipment performance and operational objectives through effective maintenance, technology, and innovation to help Seagate succeed. Our team is made up of committed, talented, and friendly people passionate about our job, believing in people well-being and people development.

New employee will have positive experiences with our comprehensive induction and training programs with buddy system.

About the role - you will:

• Perform preventive maintenance and product conversion of the sputtering tool.
• Work with equipment and process engineering on continuous tool improvement on reliability performance and product defect reduction.
• Initiate ideas on equipment OEE and productivity improvement, safety hazards and cost saving reduction projects.
• Be trained to utilize data analytics and machine learning applications for tool troubleshooting and your feedback will be sought after for further improvements
• Be trained on vacuum technology fundamental and have the opportunities for continual learning and growth.

About you:

• Self-motivated and positive working attitude
• Team player with good problem-solving skill
• Willing to work in a clean room environment
• Willing to work on 12hr (7.30pm to 7.45am) night shift pattern

Your experience includes:

• Diploma in Mechanical, Electrical, Mechatronic Engineering or Diploma or ITE
• Knowledge or experience in Mechanical or Electronics
• Troubleshooting Mechanical or Electrical Equipment is an advantage
• Clean room experience will be an advantage
• Data analysis and MS office skills
• Fresh graduates are welcome

Location:

Our Woodlands site is one of the largest electronics manufacturing sites in Singapore, housing our recording media operations. Spread over three sites, it is easily accessible via bus or from the MRT Station, with many employees taking mass transportation to work. Here at work, you can enjoy breakfast, lunch, dinner, and snacks at our onsite canteen and coffee shop. We offer a range of facilities including an in-house gym and dance studio, as well as after-work badminton and table tennis competitions. On-site celebrations and community volunteer opportunities also abound.

Nanyang Technological University (NTU Singapore) invites applications for a Professor (Tenured) / Associate Professor (Tenured) in Power Engineering

Professor (Tenured) / Associate Professor (Tenured) in “Power Engineering”

Established in 1981, the School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University, Singapore. Built on a culture of excellence, the School is renowned for its high academic standards and research. To support advanced research, the School hosts 13 research centres and facilities which are well-equipped with sophisticated and state-of-the-art equipment. Besides the 13 centres, there are more than 50 laboratories, supporting both the teaching and research activities in the School.

Join the School of Electrical and Electronic Engineering of the College of Engineering, Nanyang Technological University, Singapore as a faculty member and embark on a challenging and exciting career in research innovations and teaching excellence, so as to prepare engineering leaders of the future.

Responsibilities

The candidate is expected to possess an international reputation as a technological leader in power engineering which includes but is not limited to Power Systems, Renewable Energy Systems, Smart Grid, Electric Energy Storage Systems, Power Electronics & Energy Conversion, etc. Candidates should have an excellent record of distinguished academic and scholarly achievements, along with a demonstrated commitment to the core traditions of excellence and innovation. Upon the appointment, the job holder is expected to play a leading role in the area of power engineering for NTU’s School of EEE so as to grow new capabilities, nurture innovative ideas and develop strategies to secure external resources for power engineering projects on a sustainable basis. The job holder is expected to demonstrate academic and research leadership and contribute to the nurturing of young researchers in power engineering and the broader area of Electrical and Electronic Engineering.

The selected candidate will also be expected to work closely with NTU’s industry partners in developing capability aligned with the technology needs of the companies in the area of power engineering.

Requirements

Candidates with the following qualifications are encouraged to apply:

• A relevant PhD from a reputable university
• Extensive research and teaching experience in power engineering (for tenured appointment)
• Successful track record of academic/research leadership and team building
• Experience in cross-disciplinary research initiatives and collaboration
• Well-developed understanding of the priorities, operation and strategies of relevant funding bodies
• History of successful training and development of early career researchers and/or PhD students
• Strong network and ties with renowned international entities and organisations
• Internationally acclaimed with presentations such as keynote addresses at flagship conferences and prestigious journal publications.

Application

Applicants are invited to submit their applications (cover letter, CV, research and teaching statements, and citation report, where applicable) through the NTU career portal.

Review of applications and shortlisting decision will be on an on-going basis until the position is filled. Only shortlisted candidates will be notified.

Roles & Responsibilities

Driver - Responsibilities

The work scope for the above job title is as but not limited to the following:

1 The main task of the Driver is to drive the Company lorry to pick up workers, to or from site, office and dormitory etc.

1.1 The Driver must drive the vehicles to the required work sites punctually.

1.2 The Driver must follow the schedule or ad-hoc obtained from the Supervisors and Co-ordinator. The Driver must inform the parties involved if there are any clashes in schedule before proceeding.

1.3 The Driver must inform the Supervisors and Co-ordinator as soon as possible if he is delayed in his schedule. This will enable them to plan their resources efficiently.

1.4 Aside from driving the workers to site, rest of the time will be to support office courier needs.

2 Usage of Company vehicles

2.1 The Driver is to switch off the ignition completely and remove the key when the vehicle is parked and not in use. The Driver must not leave the vehicle in idle mode while waiting.

2.2 The Driver must understand that the Company’s vehicles and attached cash cards are solely to be for Company use. Otherwise, costs will not be reimbursed.

3 Safety

3.1 The Driver must drive and operate the vehicles in a safe manner in accordance to local laws.

3.2 If there are loads on the vehicles, the Driver must ensure the loads are properly secured in accordance with local laws and regulations.

3.3 The Driver must inform the Director or PIC immediately that he is involved in an accident while driving or operating the vehicle. This includes causing damage to third party property.

3.4 The Driver should understand that if the accident is caused by the Driver’s negligence, the Company is entitled to pursue part or all of the claims from him.

3.5 The Driver should also understand if he incurs any traffic offences due to his own negligence, the Company is entitled to pursue part or all of the claims from him.

4 Servicing and Maintenance

4.1 The Driver is to inform the Company if any of the vehicles are unsafe to operate and require repairs. The Driver must not operate the vehicles in such situation.

4.2 The Driver will drive the vehicle to the Company appointed workshop for servicing and maintenance. The Driver will also pick up the vehicle when servicing and maintenance is completed.

4.3 The Driver will drive the vehicles to Inspection Centres as required.

The above is an overview of the work scope and responsibilities of a Driver employed by the Company. It is by no means an exhaustive list. There may be other scope and responsibilities deemed normal by the industry which by default will be included in this Appendix.

Schedule:

Day shift: 5.5 days per week

Requirement:

1. Minimum Class 3 Singapore Driver's license

2. Familiar with the marine industry procedures

3. Good driving track record

4. Familiarity with Singapore roads and ERP time

5. This job may require some late work. OT allowance will be given.

6. Fit and in good health

1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

• Develop a growth strategy focused both on financial gain and customer satisfaction
• Conduct research to identify new markets and customer needs
• Arrange business meetings with prospective clients
• Promote the company’s products/services addressing or predicting clients’ objectives
• Prepare sales contracts ensuring adherence to law-established rules and guidelines
• Keep records of sales, revenue, invoices etc.
• Provide trustworthy feedback and after-sales support
• Build long-term relationships with new and existing customers
• Develop entry level staff into valuable salespeople

Project Design & Engineering Calculations and Proposal drawings to Client Management.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as per Equipment sample or Site measurement studies

Analyse sub-contractor proposals, design and calculation feasibility study.

Coordinate with Government and various agencies.

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Manpower planning, deployment and control and on-time schedule.

Coordinate to resolve engineering and construction issues and manage the schedule.

Safety mindset and ability to develop RA and permit to work application.

Maintain proper project documentation and ensure accuracy of all design submissions to comply with project specifications and clients’ requirements.

Monitoring of site activities, material requisition, cost control, project supervision and schedule of works

Ensure that works are executed within an acceptable standard of workmanship and in line with safety procedures

Understand and ensure compliance in project requirement and scope of work

Issuing of material requisition form, assist in purchasing materials/items required by production/customers, prepare marketing material & etc.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Any adhoc duties as assigned by management.

Min 3-5 years’ of experience in Engineering mfg, Recycling, Oil & Gas and Chemical plant industry.

Applicable for Only Singaporeans & PR's.

Role Overview:

We are seeking an experienced QA Engineer with a strong background in the oil and gas sector, specifically in FPSO projects. The QA Engineer will be responsible for ensuring that all quality assurance and quality control procedures are in place, adhered to, and continuously improved throughout the project lifecycle.

Key Responsibilities:

1. Quality Management System (QMS):
   Develop, implement, and maintain the project-specific Quality Management System in alignment with ISO standards.
   Ensure compliance with company policies, client requirements, and regulatory standards.
2. Project QA Oversight:
   Conduct regular quality audits, inspections, and surveillance activities on FPSO project sites.
   Identify and document non-conformances, and lead the resolution process to prevent recurrence.
   Ensure that all QA documentation is properly maintained and accessible.
3. Supplier and Vendor Quality Control:
   Review and approve vendor QA/QC documentation.
   Conduct supplier audits to ensure compliance with project quality requirements.
   Coordinate with procurement teams to ensure that materials and equipment meet quality specifications.
4. Engineering & Fabrication Quality Assurance:
   Ensure that engineering designs, drawings, and specifications comply with quality requirements.
   Monitor fabrication and construction activities to ensure they are carried out according to approved procedures and quality standards.
5. Testing & Commissioning:
   Oversee testing and commissioning processes to ensure systems meet quality standards before handover.
   Verify that all test procedures and results are properly documented.
6. Risk Management:
   Identify potential quality risks and implement mitigating measures.
   Participate in risk assessments and HSE (Health, Safety, and Environment) meetings.
7. Training and Continuous Improvement:
   Provide training to project teams on quality processes and best practices.
   Promote a culture of continuous improvement by identifying opportunities for process optimization.

Qualifications:

• Bachelor’s degree in Engineering, Quality Management, or a related field.
• Minimum of 5 years of experience in a QA role within the oil and gas industry, with specific experience in FPSO projects.
• In-depth knowledge of quality management systems (e.g., ISO 9001) and industry standards.
• Strong understanding of fabrication, construction, and commissioning processes for FPSOs.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership skills.
• Certification in quality auditing (e.g., ISO 9001 Lead Auditor) is an advantage.

Key Responsibilities:

1.Financial Planning & Forecasting:

• Assist in the preparation of the annual budget and quarterly forecasts.
• Develop financial models to project future performance based on various scenarios.
• Monitor and analyze budget variances and provide explanations for discrepancies

2.Data Analysis & Reporting:

• Prepare monthly, quarterly, and annual financial reports for management.
• Analyze financial data to identify trends, risks, and opportunities.
• Create and maintain dashboards and key performance indicators (KPIs) for business units.

3.Business Partnering:

• Collaborate with department heads to understand their financial needs and provide support.
• Participate in strategic planning sessions and provide financial insights to guide decision-making.
• Assist in evaluating new business opportunities, investments, and projects.
• Participate in building specific FP&A business partnering capabilities such as Commercial Finance, Production Costing Finance, R&D Finance etc.

4.Ad Hoc Analysis:

• Conduct ad hoc financial analysis as requested by management.
• Support special projects and initiatives that require financial expertise.

5.Process Improvement:

• Identify opportunities for process improvements in financial reporting and analysis.
• Assist in the implementation of financial systems and tools to enhance efficiency.

Qualifications:

Education:

• Bachelor’s degree in Finance, Accounting, Economics, or a related field. A Master’s degree or professional certification (e.g., CFA, CPA) is a plus.

Experience:

• 3-5 years of experience in financial planning and analysis, corporate finance, or a related field.
• Experience in financial modeling and forecasting.

Skills:

• Strong analytical and problem-solving skills.
• Proficiency in Microsoft Excel and financial modelling software.
• Familiarity with financial reporting tools and ERP systems (e.g. Netsuites, BI).
• Excellent communication and presentation skills.

Personal Attributes:

• Detail-oriented with a strong commitment to accuracy.
• Ability to work independently and as part of a team.
• Strong organizational skills and the ability to manage multiple priorities.

Key Responsibilities:

• Data Entry & Conversion: Assist in ERP administrative conversion and data entry. Turn on Work Orders, PR/PO preparation, Job fulfilment, Process entry etc.
• Support Coordinators Task : Prepare drawing and prepare work process sheets. Help prepare shipment, include packing of goods.
• Administrative & Record Maintenance: Perform tasks such as scanning, filing, and prepare DO, while maintaining and updating jobs records to ensure consistency between physical and digital files.