Responsibilities:

• Perform maintenance of marine electrical system/component in workshops and onboard vessels
• Supervise any workers being assigned for jobs completion
• Perform corrective maintenance and planned maintenance
• Perform electrical wiring, cabling and modification of electrical circuit
• Test electrical systems and continuity of circuits in electrical wiring, equipment and fixtures, using testing devices such as Multimeter, Insulation tester and Process calibrator
• Participate in the repair of electrical components in workshop and onboard ships.

Requirements:

· NTC/Higher Nitec in Electrical Engineering and related field.

· Preferably with at least 4-5 years working experience in electrical repairs and maintenance.

· Able to read electrical circuit drawings.

· Preferably to have experience in DC/AC motors, Generators, Switchboards and Circuit breakers.

· Experience in testing and calibration of high/low voltage equipment or fault analysis

· Able to perform troubleshooting and fault rectification during daily operations

· Positive-attitude and have initiative to perform all tasks being assigned

· Willing to work in outdoor condition e.g heat, oil and dust

· Willing to work in Changi area

· Only Singapore Citizens need apply

Other Information:

· Location: Changi

· Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT

· 5 days work week

· Working Hours: 7.45am-5pm

1. Able to read and understand technical drawings.
2. Must able to do Mitutoyo CMM Programming and Operation.
3. Ensure incoming materials, in-process production and finished products meet by confirm specifications requirements; conducting visual and measurement tests.
4. Follow up corrective actions in production
5. Documents inspection results by completing reports and logs; inputting data into quality database.
6. Able to perform final inspection report for finished products and prepare relevant documents to customer.
7. Evaluate and analyze customers rejections, implement and feedback corrective action.

• At least 5 years' experience in Quality Control
• Basic Computer knowledge to prepare Quality Documents Report
• Able to speak, write and read simple English
• Able to work independently with minimum supervision

Job Description:

• Able to read & interpret tender specifications/ drawings.
• Good knowledge of contract and QS procedures and pricing.
• Responsible for the preparation of a complete mechanical (Air Conditioning and Mechanical Ventilation) tender, including tabulate pricing, sourcing of supplier, BQ takeoff and Value Engineering, etc.
• Responsible for collating tender documents for submission.
• Perform administrative duties assigned.

Job Requirements:

• Diploma/ Degree in Mechanical Engineering.
• Minimum 3 years' relevant experience with proven track record.
• Interdependent with good communication skills.
• Must possess good working attitude with self-motivation and commitment.
• Possess competency in using Word, Excel, PDF converter, etc.
• Training provided for entry level candidates.

Responsibilities:

• Assist Engineer in coordinating and supervising maintenance and overhauling jobs
• Prepare Job Acceptance on completion of Jobs
• Monitor and update job status daily.
• Supervise mechanical / diesel / air-conditioning works
• Liaise with customers and contractors on works to be carried out
• Arrange for inspection / job acceptance
• Carry out general repair and maintenance jobs onboard vessels or in workshops
• Dismantle and troubleshoot for mechanical defects
• Perform testing of equipment to ensure smooth operation
• Perform test run and report to superior on the job completion status

Requirements:

• NTC in Mechanical/Marine/Automotive related field.
• Physically fit with good eyesight
• Possess basic understanding of basic components and functions of mechanical engines or diesel engines
• Able to use IMTE tools such as micrometer, bore gauge and torque wrench
• Able to read simple drawings and service reports
• Possess man management experience for up to 5 technicians
• Willing to work under outdoor environment on site
• Basic working knowledge in MS Word and Excel for status and reporting purpose
• Willing to work in Changi area, with company transport provided

Other Information:

• Location: Changi
• Transport provided at: Jurong West & East, Jalan Bahar, Choa Chu Kang MRT, Bukit Panjang, Woodlands MRT, Bukit Merah, Sengkang, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Job Description:-

• Assist in managing the overall project from concept to completion, including support in planning, scheduling, budgeting, and coordinating with stakeholders, while following the Project Quality Plan, Safety Management Plan, and Building Execution Plan.
• Assist in the preparation and management of project documentation, including drawings, specifications, and weekly progress reports.
• Work with design engineers for as-built drawings, section drawings.
• Supervise and monitor workers / welders on site for installation or maintenance.
• attend site meetings with clients / architects and authorities on project technical matters.

Requirements:-

• Minmum Diploma in either mechanical, Electrical or Construction Engineering or other relevant discipline.
• Required skill(s), MS Office, MS Project AutoCad.
• Has work experience in construction sites.
• Responsible team player with the ability to work independently in challenging projects and timelines.

Roles & Responsibilities

Driver - Responsibilities

The work scope for the above job title is as but not limited to the following:

1 The main task of the Driver is to drive the Company lorry to pick up workers, to or from site, office and dormitory etc.

1.1 The Driver must drive the vehicles to the required work sites punctually.

1.2 The Driver must follow the schedule or ad-hoc obtained from the Supervisors and Co-ordinator. The Driver must inform the parties involved if there are any clashes in schedule before proceeding.

1.3 The Driver must inform the Supervisors and Co-ordinator as soon as possible if he is delayed in his schedule. This will enable them to plan their resources efficiently.

1.4 Aside from driving the workers to site, rest of the time will be to support office courier needs.

2 Usage of Company vehicles

2.1 The Driver is to switch off the ignition completely and remove the key when the vehicle is parked and not in use. The Driver must not leave the vehicle in idle mode while waiting.

2.2 The Driver must understand that the Company’s vehicles and attached cash cards are solely to be for Company use. Otherwise, costs will not be reimbursed.

3 Safety

3.1 The Driver must drive and operate the vehicles in a safe manner in accordance to local laws.

3.2 If there are loads on the vehicles, the Driver must ensure the loads are properly secured in accordance with local laws and regulations.

3.3 The Driver must inform the Director or PIC immediately that he is involved in an accident while driving or operating the vehicle. This includes causing damage to third party property.

3.4 The Driver should understand that if the accident is caused by the Driver’s negligence, the Company is entitled to pursue part or all of the claims from him.

3.5 The Driver should also understand if he incurs any traffic offences due to his own negligence, the Company is entitled to pursue part or all of the claims from him.

4 Servicing and Maintenance

4.1 The Driver is to inform the Company if any of the vehicles are unsafe to operate and require repairs. The Driver must not operate the vehicles in such situation.

4.2 The Driver will drive the vehicle to the Company appointed workshop for servicing and maintenance. The Driver will also pick up the vehicle when servicing and maintenance is completed.

4.3 The Driver will drive the vehicles to Inspection Centres as required.

The above is an overview of the work scope and responsibilities of a Driver employed by the Company. It is by no means an exhaustive list. There may be other scope and responsibilities deemed normal by the industry which by default will be included in this Appendix.

Schedule:

Day shift: 5.5 days per week

Requirement:

1. Minimum Class 3 Singapore Driver's license

2. Familiar with the marine industry procedures

3. Good driving track record

4. Familiarity with Singapore roads and ERP time

5. This job may require some late work. OT allowance will be given.

6. Fit and in good health

1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

• Develop a growth strategy focused both on financial gain and customer satisfaction
• Conduct research to identify new markets and customer needs
• Arrange business meetings with prospective clients
• Promote the company’s products/services addressing or predicting clients’ objectives
• Prepare sales contracts ensuring adherence to law-established rules and guidelines
• Keep records of sales, revenue, invoices etc.
• Provide trustworthy feedback and after-sales support
• Build long-term relationships with new and existing customers
• Develop entry level staff into valuable salespeople

ROLE

 To bring in quality business and increase Company’s market share in the security industry.

RESPONSIBILITIES

 To achieve the sales target set by the company.

 Ensure payments are received; and settle any dispute that may arise.

 To handle yourself professionally so as to upkeep the image and prestige of the company.

 Provide on the ground support for sales team as they generate leads and close new deals.

 To communicate and ensure that the installation contractors and our project team are familiar with the requirements of the projects, and to see to it that the job is properly and professionally carried out.

 Develop plans for the sales team to acquire new customers or clients, through direct sales techniques, cold calling, and business to business marketing visits.

 Submit daily activity report to Sales Manager

 To attend daily meeting and provide updates

 To perform Technical work when required

 To perform research and development on new products

 Any other duties assigned by Head of Department

JOB RESPONSIBILITY

• Find tender opportunities GeBIZE.

• Prepare Tender and submission.

• Familiar with reinstatement and maintenance work.

• Review and analysis of Tenders Drawings & Documentation.

• Preparing Tender submissions and reviewing Procurement & Reviewing of Contracts, and ensuring compliance.

• Reviewing and commercial management of all projects, to ensure accurate and reliable reporting.

• Review all incoming correspondence from Clients, Consultants & Design Team to identify contractually critical items and to initiate replies.

• Estimating a range of projects in a variety of sectors.

• Improve and implement best practice commercial processes and accurate budgeting.

• Maintain accurate records and provide necessary detailed backup to support commercial tracking and costing.

• On Site measurement of Electrical Services.

• Preparation of specialist sub-contract work packages.

• Preparing monthly Commercial Progress reports.

• Other ad-hoc duties assigned by Construction Manager.

1. Plan, organise and manage WHS activities within the sites to cultivate good EHS practices.
2. Perform Risk Assessment and draft safework procedures with clients for submission before start of project
3. Conduct induction for new workers on in-house safety regulations
4. Conduct Risk Assessment and safework procedures briefing to the workers
5. Site inspection and conduct safety meeting
6. Report and investigate accidents and incidents at sites
7. Participate in internal audits and review of Safety Management System
8. Maintain HSE controls and process within Company’s policies and government’s regulations
9. Accident investigation and submit I-Report when necessary
10. Develop Emergency Response Plan for audits
11.Prepare forms to be implemented in the workplace such as safety checklist, RA forms etc.
12. Candidate must possess at least a post secondary Diploma with at least 6 years relevant construction project safety experience in singapore
13. must possess professional knowledge in Law and regulations (WSH Act and Environment)

Electrical PLC Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Use Siemens S7-400 PLC to do the HVAC System PLC program. Experience in CPU Redundancy, Modbus Communication Redundancy.
8. Use S7-1200 PLC to do the HVAC Control System PLC program
9. Use Siemens HMI software to do the Touch Screen Program.
10. Fully understood HVAC System D & ID, P & ID.
11. Marine and Offshore commissioning experience are required.
12. Sometimes will go to site trouble shooting.
13. Contact with client about the project requirement.
14. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Electrical Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Fully Understand PLC control system.
8. Fully understood HVAC System D & ID, P & ID.
9. Marine and Offshore commissioning experience are required.
10. Sometimes will go to site for trouble shooting.
11. Contact with client about the project requirement.
12. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

WE NEED EXPERICEND FOR METAL WOKS , ALUMINMUM WORKS , WETRADE WORKS AND TILES WORKS FOR CONSTRUCTION (HDB / CONDO ) , NEED HAVE EXCELLENT IN CHINESE AND ENGLISH COMMICATION SKLII AND ACKNOWLEGE DESIGN WORK ,NEED TO GO THROUGH WITH SITE COODINATOR FOR BQ AND MATERAILS ORDER AND DRWAING SUBMISSION WORKS ，ALLOW TO FOLLOW AND COORDINATE WITH SITE WORKS AND PROGRESS WITH MAINCON , SITE MEETING

1. Prepare and Tabulate the project budget for each material.

2. Do quantity take-off

3. Can do market analysis and quote invitation subcons and suppliers

4. Able to do calculation about Earthworks Excavation works

5. Can check actual work done and certify maincon payments

6. Able to prepare Bar Bending Schedule (BBS) , rebar and concrete fluctuation by base index and current index

7. Prepare quotation and progress claims for sub contract works, equipment rental and disposal.

8. Prepare Bill of Quantities and Cost Estimate

9. Must know how to use Autocadd 2D and 3D, Excel and Powerpoint

• Full spectrum of HR functions including Recruitment and Orientation & Training
• Payroll and IR8A submissions
• Work Pass and Man Year Entitlement applications
• Administration of employee profiles and movements such as promotion, secondment, resignation, dormitory
• Administration of incident records, medical insurance and work injury claims
• Submission of monthly HR reports to management
• Implementation of HR-related systems, policies and programmes
• Application of HR-related grants
• Participation in recruitment fairs
• Planning of company events
• Involved in annual ISO and external audit
• Undertake additional tasks and responsibilities when required or as instructed

Pre & post contract Quantity Surveying Works such as:-

1. Taking off quantities.
2. Tendering of projects.
3. Sourcing of sub-contractors, suppliers and materials.
4. Progress payment and claims.
5. Contract administration.
6. Variations
7. Final accounts

Degree or diploma in Building, Quantity surveying or equivalent with at least 3years working experience with main contractor in private residential projects.

• Design and prepare AutoCAD drawings based on AutoCAD standards.
• Review and incorporate design details from Coordinated Combined Services Model.
• (CCSM) into Combined Serviced Design (CSD) drawings.
• Work with design and construction team to prepare drawing and relevant documents for submission.

Minimum Requirements:

• Degree/Diploma in Civil/Mechanical/Electrical Engineering.
• At least 2 year relevant experience.
• Experienced in Microstation software to prepare computer-aided drawings.
• Able to work independently in a fast-paced environment.

• Plan, organize, direct and run optimum day-to-day operations of the facility.
• Be responsible for the overall maintenance and repair works of the plant equipment.
• Submission of documentation following preventive maintenance
• Minimal downtime of company’s/ client machinery and equipment
• Inspection of facility equipment
• At least 1 years or more of relevant experience in crane manufacturing industry or related
• Able to multi task & able to develop improvement plans
• Hardworking, committed & independent
• Team player & self-starting individual

ENGINEER/ASST ENGINEER FOR DESIGNER

- O' LEVEL/ITE/DIPLOMA GRADUATE

- HAVE INTEREST IN AUTOMATED SYSTEM DESIGN

- INNOVATIVE MIND SET AND ABILITY TO WORK INDEPENDENTLY

- KNOWLEDGE OF INVENTOR/SOLID WORKS AND 3D SOFTWARE REQUIRED

- AT LEAST 1-2 YEAR WORKING EXPERIENCE WITH AUTOMATION FACTORY

- DESIGN AND DEVELOP MECHANICAL SOLUTIONS FOR FACTORY AUTOMATION

Key Roles and Responsibilities

• Assist the Site Project manager in monitoring and managing the day-to-day operation of the projects.
• To support Site Project Manager in managing day-to-day clients’ interactions and expectations for optimal results
• To support Site Project Manager to collaborate with peers, liaise with trade contractors, clients and consultants and ensure timely delivery of quality services.
• To prepare and submit method of statement, sketches, site record and other technical submissions in a timely manner.
• To prepare Inspection and Test Plan, user manuals, drawings and conduct inspection and check on works performed.
• Check the drawings discrepancies and conduct field verification, and submit technical clarification to the clients and consultants.
• Ensure updated drawings including shop drawings are used by the site team in a timely manner.
• Assist the Project Manager in the preparation of reports and presentation to management, clients and stakeholders.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act
• Perform any other tasks as and when required so as to meet project milestones

Requirements

• Min Diploma or Higher Nitec in Mechatronics/Electrical/Electronic Engineering or relevant with at least 3 years working experience
• Hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must
• Hands-on experience in security system configuration, System Networking and integration with third-party systems will be an advantage
• Willing to take ownership and Pro-active in Problem solving
• Must be a team player and strong verbal and written communication skills
• Customer service and business orientated with good initiative and adaptability
• Required to perform standby duties whenever required
• Driving License – Preferably if candidate possesses its own vehicle
• Singapore Citizens are preferred
• Location is at Shan Road / Site Office
• 5.5 work days

First 3 months probation $2600, after confirmation $2700-$2800 depends performance

Industry: Engineering

Located at Tuas

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Responsibilities:

• Drive e-commerce growth by developing onsite sales and engagement campaigns
• Provide analysis & performance reports including daily, weekly, and monthly, reporting of KPIs and recommending changes to improve performance as to achieve results.
• Drive digital planning, adaptive marketing and agile practices that best engages the consumers.
• Manage and constantly improve on the development and implementation of all e-commerce sites managed by the Company, including own e-commerce, marketplaces (Lazada, Amazon) and 3rd-party retailer sites.
• Create and execute digital marketing campaigns to increase site sales performance
• Optimized UX/UI to improve user experience and increase sales conversion.
• Explore new e-commerce features to capture the latest and newest trend of consumer behavior.
• Work with external and internal stakeholders to develop and execute optimization for product and brand content.
• Define and develop KPI framework to measure and track KPIs and ensure growth effectiveness.
• Evaluate e-commerce campaign and spend effectiveness to ensure positive ROI and recommend data driven learnings for future campaigns
• Manage the e-commerce team and being responsible for the day-to-day operations aspects of the e-commerce platform including but not limited to user experience, order fulfilment, customer service and content creation.
• Review the e-commerce team resources for skills training, career advancement and recruitment.
• Manage off-shore Customer Care / e-commerce support officer who oversee responding to customer inquiries on live-chat and emails.

Requirements:

• Possess degree in Business Administration or equivalent.
• At least 5 years of proven experience in related field, of which 2 years is of managerial capacity.
• Prior experience in digital marketing strategy.
• Proficient in SEO, Woocommerce, Shopify, Wordpress.
• Solid knowledge of web analytics tools like Google Analytics.
• Ability to handle a small team.
• Self-driven and motivated.

Need to have engineering knowledge, comprehension of technical documents. Excellent written and spoken communication skills • Possess troubleshooting skills in engineering works • Proven leadership skills with a large and diverse workforce o Be able to work in a fast-moving environment, under pressure and long working hours, when needed.

We are looking for an energetic, trustworthy, and self-starter candidate who could be handy in paperwork preparation and supervision at the worksite, overseeing projects, maintaining safety protocols, and implementing site procedures. Our ideal candidate is experienced, responsible, and team-focused.

Job Description:

- Prepare weekly reports on vehicle repair status.

- Assist in writing meeting minutes to track outstanding issues.

- Conduct team briefings before starting work.

- Coordinate and manage team assignments and vehicle parking allocation.

- Plan and monitor vehicle sequencing and status for operational tasks.

- Provide documentation support to the Operations Leader for work-related needs.

Job Requirements:

- Degree in Engineering (Mechanical, Electrical, Hydraulic, Automotive, Electrical & Electronics, Mechatronics) or a Diploma in a related field with 5 years of relevant industry experience.

- Strong team player.

- Ability to lead a team effectively.

• Preparing reports: Accounting assistants prepare financial statements, budgets, and other reports.
• Bank reconciliations: Accounts assistants reconcile accounts and expenditures.
• Handling communication with clients: Accounting assistants communicate with clients and vendors about billing and payments. They follow up on money owed and answer questions about bills.
• Payroll: Accounting assistants track hours, calculate deductions, and manage funds withheld for taxes.
• Processing invoices and payments: Accounting assistants prepare and process invoices and payments.
• Assisting in audits: Accounting assistants may assist with audits.
• Maintaining financial records: Accounting assistants maintain financial records and update procedural documentation.
• Working with spreadsheets: Accounting assistants work with spreadsheets, sales and purchase ledgers, and journals.
• Recording and filing cash transactions: Accounting assistants record and file cash transactions.
• Controlling credit and chasing debt: Accounting assistants control credit and chase debt.
• Liaising with third party providers, clients, and suppliers: Accounting assistants liaise with third party
• Handle partial sets of accounts, including Accounts Payable (AP) and Accounts Receivable (AR).
• Ensure timely recording of creditor invoices and payment transactions and follow up with billings and cheque collections.
• Input daily and monthly sales reports.
• Accounting Assiatant need to submit CPF constributions.
• Retrieve and resend invoices, credit notes, and statements of accounts.
• Participate in cash flow calculations and preparation.
• Accounting Assiatant need to follow up company auditor.
• Perform weekly and monthly bank reconciliations.
• Provide administrative support as required.
• Accounting Assiatant assist prepare GST fillings and records.
• Maintain Project Quotation, PO, WO, LOA Signed documents.
• providers, clients, and suppliers.
• Suppliers Agreements prepare and keep records
• Accounting Assistant need to prepare Monthly Invoice for Suppliers
• Maintain Workers Loan List
• OED Survey Need to submit.
• Accounting Assistant need to handle Small Claims Follow-Up Details.
• Checking and responding to emails on daily basis to get updated on the work
• Being consistent, accurate, and great in minimizing errors
• Support audit and tax queries
• Liaise with banks on banking transactions