Project Supervisor will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. To perform any other duties & Responsibilities assigned by superiors from time to time.

5. Ability to demonstrate and implement cost -saving measures.

6. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

• Required load and upload material,etc
• Maintain Material movement record
• To comply with LTA road safety and traffic regulation and site safety.
• To conduct daily check to ensure vehicle is in good and safe condition/upkeeping of vehicle.
• Valid class 4 driving license and lorry crane operator.
• Preferably able to start work within short notice.

• Posting of recruitment advertisements
• Engagement with both internal and external stakeholders such as employees and vendors, etc
• Manage office sundry purchases
• Payroll administration
• Assists in employment contract renewals
• Coordinate medical arrangement for foreign employees (medical check-ups for work pass, and vaccination)
• Ensure complete, up-to-date, accurate and accessible records are kept for all employees.
• Assists in the co-ordination of social and recreational activities to promote the general welfare of all employees
• Performs HR data entry relating to employee's information, training records, etc.
• Manage and route phone calls appropriately
• Assists in work pass applications and other immigration related work.
• Prepare and submit government bodies and statutory board related surveys.

• Posting of recruitment advertisements
• Engagement with both internal and external stakeholders such as employees and vendors, etc
• Manage office sundry purchases
• Payroll administration
• Assists in employment contract renewals
• Coordinate medical arrangement for foreign employees (medical check-ups for work pass, and vaccination)
• Ensure complete, up-to-date, accurate and accessible records are kept for all employees.
• Assists in the co-ordination of social and recreational activities to promote the general welfare of all employees
• Performs HR data entry relating to employee's information, training records, etc.
• Manage and route phone calls appropriately
• Assists in work pass applications and other immigration related work.
• Prepare and submit government bodies and statutory board related surveys.

Production Supervisor will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. To perform any other duties & Responsibilities assigned by superiors from time to time.

5. Ability to demonstrate and implement cost -saving measures.

6. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

• General administrative task & support
• Handling accounts receivable & accounts payable
• Handling general Accounting Tasks
• Administering payroll & maintaining employee records
• Handle MOM matters including work pass application / renewal / cancellation
• Workers dormitory arrangement.
• Coordinate with training & Development.
• Administer leave / MC records.
• Monthly CPF submission.
• Prepare employment letter, confirmation letter, warning letter, etc.
• Support admin function for purchasing, report typing and invoicing.
• Licence renewal & preparation of documents for submission.
• Prossess good organization, communication and people's skills
• Any ad-hoc HR & admin duties assigned.

· Develope a marketing strategy in accordance with the overall company goals and vision

· Understanding Company Products and doing Market Research to identify specific target groups and implement niche marketing strategies

· Grow the social media community

· Implement and manage a multi-channel marketing strategy

· Grow online marketing partners (digital publications or influencers)

· Copywriting and copy editing - Both internal and external marketing materials

· Create and execute highly engaging, Skills and experience in creative content writing

· Cross-platform social media & marketing campaigns (design, call to action and content)

· Manage content - copywriting & design. Handle content schedule and posting of content

· Experience in attaining PR coverage both online and offline

· Simple research work

· Assisting with ad hoc duties as required

Requirements:

· Social media analytics and ads experience is preferred. Social media management and community managers preferred.

· Exceptional communication skills, both written and verbal. Strong written English is a MUST

· Ability to multitask and meet tight deadlines

• General administrative task & support
• Handling accounts receivable & accounts payable
• Handling general Accounting Tasks
• Administering payroll & maintaining employee records
• Handle MOM matters including work pass application / renewal / cancellation
• Workers dormitory arrangement.
• Coordinate with training & Development.
• Administer leave / MC records.
• Monthly CPF submission.
• Prepare employment letter, confirmation letter, warning letter, etc.
• Support admin function for purchasing, report typing and invoicing.
• Licence renewal & preparation of documents for submission.
• Prossess good organization, communication and people's skills
• Any ad-hoc HR & admin duties assigned.

Production Supervisor will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.
2. Good communication skills with Ship Owners and Superindents.
3. Good time Management and work Independently.
4. To perform any other duties & Responsibilities assigned by superiors from time to time.
5. Ability to demonstrate and implement cost -saving measures.
6. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

Production Supervisor will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.
2. Good communication skills with Ship Owners and Superindents.
3. Good time Management and work Independently.
4. To perform any other duties & Responsibilities assigned by superiors from time to time.
5. Ability to demonstrate and implement cost -saving measures.
6. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

Fill requisitions, work orders, or requests for materials, tools, or other stock items

• Prepares orders by processing requests and supply orders; packing boxes; placing orders in delivery area.

• Verify that the goods are intact and report any defects.

• Perform inventory controls and keep quality standards high for audits.

• Completes deliveries by driving truck or van to and from vendors.

• Maintains inventory controls by collecting stock location orders.

• Conduct weekly cycle counts.

• Maintains quality service by following organization standards.

1. Responsible for all phases of planning and execution of project or may be responsible for a segment of a larger project
2. Has responsibility for day to day coordination activities with the engineering team ensures successful communication of project issues and resolution
3. B.S. or equivalent Degree in Engineering from an accredited university with relevant experience in oil/gas industry offshore projects
4. Have the experience in supporting Project Engineering Manager in planning, organizing, coordinating, and controlling project in accordance with the established policies, procedures, systems, and requirements
5. Requires demonstrated ability in supporting engineering effort for major projects in major oil and gas companies in-house or as part of Engineering Contractor’s team
6. Possesses knowledge of the respective industry.

Position Overview: We are seeking a detail-oriented and patient individual to join our team as a Accountant Assistant. This role is ideal for someone with basic financial knowledge and a strong sense of responsibility. Proficiency in Chinese (Mandarin) is required for this position.

Key Responsibilities

----Reconciliation & Transactions:

• Perform daily, weekly, and monthly reconciliations of cash and bank accounts.
• Identify and resolve discrepancies in financial records and bank accounts.
• Ensure all transactions are recorded accurately and in a timely manner.
• Assist in maintaining and updating financial records and documentation
• 
  
• ----Administrative Support:
  • Provide support to the finance team in preparing reports and documents.
  • Assist in filing and organizing financial paperwork.
  • 
    
  • ----Compliance:
  • Ensure compliance with company policies and financial regulations.
  • Maintain confidentiality of financial information.

Qualifications:

• Basic knowledge of finance or accounting principles.
• 1-2 years of relevant administrative work experience.
• Strong attention to detail and a high level of accuracy.
• Patience and the ability to work under pressure.
• Proficiency in Chinese (Mandarin) is required.
• Previous experience in an accountant/ casher or finance-related role is a plus.
• Good communication and interpersonal skills.

1. Manage the team of RTOs, supervision of site set up, earth works, drainage works and reinstatement works

2. Report to Qualified Person

3. Prepare weekly reports and monthly reports.

4. Attend the meeting with client and consultants

5. Report any non-compliances to Qualified Person

6. Ensure the site Safety

. QAQC Inspector (Fabrication /Welding)

Responsibilities:

• Preparing or establishing that a welding procedure is available, has been approved as

required by the appropriate authority and is being employed in production.

• Witnessing of welder and procedure approval tests that including of the preparation of test

pieces and destructive tests and verifying compliance with appropriate standards and

specifications.

• Verification that adequate and valid welder approvals are available, and that only approved

welders as required are used in production.

• Interpretation of weld drawings and weld symbols.

• Performing of visual inspection and ensure that all finished goods are checked and approved

prior to any delivery of handover.

• Verification that post weld heat treatment has been conducted in accordance with

specification requirements.

• Appreciation of the factors influencing the formation of weld defects and their acceptability

in relation to the written specification.

• Coordination with QC Inspector (Hull/Structure and Piping) and NDT Coordinator, to verify

and ensure that all finished welds are checked and approved prior to any delivery of

handover.

• Ensure that quality assurance standards and procedures are maintained.

• Ensure that reports that are required are completed accordingly to the project

specifications.

• Liaise with Contractor, Production and Client’s representative to ensure the product is

checked and complied with the project quality plan and specifications.

• Perform any other tasks as may be assigned by the supervisor.

• Ensure compliance to relevant government regulations and company’s quality, safety, health

and environmental (QSHE) policies, practices and procedures at all times.

Requirements:

• Minimum Diploma in Engineering or relevant field of International certification (e.g. AWSCWI or CSWIP 3.1 WI).

• Physically fit since some of tasks require lifting of some equipment.

• A team player with the ability to work independently as well as in a team

• Good communication skills, meticulous, resourceful, able to multi-task

• Computer literary (MS. Office).

As an Air Conditioning Repair & Servicing Technician, your main duties is to service, troubleshoot and repair air conditioning systems to ensure optimal performance and indoor air quality. This role involves diagnosing issues, performing repairs, and conducting routine maintenance to enhance system efficiency and customer satisfaction.

Job Description:

• Collect the spare parts from the warehouse store based on the daily job indicated on the tablet.
• Troubleshoot and resolve issues on malfunctioned HVAC systems.
• Wash and clean all dismantled parts to improve efficiency and air quality.
• Refill refrigerants by replenishing and fixing leaks as needed.
• Communicate with clients with regards to problems in equipment and post-jobs reports.
• Ensure safe-keeping of hand tools and maintain good housekeeping.
• Must wear personal protective equipment (PPE) when necessary (e.g. googles, earplugs, respirators, safety harnesses, safety shoes, helmets, sunscreen).
• Ensure all works are carried out safely in accordance with safety procedures and practicing of Workplace Safety and Health (WSH) Act.
• Provide technical advice and assistance on all maintenance functions.
• Prepare service reports after every completed job for customer's endorsement.
• Handle any ad-hoc projects and duties assigned by reporting manager and/or management.

Job Requirements:

• Possess a Singapore Class 3 license will be an added advantage.
• Minimum Nitec / NTC 2 or 3 certificates in Electrical, Mechanical or Electronic field.
• At least 1 year of working experience in the related field; with maintenance experience in HVAC, refrigeration & M&E systems.
• Positive attitude, good interpersonal & customer-centric skills.
• Experience in air-conditioning repair & maintenance.
• Strong knowledge/experience in HVAC or ACMV systems for residential or commercial sectors.
• Ability to work independently and collaboratively in a team.
• No experience is also welcome to join as apprentice.

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Description

• Coordinated with client, engineers, technicians and provided necessary support for process and Safety groups
• Electrical and instrumentation installation work, wiring and terminations.
• Preparation of Electrical and instrument QA/QC documents.
• Performing loop check, safety interlock functioning test.
• Performing the site testing and commissioning of field Instruments.
• Perform Instrument construction, testing, commissioning work. Preparation of punch list and ensure all the punch list items are rectified before client Final Acceptance.
• Preparation of Electrical & Instrument Index, Instrument IO lists, Instruments datasheets/specifications against the P&ID for the proper construction activities.
• Attend emergency site issues and response to site within service level of agreement

Requirements:

• Diploma/Degree in Electrical/Electronic Engineering
• Relevant experience in Pharma, oil & Gas industry of at least 8-12 year.
• Possess basic safety & health experience and computer skills
• Resourceful, earnest, good team player, meticulous and responsible
• Self-motivated,able to multitask
• Good communication and interpersonal skills, ability to liaise with all levels of people
• Good knowledge of local industry
• Good fundamentals of electrical safety and area classifications.
• Good knowledge of Ingress Protection and explosion prof equipment.

Min Qualifications / Experience :

Bachelor Degree in Mechanical Engineering with minimum 3 years relevant experience

Job Skills Required :

Mechanical design of pressure vessels, heat exchagers & atmospheric storage tanks. Thermal design of heat exchangers is also a required skill.

Familiar with international design codes such as ASME, British, Australian & European Codes, Tema, API650 & etc.

Proficient in design software such as PVELite, NozzlePro, StaadPro & Autocad.

Duties & Responsibilities

The duties and responsibilities are:

a) Responsible for the formulation of schedules and datelines for design and date of submission.

b) Check detailed design and drawings based on relevant codes and client specifications, while ensuring the most cost efficient methods of design are used.

c) Liaise and co-ordinate with Project Department to obtain relevant information for detailed design.

d) Determine the conditions and study all pertaining data thoroughly and accurately for a design. Many different combinations of loadings are possible and the most probable combination of simultaneous load for an economical and safe design is selected.

e) Control and issue all technical documents.

f) Any adhoc project assigned by Design Manager.

• Perform installation of HVAC related equipment following company policies and manufacturer’s specifications
• Carry out wiring of both low and line voltage to cooling and heating equipment
• Perform installation of copper refrigerant lines to air conditioning units, including brazing and soldering
• Perform installation of flex and sheet metal duct systems in light commercial and residential buildings
• Ensure connection of gas lines to heating equipment is properly done
• Determine the right material needed for installation work by pre-measuring jobs
• Receive all materials and equipment required for each job, confirm and load them into company vehicle
• Provide necessary support to other team members to be able to complete tasks on time as instructed by management.

Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

Join Our Team at the Asian School of the Environment (ASE), Nanyang Technological University, Singapore

The Asian School of the Environment (ASE) at Nanyang Technological University is a diverse school focusing on the connections between geosciences, ecology, society and Earth systems. Our approach integrates these disciplines to examine big environmental challenges both in Southeast Asia and globally. We conduct cutting-edge research on topics that include ecology, geohazards, climate change, sea-level rise, environmental sustainability, conservation of environment and biodiversity, and interactions between environment and society. ASE is currently looking for a candidate to join them as a Research Assistant.

Key Responsibilities:

• Seeking research assistant to investigate the impacts of various area-based conservation measures (e.g. REDD+ projects and protected areas) on tropical forests around the world
• Contribute to a better understanding of market- and non-market based conservation measures through data collection, analysis, and dissemination of findings
• Role will involve acquisition and processing of spatial data, statistical analyses, report writing and manuscript preparation and provision of administrative support on research-related matters
• Support the development of policy-relevant and multidisciplinary conservation research

Job Requirements:

• Bachelor’s degree in natural science, climate science, geography, data science, engineering, or a related field is mandatory.
• Proficient with the collecting, processing and analysis of geospatial data.
• Prior experience with causal inference approach is preferred
• Competent in statistical analyses and data visualisation tools.
• Skills with coding/scripting using R and/or Python programming languages.
• Strong organisational and problem-solving skills, with meticulous attention to detail.
• Highly self-motivated and independent with the ability to collaborate effectively as part of a multidisciplinary team.

ASE seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status, family responsibilities, or disability. Interested applicants should submit a CV and a statement of interests. Evaluation of application starts immediately until the position is filled.

We regret to inform that only shortlisted candidates will be notified.

We are seeking a Research Engineer to join a university-level research centre collaborating with industry. The position is for one year, renewable subject to satisfactory performance. Successful candidates will be involved in a project that is related to generative design.

Key Responsibilities:

• Deploy, optimize, and integrate generative AI models onto edge devices, ensuring efficient performance in real-world applications.
• Develop robust pipelines and frameworks for AI model inference on edge platforms, considering hardware constraints and latency requirements.
• Optimize AI models for power efficiency, memory footprint, and computational speed, utilizing techniques like quantization, pruning, and model distillation.
• Conduct thorough testing, debugging, and performance validation of deployed models under various real-world conditions.
• Work closely with researchers, data scientists, and software engineers to bridge the gap between research prototypes and deployable solutions.

Job Requirements:

• Master’s degree or above in Computer Science, Electrical Engineering, Artificial Intelligence, or a related discipline.
• Bachelor’s degree holders with relevant industry experience are also encouraged to apply.
• Strong background in machine learning and deep learning, particularly in generative AI models.
• Proficiency with relevant programming languages and frameworks such as Go, Python, C++, and CUDA.

Additional Criteria:

• Industrial experience in relevant areas such as AI deployment, edge computing, or R&D is desirable.
• Ability to work independently with limited supervision and collaborate effectively within a multidisciplinary team.
• Strong problem-solving skills and the ability to adapt to hardware constraints and real-world challenges.
• Familiarity with edge computing platforms (e.g., NVIDIA Jetson, ARM Cortex, and mobile chipsets) and related tools.

We regret that only shortlisted candidates will be notified.

We are seeking a Research Engineer to join a university-level research centre collaborating with industry. The position is for one year, renewable subject to satisfactory performance. Successful candidates will be involved in a project that is related to generative design.

Key Responsibilities:

• Deploy, optimize, and integrate generative AI models onto edge devices, ensuring efficient performance in real-world applications.
• Develop robust pipelines and frameworks for AI model inference on edge platforms, considering hardware constraints and latency requirements.
• Optimize AI models for power efficiency, memory footprint, and computational speed, utilizing techniques like quantization, pruning, and model distillation.
• Conduct thorough testing, debugging, and performance validation of deployed models under various real-world conditions.
• Work closely with researchers, data scientists, and software engineers to bridge the gap between research prototypes and deployable solutions.

Job Requirements:

• Master’s degree or above in Computer Science, Electrical Engineering, Artificial Intelligence, or a related discipline.
• Bachelor’s degree holders with relevant industry experience are also encouraged to apply.
• Strong background in machine learning and deep learning, particularly in generative AI models.
• Proficiency with relevant programming languages and frameworks such as Go, Python, C++, and CUDA.

Additional Criteria:

• Industrial experience in relevant areas such as AI deployment, edge computing, or R&D is desirable.
• Ability to work independently with limited supervision and collaborate effectively within a multidisciplinary team.
• Strong problem-solving skills and the ability to adapt to hardware constraints and real-world challenges.
• Familiarity with edge computing platforms (e.g., NVIDIA Jetson, ARM Cortex, and mobile chipsets) and related tools.

We regret that only shortlisted candidates will be notified.