• Making plans using detailed drawings
• Preparing estimates and budgets
• Creating accurate project specifications
• Designing engineering experiments
• Creating technical reports for customers
• Completing regulatory documents concerning safety issues
• Finishing projects on time and within budget
• Communicating with clients and coworkers about analysis results

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

ACMV Design/Site Engineer - Job Description

1. System Design: Create and optimise air-conditioning and mechanical ventilation systems, including load calculations and equipment selection.

2. Site Supervision: Oversee the installation, testing, and commissioning of ACMV systems on-site to ensure they meet design specifications and quality standards.

3. Technical Support: Provide on-site troubleshooting and technical guidance during construction, resolving any issues related to HVAC systems.

4. Regulatory Compliance: Ensure all designs and installations adhere to local and international codes and standards (e.g., ASHRAE,Green Mark).

5. Project Coordination: Collaborate with architects, contractors, and other stakeholders to ensure seamless integration of ACMV systems into the overall building design.

6. Client Communication: Interface with clients to address their needs, provide updates, and ensure satisfaction throughout the project lifecycle.

7. Minimum Requirements: Bachelor's degree in Mechanical Engineering, 3-5 years of experience in HVAC design and site supervision, proficiency in design and project management tools, and strong problem-solving skills.

ACMV Engineer Minimum Requirements

1. Education: Bachelor’s degree in Mechanical Engineering or related field; a diploma with extensive experience may be considered.

2. Professional Accreditation: Registration with the Professional Engineers Board (PEB) Singapore; Green Mark Accredited Professional (GMAP) is advantageous.

3. Experience: 3-5 years of relevant experience in HVAC or ACMV design, preferably within Singapore.

4. Technical Skills: Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP); strong understanding of Singapore's SS 553, SS 530, and SS 531 standards.

5. Regulatory Compliance: Knowledge of local building codes, fire safety regulations, and BCA standards, including Green Mark Certification requirements.

6. Soft Skills: Strong communication, problem-solving, and project management abilities.

7. Continuing Education: Commitment to Continuous Professional Development (CPD) as required by professional bodies like IES or PEB.

Able to assist in tender pricing of ACMV project/ Alteration & Additional Work.

2. Data Entry for the project material delivery, Bill of Quantity and Tender Pricing.

3. Serves as liaison between the user and in-house contractor on all ACMV related system.

4. Provide sizing and design of ACMV system (chilled water) for individual room

5. Coordinate with supplier / sub-contractor of the tender specification and obtain the quotation from them

6. Control and supervise workmen to make sure standards of building performance, quality, time and cost schedules, and safety are complied.

7. Responsible for keeping daily work record, including additional work claims to the clients and from the subcontractors

Job Title: Project Engineer

Occupation: Mechanical Engineer / Fire Protection Engineer

Industry: Industrial Pump Supply

Job Highlights

• 5 Days Work Week
• Attractive Employee Benefits
• Guaranteed 1-Month Bonus + Attractive Sales Incentive
• Work-Life Balance
• Ample Opportunities for Growth

Job Description

We are seeking a dedicated Project Engineer to support our growing team.

As a key player in the company, you will:

• Support the Project Team in pump selection, quotations, technical documentation, and drawings
• Follow up with customers and suppliers on inquiries and orders
• Liaise with customers, suppliers, and internal departments to ensure project deadlines are met
• Initiate and request orders for required project supplies
• Coordinate project timelines and resources

Requirements

To be successful in this role, candidates should have:

• A minimum of a Diploma in Mechanical Engineering or a relevant field
• Project coordination experience
• Strong critical thinking and time management skills
• Ability to work independently in a fast-paced environment
• Analytical, detailed-oriented, flexible, and dynamic mindset
• Strong written and verbal communication skills
• 2D AutoCAD skills are essential (Good AutoCAD skills are an advantage)
• A Class 3 Driving License is preferred but not mandatory

Skills Required

• Project Coordination
• Mechanical Engineering
• AutoCAD (2D)
• Technical Documentation
• Time Management
• Verbal Communication
• Critical Thinking
• Project Management
• Commissioning
• Ability to work independently

Duties & Responsibilities

- Driving Hook Lift Truck to deliver Open Top Containers to site ( island wide ) accordance to schedule.

- Ad-hoc duties

Requirements:

- Class 4 driving license

- Professional attitude towards driving vehicle

- Be reliable, punctual and motivated with a strong work ethic

- Able to work 6 days per week

- Tel : 6368 9118

Due to major company growth and project awarded, MGroup Engineering Pte Ltd has an immediate opening for Account cum Admin. We are seeking well qualified, enthusiastic people to join us for continued growth of our business.

RESPONSIBILITIES:

• Handling AR and AP functions like data entry, processing payments and bookkeeping.
• Assist in all the daily administrative work include duly issue of invoices, quotation, collection of payment, official receipt, commission vouchers, filling, etc.
• Assist in preparing and generating monthly financial statements and supporting documents
• Assist in preparing quarterly GST report
• Handling the HR related matters, staff claims, etc.
• Other ad hoc duties assigned by Superior.
• Overall responsible for the efficient operations and cleanliness of workplace.

QUALIFICATIONS/ EXPERIENCE REQUIRED:

• Diploma in Administrative/Accounting
• Self-Motivation
• Computer Skill - Microsoft office
• Min 2 years working experience

1) Plan machining by studying engineering drawings with understanding of General Dimensions / Tolerances.

2) Programming by entering instructions, including zero and reference points; setting tools and parameters.

3) Handle all CNC machine related mechanism

4) Verify settings with measurable and First-Off parts against drawings

5) Ensure safe operations and handling at all times

6) Practice preventive maintenance on machines

About Mun Siong Engineering Limited

One of Singapore’s leading integrated service providers since 1969, Mun Siong Engineering Limited offers a range of mechanical and electrical & instrumentation services for oil & gas, petrochemical, energy, chemicals, and power industries. As a one-stop solution provider, the Mun Siong Group caters for engineering, procurement, fabrication, construction, maintenance of plants and equipment, and specialised products and service solutions.

Job Description

Electrical Instrument Engineers are responsible for designing, configuring, and overseeing automated systems and power distribution projects, focusing on enhancing productivity, reliability, safety, and optimization in industrial facilities, from warehouses to complex EPC contracts, while managing contractors and ensuring system stability.

Responsibilities

• Serve as a knowledge resource for instrumentation, control systems, and process automation.
• Develop and maintain project documentation, including P&IDs, Instrument Index, and I/O Lists, across all project phases.
• Prepare and review engineering calculations, specifications, and requisition packages for inquiry and purchase, ensuring compliance with client standards and project requirements.
• Provide technical direction for material selection, vendor compliance, and equipment specifications; perform technical bid evaluations and make purchase recommendations.
• Coordinate with process engineers, mechanical equipment vendors, and external workshare offices to ensure compliance with project requirements and schedules.
• Plan, design, and oversee the construction, installation, and maintenance of electrical and instrumentation systems, ensuring compliance with codes, standards, and safety requirements.
• Prepare technical and construction scope of work documents for instrumentation, control systems, and electrical systems.
• Conduct inspections, testing, and vendor data reviews to ensure specifications and operational standards are met.
• Utilize computer-assisted engineering and design software to perform tasks and develop deliverables.
• Develop TIC cost estimates, effort-hour estimates, and budgets for labor, materials, and construction costs.
• Oversee project execution, ensuring timely completion within budget while maintaining quality and safety standards.
• Investigate customer complaints and recommend corrective measures; conduct field surveys to identify and resolve system issues.
• Supervise and train project team members as necessary.
• Prepare technical reports, system studies, and budgets for new projects, capital programs, and major repairs

Requirements & Professional Skills

• Diploma/Degree in Electrical Engineering
• Able to read and understand circuit diagrams as well as to detect discrepancies for combined services
• Well-versed in all local and international codes and standards on the related field
• Good knowledge in building M&E services, with project site experience in fire protection and electrical systems for M&E specifications, installation and maintenance.
• Positive attitudes/Drive for result.
• Mature personality and able to work independently.
• Good interpersonal, management and decision-making skills.

Job Description

• Coordinated with client, engineers, technicians and provided necessary support for process and Safety groups
• Electrical and instrumentation installation work, wiring and terminations.
• Preparation of Electrical and instrument QA/QC documents.
• Performing loop check, safety interlock functioning test.
• Performing the site testing and commissioning of field Instruments.
• Perform Instrument construction, testing, commissioning work. Preparation of punch list and ensure all the punch list items are rectified before client Final Acceptance.
• Preparation of Electrical & Instrument Index, Instrument IO lists, Instruments datasheets/specifications against the P&ID for the proper construction activities.
• Attend emergency site issues and response to site within service level of agreement

Requirements:

• Diploma/Degree in Electrical/Electronic Engineering
• Relevant experience in Pharma, oil & Gas industry of at least 4-8 year.
• Possess basic safety & health experience and computer skills
• Resourceful, earnest, good team player, meticulous and responsible
• Self-motivated,able to multitask
• Good communication and interpersonal skills, ability to liaise with all levels of people
• Good knowledge of local industry
• Good fundamentals of electrical safety and area classifications.
• Good knowledge of Ingress Protection and explosion prof equipment.

Responsibilities:

Responsible for design, development, commissioning and maintenance of inhouse Ship Management System (SMS), which includes:

• Perform system and architecture design of Ship Management System (SMS).
• Perform system integration for SMS with third party systems.
• Perform, coordinate, manage and support of Factory Acceptance Test (FAT), Set to work (STW) and Harbour Acceptance Test (HAT).
• Perform software configuration management and technical documentation.
• Perform hardware / software maintenance and troubleshooting.
• Liaise with customers, project manager and other engineering trades.
• Ensure operationality and functionality of SMS during the maintenance period of the vessel life cycle.
• Maintain close working relationships with customer, subcontractors, and suppliers.

Knowledge and Skills:

• Knowledge in PLC programming and SCADA software.
• Knowledge in control & instrumentation, and control system design.
• Knowledge in computer administration, cybersecurity and networking concepts.
• Knowledge of standard Communication protocols like Modbus RTU/TCP, Profibus, RS422, RS485, NMEA, CANbus J1939.
• Knowledge in Python, JSON, Restful, Machine Learning and Data Analytics experience will be an advantage.
• Knowledge of international codes, Marine Classification/Statutory Rules and Regulations will be an advantage.
• Experience in Site Testing and commissioning will be an advantage.

Requirements:

• Degree in Engineering in Electrical / Electronics / Computer, those with other engineering experiences are also welcome.
• At least 5 years experiences with system architecture design, system maintenance, and/or IT/Networking
• Ability to work independently under pressure, as well as able to lead a small team
• Possess good communication skills to communicate with suppliers and customers at all levels
• Possess good analytical skills and good problem-solving & troubleshooting skills

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Job Description
To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.

• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring, and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials, and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements.
• Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Job Requirement

• Degree in with degree in Civil, mechanical or equivalent
• At least 1 - 2 years relevant experience in construction site
• Prior experience in Refinery / Process Plant on Civil and/or Mechanical projects execution will be advantageous

1. Engaged in the preparation of engineering drafting input for building and construction projects, with particular emphasis on structural steel.
2. Drafting of detailed engineering drawings, shop and fabrication drawings, cutting lists and nesting plans etc.
3. Generating the Materials Requisition Form (RF) to facilitate procurement.
4. Ensure all works to be performed as per technical and project specification, guidelines and Company procedures, under the supervision and approval of senior staff.
5. Undertake back-drafting of drawings to reflect correction and amendments.
6. Revise drawings to incorporate subsequent modifications.
7. Assists in the production of as-built drawings following receipt of marked up drawings from the project teams.
8. Carry out engineering site surveys to ascertain physical site situations for incorporation as details in drawings.
9. Attend technical meeting at site on an ad-hoc basis.
10. Perform any tasks that are required by Management and as assigned for upholding the ISO 9001 and OHSAS 18001 Integrated Management System.

Job Duties and Responsibilities:

• Responsible for trouble shooting and resolving all welding quality and productivity issues through active engagement with the customers and production supervisors
• Develop and draft new welding procedures, including procedure qualification training
• Trouble-shoot and provide support to the Production on all welding quality issues
• Conduct random inspections to ensure that the welding activities carried out conform to the relevant customer specifications, codes and standards
• Directs and coordinates technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with national code requirements; or testing welding personnel for certification
• Contacts personnel of other agencies, engineering personnel, or clients to exchange ideas, information or offer technical advice concerning welding matters
• Perform any other related duties as assigned by Immediate Supervisor

Requirements:

• Diploma/ degree in Metallurgical/ Material/ Mechanical Engineering
• At least 4 years of relevant experience in preparation of WPS, PQR and welders’ qualification
• Knowledge of API, ASME-IX, NACE MR00175 codes and ISO 9001:2015 standard
• Certified Welding Inspector or CSWIP

1. Lead sales and operation / project team

2. Set direction and guide the project team for all the project

3. Ensure project all is provided with support and advise all aspects of project planning, execution, monitor and control

4. Value engineering, lean engineering and selection of equipments

5. Liaising with main contractor, owner, stakeholder & consultant

6. Check and ensure the scope of work for all the fire protection system and services

7. Prepare weekly, monthly report and project budget

8. Overseeing current project as well upcoming projects

9. Attend and conducting project review and attend meeting

10. Ensure the project delivery as planned schedule and manage operational cost within the budget

11. Prepare and submit authority required documents

12. Monitor compliance of work with the workplace safety and health regulations

13. Maintain customer relationship

14. Knoweldge in AUTO CAD & Revit

14. Other ad-hoc duties as assigned by management

Roles & Responsibilities:

To assist in ensuring the smooth operation of site activities

To provide logistical support (site utilisation) when needed, as requested by sub-contractors

To be the liaison for the coordination of different trades within the same discipline

Responsible for all on-site engineering issues pertaining to site matters

To assist in coordinating with sub-contractors and attend to clients' queries to ensure timely work arrangements

To be involved in the day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule and the local authorities’ quality standard

To assist in managing project documentation and maintain accurate records

Ensure compliance with all health and safety regulations

Requirements:

Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification

Experience or knowledge in Bridge Construction/Crosshead/Lifting Frame/Launching Gantry Operation/Pre-cast Segment Method/MRT/LTA will be an advantage

More than 3 years of site experience in the Construction sector, preferably in superstructure crosshead/precast segmental bridge and Launching Gantry operation or similar

Good team player and able to work independently

BCSS certificate

1. Plan machining by studying engineering drawings with understanding of General Dimensions / Tolerances.

2. Programming by entering instructions, including zero and reference points; setting tools and parameters.

3. Handle all CNC machine related mechanism

4. Verify settings with measurable and First-Off parts against drawings
5. Ensure safe operations and handling at all times
6. Practice preventive maintenance on machines

Job Description:

1. Carry out maintenance, repair and overhaul work on heavy vehicles, has diagnostic capability and able to perform major repair on engine and transmission

2. Ensure high standard of workmanship and minimize turnaround time for scheduled repairs and inspections to meet workshop’s service standards and according to job order.

3. Notify Team Leader of unusual repair problems which will require major repair and replacement parts recommendation.

4. Complete work order for each vehicle and unit serviced.

5. Adhere to defined guidelines in regards to safety, orderliness and etc.

6. Performs ad hoc duties as assigned by Superiors

Job Requirements:

1. Academic qualification: NTC 2 / Diploma Automotive Technology or equivalent

2. Competent in basic English (verbal & written)

3. Prefers candidates with at least class 3 driving license

4. Prior experience of at least 2 to 3 years in performing automotive service repair (commercial vehicle)

Job Title

Engineer

Occupation

ENGINEER

Job Description & Requirements

Job Title: Engineer

● Key Responsibilities

- Responsible for preparing schematic/assembly drawings, vehicular calculation and technical documentation for projects.

- Hands-on for vehicular dimensions measurement.

- LTA submission.

- Engineering support and correspondence to vehicular projects.

- Other ad-hoc tasks assign by Head of Engineering.

● Safety and Compliance:

- Ensure compliance with safety regulations and company policies.

- Conduct risk assessments and implement safety improvements.

● Collaboration:

- Work closely with sales, production, aftersales teams.

● Requirements:

- Candidate possess at least Diploma in Engineering (Mechanical / Mechatronic) or equivalent.

- Minimum one of experience in a manufacturing environment, preferably in vehicular or related industries.

- Proficient in CAD software (e.g., SolidWorks, AutoCAD) and process simulation tools.

- Proficient in mechanical structural calculation

- Advantage if candidate has experience and familiar with quality management systems
(e.g., ISO 9001, ISO45001).

● Desired Quality:

- Have analytical thinking skills.

- Can work well with others.

- To be flexible and open to company workflow changes.

- Strong problem-solving, communication, and project management skills.

- Ability to work in a desk/factory environment and prioritize multi-tasking.

- Self starter

- Willing to learn

Responsibilities:

• Assist Engineer in coordinating and supervising maintenance and overhauling jobs
• Prepare Job Acceptance on completion of Jobs
• Monitor and update job status daily.
• Supervise mechanical / diesel / air-conditioning works
• Liaise with customers and contractors on works to be carried out
• Arrange for inspection / job acceptance
• Carry out general repair and maintenance jobs onboard vessels or in workshops
• Dismantle and troubleshoot for mechanical defects
• Perform testing of equipment to ensure smooth operation
• Perform test run and report to superior on the job completion status

Requirements:

• NTC in Mechanical/Marine/Automotive related field.
• Physically fit with good eyesight
• Possess basic understanding of basic components and functions of mechanical engines or diesel engines
• Able to use IMTE tools such as micrometer, bore gauge and torque wrench
• Able to read simple drawings and service reports
• Possess man management experience for up to 5 technicians
• Willing to work under outdoor environment on site
• Basic working knowledge in MS Word and Excel for status and reporting purpose
• Willing to work in Changi area, with company transport provided

Other Information:

• Location: Changi
• Transport provided at: Jurong West & East, Jalan Bahar, Choa Chu Kang MRT, Bukit Panjang, Woodlands MRT, Bukit Merah, Sengkang, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Job Responsibilities:

- Perform general administrative duties.

- Assist in accounting tasks (no need experience for full-set accounting).

- Proficient in Excel and willing to learn other accounting software.

Requirements:

- At least 2-3 years of experience in admin and accounting roles.

- Strong communication skills in English

- Singaporean/PR preferred.

If you are detail-oriented, organized, and eager to contribute to a dynamic team, we want to hear from you!

Job Responsibilities:

• Handle full/partial sets company account.
• Monthly account closing and management reporting
• Actively involved in the new ERP system
• Keep track of inventory inflow and outflow
• Ability to handle multiple tasks and prioritize effectively
• Attention to detail and accuracy in documentation.
• Any other ad-hoc duties assigned

Requirements:

• At least 2 to 3 years of relevant working experience
• Knowledge and proficiency in accounting technology software and databases and other business intelligence software.
• Strong attention to detail and accuracy.
• Good organizational and time management skills.
• Ability to work independently and manage tasks efficiently.
• Excellent communication skills.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Perform inspections and tests on electrical and instrumentation systems, including cables, panels, field instruments, and control systems.
• Ensure installations and testing comply with approved drawings, project specifications, and relevant standards
• Prepare and review Inspection and Test Plans (ITPs), Method Statements, and Quality Control procedures.
• Maintain quality records, such as test reports, calibration certificates, and inspection checklists.
• Liaise with construction team, subcontractors, and corporate QMS department to address quality-related issues
• Support commissioning activities by ensuring all quality requirements are met before system handover
• Ensure compliance with industry standards, local regulations, and safety requirements
• Any other duties to be assigned from time to time

Pre-requsities

• Degree/Diploma in Electrical Engineering or related field
• Minimum 5 years of experience in power or industrial plant construction projects
• In-depth knowledge of electrical systems for critical equipments in power plant construction
• Proficiency in inspection and testing of electrical and instrumentation systems
• Effective communication and interpersonal skills for collaboration with multidisciplinary teams
• Commitment to safety and compliance with regulatory requirements
• Project location: Jurong Island (Transport provided at designated pick-up points)

Job Requirements:

• Bachelor's degree in Electrical Engineering, Automation, or a related field.
• Proven experience in industrial automation systems, control circuits, and programming languages such as Python, C, or equivalent.
• Familiarity with industrial communication protocols, fieldbus protocols, MCCBs, contactors, and electrical schematics.
• Strong problem-solving and troubleshooting skills.
• Experience working at stations in overseas locations.
• Willingness and ability to travel and be stationed in developing countries and work in high stress environment and multitask.
• Minimum of 1 year of experience in marine equipment training and work in the marine field.
• Knowledge or experience with Dual Fuel (DF) Engines is a significant advantage.
• Required skills to communicate with customers for Sales and technical assistance.

Job Description:

• Support the implementation and execution of Marine / Industrial Remote Monitoring System projects.
• Perform troubleshooting, maintenance, and repair of electrical systems and circuits.
• Train and assist the overseas team in electrical engineering processes and best practices.
• Provide support for other technical needs as required.
• Assist with IT troubleshooting and maintenance of on-site IT equipment.
• To support the sales activities.
• Expand sales for existing & new customers and product portfolio and Implementing marketing strategies and analyzing trends and results.

• Experienced Structural Steel Detailer with good knowledge of Tekla 3D Modelling
• Well versed in using Tekla Structures or Autodesk advance steel, AutoCAD and Sketch-up software
• Min. 2 - 3 years’ experience (in structural steel detailing is an added advantage)
• Coordination and preparation of specification and plans and to liaise with Project Managers and Engineers for technical drawings and submission approval
• Review and verify drawings to ensure compliance with design specifications and guidelines
• Maintain good document control and filing
• Able to undertake any other duties assigned Requirement
• Drafting of structural drawing
• Prepare detailed shop drawings
• To coordinate with production
• Must be willing to work as a team and show work commitment
• Bachelor Degree
• Knowledge in Structural Steelworks or Equivalent.
• Able Work from home