Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

Roles & Responsibilities

• Provide technical advice and support for daily operational issues.
• Perform inspections of welding, structural fabrication, and piping systems to ensure compliance with industry standards.
• Review piping isometric drawings and verify that materials meet specifications.
• Coordinate and oversee NDT activities, including radiographic testing (RT), and ensure accurate results through proper witnessing and review.
• Conduct thorough inspections and assessments during plant shutdowns, documenting findings and reporting discrepancies.
• Assist in the development and implementation of quality control procedures.
• Participate in safety meetings and ensure compliance with health and safety regulations.
• Maintain accurate and organized records of inspections, reports, and certifications.
• Collaborate with engineering and construction teams to ensure design specifications are met.

Qualifications:

• Minimum of 3 years of experience in plant inspections or related fields, especially during shutdowns.
• Valid certification in at least one API area (API 510, API 570, or API 653).
• Knowledge and experience in welding inspection, structural fabrication, and piping materials.
• Proficient in MS Office and CAD/CAM software.
• Familiarity with industry standards and codes (e.g., ASME, ASTM).
• Experience with non-destructive testing methods (UT, PT, MT, VT) is a plus.
• Strong communication skills, both written and verbal, for effective collaboration with team members and clients.
• Ability to work in a fast-paced environment and manage multiple priorities.

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Role

As our Sales Engineer, you will play a vital role in the company’s revenue growth through obtaining new sales from existing and new customers, as well as maintaining strong business relationship with customers.

Your Calling

· Plan and carry out sales activities (quotation, price negotiation, delivery, etc.)

· Hunter role need to exploring new potential customers and obtain new businesses

· Execute sales and marketing strategies to improve/increase sales revenue

· Liaise with customers and address their feedbacks/issues

· Establish and maintain strong business relationships with existing and potential customers

· Provide sales and technical/engineering support to customers

· Prepare and deliver technical presentation to explain and promote company’s services

· Keep track of orders and ensure timely delivery

· Monitoring competition by gathering current market information on pricing, delivery lead time etc.

· Any other ad-hoc duties as assigned

Your Success Factors

· Min. Diploma Holder in Precision/Manufacturing Engineering or similar field

· Able to read and interpret technical drawings

· Experience in Precision Engineering or related field advantageous

· Have experience in using ERP Systems advantageous

· Outgoing personality with strong interpersonal hunger for success and communication skills

· Initiative and results driven

· Entry level candidate are welcome

Fill requisitions, work orders, or requests for materials, tools, or other stock items

• Prepares orders by processing requests and supply orders; packing boxes; placing orders in delivery area.

• Verify that the goods are intact and report any defects.

• Perform inventory controls and keep quality standards high for audits.

• Completes deliveries by driving truck or van to and from vendors.

• Maintains inventory controls by collecting stock location orders.

• Conduct weekly cycle counts.

• Maintains quality service by following organization standards.

Established in 2010, the Energy Research Institute @ NTU (ERI@N) is a pan-university research institute that focuses on systems-level research for tropical megacities. It performs translational research that covers the energy value chain from generation to innovative end-use solutions, motivated by industrialisation and deployment.

In 2021, Enterprise Singapore, the national standards body for Singapore, had appointed ERI@N as a Standards Development Organisation (SDO) to develop and promote standards under the Electrical and Electronic Standards Committee. This includes standards supporting emerging areas such as renewables -offshore wind/marine & solar energy, secondary batteries and cells, solid state transformers, electrical energy storage systems, and smart grids. We also work with regulators and the industry on standards for electrical installations, building & services and safety and effectiveness of electrical products and services.

We are looking for a passionate Project Manager to support the work of the SDO.

Core expertise:

Project management responsibilities include managing the identification, development and promotion of standards meeting key requirements set by Enterprise Singapore (EnterpriseSG). These include supporting standards committees under the management of ERI@N in their standard development and promotion work to ensure timely and successful delivery of new and reviewed standards. The PM should have a background in business skills, project management, budgeting, analysis and stakeholder management. Familiarity with key technologies such as power systems, electronics, solar PV, battery systems and electrification as well as understanding of commercialization is an advantage.The PM must be detail oriented, able to multitask and demonstrate the ability to be intervene decisively and proactively.

Key Responsibilities:

Standards development

• Support standards committees to identify key areas for standards development from FY 2024 to FY 2026 which includes meetings with key stakeholders and preparing new work proposals.
• Support standards committees to develop standards within the timelines and quality requirements set by EnterpriseSG and the industry. These will include managing the preparations for meetings, capturing key comments, discussions and edits, conducting public consultations, addressing public comments, preparing draft standards for publications.
• Support the standards committee leaders in managing key stakeholders within the committee and industry with aim to build consensus and address standards implementation issues.
• Support participation of standards partners in international standardization including balloting, international meetings and hosting ISO/IEC TC meetings in Singapore.

Standards promotion

• Work with standards committees and EnterpriseSG to plan and execute standards promotions events targeting key stakeholders such as industry, government agencies and regulators, research bodies and the public. This could include standards launches, case studies, seminars and workshops. The PM is also expected to develop suitable presentation materials for these events.
• Work with standards committees and EnterpriseSG on verification studies to quantitatively evaluate the adoption of standards by key stakeholders.

SDO administration

• Assist Head, SDO and colleagues to manage the SDO budget to ensure budget marksmanship are met.
• Ensure procurement guidelines for EnterpriseSG and NTU are complied with.
• Assist Head, SDO in preparation of SDO progress reports to EnterpriseSG, the Singapore Standards Council and ERI@N management.
• Assist Head, SDO in audits concerning the operations and financial issues of the SDO.

Job Requirements:

Competencies and Qualifications

• Bachelor’s Degree in Electrical Engineering/ Computer Science / Mathematics/ Physics
• Min. Years of Experience: 3 years for project manager.
• Entry level candidates are welcomed to apply but will receive title of Project Officer.
• Certified Project Management Professional (PMP) will be an advantage
• Working Knowledge in Agile Project Delivery
• Working Knowledge in Microsoft Project, Excel, Word, Power point, SharePoint
• Experience within the utility or energy and power system industry is a strong advantage
• Excellent Stakeholder management

Added advantage:

• Experience in adopting or implementing standards
• Experience in Interactive Project Management tools like Click up, JIRA.
• Experience in document management tools like SharePoint
• Experience in R&D cross-functional New Product/Technology Introduction (NPI/NTI) programs & commercialization

Other Requirements:

• Excellent written and verbal communication skills
• An effective and efficient team player with good attitude and interpersonal skills
• Self-motivated for documentation maintenance and management

We regret that only shortlisted candidates will be notified.

1. Responsible for all phases of planning and execution of project or may be responsible for a segment of a larger project
2. Has responsibility for day to day coordination activities with the engineering team ensures successful communication of project issues and resolution
3. B.S. or equivalent Degree in Engineering from an accredited university with relevant experience in oil/gas industry offshore projects
4. Have the experience in supporting Project Engineering Manager in planning, organizing, coordinating, and controlling project in accordance with the established policies, procedures, systems, and requirements
5. Requires demonstrated ability in supporting engineering effort for major projects in major oil and gas companies in-house or as part of Engineering Contractor’s team
6. Possesses knowledge of the respective industry.

Position Overview: We are seeking a detail-oriented and patient individual to join our team as a Accountant Assistant. This role is ideal for someone with basic financial knowledge and a strong sense of responsibility. Proficiency in Chinese (Mandarin) is required for this position.

Key Responsibilities

----Reconciliation & Transactions:

• Perform daily, weekly, and monthly reconciliations of cash and bank accounts.
• Identify and resolve discrepancies in financial records and bank accounts.
• Ensure all transactions are recorded accurately and in a timely manner.
• Assist in maintaining and updating financial records and documentation
• 
  
• ----Administrative Support:
  • Provide support to the finance team in preparing reports and documents.
  • Assist in filing and organizing financial paperwork.
  • 
    
  • ----Compliance:
  • Ensure compliance with company policies and financial regulations.
  • Maintain confidentiality of financial information.

Qualifications:

• Basic knowledge of finance or accounting principles.
• 1-2 years of relevant administrative work experience.
• Strong attention to detail and a high level of accuracy.
• Patience and the ability to work under pressure.
• Proficiency in Chinese (Mandarin) is required.
• Previous experience in an accountant/ casher or finance-related role is a plus.
• Good communication and interpersonal skills.

1. Manage the team of RTOs, supervision of site set up, earth works, drainage works and reinstatement works

2. Report to Qualified Person

3. Prepare weekly reports and monthly reports.

4. Attend the meeting with client and consultants

5. Report any non-compliances to Qualified Person

6. Ensure the site Safety

. QAQC Inspector (Fabrication /Welding)

Responsibilities:

• Preparing or establishing that a welding procedure is available, has been approved as

required by the appropriate authority and is being employed in production.

• Witnessing of welder and procedure approval tests that including of the preparation of test

pieces and destructive tests and verifying compliance with appropriate standards and

specifications.

• Verification that adequate and valid welder approvals are available, and that only approved

welders as required are used in production.

• Interpretation of weld drawings and weld symbols.

• Performing of visual inspection and ensure that all finished goods are checked and approved

prior to any delivery of handover.

• Verification that post weld heat treatment has been conducted in accordance with

specification requirements.

• Appreciation of the factors influencing the formation of weld defects and their acceptability

in relation to the written specification.

• Coordination with QC Inspector (Hull/Structure and Piping) and NDT Coordinator, to verify

and ensure that all finished welds are checked and approved prior to any delivery of

handover.

• Ensure that quality assurance standards and procedures are maintained.

• Ensure that reports that are required are completed accordingly to the project

specifications.

• Liaise with Contractor, Production and Client’s representative to ensure the product is

checked and complied with the project quality plan and specifications.

• Perform any other tasks as may be assigned by the supervisor.

• Ensure compliance to relevant government regulations and company’s quality, safety, health

and environmental (QSHE) policies, practices and procedures at all times.

Requirements:

• Minimum Diploma in Engineering or relevant field of International certification (e.g. AWSCWI or CSWIP 3.1 WI).

• Physically fit since some of tasks require lifting of some equipment.

• A team player with the ability to work independently as well as in a team

• Good communication skills, meticulous, resourceful, able to multi-task

• Computer literary (MS. Office).

· Planning and scheduling of site works.

· Monitoring work progress.

· Directed all necessary day to day Site activities.

· Supervising the structural (RC & Steel Structure) and architectural work.

· Coordinate work with M&E contractors.

· Checking reinforcement of slab, beams & other structural elements prior to joint inspection with QPS.

· Perform site inspection, liaise & coordinate with RE/RTO.

· Quality analysis and control of works.

· Implementation of safe work environment.

· Coordinated with subcontractors ensuring their work met project specifications as well as monitored their progress towards completion deadlines.

• Conceptualization and design of facades, including preparation of drawings and structural calculations.
• Delivery of technical presentations.
• Coordination with clients, architects, consultants, façade contractors, suppliers, and other project team members.
• Supervision of construction, site inspections, and training of constructors.
• Preparation of technical submissions, proposals, and documentation.

Review project specifications, technical clarifications and construction drawings.

Coordinate with Architect, Structural Engineer, M&E Engineer and Subcontractors to resolve construction problems and issues to ensure timely and smooth progress of works

Coordinate all architectural drawings and works, prepare, submit and update status of shop drawings & As-Built submission and material approval

Liaise with Subcontractors on technical issues to ensure timely submission an approval of shopdrawings

Job Description:

• Manage customer orders from processing to fulfilment, ensuring timely and accurate delivery.
• Proactively address back orders and resolve customer issues to ensuring high levels of satisfaction.
• Generate purchase orders after obtaining necessary clarifications and confirming prices.
• Coordinate with suppliers on goods readiness and ensure smooth communication
• Collaborate with freight forwarders to arrange shipments
• Manage stock record to ensure availability and accuracy.
• Liaise with customers on delivery arrangements.
• Generate delivery orders and invoices.
• Handle ISO certification renewal processes to ensure compliance with standards.
• Handle office administration tasks and undertake any other related duties as assigned.

Job Requirements:

· Diploma in Supply Chain, Engineering or a related field.

· 2 to 3 years’ working experience in Operations.

· Familiarity with the Globe 3 ERP System is an advantage.

· Ability to work independently with a committed and proactive approach.

· A positive attitude, willingness to learn, and flexibility in handling tasks.

· Good personality, willing to learn and flexible on the task.

· Immediate availability is preferred.

Job Description & Requirements • Assist the Project Manager and Site Manager in overseeing the day-to-day operations on site. • Assist in the planning and deployment of manpower and resources to meet operational needs. • Ensure works are carried out in accordance to the project schedule, quality requirements and safety policy. • Supervise performance of site crews and subcontractor. • Monitor work progress, identify and resolve ground issues when required • Ensure availability of materials and equipment on-site to meet operational needs. • Work with inspectors and QA crew to ensure quality workmanship. • Liaise with subcontractors for cladding replacement works. • Requirements: • Minimum diploma in Engineering • 3- 5 years’ of relevant work experience in Construction industry, ideally for main-contractor. • Understanding of project flow for Construction / Civil Engineering work. • Possess good communication skill and leadership quality to supervise workers and...

• Report to the Planning Manager.
• Responsible for planning the overall schedule.
• Review and monitor the progress of the project while taking into consideration the schedule, cost control and risk management.
• Coordinates with construction team to report the reason of delay, potential risks and mitigation measures in consideration of understanding overall work sequence with planned resources
• Prepare project progress reports.

Job requirements:

• Degree in Civil Engineering or its equivalent
• Minimum 15 years of relevant experience with A1 MNC construction firm is essential for this position
• Candidate should possess relevant experience in construction planning and program coordination for major infrastructure projects
• Experience in projects with international EPC contractors or mega projects with contract amount higher than S$500 million is highly preferred.
• Proficient in Primavera P6, MS Project and ERP is mandatory for this position
• Strong background in both technical and contractual issues
• Self-motivated, independent individual and possesses great initiatives
• Good interpersonal skills
• Past experience with LTA project(NSC) is an added advantage
• Location : Woodlands
• Project: Viaducts

Key Responsibilities and Activities:
• Plan, organize, and manage day-to-day site activities to meet project objectives.
• Supervise and coordinate the work of subcontractors, labourers, and site personnel.
• Ensure that construction activities adhere to approved designs, schedules, and budgets.
• Monitor the quality of work and ensure compliance with all the specifications.

• Conduct regular site inspections to identify and resolve issues or potential delays.
• Manage the logistics of material delivery and storage, ensuring efficient use of resources.
• Liaise with project stakeholders (clients, engineers, architects) and provide progress updates.
• Ensure health and safety protocols are strictly followed on-site.
• Prepare and submit site progress reports and documentation to the Top management team.

Technical Competencies:
• Knowledge of construction methodologies, materials, and building regulations.
• Ability to interpret and execute construction plans and technical drawings.
• Proficiency in project management software (e.g., MS Project, Primavera).
• Expertise in managing construction schedules, budgets, and resource allocation.

Skills & Knowledge:
• Strong understanding of construction processes, quality control, and safety standards.
• Excellent project management skills, including budgeting, scheduling, and resource management.
• Knowledge of construction contracts, procurement, and subcontractor management.
• Effective problem-solving and conflict resolution abilities.

Formal Education:
• Bachelor’s degree in Civil Engineering, Construction Management, or a related field.

Experience Required:
• 5–10 years of experience in construction site management

• Proven experience in leading site teams, coordinating with stakeholders, and managing construction schedules and budgets.

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

Our company is looking for a Quality Assurance / Management Representative who will perform the following tasks:

• Manage the company's ISO9001:2015 and ISO45001:2018 systems by leading both internal and external audits.
• Monitor and analyze the company's quality and safety performance through the action plans in place.
• Keep abreast of the government requirements as well updates on the standards to ensure compliance of the company's systems and policies.
• Ensure that all statutory licenses, certificates, and inspections of the company's equipment and machinery are valid and up to date.
• Manage and monitor the company's measuring equipment and devices to ensure that they are calibrated as per the required standard of the products.
• Liaise with all external stakeholders such as government bodies (MOM, BCA, SCDF, etc) with regards to company's operation and compliance.
• Communicate with existing customers on their regular audits, non disclosure agreements, and additional requirements which may affect the company's status of being an approved vendor.
• Assist project engineers in securing Certificate of Origin (COO) and / or Preferential Certificate of Origin (PCO) for products.
• Analyze the applicable tariff to be applied for free trade agreement (FTA) purposes.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Summary:

We are seeking a dedicated and skilled Workshop Executive to manage the fleets of vehicles maintenance project. The successful candidate will be responsible for overseeing the maintenance, repair, and efficient operation of our vehicle fleet, ensuring all project milestones and deadlines are met.

Key Responsibilities:

• Manage the day-to-day operations of the Automotive workshop, including scheduling and supervising maintenance and repair activities.
• Ensure all vehicles are maintained in optimal condition and comply with safety standards.
• Coordinate with suppliers and vendors for parts and services.
• Monitor and manage the fleet budget, ensuring cost-effective operations.
• Maintain accurate records of all maintenance and repair activities.
• Develop and implement preventive maintenance programs.
• Train and supervise workshop staff, ensuring high performance and adherence to safety protocols.
• Collaborate with other departments to ensure the smooth execution of the project.

Requirements:

• Diploma in Mechanical Engineering, Automotive Technology, or a related field.
• Proven experience in fleet management, vehicle maintenance, and workshop operations.
• Strong knowledge of automotive systems and repair techniques.
• Excellent organizational and project management skills.
• Ability to lead and motivate a team.
• Strong communication and interpersonal skills.
• Proficiency in using fleet management software and tools.
• Ability to work under pressure and meet tight deadlines.
• Valid driver’s license

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe,

the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology

and innovation to solve real-world problems and improve lives. Our dedication to excellence and our

strong track record have earned us a distinctive reputation for quality and trust as a global technology,

defence and engineering group, spanning across the aerospace, smart city, defence and public security

segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the

Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic

suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries,

critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep

domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity

engineering, digital authentication, SCADA protection, audit and compliance.

Tasks description

• Job Opening, Job Amendment, Sales Confirmation, Cost Transfer, Job Closing, Billing

• Treasury / Hedging

• Inventory

• Month end closing/ Reporting on CACL (Current Assets/ Current Liabilities)

• Projects incl ERP Harmonization/ Continuous Improvement/ Automation

• Ad hoc projects as assigned

Tasks Delivery

• Deliver task on time with quality as requested

• Willing to work OT (if required to deliver the work)

• Able to demonstrate thorough analytical skills process

• Able to think and work independently with minimum but clear guidance

Technical Skills Requirements:

• Hands on and familiar with Project Management / WBS in SAP

• Handling/Analyze Thousands of WBS data regularly

• Contract Assets/ Contract Liabilities

• Return on Capital Employed (RoCE) concept

• Orderbook concept

Other Requirements:

• At least more than 5 years of Financial Accounting and Business Controlling experience;

• Proficient with MS Excel, MS Powerpoint, SAP

• Knowledge on Project Costing/ WBS settlement will be preferred

• Strong business acumen, analytical skills and sound knowledge of accounting, taxation standards and relevant statutory requirements

• Able to work independently under high pressure with very limited resources

• Strong communication and presentation skills

• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Job Description

- Managing a part of the construction

project

- Assist in technical advice and supervision

for other members of the staff

- Planning day to day work program of the

project progress

- Ensure projects meets agreed

specifications, budgets as well as

timescales

- Authorizing technical drawings and

engineering plans

- Ad-hoc assignments

Job Requirements

- Diploma in civil engineering or equivalent

- Minimum 1 year experience in landed

property from start to finish

- Good communications skills

• Posting of recruitment advertisements
• Engagement with both internal and external stakeholders such as employees and vendors, etc
• Manage office sundry purchases
• Payroll administration
• Assists in employment contract renewals
• Coordinate medical arrangement for foreign employees (medical check-ups for work pass, and vaccination)
• Ensure complete, up-to-date, accurate and accessible records are kept for all employees.
• Assists in the co-ordination of social and recreational activities to promote the general welfare of all employees
• Performs HR data entry relating to employee's information, training records, etc.
• Manage and route phone calls appropriately
• Assists in work pass applications and other immigration related work.
• Prepare and submit government bodies and statutory board related surveys.