Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Scope:

• Responsible for all cleaning in and around office buildings.
• Cleans floors and toilets
• Sweeping, dusting and clearing of rubbish
• Spot cleaning glass and windows.
• Any ad-hoc cleaning duties as assigned

Job Requirements

• Physically fit and able to perform heavy cleaning duties like sweeping, mopping and so on.

Board Roles and Director Duties

Board’s Role

The Board’s role is to:

1. provide entrepreneurial leadership, and set strategic objectives, which should include appropriate focus on value creation, innovation and sustainability;
2. ensure that the necessary resources are in place for the company to meet its strategic objectives;
3. establish and maintain a sound risk management framework to effectively monitor and manage risks, and to achieve an appropriate balance between risks and company performance;
4. constructively challenge Management and review its performance;
5. instil an ethical corporate culture and ensure that the company’s values, standards, policies and practices are consistent with the culture; and
6. ensure transparency and accountability to key stakeholder groups.

Scope of Director Duties

Directors should be aware of their duties at law, which includes acting in good faith and the best interests of the company; exercising due care, skills and diligence; and avoiding conflicts of interest. Directors should also put in place policies, structures and mechanisms to ensure compliance with legislative and regulatory requirements, establish appropriate tone-at-the-top, desired organisational culture and standards of ethical behaviour.

While the duties imposed by law are the same for all directors, a listed Board will generally have different classes of directors (executive, non-executive and independent directors) with different roles:

• Executive Directors (EDs) are usually members of senior management, and involved in the day-to-day running of the business. Executive directors are expected to:

1. provide insights on the company’s day-to-day operations, as appropriate;
2. provide Management’s views without undermining management accountability to the Board; and
3. collaborate closely with non-executive directors for the long term success of the company.

• Reports to Subcontracts Manager
• Quantity Survey for Subcontract Works (Civil)
• Prepare the tender document for new subcontract bidding
• Review of Subcontractor’s proposal
• Make a Subcontract Agreement
• Review Subcontractor’s payment claim and prepare payment response
• Budgetary review of Subcontractor’s claim issue
• Manage Subcontract issues from time to time
• Focus on site issues for site progression

Job requirements:

• Degree in Quantity Surveying / Civil Engineering or Equivalent
• Minimum 3 years of working experience in quantity surveying
• Strong communication & negotiation skills
• Proficient in MS Office
• Self-motivated and good leadership
• Location: Woodlands
• Project: Viaducts

About the Role:

We are seeking a seasoned Senior Product Development Manager with over 10 years of experience specializing in the design and development of automation products for bioenvironmental applications. This position focuses on driving innovative projects in Industrial Automation, Bio-Environmental Monitoring, and Consumer Electronics, managing the complete product development lifecycle to deliver high-quality, technically advanced, and manufacturable solutions.

You will bring in-depth knowledge of electronics, embedded systems, full-system automation, and mechanical integration to design and guide fabrication teams, producing innovative products and prototypes for industrial and academic clients.

Key Responsibilities:

1. Product Development & Lifecycle Management

• Lead the entire product lifecycle, from concept creation to batch mass production, ensuring on-time delivery and cost-effectiveness.

2. Circuit Design

• Design and develop high-performance analog, digital, and mixed-signal circuits, focusing on low-noise designs, high-resolution ADC/DACs, and high-speed communication interfaces.

3. PCB Design & Manufacturing

• Execute PCB design using tools like Altium Designer, incorporating Design for Manufacturability (DfM) and Design for Testability (DfT) principles.

4. Embedded Systems Development

• Program and debug firmware for microcontrollers (MCUs) and system-on-chips (SoCs), optimizing for performance and energy efficiency.

5. Data Communication Systems

• Develop robust communication protocols, including I²C, SPI, RS232, RS485, and other bus systems, integrating sensor networks and actuator controls.

6. Mechanical Integration

• Collaborate with and review mechanical designs using tools like SolidWorks and AutoCAD, ensuring seamless electronic-mechanical compatibility.

7. System Testing & Quality Assurance

• Conduct Design Failure Mode and Effects Analysis (DFMEA), tolerance analysis, reliability testing, and EMI/EMC validation to meet regulatory and quality standards.

8. Bio diagnostics

• Apply hands-on expertise in bio diagnostics, driving the development, testing, and optimization of diagnostic tools and processes.

9. Prototyping & Troubleshooting

• Oversee prototype development, testing, and root-cause analysis to resolve hardware and firmware issues promptly.

10. Interdisciplinary Collaboration

• Work closely with mechanical, software, and quality assurance teams to deliver integrated and cohesive product designs.

11. Documentation & Compliance

• Maintain comprehensive project documentation to ensure adherence to ISO standards and regulatory requirements.

Requirements:

Technical Expertise:

• Proficient in Altium Designer; experience with OrCAD or Eagle is a plus.
• Advanced programming skills in C, C++, and Python, with experience in embedded systems and RTOS environments.
• Strong knowledge of analog and digital design principles, including power electronics and high-frequency PCB layouts.
• Hands-on experience with microcontrollers, FPGA programming, and single-board computers (e.g., Raspberry Pi).
• Expertise in communication protocols: I²C, SPI, RS232, RS485, UART, and their applications in IoT systems.
• Experience in sensor integration, including temperature sensors, photo detectors, and flow meters.
• Proficiency in mechanical CAD tools for cross-disciplinary collaboration; SolidWorks and AutoCAD preferred.
• Practical experience in GUI development and familiarity with Linux-based environments (e.g., Ubuntu).
• Knowledge of P&ID diagrams, microfluidic system design, and control methodologies.
• Strong analytical and problem-solving skills, with expertise in (D)FMEA, design optimization, and quality management systems.
• In-depth understanding and hands-on experience in bioprocessing systems, particularly in E. coli detection and diagnostics.
• Expertise in developing and implementing diagnostic methods for microbial monitoring, including biosensors and other analytical tools.

Industry Expertise:

• Experience in water quality monitoring systems and microbial monitoring technologies.
• Familiarity with fluidic control systems, including valves, pumps, and flow control mechanisms.

Soft Skills:

• Excellent communication skills, with the ability to document and present technical concepts effectively.
• Proven ability to excel in fast-paced, collaborative environments.
• Proficiency in MS Office tools (Word, Excel, PowerPoint); experience with Power BI and Visio is a plus.

Key Responsibilities:

• Manage full accounts cycle, including bank reconciliation and journal entries.
• Ensure accurate data entry in for all transactions.
• Prepare financial data for entry into the financial system
• Keep accounting records and bank statements
• Ensure timely, accurate month-end and year-end closing
• Prepare and file GST returns
• Preparation of tax computation and tax planning
• Filling tax returns on time and updating the management about new changes in rules and regulations.
• Liaise and coordinate with external auditors and tax agents;
• Ensure accounting deadlines are met;
• Review subsidiary accounts
• Other ad hoc duties

Job Requirement

• Diploma in Accountancy or equivalent.
• Minimum 2 years of relevant accounting experience.
• Have prior experience in handling full set of accounts and statutory reporting
• Independent to fulfil tasks and a team player to perform tasks in the company workflow

Responsibilities

• Perform Reliability, Maintainability and Supportability (RMS) analysis, to ensure an effective through life support capability package to support the System.
• Engage design engineers on design specifications and influence Reliability and Maintainability (RAM) in their design.
• Engage customers and contractors, and to ensure RAM and ILS deliverables are on schedule and of quality.
• Lead ILS team of technical writers, technical trainers and supply support management to ensure supportability of the Systems.

Requirements

• Degree in Mechanical Engineering or Mechatronics Engineering or equivalent.
• Preferably RAM and ILS knowledge. Training / OJT will be provided, if not equipped with basic statistics skills.
• Preferably knowledge in either Automotive and/or Artillery systems.
• Meticulous in quantitative analysis and strong in statistical analysis.
• Good leadership skills and project management skills.
• Strong communication & interpersonal skills.
• Entry Level candidate are welcome to apply

*Expected to conduct equipment training*

The Job:

Training

1. Achieve annual department budget and targeted trainee participation
2. Provide guidance to trainers for conduct of WSQ courses with alignment to stat board regulatory requirements
3. Upkeep SSG ATO and ITE COJTC status as an accredited training provider
4. Develop training programs on MHE and collaborate with Subject Matter Experts for smooth delivery of training course syllabus

Curriculum Developer:

1. Develop new coursewares (Product and Process) to meet market trend and demands
2. Submit new coursewares for regulatory approval for course commencement
3. Enhance existing coursewares to meet regulatory requirements
4. To maintain course registry records and filing

The Person:

• Min Diploma – preferably Engineering
• Attained full WSQ DACE/DDDLP certification
• Min 3 yrs of experience
• Possesses Class 3 and Forklift license and has experience operating it, comfortably
• Written and oral communication skills, specifically an ability to engage an audience on training topics to solidify adoption of product.
• Effectively bi-lingual in English and Mandarin
• Develop and design courses/curriculum for all learning needs.
• Knowledge on WSH requirements
• To integrate teaching methodologies, learning styles and educational materials for better engagement to meet learning outcomes
• Must be able to do stand-up trainings for internal and external stakeholder
• Experienced in developing training plans
• Sales and marketing of courses
• Full Advanced Cert in Training and Assessment (ACTA)

1. Manage and control daily work activities at Mechanical and Electrical project sites of Fusion Engineering & Services Pte Ltd at various locations in Singapore (Construction and plant maintenance work). Applicant should be well versed in reviewing contract documents and submitting quotations with a proactive approach

2. Applicant shall implement safe work practices at the job site to work towards Zero LTI

3. Applicant should have sound experience in managing manpower and execution of project sites

4. To work closely with the owner, client, sub-vendors, main contractors, and suppliers

5. Manage and Execute the project activities including Quality to ensure that the project is completed according to the planned schedule

6. The Project Manager shall be responsible for ensuring that the project execution is according to the project Safety and quality requirements

7. To maintain project documentation at all phases of construction

About our group:

Our Facility team is dedicated to the operation and maintenance of various utility systems crucial for the round-the-clock operation of our high-tech manufacturing plant. We manage systems such as Chiller, Cooling Tower, Compressed Dried Air, Vacuum, Process Cooling Water, UPW, and HT/LT Electrical Installations, along with Cleanroom HVAC equipment. As a vital part of the organization, we contribute to the efficiency, reliability, sustainability, and innovation of our plant.

About the role - you will:

• Learn and contribute to the operation and control of various facility equipment/systems through the Facility Control Center using SCADA computer.
• Perform daily logging, update checklists, and engage in in-house preventive maintenance (PM) activities.
• Supervise vendor PM/repair work, ensuring adherence to Standard Operating Procedures.
• Schedule and track weekly/monthly PM activities and close computerized work orders upon completion.
• Respond promptly to facility system/equipment breakdowns, production-related issues and effectively to minimize downtime
• Monitor and evaluate equipment/system performance and capacity usage, providing regular reports to superiors for further review.
• Record and optimize the plant's water consumption.
• Track Cooling Tower water quality and water parameters for compliance with regulatory standards.
• Maintain records of equipment service reports for audit purposes.

About you:

• Self-initiative, positive attitude, and the ability to work well as a team member.
• Proactive, independent, and capable of working with minimal supervision and under pressure.
• Strong interpersonal and communication skills.
• Willingness to learn and contribute actively.
• Availability for rotating 12-hour shifts.
• Qualification: NITEC/Diploma in Mechanical/Electrical/I&C Engineering.

Your experience includes:

• Minimum 3 years of experience in Facility Operation and Maintenance in a semiconductor/wafer fab/electronic manufacturing plant.
• Hands-on experience and good knowledge of troubleshooting Electrical Distribution, Motor Control Center, VSD, ACMV systems, and Building Services.
• Computer skills in MS Office (Word, Excel, PowerPoint).

Location:

Our Woodlands site is one of the largest electronics manufacturing sites in Singapore, housing our Recording Media Operations (RMO). Spread over three sites, it is easily accessible by Public Transport (bus/MRT). Ample free on-site parking lots are also available. Here at work, you can enjoy breakfast, lunch, dinner and snacks at our on-site canteen and nearby coffee shops. We offer a range of employee welfare facilities including an in-house gym and dance studio, as well as after-work badminton and table tennis competitions. On-site celebrations and community volunteer opportunities are also available at your choice of interest.

We are looking for Mechanical Engineer :

Job Description:

- Provide support to operations maintenance staff in their work flow, maintaining, repairing and installation of HVAC units and Refrigeration systems. (Main tasks of the job scope)

- Mechanical general work

- Other ad-hoc duties as assigned

Job Requirements:

- Monday to Friday, 8am to 5pm

- Saturaday, 8am to 12pm

- Must be able to support OT on weekdays / weekends if needed

Interested applicant, please resume to [email protected]

Job Description

• Perform full set of accounts with daily accounting & finance duties including receivables and payables processes, general ledger, tax and bank reconciliation, bank receipts, etc.
• Oversees Clients by issuing monthly maintenance and adhoc sales invoices to clients and monthly SOA.
• Chasing payment (AR) and send monthly AR aging report to directors.
• Update Monthly Project Summary & Adhoc Summary
• Monitor/check supplier's AP invoices and make payments
• Monitor daily cash balances to ensure sufficient funds for operational need.
• Prepare/compute monthly payouts for Supervisors and workers and pass to HR for payroll processing.
• Prepare Quarterly GST submission.
• Support audit and tax queries
• Manage timely closing process and reconciliations, including for intercompany transactions;
• Prepare monthly financial and management reports

Requirement

• Degree or Diploma in Accounting & Finance or equivalent;
• At least 5 years of experience in accounting & finance;
• Strong understanding of accounting principles;
• Ability to work in a dynamic environment;
• Ability to work independently with a high degree of accuracy and efficiency;

Salary: $2600 for first 3 months. After confirmation is $2700

Industry: Engineering

Located at Tuas

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Job Descriptions:

• Responsible for metal materials loading and unloading
• Deliver the metal materials to workshop
• Assist packing materials for delivery

Requirements:

• Forklift License required
• Basic technical knowledge in handling metal materials
• Training will be provided
• Machine shop working environment
• 5-day work week

The School of Civil and Environmental Engineering (CEE) is a leading school for Sustainable Built Environment. The School plays an integral role in spearheading tertiary education, advancing research innovations and providing professional services in a number of key disciplines in Civil and Environmental Engineering and Maritime Studies fields, with the objective of contributing to the technological and economic advancement of Singapore and beyond. The School’s mission in research is to achieve excellence by providing a conducive and intellectually stimulating environment to enable high quality work in strategic directions that are of significant impact to industry, science and technology.

For more details, please view School of Civil and Environmental Engineering | NTU Singapore.

We are looking for a Research Fellow to support the research for the project titled “Development of Durable, Jointless and Reduced Embodied Carbon ConFlexPave for Port Use”. The role will focus on carrying out research according to the proposed milestones.

Key Responsibilities:

• Work on a project to conduct the research on development of durable, jointless and reduced embodied carbon ConFlexPave for port use.

Job Requirements:

• PhD degree in Engineering, Material Science or Chemistry or related field
• Previous experience in chemical synthesis and analysis, concrete sample preparation, mechanical testing and microstructural characterization (XRD, TGA, FTIR and SEM-EDX).
• Additional experience in carbon sequestration in cement-based material would be preferable, but not required.
• Strong academic standing with several publications in reputable journals
• Strong references from previous supervisors

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:-

• Provide sales support which includes quotation preparation, processing of orders and overseeing the delivery process to customers
• Maintain close communication with customers
• Perform some administrative duties and multi-task other duties as assigned

Requirements:-

• Minimum Diploma in Engineering or equivalent
• Possess 2 years of experience & familiar with commercial documentation. Those who have worked in Marine or Oil & Gas industries will be an advantage
• Matured personality, dynamic, self-motivated and result-oriented
• Able to work independently with min supervision
• Positive attitude and good personality
• Able to work in tight schedule and under pressure
• Proficient in MS Office

We are looking for Electrical Engineers to expand our team.
Candidates with no experience are welcome to apply.

Responsibilities:

• Draw or modify electrical and GA diagrams or write engineering specifications to clarify design details and functional criteria of the equipment with respect to customers' requirement
• Conduct inspection and quality check of electrical equipment
• Conduct installation and troubleshooting of electrical equipment
• Set up and operate test equipment for calibration or configuration of electrical equipment
• Keen mind on quality management, with good documentation, continuous improvement of processes.
• Keen mind on operational planning to ensure good continuous supply of equipment for customers and internal requirement
• Support sales personnel for technical clarifications with customers
• Involve in pre-sales activity of machinery sales, e.g. sizing of generators, studying of tender documents etc.

Requirements:

• Minimum Diploma in Electrical Engineering or any relevant course
• Candidates with no experience are welcome to apply
• Ability to read and amend schematic drawings & circuit drawings
• Experience and knowledge in generators a plus
• Excellent interpersonal and communication skills

• Transport clients and/or packages to and from destinations
• Arrive at destinations on schedule
• Fulfill administrative needs, like office pickups
• Interact with clients professionally at all times
• Ensure that the vehicle is always fueled and ready for use
• Arrange for vehicle repairs as needed
• Keep mileage records and repair records up-to-date

• Transport clients and/or packages to and from destinations
• Arrive at destinations on schedule
• Fulfill administrative needs, like office pickups
• Interact with clients professionally at all times
• Ensure that the vehicle is always fueled and ready for use
• Arrange for vehicle repairs as needed
• Keep mileage records and repair records up-to-date

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Prepare import/export documents
• Coordinate with vendors/customers for delivery arrangements
• Work with logistics partners to ensure timely and accurate shipments
• Ensure shipment documents comply with customs regulations
• Ensure timely invoicing of shipments as per company KPIs
• Maintain accurate and up-to-date shipping records
• Monitor production schedules and release work orders to meet shipment deadlines
• Prepare and review quotes based on customer requests
• Review contracts to ensure consistency with quotes
• Support purchase order generation, order confirmation, and delivery

Requirements:

• Minimum GCE O level
• Minimum of 1 years of work experience as Administrator
• Preferred with knowledge of SAP
• Must be detail-oriented and strong organizational skills
• Competence with Microsoft Office
• Good personality and able to handle customer queries

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Job Summary:

We are seeking a dedicated and skilled Workshop Executive to manage the fleets of vehicles maintenance project. The successful candidate will be responsible for overseeing the maintenance, repair, and efficient operation of our vehicle fleet, ensuring all project milestones and deadlines are met.

Key Responsibilities:

• Manage the day-to-day operations of the Automotive workshop, including scheduling and supervising maintenance and repair activities.
• Ensure all vehicles are maintained in optimal condition and comply with safety standards.
• Coordinate with suppliers and vendors for parts and services.
• Monitor and manage the fleet budget, ensuring cost-effective operations.
• Maintain accurate records of all maintenance and repair activities.
• Develop and implement preventive maintenance programs.
• Train and supervise workshop staff, ensuring high performance and adherence to safety protocols.
• Collaborate with other departments to ensure the smooth execution of the project.

Requirements:

• Diploma in Mechanical Engineering, Automotive Technology, or a related field.
• Proven experience in fleet management, vehicle maintenance, and workshop operations.
• Strong knowledge of automotive systems and repair techniques.
• Excellent organizational and project management skills.
• Ability to lead and motivate a team.
• Strong communication and interpersonal skills.
• Proficiency in using fleet management software and tools.
• Ability to work under pressure and meet tight deadlines.
• Valid driver’s license

Job Description

If you are engineering trained, independent, self motivated and good team player, come join us as a Sales & Application Engineer.

• The candidates should be engineering trained.
• He/she is to maintain good relationship with existing customers and develop new businesses for the sale of company products (e.g. pumps & spare parts).
• Knowledge of handling tender documents, technical documentation and manual would be an added advantage.
• Daily tasks includes the handling of RFQ, attending to technical queries, provide technical solutions etc.
• Travelling within the region may be required.

Requirements

• Minimum Certificate in Engineering.
• With or without relevant experience as training will be provided.
• Possess a valid class 2/3 license would be an added advantage.
• Good engineering knowledge and self-motivated.
• Able to work independently, yet a good team player with positive work attitude

Remarks : Well performed candidates may be selected for overseas training.

1) Full Set of Accounts Management:

- Responsible to manage and maintain the full set of accounts.

- Ensure accurate and timely recording of financial transactions.

- Support monthly, quarterly, and annual financial statements and reports.1

2) Accounts Payable and Receivable:

- Handle all aspects of accounts payable and receivable.

- Perform bank reconciliations and monitor cash flow.

- Handling and developing improvement processes in overall General Ledger account including managing subledger of AR, AP, and Inventory account, Intercompany transaction, account revaluation and depreciation.

- Update the receipt entries in the accounting system on daily basis

- Manage accounts payable and receivable functions, including invoice processing and follow up to the clients with regards the outstanding AR in timely manner.

3) General Ledger Maintenance:

- Maintain and reconcile general ledger accounts.

- Ensure compliance with accounting standards and regulations.

- Prepare and post journal entries as required.

4) Financial Reporting and Analysis:

- Assist in the preparation of budgets and forecasts.

- Conduct financial analysis to support business decisions.

- Prepare ad-hoc financial reports as needed.

5) Compliance and Audit:

- Ensure compliance with local tax, GST regulations and filing requirements.

- Ensure quarterly GST submission is accurate and submitted on timely basis

- Assist with internal and external audits.

- Maintain accurate and organized financial records.

6) Human Resources Functions:

- Support monthly payroll and incentive calculations.

- Process staff claims and reimbursements.

- Maintain and organise personnel records and filing.

JOB REQUIREMENTS:

Bachelor’s degree in Accountancy/Finance strongly preferred.

Minimum 3 years of full set accounting experience.

Meticulous and organized.

Proactive and independent

Possess excellent communication and interpersonal skills

CPA/ACCA/CA or equivalent is a plus point

Strong technical skills and ability to work in a fast-paced environment, having good oral and written communication skills and be analytical, independent, and proactive

Experience with Xero and Quickbooks is a plus