Roles & Responsibilities

Job Responsibilities

· Lead and drive the team for continuous improvement on system and process, conduct monthly QPR meeting and review typical quality issues and follow up with team for improvement.

· Work as quality representative of tool room to manage customer audit, ISO audit and internal audit, prepare the team for the audit and subsequent activities.

· Monitor KPI of tool room and attend annual MR meeting to report tool room KPI performance.

· Lead QA/metrology team for inspection activities and work closely with engineering team for tool improvement.

· Study critical characteristic of new product drawing requirement, propose steel safe strategy with past similar tool experience into tooling design.

· Manage customer complaint and attend customer meeting related to quality or metrology issues.

· Monitor supplier quality performance and issue corrective and preventive action report to drive continuous improvements.

· Perform audits on supplier’s process to ensure quality control and quality assurance systems are in place

· Publish tool fabrication quality standards and ensure suppliers understood and comply with the requirements

· Assist in evaluation and qualification of new supplier.

· Other duties as and when assigned by Supervisor or Management

You may be authorized to:

· Contain suspected, non-conforming products and prevent from further processing.

· Stop new orders which do not conform to requirements.

Requirements

· Degree or Diploma in Quality Engineering or relevant

· Minimum 5 years of relevant experience in a plastic injection molding industry

· Knowledge and experience in GD&T, SQC tool

· Certified Internal Auditor for ISO 9001, ISO14001 and ISO 13485.

· Ability to apply problem solving technique and provide solutions under minimal supervision.

· Good written and oral communication skills

· Organized, decisive, logical, Independent and possess leadership, organization and communication skills

Roles & Responsibilities

Requirements:

• Candidate must possess at least a Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering or equivalent.
• At least 7 Years) Working experience in the related field is required for this position.
• Required Skill(s): Project Management
• Preferably, a Manager specialized in Engineering - Civil/Construction/Structural or equivalent.
• Singaporean/SPR

Responsibilities:

• Monitor and manage the day-to-day operations of the project, or function, including developing and monitoring budgets, coordinating activities with other subcontractors
• Handle contractual matters that arise
• Check drawings and quantities and ensure that these are accurate for the execution
• Oversee the selection and requisition of materials required at the site.
• Plan the work schedule and efficiently organize the site facilities to meet an agreed program of deadlines;
• Liaise with consultants and/or sub-contractors engaged in the project;
• Attend regular meetings with owner/client/contractors/sub-con and ensure the progress is on schedule;
• Oversee quality control and safety matters on the site;
• Resolve any unexpected technical difficulties and other problems that may arise
• Overall responsible for the execution of the projects
• Monitor the cash flow and budgeting of the project
• Accountable for the project’s projected profit
• Identify and comply with all applicable statutory/regulatory requirements for the project under his/her jurisdiction.
• Monitor work progress to ensure the project stays on schedule.
• Ensure in-progress inspection and joint inspection Monitor work progress to ensure the project stays on schedule.
• Carry out in-progress inspection and joint inspection
• Conduct safety and environmental risk assessment of projects handled
• Ensure staff work in a safe and orderly manner
• Ensure toolbox meetings are carried out for the project.
• Identify QEOHS training needs of subordinates

Organizational Relationships: • Reports directly to Project Director.

Authorities: In charge of planning, executing, and finalizing projects according to strict deadlines and within budget. This includes acquiring resources and coordinating the efforts of team members and third-party contractors or consultants in order to deliver projects according to plan. In addition, the Project Manager will also define the project’s objectives and oversee quality control throughout its life cycle.

Responsibilities:

1. Typical duties will include but not be limited to the preparation and/or modification of the following:

• Civil/Structural engineering plans, design, and layout.
• Civil/Structural project specifications.
• Civil/Structural engineering portion of project proposals.
• Civil/Structural engineering portion of project cost estimates.

2. Provide drawing for own designs and produce sketches to incorporate in drawings by drafters.

3. Develop probable construction cost estimates for projects.

4. Use computer-assisted engineering design and software and equipment to prepare engineering design documents.

5. Perform field activities such as observe and record existing field conditions, take and verify measurements within project

area.

6. Direct and manage project development from beginning to end.

7. Define project scope, goals and deliverables that support business goals in collaboration with senior management and

stakeholders.

8. Develop full-scale project plans and associated communications documents.

9. Effectively communicate project expectations to team members and stakeholders in a timely and clear fashion.

10. Liaise with project stakeholders on an ongoing basis.

11. Estimate the resources and participants needed to achieve project goals.

12. Draft and submit budget proposals, and recommend subsequent budget changes where necessary.

13. Where required, negotiate with other department managers for the acquisition of required personnel from within the

company.

14. Determine and assess need for additional staff and/or consultants and make the appropriate recruitments if necessary

during project cycle.

15. Set and continually manage project expectations with team members and other stakeholders.

16. Delegate tasks and responsibilities to appropriate personnel.

17. Identify and resolve issues and conflicts within the project team.

18. Identify and manage project dependencies and critical path.

19. Plan and schedule project timelines and milestones using appropriate tools.

20. Track project milestones and deliverables.

21. Develop and deliver progress reports, proposals, requirements documentation, and presentations.

22. Proactively manage changes in project scope, identify potential crises, and devise contingency plans.

23. To carry out any tasks that is required by Management and as assigned for upholding the ISO 9001: 2008 and OHSAS

18001:2007 Intergrated Management System.

Qualifications:

1. Educational Qualification: Bachelor Degree in Civil Engineering or equivalent.

2. Relevant Experience: 2 years in project management, with special focus on structural engineering.

3. Computer Literacy: Advanced experience with Microsoft Office, AutoCad and StruCad and Project Management software.

Competency Requirements:

In a multicultural environment / work force, the incumbent should:

• be proficient in English
• have strong interpersonal skills, including written and oral communication skills.
• be persuasive, encouraging, and motivating.
• possess the ability to defuse tension among project team, should it arise.
• possess the ability to effectively prioritize and execute tasks in a high-pressure environment is crucial.
• possess the ability to read communication styles of team members and contractors who come from a broad spectrum of disciplines.
• possess the ability to shift priorities, demands and timelines through analytical and problem-solving capabilities.
• react to project adjustments and alterations promptly and efficiently.
• possess the ability to elicit cooperation from a wide variety of sources, including upper management, clients, and other departments.

To start a new Electrical Motors, Generators repair services.

Looking for experience Engineers, Service Oriented, Electrical Workshop Managers, to take charge of a new project. Experience with Marine, Oil & Gas, Explosion-proof equipment.

To make full planning, to recruit, train and build up the team. Setting up full repair and testing requirements.

Pls whatsApp: 9832-1639

Job Title: Senior Excavator Operator
Company: WF2 Engineering Pte Ltd
Location: Singapore
Industry: Construction (Plumbing & Sanitary)

Job Role:

We are seeking a highly skilled and experienced Senior Excavator Operator to join our dynamic team. The ideal candidate will play a critical role in ensuring the efficient and safe excavation operations for various construction projects related to plumbing and sanitary systems. As a Senior Excavator Operator, you will lead a team of operators, ensuring all excavation work is performed with precision and in compliance with safety regulations.

Key Responsibilities:

• Operate and manage various types of excavators to carry out excavation works for plumbing and sanitary system installations.
• Supervise and provide guidance to junior operators and ground crew to ensure tasks are executed correctly and safely.
• Inspect and maintain excavator equipment to ensure optimal performance, conducting routine checks and reporting any malfunctions or maintenance requirements.
• Coordinate with project managers, foremen, and other construction teams to ensure seamless workflow and adherence to project timelines.
• Follow and enforce all safety protocols and construction site regulations to minimize risk and prevent accidents.
• Plan and execute excavation work in a precise manner, considering site conditions and project specifications.
• Ensure proper digging, trenching, and backfilling techniques are followed to protect plumbing infrastructure.
• Document and report daily excavation activities, including progress, equipment status, and any issues encountered on-site.

Requirements:

• Minimum of 5 years of experience operating excavators in the construction industry, with a strong emphasis on plumbing and sanitary projects.
• Valid Class 4/5 driving license and certification in excavator operation (e.g., WSQ Heavy Construction Equipment Operation).
• Proven track record of managing excavation operations safely and effectively.
• Excellent knowledge of excavation techniques, trenching, and site safety procedures.
• Strong leadership abilities with experience guiding a team of operators.
• Ability to interpret construction plans and work efficiently under pressure.
• Strong communication skills and the ability to collaborate with diverse teams.
• Proactive, detail-oriented, and committed to quality work.
• Physically fit and able to work in outdoor environments and challenging conditions.

Should be approachable and motivating.

Good supervisor can also uphold standards, talk honestly to employees about their performance and be able to discipline when needed.

Communication and interpersonal skills are also vital to the success of managers.

might need to act mainly as a project supervisor when approaching a deadline, or they may need to prioritize their role as a recruiter in response to the creation of new positions due to an expansion.

• Office Management – oversee that the office is clean, productive, and organized. Ensuring that the office is organized, all the amenities are properly functioning, and the equipment is in working order forms part of the day-to-day activities of an admin executive. Admin executives ensure that the other personnel in the office can do their duties efficiently.
• Communication – handle the communication responsibilities of the office. Inbound and outbound communications pass through the administrators. Communication between various teams in the organization also passes through the administrators, who also coordinate with various suppliers for the infrastructural facilities of the office.
• Coordination – coordinate the functions of various teams to ensure collective productivity. They also ensure that the teams know each other’s roles in a project, ensure deadlines, manage calendars, etc. Admin executives also handle meetings between different departments and vendors. Furthermore, They also handle travel-related responsibilities for their employees for on-ground projects, meetings, etc.
• Administrative Support – Admin executives also provide support in various tasks around the office and are the ones that employees turn to in case of grievances and requests. They also ensure that an adequate workforce is always available for the projects.
• Documentation and Recordkeeping – Admin executive qualifications must instill the necessary knowledge in individuals to maintain the necessary records and documents the organization needs. Employee information, project details, etc., are maintained by the administrators. They also maintain records of all the transactions done on behalf of the business.
• Event Planning and Management– Admin executives assist in organizing seminars, workshops, conferences, etc., for the organization. They oversee that such events can happen smoothly without any interruptions.
• Budget Tracking – Admin executives assist the organization in tracking its budgets over various heads, such as events, inventory stocking, etc. They also maintain records of departmental expenses and various cash outflows for the organization.

Job Title: QA/QC Engineer

Salary Range: S$3,400 – S$4800

Report to: QA/QC Manager

Min Qualifications / Experience :

1) Degree in Mechanical Engineering holder with 2-4 relevant experience

Job Skills Required:

1) Knowledge in Microsoft office applications such as Excel, Word, Power Point and

related spreadsheet software.

2) Must be able to work well with others in a team setting.

3) Ability to work independently.

4) Must be able to effectively handle many concurrent projects.

5) AWS, ASME AS, PD5500.

Duties & Responsibilities

a. Assist QA/QC Manager in the managing the QA/QC department.

b. Establish, implement and maintain the QC system for products that need to comply with ASME codes.

c. Prepare, control and maintain the QC Manual in accordance with ASME code.

d. Initiate quality programs and report to QA/QC Manager for the current product quality level.

e. Develop Inspection Test Plan (ITP), inspection and testing procedures.

f. Supervise and guide the team of QC inspectors and administrative assistant.

g. Control the usage of ASME stamps and review ASME’s MDR forms.

h. Maintain and control the welding procedures (WPS) and welder performance qualification records.

i. Any Adhoc assignment given by QA/QC Manager.

• Manage and lead a small team of 4 members to deliver the following HR services for internal stakeholders.
• Employee Assistance
• HR Information Systems
• Training and Development
• Career Development
• Organization Development
• Human Resource Planning
• Performance Management
• Selection and Staffing
• Talent Management & Succession
• Organization/Job Design
• HR Business partnering by having a deep understanding of our business Culture (Vision/Mission/Values/Principles) and ensuring that HR strategies and processes align and support our business goals. Inculcating this culture to all the staff during onboarding and orientation.
• Work with line managers to provide advice, support and follow-up on employee inquiries relating to administrative support, employee benefits, HR policies clarification and practices.
• Provide support to any other HR related project and duties as assigned.

finance executive.

account mothly closing.

perform monthly bank reconcililation.

perform coding of accounts.

prepare quarterly GST returns.

handle full cycle of recruitment matters.

manage full spectrum of monthly payroll processing and administration.

perform general HR adminisstrative function such as processing of work pass. preparation of appointment, confirmation letter, insurance claim for hospital, surgical and work injury compensation.

Responsibilities:

• Perform maintenance of marine electrical system/component in workshops and onboard vessels
• Supervise any workers being assigned for jobs completion
• Perform corrective maintenance and planned maintenance
• Perform electrical wiring, cabling and modification of electrical circuit
• Test electrical systems and continuity of circuits in electrical wiring, equipment and fixtures, using testing devices such as Multimeter, Insulation tester and Process calibrator
• Participate in the repair of electrical components in workshop and onboard ships.

Requirements:

· NTC/Higher Nitec in Electrical Engineering and related field.

· Preferably with at least 4-5 years working experience in electrical repairs and maintenance.

· Able to read electrical circuit drawings.

· Preferably to have experience in DC/AC motors, Generators, Switchboards and Circuit breakers.

· Experience in testing and calibration of high/low voltage equipment or fault analysis

· Able to perform troubleshooting and fault rectification during daily operations

· Positive-attitude and have initiative to perform all tasks being assigned

· Willing to work in outdoor condition e.g heat, oil and dust

· Willing to work in Changi area

· Only Singapore Citizens need apply

Other Information:

· Location: Changi

· Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT

· 5 days work week

· Working Hours: 7.45am-5pm

5.5 days per week

Mondays to Fridays: 8:00 AM to 5:00 PM

Saturdays: 8:00 AM to 12:00 PM

Work Location: 8 Gul Circle Singapore 629564

Competitive remuneration package

Supportive and collaborative work environment

Opportunity to grow and develop your skills

As a Welder, you will play an important role in ensuring the structural integrity and safety of our buses and trucks.

Your responsibilities will include but not limited to:

Performing cutting & welding jobs on buses & trucks

Carrying out accident repairs on buses & trucks

Fitting and fabricating body repair works on buses & trucks

To be successful in this role:

Minimum of 3 years of hands-on work experience in welding or a related field

A strong passion for delivering high-quality workmanship

Ability to work independently and as part of a team

Familiarity with safety standards and practices

If you meet the above requirements and are eager to take on this exciting and challenging role, we encourage you to apply today! To apply, simply click the "Apply" button.

We look forward to welcoming you on board.

Note: ONLY shortlisted candidates will be contacted for further selection processes.

Are you a skilled mechanic with experience in servicing and repairing buses and heavy vehicles? You just found yourself the right place! We are currently hiring a Workshop Mechanic for Heavy Vehicles and Buses to join our dedicated team. With us, you will have the opportunity to grow professionally and contribute to the success of our workshop.

5.5 days’ work week

Mondays to Fridays: 8:00 AM to 5:00 PM

Saturdays: 8:00 AM to 12:00 PM

Work Location: 8 Gul Circle Singapore 629564

Opportunity to work in a well-ventilated and well-lit repair workshop

Exposure to a wide range of bus and truck models

Continuous learning and skill development

Supportive and collaborative work environment

Competitive salary and benefits package

Your responsibilities will include but not limited to:

Perform servicing and repairs on buses and heavy vehicles

Conduct component overhaul as required

Carry out fault diagnosis to identify and address mechanical issues

To succeed in this role, you should possess the following qualifications and skills:

Minimum of 2 years of hands-on experience in servicing and repairing buses and heavy vehicles

Candidates with proven strong technical and diagnostic skills will be considered for a senior technician position

Possession of a valid Singapore LTA-issued Class 3 driving license will be advantageous

If you are a dedicated individual with a positive attitude, excellent technical skills and a desire to succeed, we would love to hear from you. To apply, click the "Apply" button

Let's drive excellence together.

Note: ONLY shortlisted candidates will be contacted for further selection processes.

Job Requirements

1) To Work as lead Engineer for Oil & Gas Project

2) Leading a Team of Electrical Engineers in Preparation & Review of Load lists, Single Line diagram of PCC, PMCC, MCC, DB's, Equipment Sizing Calculation, System Study through ETAP (Version 19.1) and Preparation & Review of Layouts like Hazardous Area classification, Lighting Layout, Cable and Power Layout, Substation Equipment layout, Earthing & Lightning protection Layout.

3) Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies

4) Preparation, Monitoring and Control Engineering Document Control List and expedite for delay/ approvals/resolution of open issues

5) Review and Ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team

6) Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.

7) Preparation of Material Requisition, Specifications, Technical Bid Evaluation for Electrical works.

8) Preparation and Compliance for Engineering Audit Requirements.

9) Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.

10) Technical assistance to construction activities and attending to Site Queries.

11)Reviewing Vendor Drawings for Transformers, Switchgears, Cables, Distribution Boards, Junction Box, LCS, Motors etc.

12) FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

13) Coordination with PMC / QP and Construction Coordination.

14) Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness and correctness in works

15) Inspecting various equipment like LV & MV Bus duct, LV & MV Switchgear, Cables, Transformer, AC / DC UPS

16) Field Engineering Support Activities to complete the task in accordance with the project schedule.

17) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

18) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelors’ Degree in Electrical Engineering

Experience

Preferably Minimum 15 years of experience

Software Requirements

ETAP, DIALUX, Auto cad, MS Excel, MS Word

Responsibilities:

• Responsible for day to day on-site project supervision for conversion/repair of commercial/repair vessels
• Ensure works daily assigned jobs are carry out effectively and productively in order to meet customer specification and requirements.
• To ensure quality assurance on works completed to achieve delivery deadline, target and no safety incident.
• Accountable for Safety for all workers and men under his charge.
• Ensure and enforce safety regulation and requirement are complied with
• Constantly seek improvement in productivity and processes in the course of work

Requirements:

• Diploma or NTC in Mechanical or Marine related fields
• Preferably 3 – 5 years of relevant working experience in marine industry for piping works
• Able to read piping diagrams
• Understanding of machinery equipment and its functionalities
• Understanding of marine classification requirements.
• Knowledge on piping material requirements for both repair and new construction
• Possess man-management experience in workshops and onboard vessels
• Able to work on weekends based on project needs
• Able to work under outdoor conditions - heat, grease and dust

Other Information:

• Location: Tuas Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Job Description:

• Able to read & interpret tender specifications/ drawings.
• Good knowledge of contract and QS procedures and pricing.
• Responsible for the preparation of a complete mechanical (Air Conditioning and Mechanical Ventilation) tender, including tabulate pricing, sourcing of supplier, BQ takeoff and Value Engineering, etc.
• Responsible for collating tender documents for submission.
• Perform administrative duties assigned.

Job Requirements:

• Diploma/ Degree in Mechanical Engineering.
• Minimum 3 years' relevant experience with proven track record.
• Interdependent with good communication skills.
• Must possess good working attitude with self-motivation and commitment.
• Possess competency in using Word, Excel, PDF converter, etc.
• Training provided for entry level candidates.

Responsibilities:

• Assist Engineer in coordinating and supervising maintenance and overhauling jobs
• Prepare Job Acceptance on completion of Jobs
• Monitor and update job status daily.
• Supervise mechanical / diesel / air-conditioning works
• Liaise with customers and contractors on works to be carried out
• Arrange for inspection / job acceptance
• Carry out general repair and maintenance jobs onboard vessels or in workshops
• Dismantle and troubleshoot for mechanical defects
• Perform testing of equipment to ensure smooth operation
• Perform test run and report to superior on the job completion status

Requirements:

• NTC in Mechanical/Marine/Automotive related field.
• Physically fit with good eyesight
• Possess basic understanding of basic components and functions of mechanical engines or diesel engines
• Able to use IMTE tools such as micrometer, bore gauge and torque wrench
• Able to read simple drawings and service reports
• Possess man management experience for up to 5 technicians
• Willing to work under outdoor environment on site
• Basic working knowledge in MS Word and Excel for status and reporting purpose
• Willing to work in Changi area, with company transport provided

Other Information:

• Location: Changi
• Transport provided at: Jurong West & East, Jalan Bahar, Choa Chu Kang MRT, Bukit Panjang, Woodlands MRT, Bukit Merah, Sengkang, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

• Update and ensure accurate maintenance of employee database, profiles and other HR-related information.
• Ensure on the necessary for a smooth onboarding of documentations for new hires or exit processes.
• Provide administrative support for all employment matters.
• Following up on course registration, after-training evaluation, etc and maintain up-to-date training forms/ records.
• Assist in planning, coordinate and organise company events. Includes sourcing and coordinating with external and internal vendors.
• Assist in managing the maintenance and housekeeping of office premises and equipment.
• Support the team in various projects and initiatives as needed.
• Assist with general administration of various departments within the organization and other ad-hoc tasks as assigned.
• Handle correspondence, including emails and phone inquiries, in a professional manner.

Important Notes:

• Ability to work independently and collaboratively within a team.
• Proficient in Microsoft Excel, Microsoft Word and Microsoft Power Point.
• Positive attitude and willingness to learn.
• Demonstrate workplace integrity and uphold respect, honesty, responsibility and accountability.

Employment Type: Full-time

About Us:
WF2 is a leading sub-contractor specializing in high-quality P&S infrastructure and building projects. We are committed to delivering excellence and seeking talented professionals to join our dynamic team.

Position Overview:
We are looking for an experienced Mechanical Drafter cum Quantity Surveyor (Plumbing & Sanitary) to join our team. This individual will be responsible for preparing detailed plumbing and sanitary system designs and drafts while managing project quantities, cost estimates, and budget monitoring. The ideal candidate will have a solid background in mechanical drafting, with a specific focus on plumbing and sanitary systems, along with strong skills in quantity surveying.

Key Responsibilities:

• Prepare detailed mechanical plumbing and sanitary system drawings using CAD software.
• Develop and review detailed plumbing and sanitary system layouts and specifications.
• Perform quantity take-offs, cost estimation, and budgeting for plumbing and sanitary works.
• Prepare and maintain accurate records of materials, labor, and associated costs for plumbing projects.
• Collaborate with project managers to ensure designs align with project requirements.
• Assist in reviewing contracts and tender submissions for plumbing and sanitary systems.
• Ensure compliance with local codes, regulations, and company standards.
• Monitor and track project progress, adjusting designs or estimates as needed.
• Provide support during the construction phase, including site visits and addressing technical queries.

Qualifications & Skills:

• Diploma or degree in Mechanical Engineering, Drafting, Quantity Surveying, or related field.
• Proven experience (1 years) as a Mechanical Drafter with a focus on plumbing and sanitary systems.
• Strong knowledge of plumbing codes, standards, and regulations.
• Proficiency in AutoCAD, Revit, and other relevant drafting software.
• Experience in cost estimation, quantity take-offs, and budget management for plumbing systems.
• Excellent communication, organizational, and time-management skills.
• Ability to work both independently and as part of a team.
• Detail-oriented and able to handle multiple projects simultaneously.
• Knowledge of building codes and safety regulations related to plumbing and sanitary systems.

Preferred Qualifications:

• Experience working with large-scale construction projects.
• Certification in Quantity Surveying.
• Familiarity with CAD and other technical skills required.

Responsibilities:

• Coordinate purchasing activities for materials and services based on company’s needs
• Handle quotation, issue purchase order and maintain updated records
• Track orders and ensure timely delivery
• Update internal databases with order details
• Conduct market research to identify pricing trends
• Evaluate offers from vendors and negotiate better prices
• Vendor sourcing activities
• Prepare reports – Price evaluation report, expenses report and etc
• Performs other duties as assigned

Requirements:

• Good understanding of supply chain procedures
• Hands on experience with purchasing software
• Computer skills in Microsoft Office Suite (Word, Outlook, Excel and Power Point)
• Meticulous “eye” for detail and accuracy
• Min. 2-3 years of work experience
• Min. Diploma or Bachelor’s degree
• Able to create and administer a task priority list based on company’s needs
• Desire to grow, take on new responsibilities and establish yourself on our team

Other Information:

• 5 working days, Monday to Friday (8.00am to 5.30pm)
• Two ways company transport provided at Boon Lay & Pioneer MRT station
• Permanent Full Time role

Job Description:-

• Assist in managing the overall project from concept to completion, including support in planning, scheduling, budgeting, and coordinating with stakeholders, while following the Project Quality Plan, Safety Management Plan, and Building Execution Plan.
• Assist in the preparation and management of project documentation, including drawings, specifications, and weekly progress reports.
• Work with design engineers for as-built drawings, section drawings.
• Supervise and monitor workers / welders on site for installation or maintenance.
• attend site meetings with clients / architects and authorities on project technical matters.

Requirements:-

• Minmum Diploma in either mechanical, Electrical or Construction Engineering or other relevant discipline.
• Required skill(s), MS Office, MS Project AutoCad.
• Has work experience in construction sites.
• Responsible team player with the ability to work independently in challenging projects and timelines.

Salary: $2600 for first 3 months. After confirmation is $2700

Industry: Engineering

Located at Tuas

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Responsibilities

• Lead EHS department.

• Develop, review, revise, maintain and implement EHS Management System.

• Ensure legal compliance as per statutory requirements.

• Conduct regular EHS inspections and audits.

• Manage contractor from the EHS perspective.

• To investigate all incidents on the work site and implement correction actions.

• Review and revise all risk assessments to ensure compliance.

• Able to drive EHS culture in the company

• Conduct routine checks on general safety practices and propose corrective actions and measures to be taken.

• Ensure adequacy, effectiveness and readiness of fire protection system and Emergency Response Team management system for Office and Factory.

• Ensure inspection and review of all project sites activities and operation and alert relevant Section Head of any machinery, equipment, appliance, activity or process used in each department that exposes any person to the risk of bodily injury, and to recommend appropriate corrective measures.

• Promote safe and healthy working conditions through education, awareness campaigns, training courses, drills, competitions, contests and other activities.

• Liaise with statutory bodies on EHSS-related licenses and permits and keep updated on the latest change in regulations and Acts and be conversant with all waste management regulations, procedures and licensing requirements.

• Conduct fire and safety training to employees.

• Constant update to management of EHSS performance and the continual improvement plan.

• Liaise with 3rd party security service provider and ensure the appropriateness and effectiveness of services rendered to organization.

• Constant plan-do-check-act on the related EHSS matter of plant's Environmental, Health and Safety Management System and ensure continual improvement/upgrading of the system.

Qualifications & Experience

• Relevant Qualification in Workplace, Safety and Health with 8 years relevant working experience in Construction Engineering Industry.

• Strong technical competency, good interpersonal and communication skills.

• Ability to work independently and target oriented in a stressful environment.

• Ability to interact effectively with colleagues in other business units.

Other info

• Engineering and construction company

• Salary $5,000 - $7,000

• 5-day work

Interested candidates, pls apply with resume in MS Word format

You may email to [email protected]

EA License No: 17C8809

EA Reg No: R1108561

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Assist in the design, development, and implementation of physical security systems, including access control, CCTV, and intrusion detection systems, for industrial facilities
• Ensure designs adhere to security-by-design principles and industry standards
• Conduct site assessments to identify security risks and recommend appropriate solutions
• Collaborate with cross-functional teams, including but not limited to clients and site team to ensure seamless integration of security systems
• Prepare technical documentation and reports as required
• Any other duties to be assigned from time to time

Pre-requisites

• Bachelor’s degree in Electrical Engineering or a related field
• Minimum 3 years of experience in electrical engineering with a focus on physical security systems in industrial plants or similar settings
• Knowledge of security-by-design principles and best practices
• Familiarity with industry standards for security systems (e.g., ISO 27001, UL 294)
• Strong problem-solving skills and attention to detail
• Excellent communication and teamwork abilities

Employment Type: Full-time

About Us:
WF2 is a leading sub-contractor specializing in high-quality P&S infrastructure and building projects. We are committed to delivering excellence and seeking talented professionals to join our dynamic team.

Position Overview:
We are looking for an experienced Mechanical Drafter cum Quantity Surveyor (Plumbing & Sanitary) to join our team. This individual will be responsible for preparing detailed plumbing and sanitary system designs and drafts while managing project quantities, cost estimates, and budget monitoring. The ideal candidate will have a solid background in mechanical drafting, with a specific focus on plumbing and sanitary systems, along with strong skills in quantity surveying.

Key Responsibilities:

• Prepare detailed mechanical plumbing and sanitary system drawings using CAD software.
• Develop and review detailed plumbing and sanitary system layouts and specifications.
• Perform quantity take-offs, cost estimation, and budgeting for plumbing and sanitary works.
• Prepare and maintain accurate records of materials, labor, and associated costs for plumbing projects.
• Collaborate with project managers to ensure designs align with project requirements.
• Assist in reviewing contracts and tender submissions for plumbing and sanitary systems.
• Ensure compliance with local codes, regulations, and company standards.
• Monitor and track project progress, adjusting designs or estimates as needed.
• Provide support during the construction phase, including site visits and addressing technical queries.

Qualifications & Skills:

• Diploma or degree in Mechanical Engineering, Drafting, Quantity Surveying, or related field.
• Proven experience (3 years) as a Mechanical Drafter with a focus on plumbing and sanitary systems.
• Strong knowledge of plumbing codes, standards, and regulations.
• Proficiency in AutoCAD, Revit, and other relevant drafting software.
• Experience in cost estimation, quantity take-offs, and budget management for plumbing systems.
• Excellent communication, organizational, and time-management skills.
• Ability to work both independently and as part of a team.
• Detail-oriented and able to handle multiple projects simultaneously.
• Knowledge of building codes and safety regulations related to plumbing and sanitary systems.

Preferred Qualifications:

• Experience working with large-scale construction projects.
• Certification in Quantity Surveying.
• Familiarity with CAD and other technical skills required.