About our Company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Supervise and ensure that mechanical work activities are performed in a safe and timely manner while adhering to specifications and codes
• Responsible for organising mechanical works, delegating tasks and managing workers on site
• Assist the Mechanical Engineers in planning and monitoring of construction work progress.
• Any other duties to be assigned from time to time

Prerequisites:

• Minimum 3 years' relevant work experience in construction industry
• Knowledge of static and rotating equipment and/or Steam or Gas Turbines
• Ability to manage and handle workers
• Possess a strong commitment to workplace safety

Responsibilities:

• Manage full sets of accounts, including the preparation of monthly management reports
• Compile year-end financial statements in compliance with regulatory standards
• Reconcile intercompany balance and oversee intercompany billings
• Prepare accurate cash flows forcasts to support financial planning
• Coordinate and facilitate audit process, collaborating with auditors as needed
• Perform ad-hoc tasks and assignments as required

Requirements:

• Diploma / Degree in Accountancy
• Minimum 3 to 5 years of relevant work experience
• Proven ability to work independently and efficiently under tight deadlines
• Exceptional attention to detail and accuracy
• Proficient in MS Excel and Word
• Available for an immediate start
• 
  

Responsibilities

· To only carry out any lifting operation when a lifting supervisor is present or has approved the carrying out of such operation.

· To only engage in acts or manoeuvres per the standard practice or company’s SOP.

· To ascertain whether the ground conditions, on which a mobile crane is to be operated, are safe for travel and suitable for any lifting operation.

· To only use the crane for operations for which it is intended.

· To only manoeuvre or hold suspended loads over public roads or areas after that road or area has been cordoned off.

· To ensure that any outrigger, when it is required, is fully extended and secured.

· Before the start of every work shift, perform operational tests on all limit switches under no load conditions before any lifting operation is carried out and enter the results of such tests in a form or checklist specified by the management.

· To report any failure or malfunction of the crane to the lifting supervisor.

· To ensure that any stationary truck-mounted or wheel-mounted crane is adequately and securely blocked on a slope.

· To only hoist objects for which the weight has been ascertained.

· To only hoist loads if the path of the manoeuvre is clear and to report obstructions, if any, to the lifting supervisor.

· To only hoist loads when a certified signalman has received a clear signal.

· Attend daily toolbox meetings with supervisors and workers for effective consultation, communication and coordination before the commencement of work.

· Perform any other tasks as may be assigned by the supervisor.

· Ensure compliance with relevant government regulations and the company’s quality, safety, health and environmental (QSHE) policies, practices and procedures.

Requirements

· Minimum 5 years of working experience in a similar capacity in marine or related industry.

· Knowledge and understanding of construction safety rules and procedures.

· Valid crane operator license.

· Physically fit due to the requirement to climb in and out of the crane cabin and to see and hear lifting supervisors, signalmen, HSE personnel etc.

· Good communication skills.

· A team player with the ability to work independently as well as in a team.

Job Description

• Prepare, manage, and facilitate design drawings utilizing BIM, Rino, Grasshopper and CAD technologies.
• Ensure all models are compatible and that BIM data is accessible to all project participants.
• Oversee coordination between architectural and structural interfaces, collaborating with main contractors and other trades for effective cross-team support.
• Work closely with the design team and other relevant departments to ensure all drawings meet design specifications.
• Manage design changes and revisions, addressing any discrepancies and queries between design and project teams.
• Attend site meetings as required and perform additional tasks as needed.

Requirements

• Degree in Architecture, Civil Structural Engineering, or a related field.
• Minimum of 4 to 5 years of relevant experience in construction and architectural projects.
• Proficiency in Revit, Navisworks, Rino, Grasshopper, AutoCAD, and MS Office.
• Knowledge of DGN, DWF, IFC, and MicroStation is a plus.
• Strong project management and decision-making skills.
• Ability to work effectively as part of a team as well as independently with minimal supervision.

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

Duties

• Manage daily productions and ensure efficiency of operations, including capacity planning, loading and optimization
• Monitor and day-to-day operations to ensure productivity by ERP system
• Planning and scheduling work deployments daily
• Communicate and report updates to Technical Director to review and support processes
• Development and oversight of staff appraisal and supervision systems
• Resolving performance issues among staff
• Handle customer concerns and resolving them immediately
• Ensure all machines are well maintained and coordinate servicing & repair with service team
• Develop operations-related plans, manufacturing budgets and policies & procedures to comply with ISO and AS standards.
• Review and propose new strategies to achieve better efficiency in production

Responsibilities

• Lead and direct business operations in alignment with company policies
• Manage plan changes, including internal and external communications, HR and related technical issues
• Oversee and drive the production team to meet company objectives and KPI.
• Reinforce internal policies, business planning, procedures and quality standards on all practices executed by staff
• Improve manufacturing capability, technologies and problem solving in conjunction with quality & engineering requirement
• Development of workforce plans including competency frameworks to meet operational requirements of organization
• Cultivate safeguarding against unexpected operational incidents that affect business continuity
• Undertake other tasks including administrative duties in connection with the post
• Perform ad-hoc duties as and when required
• Minimum 5 years of relevant experience in supervising in engineering production industry
• Experience in managing a workforce of 50 or more people preferred
• Advanced/Higher/Graduate Diploma/Post Graduate Diploma in Mechanical /Manufacturing Engineering field preferred
• Good interpersonal and communication skills in dealing with staff, clients and suppliers
• Efficient project management, problem solving & decision-making skills
• Takes initiative and is assertive/aggressive

Undertake a variety of projects, managing scope, cost, time, risk, resources, procurements, quality and communications in accordance with company policies, processes and procedures, whilst adhering to client contractual obligations. Regular client liaison will take place, managing expectations, and ensuring appropriate stakeholder satisfaction is apparent via pro-active management of project scope ensuring all milestones are met.

· Ensuring all assigned projects are administered in accordance with company’s Quality Management System and to agreed contractual obligations.

· Implementing projects according to contract terms, project goals and objectives, in a pro-active manner, including regular interface with all stakeholders such as clients, certifying authorities, contractors/suppliers and staff/personnel as necessary.

· Ensuring project definition is apparent, clarifying scope, estimates and assumptions with sales team during project handovers.

· Ensuring all appropriate projects are kicked off, their meetings are effective, congruent with the project scope and set the tone for success.

· Attendance to client meetings regarding appropriate project matters as and when required.

· Preparation of project plans in a timely manner.

· Creating and updating project schedules, ensuring critical path activities are understood and communicated.

· Ensuring project procurements are considered in terms of cost, time and quality.

· Understanding project commercial drivers and costs, controlling activities to limit adverse impact upon project finances.

· Preparation of documentation packs for workshop activities to enable efficient product realisation and mobilisation within time demands of the project, ensuring appropriate reviews take place with necessary personnel.

· Preparation of documentation packs for worksite execution (On/Offshore) ensuring appropriate reviews take place with necessary personnel including pre- and post-briefings.

· Ensuring the Design Engineering department is appraised of the project scope such that all engineering activities and calculations are carried out to verify the suitability of equipment

· Where contractually obliged, attendance offshore to assure project execution and fulfilment.

• Leading project planning sessions
• Coordinating staff and internal resources
• Managing project progress and adapt work as required
• Ensuring projects meet deadlines
• Managing relationships with clients and stakeholders
• Designing and signing off on contracts
• Overseeing all incoming and outgoing project documentation
• Participating in tender process i.e. design, submission and review
• Designing risk mitigation plan
• Conducting project review and creating detailed reports for executive staff
• Optimising and improving processes and the overall approach where necessary
• Securing growth opportunities and initiating new projects
• Managing large and diverse teams

• The preparation of the companies QA manual control and supervision of all amendments and revisions
• Control and the distribution of all the companies quality documentation
• Monitor all quality related activities on the project
• Perform all internal and external audits on behalf of the companies management
• Verify contractor quality requirements are specified to vendors and contractor documentation submittals.
• Attend all pre-bid meetings and coordinate all project requirements with the project bidders.
• Attend client quality management meetings
• The preparation and control of project quality system management documentation prior to project commencement.
• Review quality inspection personnel qualifications and training requirements
• Monitor the disposition of all issued nonconformance reports.

• Provides assistance to shipyard team and foremen
• Develops departmental plans, including production and/or organizational priorities
• Directs activities in areas of safety and personnel, production, scheduling, material handling and quality and ensures compliance with all Safety, Quality, Company and Regulatory directives
• Review and interpret designs, drawings & specifications
• Directs and coordinates shipyard operations within company policies and procedures
• Responsible for providing the quantity and quality of workers to meet schedule
• Directs all phases of steel fabrication, assembly and erection, piping fabrication and installation, outfitting
• Monitors the performance of assigned supervisors
• Maintains appropriate interface and relations with customers, paying detailed attention to site requirements
• Translates company strategies into tactical plans. Creates and prioritizes necessary resources and steps required to accomplish goals on time
• Establishes all shift production schedules
• Establishes and maintains shipyard production goals to ensure production schedules are met
• Schedules and conducts meetings in conjunction with Manager and Workforce
• Ensures product quality control goals are met
• Maintains a clean and safe work site

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.

Senior Supervisor Responsibilities:

• Making sure employees that report to you meet performance expectations.
• Giving instructions or orders to subordinate employees.
• Ensuring that the work environment is safe, secure and healthy.
• Meeting deadlines.
• Approving work hours.
• Ensure great customer service at all levels.
• Helping the team understand performance targets and goals
• Training or ensuring that workers are properly trained for their specific roles
• Scheduling work hours and shifts
• Coordinating job rotation and cross-training
• Sharing company updates, financial results, and new objectives with team members
• Assisting in resolving emergencies, such as a quality or customer problem that might be escalated to the team supervisor for handling

Senior Supervisor Requirements:

• Previous leadership experience.
• Excellent communication skills.
• Eye for detail and accuracy.
• Reliable, with high integrity and strong work ethic.
• Ability to work as part of a team.
• Professional appearance and attitude.
• Computer literacy.
• Proactive organizational skills.
• High school diploma.
• Ability to keep a positive attitude in a fast-paced environment.

• Reports to Safety Manager
• Implement, monitor & improvise site safety management system
• Support management in safety-related matters
• Ensuring compliance with regulatory and corporate HSE policy and requirements by conducting regular inspection and internal audits
• Proactive to lead incident investigation, address the control measures, and ensure that all incident reports are made in a timely manner.
• Oversee all general activities concerning HSE and Implementation of Health, Safety, and Environment (HSE) rules, regulations, and procedures of the company.
• Ensure that relevant HSE documents, reports, communications, and other requirements of HSE are kept properly in place.
• Ensure HSE complies with ISO
• Compile reports and presentation slides for management reporting

Job requirements:

• Minimum a Diploma in Workplace, Safety & Health or equivalent
• Attained MOM WSHO license
• Proficient in MS office, IT savvy (Google forms etc)
• Minimum 3 years post-registration & relevant practical experience in a similar role with LTA projects is mandatory for this position
• Experience in Civil road works and heavy lifting matters
• Location: Woodlands
• Project: LTA Viaducts

• Reports to Utility Manager
• Coordination between sub-contractors and construction team on excavation works, services diversion, and reinstatement works.
• Provide update of the progress of works in the construction site.
• Supervise subcontractors’ works as per work plan, timeframe, and as per required quality standard of work output.
• Monitor utilities and M&E work executed are in accordance to statutory requirements, construction procedures, and safe work practices.
• Assist other Engineers in preparing the programming of works, scheduling, and monitoring the progress plan.
• Any related works as assigned by superior

Job requirements:

• Bachelor’s Degree in Civil Engineering or equivalent
• Minimum of 2 years’ relevant experiences as Utility Engineer
• Candidate with relevant LTA infrastructure project experience is an advantage
• Knowledgeable with various Utilities, M&E works
• Self-motivated, independent individual and possesses great initiative
• Good interpersonal skills
• Proficiency in using Microsoft Office and Auto CAD is an advantage
• Location: Woodlands
• Project: Viaducts

Responsibilities:

• Manage and organize project documentation, records, and correspondence.
• Prepare reports, presentations, and meeting agendas.
• Handle general office administration tasks, such as ordering supplies and maintaining filing systems.
• Assist in scheduling and coordinating meetings, site visits, and project milestones.
• Record and distribute meeting minutes and follow up on action items.
• Support the team in tracking project timelines and deliverables.
• Act as the point of contact for internal and external stakeholders regarding administrative matters.
• Coordinate with vendors, consultants, and contractors to ensure seamless communication and documentation.
• Facilitate the flow of information between project team members.
• Process invoices, expense claims, and purchase orders related to project operations.
• Monitor and track project-related expenditures and maintain financial records.
• Manage calendars and appointments for team members.
• Ensure compliance with company policies and procedures in all administrative activities.
• Provide ad-hoc support as required by the project or management team.

Requirements:

• Diploma with 3-5 years of relevant working experience.
• Proficient in MS Office (Excel/Words/PowerPoint)
• Good communication and organizational skills
• Highly self-motivated, good working attitude and a good team player
• Independent with the ability to work with minimum supervision.

Job Description

- Ensuring the smooth day-to-day operation.

- To plan the job schedule for the workers and subcontractors.

- Monitor the progress of the job, record achievements and report to the manager.

- Troubleshoot any issues that occur on the construction site.

Requirements & Qualification

- Diploma / Degree in Engineering, Technical or Construction.

- Certifications in Project Management.

- Good planning, Leadership,and Problem solving.

• Report to Construction Manager
• Manage and oversee construction activities near existing SPPG tunnel/GTP
• Coordination between client, consultant and sub-contractor(vendors)
• Ensure compliance with safety procedure and regulations
• Carry-out regular inspections and regular checks of concerned construction activities
• Resolve technical and engineering issue
• Ensure proper documentation (including Risk assessment/Method statement) and record-keeping of construction activities
• Ensure the activities comply with the local Authorities’ quality, environment, health & safety requirements and Clients’ General Specification
• Ensuring Permit to Work (PTW) is verified and valid for assigned duties.

Job Requirements:

• Degree in Civil Engineering from a recognized university, accredited by the Singapore PE Board
• Registered Resident Engineer with IES and valid certification in Singapore (Mandatory)
• Minimum of 1 year of Engineering experience
• 2 years of experience in the supervision of construction projects preferred
• Progress oriented, team player
• Technical expertise and knowledge in Civil Engineering Construction especially piling/RC works
• Proficient in Microsoft Offic and Auto CAD
• Attained CSCPM/BCSS/Confined space/Work At Height
• Good interpersonal skills and hardworking
• Location : Woodlands
• Project : Viaducts

Responsibilities:-

• Provide admin support to operation as well as quality control & safety/health dept
• Assist in administrative duties and other duties as assigned

Requirements:-

• Minimum Diploma or equivalent
• Possess 2 years of experience preferably in oil & gas industry will be an advantage
• Matured personality, dynamic, self-motivated and result-oriented
• Able to work independently with min supervision
• Positive attitude and good personality
• Proficient in MS Office

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Responsibilities:

• Operate 4-5 axis CNC Vertical Milling Machines and Horizontal Boring Machines.
• Set up machines accurately, including tooling, fixtures, and workpieces, based on engineering drawings and job specifications.
• Keep up with the housekeeping requirements at the workstation.
• Carries out duties as assigned by Foreman.

Requirements:

• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre.
• Understanding of tooling criteria, machining applications and process documentation.
• Min ITE Technical Certificate, preferably in Precision Metal Machining.

Job Description

• To install, repair and maintain mechanical equipment both manually and with mechanical tools
• Fabricates parts and sub-assemblies of machinery and related mechanical equipment to drawing specifications, using bench fitting tools
• Dismantles, inspects and refits parts and reassembles mechanical equipment
• Assembles and installs new mechanical fixtures
• Follow strictly to Risk Assessment before work commencement
• Ensure personal safety and others
• Handle tools and equipment with care
• Co-ordinate with other processes for continuous work flow and smoother job completion within job schedule
• Maintain good housekeeping

Requirements:

• Relevant trade certificate or equivalent
• Related experience in mechanical/electrical works
• Able to speak and understand simple English
• Physical works required and able to carry heavy load
• Knowledge on how to use simple tools and principles of fitting
• General knowledge in basic marine/electrical fitting

Board Roles and Director Duties

Board’s Role

The Board’s role is to:

1. provide entrepreneurial leadership, and set strategic objectives, which should include appropriate focus on value creation, innovation and sustainability;
2. ensure that the necessary resources are in place for the company to meet its strategic objectives;
3. establish and maintain a sound risk management framework to effectively monitor and manage risks, and to achieve an appropriate balance between risks and company performance;
4. constructively challenge Management and review its performance;
5. instil an ethical corporate culture and ensure that the company’s values, standards, policies and practices are consistent with the culture; and
6. ensure transparency and accountability to key stakeholder groups.

Scope of Director Duties

Directors should be aware of their duties at law, which includes acting in good faith and the best interests of the company; exercising due care, skills and diligence; and avoiding conflicts of interest. Directors should also put in place policies, structures and mechanisms to ensure compliance with legislative and regulatory requirements, establish appropriate tone-at-the-top, desired organisational culture and standards of ethical behaviour.

While the duties imposed by law are the same for all directors, a listed Board will generally have different classes of directors (executive, non-executive and independent directors) with different roles:

• Executive Directors (EDs) are usually members of senior management, and involved in the day-to-day running of the business. Executive directors are expected to:

1. provide insights on the company’s day-to-day operations, as appropriate;
2. provide Management’s views without undermining management accountability to the Board; and
3. collaborate closely with non-executive directors for the long term success of the company.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Scope:

• Responsible for all cleaning in and around office buildings.
• Cleans floors and toilets
• Sweeping, dusting and clearing of rubbish
• Spot cleaning glass and windows.
• Any ad-hoc cleaning duties as assigned

Job Requirements

• Physically fit and able to perform heavy cleaning duties like sweeping, mopping and so on.

• Reports to Subcontracts Manager
• Quantity Survey for Subcontract Works (Civil)
• Prepare the tender document for new subcontract bidding
• Review of Subcontractor’s proposal
• Make a Subcontract Agreement
• Review Subcontractor’s payment claim and prepare payment response
• Budgetary review of Subcontractor’s claim issue
• Manage Subcontract issues from time to time
• Focus on site issues for site progression

Job requirements:

• Degree in Quantity Surveying / Civil Engineering or Equivalent
• Minimum 3 years of working experience in quantity surveying
• Strong communication & negotiation skills
• Proficient in MS Office
• Self-motivated and good leadership
• Location: Woodlands
• Project: Viaducts

About the Role:

We are seeking a seasoned Senior Product Development Manager with over 10 years of experience specializing in the design and development of automation products for bioenvironmental applications. This position focuses on driving innovative projects in Industrial Automation, Bio-Environmental Monitoring, and Consumer Electronics, managing the complete product development lifecycle to deliver high-quality, technically advanced, and manufacturable solutions.

You will bring in-depth knowledge of electronics, embedded systems, full-system automation, and mechanical integration to design and guide fabrication teams, producing innovative products and prototypes for industrial and academic clients.

Key Responsibilities:

1. Product Development & Lifecycle Management

• Lead the entire product lifecycle, from concept creation to batch mass production, ensuring on-time delivery and cost-effectiveness.

2. Circuit Design

• Design and develop high-performance analog, digital, and mixed-signal circuits, focusing on low-noise designs, high-resolution ADC/DACs, and high-speed communication interfaces.

3. PCB Design & Manufacturing

• Execute PCB design using tools like Altium Designer, incorporating Design for Manufacturability (DfM) and Design for Testability (DfT) principles.

4. Embedded Systems Development

• Program and debug firmware for microcontrollers (MCUs) and system-on-chips (SoCs), optimizing for performance and energy efficiency.

5. Data Communication Systems

• Develop robust communication protocols, including I²C, SPI, RS232, RS485, and other bus systems, integrating sensor networks and actuator controls.

6. Mechanical Integration

• Collaborate with and review mechanical designs using tools like SolidWorks and AutoCAD, ensuring seamless electronic-mechanical compatibility.

7. System Testing & Quality Assurance

• Conduct Design Failure Mode and Effects Analysis (DFMEA), tolerance analysis, reliability testing, and EMI/EMC validation to meet regulatory and quality standards.

8. Bio diagnostics

• Apply hands-on expertise in bio diagnostics, driving the development, testing, and optimization of diagnostic tools and processes.

9. Prototyping & Troubleshooting

• Oversee prototype development, testing, and root-cause analysis to resolve hardware and firmware issues promptly.

10. Interdisciplinary Collaboration

• Work closely with mechanical, software, and quality assurance teams to deliver integrated and cohesive product designs.

11. Documentation & Compliance

• Maintain comprehensive project documentation to ensure adherence to ISO standards and regulatory requirements.

Requirements:

Technical Expertise:

• Proficient in Altium Designer; experience with OrCAD or Eagle is a plus.
• Advanced programming skills in C, C++, and Python, with experience in embedded systems and RTOS environments.
• Strong knowledge of analog and digital design principles, including power electronics and high-frequency PCB layouts.
• Hands-on experience with microcontrollers, FPGA programming, and single-board computers (e.g., Raspberry Pi).
• Expertise in communication protocols: I²C, SPI, RS232, RS485, UART, and their applications in IoT systems.
• Experience in sensor integration, including temperature sensors, photo detectors, and flow meters.
• Proficiency in mechanical CAD tools for cross-disciplinary collaboration; SolidWorks and AutoCAD preferred.
• Practical experience in GUI development and familiarity with Linux-based environments (e.g., Ubuntu).
• Knowledge of P&ID diagrams, microfluidic system design, and control methodologies.
• Strong analytical and problem-solving skills, with expertise in (D)FMEA, design optimization, and quality management systems.
• In-depth understanding and hands-on experience in bioprocessing systems, particularly in E. coli detection and diagnostics.
• Expertise in developing and implementing diagnostic methods for microbial monitoring, including biosensors and other analytical tools.

Industry Expertise:

• Experience in water quality monitoring systems and microbial monitoring technologies.
• Familiarity with fluidic control systems, including valves, pumps, and flow control mechanisms.

Soft Skills:

• Excellent communication skills, with the ability to document and present technical concepts effectively.
• Proven ability to excel in fast-paced, collaborative environments.
• Proficiency in MS Office tools (Word, Excel, PowerPoint); experience with Power BI and Visio is a plus.