Job Description

> Performing electrical engineering work in analysis, design, development, running simulations, prototyping hardware, evaluation, planning, testing and operations;

> working with the end customer and/or systems engineers to gather requirements and convert them to engineering specifications;

> trouble shooting and repair the system hardware and software during real-time collection operations.

> On site electrical research, construction audits, field reviews

> Writing detailed and concise technical reports, feasibility studies, proposals, including written responses and instructions as required during all project phases

> Conducting all tasks in cooperation with internal clients and other engineering disciplines

> Managing and enhancing client relationships

> Maintain proper project documentation of the electrical work performed Job

> Other assigned tasks as requested

Job Requirements

> Minimum Diploma/ Degree in Electrical Engineering/Electronics/Automation Control or equivalent

> Responsible and committed.

> Good problem solving and troubleshooting knowledge using systematic approach

> Knowledge of AutoCAD software or electrical equivalent will be an advantage

> Ability to design electrical circuit and perform electrical calculations

> Knowledge and experience on wiring will be an advantage

>Self-motivated, highly resourceful and organized

Job Requirements

1. Proficient in both English and Mandarin are essential to understand documents and communicate with suppliers
2. Good attitude
3. Experience: No experience needed (on-the-job training provided)
4. Education: Secondary education and above (or equivalent)
5. Skill: Farmiliar with basic computer functions, Microsoft Word and Microsoft Excel

Job Description

1. Assist in data entry and administrative tasks
2. Assist in general office work

•Past Experience in M&E coordination and complete and hand over the project.

•Liaise with respective Main contractor / consultants and client on the intended designs and resolve issue in technical M&E CSD matters along with prefab DfMA coordination, Fabrication and site implication.

•Coordinate with other disciplines on site such as Architectural & Structural teams on design and project schedule of manufacturing and coordination and installations.

•Check the DfMA prefab drawing and highlight discrepancies to design and production team.

•Submission of DfMA Drawing and get approval from Maincon, Consultant and client. Close coordination with M&E Subcontractor to acknowledge the drawing and input their service installation and Off-site factory installation and site DfMA prefab module installation.

•Knowledge of Revit and CAD drawing.

•Understand and Familiarity with AGVs, AMRS, collaborative robot, Robot welding and Machine learning.

•Knowledge of control systems, sensors, actuators, electronics

•Familiarity with industry safety standards for machinery and robots is a plus.

•Learn and execute the production methodology, Learn the welding process and fabrication requirement.

•Learn the program for AGV and Laser cutting machine and Automatic Channel cutting saw.

•Learn the DfMA M&E modular production, M&E services compliance, requirements an installation method.

•On job training Able to understand design of electrical system and single line and Installation drawing, details and calculations.

•Communicate relevant project information to the project leaders/project team.

•Implement and monitor Quality Assurance items.

•Effectively manage time to ensure work is completed within established periods.

•Understand M&E services and testing commissioning.

Job Description:

• Ensure regular maintenance on his assigned crane i.e. properly greased, lubricated and regularly cleaned as to allow the crane stay operational at all times;
• Ensure before starting work, Crane Operator is to conduct daily safety check on his assigned crane including filling-up crane log book and lifting log book as per Ministry of Manpower guideline;
• Ensure appropriate valid lifting gears are used;
• Ensure to adhere site in-house regulations i.e. to hand-over the by-pass key to site lifting supervisor or site person in-charge prior execution of the job to avoid any safety violation;
• Report to Controller and/or Operation Staff for advice if there is any unsafe job requested by site;
• Ensure timely submission of completed Job Sheet or Time Sheet or Work Order;
• Follow operational procedures with due care and diligence;
• Undertake any other assignment related to his scope of work assigned by the HOD and/or Management whenever deemed necessary.

Job Requirements:

1. Possess valid crane operator licence from MOM with at least 3 years experience;
2. Punctual and hardworking;
3. Reliable team player.

Interested, please apply now or call us at 6799 5934 / 6799 5949

• Conceptualization and design of facades, including preparation of drawings and structural calculations.
• Delivery of technical presentations.
• Coordination with clients, architects, consultants, façade contractors, suppliers, and other project team members.
• Supervision of construction, site inspections, and training of constructors.
• Preparation of technical submissions, proposals, and documentation.

Job Description & Requirements • Assist the Project Manager and Site Manager in overseeing the day-to-day operations on site. • Assist in the planning and deployment of manpower and resources to meet operational needs. • Ensure works are carried out in accordance to the project schedule, quality requirements and safety policy. • Supervise performance of site crews and subcontractor. • Monitor work progress, identify and resolve ground issues when required • Ensure availability of materials and equipment on-site to meet operational needs. • Work with inspectors and QA crew to ensure quality workmanship. • Liaise with subcontractors for cladding replacement works. • Requirements: • Minimum diploma in Engineering • 3- 5 years’ of relevant work experience in Construction industry, ideally for main-contractor. • Understanding of project flow for Construction / Civil Engineering work. • Possess good communication skill and leadership quality to supervise workers and...

• Prepare and sort documents, keep record of completed work
• Provided routine office supports such as making copies, faxing, answering phones, prepares correspondence for mailing delivering and picking up correspondence.
• Update and maintain employee and department directories
• Respond to clients’ inquiries in a timely and professional manner
• Ordering of pantry and stationery supplies
• Handle enquiries
• To cover Receptionist duties as when required
• Any other ad hoc duties assigned

• Oversee daily warehouse operations, ensuring efficiency and accuracy.
• Manage inventory control processes, including stock-taking and monitoring.
• Lead, train, and supervise warehouse staff to meet operational targets.
• Ensure compliance with workplace safety and health regulations.
• Coordinate and liaise with various departments to optimize warehouse processes.
• Handle inbound and outbound shipments, ensuring timely delivery.
• Implement strategies to improve productivity and reduce operational costs.
• Resolve operational issues effectively to maintain seamless workflows.

•Working with Process Engineer & Engineering team on QC requirement.

•Documenting inspection criteria and quality plan.

•Work with QA, Process and Product team on corrective action with quality issue.

•Work with Process team on in-process audit and FQC audit.

•Control of Supplier Quality Assurance (SQA).

•Quality control of in-coming, in-process and out-going products.

•Assist in Project team/Construction team.

•Quality check on finishing work accordance to method of statement

•Prepare and compile report after inspection.

•Plan on construction site visit and liaise with Project Manager or Engineer

•Liaise with Authority for Certification

•Provide Training to workers accordance to method of statement.

•Knowledge of Revit/ Cad drawing.

•Past Working Experience in Main contractor and coordination MEP contractor able to produce CSD.

•Understand DfMA modular manufacturing and installation of MEP components.

•Review and fabricate models and drawings.

•Produce constructible 3D drawings and be able to translate them into 2D shop drawings.

•Understand the building Structural and Architectural and Mep services formation and installation.

•To assist the Project Managers / Factory Manager and project team with other tasks

•Prepare shop-drawings and follow-up subsequent comments returned by consultant and arrange for re-submission.

•Generate clash detection report and other relevant reports from 3D models.

•Model development, construction, documentation and production techniques.

•Examine and check drawings to ensure compliance with project requirements and specifications.

•Co-ordinate with engineers on drawings and documents for issue and filing

•Maintain Electronic File Naming Conventions and the overall drawing register in controlled documents.

•Liaise with engineers and architects on the preparation and coordination of documentation.

•Communicate relevant project information to the project leaders/project team.

•Implement and monitor Quality Assurance items.

•Effectively manage time to ensure work is completed within established periods.

Job Description :

· Document Control support for QA / QC records & documents

· Involved in Non-conformance investigation and follow through Corrective Action Reports

· Provide assistance to the quality team for Client and Internal reports.

· Monitor and update calibration register for all measuring equipment, and arrange recalibration as required

· Verification of Calibration Certificates

· Conduct compliance reviews to ascertain the level of compliance with relevant policies and procedures

· Generate and compile FA reports & documents for Customers

· Any other ad-hoc duties as assigned

Job Requirement :

· NITEC / Diploma holder with at least 2 years of experience in manufacturing / metal fabrication environment

· Able to multi-task and work independently in a fast-paced environment

· Demonstrate initiative, good planning and organizing skills, and attention to detail

· Possess good interpersonal and communication skills

· Understanding of QMS, EMS & OHASA system is an advantage

Other Information :

· Company transport at Gul Circle MRT & Choa Chu Kang MRT

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

We work with organizations to protect them from cyber threats. We help detect new unknown cyber threats through research, fortify networks, and defend critical information infrastructures. Our team consists of cybersecurity experts who use the advanced techniques and technologies to deliver cutting-edge solutions and services.

Responsibilities:

• Develop, refine, and implement cutting-edge algorithms for product research and development or solutions utilizing ensemble or artificial intelligence model workflows.
• Construct APIs to deploy models as microservices/containers.
• Lead architectural and technical design, prototyping, development, and reviews of complex data and algorithmic pipelines.
• Engage in communication and negotiation of technical and analytical solutions, as well as architectural designs, with a diverse range of stakeholders.
• Stay updated on advancements in data science.
• Produce comprehensive technical documentation.

Requirements:

• Strong understanding of machine learning, deep learning, and data science with some hands on experience.
• Proficiency in Python programming language and frameworks such as PyTorch and TensorFlow.
• Excellent problem-solving skills and ability to work in a fast-paced environment.
• Strong communication skills and ability to collaborate effectively with cross-functional teams.
• Proven ability to adapt to new technologies and learn quickly.
• Work location: near Jurong East MRT

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

ALATAS Crane Services Worldwide is a worldwide operating crane service specialist and offers crane related services and parts supply in the Ship-, Offshore-, and Construction industry.

With our global set-up of 14 offices worldwide, we offer field service, provide technical solutions for emergency repairs, large scale overhauls, load testing, inspections, component repairs, spare parts supply as well as supply of new cranes and upgrades to existing ones.

Our specialized Crane Service Engineers are professionals in their field and are available attend to crane problems throughout the world.

JOB DESCRIPTION:

• Assist with HR recruitment and general admin duties
• Assist with Data Entry
• Coordinate and maintain files for ISO and Quality audit.
• Other admin duties as assigned.

REQUIREMENTS:

• Candidate must possess at least an "O" Level or equivalent
• Willing to learn
• Preferably some experience in HR admin
• Proficient in English, MS office and Outlook
• For Singaporeans only

1. Preparing the project reports and guidelines as per the instructions of higher authorities.
2. Assisting senior engineers in conducting research, designing systems, and analyzing data of specific projects.
3. Identify the problems of execution of project and solve them using engineering principles.
4. Maintaining equipment and inventories of the organization.
5. Collaborating with co-workers to meet the goals of projects.
6. Ensure testing and quality control processes of the products.
7. Stay familiar with the advancement in technologies to develop the highly demandable skills.
8. Following safety guidelines and engineering parameters to executive the project tasks.
9. Participating in learning and development sessions to gain expertise.

Roles & Responsibilities

• Reports to Construction Manager.
• To assist in site supervision works.
• Coordinate internally with inter-department and externally with clients & consultants.
• Coordinating for the project planning, documentation and execution of works on site.
• Coordination,supervision & monitoring the progress of the project works on site,manpower mobilization, materials planning & ordering.
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required.
• Assist in the preparation of the project schedule and coordinate for all submission.
• Responsible for the quality inspection of the bridge structure.
• Produce weekly site progress report and necessary submission.
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• Ensure all legal requirements under Singapore laws are compiled and ensure all standard operating procedures comply with specifications quality standards statutory and regulatory requirements.

Job Requirements:

• Degree in Civil Engineering/relevant studied recognized by PE Board, BCA or IES registered Resident Engineer (RE).
• Minimum 5 years’ working experiences in marine sector.
• Familiar with costing, contract, regulations and building operations.
• Oversee all site projects operations, functions, and requirements.
• Able to handle AutoCAD or relevant drawings submission.
• Required skill(s): MS Office, M.S. Project, AutoCAD.

Responsibilities:

Prepare Electrical and Instrumentation design documents including:

• Lighting design and calculation.
• Preparation of lighting layout 2D and 3D drawings, Lighting circuit diagram.
• Earthing and Lightning Protection design and drafting of layout, section, and elevation drawings.
• Cable ladder, conduit, trunking, cable routing design. Preparation of 2D and 3D design drawings.
• Cable sizing calculation, prepare Electrical cable schedule
• Prepare material take off (MTO) for material purchase.
• Fire Alarm, CCTV, Card Access, Public Addressing system design, preparation of system schematic and Layout drawings 2D and 3D.
• Preparation of Instrument Location layout drawing
• Preparation of Junction box termination drawings, Instrument Loop diagram
• Preparation of instrument Hook up, typical installation details
• Preparation of instrument cable schedule

Design coordination with internal design disciplines such as Structure, mechanical, piping team for design interface issue

Attend 3D model review and coordination with internal discipline engineers to resolves clashes.

Attend site survey and provide design sketches such as cable routing, support installation details, etc.

Support project tender team for material take-off from client tender documents.

Attend factory inspection for E&I related material such as Fire alarm, CCTV, MCC, PLC system

Support construction site to raise material purchase request, evaluation vendor quotation, preparation of Material approval submission.

Support site testing & commissioning work such as fire alarm system, CCTV System, DCS loop check, etc.

Requirements:

• Minimum Diploma in Electrical or Electronics Engineering.
• 3~5 Year of relevant design experiences
• Fresh graduates are welcome to apply
• Minimum hands-on experience for using design software such as AutoCAD MEP (Electrical), AutoCAD Plant 3D, Navisworks Manage, DIALux.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructure, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

We are seeking an experienced and highly motivated Embedded Engineer to join our dynamic engineering team. The ideal candidate will be responsible for designing, developing, testing, and maintaining embedded systems for a variety of applications. You will work closely with hardware and software teams to integrate solutions that meet our customer’s needs while ensuring high quality, reliability, and performance.

Job Description

• Design and develop embedded systems and applications based on customer requirements and project specifications.
• Write efficient, optimized code for embedded systems in languages such as C/C++ or assembly.
• Develop, implement, and test embedded software on various platforms (e.g., ARM, or microcontrollers).
• Debug and troubleshoot embedded systems using tools like oscilloscopes, logic analyzers, and in-circuit debuggers.
• Conduct system performance analysis and implement software optimizations to meet power, speed, and resource constraints.
• Create unit tests and integrate automated testing into development processes.
• Document and maintain clear code, designs, and specifications for embedded systems.
• Collaborate with cross-functional teams, including hardware engineers, software developers, and QA engineers, to deliver high-quality embedded products.
• Participate in code reviews, maintain version control using Git, and follow industry best practices for embedded development.
• Stay up to date with emerging embedded technologies and continuously improve the design and development process.

Requirements

• Experience in firmware development on embedded systems using C/C++ and/or assembly
• Knowledge and/or experience in embedded system such as Arm-Linux
• Knowledge and/or experience in porting codes (especially assembly language) from Intel-Linux to Arm-Linux
• Knowledge in information security or networking standards is an added advantage.
• Knowledge in secure boot for NXP i.MX solution is an added advantage.
• Strong problem-solving skills and ability to work independently as well as teams.
• Excellent communication and collaboration skills.
• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Job Responsibilities:

• Oversee C&S design progress against schedule and budget on projects.
• Manage the interfacing with M&E contractors
• Coordinate with engineering consultant, review and comment its design drawings
• Monitor the design progress and statutory submission against project baseline program
• Implement corrective measures for identified distractions or issues.
• Review, negotiate and recommend for approval/disapproval on design change orders.
• Administer design subcontract including processing monthly invoices for payment.
• Coordinate and monitor status of design incentive/disincentive programs complying with provisions of design subcontract.
• Perform constructive reviews conforming design to prime contract requirements and proposal commitments.
• Coordinate and control design submittals for owner’s review and approval.
• Lead a design team for overall C&S and architectural design works, assist QS team for material takeoff and tendering, manage subcontractors and support site construction works
• Facilitate resolving design issues with owner.

Job Requirements:

• Degree qualifications in Civil and Structural Engineering
• Preferably 2 years of relevant expereince in the planning and design of major waste to energy projects or similar major projects
• Positive working attitude and ability to work in a fast-paced environment
• Well versed with C&S software

Key Responsibilities:

• Assist in designing and developing electrical systems, circuits, and components.
• Support the preparation of technical documentation, including electrical schematics, wiring diagrams, and reports.
• Conduct on-site testing, troubleshooting, and maintenance of electrical systems and equipment.
• Collaborate with cross-functional teams to ensure timely project execution.
• Adhere to safety and quality standards during installation and operations.
• Monitor and ensure compliance with relevant codes, standards, and regulations.

Requirements:

• Minimum Qualification: Diploma in Electrical Engineering or a related discipline.
• Strong interest in learning and applying electrical engineering principles.
• Basic understanding of electrical system design and troubleshooting.
• Good problem-solving skills and attention to detail.
• Strong communication and teamwork abilities.
• Ability to work in a dynamic and fast-paced environment.
• Optional: Proficiency in AutoCAD or similar software

Resposibilities

• Operate mechanical excavators efficiently and safely in accordance with site requirements.
• Conduct daily safety inspections, including cleaning and lubricating equipment as needed.
• Follow instructions from the Site Supervisor / Foreman to complete assigned tasks.
• Maintain a safe working environment by observing and reporting any unsafe site conditions.

Requirements

• Minimum 5 years of experience as a registered Excavator Operator.
• Possession of a valid Excavator Operator license.
• Proven experience with SP PowerGrid projects.
• Willingness to work overtime when required.

Electrical engineers design, develop, test, and oversee the manufacturing of electrical equipment and systems. They also manage projects, ensure safety standards are met, and collaborate with other engineers and technicians. Some of their responsibilities include:

• Designing systemsElectrical engineers design electrical systems for a variety of applications, including automobiles, aircraft, and power generation equipment. They also design and draft construction drawings.
• Managing projectsElectrical engineers manage engineering projects, including timelines, resources, and teams. They also track work progress to ensure projects are delivered on time and meet specifications.
• Ensuring safetyElectrical engineers ensure that installations and applications meet safety standards and are in line with customer needs. They also carry out work in accordance with safety procedures.
• CollaboratingElectrical engineers often collaborate with teams from other departments, so they need to be able to communicate complex ideas clearly.
• Analyzing performanceElectrical engineers perform quality and performance analysis on new and legacy systems. They also summarize data and report on test results.
• Preparing budgetsElectrical engineers examine the needs of new equipment, calculate costs, and help prepare budgets.

Electrical engineers should have strong organizational and communication skills, as well as problem-solving abilities, attention to detail, and a deep knowledge of electrical engineering codes and safety standards.

Assist the HR manager to oversee HR Department & manage the full spectrum of HR Functions and adminstration.

• Provide HR support to the Manager on recruitment, performance review, employee relations, compensation & benefits.
• Conduct orientation to new employees.
• General HR administrations, such as preparation of appointment letters, confirmation letters, memo and etc.
• Coordinate with Operations Department to evaluate on the next course of action after being notified of any disciplinary case.
• Conduct exit interview. (For foreign resignees)
• Liaise with relevant ministries and agencies to process Work Permit, S Pass, Employment Pass for Malaysians (TS), Non-Traditional Sources (NTS), People Republic of China (PRC).
• Implementation of HR policies and recommend appropriate practices to ensure consistency and long term substainability of HR policies.
• Carry out any other duties as and when assigned by immediate supervisor or higher management.
• Involved in recruiting process, in connecting workers, negotiations, explainations of contracts.
• To apply, renewal work permits, arranging medical checkups, purchase of security bonds, air tickets for repartiation and home leave employees.
• To apply and ensure MWOC is secured for employees.
• Monitor employee progress and stay abreast on company climate and culture, ensuring it stays positive and productive.
• Demostrate leadership abilities.
• To assist other departments managers when necessary to gain exposure in other areas.
• Undertake any ad-hoc projects assisgned by superior/management team from time to time
• To arrange for Medical/WICA insurance yearly renewal and process any claims pertaining to workers medical/wica case.

ob Description & Requirements

Responsible for maintaining the accounts of various entities

· Maintain full set of accounts

· Proper and timely accounting transactions in Xero accounting system including processing of AP/AR, receipts and accounting entries

· TT online banking and issue cheques

· Monthly payroll & CPF submission

· Bank reconciliations, staff expense claim & supplier payments

· Responsible for preparation and closing of monthly and annual financial statements

· Responsible for corporate tax and quarterly GST submission

- Knowledge of simple corporate secretarial duties eg. GST filing, New company name check, Corp Pass matters

- Develop and maintain a filing system

- Submit and reconcile expense reports and claims

- Carry out administrative duties such as filing, data entry, scanning and copying of documents etc.

- Checking and replying emails

- Able to be multi-tasked and work under tight datelines

- Any other administrative duties assigned from time to time

Requirements

Potential candidate who have admin experience is an advantage

Corporate Secretaries Admin or assistant experience is an advantage

Time management skills and ability to prioritize work

Proficient in MS Office

Proficient in ABSS accounting software

Able to assist in HR duties

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.