Responsibilities:

• Provide overall administrative support to ensure smooth running of Admin & HR Department
• Work closely with Project Team and provide HR & administrative support for Manpower allocation, worker accommodation arrangement, and etc.
• Handle all insurance policies and claims matters eg. Group H & S Insurances, Workmen Compensation Insurance and WICA claims
• Handle on-boarding and off-boarding process
• Plan, organize and oversee the execution of training programs.
• Update and maintain the list of Company’s Track Records for BCA renewal submission
• Keeping up with updates or revisions in ISO standards and handle ISO Certification auditing
• Maintain an up-to-date record of all company vehicles.
• Manage COE renewals, road tax payments, and insurance policies.
• Coordinate Company events on special occasions.
• Other ad-hoc duties as assigned by HR & Admin Manager

Requirements:

• Degree / Diploma in Human Resource, Business Administration or related discipline
• 2-3 years working experiences
• Good knowledge of Microsoft Excel, Words
• Willing to learn, meticulous and able to work under pressure

• Allocate work to contractors and subcontractors to facilitate the smooth workflow process.
• Assess the degree of hazards and risks to ensure workplace safety is maintained.
• Communicate with the management, contractors and sub-contractors on the adjustments to cost estimates.
• Conduct the negotiations during the course of the project in order to ensure issues are resolved.
• Control project scope to meet project objectives in order to enhance project deliverables and key work activities.
• Develop cost reduction strategies to enhance the overall value of the project.
• Monitor project costs to ensure the objectives of the project are achieved in accordance to building contract law.
• Oversee and ensure compliance with standards.
• Prepare tender and contract documents in accordance to the building and construction regulations.
• Prepare the cost analysis for the project in order to ensure the overall value is enhanced.
• Provide advice on contractual claims so that the project scope is managed.

Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

Roles & Responsibilities

• Provide technical advice and support for daily operational issues.
• Perform inspections of welding, structural fabrication, and piping systems to ensure compliance with industry standards.
• Review piping isometric drawings and verify that materials meet specifications.
• Coordinate and oversee NDT activities, including radiographic testing (RT), and ensure accurate results through proper witnessing and review.
• Conduct thorough inspections and assessments during plant shutdowns, documenting findings and reporting discrepancies.
• Assist in the development and implementation of quality control procedures.
• Participate in safety meetings and ensure compliance with health and safety regulations.
• Maintain accurate and organized records of inspections, reports, and certifications.
• Collaborate with engineering and construction teams to ensure design specifications are met.

Qualifications:

• Minimum of 3 years of experience in plant inspections or related fields, especially during shutdowns.
• Valid certification in at least one API area (API 510, API 570, or API 653).
• Knowledge and experience in welding inspection, structural fabrication, and piping materials.
• Proficient in MS Office and CAD/CAM software.
• Familiarity with industry standards and codes (e.g., ASME, ASTM).
• Experience with non-destructive testing methods (UT, PT, MT, VT) is a plus.
• Strong communication skills, both written and verbal, for effective collaboration with team members and clients.
• Ability to work in a fast-paced environment and manage multiple priorities.

Job Description & Requirements

• Assist the project manager in planning the project
• Assist the project manager in creating schedule for the construction project
• Supervise construction projects to make sure they meet technical specifications
• Ensure that construction projects are completed within planned cost and time
• Keep accurate records of material and labor costs incurred in the construction process
• Monitor the progress of the construction work and performance of subcontractors at the site
• Hold meetings with site workers and subcontractors on behalf of the project manager
• Convey information about the progress of the project and performance of the contractors to the manager
• Assist the project manager in the procurement of certain materials
• Assist the project manager in hiring and assigning tasks to laborers
• Assist contractors and Engineers in interpreting technical designs
• Educate site workers on safety procedures to be adopted at the site and make sure that they adhere strictly to safety standards
• Report accidents that occur at the construction site to the project manager
• Administer or make sure that first aid is administered to any injured construction worker
• Ensure the smooth day to day operation of work activities at the construction site
• Maintain good relationship with site workers, contractors, and suppliers
• Ensure that any change in project plan is executed by contractors
• Motivate all the participants in the project
• Ensure that the project is executed in compliance with local or state regulations
• Identify any potential problem at the site and work to prevent it.

2. SKILLS

Leadership

Quality Control

Architectural

Drawing

Electrical

Interpreting

Procurement

Compliance

First Aid

Construction Drawings

Team Player

Civil Engineering

Scheduling

• Design & model 3D skid system, skid structure, piping GA and other not mentioned shop drawing (cutting plan) for fabrication purpose.
• Maintain proper record for drawings and information.
• Proficient in operating CAD drawings software and drawing construction detailed design.
• Create drawings and models from written and verbal specifications obtained from Engineer.
• Reviewing and checking sketches and drawings for errors before being sent to productions, vendors, engineers, etc.
• Review drawings for completeness and accuracy.
• Systematically saving sketches and drawings on CAD library, keeping the server organized; updating files as jobs progress and revisions are made.
• Continually create, edit, and update standard details for use in projects.
• Complete task assigned by superior and performing other relevant duties when needed.

• Provide driving service in/out of workshop
• To shift vehicles in and out of workshop for repair and services after registration at counter
• To send vehicle to LTA inspection
• To arrange and park vehicle properly and orderly in docking area
• To conduct road test for vehicle as required
• To assist in handling/taking over of courtesy vehicle
• To assist in checking courtesy vehicle status
• To assist in collection and sending vehicles outside workshop
• To ensure docking area tidiness and cleanliness
• To assist Service Department with adhoc trips such as collection of payment/spares
• To assist in washing/cleaning of Service Department courtest vehicle

Requirements

• Class 3 & 4 Driving License

Job Summary:

We are seeking a dedicated and skilled Workshop Executive to manage the fleets of vehicles maintenance project. The successful candidate will be responsible for overseeing the maintenance, repair, and efficient operation of our vehicle fleet, ensuring all project milestones and deadlines are met.

Key Responsibilities:

• Manage the day-to-day operations of the Automotive workshop, including scheduling and supervising maintenance and repair activities.
• Ensure all vehicles are maintained in optimal condition and comply with safety standards.
• Coordinate with suppliers and vendors for parts and services.
• Monitor and manage the fleet budget, ensuring cost-effective operations.
• Maintain accurate records of all maintenance and repair activities.
• Develop and implement preventive maintenance programs.
• Train and supervise workshop staff, ensuring high performance and adherence to safety protocols.
• Collaborate with other departments to ensure the smooth execution of the project.

Requirements:

• Diploma in Mechanical Engineering, Automotive Technology, or a related field.
• Proven experience in fleet management, vehicle maintenance, and workshop operations.
• Strong knowledge of automotive systems and repair techniques.
• Excellent organizational and project management skills.
• Ability to lead and motivate a team.
• Strong communication and interpersonal skills.
• Proficiency in using fleet management software and tools.
• Ability to work under pressure and meet tight deadlines.
• Valid driver’s license

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum 5 years QA/QC experiences

· LTA Mrt experiences will be an advantages

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe,

the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology

and innovation to solve real-world problems and improve lives. Our dedication to excellence and our

strong track record have earned us a distinctive reputation for quality and trust as a global technology,

defence and engineering group, spanning across the aerospace, smart city, defence and public security

segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the

Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic

suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries,

critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep

domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity

engineering, digital authentication, SCADA protection, audit and compliance.

Tasks description

• Job Opening, Job Amendment, Sales Confirmation, Cost Transfer, Job Closing, Billing

• Treasury / Hedging

• Inventory

• Month end closing/ Reporting on CACL (Current Assets/ Current Liabilities)

• Projects incl ERP Harmonization/ Continuous Improvement/ Automation

• Ad hoc projects as assigned

Tasks Delivery

• Deliver task on time with quality as requested

• Willing to work OT (if required to deliver the work)

• Able to demonstrate thorough analytical skills process

• Able to think and work independently with minimum but clear guidance

Technical Skills Requirements:

• Hands on and familiar with Project Management / WBS in SAP

• Handling/Analyze Thousands of WBS data regularly

• Contract Assets/ Contract Liabilities

• Return on Capital Employed (RoCE) concept

• Orderbook concept

Other Requirements:

• At least more than 5 years of Financial Accounting and Business Controlling experience;

• Proficient with MS Excel, MS Powerpoint, SAP

• Knowledge on Project Costing/ WBS settlement will be preferred

• Strong business acumen, analytical skills and sound knowledge of accounting, taxation standards and relevant statutory requirements

• Able to work independently under high pressure with very limited resources

• Strong communication and presentation skills

• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Job Description

- Managing a part of the construction

project

- Assist in technical advice and supervision

for other members of the staff

- Planning day to day work program of the

project progress

- Ensure projects meets agreed

specifications, budgets as well as

timescales

- Authorizing technical drawings and

engineering plans

- Ad-hoc assignments

Job Requirements

- Diploma in civil engineering or equivalent

- Minimum 1 year experience in landed

property from start to finish

- Good communications skills

Job Overview

The Senior Contracts Officer will manage, negotiate, and administer contracts to ensure compliance with company policies, client requirements, and industry standards within the FPSO sector. This role is critical for supporting project execution, mitigating risks, and ensuring that all contractual obligations are met efficiently.

Key Responsibilities

• Contract Drafting and Administration:Prepare, review, and revise contracts, ensuring alignment with company standards and legal requirements.
  Maintain a comprehensive database of contracts and monitor their lifecycle.
  
• Negotiation:Support the negotiation of contract terms with clients, vendors, and subcontractors to achieve favorable terms.
  Resolve contractual disputes promptly and amicably.
  
• Compliance and Risk Management:Ensure adherence to legal, regulatory, and contractual obligations specific to FPSO operations.
  Identify and mitigate risks in contracts to safeguard company interests.
  
• Coordination and Communication:Collaborate with internal teams, including legal, procurement, and project management, to align on contractual terms.
  Serve as a liaison between the company and external stakeholders regarding contractual matters.
  
• Reporting and Documentation:Prepare detailed reports on contract performance, risks, and compliance.
  Maintain accurate records of contractual documents for audits and future reference.
  

Qualifications and Experience

• Education:Bachelor’s degree in Law, Business Administration, or a related field.
  
• Experience:Minimum of 10 years of experience in contract management, preferably in the oil and gas or FPSO industry.
  Strong understanding of commercial terms, legal frameworks, and industry-specific requirements.
  
• Skills:Proficiency in contract management software and tools.
  Excellent negotiation, analytical, and communication skills.
  Detail-oriented with a strong ability to handle multiple tasks under tight deadlines.
  

Preferred Qualifications

• Knowledge of FPSO design, construction, and operational contracts.
• Familiarity with international maritime and oil and gas regulations.
• Certification in contract management (e.g., IACCM, NCMA) is an advantage.

Responsibilities:

• To manage and monitor of daily project works, instructions and progress.
• Ensure a safe work environment on site
• Supervise all works, including Civil and architectural works, road works and utility diversion
• Track the progress and quality of work being performed by operations.
• Work closely with consultant, and sub-contractor.
• Supervision of construction works and handle coordination works at sites and ensured targeted completion dates are met
• Attend regular meetings with owner/client/contractors on the project related matters
• Ensure that the works are carried out in accordance with the Project Quality & Safety Plan, contract requirements, including drawings and specifications
• Create and maintain detailed project documentation
• Monitoring resources on site and ensuring that sufficiency, availability, and performance are aligned with the schedule.
• Ensuring that the works are carried out to schedule and in accordance to government regulations

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Assemble or fabricate mechanical parts, pieces or products using a variety of tools and equipment according to required specifications in a manufacturing organization

Organizes, coordinates, and supervises employees and activities within the fabrication department to ensure an effective and efficient fabrication operation that meets safety, quality, and production standards. Reports to Plant Manager.

Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, weld symbols, bills of materials, and other written instructions or procedures to accurately create equipment and products

Utilize handheld tools such as a hand held screw gun, drill gun, and grinders

Operate calipers, weld gauges, tape measures, and other welding hand tool

Maintain weld machines using preventative maintenance methods Continually evaluate weld machine performance and technology to improve cycle times

Maintain inventory of manufacturing product and welding consumables

Create specific weldment set-ups and fixturing to meet geometric requirements

Perform quality work checks to ensure the product meets quality standards

Identify product defects and complete appropriate documentation when defects are identified

Rework and/or repair welded parts and products according to engineering specification changes

Perform all work in accordance with quality standards and established safety procedures

Prioritize work flow through effective communication with management staff

Maintain a clean and safe work area

Engineering Project Managers are pivotal in steering complex engineering projects from conception to completion, ensuring that technical solutions are delivered on time, within budget, and to the required quality standards

Defining project scope, goals, and deliverables in collaboration with senior management and stakeholders

Developing detailed project plans that outline specific engineering tasks, timelines, and resource allocations

Coordinating cross-functional teams of engineers, designers, and technical staff to ensure project milestones are met

Managing project budgets, including cost estimation, budget tracking, and financial reporting

Ensuring compliance with industry standards, regulatory requirements, and company policies

Identifying, assessing, and mitigating project risks and issues throughout the project lifecycle

Communicating effectively with stakeholders to provide project updates, gather feedback, and make informed decisions

Conducting post-project evaluation to identify successful elements and areas for improvement for future projects

Continuously updating project documentation and maintaining accurate records for all project-related information

Leading and motivating project teams, providing guidance and support to foster a collaborative work environment

Leading and motivating project teams; assigning tasks and deadlines

Managing project budgets and resources, including adjustments as necessary

Identifying, assessing, and minimizing project risks throughout the project lifecycle

Directing the allocation of resources across various projects for optimal efficiency

Responsibilities:

• Liaise with sub-contractors, suppliers & other parties involved in the project.
• Liaise with construction/design team to prepare document for Request for Quotation (RFQ) or Open Tender.
• Assist Project Contract Manager with quantity surveying matters relevant to Sub-Contract, Works Order and Purchase Order.
• Project administration and documentation include preparation of interim valuations, pricing and agreement of contract variations, update claim submissions, preparation of final accounts.
• Sourcing for supplier and sub-contractor, collate price comparison and costing summary.
• Evaluation and certification of sub-contractors’ progress payments.
• Good knowledge of reading specifications and building drawings.
• Prepare project budgeting and costing reports.

Requirements:

• At least 2 years’ working experience in Quantity Surveying in main contractor
• Experience with LTA or building projects
• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Quantity Survey or equivalent

Job Description:

• Plan, manage and maintain the BIM data in compliance with project requirements

• Create and maintain the project template files to assure standards.

• Coordinate with other discipline and engineers to manage and resolve the clashes.

• Prepare Transmittal on drawings for submission or issuance to sub-contractors

• Supersede and updated the current revision status

• Compile of As-built drawing upon project completion

• Minor coordination of Architectural / Structural / M&E drawings

• Detailing and documentation of working drawing

• Any other duties assigned

Job Requirement:

• Minimum 2 years experience in LTA Project and have relatable experiences on Drafter.

• Able to work well in teams and independently

Job Responsibilities:

• Work closely with customers to understand their current cyber operations and establish their cyber threat intelligence requirements
• Design operational use cases to adopt cyber threat intelligence in their operations
• Lead a development team and chart the product development roadmap
• Develop and customize plugins to adapt with COTS CTI Products
• Assist in training the machine learning model for the Artificial Intelligence (AI) Engine
• Work closely with project team to deliver project which includes system integration and deployment of hardware and software
• Acceptance Testing and Documentation

Job Requirements:

• Good understanding in Cyber Threat Intelligence Workflows, STIX and MITRE Framework
• Experience in working with different CTI Platform available in the market
• Knowledge in Linux OS is preferred
• Experience in Virtualization, Containerization and Network.
• Well verse in Python development and CSS styling is a must.
• Experience in ELK Stack, MinIO, GraphQL, RabbitMQ
• Candidate has a passion for cybersecurity domain
• Good troubleshooting and problem solving skill
• Work location: Jurong East

We are seeking a highly skilled and motivated Network Architect to join our esteemed team. As the Network Architect, you will be responsible for overseeing the design, planning, and successful implementation of critical network infrastructure projects. Your technical expertise and leadership will be pivotal in ensuring our network solutions align with business goals and exceed industry standards.

Responsibilities:

• Collaborate with stakeholders, including project managers, network engineers, system architects, and customer business leaders, to design and develop robust network architectures that meet project requirements and business objectives.
• Demonstrate expert knowledge of networking technologies, protocols, and infrastructure components, good knowledge of system and security technologies, protocols, and infrastructure components to make informed decisions regarding equipment selection, network design and integration.
• Evaluate and manage vendor relationships, negotiating scope of work and ensuring compliance with project specifications and quality standards.
• Lead and mentor a team of network engineers, providing technical guidance, assigning tasks, and fostering a collaborative and productive team environment.
• Conduct thorough testing and troubleshooting activities to validate network functionality, performance, and security, resolving teething issues that arise during design and integration phases.
• Custodian of the documentation of network design, planning and configurations to ensure the technical sustainability for the sector assigned.
• Work with network presales consultants to develop detailed and customized technical proposals for tech refresh, add-on, or variation orders, clearly outlining the benefits, features, and value of the proposed network solutions.
• Identify opportunities for continuous improvement and innovation such as automation to enhance network performance, reliability, and security.
• Foster effective communication and collaboration with internal and external stakeholders to ensure project alignment with business goals.

Requirements:

• CCNP certification is required, demonstrating a strong foundation in network design and implementation.
• CISSP and CCIE Enterprise Infrastructure certification are considered significant advantage, showcasing exceptional expertise in complex network environments.
• Proven experience as a Network Architect or in a similar role, leading successful network projects from inception to completion.
• Extensive knowledge of networking technologies, protocols, and infrastructure components.
• Good knowledge of system and security technologies, protocols, and infrastructure components
• Solid experience in vendor management, scope of work negotiation.
• Excellent leadership, communication, and problem-solving skills.
• Strong analytical and troubleshooting abilities, with a keen attention to detail.
• Ability to work independently and collaboratively in a fast-paced environment.

Work location: Jurong East

Responsibilities:

• Project deployment for customers' Enterprise IT Network Services.
• Work closely with Project Manager to fulfil project deliverables.
• Able to perform the role of Project Lead for projects.
• Documentation skills include creating and updating detailed solution design, installation and maintenance documents.
• Develop test cases and conduct proof of concept tests on new software and hardware prior to upgrade/deployment.
• Establish TAC cases with principal vendor in complex problem till resolved.

Requirements:

• Preferably with good knowledge and hands on experience in the following areas:

- Design, planning, integration, implementation and validation.
- System integration and implementation project lifecycle.
- Troubleshooting and problem identification.
- Support of applications and IT infrastructures.
- LAN/WAN/WLAN: Cisco/Alcatel router, Enterprise/DC switches, WLC.
- Network Security Solutions: Fortinet, Checkpoints, Cisco IPS/IDS, Cisco ASA, Cisco Firepower, Cisco ISE, Aruba Clearpass, Cisco ESA, Cisco WSA, Cisco SMA.
- Network Monitoring: SolarWinds, Alcatel Omni-Vista.
- Network Appliances based: Infoblox DNS/DHCP, F5 LTM/GTM, A10 LTM.

• Preferably with Cisco certification, Alcatel certification, F5 LTM & Network Security products.
• Experience with LAN, WAN, WLAN, Data and Security networking in implementation.
• Fast-paced environment
• Proven analytical and problem-solving abilities.
• Highly self-motivated and directed, with keen attention to detail.
• Experience working in a team-oriented, collaborative environment.
• Good communication and writing skills.
• Able to work flexible hours especially during after-office hour scheduled maintenance windows.
• Strong customer service orientation.

Work location: Jurong East.

Responsibilities:

• Must be able to apply effective project management methodologies and ensure appropriate action applies in corrective needs
• Responsible for the development of project plans, activities and schedule
• Strong in tracking project scope, requirements, timelines, milestones and deliverables.
• Responsible for project Profit & Loss
• Must be able to manage cross-functional teams in project deliveries
• Manage contract requirements, terms, change management, identify potential risks and devise contingency plans.
• Provide regular projects communications including status updates to customers, senior management, customers and stakeholders
• Established and maintain comprehensive project documentation
• Design appropriate training programs and workshops for project team
• Experience in managing deployment of IT infrastructure, such as systems & networks and cybersecurity solutions
• Experience in major IT infrastructure & cybersecurity system updates, upgrades, OS hardening and migrations.
• Constantly keep abreast of latest technology changes to maintain deployment and operational efficiency
• Good vendor management skills.
• Participate in tender project management and maintenance costing & quotation
• Competent and proficient understanding in IT Infrastructure Services, Cybersecurity Solutions, Cloud Computing and Systems Integration.

Requirements:

• Highly motivated and self-driven to complete assignment with the limited resources and tight schedule
• Good technical skills in engineering, computer, cybersecurity and IT systems, and preferably in communications technologies as well
• Good knowledge of Systems Engineering, Project Management and Systems Integration
• Good communication and writing skills
• At least 2 years’ experience in project management. Able to handle complex projects, technical challenges and different groups of users and external contractors
• Good to have PMP or CITPM or PRINCE2 certification with strong understanding of techniques and methods
• Strong familiarity with project management software E.g. MS Project
• Strong customer management in collaboration and understanding their requirements
• Strong vendor management in negotiation and collaboration
• Strong in people management
• Work location: Jurong East

Job Descriptions:

· Assist Deputy General Manager to support in managing Admin Team

· General administration support, including but not limited to:

· Company BCA license renewal, new application

· Support audit including GGBS, ISO, BCA 24 RP-P-T personnel

· Respond to internal & external parties, including but not limited to relevant government agencies such as BCA

· Preparing payment voucher for suppliers and processing petty cash claim for staff

· PPE order and record update

· Support tender team for POA application

· Support team leaders on call

· Company internal and external events support like posting Christmas cards, ordering CNY hampers and mooncakes etc

· Reception of guests from local and abroad

· Taking meeting minutes

· Management of company stamp and director’s signature stamp

· liaise with regional and HQ office and submit reports upon request

· General Admin duties, including but not limited to handling incoming calls, email, mails, ordering stationeries and pantry supplies, arranging travel and booking of hotels

· Other duties as assigned by DGM

Job Requirements:

· Diploma / Degree, admin or HR related studies preferred

· At least 5 years of related working experience

· Willing to multi-task and have sense of urgency.

· Able to work well as a team and independently

· Good command of written & spoken English and Chinese Mandarin (in order to liaise with Chinese speaking associates)

· Proficient with Microsoft Office programmes including MS Excel, Power point & MS Words

· Good interpersonal and communications skills

· 5 days work week

· Appointment title will commensurate with experience and qualification

-Monitor, coordinate and keep track of site progress with internals and externals to ensure all work is carried out according to specifications and schedule

-Ensure compliance with WSH Regulations

-Able to read construction drawings, skilled in reinforcement concreting works, tiling, plastering, and other related finishing work on site

-Supervise the related construction activities at the site

Job Requirements:

-Candidates must possess at least a Primary/Secondary/”O” Level, Higher Secondary/College, Professional Certificate/Nitec in any field

-At least 1 years of working experience in a related field