1. Plan, organise and manage WHS activities within the sites to cultivate good EHS practices.
2. Perform Risk Assessment and draft safework procedures with clients for submission before start of project
3. Conduct induction for new workers on in-house safety regulations
4. Conduct Risk Assessment and safework procedures briefing to the workers
5. Site inspection and conduct safety meeting
6. Report and investigate accidents and incidents at sites
7. Participate in internal audits and review of Safety Management System
8. Maintain HSE controls and process within Company’s policies and government’s regulations
9. Accident investigation and submit I-Report when necessary
10. Develop Emergency Response Plan for audits
11.Prepare forms to be implemented in the workplace such as safety checklist, RA forms etc.
12. Candidate must possess at least a post secondary Diploma with at least 6 years relevant construction project safety experience in singapore
13. must possess professional knowledge in Law and regulations (WSH Act and Environment)

Electrical PLC Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Use Siemens S7-400 PLC to do the HVAC System PLC program. Experience in CPU Redundancy, Modbus Communication Redundancy.
8. Use S7-1200 PLC to do the HVAC Control System PLC program
9. Use Siemens HMI software to do the Touch Screen Program.
10. Fully understood HVAC System D & ID, P & ID.
11. Marine and Offshore commissioning experience are required.
12. Sometimes will go to site trouble shooting.
13. Contact with client about the project requirement.
14. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Electrical Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Fully Understand PLC control system.
8. Fully understood HVAC System D & ID, P & ID.
9. Marine and Offshore commissioning experience are required.
10. Sometimes will go to site for trouble shooting.
11. Contact with client about the project requirement.
12. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

WE NEED EXPERICEND FOR METAL WOKS , ALUMINMUM WORKS , WETRADE WORKS AND TILES WORKS FOR CONSTRUCTION (HDB / CONDO ) , NEED HAVE EXCELLENT IN CHINESE AND ENGLISH COMMICATION SKLII AND ACKNOWLEGE DESIGN WORK ,NEED TO GO THROUGH WITH SITE COODINATOR FOR BQ AND MATERAILS ORDER AND DRWAING SUBMISSION WORKS ，ALLOW TO FOLLOW AND COORDINATE WITH SITE WORKS AND PROGRESS WITH MAINCON , SITE MEETING

1. Prepare and Tabulate the project budget for each material.

2. Do quantity take-off

3. Can do market analysis and quote invitation subcons and suppliers

4. Able to do calculation about Earthworks Excavation works

5. Can check actual work done and certify maincon payments

6. Able to prepare Bar Bending Schedule (BBS) , rebar and concrete fluctuation by base index and current index

7. Prepare quotation and progress claims for sub contract works, equipment rental and disposal.

8. Prepare Bill of Quantities and Cost Estimate

9. Must know how to use Autocadd 2D and 3D, Excel and Powerpoint

• Full spectrum of HR functions including Recruitment and Orientation & Training
• Payroll and IR8A submissions
• Work Pass and Man Year Entitlement applications
• Administration of employee profiles and movements such as promotion, secondment, resignation, dormitory
• Administration of incident records, medical insurance and work injury claims
• Submission of monthly HR reports to management
• Implementation of HR-related systems, policies and programmes
• Application of HR-related grants
• Participation in recruitment fairs
• Planning of company events
• Involved in annual ISO and external audit
• Undertake additional tasks and responsibilities when required or as instructed

Pre & post contract Quantity Surveying Works such as:-

1. Taking off quantities.
2. Tendering of projects.
3. Sourcing of sub-contractors, suppliers and materials.
4. Progress payment and claims.
5. Contract administration.
6. Variations
7. Final accounts

Degree or diploma in Building, Quantity surveying or equivalent with at least 3years working experience with main contractor in private residential projects.

• Design and prepare AutoCAD drawings based on AutoCAD standards.
• Review and incorporate design details from Coordinated Combined Services Model.
• (CCSM) into Combined Serviced Design (CSD) drawings.
• Work with design and construction team to prepare drawing and relevant documents for submission.

Minimum Requirements:

• Degree/Diploma in Civil/Mechanical/Electrical Engineering.
• At least 2 year relevant experience.
• Experienced in Microstation software to prepare computer-aided drawings.
• Able to work independently in a fast-paced environment.

• Plan, organize, direct and run optimum day-to-day operations of the facility.
• Be responsible for the overall maintenance and repair works of the plant equipment.
• Submission of documentation following preventive maintenance
• Minimal downtime of company’s/ client machinery and equipment
• Inspection of facility equipment
• At least 1 years or more of relevant experience in crane manufacturing industry or related
• Able to multi task & able to develop improvement plans
• Hardworking, committed & independent
• Team player & self-starting individual

Roles & Responsibilities

Driver - Responsibilities

The work scope for the above job title is as but not limited to the following:

1 The main task of the Driver is to drive the Company lorry to pick up workers, to or from site, office and dormitory etc.

1.1 The Driver must drive the vehicles to the required work sites punctually.

1.2 The Driver must follow the schedule or ad-hoc obtained from the Supervisors and Co-ordinator. The Driver must inform the parties involved if there are any clashes in schedule before proceeding.

1.3 The Driver must inform the Supervisors and Co-ordinator as soon as possible if he is delayed in his schedule. This will enable them to plan their resources efficiently.

1.4 Aside from driving the workers to site, rest of the time will be to support office courier needs.

2 Usage of Company vehicles

2.1 The Driver is to switch off the ignition completely and remove the key when the vehicle is parked and not in use. The Driver must not leave the vehicle in idle mode while waiting.

2.2 The Driver must understand that the Company’s vehicles and attached cash cards are solely to be for Company use. Otherwise, costs will not be reimbursed.

3 Safety

3.1 The Driver must drive and operate the vehicles in a safe manner in accordance to local laws.

3.2 If there are loads on the vehicles, the Driver must ensure the loads are properly secured in accordance with local laws and regulations.

3.3 The Driver must inform the Director or PIC immediately that he is involved in an accident while driving or operating the vehicle. This includes causing damage to third party property.

3.4 The Driver should understand that if the accident is caused by the Driver’s negligence, the Company is entitled to pursue part or all of the claims from him.

3.5 The Driver should also understand if he incurs any traffic offences due to his own negligence, the Company is entitled to pursue part or all of the claims from him.

4 Servicing and Maintenance

4.1 The Driver is to inform the Company if any of the vehicles are unsafe to operate and require repairs. The Driver must not operate the vehicles in such situation.

4.2 The Driver will drive the vehicle to the Company appointed workshop for servicing and maintenance. The Driver will also pick up the vehicle when servicing and maintenance is completed.

4.3 The Driver will drive the vehicles to Inspection Centres as required.

The above is an overview of the work scope and responsibilities of a Driver employed by the Company. It is by no means an exhaustive list. There may be other scope and responsibilities deemed normal by the industry which by default will be included in this Appendix.

Schedule:

Day shift: 5.5 days per week

Requirement:

1. Minimum Class 3 Singapore Driver's license

2. Familiar with the marine industry procedures

3. Good driving track record

4. Familiarity with Singapore roads and ERP time

5. This job may require some late work. OT allowance will be given.

6. Fit and in good health

1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

• Develop a growth strategy focused both on financial gain and customer satisfaction
• Conduct research to identify new markets and customer needs
• Arrange business meetings with prospective clients
• Promote the company’s products/services addressing or predicting clients’ objectives
• Prepare sales contracts ensuring adherence to law-established rules and guidelines
• Keep records of sales, revenue, invoices etc.
• Provide trustworthy feedback and after-sales support
• Build long-term relationships with new and existing customers
• Develop entry level staff into valuable salespeople

ENGINEER/ASST ENGINEER FOR DESIGNER

- O' LEVEL/ITE/DIPLOMA GRADUATE

- HAVE INTEREST IN AUTOMATED SYSTEM DESIGN

- INNOVATIVE MIND SET AND ABILITY TO WORK INDEPENDENTLY

- KNOWLEDGE OF INVENTOR/SOLID WORKS AND 3D SOFTWARE REQUIRED

- AT LEAST 1-2 YEAR WORKING EXPERIENCE WITH AUTOMATION FACTORY

- DESIGN AND DEVELOP MECHANICAL SOLUTIONS FOR FACTORY AUTOMATION

Key Roles and Responsibilities

• Assist the Site Project manager in monitoring and managing the day-to-day operation of the projects.
• To support Site Project Manager in managing day-to-day clients’ interactions and expectations for optimal results
• To support Site Project Manager to collaborate with peers, liaise with trade contractors, clients and consultants and ensure timely delivery of quality services.
• To prepare and submit method of statement, sketches, site record and other technical submissions in a timely manner.
• To prepare Inspection and Test Plan, user manuals, drawings and conduct inspection and check on works performed.
• Check the drawings discrepancies and conduct field verification, and submit technical clarification to the clients and consultants.
• Ensure updated drawings including shop drawings are used by the site team in a timely manner.
• Assist the Project Manager in the preparation of reports and presentation to management, clients and stakeholders.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act
• Perform any other tasks as and when required so as to meet project milestones

Requirements

• Min Diploma or Higher Nitec in Mechatronics/Electrical/Electronic Engineering or relevant with at least 3 years working experience
• Hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must
• Hands-on experience in security system configuration, System Networking and integration with third-party systems will be an advantage
• Willing to take ownership and Pro-active in Problem solving
• Must be a team player and strong verbal and written communication skills
• Customer service and business orientated with good initiative and adaptability
• Required to perform standby duties whenever required
• Driving License – Preferably if candidate possesses its own vehicle
• Singapore Citizens are preferred
• Location is at Shan Road / Site Office
• 5.5 work days

• Prepare, schedule, coordinate and monitor the assigned engineering projects
• Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications
• Interact daily with the clients to interpret their needs and requirements and represent them in the field
• Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status
• Assign responsibilities and mentor project team
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support
• Review engineering deliverables and initiate appropriate corrective actions

Ø Providing technical input during the project bidding phase including: Specification Reviews, Drawing Reviews, Instrumentation Selection and Procurement / Pricing, Prepare bidding and scope documents in relation to Electrical contractor selection Ø Manage EC&I Subcontractors Ø Mark-up and checking of drawings Ø Liaise between in-house mechanical project engineer and subcontractors Ø Witness Electrical and Instrument panel manufacturing, testing, commissioning work and assist in start-up of systems including: Instrumentation Configuration and Set Up, Troubleshooting of Electrical, Mechanical and Software Issues Ø Preparation of punch list to ensure that the contractor rectifies all items before client final commissioning and client acceptance.

The Climate Transformation Programme (CTP) aims to develop, inspire and accelerate knowledge-based solutions and educate future leaders to establish the stable climate and environment necessary for resilient, just, and sustainable Southeast Asian societies.

CTP will generate knowledge and innovation across disciplines including climate and Earth science, ecology, materials science, artificial intelligence, humanities, social sciences and the arts, finance, health, and engineering. It will also translate state-of-the-art scientific results into real world solutions for Singapore, and it will transfer these solutions to Southeast Asia (SEA) and beyond.

As part of this programme, Research Cluster 4: Novel engineering solutions for climate impacts, will explore engineering solutions to adapt to sea-level rise and climate-constrained water resources. The CTP research programme is summarised here: https://earthobservatory.sg/research/climate/climate-transformation-programme>.

The Project Officer will be based in School of Civil and Environmental Engineering (CEE) and will be expected to work effectively for advancing the engineering solutions to mitigate the climate change impact which focus on new design concepts for seawalls and coastal defence systems. The position is expected to perform independent and collaborative research to meet the project objectives, to assist the management work of the project daily operation to facilitate the success of the project.

Key Responsibilities:

• Conduct research on laboratory experiments to test the performance of flexible seawall in flume test.
• Keep track of the latest related research developments
• Writing project progress reports
• Assist in the daily project operation management

Job Requirements:

• Bachelor in civil engineering, Coastal Engineering or related discipline
• Expertise in laboratory soil mechanics testing
• Knowledge in ground improvement, coastal erosion and management, hydrodynamics
• Publication track record is an advantage
• Proficiency in oral and written English - essential for data analysis and communication with stakeholders

Interested applicants are invited to submit a cover letter and full CV in one document. Enquiries about this position can be made to Dr. Wu Shifan ([email protected]).

We regret that only shortlisted candidates will be notified.

• Develop and implement operational policies and procedures for efficient operations.
• Enhance systems, processes, and best practices.
• Manage day-to-day operations, overseeing the operations team and department.
• Ensure organizational processes comply with legal regulations and standards.
• Uphold health and safety guidelines and enforce compliance.
• Monitor employee and team performance, offering coaching, training, and feedback for improvement.
• Handle budgets, forecasting, and resource allocation to meet strategic goals.
• Collaborate cross-departmentally to align operations with organizational objectives.
• Cultivate and maintain relationships with vendors and suppliers.
• Negotiate contracts for favorable pricing with suppliers and vendors.
• Optimize business travel processes, secure corporate rates, automate expense reports, and ensure compliance.
• Implement quality assurance measures for products/services and monitor production KPIs.
• Enhance customer service quality and satisfaction.
• Analyze data to identify process improvement opportunities and cost savings.
• Manage supply chain processes, including inventory, production, sales, and sourcing.
• Optimize workflows and processes for efficiency and cost-effectiveness.

JOB DESCRIPTION

1. Responsible for overall project progress and ensure project is complete within the specific time, within budget and meet client’s requirement;
2. Liaise with design team on engineering and design issues;
3. Responsible for planning and deployment of resources such as manpower, machinery, equipment and material;
4. Resolve any disputes/clarifications during the execution of project;
5. Ensures settlement of project final accounts at the end of the contract;
6. Prepares and attends project budget presentation and review;
7. Prepares audit reports;
8. Chairs Safety and Health coordination meetings.

REQUIREMENT

1. Diploma in Mechanical Engineering or Equivalent Certificate;

2. At least 3 years of relevant experience in the Marine Industry;

3. Good office coordination skill and interpersonal skill;

4. Independent and resourceful;

5. Good communication skill;

6. Able to handle pressure;

7. Preferably able to understand and read Mandarin.

JOB DESCRIPTION

- To support Operation Manager to initiate, plan, execute, monitor and control for the entire company’s ongoing projects.

- Coordination between departments from QA/QC, Finance, Engineering, Projects, production, logistic, commercial in local and oversea for smooth operation

- Identifying inefficiencies and areas of improvement

- Resource management

- Any additional tasks out of the above assign by the management

QUALIFICATION:

- Degree/diploma in mechanical/electrical

- Previous HVAC/ACMV experience in Marine/ industry/ land preferred

- Fresh graduate with good working attitude and willing to learn sprit are welcome to apply

Excavator operators or heavy equipment operators should expect to perform many different duties, which can include:

• Operate heavy equipment to move, load, and grade earth, rock, gravel or other materials during construction.
• Operate heavy equipment to assist in the maintenance and repair of roadways.
• Excavate rock, ore or other materials from open-pit mines, strip mines, quarries or construction pits.
• Read and interpret blueprints or designs to understand the requirements of the job.
• Conduct pre-operational checks on equipment and clean, lubricate and refuel equipment.

Job Description

Candidate will be tasked to do the programming for various CNC machines. Company's main machines are laser, turret, pressbrake, bandsaw and plasma cutting.

• Able to interprete sheet metal drawings like panels, claddings etc.
• Have experience in either 1 of the 4 CNC machines - laser, turret, pressbrake or plasma cut.
• Willing to undertake training to do programming for all CNC machines.

Job Description & Requirements

• Lead and oversees project execution, monitor site progress, and ensure on-time completion of the project
• Project planning and project management
• Liaise closely with subcontractors, architects, consultants and authorities; set guidelines and provide expertise and supervision to the team.
• Project management, coordination, implementation, execution, control and completion of specific projects.
• Oversee the planning, analysis, recommendations in support of project construction planning, implementation and monitoring work schedules in accordance to the master and detailed work programme.
• Liaise with consultants for technical issues and coordinate with subcontractors on the site activities .
• Assist in developing and implementing corporate construction policies that support project construction.
• Managing interfaces with other contractors working on the project.
• Provide guidance to engineers in relation to construction works, ensure progress according to schedule, quality standards are maintained site inspections are carried out and technical issues are resolved on time
• Manage contractors with a focus on quality, compliance with engineering drawings; applicable code and standards, and construction schedule and cost.
• Prepare report and method statement.
• Monitor ongoing site activities.

Job Requirements:

• Exposure into Interior and Building Construction Project is an advantage
• Be dynamic, self-motivated, proactive, and results-oriented with a proven track record in the construction industry.
• Extensive experience in construction industry and project management.

Need to have engineering knowledge, comprehension of technical documents. Excellent written and spoken communication skills • Possess troubleshooting skills in engineering works • Proven leadership skills with a large and diverse workforce o Be able to work in a fast-moving environment, under pressure and long working hours, when needed.

We are looking for an energetic, trustworthy, and self-starter candidate who could be handy in paperwork preparation and supervision at the worksite, overseeing projects, maintaining safety protocols, and implementing site procedures. Our ideal candidate is experienced, responsible, and team-focused.

Responsibilities:

• Drive e-commerce growth by developing onsite sales and engagement campaigns
• Provide analysis & performance reports including daily, weekly, and monthly, reporting of KPIs and recommending changes to improve performance as to achieve results.
• Drive digital planning, adaptive marketing and agile practices that best engages the consumers.
• Manage and constantly improve on the development and implementation of all e-commerce sites managed by the Company, including own e-commerce, marketplaces (Lazada, Amazon) and 3rd-party retailer sites.
• Create and execute digital marketing campaigns to increase site sales performance
• Optimized UX/UI to improve user experience and increase sales conversion.
• Explore new e-commerce features to capture the latest and newest trend of consumer behavior.
• Work with external and internal stakeholders to develop and execute optimization for product and brand content.
• Define and develop KPI framework to measure and track KPIs and ensure growth effectiveness.
• Evaluate e-commerce campaign and spend effectiveness to ensure positive ROI and recommend data driven learnings for future campaigns
• Manage the e-commerce team and being responsible for the day-to-day operations aspects of the e-commerce platform including but not limited to user experience, order fulfilment, customer service and content creation.
• Review the e-commerce team resources for skills training, career advancement and recruitment.
• Manage off-shore Customer Care / e-commerce support officer who oversee responding to customer inquiries on live-chat and emails.

Requirements:

• Possess degree in Business Administration or equivalent.
• At least 5 years of proven experience in related field, of which 2 years is of managerial capacity.
• Prior experience in digital marketing strategy.
• Proficient in SEO, Woocommerce, Shopify, Wordpress.
• Solid knowledge of web analytics tools like Google Analytics.
• Ability to handle a small team.
• Self-driven and motivated.

Green Star Engineering Pte Ltd looking for an Energetic Managing Director for the Organisation's upcoming projects.

• Develop and execute the company’s business strategies in order to attain the goals of the board and shareholders
• Provide strategic advice to the board and Chairperson so that they will have accurate view of the market and the company’s future
• Prepare and implement comprehensive business plans to facilitate achievement by planning cost-effective operations and market development activities
• Ensure company policies and legal guidelines are communicated all the way from the top down in the company and that they are followed at all times
• Communicate and maintain trust relationships with shareholders, business partners and authorities
• Oversee the company’s financial performance, investments and other business ventures
• Delegate responsibilities and supervise the work of executives providing guidance and motivation to drive maximum performance
• Read all submitted reports by lower rank managers to reward performance, prevent issues and resolve problems
• Act as the public speaker and public relations representative of the company in ways that strengthen its profile
• Analyze problematic situations and occurrences and provide solutions to ensure company survival and growth

Requirements and skills

• Proven experience as Managing Director or other managerial position
• Demonstrable experience in developing strategic and business plans
• Thorough knowledge of market changes and forces that influence the company
• Strong understanding of corporate finance and measures of performance
• Familiarity with corporate law and management best practices
• Excellent organisational and leadership skills
• Excellent communication, interpersonal and presentation skills
• Outstanding analytical and problem-solving abilities
• Diploma holders are also welcome