Job Descriptions

• Strong swimming and diving skills, with the ability to work comfortably and safely in underwater environments.
• Proficiency in using diving equipment, such as masks, fins, regulators, and buoyancy control devices.
• Knowledge of underwater construction techniques, including welding, cutting, and concrete placement.
• Familiarity with underwater inspection and surveying methods, including the use of cameras, sonar systems, and measurement tools.
• Ability to work effectively in a team and follow instructions from supervisors.
• Excellent problem-solving skills, with the ability to troubleshoot issues that may arise during underwater operations.
• Physical stamina and endurance to perform tasks in demanding underwater conditions.
• Strong attention to detail to accurately document findings and report on underwater inspections.
• Good communication skills to effectively communicate with team members and supervisors.
• Knowledge of safety protocols and regulations related to commercial diving.

Job Requirements

• Valid certification as a Commercial Diver from a recognized training institution.
• Minimum of 2 years of experience in commercial diving operations.
• Proficiency in first aid and CPR.
• Ability to pass a physical fitness test and maintain good overall physical health.
• Familiarity with relevant diving regulations and industry standards.
• Knowledge of underwater construction and maintenance techniques.
• Advanced certifications in specialized diving techniques (e.g., underwater welding, inspection) are a plus.
• Experience operating underwater equipment, such as remotely operated vehicles (ROVs) or underwater cameras, is preferred.
• Valid driver's license with a clean driving record.
• Strong references from previous employers or diving instructors.

Job Descriptions

• Strong swimming and diving skills, with the ability to work comfortably and safely in underwater environments.
• Proficiency in using diving equipment, such as masks, fins, regulators, and buoyancy control devices.
• Knowledge of underwater construction techniques, including welding, cutting, and concrete placement.
• Familiarity with underwater inspection and surveying methods, including the use of cameras, sonar systems, and measurement tools.
• Ability to work effectively in a team and follow instructions from supervisors.
• Excellent problem-solving skills, with the ability to troubleshoot issues that may arise during underwater operations.
• Physical stamina and endurance to perform tasks in demanding underwater conditions.
• Strong attention to detail to accurately document findings and report on underwater inspections.
• Good communication skills to effectively communicate with team members and supervisors.
• Knowledge of safety protocols and regulations related to commercial diving.

Job Requirements

• Valid certification as a Commercial Diver from a recognized training institution.
• Minimum of 2 years of experience in commercial diving operations.
• Proficiency in first aid and CPR.
• Ability to pass a physical fitness test and maintain good overall physical health.
• Familiarity with relevant diving regulations and industry standards.
• Knowledge of underwater construction and maintenance techniques.
• Advanced certifications in specialized diving techniques (e.g., underwater welding, inspection) are a plus.
• Experience operating underwater equipment, such as remotely operated vehicles (ROVs) or underwater cameras, is preferred.
• Valid driver's license with a clean driving record.
• Strong references from previous employers or diving instructors.

Job Descriptions

• Strong swimming and diving skills, with the ability to work comfortably and safely in underwater environments.
• Proficiency in using diving equipment, such as masks, fins, regulators, and buoyancy control devices.
• Knowledge of underwater construction techniques, including welding, cutting, and concrete placement.
• Familiarity with underwater inspection and surveying methods, including the use of cameras, sonar systems, and measurement tools.
• Ability to work effectively in a team and follow instructions from supervisors.
• Excellent problem-solving skills, with the ability to troubleshoot issues that may arise during underwater operations.
• Physical stamina and endurance to perform tasks in demanding underwater conditions.
• Strong attention to detail to accurately document findings and report on underwater inspections.
• Good communication skills to effectively communicate with team members and supervisors.
• Knowledge of safety protocols and regulations related to commercial diving.

Job Requirements

• Valid certification as a Commercial Diver from a recognized training institution.
• Minimum of 2 years of experience in commercial diving operations.
• Proficiency in first aid and CPR.
• Ability to pass a physical fitness test and maintain good overall physical health.
• Familiarity with relevant diving regulations and industry standards.
• Knowledge of underwater construction and maintenance techniques.
• Advanced certifications in specialized diving techniques (e.g., underwater welding, inspection) are a plus.
• Experience operating underwater equipment, such as remotely operated vehicles (ROVs) or underwater cameras, is preferred.
• Valid driver's license with a clean driving record.
• Strong references from previous employers or diving instructors.

Job Description:

• Manage customer orders from processing to fulfilment, ensuring timely and accurate delivery.
• Proactively address back orders and resolve customer issues to ensuring high levels of satisfaction.
• Generate purchase orders after obtaining necessary clarifications and confirming prices.
• Coordinate with suppliers on goods readiness and ensure smooth communication
• Collaborate with freight forwarders to arrange shipments
• Manage stock record to ensure availability and accuracy.
• Liaise with customers on delivery arrangements.
• Generate delivery orders and invoices.
• Handle ISO certification renewal processes to ensure compliance with standards.
• Handle office administration tasks and undertake any other related duties as assigned.

Job Requirements:

· Diploma in Supply Chain, Engineering or a related field.

· 2 to 3 years’ working experience in Operations.

· Familiarity with the Globe 3 ERP System is an advantage.

· Ability to work independently with a committed and proactive approach.

· A positive attitude, willingness to learn, and flexibility in handling tasks.

· Good personality, willing to learn and flexible on the task.

· Immediate availability is preferred.

Job Description & Requirements • Assist the Project Manager and Site Manager in overseeing the day-to-day operations on site. • Assist in the planning and deployment of manpower and resources to meet operational needs. • Ensure works are carried out in accordance to the project schedule, quality requirements and safety policy. • Supervise performance of site crews and subcontractor. • Monitor work progress, identify and resolve ground issues when required • Ensure availability of materials and equipment on-site to meet operational needs. • Work with inspectors and QA crew to ensure quality workmanship. • Liaise with subcontractors for cladding replacement works. • Requirements: • Minimum diploma in Engineering • 3- 5 years’ of relevant work experience in Construction industry, ideally for main-contractor. • Understanding of project flow for Construction / Civil Engineering work. • Possess good communication skill and leadership quality to supervise workers and...

Job Description

- Managing a part of the construction

project

- Assist in technical advice and supervision

for other members of the staff

- Planning day to day work program of the

project progress

- Ensure projects meets agreed

specifications, budgets as well as

timescales

- Authorizing technical drawings and

engineering plans

- Ad-hoc assignments

Job Requirements

- Diploma in civil engineering or equivalent

- Minimum 1 year experience in landed

property from start to finish

- Good communications skills

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe,

the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology

and innovation to solve real-world problems and improve lives. Our dedication to excellence and our

strong track record have earned us a distinctive reputation for quality and trust as a global technology,

defence and engineering group, spanning across the aerospace, smart city, defence and public security

segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the

Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic

suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries,

critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep

domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity

engineering, digital authentication, SCADA protection, audit and compliance.

Tasks description

• Job Opening, Job Amendment, Sales Confirmation, Cost Transfer, Job Closing, Billing

• Treasury / Hedging

• Inventory

• Month end closing/ Reporting on CACL (Current Assets/ Current Liabilities)

• Projects incl ERP Harmonization/ Continuous Improvement/ Automation

• Ad hoc projects as assigned

Tasks Delivery

• Deliver task on time with quality as requested

• Willing to work OT (if required to deliver the work)

• Able to demonstrate thorough analytical skills process

• Able to think and work independently with minimum but clear guidance

Technical Skills Requirements:

• Hands on and familiar with Project Management / WBS in SAP

• Handling/Analyze Thousands of WBS data regularly

• Contract Assets/ Contract Liabilities

• Return on Capital Employed (RoCE) concept

• Orderbook concept

Other Requirements:

• At least more than 5 years of Financial Accounting and Business Controlling experience;

• Proficient with MS Excel, MS Powerpoint, SAP

• Knowledge on Project Costing/ WBS settlement will be preferred

• Strong business acumen, analytical skills and sound knowledge of accounting, taxation standards and relevant statutory requirements

• Able to work independently under high pressure with very limited resources

• Strong communication and presentation skills

• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Responsibilities:

• To manage and monitor of daily project works, instructions and progress.
• Ensure a safe work environment on site
• Supervise all works, including Civil and architectural works, road works and utility diversion
• Track the progress and quality of work being performed by operations.
• Work closely with consultant, and sub-contractor.
• Supervision of construction works and handle coordination works at sites and ensured targeted completion dates are met
• Attend regular meetings with owner/client/contractors on the project related matters
• Ensure that the works are carried out in accordance with the Project Quality & Safety Plan, contract requirements, including drawings and specifications
• Create and maintain detailed project documentation
• Monitoring resources on site and ensuring that sufficiency, availability, and performance are aligned with the schedule.
• Ensuring that the works are carried out to schedule and in accordance to government regulations

Job Overview

The Senior Contracts Officer will manage, negotiate, and administer contracts to ensure compliance with company policies, client requirements, and industry standards within the FPSO sector. This role is critical for supporting project execution, mitigating risks, and ensuring that all contractual obligations are met efficiently.

Key Responsibilities

• Contract Drafting and Administration:Prepare, review, and revise contracts, ensuring alignment with company standards and legal requirements.
  Maintain a comprehensive database of contracts and monitor their lifecycle.
  
• Negotiation:Support the negotiation of contract terms with clients, vendors, and subcontractors to achieve favorable terms.
  Resolve contractual disputes promptly and amicably.
  
• Compliance and Risk Management:Ensure adherence to legal, regulatory, and contractual obligations specific to FPSO operations.
  Identify and mitigate risks in contracts to safeguard company interests.
  
• Coordination and Communication:Collaborate with internal teams, including legal, procurement, and project management, to align on contractual terms.
  Serve as a liaison between the company and external stakeholders regarding contractual matters.
  
• Reporting and Documentation:Prepare detailed reports on contract performance, risks, and compliance.
  Maintain accurate records of contractual documents for audits and future reference.
  

Qualifications and Experience

• Education:Bachelor’s degree in Law, Business Administration, or a related field.
  
• Experience:Minimum of 10 years of experience in contract management, preferably in the oil and gas or FPSO industry.
  Strong understanding of commercial terms, legal frameworks, and industry-specific requirements.
  
• Skills:Proficiency in contract management software and tools.
  Excellent negotiation, analytical, and communication skills.
  Detail-oriented with a strong ability to handle multiple tasks under tight deadlines.
  

Preferred Qualifications

• Knowledge of FPSO design, construction, and operational contracts.
• Familiarity with international maritime and oil and gas regulations.
• Certification in contract management (e.g., IACCM, NCMA) is an advantage.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Summary:

We are seeking a dedicated and skilled Workshop Executive to manage the fleets of vehicles maintenance project. The successful candidate will be responsible for overseeing the maintenance, repair, and efficient operation of our vehicle fleet, ensuring all project milestones and deadlines are met.

Key Responsibilities:

• Manage the day-to-day operations of the Automotive workshop, including scheduling and supervising maintenance and repair activities.
• Ensure all vehicles are maintained in optimal condition and comply with safety standards.
• Coordinate with suppliers and vendors for parts and services.
• Monitor and manage the fleet budget, ensuring cost-effective operations.
• Maintain accurate records of all maintenance and repair activities.
• Develop and implement preventive maintenance programs.
• Train and supervise workshop staff, ensuring high performance and adherence to safety protocols.
• Collaborate with other departments to ensure the smooth execution of the project.

Requirements:

• Diploma in Mechanical Engineering, Automotive Technology, or a related field.
• Proven experience in fleet management, vehicle maintenance, and workshop operations.
• Strong knowledge of automotive systems and repair techniques.
• Excellent organizational and project management skills.
• Ability to lead and motivate a team.
• Strong communication and interpersonal skills.
• Proficiency in using fleet management software and tools.
• Ability to work under pressure and meet tight deadlines.
• Valid driver’s license

Responsibilities:

• Liaise with sub-contractors, suppliers & other parties involved in the project.
• Liaise with construction/design team to prepare document for Request for Quotation (RFQ) or Open Tender.
• Assist Project Contract Manager with quantity surveying matters relevant to Sub-Contract, Works Order and Purchase Order.
• Project administration and documentation include preparation of interim valuations, pricing and agreement of contract variations, update claim submissions, preparation of final accounts.
• Sourcing for supplier and sub-contractor, collate price comparison and costing summary.
• Evaluation and certification of sub-contractors’ progress payments.
• Good knowledge of reading specifications and building drawings.
• Prepare project budgeting and costing reports.

Requirements:

• At least 2 years’ working experience in Quantity Surveying in main contractor
• Experience with LTA or building projects
• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Quantity Survey or equivalent

Job Description:

• Plan, manage and maintain the BIM data in compliance with project requirements

• Create and maintain the project template files to assure standards.

• Coordinate with other discipline and engineers to manage and resolve the clashes.

• Prepare Transmittal on drawings for submission or issuance to sub-contractors

• Supersede and updated the current revision status

• Compile of As-built drawing upon project completion

• Minor coordination of Architectural / Structural / M&E drawings

• Detailing and documentation of working drawing

• Any other duties assigned

Job Requirement:

• Minimum 2 years experience in LTA Project and have relatable experiences on Drafter.

• Able to work well in teams and independently

Job Descriptions:

· Assist Deputy General Manager to support in managing Admin Team

· General administration support, including but not limited to:

· Company BCA license renewal, new application

· Support audit including GGBS, ISO, BCA 24 RP-P-T personnel

· Respond to internal & external parties, including but not limited to relevant government agencies such as BCA

· Preparing payment voucher for suppliers and processing petty cash claim for staff

· PPE order and record update

· Support tender team for POA application

· Support team leaders on call

· Company internal and external events support like posting Christmas cards, ordering CNY hampers and mooncakes etc

· Reception of guests from local and abroad

· Taking meeting minutes

· Management of company stamp and director’s signature stamp

· liaise with regional and HQ office and submit reports upon request

· General Admin duties, including but not limited to handling incoming calls, email, mails, ordering stationeries and pantry supplies, arranging travel and booking of hotels

· Other duties as assigned by DGM

Job Requirements:

· Diploma / Degree, admin or HR related studies preferred

· At least 5 years of related working experience

· Willing to multi-task and have sense of urgency.

· Able to work well as a team and independently

· Good command of written & spoken English and Chinese Mandarin (in order to liaise with Chinese speaking associates)

· Proficient with Microsoft Office programmes including MS Excel, Power point & MS Words

· Good interpersonal and communications skills

· 5 days work week

· Appointment title will commensurate with experience and qualification

-Monitor, coordinate and keep track of site progress with internals and externals to ensure all work is carried out according to specifications and schedule

-Ensure compliance with WSH Regulations

-Able to read construction drawings, skilled in reinforcement concreting works, tiling, plastering, and other related finishing work on site

-Supervise the related construction activities at the site

Job Requirements:

-Candidates must possess at least a Primary/Secondary/”O” Level, Higher Secondary/College, Professional Certificate/Nitec in any field

-At least 1 years of working experience in a related field

• Making plans using detailed drawings
• Creating accurate project specifications
• Designing engineering experiments
• Creating technical reports for customers
• Completing regulatory documents concerning safety issues
• Clear awareness of construction management tools and method of execu
• Liaise with Project Manager
• Able to work OT and perform ad hoc duties

· Report to Project Director / Project Manager.

· Attend site visit and prepare cost estimation.

· Co-ordinating and follow up all the individual respective project team like Civil, E&I, Scaffolding, Automation, Passivation, Safety, Lifting and others.

· As a Controls Engineer you should perform a vital role in designing and developing systems for manufacturing operations.

· Draft tender documents and cost estimation spreadsheet.

· Design layouts, materials and information flow, or machine placement.

· You should responsible to evaluating performance and proposing and implementing improvements new or existing systems.

· Present final figures and unit rates to management.

· Submit tender documents and attend clarification meeting (if requested by client).

· Attend project/ safety meeting with client/sub-contractor/internal and prepare minutes of meeting.

· Prepare overall construction detail schedule for the project.

· Plan, coordinate and execute the job to meet the schedule and quality requirements.

· Prepare / review of project specification, P&ID and material take-off.

· Handling all technical queries and investigating all work-related problems and coordinating with client/sub-contractor/supplier to clarify the problems.

· Ensure the Safety, Productivity and Quality of the project.

· Prepare Method of Statement (MOS), Inspection Test Plan (ITP), Project Schedule and other working procedures.

· Ensure the installation / erection works meets the specification and requirements.

· Liaise with QA/QC personnel and ensure all the works comply with the requirements.

· To carry out inspecting and rectifying any unsafe practices and unsafe place of work.

· You will oversee the safety and job/ project operation.

· Prepare weekly / monthly progress reports/ safety reports/ manpower reports etc.

· You are to direct, guide and manage all tasks under your charge and ensure it is carried out in the most creative, efficient and professional manner to the best of your ability.

· You shall ensure, uphold and comply with all office standards, local by-laws and regulatory requirements.

• General administrative task & support
• Handling accounts receivable & accounts payable
• Handling general Accounting Tasks
• Administering payroll & maintaining employee records
• Handle MOM matters including work pass application / renewal / cancellation
• Workers dormitory arrangement.
• Coordinate with training & Development.
• Administer leave / MC records.
• Monthly CPF submission.
• Prepare employment letter, confirmation letter, warning letter, etc.
• Support admin function for purchasing, report typing and invoicing.
• Licence renewal & preparation of documents for submission.
• Prossess good organization, communication and people's skills
• Any ad-hoc HR & admin duties assigned.

Job Descriptions:

Assist in foreigh workers management pertaining to:

• MOM work passes application, renewal and cancellation
• Month end payroll process
• Prepare HR letters, eg. employment contracts, increment, warning, etc.
• Course registration, renewal and arrangement
• Dormitory matter (check in/out)
• Maintain employee records
• Daily attendance report
• Other ad-hoc duties when assigned
• General admin duties, eg. handling email, phone call and incoming mail.

Requirement:

• At least 1 years experience
• Good communication & interpersonal skills

RESPONSIBILITIES

• Coordinate staff training with HR such as Coretrade, Construction Safety Orientation Course (CSOC), BCA bracket license, etc.
• Distribute letters and documents from HR/Finance department to the workers.
• Help workers to check on their HRIS account with HR. (e.g. payslip, password access, etc).
• Compile Risk Assessment (RA) documents in softcopy and hardcopy.
• Call customers to change aircon installation timings when needed.
• Prepare service reports through email when required.
• New workers registration - thumbprint, dormitory, safety shoes.
• Follow-up with HR and Finance on worker's OT claim, parking claim, medical claim, etc.
• Prepare incident report on vehicle accident and work injuries when needed.
• Compile Warranty Service Repair Installation (WSRI) and update in CRM system.
• Tracking of procurement of equipment, materials and tools.
• Handle project administrative works including progress claims, payments, purchase orders, delivery orders, tax invoices, etc.
• Tracking of manpower deployment onsite and between projects.
• Handle all other administrative works which may be assigned by project manager and engineers.
• Any other ad-hoc duties as assigned by the superior.

REQUIREMENTS

• Secondary or equivalent certificate.
• 2 years’ working experience, preferably in construction related.
• Knowledge in Microsoft Office.
• Good communication and interpersonal skills.
• Possess strong organizational skills and problem-solving skills

Location

• Sungei Kadut

Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

Responsibilities:

• Taking off quantities and costing for pre-tender estimate, variation order, claim, re-measurement and final account
• Prepare price comparison and project costing sheet
• Study drawings, specifications to understand project requirements for design change, claim and variation order
• Prepare, collate and liaise with client and internal project team on monthly progress payment claim and substantiation
• Prepare document for sourcing of quotations and calling of sub-contract tender including tender evaluation, recommending award and preparing sub-contract document
• Certify sub-contractors’ monthly progress claim and evaluate variation works
• Operate cost control system for budget monitoring and tracking
• Exercise good budget control and monitoring
• Knowledge in cashflow projection is a plus
• Any other duties as assigned by reporting officer

Requirements:

• Degree in Quantity Surveying or relevant construction field
• Minimum 2 years of working experience.
• Hardworking, motivated and committed to any given task and company mission
• Able to work under stress and within timeline to deliver result
• Positive work attitude; seek continuous improvement
• A good team player with good communication and interpersonal skill
• Able to multi-task and render good support to reporting officer and project team
• Previous working experience with both main contractor in building jobs will be advantageous
• Good experience in measurement and costing is a must

We are locally own company since Year 2003. We are located at Tuas View Place. Currently, we are operating 2 shifts with 5.5 working days per week with OT. We mainly using Makino Wire Cut Machines and Mazak CNC Lathe.

We have vacancy for EDM Wirecut programmer cum machinist. Prefer with cadcam knowledge and experience.

We specialist in manufacturing of aerospace parts , oil & gas , stamping, semiconductor parts.

- Must have knowledge of using measuring equipment, Vernier Caliper, Micrometer, Height Gauge

- Must be able to understand Technical Drawing

- Must be able to liaise with Customers

- Must quality check all finished parts before sending to customers

- Generate QC Reports to customers

- Must be able to use Microsoft Excel / Words / Email Anyone with the equivalent knowledge will be consider Salary will commence base on experience.

• Posting of recruitment advertisements
• Engagement with both internal and external stakeholders such as employees and vendors, etc
• Manage office sundry purchases
• Payroll administration
• Assists in employment contract renewals
• Coordinate medical arrangement for foreign employees (medical check-ups for work pass, and vaccination)
• Ensure complete, up-to-date, accurate and accessible records are kept for all employees.
• Assists in the co-ordination of social and recreational activities to promote the general welfare of all employees
• Performs HR data entry relating to employee's information, training records, etc.
• Manage and route phone calls appropriately
• Assists in work pass applications and other immigration related work.
• Prepare and submit government bodies and statutory board related surveys.

Production Supervisor will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.
2. Good communication skills with Ship Owners and Superindents.
3. Good time Management and work Independently.
4. To perform any other duties & Responsibilities assigned by superiors from time to time.
5. Ability to demonstrate and implement cost -saving measures.
6. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.