1.Provide First Call Resolution (FCR) technical support via phone and email. Ensure calls are answered and emails are responded in a timely manner.

2.Perform first level troubleshooting on all reported incidents and escalate incidents to 2nd level resolver groups as per work instructions.

3.Furnish and submit timely updates to customers on the status of outstanding issues within targeted Service Level

4.Maintain ownership of cases and follow-up on reported issues until closure and gather accurate and complete relevant information is recorded.

5.Manage customer expectations and notify Team Lead in the event of unusual surge in calls of a specific nature.

6.Handle initial classification/ prioritization of the incidents. Track the progress of resolution and provide regular updates for follow-up actions and incident status.

Geotechnical Engineer

Working Days: 5 Days (Monday – Friday)
Working Hours: 8.30am – 6pm
Location: Near Ubi Mrt
Salary: $3500 - $4200 (Based on experiences)

Job Scope:

• Plan, design, review and prepare drawings & specification & tender document
• Manage technical & engineering matter
• Resolve any technical difficulties & other problems that may rise
• Attending project technical
• Conversant with local codes and regulations Experience in engineering software Geotechnical Engineer
• Geotechnical design, analysis and assessment for ground improvement works, foundation, excavation, earth retaining structures, slope, instrumentation, and site investigation.
• Plan, design, supervise and coordinate for geotechnical/ civil engineering and infrastructural design and site works.
• Ensure all engineering works comply with all relevant statutory standards, regulations, and Codes of Practice.
• Liaison with project stakeholders, clients, other consultants, contractors, relevant authorities.
• Assist Team Leader in maintaining high quality standards of design and supervision

Requirements:

• Bachelor’s Degree in Civil Engineering
• At least 2 – 3 years’ experience with geotechnical

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

RESPONSIBILITIES

• Responsible for assembly, debug and test run of customized modular machines and it’s commissioning.
• Provide on-site technical support at customer premise for equipment operation.
• Perform design modifications through: Simplified design, reduced parts, using cheaper alternatives, while maintaining or enhancing the performance of products in terms of cost reduction.
• Procure and/or assist in the procurement of necessary items to enable the performance of above duties.
• Writing and maintenance of all necessary documentations, work and assembly instructions, manufacturing and test procedures.

REQUIREMENTS

• Min Nitec / Higher Nitec / Diploma in Mechanical Engineering with 2 to 3 years of relevant experience
• Knowledge of industrial automation, jigs and fixture design, FMEA, SPC, CAD as well as experience in machine design are added advantages
• Self-Disciplined with strong project management skills
• Can work independently
• Good interpersonal and communication skills
• Required to travel when necessary

Tempserv Pte Ltd
License No: 06C3745
Ivy Ng Siew Hoon/EA Reg. No: R1102590

Roles & Responsibilities:

• Report to project manager.
• Establish the Project Quality System.
• Report on operational procedures relate to quality and provide improvements to the project quality system.
• Liaise with consultant team on quality control issues.
• Review and prepare reports on Authority inspections (RI inspection, BCA TOP inspection etc).
• Responsible for the compliance of safety & occupational health practices to be implemented at QA/QC Section.
• Responsible for site implementation of safety standards to comply with IMS safe work methods.
• Application to CONQUAS Assessment.
• Ensure the quality of all works to reach the desired CONQUAS and QM scores.

Requirements:

• Recognized degree or equivalent
• Conquas Certified
• 3 years of quality control/ assurance experience in construction industry

We are looking for someone to join us as a Lead Software Engineer, who is proficient in several programming languages and responsible for the development and integration of diverse systems to co-build solutions together with our customer. These solutions will contribute to our state-of-the-art Air Simulator project’s delivery to our end users.

What this role entails:

• Working closely with other internal and external teams to incorporate their sub-systems (e.g. instructor software, bots, 3D modelling) into a coherent integrated simulator
• Implementing messaging mechanisms to allow disparate, and possibly legacy, systems to communicate with each other
• Adopting the various software development tools and software frameworks that the company project team uses
• Generating engineering documentation within the team, to document the various requirements, design, and test areas to be developed

What this role will require:

• A minimum of 5 years experience in software development is required for this role.
• Experience in leading/managing a team will be a plus.
• While company-sponsored training courses and guidance may be provided, independent learning and being a team player is required, to fit into the team’s culture
• Being comfortable to engage and communicate with end users, customers will be a plus
• Good knowledge or practical experience in several programming languages (C++, C#, Java, JavaScript) will be a plus
• Knowledge of distributed simulation technologies such as HLA and DIS will be a plus

The Instructor Operator Station (IOS) is the main interface in which Flight Instructors and Operators will use, to perform planning, controlling of the training environment, observation, and instruction delivery to pilot trainees within a simulator system. We are looking for someone to join us as a Software Engineer, to co-build solutions together with our IOS team members. These solutions will contribute to our state-of-the-art Air Simulator project’s delivery to our end users.

Job Responsibilities:

• Design, and development of Graphical User Interfaces for Flight Instructor and Operator use.
• Working closely to solicit inputs from Flight Instructors and Operators, to provide solutions suitable for their training delivery and execution needs.
• Working closely with other simulator subsystem teams, to ensure proper integration with the various simulator subsystem components (e.g. communication systems, networking, bots, etc).
• Adopting the various software development tools, approaches, and software frameworks that the company project team uses (e.g. gRPC, databases, microservices, PRISM framework etc)
• Adopting UI/UX best practises
• Generating engineering documentation within the team, to document the various requirements, design, and test areas to be developed
• Overseas travel for training, meetings or deployment can be expected

Job Requirements:

• At least 3-5 years of software engineer experience
• Good knowledge or practical experience in C# and/or C++ will be a plus
• A willingness to learn and develop software in primarily C# and sometimes C++, and learning good programming practices and techniques over time, to ensure efficient performance in a 60-fps simulation/game environment
• A willingness to learn a wide array of technology and technology areas, which can range from frontend to backend software development.
• While company-sponsored training courses and guidance will be provided, independent learning and being a team player is required, to fit into the team’s culture
• Being comfortable to engage and communicate with end users, customers will be a plus
• Singaporeans only

Job Duties:

· Perform maintenance, testing and/or repair services of lifting equipment / hydraulic.

· Troubleshoot equipment faults and carries out preventive and/or corrective action.

· Ensure all work processes comply with quality, environmental and safety procedures and requirements.

· Planning and undertaking scheduled maintenance.

· Responding to breakdowns

· Diagnosing faults

· Supervising engineering and technical staff

· Managing budgets

· Creating maintenance procedures

· Managing stocks of suppliers and equipment

· Other duties as detailed by company when necessary

Our client is from Oil and Gas industry. They are looking for a Production Engineer to assist their team for the next phase of their business. They are located in West.

Duties:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

Our client is from Semiconductor industry. They are now recruiting a Purchasing Engineer to be part of their Purchasing team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Estimate costs for various electronic components and modules.
• Assist in R&D by suggesting new technologies and selecting components.
• Oversee procurement processes for quality, cost, and delivery at NPI projects.
• Optimize product costs through procurement strategies and negotiations.
• Coordinate with internal and external stakeholders and suppliers.
• Facilitate design-to-cost and cost reduction initiatives.
• Support in managing material orders, deliveries, and engineering changes.
• Transfer knowledge to commodity managers.
• Perform tasks as assigned by managers.

Requirements:

• Degree in Electronic/Electrical Engineering or related field.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

ROLES & RESPONSIBILITIES

• Work with other member of multi-disciplinary Engineers to review load profiles and design the Energy Storage System to meet load profiles requirements set out in the technical requirements;
• Develope, maintain and update engineering standards;
• Ensure compliance with Company quality program;
• Provide recommendations for equipment and/or materials selection;
• Perform complex engineering calculations following standard methods and principles;
• Provide technical support to Sales and Marketing or Business development;
• Support multiple projects on the complex technical challenges;
• Develop and apply advanced engineering concepts and approaches to unique engineering problems
• Develop battery container layouts and coordinate with electrical, civil and PV engineering team for complete packages for installation;
• Develop single-line and three-line diagrams with required electrical details for the battery system in accordance with local codes and requirements;
• Model energy storage system performance, coordinate, obtain and integrate BMS, EMS and SCADA designs for the battery system from third party monitoring companies;
• Develop technical specifications and scopes of work for owners, engineering firms and contractors.
• Design for different types of battery enclosure type solutions like cabinet type, container type, building type storage solution;
• Identify and quantify energy conservation opportunities associated with Batteries / PCS / HVAC / FFS for different enclosure systems;
• Investigates design factors such as but not limited to the function, durability, performance, efficiency, and contractual requirements;
• Other scope of work to be assigned.

JOB REQUIREMENTS

• Minimum 3 years of experience in the areas of Renewable Energy Systems, preferably with a specialisation in power systems, solar PV, battery storage, wind energy systems;
• Minimum Degree in Engineering or equivalent;
• Knowledgeable and experience on the different parameters for design, selection, and sizing of the batteries as well leveraging the parameters to optimise sizes of the batteries;
• Experience on Battery Energy Storage System design, chemistry selection, performance modelling, lifetime estimation simulations of batteries, degradation and augmentation schedules, visualization of business model (duty cycle) would be advantageous;
• Strong project management skills;
• Proficient in AutoCAD

The (Senior) Research Engineer must be willing to work on multi-disciplinary research projects at the intersection of computational neuroscience and AI. This includes designing human behavioral experiments and collecting human responses, alongside developing computational models of cognitive functions (visual attention, eye movements, visual perception, memory, context reasoning, and multi-agent decision making).

Job Requirements:

• Bachelor's degree (or above) in Computer Science, background in AI.
• At least 2 years of experience
• Strong analytical and critical thinking skills, good team player with good communication and interpersonal skills
• Proficient in coding any of the following models, algorithms, hardwares, tools (at least 5 from the list below):

Multi-agent Reinforcement learning, deep reinforcement learning, Convolution Neural Nets, Hebbian learning, vision transformer, continual learning, scene graphs, reward, inverse reinforcement learning, backpropogation, shape bias, knowledge distillation, self-supervised learning, augmented memory, variational auto-encoder, associative memory, foveation, Blender, cause-effect, neuro-symbolic, recurrent neural networks, LSTM, Mturk, Prolific, Python, Matlab, Pytorch, Tensorflow, NVIDIA, cross-entropy, maximum likelihood, metric learning, representation learning, open-set, long-tailed, object detection, object classification, mixup, style transfer, data augmentation, curriculum learning, generalization, out-of-distribution, domain shifts, random forest, decision tree, Monte Carlo tree search, hard and soft attention, meta-learning, depth estimation, video tracking, predictive coding

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

• Assembly of parts and also heatstaking of inserts
• Other ad hoc duties

Requirements:

• Min. N or A lvls or Diploma in any courses
• Able to start work immediately with minimal holiday plans
• Office hours Mon to Fri

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Responsibilities:

• Understanding project specifications and developing time schedules and budgets that meet them.
• Negotiating with vendors and contractors to secure the best prices.
• Observing existing processes, analyzing staff performance, and addressing deficiencies accordingly.
• Monitoring and tracking project progress, and writing up reports.
• Attending and scheduling meetings as required.
• Delegating tasks and ensuring workers receive feedback.
• Understanding and meeting all contract requirements.
• Communicating with managers, supervisors, and the rest of the team.
• Analyzing technical drawings and providing material and cost estimates.
• Ensuring all projects are completed on time and within budgets.

Requirement:

• Degree in Engineering or similar.
• Experience in preparation of project schedule in Primavera P6.
• Proficiency in MS Office.
• Planning and project management skills.
• Strong multitasking abilities.

Responsibilities:

• To perform comprehensive maintenance to Public Transportation System.
• To perform site supervision and hands on when required.
• To perform troubleshooting and devise resolution when issues or faults arises.
• To communicate/supervise contractors on safety and work-related tasks.
• To execute job-related tasks assigned by the Engineer/Shift Engineer.
• To complete reports for jobs done.

Requirements:

• Diploma in Mechatronics, Electrical or Electronics Engineering.
• Willing to work at height (4-6 meters) on outdoor public road to maintain the systems.
• Experience in Mechanical/Electrical/Electronic system works.
• Experience in basic Microsoft office, Window system.
• Experience in site supervision work.
• Possess a Driving License to commute to sites.
• Able to work 12-hours rotating day and night shifts.

To apply, please click "Apply Now" or visit www.gmprecruit.com and search for job reference: 23806

GMP Technologies (S) Pte Ltd (EA Licence: 11C3793) | EA Personnel: Novita Widjaja (Reg No.: R22105960)

• Perform commissioning of a system, whether it be naval, terrestrial, or underwater. Commissioning includes potential installation, startup, configuration, and integration with other systems;
• participate in live-fire tests;
• conduct tests, including in the presence of the customer;
• perform operational system surveys;
• perform preventive maintenance, corrective maintenance, and mid-term overhauls;
• participate in general revision activities;
• conduct troubleshooting activities at both the first level (sub-assembly level) and the detailed level (spare parts level);
• compile reports on activities performed, adhering to company documentation that dictates the rules for report compilation;
• assist Program Managers and other managerial personnel during technical meetings with clients;
• assist the Logistics Engineering staff in preparing spare parts lists and estimated intervention durations;
• support the training center in delivering courses;
• collaborate with the "Field Returns" organizational unit to implement the reference database.

Requirements

• Able to perform the following:

- Mechanical drawing interpretation

- Electrical drawing interpretation

- Basic proficiency in using electronic and mechanical instrumentation

• Proficient in Microsoft Office suite (Word, Excel, PowerPoint) English proficiency level A2 Ability to work in a team
• Diploma from a technical mechanical institute / Bachelor's degree in Mechatronics - Mechanical Engineering.

* Please note that only shortlisted candidates will be notified. Interested applicants kindly send in a copy of your latest resume.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to JMC Talent Search Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.jmcsg.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

JMC Talent Search Pte Ltd

• UEN 200416907R • EA License No. 93C4957

• EA Personnel No: R1111089 • EA Personnel Name: Chew Mei Xiu

Our Client is a leader in the Energy Manufacturing industry in Singapore. Due to their current expansion plan, they are looking for a Mechanical Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Conduct scheduled plant inspections as per maintenance regime, ensuring compliance with SOPs, regulations, and safety standards.
• Manage and coordinate the team for planned/ad-hoc Mechanical Maintenance activities.
• Collaborate with internal and external counterparts in the area of work.
• Optimize planned plant/equipment maintenance during overhauls and inspections.
• Supervise maintenance contracts and develop work procedures.
• Analyze mechanical system failures, recommend corrective actions, and troubleshoot issues.
• Implement plant improvement projects to enhance reliability and performance.
• Lead plant improvement processes for availability, efficiency, and cost-effectiveness.
• Prepare technical specifications and manage procurement for maintenance needs.
• Plan and execute works within the budget, tracking expenditures.
• Develop and guide staff on technical matters.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical Engineering or equivalent field
• Min 5 years of experience in engineering/maintenance oil and gas or Utility industry
• Proficient in Mechanical engineering maintenance knowledge and standards.
• Experience with safety and statutory requirements

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Job Role:

• To provide proactive, timely, effective and efficient support to the business users in the Enterprise domain.

• To perform production support activities which involve assignment of issues, issue analysis and resolution within the specified SLAs in the Enterprise domain.

• To own issues and initiatives in the Enterprise domain, and work with the various teams to develop solutions for the users.

• To collaborate with business partners, third party vendors, and technology teams to facilitate the support process and work toward timely and effective issue resolution

Responsibilities:

• Work in the Enterprise domain support team; provide proactive, timely, effective and efficient support to the users in the Enterprise domain space

• Adopt standard Incident Management workflow and processes, i.e. logging incident tickets in a timely manner, following proper Change Management processes, and broadcasting quality issue/impact emails to stakeholders

• Embrace standard Change Control Management practices, procedures and guidelines for application releases and roll-outs

• Participate and collaborate with the Development team in requirements gathering, clarifications, and analyse impact on issues or users’ requirements

• Assist the Development team as needed by validating fixes or enhancements to ensure problems have been adequately resolved

• Participate in annual DR/BCM activities or infrastructure-related upgrades

• Utilize software updates, drivers, knowledge bases, and FAQ resources on the Internet/Intranet to aid in problem resolution

• Troubleshoot 2nd level technical support issues by identifying the root cause and working closely with users and various IT teams

• Be the important bridge between Users and Development team and provide regular updates to all relevant parties

• Articulate and escalate the support issues with detailed investigation/ findings to the Development team if it requires any code change

• Manage and follow up on Problem tickets (those issues escalated to Development team) to make sure that they are resolved and that any implemented fixes are rolled out into Production

• Be the main gate keeper of the Production environment by adopting a proactive approach to being updated and informed on any and all upcoming Production environment changes

• Be proactive to identify any potential risk(s) in upcoming Production environment changes, and flag that to the Development team or Users

• Participate in testing to ensure that only quality defect fixes are rolled out into Production environment

• Identify areas of improvement to drive down the support volume

• Perform system monitoring and set up alerts to improve incident resolution times

• Manage incidents and collaborate with other technology teams as necessary for incident assignment and resolution, identify root cause and corrective actions, and track improvement actions until closure in compliance with the bank standards.

• Review incidents and ensure agreed Service Level Agreement (SLA) are met with various business stakeholders.

Requirements:

• Good team player, independent, proactive and self-starter with excellent interpersonal and communication skills

• Strong analytical and good problem-solving skills

• Ability to work in a fast-paced and team-oriented environment

• Able to adapt to a dynamic change environment, provide on-call 24/7 support and have a positive attitude towards learning on the job.

• 2 – 5 years of hands-on support experience in BMC Remedy, K2 software

• Experience in working with some of these technical platforms or programming languages – MS Windows, Unix, SQL, Unix scripting, Control-M

• Experience working in an ITIL-driven environment, and working knowledge of ITIL principles and processes preferred

Sumit Sambhi

EA License No. – 23C2060

EA Registration No. - R1330510

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

Our Client is a leader in the Energy Manufacturing industry in Singapore. Due to their current expansion plan, they are looking for an HSE Officer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Report and assist section head in safety and fire-related matters.
• Responsible for routine safety checks in subsidiaries and propose corrective actions to section heads when needed.
• Inform and update relevant managers of any machinery, equipment, or process in subsidiaries that pose injury risks and recommend appropriate measures.
• Promote safe and healthy working conditions through education, training, drills, and activities.
• Act as the plant's fire and hazmat leader.
• Act as a fire and safety training when needed.
• Approve permits and serve as a confined space and work-at-height assessor.
• Support daily oversight of HSE Management system and physical inspections of plant facilities.
• Execute and follow up on safety promotions and programs.
• Manage legal register and ensure compliance updates.

Requirements

• Min WSH Level C or a degree in WSH.
• Registered Fire Safety Manager
• Certified confined space and work-at-height assessor.
• Min 2 years of safety experience in manufacturing, logistic and marine industries.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Our client is a Global Manufacturing MNC. Due to their current expansion plan, they are looking for a Process Optimization Lead (CNC programming) to join their team, in hopes of developing the current high performing team. They are located in the North.

Job Responsibilities:

• Develop, implement, and optimize manufacturing and metrology processes for organisation efficiency and capability enhancement.
• Procure and optimize new manufacturing and metrology equipment.
• Lead projects to improve organisation’s manufacturing and metrology capabilities, identifying risks and implementing solutions.
• Provide support during pilot and production phases, including training and issue resolution.
• Supervise department engineers, guiding them in continuous improvement projects.
• Manage non-standard RFQs, advising on resource allocation and exceptions.
• Collaborate with internal teams and customers to align expectations and develop solutions.
• Coordinate with Operational Excellence initiatives for continuous improvement alignment.
• Support engineers and technicians in resolving manufacturing issues and improving quality.
• Participate in training and contribute to relevant publications.
• Any other duties as assigned.

Requirements:

• Minimum Bachelor or Master in Engineering relevant equivalent field of study.
• Minimum 8 years relevant experience in process engineering

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Company Overview: -

• Jurong Island (Transport provided: from Lakeside and Jurong East MRT stations)
• Rotate 12 hour Shifts (8am/pm-8pm/am) However no shift work for first 2 months
• Transport Allowance+Shift Allowance+AWS + Variable Bonus
• Basic Monthly Salary: From $2000 to $2400

Your Responsibilities: -

• Conduct daily site inspections to identify mechanical anomalies, proactively addressing potential issues and ensuring compliance with safety and operational standards.
• Perform repair work on mechanical plant equipment, including diagnosing issues, conducting repairs, and ensuring equipment functionality.
• Assist Team Leaders and engineers with mechanical maintenance tasks, collaborating to address complex issues and maintain equipment reliability.
• Conduct daily hands-on troubleshooting and routine maintenance of mechanical systems to prevent breakdowns and ensure optimal performance.
• Update daily maintenance reports for mechanical systems, documenting work done, issues encountered, and solutions implemented for tracking and reference purposes.

You will need: -

• At least 2 year of relevant working experience in mechanical maintenance
• NITEC in Mechanical Engineering or Equivalent
• Only Singaporean

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Our client is a Global MNC, one of the leading players in the Pharmaceuticals sector. Due to business needs, they are now recruiting a Senior Energy Engineer to be part of their team for ongoing transformation projects. They are located in the West – easily accessible.

Responsibilities:

• Spearhead programs aimed at enhancing utility operations, overseeing the implementation of energy efficiency initiatives across the plant, including the preparation and submission of relevant documentation
• Identify energy cost savings, and propose strategies to optimize energy usage
• Conduct thorough energy audits to assess consumption patterns and potential conservation measures
• Utilize energy modeling techniques, measurement tools, and commissioning processes to enhance operational efficiency
• Gather on-site data through observations/inspections to support energy conservation modelling and analysis
• Evaluate construction designs and specifications to ensure compliance with energy efficiency standards
• Generate comprehensive project reports and technical documentation when necessary
• Research and evaluate renewable energy systems for feasibility and potential implementation on site
• Facilitate regular site energy team meetings to coordinate efforts and track progress
• Monitor energy usage and costs, ensuring alignment with budgetary targets
• Act as a subject matter expert in energy metering management
• Liaise with site leadership and personnel regarding energy program objectives and achievements
• Prioritize and oversee the implementation of energy-related initiatives
• Promote awareness of conservation practices and usage habits among site personnel
• All other adhoc duties as assigned

Requirements:

• Minimum Diploma in any relevant field of Engineering
• Minimum 5 years of relevant working experience
• Possesses Singapore Certified Energy Manager (SCEM) certification

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

RecruitPedia Pte Ltd

EA License No: 19C9682

EA Personnel No: R22104689 (Lim Yu Xun, Acer)

Our client is a Global MNC company in the Manufacturing industry. Due to their current expansion plan, they are looking for a Senior Mechanical Design Engineer (Molding) to join their Engineering team, in hopes of developing the current high performing team. They are located in the West – easily accessible.

Responsibilities:

• Spearhead the company’s design initiatives for product and process innovation/enhancement
• Develop prototypes to validate initial concepts
• Produce detailed engineering drawings with emphasis on Geometric Dimensioning and Tolerance Analysis
• Establish testing protocols for all product designs
• Conduct Intellectual Property research to safeguard the company against potential patent violations
• Manage Projects with stringent deadlines
• All other adhoc duties as assigned

Requirements:

• Minimum Bachelor’s Degree in Mechanical Engineering or other relevant field of studies
• Minimum 5 years of relevant working experience
• Knowledgeable/Experienced in product design (plastic molded parts)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

RecruitPedia Pte Ltd

EA License No: 19C9682

EA Personnel No: R22104689 (Lim Yu Xun, Acer)

Info can be share ATM: -

• Basic $3000 - $4500
• Tai Seng area
• 5 Days (Mon-Fri 8:30am to 5:30pm)

Your Responsibilities: -

• Foster the expansion of key accounts within the Oil & Gas sector, Pharmaceutical industry, and other industrial segments to contribute significantly to the company's growth objectives in Singapore.
• Achieve or surpass predefined sales and gross margin targets for assigned accounts, demonstrating a commitment to exceeding performance expectations.
• Execute all facets of the sales process, encompassing take-offs, project quotations, order finalization, submittal preparation, and resolution of customer issues, to nurture and expand both new and existing customer bases.
• Deliver technical sales support and advisory services to clients for electrical product sales, aiming to foster business opportunities and enhance client engagement.
• Cultivate enduring and fruitful relationships across all levels of client organizations, ensuring sustained loyalty and business growth.
• Acquire an in-depth understanding of products, the electrical goods market, and competitors to maintain expertise and capitalize on market opportunities effectively
• Emphasize the identification of precise technical customer needs while concurrently gathering pertinent commercial and competitive insights linked with each account.

You will need: -

• Possess a valid Class 3 driving license
• Minimum Electrical Engineering qualification or equivalent.
• Preferably with 1-2 years of hands-on sales experience.
• Only Singaporean May Apply

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Info can be shared ATM: -

• Basic UP $3000 (No Exp Req) + Transport Allowance + VB
• 5 days (Office hour)
• East

Responsibilities: -

• Provide technical support for machines, including troubleshooting issues, performing maintenance tasks, and optimizing machine performance to enhance productivity and efficiency.
• Offer direct support on machines at local and overseas customer facilities.
• Attend weekly meetings and presentations.
• Write technical reports detailing machine performance, maintenance activities, troubleshooting procedures, and any improvements or recommendations for future operations.
• Able to handle specific jigs and tools during service jobs.
• Assist Senior Engineers in performing higher-level technical tasks.
• Performe ad-hoc delivery of parts to customers.
• Performing service, installation, and troubleshooting jobs both locally and overseas, traveling as needed to customer sites to address technical issues, install equipment, and ensure smooth operation of machines and systems.

Requirements: -

• Min. Nitec in Electronics / Electrical / Microelectronics Engineering
• No experience required, training is provided
• Proficient in Microsoft Office and SAP B1
• Willing to travel islandwide

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Info can be shared ATM: -

• Basic UP $2600 (No Exp Req) + Transport Allowance + VB
• 5 days (Office hour)
• East

Responsibilities: -

• Diagnose, repair or install new or modified equipment at customer facilities
• Investigate and resolve customer reports of technical issues
• Conduct training for customers on the safe operations of equipment & maintenance
• Process spare part order and promote service contract with customer.

Requirements: -

• Min. Nitec in Electronics / Electrical / Microelectronics Engineering
• No experience required, training is provided
• Willing to travel islandwide

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541