Job Description

• Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.
• The detailed duties and responsibilities includes but not limited to the following:

1. Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.
2. For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
3. Supervise site works according to the quality and EHS requirements.
4. Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
5. Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

• Assists BIM Manager in the implementation of BIM
• Good planning skills in managing modelling and drafting works, able to manage BIM modelers work scope & work schedule.
• Collaborate with team and other relevant departments to ensure all drawings are in order as per construction & submission requirements

Job Requirement

• Degree in Architecture / Engineering
• Preferably with a minimum of 2 years of working experience in coordination. (Architectural or M&E)
• Minimum 2-3 years' experience in BIM modeling (Architectural or M&E)

• Reports to Construction Manager
• Ensure all relevant permits and clearances obtained from respective agencies prior any excavation works
• Ensure all resources provided (manpower/equipment) comply with stakeholder’s requirement
• Coordination and liaison works with relevant authorities / agencies on services /stakeholder for utilities and diversion works
• Facilitate Permit-to-dig application from Client / Stakeholders
• Attend the meeting with the stakeholder/client
• Generate and handle company reports, meetings and documents required
• Propose alternative work method or other way to increase productivity
• Provide advise on appropriate measures on services / utilities protection and adopt safe work procedure to prevent damage to utilities
• Ensure the activities comply with the quality, environment, health & safety requirements

Job Requirements:

• Degree in Civil Engineering or its equivalent
• Minimum of 5 years relevant experience in road construction projects
• Possess basic understanding of Permit-to-Dig process and application
• Proficient in Microsoft Office and AutoCAD
• Attained BCSS/Confined space
• Qualified as a Licensed Cable Detector Worker (LCDW), Licensed Telecommunication Cable Detection Worker (TCDW)
• Registered Earthwork Supervisor (RES) with EMA/SPPG
• Ability to perform task under pressure and multi-task
• Hardworking and willing to learn
• Good interpersonal skills
• Past experience in LTA project (NSC) is an added advanatge
• Project: Viaducts
• Location: Woodlands

We are seeking a talented and detail-oriented Release Engineer to develop, maintain, and optimize tools and processes that improve engineering productivity and operational efficiency. The ideal candidate will drive alignment between development and operations teams, enhance automation practices, and deliver high-quality solutions that support continuous integration and deployment pipelines.

Key Responsibilities:

• Develop, maintain, and administer tools to automate operational tasks and improve productivity.
• Create reusable, scalable, and testable automation scripts and tools for routine tasks.
• Drive standardization, automation, and self-service practices in the SDLC/SDLC2 processes.
• Identify and implement industry best practices and pursue continuous improvement opportunities.
• Propose, research, and prototype new technologies, tools, and concepts, integrating them into team practices.
• Develop and implement CI/CD roadmaps for projects.
• Configure and manage Jenkins CI/CD pipelines, enabling smooth production deployments.
• Configure and integrate OSS, Sonar, and Fortify for continuous quality assurance, including automation testing and load testing.
• Collaborate with development and operations teams to enhance automation and cloud adoption.
• Support Agile/Scrum methodologies during project execution.
• Automate continuous delivery and on-demand capacity management solutions.
• Troubleshoot, diagnose, and resolve software and system issues efficiently.
• Develop configuration and infrastructure solutions for internal deployments.
• Build and manage EAPI with unit testing, code coverage, and enhancements.
• Suggest architecture and process improvements.
• Evaluate and recommend new technologies and vendor products.
• Ensure critical system security using best-in-class security solutions.

Qualifications:

• Proven experience in release engineering, DevOps, or related roles.
• Hands-on expertise with CI/CD tools like Jenkins, GitLab, or Azure DevOps.
• Proficiency in automation scripting (Python, Bash, etc.) and infrastructure-as-code (e.g., Terraform, Ansible).
• Solid understanding of Agile methodologies and cloud technologies (AWS, Azure, or GCP).
• Familiarity with static and dynamic code analysis tools (SonarQube, Fortify, etc.).
• Strong problem-solving skills and a proactive approach to troubleshooting.
• Experience with containerization tools (Docker, Kubernetes).
• Knowledge of monitoring and logging solutions (ELK, Prometheus, Grafana).
• Experience with security compliance frameworks and standards.

To apply, simply click the "Apply" button or send your updated profile to [email protected]

EA Licence No.:18S9405 / EA Reg. No.:R1330864

Percept Solutions is expanding and actively seeking talented individuals. We encourage applicants to follow Percept Solutions on LinkedIn at https://www.linkedin.com/company/percept-solutions/to stay informed about new opportunities and events.

Job Descriptions:

Assist in foreigh workers management pertaining to:

• MOM work passes application, renewal and cancellation
• Month end payroll process
• Prepare HR letters, eg. employment contracts, increment, warning, etc.
• Course registration, renewal and arrangement
• Dormitory matter (check in/out)
• Maintain employee records
• Daily attendance report
• Other ad-hoc duties when assigned
• General admin duties, eg. handling email, phone call and incoming mail.

Requirement:

• At least 1 years experience
• Good communication & interpersonal skills

• Site preparation and co-ordination, preparation of submission documents.
• Coordinate, liaise and manage various project stakeholders including customers, consultants, sub- contractors, vendors, etc. on site to ensure project requirements are met.
• Able to communicate effective to all stakeholders.
• Prepare and create detail work schedule, manpower and resource planning.
• Able to understand Engineering drawings and perform basic engineering calculations, design, etc.
• Coordinate the safety management system on site.
• Follow up and reporting on the project progress.
• Able to understand Singapore standards or Code of Practice.
• All other ad-hoc tasks as assigned by reporting manager.

Requirements:

• Relevant Qualification in Mechanical Engineering or equivalent.
• For experience candidates, preferably to possess minimum 2 years relevant experience in the Construction / Industrial Engineering industry.
• Experience in design ACMV / Piping and Piping Structural Support/ Ducting
• Experience in manufacturing plant construction, Data Centre fit-out works, etc.
• Outgoing with strong interpersonal and communication skills.
• Ability to work independently and target oriented in a fast-paced environment.
• Ability to interact effectively with project members and managers at all levels.

Bayes provides career opportunities with reputable and progressive Employers and prioritizes the interests of all whom we represent. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

All personal data supplied will be treated in confidence, and as permitted by law. For further enquiries, please visit our website which shares our Privacy and Data Protection Policy.

Kashmiethaa V Chandran | Associate

Built Environment Vertical

EA Registration R24122846

Responsibilities:

• Provide Computerized System Validation (CSV) / Computerized System Assurance (CSA) consulting services for pharmaceutical and medical device Manufacturing company.
• Manage SDLC (system design life cycle) including risk, deviation and change managements (e.g., conduct risk impact or functional assessment(s))
• Ensure Good Documentation Practices, working with policy and procedural governances, assessments, plans, reports etc.
• Develop and execute FAT/SAT test scripts, qualification protocols and reports based on industry best practices and Client’s / Solution Provider’s documentation system.
• Review, analyze and evaluate system functions and processes to deliver validation deliverables.
• Develop approach using science- or risk -based approach that meets regulatory expectation.
• If a Senior member of the team, serve as Lead for CSV service in one or more of the following disciplines:
• Production/Manufacturing System (e.g., MES, DCS, Historian)
• Laboratory Instruments/Equipment/Enterprise system (e.g., LIMS, Empower)
• Engineering/Automation (e.g., BMS, Delta V)
• Emerging technologies (e.g., SaaS platforms, Cloud system)

Requirement:

• Bachelor’s degree in technical discipline such as Engineering, Science or IT. Graduates of related discipline may also apply.
• Possess 2 or more years of experience performing CSV activities.
• Experience in engineering / process automation such as DCS, Delta V, Historian, MES and/or PLC would be viewed favorably
• Ability to communicate quality and risk-related concept to technical and non-technical audiences

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

Job Responsibilities

• Devising and implementing methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment
• Designing and analysing inspection and testing processes, mechanisms, and equipment
• Conducting quality assurance tests and performing statistical analysis to assess the level of control and manage product quality risks
• Undertaking root cause analysis of incidents requiring corrective action
• Ensure that corrective measures and deviation meet acceptable reliability standards
• Other ad hoc duties assigned

Job Requirements

• API Q1 and Q2 certifications
• Internal audit certification

Interested applicants please send your resumes to [email protected]

Jessica Nguyen Huynh Thanh Truc

Recruiter (R23113787)

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

Our client is transforming the cleaning industry with advanced robotic solutions that tackle manpower challenges. Their innovative robots are already making a difference in 30 countries! As they continue to grow, they are seeking a Electrical Engineer (Senior) to join their team.

As a Electrical Engineer (Senior) specializing in Wire Harness design you are to lead the development and integration of wiring solutions for innovative projects, ensuring seamless integration with electrical systems and adherence to safety standards.

Key Responsibilities:

• Lead wire harness design, development, and integration for various projects.
• Create wire harness schematics and layouts using tools like E3.series, SOLIDWORKS Electrical, AutoCAD Electrical.
• Collaborate with cross-functional teams to ensure seamless integration.
• Analyze and test wire harnesses, solving issues and selecting materials.
• Ensure compliance with industry standards and safety protocols.
• Manage supplier relationships and provide technical support during manufacturing and testing.
• Document design and testing activities, including reports and specifications.
• Contribute to project planning and define scope, objectives, and timelines.

Requirements:

• Bachelor's in Electrical Engineering (Masters preferred).
• 3-5 years of experience in wire harness design and integration.
• Proficiency in CAD tools for wire harness design.
• Strong knowledge of electrical principles, circuit theory, and design practices.
• Proven ability to manage complex projects and lead teams.
• Excellent communication and problem-solving skills.
• Knowledge of industry standards and codes.
• Strong project management skills with the ability to meet deadlines.

Interested candidates are invited to send in your Resume in MS Word Format stating your past work experience, reasons for each leave, past and expected remuneration.

We regret to inform that only shortlisted candidates will be notified.

By submitting an application to us, you will be deemed to have agreed for us to collect, use, and disclose your personal data which you have submitted to your prospective employers, for the purpose of job search, and/or other services which you have consented us to perform on your behalf.

Attn: Woo Gu Ming (R24123795)
Cultivar Asia Pte Ltd (MOM EA License: 19C8782)

• West, 5 days, Transport provided to & fro
• Basic salary: $3500 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits
• No experience can apply
• On-the-job training is provided

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• 1-2 years of relevant experience.
• Candidates with no experience can apply as on-the-job training is provided.
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• 
  
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Job Description:

•Upkeeping test lab and adherence to the lab operational requirements in accordance to the Organisation Principle PQS

•Conduct testing accordance to applicable product standards, guidelines, regulations and dormakaba Corporate Standard (DCS)

•Conduct qualification test of new product or revised component with issuing of test report and recommendations to the test findings

•Develop test scripts, issues tracking and test management

•Prepare samples and coordinate with PQS EN or certification bodies for product certifications

•Manage annual notified body surveillance testing and follow up on non-conformance cases

•Support investigations of product failures

•Actively participate and manage projects to meet deadline

•Evaluation and analysis of competitors’ products – teardown analysis, VA/VE

Job Requirements

•Diploma/Degree in engineering with minimum 2 years of experience, preferably with working experiences in production quality or test lab environment

•Good hands-on skills in hand tools and able to handle installation of fixtures/machinery with weight up to 30kg

•Possess good knowledge in failure analysis of metals and materials related products

•Experience with testing or life cycle management tools an advantage

•Familiar with CAD software is preferable

Responsibilities:

• Research in the short-range wireless technology innovations and applications with focus on Wi-Fi and UWB, and undertake one or more of the following responsibilities:
• Research the innovation of system architecture and key technologies of short-range wireless, and gain insights on the technologies and trends of short-range wireless;
• Propose efficient solutions for algorithms and problems related to short-range wireless and carry out related verifications.
• Involve the standardization of short-range wireless, propose innovative solutions to the identified problems, and prepare contributions to promote your solutions.

Requirements:

• Master/PhD degree in Communications, Electrical & Electronics, Computer Science/Engineering or related discipline, with strong background on signal processing and/or protocol design for communications, positioning and/sensing.
• Good knowledge on IEEE 802.11 protocol family (e.g. 802.11n/11ac/11ax/11be) and/or IEEE 802.15 protocol family (e.g. 802.15.4z) will be a plus.
• Skills in wireless system simulation using Matlab, C/C++, NS-3 and/or other tools will be a plus.
• Excellent written and verbal communication skills, and interpersonal skills.

Next Step

Click “apply” or send resume to: Ryce [email protected]

EA Licence No.91C2918| Personnel Registration No. R2311725

Responsibilities:

• Assist Project Manager to oversee overall project progress, manpower and monitor project schedule
• Preparation of engineering detail design development for the project where applicable
• Able to carry out testing & commissioning and basic troubling shooting of the system
• Ensure project complete within the time frame
• Day to day site co-ordinations with main contractors and sub-contractors
• Prepare, plan and request site inspection with main contractor or RTO
• Ensure the allocation of resources as planned and submit daily work progress and manpower forecast report
• Monitor and request for equipment and material delivery
• Ensure equipment, material and site work compliance to specifications
• Preparation, submission and obtain approval of MOS, RA, SWP, shop drawings, material, equipment, RFA, RFI etc
• Attend technical meeting, daily site progress meeting and safety meetings
• Preparation of OMM manual, As-Built drawings, training and DLP program
• Knowledge of ACMV/HVAC air-conditioning
• Knowledge and adherence of WSH, ESH standard

Requirements:

• ITE/Diploma/Degree or equivalent in Mechanical Engineering
• Experience in project management handling ACMV projects for industrial or commercial purpose. Fresh Graduate are welcome
• Good communication and interaction skill
• A team player and possess problem-solving, coordination and management skills

Job Responsibilities:

• Conduct Process engineering and design, including process configuration and optimization studies
• Perform Process simulations, prepare Process/Utility Flow Diagrams, Heat and Material Balance, and Utility Balances
• Create Piping and Instrumentation diagrams (P&IDs)
• Prepare datasheets for process equipment and instruments
• Conduct relief and blowdown studies, analyze relief load scenarios and calculate flare network requirements
• Perform process calculations for equipment sizing and line hydraulics
• Create Process design philosophies and operating guides
• Collaborate on Concept Studies, Front- End Engineering Design (FEED) and detailed design projects

Job Requirements:

• Bachelor's Degree in Chemical Engineering
• At least 12 years of relevant engineering design experience
• Good experience with Offshore FPSO, Oil and Gas, and LNG terminal projects. Experience on Energy transition projects will be an advantage
• Leadership experience in managing process teams for Hydrocarbon projects
• In-depth understanding of process design, heat and material balance, and P&IDs
• Preference will be given to candidates with Lead / Area Lead Engineer experience
• Familiarity with international codes and standards, software and tools

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Familiar with AUTOCAD Software.

Benefits:

• Performance Bonuses and Incentives
• Opportunities for professional development and career advancement
• Collaborative and inclusive company culture

Responsibilities:

• Oversee and coordinate the maintenance activities of the team, including preventive, predictive, and corrective maintenance
• Develop and implement maintenance strategies and procedures to optimise equipment performance and minimise downtime
• Monitor and analyse maintenance data to identify trends and opportunities for improvement
• Provide technical guidance and support to the maintenance team, ensuring they have the necessary skills and resources to perform their duties effectively
• Collaborate with other departments, such as production and engineering, to ensure a coordinated and integrated approach to maintenance
• Ensure compliance with all relevant health, safety, and environmental regulations
• Participate in the development and implementation of continuous improvement initiatives
• Manage and mentor the maintenance team, fostering a culture of continuous learning and development

Requirements:

• Minimum 5 years of experience in a maintenance supervisory or team lead role, preferably in the chemical processing industry
• Strong technical knowledge of industrial equipment, maintenance best practices and troubleshooting techniques
• Excellent problem-solving, critical thinking, and decision-making skills
• Proven experience in leading and motivating a team of maintenance technicians
• Effective communication and interpersonal skills, with the ability to liaise with stakeholders at all levels
• Fire Safety Manager certification will be added advantage.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1985234

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description & Requirements

Job Description & Requirements

Roles and Responsibilities

• Site project management.

• Overall project planning, scheduling, monitoring and updating to meet project

completion targets.

• Daily site activities planning, preparing

work breakdown, daily site operations, site

coordination, monitoring and report work

progress.

• Work closely with sub-contractors on

project progress and ensure timely work

arrangements

• Liaise with consultant and carry out site

inspection.

• Attend weekly or monthly meeting with

sub-contractors on work progression and

prepare monthly meeting progress report.

• Preparation of structural analysis, loading

calculation and drawings.

• Establish good relationship with all

relevant parties.

• Ensure site safety & compliance to

authorities’ requirements.

• Perform other construction-related

duties as assigned by Reporting Manager.

Job Requirements:

Degree in Civil or relevant Engineering

Min. 3 years of working experience.

Office software

Experience in Infra-structure project more

than 200million.

· Preventive and breakdown maintenance of equipment, machinery, and vehicles.

· Implementing new automation systems to improve productivity in knitting, tailoring, retail, and F&B equipment.

· Evaluating the feasibility of using whole garment knitting machines for our products.

· Developing automated machinery to safely collect used cooking oil for trade with biodiesel and SAF manufacturers.

· Supporting the implementation of green initiatives, including converting gas-fired ovens to electric ovens and installing electric vehicle chargers.

Requirement: Bachelor’s degree in Mechanical Engineering or a related field; a Master’s degree is a plus.

• Professional Engineering (PE) license is preferred but not mandatory.
• Minimum of 8 years above experience in mechanical engineering, specifically in the field of industrial machinery and tools.
• Proficient in CAD software (SolidWorks, AutoCAD, or equivalent) and simulation tools.
• Strong understanding of mechanical principles, materials science, and manufacturing techniques.
• Experience with project management and the ability to meet deadlines.
• Excellent problem-solving skills and attention to detail.
• Strong interpersonal and communication skills, both written and verbal.
• Ability to work collaboratively in a team-oriented environment.

EA License No: 96C4864

Reg. No.: R1873093 LOH CHIANG SOON

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.

Responsibilities:

• Solutions delivered on time and on budget.
• Perform maintenance on time.
• Provide timely and satisfactory issues resolutions.
• Conduct training, presentation to internal and external customers.
• Manage internal and external customers.

During System Implementation Phase:

• At site survey to ensure infra and network is in accordance to solutions requirements.
• Install, Configure solutions at sites.
• Manage User Acceptance testing at sites.
• Conduct User training at sites.
• Document handover items for customers at sites.

During Maintenance Phase:

• Ensure all delivered solutions are in operation.
• At site or remote to support and troubleshoot issues related to the delivered solutions.
• At site to perform solutions preventative action, monthly patching or upgrade.
• At site testing and delivery of Samsung devices.
• Work closely with the HQ Technical Support & R&D for critical issues escalation and VOC compilation.

Requirement:

• Diploma or Degree in Computer Science or Information System related fields
• Server and/or cloud certificate is highly preferred.
• At least 2 years of experience in network administration, QA testing, software installation and maintenance.
• Knowledge in the use of VM software and system OS (Windows Server, JAVA, Apache Tomcat, Redhat, Ubuntu, etc.).
• Knowledge in the configuration management such as AD, CA, DNS etc.
• Knowledge in the use of database: MSSQL, MYSQL etc.
• Knowledge on Cloud (i.e., AWS, Azure, or similar) and on-premises infrastructure deployment.
• Excellent problem solving, and analytical thinking.
• Good at documentation (specification, user guide creation)
• Excellent communication skills; able to present technical topics to non technical audience.
• Subject to government G50 clearance (compulsory)

Preferred Qualification:

• Knowledge in MDM related solutions and technology (such as Samsung Knox, Android Enterprise, VMWare Workspace ONE, MobileIron, Citrix Endpoint Management, Microsoft Intune, and etc) are a plus.
• Programing and software development skill in Java, XML, HTML, Android development are a plus.
• Project Management experience and/or certificate.
• Experience in designing cloud system environment, able to manage cloud resource with automation.
• Ability to take up a new technology and perform development based on client requirements.

Job Responsibilities:

• Lead Process Engineering and design, process configuration and optimization studies
• Perform Process simulations, prepare Process/Utility Flow Diagrams, Heat and Material Balance, Utility Balance
• Create Piping and Instrumentation diagrams (P&IDs)
• Prepare datasheets for process equipment and instruments
• Conduct relief and blowdown studies, analyze relief load scenarios and calculate flare network requirements
• Perform process calculations for equipment sizing and line hydraulics
• Prepare Process design philosophies and operating guides

Job Requirements:

• Bachelor's Degree in Chemical Engineering
• At least 20 years of relevant engineering design experience
• Have worked on Concept studies, FEED and detailed design projects
• Good experience with Offshore Oil and Gas, and LNG terminal projects. Experience on Energy transition projects will be an advantage.
• Have led process teams on Hydrocarbon projects
• In-depth understanding of process design, heat and material balance and P&IDs
• Familiarity with international codes and standards, software and tools
• Candidates with Lead Engineer experience will be given preference

Menicon is a contact lens specialist embracing precision craftsmanship to see life in detail. Join our family in Singapore, the first manufacturing facility outside Japan for daily disposable contact lens and a base for developing technologies and products with advanced, value-added features.

Be part of our journey toward digitalization, where you’ll play a key role in advancing automated systems and smart technologies to enhance efficiency. Join a team that leverages innovation to transform manufacturing processes and deliver exceptional quality.

Key Responsibilities:

• Provide control system support, to improve efficiency and reliability of manufacturing equipment and processes.
• Collaborate closely with mechanical, validation, and process engineers to optimize equipment & processes including data analysis for problem resolution.
• Initiate and spearhead software improvement projects on control systems and manage testing, validation and implementation
• Engage in cross-functional team projects aimed at machine and process improvements, embodying teamwork, responsibility, and a capacity for independent work.
• Lead training sessions to enhance the technical skills of operational and technical teams, ensuring smooth transfer and operation of automated equipment.

Minimum Requirements:

• Degree in Engineering or related field.
• 3 years work experience in designing control systems for manufacturing equipment
• Competent in SCADA and PLC programming
• Knowledge in C# will be an added advantage

Project Engineer

Visit www.ppsjob.com.sg

JOB SCOPE

Overall supervision of assigned projects, to ensure timely completion of projects, within the approved budgets set by the Project Manager and the management.

Plan and prepare all project program with indication of Critical Path to complete assigned projects in a timely manner.

To liaise with all subcontractors, consultants and owners on project matters and to resolve all technical discrepancies and site issues.

To supervise and ensure that acceptable workmanship and quality of projects are obtained to the management and consultants’ approval.

To attend, prepare and report on project progress, milestones and targets during meetings.

To organize and to chair regular site meetings with subcontractors and suppliers.

To ensure quality of works is achieved and safety & environmental regulations are complied with

Manage public feedbacks pertaining to site issues

Any other adhoc projects and duties as assigned by management.

JOB REQUIREMENTS

Min Diploma in Civil Engineering / Project Management

Degree in Civil Structural Engineering recognized by Singapore Professional Engineers Board and BCA

Minimum 3 years working experience in building construction

Use of AutoCAD would be an advantage

Proficient in using Microsoft Office and familiar with Microsoft Project

Civil Engineer (Project & Site coordination)

Civil constriction projects

Primary Role

Responsible for advanced Planning, designing, integrating, installation, rigging and lifting equipment, including management of contractors and vendors

Responsible for supervising and assessing the set-up of all project components, manage all aspects of an engineering project, prepare schedules, communicate with clients, project progress.

Key Activities

1. Oversee and regularly review engineering processes and resources to maximize efficiency and productivity
2. Develop plans for new engineering initiatives, including investigating new technologies and developing plans for new project implementations
3. Required to be analytical and precise, to explore alternative solutions and analyze feasibility of plans
4. Work independently and to coordinate closely with internal and external stakeholders to implement new processes and technology, to offer innovative solutions to customers
5. Design, communicate and implement an operational plan, create and maintain cost estimates for projects and programs
6. Identify, develop, and gather the resources necessary to complete the project. This may include preparing engineering standards, designs, and work specifications
7. Developing project schedules, budgets, and forecasts; and selecting materials, equipment, and external contractors
8. Liaise with other operational areas in the organization (engineering, design, drafting, technical) to secure specialize resources and contributions for the project
9. Conduct project meetings and prepare regular reports to communicate the status of the project within and beyond the project team
10. Set priorities, allocate tasks, and to meet project targets and milestones, ensure smooth authority submission
11. Solve technical issues such as drawing discrepancies, site condition changes, verify plans, drawings and quantities for accuracy, raise RFI when necessary
12. Ensure accuracy of setting out, levelling and site surveying and all materials used and work performed are as per specifications
13. Liaising with project consultants, architect, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project
14. Support Project manager to liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws
15. Liaising with clients and their representatives (architects, engineers, and surveyors), including attending regular meetings to keep them informed of progress
16. Overseeing quality control and assist safety department to achieve health and safety target on site
17. Preparing method statement, daily weekly and monthly report
18. Ensuring all site inspection and record as per client/developer requirement
19. Ensuring all testing and quantity inspection are carried out as per contract requirement
20. Analyze and resolve engineering problems and demonstrate effective skills in oral and written communication

Requirements

Min 3 years experiences in civil, infrastructure projects

Bachelor degree in Civil Engineering, PE board recognized

You will work closely with development teams to implement SRE best practices, automate operations, and ensure the reliability of our distributed systems. This role combines software engineering with systems engineering to create sustainable, resilient infrastructure solutions that support our rapidly growing platform.

Responsibilities:

• Design, implement, and maintain scalable infrastructure automation using Infrastructure as Code principles
• Lead and implement SLI/SLO frameworks to measure and improve system reliability
• Develop and maintain monitoring, alerting, and observability solutions
• Participate in on-call rotations and lead incident response efforts
• Drive postmortem processes and implement systematic improvements
• Collaborate with development teams to improve system reliability, performance, and efficiency
• Build and maintain tools and frameworks to automate routine operations
• Contribute to capacity planning and performance optimization initiatives
• Champion SRE best practices and mentor junior team members

Qualifications:

• 5+ years of experience in Site Reliability Engineering or similar roles
• Golang is an added advantage
• Cloudflare deep knowledge
• CNCF cert preferred, familiar with Rancher K8s control engine
• Know how to properly use KMS like Hashicorp vault enterprise
• Deep knowledge in ETL
• Strong knowledge of monitoring systems, logging infrastructure, and observability tools
• Solid understanding of networking concepts and distributed systems
• Experience with CI/CD pipelines and automation tools
• Strong problem-solving skills and ability to debug complex production issues
• Experience with high-volume, distributed systems in a production environment
• Knowledge of security best practices and compliance requirements
• Excellent communication skills and ability to collaborate effectively with global teams

Preferred Qualifications:

• Experience with chaos engineering practices
• Contributions to open-source projects
• Experience with performance tuning and optimization

Maintenance Leader (Manufacturing plant maintenance, Lakeside)

• Salary: Up to S$6,500 + AWS + VB

• Work Location: Western of Singapore (2-way company transport provided from Lakeside MRT)

Requirements

• Diploma or Bachelor in Mechanical Engineering or related engineering field.

• 3 years or above working experience at Process Plant, process good problem solving skills, troubleshooting, maintenance skills.

• Proficient in English, with excellent communication skills to effectively collaborate with a diverse team.

If you are interested in this opportunity, submit your application now (with your salary details and notice period) to [email protected] find out more about this position. Thank you.

Chen Hsiu Wen (Winnie) | Personal Reg No: R1980765
Manpower Staffing Services (S) Pte Ltd | EA License No: 02C3423