Job Description & Requirements

• Liaise with Clients, Consultants, and Authorities for management of the project
• Must have the experience in Diaphragm wall and pilling
• Perform Civil/Structure engineering design works
• Responsible for on-site technical / engineering / administrative matters
• Involve in project planning, implementation, and close monitoring of projects
• Determine best materials and methods with Professional Engineers
• Liaise with Architects on design and safety of the structure
• Analysis of structural components with engineering software
• Prepare drawings, specifications, and computer models of the structure
• Ad-hoc duties as assigned by the Senior Engineer

Requirements:

• Candidate must possess at least Degree in Civil/Structural Engineering
• Minimum 10 years of LTA experience required
• Required Skill(s): Good communication and interpersonal skills, ability to liaise with all levels of people
• Relevant experience in the design of Buildings, Civil and Infrastructure works
• Preferably with project site co-ordination experience
• Knowledge of engineering software and MS Office

Job Description & Requirements

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices.

Requirements:

• Possesses at least 7 years of experience in design and construction.
• Minimum Degree in Civil Engineering from accredited Universities.
• Experience in MRT & LTA projects
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software.

Well versed in Autocad and BIM software is preferred

We are an electrical consultancy company dealing with consultancy, design, licensing, vetting of design, inspection of electrical installation works, including high voltage electrical installation, lightning protection system, general lighting and power system for industrial, commercial, residential electrical installations. We have professional electrical engineer and licensed electrical engineer to provide guideances for new staff. We are looking for applicants who graduate in electrical engineering from ITE, Polytechnics, University, with or without experiences. Starting salary will be $2,000 to $5,000 per month depening on paper qualifications and year of experiences. We offer 5 days' work per week. If you are required to work overtime, or on Saturday/Sunday, time off will be given. We look forward to receiving your job applications

In Schneider Electric everything we do promotes progress and sustainability for all — our colleagues, customers, partners, and the communities and societies where we live and work. From the products, software, and services driving the digital transformation of energy management and automation to corporate citizenship and volunteer activities, we make an impact by helping people and organizations become more resilient and efficient, more electric and digital.

Which is where you come in. Working at Schneider Electric means working toward a cleaner, better world. You're part of a global team built on inclusion, mastery, purpose, action, curiosity, and teamwork, turning sustainability ambitions into actions.

We are looking for Service Engineer (PLC) to make an impact!

The Role:

As a Services Engineer, you will work within the Services operations team in Singapore and you will be responsible to support any job assign to you to ensure customer satisfaction with Schneider products and its services.

What will you do?

• Perform field service (customer site service) activities involving the installation supervision, commissioning, maintaining, modification, onsite training, system upgrade and repair of Schneider PLC.
• Responsible for a region or subgroup of field services.
• Performs installation supervision and commissioning of Schneider products including day to day service of the same.
• Performs maintenance for Schneider PLC.
• Trains customers on equipment operation and maintenance of Schneider PLC Product.
• Represents Schneider dealing with customer concerns.
• Responsible for identifying and reporting failure modes encountered when in the field. Also responsible for determining the cause of these failures.
• Solve Site problems at customers site and provides reports on these issues.
• Providing 24hrs telephone support for customers.
• Acquisition of Customer Service products.
• Support internal for spare parts warranty, preparation and assembly.
• Improve on site report and process.

What qualifications will make you successful?

• Min Diploma / Degree in Electrical & Electronics Engineering
• Min 3-5 yrs exp. in Oil & Gas sector, Power Generation, Petrochemical technical experience is an added advantage.
• Has experience and skilled in PLC. Technical knowledge of MV and LV equipment will be an added advantage.
• Willing to travel up to 80% within Region.
• Has teamwork and is customer oriented.
• Has good time management and able to work under pressure.
• Excellent verbal and written communication skills in English are essential.
• Ability to interface with all functional areas of the company.
• Skilled in Microsoft Office – Excel, Word and Power Point.

What’s in it for me?

• Global Family Leave
• Comprehensive medical coverage for employee and dependents
• Worldwide Employee Stock Ownership
• …and more!

Let us learn about you! Apply today.

You must submit an online application to be considered for any position with us. This position will be posted until filled.

Job Description & Requirements

Control and monitor work progress and ensure work quality.

· Responsible for working closely with project team and resolving technical issue

· Responsible for coordination and liaise with contractors, suppliers, and consultants

· Prepare and compile related report

· Attend site meetings

· Any other ad-hoc duties assigned

Requirements:

· Engineering or Civil / Structural Engineering Diploma / Equivalent

· Minimum 5 years’ relevant experience

· Carry out project planning, scheduling, cost control

Resposibilities:

• Receive customer enquiries through customer portal or email.
• Download, update, and monitor customer product Bill of Material (BOM), drawings, and specifications and its revisions.
• Prepare Sales quotation/proposal/tender documents during RFQ/quotation stage.
• Check and ensure compliance to all specifications prior to providing customer the proposal.
• Calculate material, machining, cladding and other associated costs to quotations.
• Ensure quotations submitted are competitive and maintain a good profit margin.
• Follow-up on proposals with clients to secure orders.
• Prepare and distribute a Sales Order Job Launch when customer awards Purchase orders.
• Project Management on active Sales Orders and delivery schedules.
• Manage and build customer relationships and improve customer satisfaction.
• Coordinate with other departments to compile and submit documentations as required (e.g. pre-production/ final product documentations, concessions/non-conformances)
• Establish positive communications with customers regularly.

Requirements:

• Diploma/Bachelor’s Degree in Mechanical Engineering or related
• Highly motivated and driven
• Strong interpersonal and communication skills
• Team player
• Analytical, resourceful, and possess problem-solving capabilities
• Willing to undertake ad-hoc project assignments and be able to multi-task
• Proficient with MS Office tools
• Knowledge/interest in oilfield components and equipment will be an added advantage

What's in it for you?

• Bespoke training and development programs
• Fun & open working culture
• Staff parties and company events
• Recreation room - pool table, karaoke system, board games, gaming consoles
• On-site gym facilities
• Accessibility (2-mins walk from MRT)

As the IT Operations Engineer for this project, you will play a critical role in overseeing and managing the operational aspects of our systems deployed in the government's commercial cloud environment. This position requires technical expertise in cloud technologies, and a good understanding of government regulations and compliance standards. You will be responsible for ensuring the smooth operation, security, and efficiency of our cloud-based systems while adhering to strict government guidelines.

Roles & Responsibilities:

Cloud Infrastructure Management:

• Manage the day-to-day operation of our government's cloud infrastructure on the Commercial Cloud (GCC) platform.
• Oversee the deployment, configuration, and maintenance of cloud services to meet the needs of government agencies.
• Ensure high availability, scalability, and performance of cloud resources to support critical government operations.

Security and Compliance:

• Implement and enforce security best practices to protect government data and systems on GCC.
• Stay updated on government regulations, compliance standards, and security protocols relevant to cloud computing.
• Conduct regular audits and assessments with vendors to ensure compliance with regulatory requirements and industry standards.
• Collaborate with procurement and legal teams to ensure compliance with government procurement policies and procedures.
• Provide support for any system security review and audit activities and implement follow-up actions recommended by auditors/consultants to maintain and enhance the security of the systems.

Performance Monitoring and Optimization:

• Monitor and manage capacity utilisation and performance of Cloud compute resources, virtual appliances and services to identify opportunities for optimisation.
• Implement strategies to improve efficiency, reduce downtime, and enhance overall system performance.
• Proactively address issues and implement solutions to mitigate risks and ensure uninterrupted service delivery.

Vendor Management:

• Liaise with cloud service provider and vendors to manage service level agreements (SLAs), and vendor relationships.
• Work with vendors to assess, plan, co-ordinate and implement the appropriate technology changes, updates and refresh when products are reaching end-of-life.

Requirements:

• Bachelor's degree in Computer Science, Information Technology, or a related field.
• Minimum 3-4 years of experience in managing IT operations for cloud environment.
• Proven experience in managing cloud-based infrastructure, preferably in a government or regulated environment.
• Strong understanding of cloud technologies, such as Amazon Web Services (AWS), Microsoft Azure, or Google Cloud Platform (GCP).
• Good knowledge of government regulations, compliance standards (e.g. ICT&SS Management, Digital Service Standards), and security frameworks.
• Experience working with teams in a fast-paced and dynamic environment.
• Excellent communication skills with the ability to effectively collaborate with cross-functional teams and stakeholders.
• Strong analytical and problem-solving skills with a focus on continuous improvement and innovation.

Additional Information:

This position may require security clearance and adherence to strict confidentiality protocols due to the sensitive nature of government data and operations. Flexibility in working hours and occasional travel may be required to support system maintenance, upgrades, or emergencies.

Job Description & Requirements

• Liaise with Clients, Consultants, and Authorities for management of the project
• Must have the experience in Diaphragm wall and pilling
• Perform Civil/Structure engineering design works
• Responsible for on-site technical / engineering / administrative matters
• Involve in project planning, implementation, and close monitoring of projects
• Determine best materials and methods with Professional Engineers
• Liaise with Architects on design and safety of the structure
• Analysis of structural components with engineering software
• Prepare drawings, specifications, and computer models of the structure
• Ad-hoc duties as assigned by the Senior Engineer

Requirements:

• Candidate must possess at least Degree in Civil/Structural Engineering
• Minimum 10 years of LTA experience required
• Required Skill(s): Good communication and interpersonal skills, ability to liaise with all levels of people
• Relevant experience in the design of Buildings, Civil and Infrastructure works
• Preferably with project site co-ordination experience
• Knowledge of engineering software and MS Office

Our company was incorporated in 2013. Our main business is providing builder works and lift mechanical and electrical (M&E) works.

Job Responsibilities

• Provide troubleshooting L2 support and response on application incidents.
• Log, escalate and follow through with issues, ensuring that issues are resolved.
• Review and improve our incident management process.
• Periodic reviews and submission of the capacity needs of the business.
• Support and/or drive disaster recovery response drills.
• Deploy new versions of the software.
• Generate reports on the operational workloads, review capacity needs of the business, support and/or drive disaster recovery response drills.

Requirements

• Diploma/Bachelor's Degree in Computer Science or other related discipline.
• 2-5 years of Technical/Application Support experience on various technology platforms.
• Knowledge in Site Reliability Engineering (SRE) or working with SRE team is a plus.
• Knowledge in scripting (Python/SQL/Bash) is a plus.
• Responsible and proactive approach to resolving problems, and have a structured approach to problem-solving.

Just imagine your future with us…

At Aurecon we see the future through a very different lens. Do you?

Innovation, eminence and digital are at the heart of everything we do. Are you excited about the future?

Are you driven by the opportunity to work on some of the most challenging and complex projects around the world and to learn from the best? We are.

Diversity is at the core of everything we do. We work together to create a culture based on respect, trust and inclusiveness. Our differences are what fuel our creativity.

What will you do?

In this position you will join our Singapore Buildings business, where you will play an integral part in a team of highly skilled specialists that ‘bring ideas to life’ for our clients across all types of building and infrastructure projects.

We know the work we do is vital in assisting our world’s economic development and, it’s the technical expertise and the depth of knowledge of our people that really sets us apart. Here are the key things you will do to ‘bring ideas to life’.

• Taking responsibility for projects from initial design, through to construction and final review.
• Working in collaboration with other design disciplines, locally and regionally to ensure the integrity of the overall design.
• Managing projects or project components, budgets, schedules, quality assurance and client feedback and ensuring effective communication of any changes/modifications.
• Assisting in workload management and resource forecasting and involved in preparation of proposal documentation.
• Reviewing and ensuring compliance, including drawings, reports, specifications, survey, access, and preparation of appraisals.
• Building and maintaining effective relationships with clients, recognizing, and developing potential business opportunities.

We know today’s complex challenges can only be solved through bringing together diverse teams of people from across our business, so there will be opportunities for you to apply your skills and creativity to projects in other geographies and markets.

What can you bring to the team?

Firstly, you will share our genuine passion for re-imagining engineering and be someone that actively pursues continuous learning to help shape the future. You will also need the following:

• A Bachelor’s Degree in Mechanical Engineering, with at least 10 to 12 years’ relevant experience in Buildings Mechanical Design and commissioning of M&E systems in modern commercial and industrial buildings. Data Centre Experience will be preferred.
• Strong project management skills with ability to lead project team members on technical delivery. Excellent presentation, verbal, and written communication skills.
• Sufficient experience to demonstrate intermediate to advanced knowledge of relevant engineering codes, standards, and practices.
• Organised approach and ability to accept increased responsibility and produce accurate and detailed work.
• High level of computer literacy and exposure to BIM / Revit will be highly desired, with advanced problem-solving skills through investigation and analysis.

Our Aurecon Attributes define our way of being – they are a collection of qualities that makes us who we are. Individually and collectively, they unleash the true power of Aurecon, they make us stand out from the crowd and are critical to our success. We don’t expect you to have all eight of the attributes, but one that is unique to you. To find out what your key attribute is, take the test here.

We value that each of our team members brings something different to Aurecon. We look for people who have had a broad range of experiences throughout their career and can demonstrate how they have worked as part of a team to bring ideas to life. Does that sound like you?

About Us

Headquartered in Australia, Aurecon is one of the leading international engineering, design and advisory company that brings vital engineering experience, technical capabilities, and design expertise to an extensive range of markets.

Over the last 85 years, our team of more than 5,000 experts located in 11 locations across the globe have collaborated with our clients and partners to reimagine, shape and engineer clever, innovative and sustainable solutions to solve some of the world’s most complex challenges.

In Asia, where the region is undergoing rapid transformation in areas of sustainability, digital and infrastructure, we lead by being innovative, flexible and nimble. We embrace design-led thinking – an approach that is guided by digital engineering, the user experience and sustainability – ensuring that the work we do is future ready and leaves a legacy for the next generation.

Think engineering. Think again.

Want to know more?

You can learn more about what it’s like to work at Aurecon by visiting the careers section of our website.

If you are intrigued or excited by what you have read, then we want to hear from you. Apply now!

Job Description:
We are seeking an experienced AI Chip DFT (Design for Test) Engineer to join our team. This role involves the design and implementation of test architectures for AI chip designs, ensuring efficient and reliable testing processes. The ideal candidate will be responsible for integrating DFT circuits, performing simulations, developing test vectors, and supporting yield improvement and fault analysis.

Key Responsibilities:

• DFT Architecture Design: Lead the design of DFT architecture at the chip level, implementing testing circuits such as Scan, Mbit, Memory repair, and Bscan.
• DFT Circuit Design and Insertion: Implement DFT circuits and integrate them into the chip, ensuring proper timing constraints for DFT mode convergence.
• Functional Verification: Perform functional verification, pre-simulation, post-simulation, and power simulation of DFT circuits. Troubleshoot and resolve any issues encountered during testing.
• Test Vector Development: Develop high-coverage, low-cost test vectors and validate them through simulation and timing analysis.
• Yield Improvement and Fault Analysis: Contribute to yield improvement efforts and fault analysis. Assist with testing SDC (Synopsys Design Constraints) constraint files in testing modes and help with timing and power convergence in the backend.

Qualifications:

• Educational Background: Bachelor’s degree in Electronics Engineering, Computer Science, or a related field. Advanced degrees (Master’s or Ph.D.) are a plus.
• Professional Experience: Minimum of 4-5 years of experience in DFT, with expertise in chip-level DFT architecture design, circuit insertion, and testing.
• Technical Skills:
  • Proficiency in DFT methodologies, including Scan, Mbit, Memory repair, and Bscan.
  • Strong experience with functional verification and simulations (pre/post, power simulation).
  • Ability to develop efficient test vectors and perform timing and simulation analysis.
  • Familiarity with yield improvement and fault analysis processes.
• Tools & Scripting: Experience with DFT tools and scripting languages (e.g., TCL, Perl, Python).

Soft Skills: Strong problem-solving skills, attention to detail, and the ability to collaborate effectively with cross-functional teams.

Job Description

• Prepare detailed design reports, calculations, and drawings.
• Participate in preparing tender documentations.
• Prepare submissions to statutory agencies/ authorities.
• Coordination with external consultant teams, architects, contractors, and client to resolve project issues.

Requirements:

• Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).
• Conversant with local codes and authority submission procedures
• Excellent interpersonal, good written and verbal communication skills
• Have good knowledge of engineering design software such as Etabs, Prokon, SAFE, Plaxis etc.
• Minimum 3 years working experience in SINGAPORE.

Job ID: 19206

• Location: Mattar
• Working hours: 8.30am – 5.30pm
• Salary: up to $4,500 (Depending on experiences), Car allowances will be provided

Job Description

• Manage and oversee the entire sales cycle, including customer meetings, quotation submission, sales order processing, and delivery follow-up.
• Provide advanced technical solutions and support to customers.
• Prospect and develop new accounts while maintaining and expanding relationships with existing accounts.
• Develop and implement strategies to achieve the company’s overall sales and marketing objectives.
• Mentor and guide junior sales engineers, providing training and/or support as needed.
• Collaborate with cross-functional teams to ensure customer satisfaction and address any technical or logistical challenges.
• Analyze market trends and customer feedback to identify opportunities for product and service improvements.

Job Requirement

• Diploma or Degree in Mechanical, Mechatronics, Electrical, Electronics, or a related field.
• Possess own car
• Minimum of 5-7 years of sales experience, with a proven track record in a technical sales role
• Strong leadership qualities and experience in mentoring or leading a sales team.
• Aggressive, result-oriented, and self-motivated.
• Excellent interpersonal, presentation, and communication skills.
• Ability to work independently as well as part of a team.
• Ability to understand and communicate complex technical solutions.
• Proven ability to meet and exceed sales targets and goals.
• Strong problem-solving skills and the ability to handle challenging customer situations.
• Experience in a senior sales or sales engineering role within factory automation and/or semiconductor will be advantage.

Interested applicants, kindly send your updated resume to Joanne (R21101135) [email protected] with the email subject header "Job Application for 19206, Senior Sales Engineer".

Only shortlisted candidates will be notified, other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Pasona Singapore Pte Ltd

Joanne Yeo Min Qian
EA License No:90C4069

Registration No.: R21101135

Job Description

• Build and maintain strong relationships with existing clients to ensure long-term satisfaction and repeat business.
• Identify new sales opportunities and upsell additional aftermarket products, services, and solutions to existing customers.
• Act as a liaison between the customer and the company’s engineering or technical teams for problem resolution.
• Prepare and submit quotations, service proposals based on customer requirements.
• Coordinate on after-sales market support in term of maintenance schedule arrangement to check on the system performance.
• Provide regular sales reports to management.

Job Requirement

• Good interpersonal and communication skill
• Strong sales and negotiation skills
• Prefer one from heavy machine or compressor industry
• Customer service oriented
• Have relevant market and industry knowledge

AngelineMah

Reg No: R2096146

One Vogue Pte Ltd

EA License: 19C9629

Working Hours: Mon-Fri 7:30am -5pm

Location: West

(A) Key Functions and Responsibilities

1. Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
2. Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
3. Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
4. Work with HR Department and assure that employee grievances are addressed in a timely fashion.
5. Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
6. Maintain and ensure work safety and practices. Also continually improve safety record by addressing both physical safety issues and employee safety attitudes.
7. Maintain and improve housekeeping in all areas.
8. Evaluate, Train and Maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
9. Ensure on time submission of overtime record to HR Dept for computation of monthly salary.
10. Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
11. Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
12. Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
13. Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
14. Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
15. Assist in hiring of production personnel.
16. Maintain and update operating manuals for all the manufacturing equipment and facilities.
17. Maintain and update operating training manuals for all manufacturing processes.
18. Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

(B) Skill/Experience

1. Minimum 5 years working experience in manufacturing environment.
2. Able to supervise and lead the subordinates.
3. Willing to work after working hour or during non-working days.
4. Able to work under pressure.
5. Computer literate.
6. Knowledge in ISO is an advantage.

(C) Education

1. Diploma or Degree in Manufacturing / Electrical /Mechanical / Engineering discipline.

Compensation & Benefits

• Annual Increment
• Performance Incentive Bonus
• Career Progression

For quick reply, please contact me at +65 85878287

Registration Number: R21100938 (Tan Jie Bei)

EA Licence No: 22C1301 (Unisearch Services Pte Ltd)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

IT Infrastructure Support:

• Provide Level 1 technical support to end user, including software & network problem
• Deployment of new computer, including installation of software to end user
• Create & maintain end user account (AD & Email)
• Co-ordinate with external vendor for support
• Involve with infrastructure project & setting up new site office
• Responsible for new staff orientation briefing
• Provide onsite support to end user.
• Ad-Hoc duties/task as per assigned

General:

• Create and maintain documentation on technical problem.
• Procurement of IT hardware and software
• Update & maintain IT inventory
• Disposal of IT hardware

Requirements:

• Nitec / Higher Nitec / Diploma / Advanced Diploma in IT
• Min. 2 years of experience or relevant working experience. Preferable with desktop support experience
• Basic Active Directory, Networking & MS365 skill. Candidate with Server, Hyper-V & Firewall knowledge is a plus point
• Good Knowledge on Microsoft Product
• Travel to various location around Singapore
• Able to work independent & multitask

Software Engineer (SAP Specialist)

Responsibilities:

• Provide SAP Techno-functional Support in FI/CO or SD/MM/PM modules.
• Involve in analysis, design, coding / configuration and testing of SAP System.
• Work with business users to understand their business requirements
• Develop interfaces between SAP with external systems.
• Analyse the software issues, diagnoses the technical faults and suggest the precaution measures along with accurate troubleshooting methodologies
• Ensure safety practices and housekeeping is to be maintained to the highest standard

Requirements:

• Possess a Diploma/Degree in Computer Science / Information Technology or equivalent
• Knowledgeable in SAP and programming languages such as ABAP.
• Good interpersonal, analytical and problem-solving skills
• Minimum 2-3 years of relevant working experience is required

Job Description:

• Expand customer base and business opportunity
• Prepare sales reports, project monitoring, and other ad-hoc duties as assigned
• Liaising with various suppliers and customers
• Working towards the company's overall sales and marketing plan

Job Requirements:

• Diploma / Degree in Mechanical / Electrical / Engineering field
• Willing to travel to various Asian countries for sales promotion
• Technical and Sales knowledge
• Team player and self-motivated
• Well-versed in MS Word, Excel, and PowerPoint
• Good interpersonal and communication skills
• Able to multitask
• Experienced or fresher is welcomed, training will be provided
• Hindi/Tamil language skills to liaise with Indian Hindi/Tamil speaking clients

HOW TO APPLY:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Experience required;

- Minimum 5 years of working experience on civil engineering projects with Main contractor experience preferred

- Experience in government agency’s tender (LTA, PUB, JTC etc)

- Be meticulous, independent, highly motivated, result-oriented and a good team player

- Be able to work under pressure and meet tight deadlines

- Sound knowledge of construction and excellent negotiating and interpersonal skills.

- Sound computer literacy for MS office.

- quantity taking offs, estimation, cost planning, sourcing sub-contractors

- Preparation of cost comparison analysis, negotiations with sub-contractors

- Preparation of tender submissions as required

- Getting involved in post-tender submission activities

- Updating repository for historical data after tender submission

Other quantity surveying related duties

-Have experience of Tunnel Projects will be a plus

-Degree/Diploma in Quantity Surveying/Building or equipment

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Lead development of new process to recycle and reuse metal scraps.
• Research and develop process of upcycling metal scraps (titanium/aluminum alloy).
• Research recycling of 3DP metal powders and reduction of raw material cost.
• Provide development plan and risk mitigation for projects to management.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new material or new technology development.

Requirements:

• Masters / PhD in Materials Science, Metal Material Engineering or Analytical Chemistry.
• 2 years of relevant R&D working experience preferred.
• Have experience in metal material development and qualification in either mold, fixture or product.
• Possess knowledge in material characterization and metal powder production process.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Design and build data pipelines infrastructure to collect, process and store data from various sources.
• Develop data assets platform to provide a centralized repository for managing and accessing data assets.
• Implement automated SQL queries based on user-defined criteria or business requirements.
• Use techniques like query templates, metadata-driven generation, or machine learning algorithms to generate SQL queries.
• Create new IPs in Singapore in area of expertise.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new technology development.

Requirements:

• Degree / Masters / PhD in Computer Science, Data Science, Statistics Applied Sciences or related field.
• Proficiency in Python, SQL, Java or Scala programming languages.
• Understand data warehousing concepts, ETL (Extract, Transform, Load) processes and tools like Informatica, Talend, or Airflow.
• Knowledge of relational databases (MySQL, PostgreSQL, Oracle) and NoSQL databases (MongoDB, Cassandra).
• Familiar with Apache Airflow, Kubernetes or Ansible for automating data pipelines and infrastructure.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628