POSITION SUMMARY:

This position is to perform a wide variety of electronic, electro-mechanical, mechanical or measurement product assembly operations on product components, assemblies or sub-assemblies, products, or systems. To determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering, cables harnessing, welding and fitting on assembly units. To makes setups and adjustments holding tolerances to blueprint specifications.

ESSENTIAL FUNCTIONS:

These may include, but are not limited to:

· Perform assembly work.

· Handle and sort materials.

· Pack & Unpack of goods

· Assist technicians / engineers / managers in the production floor.

· Ability to read and understand work instructions.

· Ad-hoc duties when assigned.

EDUCATION, EXPERIENCE, SKILLS AND ABILITIES REQUIRED:

Education: (Identify the minimum education required to perform the essential functions of this position).

· At least SPM or equivalent

Experience: (Indicate the minimum years of applicable and relevant work experience that would be necessary to effectively perform in this position).

· Min 8 years of working experience in Electronic Industry experience preferred.

Knowledge, Skills & Abilities: (List other skills, abilities, or special licenses needed to perform the job (software, professional certifications, drivers’ license, languages, etc.)

• Ability to read, write and communicate in basic EnglishDemonstrate knowledge of safety in manufacturing environment.
• Good in 5s housekeeping habits.
• Self-starter and able to perform tasks with minimum supervision.

Controls and Instrumentation, Equipment Maintenance, Manufacturing Experience, Manufacturing Quality, Mechanical Inspection Tools, Tooling, Safety Management, Quality Focus, Power Tools, Judgment, Decision Making

TECHNICAL KNOWLEDGE:

Equipment: PC, scanners, facsimile machine, voice mail and e-mail systems, and common office machines or ability to be trained.

Software Knowledge: Windows, MS Office (Word, Excel, Access, PowerPoint) an advantage, familiarity with HRIS systems is preferred

EFFORT REQUIRED:

Physical Activities: On a continuous basis, sit at desk for a long period of time; write or use a keyboard to communicate through written means. Intermittently answer telephone. Some walking and lifting up to 10 kg may be required. The noise level in the work environment is usually moderate. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

TRAVEL:

5 to 15% travel required

PERSONAL CHARACTERISTICS:

As the Company is poised to move to its next level, it is imperative that he or she be first and foremost a team player. The incumbent will also possess many critical personal characteristics, including:

Excellent Communication Skills, both written and oral: The incumbent’s communication style should be diplomatic and direct, but not confrontational. He or she must be able to articulate clear, tangible objectives for the organization, negotiate agreements where each party benefits, and can deliver an honest assessment of the level of achievement of those goals. Must work well in a collaborative team environment.

Accountability: Incumbent must be able to quickly energize the organization and to focus it throughout its future growth stages. He or she should be a self motivated, results oriented team player who leads by example, holds him or herself accountable for performance, takes absolute ownership, and champions all aspects of the programs.

Indomitable Work and Teamwork Ethic: Incumbent will reject setbacks and will enthusiastically persevere until ambitious goals are achieved, both personally and from a team perspective. He or she will be resourceful and innovative at tackling multiple moderate assembly challenges in support of

production related projects.

Entrepreneurship, sense of urgency: Incumbent will possess a high energy level, which allows them to react to situations quickly and decisively, possessing self confidence to be assertive when taking a position, not being afraid to make decisions.

Image and Presence: Incumbent will have had significant exposure to assembly function and understand the importance of maintaining a high level of integrity. As such, he or she must project the appropriate professional image of the Company.

Multitasking Capability: Incumbent will have had previous experience in assembly function including, but not limited to, small entrepreneurial organizations.

The Climate Transformation Programme (CTP) aims to develop, inspire and accelerate knowledge-based solutions and educate future leaders to establish the stable climate and environment necessary for resilient, just, and sustainable Southeast Asian societies. CTP will generate knowledge and innovation across disciplines including climate and Earth science, ecology, materials science, artificial intelligence, humanities, social sciences, the arts, finance, health, and engineering. It will also translate state-of-the-art scientific results into real world solutions for Singapore and transfer these solutions to Southeast Asia (SEA) and beyond. As part of this programme, Cross Cutting Theme 2: Satellite Remote Sensing will map and monitor the impact and solutions of climate change in Southeast Asia region.

The Earth Observatory of Singapore – Remote Sensing Lab (EOS-RS) at Nanyang Technological University in Singapore invites applications for a Research Fellow / Scientist / Engineer to support CTP Cross Cutting Theme 2 (Satellite Remote Sensing). The EOS-RS teams’ research covers SAR, multi/hyper-spectral remote sensing, LiDAR, and GNSS data for disaster response and hazard monitoring for earthquakes, volcanoes, and impacts of climate change.

EOS is a University Research Institute at Nanyang Technological University that conducts fundamental research on earthquakes, volcanic eruptions, tsunamis, and climate change in and around Southeast Asia, towards safer and more sustainable societies. For more information on EOS please visit http://www.earthobservatory.sg.

EOS-RS and CTP welcomes applications from qualified candidates who have interests and expertise relevant to the use of remote sensing for mapping, monitoring, and understanding the causes and effects of climate change. We are particularly interested in candidates who have expertise in analysing and interpreting satellite remote sensing data from Synthetic Aperture Radar (SAR) and multi/hyper-spectral sensors for measuring ground deformation, mapping surface changes due to disaster events, and mapping ocean colours and ocean topography for carbon flux estimates. We are also interested in candidates who have experience applying machine learning to InSAR and other remote sensing observations.

Successful candidates will have a Master’s/PhD in a relevant field (e.g., earth science, electrical engineering, image processing, and deep learning), expertise in processing and modelling geodetic data using open-source analysis tools, an ability to apply AI/ML techniques to remote sensing data; and demonstrated track record of impactful research or projects in topics related to the position. They will also have strong English and communication skills, the ability to write code using Python or MATLAB, the desire and ability to work as part of a multicultural team, and a demonstrated ability for creating intellectual value.

Additionally, the successful candidate will be part of the large and interdisciplinary research teams at EOS, the Asian School of the Environment (ASE), and the School of Electrical and Electronic Engineering (EEE), helping to develop algorithms and systems for disaster mapping and climate change in collaboration with space industries and responding agencies around the world. They will collaborate with the geodesy group and many other groups at EOS/ASE.

Key Responsibilities:

• Architect and develop InSAR-based remote-sensing solutions and capabilities grounded in current research to address needs of scientists and external stakeholders
• Coordinate and manage application development and experimentation efforts across projects and synergies
• Conduct feature experimentation and develop applications both independently and in a team
• Help to mentor Research Assistants/Associates

Job Requirements:

• Master’s/PhD in Earth science, geophysics, geodesy, physics, electrical engineering, natural hazards, computer science, machine learning, or a related field.
• Demonstrated expertise in processing SAR data (with open-source tools such as ISCE or GMTSAR) for surface deformation measurement and change mapping.
• Strong technical skills in data processing for remote sensing applications; experience in optimizing and implementing automated processing pipelines (in cloud, HPC environments) for multi-modal, large remote-sensing datasets for machine and deep learning desired.
• Evidence of the ability to write and present at the level required for peer-reviewed scientific journals and international conferences, which will usually be in English.
• Evidence of independence in research direction and team spirit.

Interested applicants should submit a CV, list of publications, research statement, diversity and inclusivity statement, and the names and contact information for three referees. For additional information please email Assoc. Prof. Sang-Ho Yun at [email protected]. Applications will be reviewed on an ongoing basis.

EOS seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status, family responsibilities, or disability.

We regret to inform that only shortlisted candidates will be notified.

The incumbent will provide day-to-day technical support for the production line including cleanroom, sub-assembly, optical build, and laser final test areas. To maintain the quality, reliability and cycle time standards of the laser build process and implenet corrective actoins for problems reported.

Requirements:

• A bachelor's degree in engineering or its equivalents
• At least 3-5 years of relevant work experience in Photonics or related maufacturing field
• Technical expertise pertaining to manufacturing, assembly & test processes for mechanical assemblies, PCBA and optical components

Interested candidates, please forward your most updated resume to [email protected]

• Well established Company
• Basic $3000 - $ 4500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tekong Island
• No experience welcome as training will be provided

Job Responsibilities:

• Pre-plan and prepare construction schedule, and coordinate activities.
• Follow up and report On-site and Off-site project management and progress.
• To prepare and submit progress reports as required by consultants and clients.
• Analyse project specifications, including civil/structural, architectural, and M&E drawings.
• Conduct thorough monitoring of construction work activities and prepare daily, weekly, and monthly safety meeting, site works and site reports.
• Coordinate, prepare and arrange site inspection with RE & RTO.
• Arrange daily Toolbox Meeting with Site Supervisor and WSHC and briefing on site activities and daily task. Arrange Site daily activities with Site Supervisor.
• Prepare necessary submission for project. Example, RFI, MS, RA, SWP, shop drawings and supporting documents preparation.
• To prepare and keep records, summary related to project. Maintain Project documents control for ISO purpose.
• Other ad hoc duties as assigned.

Requirements:

• Possess Bachelor Degree in Civil Engineering.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG JYA YEE (R23119014)
EA Recruitment Pte Ltd
EA License No: 21C0492

· Development experience with a scripting language (such as Shell Scripting or Python)

· A grounded understanding of Git branching, merging, and pull requests

· Hands-on experience with one or more of the following DevOps toolchains (or equivalent): o Jenkins, Git, Artifactory, Docker, Ansible, SonarQube

· Experience with IaaS or PaaS systems such as: o AWS, Google Cloud, Azure Cloud Foundry, OpenShift/Kubernetes, OpenStack

· Fundamental understanding of networking, firewalls, load balancing, forward and reverse proxies

Familiarity with concepts such as: Agile methodologies, Test-Driven Design, Behavioural-Driven Design, and 12 factor application design

If you're interested in this role, please email your latest CV to [email protected]

Other than that you can click 'apply now' to forward an up-to-date copy of your CV.

If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career.

EA License Number: 20C0199 | Company Registration No: 201913897K

Electrical and Control Design Engineer

• Working day: Monday – Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,200 - $5,800
• Location: Woodlands

Key Responsibilities:

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirements:

• Bachelor's Degree in Electrical and / or Electronics Engineering.
• Min 3 Years of relevant experience.
• Added advantage but not mandatory: programing skill of PLC (Beckhoff preferred), motion controllers, robots and touch panels.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description:

We are seeking an experienced Engineer to join our Industrial Automation & Digitalization team. The ideal candidate will be responsible for the design and development of industrial automation control systems, ensuring high-quality project execution and client satisfaction.

Key Responsibilities

• Development and programming of PLC, SCADA, and HMI systems (preferably with Siemens, Rockwell, Wonderware/AVEVA).
• Experience in design and development of control panel and Electrical architectures.
• Conduct Hardware and Software Factory Acceptance Tests (FAT).
• Perform testing, commissioning, and Site Acceptance Tests (SAT) at client locations.
• Provide technical support to the Sales team during project bidding.
• Offer onsite and remote technical support and services.
• Ensure overall quality control of all project deliverables.
• Collaborate effectively with team members and clients.
• Travel within Singapore internationally including offshore Oil & Gas facility as needed for project implementation and meetings.

Requirements:

• 3-6 years of hands-on experience in industrial automation & digitalization.
• Proficient in various communication protocols used in the automation industry.
• Strong knowledge of automation technologies specific to Pharma, Oil & Gas industries is an advantage.
• Strong verbal and written communication skills.
• Team player with a flexible approach to work and problem-solving and engage with other project team members in Singapore and overseas.
• Diploma or Degree in Electrical, Electronic, Computer, Mechatronic Engineering, or equivalent.
• A willingness to learn and a growth mindset.

If you are passionate about industrial automation and meet the qualifications, we encourage you to apply and become a part of our dynamic team!

Key Responsibilities:

• Collaborate with the Facilities Manager to engage with clients regarding all operational tasks and projects.
• Supervise and ensure that maintenance programs and rectification tasks are efficiently managed by a team of technical officers and technicians.
• Oversee and coordinate maintenance activities for various Air Conditioning and Mechanical Ventilation (ACMV) systems, including chiller systems, chilled water systems, direct expansion (DX) systems, mechanical ventilation systems, clean room systems, and building management systems.
• Develop comprehensive plans for the installation, maintenance, and operation of ACMV systems.
• Provide guidance and lead technical investigations for rectification works, ensuring effective resolution of issues.
• Ensure daily air conditioning thermal comfort levels are maintained within acceptable limits according to established codes of practice.
• Monitor and report on maintenance work progress, follow up on action items, and maintain thorough maintenance checklists and schedules.
• Innovate and implement improvements to operational processes aimed at enhancing efficiency and promoting energy conservation.
• Work collaboratively with owners, users, consultants, vendors, and contractors to provide feasible solutions that meet engineering functional requirements and ensure project objectives are achieved.
• Conduct regular inspections of existing air-conditioning systems to verify that all maintenance programs are effectively implemented in strict adherence to guidelines and Provide technical specifications for ACMV system upgrades or renovation projects as needed.
• Stay informed about local codes of practice, including ASHRAE standards, to ensure compliance in all operations.
• Ensure that all work is carried out safely and in accordance with established safety procedures.
• Coordinate with contractors for rectification and ad-hoc works, ensuring that all tasks are executed efficiently.
• Investigate, analyze, and determine root causes of breakdowns and faults, reporting findings effectively.
• Prepare detailed technical reports and proposals regarding breakdowns and maintenance activities.

Education and Experience:

• Bachelor’s degree in Mechanical Engineering or an equivalent engineering discipline (mechanical, electrical, or industrial).
• Minimum of 3 years of hands-on experience in ACMV (Air Conditioning and Mechanical Ventilation) systems, facilities management, or project management.
• Proficient in guiding and troubleshooting ACMV faults, with a solid understanding of construction principles and building processes.
• Thorough understanding of building regulations and health and safety protocols.
• Exceptional communication skills with the ability to collaborate effectively with non-engineering team members.
• Detail-oriented, self-motivated, disciplined, and well-organized, with a strong safety mindset and a commitment to exemplary workplace safety and health (WSH) practices.
• Strong analytical and problem-solving abilities, capable of troubleshooting on-site issues effectively.
• Familiarity with project management principles and practices.

Your Team, Your Impact

Marvell is empowering the global data economy. Whether at the network core or edge, our leadership technologies make it possible for the world’s data to be processed, moved, stored and secured faster and more reliably. With leading intellectual property and deep system-level knowledge, Marvell's infrastructure semiconductor solutions are transforming the 5G, cloud computing, enterprise and automotive markets of tomorrow.

What You Can Expect

• Support new product introduction initial phase to validate new device features and test/DFT methodologies.
• Perform new device characterization, circuit sensitivity analysis, interpret findings & support root-cause investigations.
• Perform data mining and statistical data analysis on wafer sort and final test parametric to support initial product assessment.
• Support product assessment report generation.
• Perform functional testing and analysis to ensure product operation and reliability.
• Support & resolve Test engineering & program related issues.
• Support volume Engineering sample supply for early customer engagement.
• Plan and coordinate (data analysis, debug, root-cause, implementing solutions) yield & test time improvement activities to meet the set mass production release goals.
• Provide customer return verification support including implement containment & preventive actions
• Execute and implement test productivity activities which include test time reduction, retest reduction, test insertion removal, higher parallelism
• Transfer product knowledge to sustaining engineer
• Engage & manage Test Subcon in early production stage

What We're Looking For

• Bachelor’s degree in Computer Science, Electrical Engineering or related fields and 5-10 years of related professional experience.
• Master’s degree and/or PhD in Computer Science, Electrical Engineering or related fields with 3-5 years of experience.

The Assistant Chief Engineer is responsible to assist the Chief Engineer in the operation and maintenance of the building, to ensure a high standard of upkeep and maintenance, to the satisfaction of the building owner and guests / tenants.

Responsibilities:

• To assist the Chief Engineer to implement the execution of preventive maintenance and repair schedules of all machinery, equipment and facilities and see to the proper execution by employee staff or external agencies or contractors.
• To assist the Chief Engineer to prepare the duty roster of maintenance staff.
• To conduct daily briefing of staff and assign duties to staff to carry out the necessary building operation and engineering works.
• To assist the Chief Engineer in the execution of administrative duties such as inventory management, record keeping of engineering work / repair, etc.
• To assist the Chief Engineer to ensure good housekeeping standard of the engineering workshop and that all safety procedures and rules are adhered to.
• To assist the Chief Engineer to obtain quotations for all the necessary works by external agencies / contractors and for all necessary purchases from suppliers.
• To contribute towards cost management of the department and ensure that there are no wastage, negligence or dishonesty.
• To assist Chief Engineer in profits and losses costing and planning.
• To ensure that the staff in the department provides a high standard of engineering services which meets the expectations of the building owner / tenants / guests / shoppers
• In conjunction with the Chief Engineer, to ensure that that the maintenance staffs are adequately deployed and that they are properly trained to discharge their roles.
• Mentor, coach & orientate new as well as existing staff in their roles & responsibilities towards the department goals
• In conjunction with the Chief Engineer, to assist the maintenance staff retention and to take appropriate measure in furtherance of staff stability.
• To ensure that effective fire safety, work place safety practices and enforcement of local Health & Safety regulations are met.
• Ensure to assist department to comply all authorities' requirement
• To ensure that Hotel management is satisfied with the quality of services rendered by the Engineering department.
• To ensure that the Hotels guests receive an adequate level of engineering services that satisfies their concerns and needs.

Job Requirements:

• Candidate must possess a Polytechnic Diploma in Electrical, Mechanical or Building Services or equivalent. Preferably with Engineering Degree.
• Preferably with minimum 3 years or more of experience in Engineering management in similar capacity
• Able to deal with suppliers / contractors / government bodies
• Able to manage various projects at any point of time.
• Exposure to purchasing, cost control beneficial
• Able to use Microsoft Word, Excel of computer for preparing reports
• Sound Knowledge of Hotel Engineering and Management
• Sound knowledge in Mechanical / Electrical / Building Engineering
• Possess skills in maintaining, troubleshooting and repairing of building equipment
• Good communication skills (verbal and written), able to resolve any conflicts.
• Good coaching skill, ability to lead the junior maintenance staff.
• Willingness to learn and work as a team member
• Possess high level of integrity and respect for others
• Able to withstand huge pressure and stress towards work
• Outgoing personality
• Responsible to his work, hardworking, good initiative with cost saving in mind
• Self-confident, self esteem
• Good problem solving skills necessary
• Able to put in long hours when required and 24 hours standby for any technical problem occurring
• No criminal record
• No external commitment that clash with work

Job Responsibilities:

• Prepare import/export documents
• Coordinate with vendors/customers for delivery arrangements
• Work with logistics partners to ensure timely and accurate shipments
• Ensure shipment documents comply with customs regulations
• Ensure timely invoicing of shipments as per company KPIs
• Maintain accurate and up-to-date shipping records
• Monitor production schedules and release work orders to meet shipment deadlines
• Prepare and review quotes based on customer requests
• Review contracts to ensure consistency with quotes
• Support purchase order generation, order confirmation, and delivery

Requirements:

• Minimum GCE O level
• Minimum of 1 years of work experience as Administrator
• Preferred with knowledge of SAP
• Must be detail-oriented and strong organizational skills
• Competence with Microsoft Office
• Good personality and able to handle customer queries

We are looking for Cloud Security Lead to pioneer in developing, implementing, and managing cloud security solutions to safeguard the organization's data and infrastructure. This role entails collaborating with cross-functional teams to ensure secure cloud environments while addressing emerging security challenges.

Details

• Working location: Central
• Working hour: 9am to 6pm / 10am to 7pm (Flexible arrangement), hybrid work arrangement
• Salary package: Up to 13K + AWS + Attractive Bonus Scheme
• Others benefits: Group insurance, above industries standard leave benefits, good employee welfare, annual dinners, cruise events, overseas trip, learning & development etc.

Responsibilities:

• Develop and execute cloud security strategies and roadmaps, provide leadership and direction to the cloud security team, aligning efforts with organizational objectives.
• Promote security best practices and foster a culture of security awareness across the organization.
• Design and deploy secure cloud architectures and solutions, evaluate and recommend security tools and technologies to enhance cloud security.
• Develop and manage IAM strategies to ensure secure and compliant access to cloud resources.
• Implement and enforce IAM policies, procedures, and controls for managing identities, roles, and permissions.
• Establish, enforce, and monitor cloud security policies and procedures.
• Ensure adherence to industry standards, regulations, and best practices (e.g., GDPR, HIPAA, NIST).
• Conduct regular security audits and risk assessments to identify and mitigate potential risks.
• Lead incident response efforts for cloud security incidents.
• Conduct root cause analysis and implement corrective actions to prevent future incidents.
• Partner with DevOps, IT, and development teams to integrate security into all stages of the software development lifecycle (SDLC).
• Collaborate with external vendors and partners to ensure robust security solutions.
• Regularly analyze security logs, alerts, and reports to detect and respond to threats.
• Prepare and present security metrics and reports to senior management.

Requirements

• Min 7years of experience in cloud security, with expertise in AWS, Azure, or Google Cloud Platform and min 2years in lead position.
• Strong understanding of cloud security & cloud infrastructure architectures, frameworks, and best practices.
• Relevant certifications such as OSCP, CISSP, CCSP, or AWS Certified Security – Specialty is a plus point.
• Knowledge of container security, Kubernetes, and microservices architecture.
• Hands-on experience with cloud security tools and services (e.g., AWS Security Hub, Azure Security Center).
• Proficient in security technologies such as IAM, encryption, SIEM, IDS/IPS, and vulnerability management.
• Familiarity with regulatory and compliance frameworks (e.g., ISO 27001, SOC 2).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

• Low Yong Wei (Wyman) - R1550983
• ScienTec Consulting Pte Ltd - 11C5781

Job Description

• Day-to-day supervision on site
• Coordination and monitoring of progress amongst various subcontracting works
• Proficiency in CAD software, checking drawing discrepancies, coordinating with client’s representatives, consultants and sub-contractors on technical matters
• Attend meetings, inspections, liaison with QP's, government body and clients
• Responsible for the upkeep / submission of reports including safety and other compliance matters

Job requirement

• Prior experience with landed property construction in Singapore
• Experienced with Structural and architectural works for Building Construction
• Degree in Civil Engineering with relevant safety and construction certificate
• Kindly include project type in your resume

Job Description & Requirements

We are looking for a Senior/Staff Analog Layout Engineer to contribute to the development of High-Speed Connectivity, Broadband Analog and Computing/Storage-Memory Data-Transport products (including functional blocks such as high-speed digital, multi-GHz ADC/DAC, PLL/DLL serial and parallel I/O, and clock generation/distribution for custom ICs). The candidate must have a proven record of laying out high-performance analog circuits in state-of-the-art CMOS process technologies, successfully performed top-level integrations, and placed products into volume production multiple times.

Requirements

• Bachelor’s degree in Computer Science, Electrical Engineering or related fields and at least 2-5+ years of related professional experience.
• Master’s degree in Computer Science, Electrical Engineering or related fields with 3+ professional experience.
• Deep understanding of layout methodology from initial chip planning to tape-out.
• Deep understanding parasitic optimizing in layout
• Experiences in advanced process technology and Fin-FET is preferable.
• Have a high level of proficiency in interpretation of CALIBRE DRC, ERC, LVS, etc. reports.
• Have a high-level proficiency/knowledge of Synopsys or CADENCE layout entry tools.
• Programming skills in any of the following are a plus: Skill or Ample or Perl, etc.
• Strong technical and analytical background, problem solving skills, etc.
• Fluent in English

To apply, please submit your application via this link: Marvell Careers

Job Responsibilities:

• 6 days work week
• Has to be physically fit
• Able to carry loads that weighs at least 15kg
• Has to work under sun/rain and continuous loading of heavy goods
• Able to use cutting tools and machinery well
• Plus point if able to operate a forklift
• Need to perform ad hoc duties as arranged

manages the progress of a construction project by planning, organizing, and monitoring the work

• Planning and organizing plan and allocate work, and manage logistics to ensure that materials, equipment, and labor requests are completed on time and within budget
• Reviewing and approvingReview and approve designs, drawings, specifications, and materials to ensure they meet standards
• Directing activitiesDirect the activities of workers, subcontractors, and contractors on the site
• Inspecting and evaluatingInspect and evaluate the quality and safety of the work
• CommunicatingCommunicate with project stakeholders, such as architects, clients, and contractors, to ensure that everyone is aligned
• Identifying and mitigating risksIdentify and mitigate any risks or issues that arise during the project
• Implementing standards implement standards for quality, productivity, production, and customer service
• Resolving problems resolve problems and identify improvements to the construction management system

The Job:

• Devising and implementing methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment
• Designing and analysing inspection and testing processes, mechanisms, and equipment
• Conducting quality assurance tests and performing statistical analysis to assess the level of control and manage product quality risks
• Undertaking root cause analysis of incidents requiring corrective action
• Ensure that corrective measures and deviation meet acceptable reliability standards
• Other ad hoc duties assigned

Requirements

• API Q1 and Q2 certifications
• Internal audit certification

Interested applicants can send their detailed resumes to [email protected] or call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg. No. 199601303W || EA Licence No. 99C4599

COMPANY DESCRIPTION

1-Net manages carrier-neutral Internet Data Centers, along with providing a comprehensive range of integrated services including network connectivity, managed services, work area recovery suite, cloud and media delivery services. 1-Net's Data Center Corridor initiative currently interconnects key data centers in Singapore to facilities quick deployment and providing a diverse connectivity options for enterprises and service providers.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

1-Net is fast transforming itself into Asia's Data Centre of Choice. As one of the pioneers in broadband development in Singapore, 1-Net currently manages telco-class carrier-neutral Internet Data Centres, along with providing domestic and international connectivity, managed services and media delivery services. 1-Net offers superior stability, secure delivery and service experience through its services. It's uniquely positioned in Southeast Asia, with a comprehensive range of integrated services and a media-centric approach to bring cutting edge solutions to its customers.

This role is required to managed and support 1-Net's IT Services business, including Cloud Services, Managed Services, DC services, and Business Continuity Management Services.

Responsibilities

• Providing 2nd/3rd level support to Network Services
• Problem resolution in customer network issues
• Plan, implement, review and project manage network infrastructure projects and operations
• Test, evaluate and recommend new networking products for customers
• Review and continuously enhance existing network services
• Improve network performance; optimize network usage and bandwidth usage and secure the core network
• Optimize routing policies and capacity management to ensure minimal network latencies and outages
• Secure network with relevant security policies
• Responsive to solve network issues, on standby 24x7
• Assist L1/L2 Engineers to handle customers' issues directly
• Recommend suitable and relevant solutions to solve customers' issues
• Provide maintenance support for all network infrastructure
• Provide monthly network infrastructure performance review report and capacity planning recommendations
• Ensure efficiency and effectiveness of the implemented solutions in meeting user's requirements and work processes and procedures.
• Ensure timeliness & quality of project delivery.
• Structured cabling system implementation and cross connect provisioning.

• In depth practical experience in LAN/WAN implementation which include router & switches setup and configuration.
• Knowledge and experience with networking protocols, including BGP, VXLAN EVPN, OSPF, IOX-XR, NX-OS
• Structured Network Infrastructure for Layer 2 & 3 support.
• Certification in CCNA, CCNP is highly preferred
• Shift work required

DUTIES AND RESPONSIBILITIES:-

1. To be responsible for execution, planning, coordination, monitoring and commissioning projects assigned by the Project Manager or Team Leader.
2. To supervise and take responsibility of Installation Team.
3. To co-ordinate and liaison between departments, the daily company activities relating to project implementation, design, planning, material procurement, delivery, installation, testing & commissioning and after sales service.
4. To take measurements, check and verify all claims made by contractors undertaking the company’s work.
5. To prepare monthly progress claims, maintain up to date records of the claims and follow up on the payment certificate for the particular project assigned by the Project Manager.
6. To maintain up-to-date records and plans of all changes make on site and updating as built drawings for future submission of Operation & Maintenance Manual during project handing over.
7. To maintain up to date records of materials used on site and ensure site inventory is sufficient for continuity of works.
8. To liaise and discuss with consultants, main contractor and sub contractors concerning project’s technical and coordination issues.
9. To attend site meetings relating to the project assigned and prepare progress reports as and when required by the management or the client.
10. To issue and maintain up to date correspondence relating to the project assigned by the Project Manager.
11. To ensure the safety and health pratice, including hygiene and cleanliness matters, are being carried out and implemented at all time at the project site.
12. Any duties deemed necessary by The Management.

Requirements: -

• Recognized Degree / Diploma in Mechanical / Electrical Engineering.
• Min 2 years working experience in construction industry with min 1 year in Singapore
• Able to multi-task, Independent, self-discipline, willing to learn
• Able to interact with people of all levels and teamwork
• Knowledge in AutoCAD, Microsoft Project, Adobe Acrobat

We are seeking highly skilled Commissioning, Qualification, and Validation (CQV) Engineers to provide risk-based CQV services for pharmaceutical and biopharmaceutical clients. This role offers opportunities to work across various areas, including process equipment, CIP/SIP (Clean-In-Place/Sterilize-In-Place), and process manufacturing systems, with a focus on maintaining compliance with regulatory standards.

Key Focus Areas:

1. CQV for Facilities, HVAC, and Equipment
2. CQV for Cleaning Validation

Responsibilities:

• Develop risk assessments, system impact assessments, protocols, and reports to support qualification and validation requirements, in line with regulatory standards and industry best practices.
• Create validation protocols using a science and risk-based approach to ensure compliance with regulatory requirements.
• Review, analyze, interpret, and summarize system and process performance data from executed activities for reporting and presentations to management.
• Investigate deviations, prepare detailed investigation reports, and create summary reports to ensure clear documentation of issues and their resolutions.
• Apply good judgment within defined practices and policies to select appropriate methods and techniques for obtaining solutions.
• Author or support the creation of test scripts for commissioning and qualification (CQ) of facilities, HVAC systems, manufacturing or analytical equipment.
• Conduct cleaning validation studies to ensure processes meet stringent regulatory requirements.
• Author or execute test scripts for DeltaV batch recipe testing, ensuring seamless integration with production processes.
• Draft DeltaV batch recipes, ensuring alignment with manufacturing specifications and process requirements.

Requirements:

• Experience with pharmaceutical and biopharmaceutical processes, including commissioning, qualification, and validation.
• Knowledge of DeltaV batch processes and recipe creation/testing is highly desirable.
• Proven expertise in facilities, HVAC, equipment, or cleaning validation is required for the respective roles.
• Strong analytical and problem-solving skills with a good understanding of industry regulations and standards.
• Experience with risk-based validation approaches and developing protocols in compliance with regulatory requirements.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy

Job Description & Requirements

The Cybersecurity Engineer is responsible for designing, implementing, and maintaining security infrastructure to protect the organization’s IT systems and networks. This role involves analyzing, preventing, and mitigating security risks, conducting vulnerability assessments, and ensuring the overall security posture of the organization. The Cybersecurity Engineer will work closely with other IT teams to integrate security measures into the infrastructure, identify threats, and respond to incidents.

Key Responsibilities:

Security Infrastructure Design & Implementation:

• Design and implement secure network architectures, systems, and services.
• Build and configure security tools, such as firewalls, IDS/IPS, VPNs, endpoint protection, and SIEM systems.
• Integrate security solutions and ensure they are aligned with the organization's goals and policies.

Vulnerability Management:

• Conduct vulnerability assessments, penetration tests, and security audits to identify potential weaknesses in systems.
• Perform remediation activities by applying patches, hardening systems, and working with development teams to address security vulnerabilities.

Incident Response & Management:

• Respond to and investigate security incidents (e.g., data breaches, malware, DDoS attacks) to contain and mitigate damage.
• Collaborate with the incident response team to provide forensic analysis, determine the cause of incidents, and develop solutions to prevent recurrence.

Security Monitoring & Threat Intelligence:

• Continuously monitor and analyze security logs, alerts, and data from various security tools to detect and respond to potential threats.
• Leverage threat intelligence feeds and analysis to stay updated on emerging security threats and trends.
• Implement proactive security measures, including vulnerability scanning and intrusion detection.

Policy Development & Compliance:

• Develop, implement, and enforce security policies, procedures, and best practices across the organization.
• Ensure compliance with relevant regulatory standards, including IM8, CCoP 2.0, and other industry-specific frameworks.
• Conduct regular security assessments and audits to ensure adherence to security policies and standards.

Security Tools & Automation:

• Manage and optimize security tools such as SIEM, antivirus/anti-malware, firewalls, encryption, and endpoint protection systems.
• Automate repetitive security tasks and processes to increase efficiency and reduce manual intervention.

Collaboration & Training:

• Work closely with development, operations, and network teams to implement security into the SDLC (Software Development Lifecycle) and IT operations.
• Provide cybersecurity awareness training and guidance to employees to promote safe practices across the organization.

Documentation & Reporting:

• Maintain detailed documentation for all security systems, incidents, and actions taken.
• Generate regular reports on the status of the organization’s security posture, incidents, and risk assessments for management.

Qualifications & Requirements:

• Qualifications: Bachelor's degree in Cybersecurity, IT, Computer Science, or equivalent experience.
• Experience: Minimum of 2 years in cybersecurity or security engineering, with expertise in designing, implementing, and managing security solutions (e.g., firewalls, VPNs, IDS/IPS, endpoint protection).
• Technical Skills: Proficiency in vulnerability management, penetration testing, and security tools (SIEM, IDS/IPS, antivirus).
• Strong understanding of network protocols (TCP/IP), firewalls, VPNs, proxies, and related technologies.
  Familiarity with compliance standards (e.g., IM8, CCoP 2.0, NIST).
  Scripting expertise (Python, PowerShell, or Bash) for task automation and incident response.
  Hands-on experience with penetration testing tools (e.g., Kali Linux, Metasploit, Burp Suite, Nmap).

• Certifications (preferred): Certified Ethical Hacker (CEH), CompTIA Security+, or CySA+.
• Soft Skills: Strong analytical, troubleshooting, and communication skills (both written and verbal).
• Additional Knowledge: Security operations, incident response, and disaster recovery processes.

Shortlisted candidate will be notifed.

• Responsible for Equipment Uptime, Productivity and CIP.
• Work in a cleanroom environment for long hours.
• In-charge of PM planning, Equipment Maintenance, and Parts Management.
• Co-work with Engineer to resolve equipment/line issues.
• To improve and enhance machine performance and upgrade machine capability.
• Perform any other duties as assigned.

Requirements

• Diploma/Higher Nitec/Nitec in Engineering (Electrical / Electronic / Mechanical), or equivalent.
• Proficiency in Microsoft Office.
• Ability to work independently as well as in a team.
• At least 2 years of relevant working experience in manufacturing environment.
• Fresh graduates are also encouraged to apply.

Are you up for the challenging next step in your career? Stolthaven’s Asset Management – Projects department is looking for a Project Engineer who responsible for execution of the technical projects (Capex) for the terminals.

As a Project Engineer, you will be the project manager and have responsibility for the engineering and construction of projects, including all relevant project management tasks.

In this dynamic role, your responsibilities range from construction and modification of physical assets to providing engineering support to the Asset Manager in the design and construction of bulk liquid storage facilities and related equipment. Within the local and global Asset Management teams, you will share knowledge & experience on your specific project or engineering discipline expertise and be involved in efforts to train Asset Management colleagues or other Stolthaven functions.

As part of the local Asset Management team, you will work in close cooperation with the MR&I Engineer, Maintenance Supervisors and other roles for developing project cost estimates to existing and proposed facilities in consideration of environmental and customer requirements. The position is also responsible for review and quality control of field construction work, although potentially supported by Construction Supervisors. Implements programs for compliance with all government and regulatory requirement and other technical areas.

SHVN Stolthaven Terminals a division of Stolt[1]Nielsen Limited (SNL), is the specialist storage provider of bulk liquids: Chemicals, clean petroleum, gases, vegetable oils, biofuels and oleochemicals. Our mission is to be the most respected global storage provider, delivering safe, high-quality, sustainable storage and handling solutions for our customers around the world.

Key Responsibilities

1. Provides comprehensive technical and management support on all technical projects assigned by the Asset Manager. Typically class I & II capex projects. This includes, but is not limited to:

• Prepare project details, scope engineering documents and cost estimate for the execution of the capex program together with (main) contractors and other departments and disciplines
• Prepare Requests for Quotation and other procurement documents in close cooperation with Stolthaven’s procurement team
• Responsible for coordination of procurement and or contracting of materials and services for your projects together with Stolthaven procurement
• Governance on quality and legal and or safety requirements during the whole project including execution
• Responsible for commissioning and closing of the project to operations and maintenance and ensure closure of project including timely completing of as-built files
• Responsible for leading change process in case of scope change
• Responsible for safety, quality, progress and cost control and reporting during the project
• Sets priorities and project scheduling for completion of projects within required deadlines
• Provides input to Manager of Engineering as required to complete monthly cost and schedule tracking reports on capital projects
• Supervises contractors in activities related to new construction, modifications to existing facilities and plant repair items
• Responsible for leading project evaluations and Management of Change processes for the projects at hand.
• For larger projects, this role can also be part of a project management team whereas the responsibilities are defined by the Project Manager.

2. General multi-disciplinary engineering works, such as:

• Support the preparation of technical proposals for improvements of technical installations
• o Proactively identifies technical risks in projects and seeks for mitigation
• o Providing assistance in the formation of annual capital budget forecasts
• o Ensure all systems within the facility are designed, installed, and maintained in accordance to local, state and federal regulations and standards

3. Support or promote innovations, new products and methods by:

• Meeting with vendors to acquire knowledge to technical advancement, cost control and alternate solutions to typical terminal design and maintenance requirements
• Attending continuing education seminars and conferences to acquire knowledge pertinent to technological advances and regulatory changes
• Interacts with other initiatives for example in Risk Based Inspection meetings contributing to standardized way of working over terminals and within team by working on corporate projects assisting the global Asset Management team

4. Enforces established plant safety and environmental policy and procedures as related to assigned projects and related tasks.

Qualifications

1. Bachelor/Master degree in Mechanical Engineering, E&IA, Civil or related field

2. Proven track record in an engineering design position, preferably in the field of storage tanks or in a related industry

3. Must be familiar with all applicable standards and codes relating to bulk liquid storage facilities for the applicable terminal location. This could include IEC, API, EEMUA, ANSI, NFPA, NEC, OSHA, and CFR and any other (local) codes.

4. Project management experience is preferred field

5. Minimum 5 years progressive engineering experience in terminal or related industry

6. Minimum 10 years progressive experience in terminal or related industry may be accepted in lieu of a degree

7. Self-motivated to ‘close the loop’ with actions and administrative responsibilities

8. Fluency in English and preferably in Chinese (read & write) as the job requires liaising with our Taiwan joint venture

9. Able to build and maintain both internal and external relations on various levels

10. Able to communicate effectively both verbally and in written

11, Proven safety leadership and service mindedness

12. Competences: self-motivated, flexible, stress resistant, result driven, team player, humour

13. Requires advanced conceptual thinking in complex and/or completely new situations and analytical skills

14. Must be computer literate with specific skills in MS Office

15. Knowledge of and experience with planning software (e.g. MS Projects, Oracle Primavera etc.) and Autodesk products (e.g. Autocad) is considered an advantage

16. Occasionally the ability and willingness to work weekends and/or holidays to accomplish critical project assignments

17. Depending on the required engineering discipline, have knowledge of the following:

• Mechanical: Must have in-depth knowledge of all standards and codes relating to bulk liquid storage facilities applicable to the location, such as API, ANSI, NFPA, NEC, OSHA, CFR, PGS
• EI&A: Must be familiar with all standards and codes relating to bulk liquid storage facilities applicable to the location, such as ATEX, IEC, IEC61511, SIL applications, field instrumentation
• Affinity with IT network components (e.g. firewall and basic networking setup) and experience with FAT for E&I system, panels, automation, etc.
• Knowledge and experience with reviewing drawings such as P&ID, Single Line Diagram, MCC drawings and other E/I/Automation specifications, calculations and drawings
• Knowledge and experience with ACAD and E-plan drawings
• Experience with trouble shooting E&I installations

18. Willing to working in Jurong Island (Company transport is provided at designated pickup point)

What we offer

Join us and become part of a family-founded organization where your contribution counts.

• A full-time and permanent role
• Working Hours: 5 days’ work week (Mon-Fri), 8.30am to 5.30pm
• A competitive compensation package, including a 13th month
• Good Flexible Medical Benefits for you and your family members
• Company Transport is provided as designated pick-up point

How to apply

• Complete the online application form and send it to us along with your CV
• Short-listed candidate, will be invited to attend interview at our terminal

Got questions about the process? Contact [email protected].

About Stolt-Nielsen

Stolt-Nielsen Limited is a long-term investor and manager of businesses, focused on opportunities in logistics, distribution, and aquaculture. The Stolt[1]Nielsen portfolio consists of its (three) global bulk-liquid and chemicals logistics businesses – Stolt Tankers, Stolthaven Terminals and Stolt Tank Containers – Stolt Sea Farm and investments in LNG. Stolt-Nielsen Limited is listed on the Oslo Stock Exchange (Oslo Børs: SNI).

Disclaimer for recruitment agencies

We don’t accept any unsolicited applications or CVs from recruitment and selection agencies.

GIC is one of the world’s largest sovereign wealth funds. With over 2,000 employees across 11 locations around the world, we invest in more than 40 countries globally across asset classes and businesses. Working at GIC gives you exposure to an extraordinary network of the world’s industry leaders. As a leading global long-term investor, we Work at the Point of Impact for Singapore’s financial future, and the communities we invest in worldwide.

Technology Group
We experiment, design, and lead a 24×7 global business where we support core capabilities in asset management, trading, investment operations, and risk management. We deliver secure, reliable, and integrated solutions, and provide insights on new, and emerging technologies.

Service Integration and Management
You will help to deliver excellent end-user experiences and provide high quality support across our staff in 11 global offices

What impact can you make in this role?
You will be empowered to be at the top of your game by providing strategic partnership, and innovative technology solutions that supports GIC’s vision of being a tech-driven, global, long-term investment firm.

What will you do as an IT Service Management (ITSM) Engineer?

• Support IT Service Management operations, project and enhancement initiatives
• Develop service requests in ITSM platform
• Provide support in implementation of IT service management activities which may include the following areas:Analysis of service requests and enhancement the catalogue items
  User requirement gathering and solution design
  Build or enhance service requests in ITSM platform
  ITSM setup and configuration that adhere to the current ITSM process
  ITSM platform patching, upgrade, and maintenance works
  Work with Automation/Orchestration team to integrate with catalogs, approvals, and workflows
  Maintain and develop technical documentation and standard operational procedures
  Ensure compliance with IT security standards, policies and procedures
  Work closely with various IT Infrastructure and Operations teams to support and troubleshoot problems and issues
  

What makes you a successful candidate?

• Experience with ITSM platform architecture on BMC Helix, or other ITSM platform such as Service Now, Atlassian JIRA Service Management, Freshworks, etc
• Proficiency in programming languages such as JavaScript, Python for use in automation
• Experience in technology delivery – preferably with some experience of delivering in automation and optimization.
• Excellent problem-solving and analysis skills, with the ability to identify and address complex engineering challenges

Work at the Point of Impact
We need to be forward-looking to attract the right people to help us become the Leading Global Long-term Investor. Join our ambitious, agile, and diverse teams - be empowered to push boundaries and pursue innovative ideas, share your views, and be heard. Be anchored on our PRIME Values: Prudence, Respect, Integrity, Merit and Excellence, which guides us in how we make our day-to-day decisions. We strive to inspire. To make an impact.

Flexibility at GIC
At GIC, our offices are vibrant hubs for ideation, professional growth, and interpersonal connection. At the same time, we believe that flexibility allows us to do our best work and be our best selves. Thus, our teams come into the office four days per week to harness the benefits of in-person collaboration, but have the flexibility to choose which days they work from home and adjust this arrangement as situational needs arise.

We are an equal opportunity employer
GIC is an equal opportunity employer, and we value diversity. We do not discriminate based on race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please email [email protected] at any point of the application or interview process if adjustments need to be made due to a disability.

Learn more about our Technology Group here:
https://gic.careers/group/technology-group/

To be considered for the role, please submit a formal application through the GIC Careers site at:

https://careers.gic.com.sg/job-invite/16161/

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit/replacement recommendations to clients

5. On-the-job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement/process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of faults/breakdowns and rectification according to authorities/clients' requirements.

9. Perform full set of testing complying with authorities/clients' requirements.

10. Perform maintenance programs and comply to authorities/clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.