Summary

This position is accountable for preparing the detailed Construction plans in accordance with the JGCAP’s company policies as the key person under the direction by JGCAP’s Site In-charge/ Project Manager and coordinating all construction activities on site among all JGCAP’s disciplines including subcontractors using his technical experiences and construction know-how and ensuring the completion of the work on schedule.

The detail plans as described above are as follows:

• Execution formation with the direction by JGCAP’s Site In-charge/ Project Manager.
• Outline of the Construction & sequence of work.
• Temporary facilities plan (If require) and subcontracting Plan.
• Manpower mobilization plan.
• Construction equipment mobilization plan.
• Work closely with the project scheduler on construction schedule and progress reporting.
• Constructability studies and plans, coordinate with Project Engineers and other related discipline as and when necessary.
• Scaffolding plan.
• Reflect the constructability plans in the inquiry for subcontracting.
• Preparation of documents such as specifications, procedures, manuals and etc.
• Erection plan of extra heavy equipment, inclusive of haulage plan.
• HSSE work control plan including rules and promotion plan together with JGCAP’s Site HSSE personnel.
• Coordinate with Project team of vendor specialists for work which need vendor specialist support.

Duties & Responsibilities:

• Initiate the subcontractors sourcing, inquiry package issuing, work scope clarification, sub-contractors evaluation & selection, cost negotiation and PO issuance.
• Work scope clarification & confirmation, BQ verification and construction direct & indirect cost estimation.
• Initiate Project’s Kick off meeting with the selected subcontractor and coordinating with selected subcontractors to ensure they are in line with company or project strategies and planning. Discussing and clarifying the detail of scope of work, execution plan, commercial issue and technical issue to minimize potential future conflict.
• Carry out constructability studies, construction activities planning and execution plan for the job.
• Coordinating with all engineering disciplines to ensure design, cost and client’s requirement can be achieved.
• Handling of issued drawings or field change sheet to ensure latest drawings to be applied.
• Work closely with the team member and subcontractor to prepare all the MSRA required for the project.
• Working closely with scheduler, subcontractors and clients to plan ahead and schedule critical work paths in order to avoid delays or obstructions on mechanical completion.
• Day to day management of the site, including supervising and monitoring the work progress, site labour force and any work of subcontractors.
• Overseeing quality control and health and safety matters on site.
• Maintain knowledge on all contract terms and legal requirements for project to avoid any delay in projects.
• Identify and resolve all technical issues in Construction process.
• Liaising with clients and company project team, including attending regular meeting and submitting reports to keep them informed of progress and construction issues.
• Liaising with any vendors, consultant, supervisors, subcontractors and the general workforce involved in the project.
• Assist the JGCAP’s Site In-charge/ Project Manager to monitor and manage the overall construction cost, including subcontractors’ progress billing, construction expenses and cost of variation order.
• Prepare and submit the weekly and monthly progress/construction reports to management.

Education Qualifications & Other Requirements:

• Degree in Mechanical engineering or equivalent.
• Over 3 years’ relevant experience in construction management field.
• Experience in oil and gas or chemical projects.
• Knowledge in construction planning.
• Knowledge and experience in sub-contracting work.
• Proficient in MS Office, MS Powerpoint and schedule reporting.
• Clear awareness of construction management tools and method of execution.
• Familiar with Construction Practices.

Interested parties, please send in your detailed resume.

· Oversee LMU team in Town Council, to ensure lift performance meet TCMR requirement, Green Bands for both categories and Green Band for every Division

· Oversee the LMU team in Town Council to ensure P-Trapped

· Plan lift testing schedule before expiry of lifts & return completed schedule and submit to SPE and GM (EMS) / Engineers (LMU)

· All lifts to be tested including submission for PTO before the expiry month

· Ensure testing defect letters send out and ensure Lift Companies rectify defects

· Submit test report including verified defect letters for Engineers (LMU) to endorse

· Process cyclical / project management fee claims invoices & ensure no claim to be left out

· Submit the completed handling fee monitoring list to EMS (GM) / Engineers (LMU)

· Communicate the WSH requirement to Technicians half yearly and ensure document of the communication is done

· Conduct Tool Box meeting fortnightly & submit to EMS monthly for retention

· Agreed Damages cases for lift breakdown rates and lifts with more than 2/3 breakdowns per month

· ARD Failure Percentage and ARD Inoperative (ARDI cases)

· Plan of Budget and Expenditure

· Attend lift incident case during and after office hours & submit report

· No adverse complaint from TC on technical support to TC on lift matters

• Job assigned by GM (EMS)/ Engineers (LMU)

Description:

• To improve and optimize the manufacturing processes and practices.
• To oversee design and installation of new process equipment, e.g. bottle/drum filling lines, storage/blending tank installation.
• To participate in new product introduction project.
• To carry out maintenance on the factory facilities and production equipment.
• To spearhead and maintain the environmental and safety management system.
• To take charge and oversee the jetty operation.
• To provide technical training.
• To perform any other works as required and assigned by superior.

Requirement:

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Chemical), Engineering (Mechanical) or equivalent.
• At least 2 Year(s) of working experience in the related field is required for this position.
• Preferably Executive specialized in Engineering - Chemical or equivalent.
• Workplace Safety and Health level B or higher.
• Port Facility Security Officer an added advantage.
• Certified Internal Quality Auditor an added advantage.

How to Apply:

Interested applicants may apply by sending in the following:

1. Updated resume
2. Short description of experience
3. Reason for leaving prior jobs
4. Current and expected salary

We regret to inform that only shortlisted candidates will be notified.

About the Company

We are focusing on AI/ML, Vidoe Analytic, Cloud, and Cyber Security to provide bespoke solutions using emerging technologies through applied research and development. Due to our expansion plan, we are looking to hire a NLP Engineer to join the team.

About the Job

You will be applying NLP knowledge to develop GenAI solutions leveraging ML frameworks. Proven ability in statistical analysis, deep learning methods, understanding of generative AI methods and text representation techniques. The use cases for the NLP solutions include document search, data comparison, and chatbot-based applications.

Requirements

You will need a minimum of a bachelor’s degree in Computer Science, Computer Engineering, a related field, or equivalent professional experience.

• You will need min 2 years of hands-on experience in GenAI solution development, specifically in NLP applications (RAG, NER, JER, prompt engineering, etc.).
• Good proficiency in Python is required.
• Expertise in selecting and understanding relevant GenAI frameworks (LangChain, LlamaIndex, LlamaFactory, etc.) is required.
• Experience with ML Frameworks (Tensorflow, Pytorch, HuggingFace) is required.

R1332781

Work Location: Loyang (but first 6 months training will be at Shipyard Crescent)

Working hours: 7.30am to 4.30pm (Mon to Fri); 7.30am to 11am (Sat)

Responsibilities:

• Responsible for ensuring highest possible uptime and availability for mechanical equipment in the scrap processing plant.
• Responsible for reliability is highest possible and where needed facilities / perform root cause investigations to increase reliability and general performance of equipment.
• Ensure incident free and reliable operation, including timely and proper maintenance of systems.
• Responsible for implementing Maintenance Excellence by aligning with International Best Practice on mechanical equipment.
• Ensure future maintenance activities are proactively planned, prepared
• Ensure technical, environmental and safety aspects in all matters is assessed in compliance with Health and Safety regulations.
• Other ad hoc duties assigned

Requirements:

• At least Bachelor's Degree/Post Graduate Diploma/Professional Degree, Master's Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.
• At least 5 Year(s) of working experience in the related field is required for this position.
• Required knowledge: hydraulic system, rotating parts, PLC system, Conveyor belts
• Specialized in Engineering - Mechanical/Automotive or equivalent is a plus.

Interested applicants please send your resumes to [email protected]

Jessica Nguyen Huynh Thanh Truc

Recruiter (R23113787)

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

1. To assist Director in monitoring and controlling of level of professional standard of work carried out by the project teams.

2. To carry out Complex Structures design and submissions to the authorities.

3. To carry out analyses using Finite Element Analysis software and trouble-shoot any error found.

4. To perform Value Engineering on structural schemes and solutions.

5. To assist Directors with the preparation of presentation slides.

6. To review problems arising during the course of each project and to initiate non-conformance preventive and corrective actions.

7. To report to the Director/ Associate on all matters regarding design and technical issues.

8. To develop and monitor Project from conception to completion.

We are looking for an AI Development Engineer to be a part of our #blazeclan Singapore team!

This is an exciting opportunity for a qualified professional with an overall 4+ years of experience to join and add value to one of the Fastest Growing BIC (Born in the Cloud) company.

We would like to hire enthusiastic people who thrive on taking on challenging roles in order to give them an opportunity to hone new skills and try novel approaches.

As we are growing, we embrace diversity in thought, contribution and are committed to providing an equitable work environment.

JOB DESCRIPTION:

We are looking for a highly skilled AI Development Engineer with expertise in Python development and AWS cloud environments. In this role, you will focus on integrating and embedding AI capabilities into our products, as well as developing native AI applications leveraging mature AI technologies. While deep AI expertise is not mandatory, a solid understanding of AI concepts will be advantageous.

The ideal candidate will thrive in a collaborative environment, working with cross-functional teams to solve complex problems, deliver innovative solutions, and enhance both employee and customer experiences. Strong communication skills in English, both technical and non-technical, are essential.

Key Responsibilities

Develop and maintain scalable applications and solutions in AWS native environments.
Build, deploy, and integrate microservices architectures for AI-enabled products.
Collaborate closely with product, engineering, and business teams to identify AI opportunities and embed AI features in our offerings.
Utilize Python to build robust, efficient, and maintainable code.
Apply existing, mature AI models and services to enhance product functionality and improve business outcomes.
Participate in code reviews and adhere to development best practices.
Ensure seamless communication between various cloud-based components and services within AWS.
Support the design, testing, and troubleshooting of cloud-native AI applications.
Foster a collaborative team environment by contributing ideas and openly engaging with peers.

Requirements

Proficient in Python development with extensive hands-on experience.
Strong expertise in AWS services (e.g., Lambda, S3, EC2, SageMaker, DynamoDB).
Familiarity with microservices architecture and cloud-native development.
Experience in deploying and managing AI-powered applications within cloud ecosystems.
Ability to work with existing AI models and integrate them into products.
Excellent communication skills with the ability to convey complex technical concepts clearly.
Strong team player and collaborator, able to work effectively across multidisciplinary teams.
Preferred Qualifications

Background or knowledge in AI/ML concepts and frameworks.
Experience with DevOps and continuous integration/continuous deployment (CI/CD) pipelines.
Familiarity with containerization technologies (e.g., Docker, Kubernetes).
Prior experience with AWS tools like SageMaker, Rekognition, or Comprehend.


---------------------------------

We are Great Place to Work certified; looking for technically forward, cloud-savvy professionals.

Join us and commit to work in an ambiance that is free of prejudices.

If you think you could be the perfect fit for us, then take the leap and apply today!

Let us know at: [email protected]

We would love to hear from you!

Job Description

• Managing the testing and commissioning of water and wastewater onshore and offshore facilities (FPSO and etc).
• Lead the development and execution of commissioning and startup plans.
• Lead the development of written procedures for testing, cleaning and initial startup of major plant equipment and systems.
• Manage client/vendor/subcontractor coordination for the startup of completed systems. Provide training program and materials for process plant equipment.
• Manage documentation of the commissioning process, including commissioning data and as built documentation, input to O&Ms and feedback to the design disciplines.
• Communicate clearly and concisely, both verbally and in writing.
• Establish and maintain effective working relationships with those contacted in the course of work.
• Recognize the importance of satisfying the customer as the key to achieving other objectives.
• Participate in the acquisition and storing of business and technical knowledge, and the use of those stored intellectual assets.
• Maintain and Recognize that Health and Safety considerations are central to all tasks, and contribute to ensuring safe working environment for all.
• Report safety issues responsibly and participate in improving practice.
• Ensure your own continuous professional development by participating in external networking/conferences/associations/groups, to stay current on industry changes and innovations.
• To continue to develop personally and technically.
• Maintain a positive and solution-oriented approach to work, providing open and honest feedback.
• Attend Progress & Commissioning Meetings.
• Compile commissioning documentation and deliverables.

Requirements

• Degree in Chemical Engineering and/or Degree in Engineering (Mechanical)
• Strong Technical Knowledge
• Minimum 10 years of relevant experience in Water and Waste Treatment and experience in onshore/offshore Oil & Gas area or FPSO line(s)
• Travel to offshore project sites and perform offshore commissioning / assist facility startup
• Those with relevant project management / plant testing & commissioning experience will be an added advantage
• Proficient in MS Office and Microsoft Project
• A resourceful self-starter who possess excellent problem-solving skills
• Systematic and able to work under pressure
• Mature, proactive, take initiative and well organized
• Meticulous and able to follow through with tasks promptly
• Proficiency using Microsoft Office and Microsoft Project, good report writing skills

Are you looking for value adding and impactful work?
Do you want to make a difference with your expertise?

With us, you’ll be able to make it happen.

NCS is a leading technology services firm, operating across Asia Pacific in over 20 countries, providing services and solutions in consulting, digital services, technology, and more.

We believe in utilizing the power of technology to make extraordinary things happen and to create lasting impact and value for our people, communities, and partners. Our diverse 12,000-strong workforce has delivered a wealth of large-scale, mission-critical, and multi-platform projects for governments and enterprises in Singapore and the APAC region.

What we do

We drive our passion for harnessing technology.
We bring people and technology together.
We advance communities and transform industries.

We’re searching for a Network Engineer to be part of our diverse team of talent here at NCS!

If you believe in going above and beyond, want to exemplify the best, and wish to bring people and technology together like never before, then we would love to have a conversation with you!

What we seek to accomplish together:

The Network Engineer is responsible to provide operational support to network infrastructure, support to the clients and resolution of technical issues and conducting root cause analysis. The network engineer is also required to manage change request through changes requests processes including requirement gathering, impact analysis, design, testing to integrate the change to existing environment.

A little about you:

• Responsible for the infrastructure network design, implementation, testing, security, managing and maintenance of proposed system
• Work closely with Team Leader to meet system delivery milestones
• Provide technical documentation support to Project & Solutions Teams, as well as hand over as-built system documentation to Maintenance support team
• Respond promptly to incident, root cause analysis & provide temporary and/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties
• Engage with back-line support and/or with vendor’s support to diagnose and rectify technical problems.
• Implement service continuity measures, i.e., backup/restore procedures & disaster recovery plan, to ensure continuous operation of the business.
• Assist in day-to-day operation of the System Delivery team
• Carry out other technical related duties that may be required.
• Attain key certifications for partnership with key vendors.

What you might also need to have:

• Bachelor’s degree or higher in Computer Science/Information Technology/Engineering or equivalent
• 2 years of experience in configuring and administering routers and switches (e.g. Cisco routers and switches, etc), firewall products (e.g. CheckPoint, Forcepoint, etc.), F5 Load Balancers, AAA, NTP, IPS
• Good understanding of network system, network architecture, routing, switching, firewall and security
• Good interpersonal and communication skills with ability to explain technology from a customer perspective
• Proficient in performing network analysis and troubleshooting using network and protocol analyzers
• Network certification in CCNA/CCNP/CCIE is a plus
• 24 x 7 standby support as required

About NCS Group

We want to create the extraordinary, and to impact millions of people everyday.

We believe in building a talent-led delivery model to enable our best people to lead, and to support them with the right structure, processes, and tools to ensure that our clients are delivered top quality services.

We want to invest in you!

Great work is never done alone, and that’s why we also believe in creating a collaborative work environment to bring people with different expertise and talent together.

We create opportunities for our people to grow in our organization with well-defined career tracks and specializations to ensure that our people and talent can continuously deliver new value for our clients.

We’re here to make the extraordinary happen.

Learn more at ncs.co and our LinkedIn Career site.
All profiles are handled with highest level of confidentiality.

We are committed to a safe and healthy environment for our employees & customers and will require all prospective employees to be fully vaccinated.

CLASS 4 DRIVER / LORRY CRANE

Job Description & Requirements

• Able to drive at night or day
• Possess class 4 Driving License with Operates Lorry Crane certificate
• Operates Lorry Crane occassionaly with extra incentive
• Extensive knowledge of the operating area.
• Excellent organizational and time management skills.
• Exceptional interpersonal skills.
• Delivery of company product to site
• Ensure timely delivery of goods in accordance to assigned schedule
• Perform loading and unloading of goods
• Conduct daily inspection of vehicle to ensure road worthiness of vehicle
• Assess work areas before performing any lifting operations
• Ensure maintenance and upkeep cleanliness of vehicle

Requirements:

• Class 4 driving
• Lorry crane license a must
• Punctual and reliable
• Understand and comply with safety requirements
• Able to start work immediately

Electrical Engineer (Marine offshore)

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday to Friday 8.30am to 6pm.
• Salary range: S$ 3,500 - 4,200

Job Responsibilities:

• Design control systems
• Preparation of drawings for customer approval
• Preparation of drawings/ BCM for shop floor production
• Co-ordinating with clients, consultants and internal department.
• Drafting work with use of CAD system (AUTOCAD/SOLIDWORKS).
• Any other ad-hoc duties as assigned.

Requirements:

• Diploma in Electrical Engineering.
• Hands on experience with vessel mechanical and engine systems.
• Experience with engineering design software.
• Familiarity with maritime HM&E systems and naval construction processes.

WhatsApp or Email your Resumé now for Interview Arrangements !

Whatsapp: +65 80231200

✉ [email protected]

Daniel Wong Reg No: R2095781

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Responsibilities:

• Understanding project specifications and developing time schedules and budgets that meet them.
• Negotiating with vendors and contractors to secure the best prices.
• Observing existing processes, analyzing staff performance, and addressing deficiencies accordingly.
• Monitoring and tracking project progress, and writing up reports.
• Attending and scheduling meetings as required.
• Delegating tasks and ensuring workers receive feedback.
• Understanding and meeting all contract requirements.
• Communicating with managers, supervisors, and the rest of the team.
• Analyzing technical drawings and providing material and cost estimates.
• Ensuring all projects are completed on time and within budget.

Requirements:

• Degree in Engineering or similar.
• Primavera P6 and BIM software (Eg. Revit, Visualization and Animation software)
• Experience with 3D modeling software.
• Proficiency in MS Office.
• Planning and project management skills.
• Strong analytical, critical, and logical thinking skills.
• Ability to focus under pressure and meet deadlines.

Mission

• Plan and implement the Project Quality Management System (PQMS) activities within the project and organization.
• Plan and ensure the project Quality Control (QC) activities implementation
• Report Quality information and data about Project in line with Corporate Guidelines
• Act as focal point for quality related matters within the project and in liaison with external entities.
• Act as Auditor Lead for ISO matters.

Major Duty and Tasks

• Ensure the definition and implementation of the PQMS and the identification, preparation and distribution of needed Project Quality Plans and procedures in accordance with the Company and External Parties Quality Management System (QMS)
• Ensure that the integrity of the Company QMS is maintained when changes are made to the system for the project
• Ensure that the correct implementation of the Project QMS is checked and monitored through the planning of quality audits
• Ensure that the correct implementation of planned quality audits, taking in account all project processes, including the issue of relevant audit reports
• Ensure, within the project organization, the planning of activities aimed at promoting the applicable Contractual Quality Requirements
• Conduct external audit to Vendors and Subcontractors QMS and ISO requirements
• Ensure, within the project organization, the planning of activities aimed at promoting the applicable Contractual Quality Requirements
• Plan and allocate Quality resources to the various area of the project, managing them in liaison with involved Quality functions
• Support the Project Manager in relations with the Client and with the Authorities responsible for quality matters
• Participates to Project Management meetings, to ensure coordination between Quality activities and Project Management activities
• Ensure the preparation and issue of QC specifications for the works, coordinating and agreeing the checks by the Technical Departments and Client
• Ensure the issue of quality requirements to be incorporated, in the contractual documents, with Vendors and Subcontractors and organizations in charge of works
• Ensure the Site QC activities implementation, including the monitoring of QC management tool updating
• Ensure management of nonconformities
• Promote appropriate actions in order to prevent or eliminate potential non-conformities and their causes
• Ensure the management of Cost of Non Quality process
• Ensure knowledge and awareness of Quality requirements within the Project Team, also performing Quality Training activities
• Collect and analyse project quality data also to organize and lead the Project Quality Management Review
• Ensure the management of lessons learned process
• Ensure Customer satisfaction process implementation
• Report Project information and data to Company's Quality Manager by means of Corporate methodologies and tools and keep the Project Quality Reporting tools updated.
• Providing leadership, mentorship, and direction of all QA/QC personal.

Additional Requirements

• Ability to read PID’s and Isometric drawings.
• Understand NDT techniques.
• Experience with Ferrite and PMI techniques
• Knowledge of WPS/PQR activities
• Knowledge of Painting
• Familiar with AWS/ASME/ANSI codes and standards
• Experience with general Oilfield fabrication products
• Maintain the required test records and update accordingly.
• Conduct incoming and outgoing inspection activities such as inspecting the final output, comparing it to the requirements, and approving or rejecting the final products.
• Monitor the welding, NDT and etc activities.

Requirements:

• Diploma/Degree in relevant/related fields
• Min 10 years of QC inspection experience for Water, Oil and Gas fabrication
• Inspection Qualifications eg: CSWIP or equivalent
• Able to communicate with various level of people
• Good in verbal and written English
• General computer knowledge is essential (MS word, excel, powerpoint, MS outlook)
• Willing and able to travel overseas

Responsibilities:

• Collaborate with the presales team to conduct site surveys and assessments. This involves evaluating the customer's location, infrastructure, and specific requirements to determine the ideal setup and deployment for the robot.
• Responsible for setting up, commissioning the robot on-site and ensuring the robot is ready for operation.
• Perform thorough testing, identify and troubleshoot errors/failures and implement appropriate solutions to resolve the issues promptly.
• Handle repairs and maintenance tasks for the robot. This involves conducting regular maintenance activities as per the SOP/guidelines and addressing any breakdowns or equipment failures.
• Travel to customer sites, both local and international (whenever necessary), to provide on-site support, conduct setup/commissioning, perform maintenance tasks, and resolve technical issues at short notice to provide support or address urgent issues. Additionally, you should be willing to adapt to the customer's work environment and schedule, which may include night shifts and public holidays when necessary.
• Responsible for documenting service and fault reports. This includes accurately recording the details of the service provided, issues encountered, and the actions taken to resolve them. These reports are typically submitted to superiors and key individuals within the organization for review and analysis.
• Maintain detailed records of all tasks related to customer service. This includes maintaining customer service logs, updating internal service records, and ensuring all documentation is completed in a timely manner.
• Train customers and end-users on the proper handling, maintenance, and safety procedures of robot operation. Create and update documentation, including user manuals and service guides, to facilitate knowledge transfer and enhance support processes.

Requirements:

• Minimum Diploma in Engineering or other related fields
• 2 years of experience in servicing electronic and mechanical equipment / machines.
• Experience with troubleshooting and debugging hardware, electronics, and software.
• Excellent problem-solving skills and the ability to work under pressure in fast-paced environments.
• Effective communication skills with the ability to explain complex technical concepts to both technical and non-technical stakeholders.
• Strong communication skills in English (both oral and written)
• Tools: Basic knowledge on handling mechanical, electrical and electronic tools.
• Able to perform simple network configuration.
• Able to work independently and as part of a harmonious and effective team.
• Able to communicate well and tactfully with customers/distributors.

Job Scope:

• Develop and maintain relationships with key clients and prospects.
• Identify customer needs and provide technical solutions that align with product offerings.
• Conduct product presentations and demonstrations to clients.
• Provide technical support and advice to customers during the sales process.
• Prepare and deliver detailed product proposals, quotations, and technical documentation.
• Collaborate with engineering and product teams to ensure customer requirements are met.
• Drive sales growth through direct sales activities and follow-ups.
• Negotiate terms and close sales agreements.
• Conduct market research to identify new business opportunities and market trends.
• Provide post-sales support and ensure customer satisfaction.
• Attend trade shows, conferences, and industry events to promote products and services.
• Track and report on sales performance, targets, and project progress.
• Ensure compliance with company sales policies, pricing strategies, and technical standards.
• Assist in the development of marketing materials and sales tools.

Requirements:

• Diploma/Degree in Electronics, Electrical, Engineering, Industrial, or Mechatronics
• No experience required, entry-level candidates welcome
• Passion for automation, creative and adaptive approach
• Good communication skills, able to explain technical concepts clearly
• Product training provided
• Knowledge of PLC programming, touch panels, control, and automation

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Be the Single Point of Contact for all matters related to setting up, maintaining, administering, upgrading, and troubleshooting the AVEVA NET system.
• Coordinate with the engineering disciplines assigned to the project and work closely with project management, procurement, HSE, QA/QC, operations, and the construction team. Meet or, where possible, exceed on-time deliverables while maintaining quality and safety in each activity.
• Establish and maintain the creation of a Class Library and define its structure and mapping techniques in ISM.
• Develop efficient data capture, validation, loading and handover work processes to meet Client/Project schedule requirements.
• Establish new project portals that effectively reflect client/project class libraries, data structure, and handover requirements.
• Ongoing Gateway configuration, maintenance, and development of AVEVA NET portals.
• Generation of Query Forms, SSRS and BI reports communicating data discrepancies, omissions, completion trending and status.
• Raise the profile of information management and create a data-centric culture via effective portal development and deployment.
• Shall be capable of developing work instructions for users of AVEVA NET.
• Must understand company goals and implement management directives and policies.
• Anticipate potential problems and take preventive actions.
• Support the Product Manager in planning and delivering AVEVA NET solutions on projects.
• Shall train users on the AVEVA NET application in projects.
• Interface with all disciplines to clarify/explain AVEVA NET intent and suggest alternatives.
• Contribute to continuous improvement of company work methodology/procedures.
• Conclude all open issues amicably.
• Work closely with the AVEVA application engineers, E3D administrators, and the IM team to ensure the smooth execution and delivery of AVEVA NET solutions on projects.
• Assist in fault diagnosis and deployment of fixes in support of implementation work.
• Interact with pre-ops/Operations/Clients as required.
• Guide Applications Engineers and inform appropriate parties at the proper time.
• Understand interface issues related to AVEVA Engineering systems and actively manage them.
• Develop relationships with client technical or service personnel and encourage feedback from all directions.

Requirements:

Certification: Training in AVEVA NET administration

• Possess at least 5 years of experience applying AVEVA NET in onshore/offshore Oil & Gas areas or FPSO line(s).
• AVEVA NET/AIM and AVEVA ISM administration and implementation.
• Proficient in exception handling between the AVEVA system with associated Gateways and the Client system
• Extensive knowledge of AVEVA registers gateway interface with Client system.
• Experience in mapping Company data and document structures to Client structures. Have an in-depth understanding of FEED & Detailed Design deliverables, their execution methodology and their interdependencies with one another.
• Have previous experience in engineering information management.
• Possess previous experience with AVEVA Net Portal and ISM development and administration skills on Oil & Gas Projects, specifically for Major Capital Projects.
• Knowledge of Engineering Design software like AVEVA E3D and AVEVA Engineering is a plus.
• Possesses good working knowledge of the Oil & Gas Industry, including EPCs and owner-operators (preferred but not mandatory).

Software & Other Skills

• AVEVA NET/ AIM
• AVEVA ISM
• MS Office and Power Bi
• Aveva PML and .Net

Interested applicants are welcome to submit your resume to [email protected]

EA Personnel: R1107675

Agency No.: 07C3676

• MNC, North, 5 days
• $2100 - $2500 basic, allowance
• Performance bonus
• On-the-job training is provided

Job scope

• Create custom probe card designs based on cantilever technology to ensure optimal wafer-level testing performance.
• Conduct feasibility studies on new designs,preparing layouts and designs for client approval in a timely manner.
• Ensure on-time delivery of designs by managing project timelines and maintaining high-quality standards in all design work.
• Work with local and international engineering teams to facilitate smooth communication and technical alighnment.
• Actively contribute ideas for improving design processes and methodologies, focusing on enhancing efficiency and product quality.
• Assist Senior Engineers with other design and engineering related tasks, gaining exposure to advanced technical challenges and solutions.

Requirements:

• Possess minimum a Diploma in Electronics, Electrical,Mechanical Engineering, or related field.
• 1 year of relevant experience in probe card design, hardware board-level design,semiconductor test, or related areas.
• Candidates with relevant qualifications but no experience can apply. On-the-job training is provided.
• Proficient in Autocad for drafting and schematic interpretation.
• Basic understanding of semiconductor design and testing is an advantage.
• Able to work overtime when required to meet project deadlines.

Interested applicants, please send your resume to [email protected]

Job Scope:

• Provide troubleshooting and technical assistance for automation systems and software
• Monitor and maintain automation systems to ensure optimal performance and reliability
• Create and update technical documentation, including user manuals and support guides
• Collaborate with engineering teams to implement system improvements and upgrades
• Conduct training sessions for users on automation tools and systems
• Manage and resolve incidents related to automation processes
• Analyze system performance data to identify areas for improvement
• Ensure compliance with industry standards and regulations
• Assist in testing new automation solutions and technologies before deployment

Requirements:

• Diploma in Electrical Engineering/Computer Engineering from a recognized local polytechnics
• Relevant site co-ordination experience in LTA/SMRT projects with WSH Safety Co-Ordinator Level B certification.
• Strong interpersonal skill with a positive attitude.
• A leader who can work under minimum supervision, be independent and pro-active.
• A team player who is confident to lead, supervise and assist the various Project Manager in all sites related activities.
• A multitasker who thrives in a fast-paced environment with tight project schedule.
• Confident in communicating with LTA/SMRT and various SWC.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Cooling Equipment, Chiller
• High Variable bonus + Mobile Allowance + Other Allowance
• Work-Life Balance
• Yearly appraisals salary adjustment（Based on performance)
• Singlife Medical Insurance Benefits

Responsibilities:

• Work closely with customers and engineers to assess equipment needs, and to determine system requirements.
• Prepare project document submissions, and support other team members in execution.
• Performing quality control tasks on equipment, budgets, schedules, plans, and personnel performance and reporting on the project's status.
• Coordinating, cooperating and communicating with team members and other project participants and collaborating to create more efficient project methods and to maintain the project's profitability.
• Ensuring the project's compliance with the applicable codes, safety practices, policies, performance standards, and specifications.

Requirements:

• Diploma / Degree in Mechanical Engineering or related field
• Prefer candidate with min 2 years experience in dealing with ACMV, Equipment Installation and etc
• Prefer candidate with Class 3 driving license.

*Only shortlisted candidates would be notified**

Job requirment

• Provide Level 2 support for IBM AIX operating systems and related technologies.
• Perform system administration tasks such as installation, configuration, and maintenance of AIX servers.
• Proficient in virtualization technologies such as SR-IOV,SEA, PowerVM Virtual I/O Server (VIOS), HACMP,Spectrum Scale(GPFS)
• Identify and implement security measures to protect AIX systems from potential threats.

Ability to work independently and as part of a team.

Job Description:

• Manage and perform engineering/design execution, planning, and interface and ensure that activities are completed on schedule and within the budget.
• Prepare project execution and quality plans, projects plan of works, initial projects safety review, initial projects environmental review, and project control system.
• Coordinate with project managers, discipline engineers, designers, drafters and field staff, and ensure consistency in execution of project activities.
• Organize and conduct project meetings, technical, and progress reviews.
• Initiate and complete projects close-out and archiving.
• Develops project objectives by reviewing project proposals and plans; conferring with management.
• Determines project responsibilities by identifying project phases and elements; assigning personnel to phases and elements; reviewing bids from contractors.
• Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates.
• Confirms product performance by designing and conducting tests.
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.
• Maintains project schedule by monitoring project progress; coordinating activities; resolving problems.
• Controls project plan by reviewing design, specifications, and plan and schedule changes; recommending actions.
• Controls project costs by approving expenditures; administering contractor contracts.
• Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions.
• Maintains safe and clean working environment by enforcing procedures, rules, and regulations.
• Maintains project data base by writing computer programs; entering and backing up data.
• Ad- hoc duties assigned

Requirements

• Degree in Civil / Structural Engineering recognised by the Professional Engineer Board
• At least 3 - 5 year(s) of relevant experiences in construction industry
• Knowledge of Autocad would be an advantage
• Good communicative skills, able to interact with people of all levels and teamwork
• 5.5 days work week

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Assistant Manager/Manager (Maintenance/Chemical Plant)
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $7,000 + Company Transport/Transport Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Develop and implement department procedures, ensuring compliance with safety regulations and standards.
• Oversee and coordinate the daily engineering operations, including conducting routine inspections and maintenance of machinery.
• Manage the maintenance budget, ensuring efficient allocation of resources.
• Supervise engineering staff, including hiring, training, and performance management.
• Prepare preventative and maintenance schedules.
• Identify and address potential issues before they result in equipment failure or downtime.
• Collaborate with other departments to prioritize maintenance needs and manage work orders.
• Manage inventory of maintenance equipment.
• Prepare and present reports on maintenance operations and costs.
• Keep abreast of advancements in maintenance and repair technologies.

APPLY NOW!!!

• Minimum Diploma or Degree in Mechanical Engineering, Chemistry, or a related field.
• At least 5 years of relevant working experience in the chemical industry, with hands-on experience managing engineering teams and plant operations.
• Strong knowledge of chemical plant management, and Environment, Safety, and Health (ESH) regulations and compliance standards.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69359 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Validation Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 8.30 AM – 6 PM)
• Salary Package: Basic Salary up to $6,000 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Assist Quality and Validation Manager Asia to complete the tasks on time with good quality.
• Responsible for the successful execution of the Validation functions for customer projects, as required – Quality, Cost, and Time.
• Responsible for driving and supporting the project team for projects where validation is required and ensuring execution complies with company's standards.
• Provide training on qualification activities.
• Responsible for maintaining qualification documentation standards and procedures.
• Create and maintain qualification/validation documentation from the design phase of projects for mechanical, software, and hardware parts.
• Lead the qualification/validation activities of projects (risk analysis, protocol drafting, and test execution during FAT/SAT) internally and at our partners' sites (approximately 20% of the time on travel throughout the year).
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 2 years of working experience in quality or validation of automated systems (mechanical, software, hardware) or equivalent
• Prior work experience in control systems design is advantageous
• Excellent understanding of assembly, test & debug procedures

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69403 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description:

• Configure physical network devices during capacity buildouts
• Set up automated monitoring of physical network devices
• Set up automated alerting based on monitoring for physical network devices
• Write automation scripts to safely update the configuration of physical network devices
• Cut tickets to Data Centre operations for a variety of tasks: check cable, replace a line card, replace a faulty device, decommission a device, etc
• Update the firmware (operating system) of physical network devices
• Maintain the logical access security for physical network devices
• Responds to live site incidents involving physical network devices
• Provide evidence to auditors on the logical security of physical network devices

Requirements:

• Diploma in Computer Science/Engineering or equivalent
• Preferably 3 years or more relevant IT Implementation and maintenance support experience
• Preferably 3 years or more of Networking Engineering experience working with Layer 2 protocols, Layer 3 networking with IP, as well as routing protocols such as OSPF/IS-IS, BGP, and MPLS
• Experience troubleshooting across a variety of networking platforms including, but not limited to, Cisco, Dell, Palo Alto, Fortigate and Arista
• Strong scripting skills (Python, PowerShell and C# are preferred, but not a strict requirement) for automating day-to-day tasks are a strong plus

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.