Responsibilities:

1) Execute pre-test preparation tasks, including:

• Interpret DWO, its sample descriptions, its reference codes, the standard test methods requested, deviations from standard test method (if any) and acceptance criteria;
• Prepare draft reports / raw data sheets to Technicians;
• Cascade the instructions to the Technicians via draft reports / written instructions / Technique Sheets

2) Engage customers to build & maintain good relationships with customers, including:

• Understand customers' testing objectives;
• Advise customers if the acceptance criteria are reasonable;
• Advise customers on how to resolve issues with their processes.

3) Familarise and understand the tools used for the maintenance of quality in the laboratory:

• Participate in the preventive maintenance of departmental test equipment;
• Participate in the periodic monitoring and standardization/verification of departmental test equipment;
• Participate in the calibration of departmental test equipment.

4) Under heavy load, assist with the execution of tests, including:

• Carry out tests according to the written procedures;
• Provide adequate housekeeping while carrying out tests;
• Record raw data into worksheets / draft reports;
• Transcribe test results to official test reports;
• Recognise & escalate potential invalid test results;
• Assess & recommend test validity to the senior.

Job Requirements:

• Degree in Mechanical Engineering or Materials Science or related Science Field
• 1 or 2 years of working experience in Manufacturing and QA/QC industries would be an advantage, i.e. industrial attachment, previous job
• Knowledge of ISO 17025 is an added advantage but not compulsory
• Able to multi-task and highly proficient at work.
• Able to work independently with minimum supervision
• Customer-oriented and willing to go the extra mile

The L1 System Engineer is responsible for: • To provide 24 x 7 support for Data Center running on 12 hours shift • Assisting the Customer in the verification, isolation and/or provision of a temporary work around for the incident/problem logged. • Resolving the incident/problem onsite. • Escalating unsolvable problems and service requests to the System and/or Software Engineer and reporting the escalation to the Project Manager. • Generating the relevant administrative records and reports. • Introducing and integrating new technologies into existing environments. • Applying operating system updates, patches, and configuration changes. • Adding, removing, or updating user account information, resetting passwords, etc. • Answering technical queries • Maintaining the configuration of the system. • To implement Service Request and Change Request • Contacting OEM/Vendor for technical support

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

We regret that only shortlisted candidates will be notified.

Responsibilities

• Responsible for overseeing overall building maintenance and security operation includes conducting inspection, coordinating maintenance/ improvement programs and projects, compile data for reporting and forecasting future needs and costs.
• Assist in operations and implementation of facilities management programmes, including formulating programmes relating to routine and periodic maintenance works, plan and implement the cyclical replacement/ enhancement works.
• Support Manager for preparation of operation and capital budget, monitoring and control to ensure completion within time and cost objectives.
• Assist in contract administration and management, including calling, evaluation, negotiation and award recommendation of tenders/ quotations.
• Support the effective planning and management of activities of outsourced service partners, providing supervision and controlling their performance.
• Coordinate with internal engineers and the appointed managing agent to ensure maintenance of all systems are being carried out according to plan and contracted scope of work and manage facilities related to timely repair and replacement work.
• Assist to investigate, develop and implement solutions, trouble shoot on day-to-day operational problems of facilities and building.
• Assist to develop and implement policies, protocol and procedures to maintain full compliance with the prevailing legislative acts and regulatory requirements.
• Conduct periodical quality control inspections for potential safety hazards and unsafe conditions, initiate corrective measures to maintain a secure, safe and healthy work environment (the inspections should include after office hours if need be).
• Attend to all emergency/crisis on and off hours and provide a timely response to incidents as they arise and assist in emergency management and contingency planning.
• Assist Manager to deliver customers facilities requests.
• Assist in internal and external audits.
• Any task which may be assigned from time to time

Requirements

• Degree/ Diploma in Electrical/ Mechanical/ Facilities Management or equivalent
• Preferably with 5 years of relevant working experience. Prior experience in critical facilities such as Data Centre would be an added advantage.
• Well versed in all facets of facilities management with general knowledge of all real estate functions including planning, development, asset management and project management.
• Possess good interpersonal and communication skills, able to work under pressure in a fast paced and dynamic environment.
  Computer literate with knowledge of MS Word, Excel and PowerPoint
• Job Reference: QY868785

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

Tel: 6950 9754

EA Registration Number: R22110899

EA License number: 02C4944

EA Personnel: Celeste Wong Xin Yann

Responsibilities:

• Produces complete controls solutions and electrical design packages based on customer specification, and standardized design practices.
• Formulates and produces complete electrical design package such as detailed schematics, cable routing diagrams, panel layouts, bills of materials, and purchase of material.
• Designs and implements HMI or PLC programs specific to customer and project requirements.
• On site testing and commissioning (local & overseas).
• Document control, project monitoring and provide solution for any technical and functional problems.

Requirements:

• Degree in Control & Instrumentation/Electrical/IT Engineering or equivalent discipline.
• Strong trouble-shooting, problem-solving skills.
• Knowledge of PLCs, HMI and VFD would be an advantage.

Responsibilities

• Participate in new product development project from concept to launch
• Support and improve existing product lines
• Support activities to reduce production cost, lead-time and improve product reliability and quality
• Collaborate with external partners in joint product development projects
• Manage project scope, timelines, budgets, product specifications, production schedules, and any other deliverables
• Establish engineering specifications and production processes to meet technical, functional and quality requirements
• Coordinate and support manufacturing of prototypes and products to ensure reliability and quality of product
• Develop and perform assembly and test procedures for product according to specifications
• Identify and resolve all issues effectively to achieve all objectives
• Ensure proper documentation (including manuals) of all required information for product/projects
• Support product installations and any necessary diagnoses, troubleshooting, service, and repair
• Provide product training and support internally and distributors

Requirements

• Bachelor’s degree in Electronics, Electrical or System related Engineering
• 3-5 years relevant experience in product development
• A good team player with strong interpersonal communication skill
• Self-motivated and able to take ownership of appointed task to follow through to completion with little supervision
• Familiar with programming languages C and C++
• Knowledge on Windows OS
• Basic understanding on schematic and Gerber
• Working location is in Jurong East
• Singaporeans Only

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Liaising with clients and reporting on progress to staff and the public

Supervising construction workers and hiring subcontractors

Buying materials for each phase of the project

Monitoring build costs and project progress

Conducting quality and safety inspections

Checking and preparing site reports, designs and drawings

Maintaining quality control checks

Motivating the workforce

Day to day problem solving and dealing with any issues that arise

Using specialist project management computer programmes

Working on-site in all weathers, at clients’ businesses or in a site office.

Role Summary/Purpose

Field Service Engineer is a field-based role which requires the incumbent to travel to customer sites across the APAC region to provide specialist installation and maintenance support as directed by his Resource Manager. The role will report to the Resource Manager for SEA region.

Essential Responsibilities

As a Baker Hughes Field Service Engineer you will represent Baker Hughes both technically and professionally to ensure that equipment is installed, maintained and started properly. Your key responsibilities will include:

• Providing on-site technical direction to skilled labor during during Baker Hughes/GE Aero derivatives Gas Turbine (LM2500) /Heavy Duty Gas Turbines/Nuovo Pignone Compressors (BCL Compressors) /Pumps/Auxiliaries Installation, Maintenance and Commissioning activities on Customer Owned Sites in remote Shipyards, Oilfields, Industrial Facilities and LNG Plant.
• Experienced in Baker Hughes/GE Aero derivatives Gas Turbine (LM2500) /Heavy Duty Gas Turbines/Nuovo Pignone Compressors (BCL Compressors) /Pumps/Auxiliaries maintenance and services inclusive of minor inspections, major inspections, rebuilds, and refurbishment of the equipments.
• Experienced in Installation, Maintenance, Commissioning Site Activities with proper Customer/Company Schedule Targets Mindset following strictly Quality and HSE Rules.
• Utilizing Problem Solving Skills, Engineering Instructions, Drawings, and Process Instructions during Gas Turbines Commissioning and Start-up Activities.
• Possessing the Technical Capability to troubleshoot and provide routine maintenance checkout for Gas Turbines Products.
• Preparation of job-planning documents based to Assignment’s Scope of Work.
• Communicating effectively with Site Manager, Lead FSE, Service / Installation / Project Managers and Site Leaders/Site manager on job planning and execution and with Resource Managers regarding site arrivals, departures and job progression.
• Providing input for Daily, Weekly & Final report for outages and installations projects.
• Preparing timely and accurate technical reports for Customer records and as Reference for future Outages.
• Actively participate to customer and/or contractor meeting and be promoter on their recurrence and following action plan.
• Establish through the immediate Report after the Daily HSE Tool Box Talking (mandatory for Baker Hughes/Contractor personnel) the critical activity tasks and remark any HSE aspect to be followed.
• Have knowledge of all Quality procedures and documentation applicable to specific activities and ensure they are properly followed and updated.
• Ensure that Red Flag Review process for New Units Installation is followed and applied.
• Ensure Site Quality Check List/Job Cards/Field Procedure are followed and properly signed.
• Ensure reports and drawings “marked-up” are completed.
• Ensure all RCA and Lesson Learned are addressed properly.
• Ensure all Non-Conformity (technical and materials) are properly addressed using Baker Hughes e-tools and follow up till resolution.
• Ensure compliance with local/current legislation, requests & requirements present in the site Safety Manual.
• Willing to actively participate in NPI (New product Introduction) training to acquire Multiskilling.

Qualifications/Requirements

• Engineering Degree/High School Technical Diploma or equivalent knowledge or at least five (5) years of work experience.
• Significant work experience, preferably in the Energy or Oil & Gas industry.
• Strong knowledge on Baker Hughes/GE Aeroderivates Gas Turbine/Compressors/Auxiliaries installation & maintenance philosophy.
• Fluent oral and written English.
• Strong customer service orientation and the ability to communicate effectively with a range of stakeholders.
• Proven ability to work efficiently without direct supervision.
• Health, Safety and Environmental mindset and compliance.

Responsibilities

• Lead and manage the supply chain teams in the region including Customer Service, Planning, Warehousing and Logistics
• Execute with excellence the global supply chain vision and strategy
• Lead/Participate in supply related projects
• Reinforce customer intimacy, lead regional S&OP, and enhance Service Level Offering
• Work with team to generate cost savings and enable security of supply in collaboration with technology and sales and deliver results in these areas
• Ascertain with Regulatory Affairs import and export operations comply with local and respective country regulations
• Deliver appropriate customer service for the defined customer segmentation
• Owner of the regional S&OP process including the demand, supply and combined reviews
• Develop and maintain effective collaboration with 3PL, ensure effective support of our operations requirements, KPIs and meeting of business targets
• Ensure compliance with all laws and regulations regarding supply chain operations such as transportation, including hazardous materials, shipping management & others
• Responsible for overseeing the inventory management process

Requirements

• Bachelor’s Degree required in Supply Chain, Operations or related field
• At least 8 years of experience in supply chain and sourcing, with 5 years of management experience
• Chemical industry experience will be a plus
• Strong data management skills and supply chain management

Account Manager

Kerwin Tan Kai Bin (R1331624)

[email protected]

EA16S8107

Responsibilities:

• Handle existing customers’ account and look for new customers
• Handling enquiry, negotiating price, preparing quotation, order and delivery
• Support distributors in market development, products knowledge and commercial requirement
• To review the distributor’s performance periodically and make recommendations for sales improvements and distributors’ motivation
• Participate or visit trade fairs worldwide
• Identifying & generating new business opportunities within assigned territory
• Visit clients of existing markets and potential customers in new market
• Working closely with IP Lawyer and Clients for taking action against infringer of company’s trademarks and products
• Perform any other duties or ad hoc projects assigned

Requirement:

• Minimum Bachelor Degree in Business studies or Marketing.
• Occasional travelling to oversea are required.
• Resourceful, meticulous and independent
• Energetic with high level of initiative and dedication
• Possess good communication and strong analytical skills

How to Apply:

Interested candidates are invited to forward their CVs in MS Word format to [email protected]

Reg No: R1549345
Triton AI Pte Ltd
License No: 21C0661

Job Responsibilities:

1. Responsible for monitoring, optimizing, updating, maintaining, and troubleshooting online games, web applications, and other systems;
2. Develop and optimize daily operations tools;
3. Manage and improve the operations monitoring platform and release platform;
4. Participate in daily operations on global projects and major cloud service platforms;
5. Participate in the construction of the company's automated operations system, apply new technologies, optimize the operations architecture, and improve operational efficiency;
6. Complete other related tasks as assigned by leadership.

Job Requirements:

1. Bachelor's degree and above in computer-related fields;
2. Minimum of 3 years of hands-on experience in DevOps, both in cloud and on-premise environments;
3. Proficiency in using one or more - Shell/Python/Go, with strong Linux performance tuning skills, and the ability and awareness to troubleshoot independently;
4. Proficient in operating the Linux operating system, familiar with the installation, configuration, and usage of common operational tools and services under Linux, including but not limited to Tomcat, Nginx, Rsync, Ansible, Zabbix, Prometheus, ELK, etc;
5. Familiar with CI/CD processes and common toolchains such as Gitlab, Jenkins, Ansible, K8S, with at least one year of experience in game and web application operations;
6. Proficient in reading and writing English, familiar with automated operations development;
7. Responsible and diligent at work, with strong communication and coordination skills, a team player, stress management, and occasional night-time maintenance may be required.

Role Summary/Purpose

The Field Services Engineer &Technical Advising role is a field-based role which requires the incumbent to travel to customer sites across the APAC region to provide specialist installation and maintenance support as directed by his Resource Manager. The role will report to the Resource Manager for SEA region.

Essential Responsibilities

As a Baker Hughes Lead Field Service Engineer – Instrumentation & Controls you will represent Baker Hughes both technically and professionally to ensure that equipment is installed, maintained and started properly. Your key responsibilities will include:

• Lead Field Service Engineer – Instrumentation & Controls you are responsible to support installation services for Baker Hughes/GE Aero derivatives Gas Turbine (LM2500) /Heavy Duty Gas Turbines/Nuovo Pignone Compressors (BCL Compressors) /Pumps/Auxiliaries in customer Owned Sites in remote Shipyards, Oilfields, Industrial Facilities and LNG Plant.
• Minimum 5 years of experience as Lead Control support for outages, shutdowns, minor and major maintenance, start up and commissioning related experience and worked on Baker Hughes/GE Baker Hughes/GE Aero derivatives Gas Turbine (LM2500) /Heavy Duty Gas Turbines/Nuovo Pignone Compressors (BCL Compressors) /Pumps/Auxiliaries packages in Oil & Gas platforms and auxiliaries such as pumps and compressors.
• Able to lead a team of Control Engineer and electrical and instrumentation technicians for related activities such as outages, services, installation, start up and commissioning support.
• Good knowledge of Gas Turbine Control Systems and Auxiliary Systems including but not limited to GE Mark Vie, Woodward Netcon, Micronet, Micronet Plus, & PLC Allen Bradley controls systems.
• Able to do Electrical & Instrumentations tasks besides the managing the commissioning of equipment with the current control systems.
• Provide customers with technical direction and support on the calibration, repair and operation of instrumentation and controls equipment.
• Implement conversions, modifications and upgrades to gas turbine controls systems including software upgrades and major retrofits.
• Troubleshoots, reinstalls, tests, evaluates, calibrates, and maintains instruments or devices upon completion of repairs.
• Records and reports abnormal function or out of tolerance conditions of equipment and initiates corrective action and documentation.
• Read and interpret electrical/mechanical flow and instrument diagrams
• Reading Installation, Maintenance, Commissioning Site Activities with proper Customer/Company Schedule Targets Mindset following strictly Quality and HSE Rules.
• Utilizing Problem Solving Skills, Engineering Instructions, Drawings, and Process Instructions during Gas Turbines Commissioning and Start-up Activities.
• Possessing the Technical Capability to troubleshoot and provide routine maintenance checkout for Gas Turbines Products.
• Preparation of job-planning documents based to Assignment’s Scope of Work.
• Communicating effectively with Service / Installation / Project Managers and Site Leaders/Site manager on job planning and execution and with Resource Managers regarding site arrivals, departures and job progression.
• Providing input for Daily, Weekly & Final report for outages and installations projects.
• Preparing timely and accurate technical reports for Customer records and as Reference for future Outages.
• Actively participate to customer and/or contractor meeting and be promoter on their recurrence and following action plan.
• Establish through the immediate Report after the Daily HSE Tool Box Talking (mandatory for Baker Hughes /Contractor personnel) the critical activity tasks and remark any HSE aspect to be followed.
• Have knowledge of all Quality procedures and documentation applicable to specific activities and ensure they are properly followed and updated.
• Ensure that Red Flag Review process for New Units Installation is followed and applied.
• Ensure Site Quality Check List/Job Cards/Field Procedure are followed and properly signed.
• Ensure reports and drawings “marked-up” are completed.
• Ensure all RCA and Lesson Learned are addressed properly.
• Ensure all Non-Conformity (technical and materials) are properly addressed using BHGE e-tools and follow up till resolution.
• Ensure compliance with local/current legislation, requests & requirements present in the site Safety Manual.
• Willing to actively participate in NPI (New product Introduction) training to acquire Multiskilling.

Qualifications/Requirements

• Engineering Degree/High School Technical Diploma or equivalent knowledge or at least Five (5) years of work experience.
• Significant work experience, preferably in the Energy or Oil & Gas industry.
• Demonstrated experience as lead field engineer.
• Strong knowledge on Baker Hughes/GE Aeroderivates Gas Turbine/Heavy Duty Gas Turbines/Steam Turbines/Compressors/Auxiliaries installation & maintenance philosophy.
• Fluent oral and written English.
• Strong customer service orientation and the ability to communicate effectively with a range of stakeholders.
• Proven ability to work efficiently without direct supervision.
• Health, Safety and Environmental mindset and compliance.

Job Description

• Assist in maintaining of building facilities on timely - servicing, inspection, equipment re-certification etc
• Liaise and co-ordinate with subcontractors for maintenance works
• To conduct daily facilities inspection to ensure all preventive maintenance works are completed and identify any defect if any.
• Determine and analyse the cause of defects, breakdowns and faults & provide suggestions to prevent any future occurrences.
• Populate and ensure monthly reports are accurately maintained.
• Follow all regulations and safety procedures.
• Plan, schedule and follow up on outstanding defects works
• Attend to complaints and troubleshooting faults.
• Daily opening and closing check
• Assist in setting up the AV system for meetings & events
• Compile and maintain service reports, Licenses / Certificates on site.
• Prepare and submit Certificate of Completion for Maintenance Works and Services monthly, and prepare monthly claims.
• Any other duties as assigned

Job Requirements

• Degree or Diploma from recognised tertiary establishment in Facility
• Management / Mechanical Engineering/ Electrical Engineering/ Building Services
• 3 years relevant experience role in Facilities Operation in FM service provider
• FSM /other FM and Safety related certificates will have added advantage
• Resourceful, team player and able to work independently
• Must be able to work and / or response after office hours and weekends
• Good interpersonal and problem-solving skills
• Can start work in immediately will be advantage

· Lead commissioning activities for Electrical, Instrumentation and Hydraulic discipline for the Novel Turret system

· Support Programming of subsea control systems

· Lead PLC Programming of Turret control systems

· Actively drive the progress and quality for the Turret system commissioning activities for Electrical, Instrumentation and Hydraulic disciplines

· Follow-up design, construction and testing activities for the Electrical, Instrumentation and Hydraulic disciplines

· Responsible for design and Commissioning of the Electrical, Instrumentation and Hydraulic equipment in the Turret system

o Develop and contribute with input to philosophies and design specifications

o Ensure the design meets regulatory, class, client and corporate requirements.

o Perform pre- and detail engineering for Electrical, Instrumentation and Hydraulic systems

o Develop material take-off and have site control of the commissioning spares

o Turret system equipment meet EEHA inspection requirements.

· Coordinate, plan and execute Electrical, Instrumentation & Hydraulic system commissioning activities and ensure a logical sequence with timely execution.

· Review of relevant vendor documentation to ensure compliance with project requirements as required

· Proactively support and cooperate with all commissioning disciplines in Barossa Project to meet project schedule and quality requirement.

The holder of this position has the necessary authorities to carry out the responsibilities stated above.

• Well Established Company
• Basic $ 4000 - $ 5000 + Transport Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Joo Koon
• Working hours : 8.30am – 5.30pm
• Working days : Monday to Friday

Job Responsibilities:

• Technical review on new project orders and order assignments to technical engineer & drafter team
• To manage and ensure timely submission of engineering documents i.e. Control Schematic Drawing, General Assembly Drawing, Wiring Diagram, Nameplate Drawing, Test Procedure, Data Sheet and etc
• To review all project engineering documents prepared by technical engineer & drafter team before submitting to client
• Manage engineering change function and ensure engineering documents are updated accordingly
• Provide advice and guidance to technical engineer & drafter team for any technical queries and To support other ops team on various aspects of technical/engineering matters
• To check and make recommendations based on common industrial engineering practice, where necessary
• To provide and implement cost effective and best engineering solutions for project in order to stay competitive
• To provide sound engineering practice and engineering calculation where applicable in a timely manner to meet project timeline
• To review international standards and/or project specifications for product compliance. i.e. ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards or other industrial standards related to Valve Automation and/or instrumentation
• Providing field support for the customers to resolve after-sales technical issues or technical clarifications
• To attend internal/external kick off Meeting (KOM) when required
• Travel along with Technicians to installation base and sites if situation arise
• To assist manager to lead the department’s improvement programs and/or process efficiency initiatives
• To assist manager in maintaining and updating the department's Standard Operating Procedure
• To carry out Engineering Personnel annual Performance review to ensure competency and give counselling when required
• Support new employee orientation by providing brief Engineering department process flow training
• Support and Guide the Operation department in resolving aftermarket technical issues such as Product Design changes / Fault Finding / Supplier Discrepancies
• Performs additional related duties as requested or required

Requirements:

• Bachelor’s Degree / Diploma in Mechanical/Instrumentation or equivalent
• Minimum 6 to 8 years supervisory experience in Valve Automation and/or instrumentation background, preferably in the Valves & Actuators field for Oil & Gas Market
• Conversant with ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards or other industrial standards related to Valve Automation and/or instrumentation
• Possess a strong knowledge in Pneumatic and Hydraulic circuits

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities

• Design and project management of mechanical/electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc.
• Engineer shall be expected to carry out design work, attendance at consultants’ meetings and management of the relevant M&E aspects of the construction activities.

Requirements

• Bachelor degree holder in mechanical/electrical engineering
• At least 2 years of experience under consultancy culture
• Design and implementation, able to attend meetings independently
• Able to multi-task and work in a fast-paced environment
• Possess initiative, drive, and ability to work independently
• Good interpersonal/communicational skills
• Experience as a consulting in the construction industry is a pre-requisite
• Working schedule: 4.5 days
• Mondays to Thursdays (8am-6pm/9am-7pm), Fridays (8am-12pm/9am-1pm)
• Office location: Central

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

1. To facilitate project/product application feasibility studies for Axis-Tec customizations in test and assembly automation and equipment.

2. Representing the team and interpreting the customer’s or business partner’s needs.

3. Establish design specifications and generate project technical proposals for the project management team.

4. Estimate pre-bom costing for the project management team.

5. Perform a proof-of-concept study to ensure the robustness of the original design concept and the components or equipment being selected.

6. Manage the procurement of system hardware, define project costs, and control the total spending budget for the project.

7. Manage project risks to ensure success.

8. Implement ad-hoc activities and interventions wherever gaps or issues arise during the project.

9. Work closely with the Design and Manufacturing teams to ensure the projects are delivered in line with design specifications, goals, schedules, and quality standards.

10. The solution sourcing process must be aggressive in terms of project schedules or technical challenges.

11. Maintain regular communication with the Process Application Manager regarding the development projects.

12. Support the Manufacturing team in case of issues during assembly and integration.

JOB QUALIFICATIONS:

· Degree in Mechanical, Electronics, Electrical, Mechatronics Engineering or equivalent

· Minimum 2 years of relevant experience in test and automation design or test and process engineering.

· Strong Interested in technical development and support.

· A team player who is responsible and committed to working in both collaborative environments and independently in a scheduled Project-driven environment.

· Experience in technical support will be an added advantage.

Job posting done by Sheralynn Tjioe, Head of Interim and Contracting Solutions (Technology) Recruitment at Kerry Consulting

Email: [email protected]

My Client is a leading stable firm in Singapore.

Job Title: Data Warehouse Support Engineer - 1 Year Contract (with 12 days Annual Leave)

Job Description: We are currently looking for a skilled Datawarehouse Support Engineer to join our team on a one-year contract basis. As a valued member of the IT BAU team, you will be instrumental in maintaining the Enterprise Datawarehouse (EDW) system, ensuring its availability, and facilitating timely delivery of datamarts to various business units, including Finance, regulatory, and Campaign.

Key Responsibilities:

• Provide continuous support for the Enterprise Datawarehouse (EDW) system, ensuring its stability and meeting Service Level Indicators (SLIs) for system availability and batch deliverables.
• Address inquiries from different business units promptly, offering timely updates on production status and progress in issue resolution.
• Optimize applications and systems to enhance performance and accommodate higher volume throughput.
• Review technical and functional solutions to ensure alignment with IT standards.
• Perform impact analysis for enhancements/projects affecting supported systems.
• Identify underlying issues, propose solutions, and ensure timely resolution within SLAs.
• Assist in software/platform/database upgrades for relevant systems.
• Collaborate with delivery teams to ensure smooth transitions from projects/enhancements to BAU mode.
• Effectively manage incidents, problems, and service outages.
• Participate in Disaster Recovery and Business Continuity exercises.
• Monitor server performance, capacity, utilization, and health.
• Work closely with cross-functional teams within IT and Business to drive independent outcomes.

To Apply

For a confidential chat regarding your next Technology role, please submit your resume (in MS Words format) to Sheralynn Tjioe at [email protected], quoting the job title. We regret that only shortlisted candidates will be contacted.

Registration No.: R1878306

License No.: 16S8060

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

Team Introduction

Ad Data is the cornerstone of every business decision that millions of advertisers make every day on Bytedance. Therefore, we are tasked with innovating on daily basis to create and maintain complex systems at large scale and continue expanding the capacity to better serve advertisers growing at exponential pace.

You will share in the ownership of the technical vision and direction for advanced Ad Data products. You will be a part of a team of top notch technical professionals developing scalable systems and with a focus on sustained operational excellence. Members of this team will be challenged to innovate using cutting edge technologies. We are looking for people who are highly motivated by aiming for the highest, moving fast, and changing the way customers use data to drive profitability.

Responsibilities

- Work with product managers and data analysts to design data-related products.

- Communicate with engineers, product managers and product analysts to understand data needs.

- Buildup data expertise and own data quality for allocated areas.

- Design, build and launch new data ETL processes in production.

- Support existing streaming and batch system in production, solve the on-call issues.

- Define and manage SLA for all data sets in allocated areas.

- Work with data infrastructure to triage infra issues and drive to resolution.

- Support daily project management, assist junior engineers in business and technical problems.

Qualifications

- Bachelor's degree in technical field, Computer Science or Mathematics.

- At least 5 years of experience in the data warehouse space.

- At least 5 years of experience in custom ETL design, implementation and maintenance.

- At least 3 years of experience working with big data technologies such as Hadoop, Hive, Spark, etc.

- At least 3 years of experience with schema design and dimensional data modeling.

- At least 3 years of experience with SQL statements.

- Proficient in one of the programming languages such as Python, Java or C++.

- Good communication skills, including the ability to identify and communicate data driven insights.

- Ability to manage and communicate data warehouse plans with internal clients.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

A global energy-efficiency and infrastructure firm is looking for an experienced Engineering Manager to oversee the design, development, and implementation of cooling systems and industrial utilities projects. The ideal candidate will have a strong background in mechanical engineering, with a focus on cooling technologies such as HVAC, refrigeration, and industrial water systems.

Responsibilities:

• Lead the design and development of cooling systems and industrial utilities projects (including chilled water, district cooling system, airside systems etc.)
• Manage the full project lifecycle from concept to delivery, ensuring adherence to timelines, budgets, and quality standards.
• Collaborate with cross-functional teams, including R&D, Operations, Construction, and Sales, to develop innovative solutions that meet client requirements.
• Conduct feasibility studies, risk assessments, and cost-benefit analyses for proposed projects.
• Stay up-to-date with industry trends and technologies related to cooling systems and industrial utilities.
• Provide technical inputs for CAPEX and OPEX assessments
• Provide technical expertise and guidance to team members across regional offices
• Review equipment specification and ensure technical compliance

Qualifications:

• Bachelor's degree in Mechanical Engineering or any relevant disciplines
• Min. 7+ years of design expertise for cooling systems, industrial utilities, or large scale HVAC projects
• Strong technical knowledge of HVAC systems, refrigeration, industrial water systems, and related technologies.
• Proficiency in CAD software and engineering analysis tools.
• ESCO accreditation a plus
• Knowledge of regulatory requirements and safety standards for industrial engineering.

If you are interested, kindly apply with your latest CV detailing your design expertise on HVAC/cooling systems. Only shortlisted candidates will be contacted.

Main Responsibilities

• Manage and monitor all installed systems and infrastructure.
• Install, configure, test and maintain operating systems, application software and system management tools.
• Proactively ensure the highest levels of systems and infrastructure availability.
• Monitor and test application performance for potential bottlenecks, identify possible solutions, and work with developers to implement those fixes.
• Maintain security, backup, redundancy and BCP strategies.
• Participate in the design of information and operational support systems.
• Liaise with vendors and other IT personnel for problem resolution.
• Manage the VMWare environment.
• Provide enterprise-wide support to a high level of Microsoft Windows.
• Support the HPE and Hitachi environments.
• Provide support in a 24/7 environment and would require to work on-call at least 1 week every month.

Qualifications & Experience

• Bachelor’s Degree in Computer Science or relevant fields.
• Minimum 5 years of knowledge in the following technologies:

1. VMware vCenter: ESXi, SRM, VRM.
2. Security operation and technologies such as Privileged Access Management, Endpoint Protection Platform, Firewall.
3. System Monitoring.
4. Backup And Recovery.
5. Windows Server OS with good understanding of Windows AD, DNS, GPO and Failover Clustering – Having certifications will be advantageous.
6. SAN storage with good understanding of remote site replication (Knowledge of administrating Hitachi Virtual Storage Platform would be an added advantage) – Having certifications will be advantageous.

• Minimum 3 project cycles in a role of senior system engineer.
• IT System Management experience of various aspect.
• Possess initiative, positive attitude and strong passion in operation support.
• Good communication skills and able to work independently.
• Good understanding of Public Key Infrastructure and Network Access Control.
• Strong troubleshooting skills
• Have experience working with cross-functional team.
• Able to start work immediately or within a short notice (Plus).
• Preferably from an SI environment (Plus).

Responsibilities

• General administrative duties including documentation, filing & updating data, billing, collections, payments etc.
• Matching of supplier invoices with delivery orders
• Key in supplier invoices into system & Preparation of vendor GIRO/cheques payments.
• Verify Suppliers’ invoices, Claims for reimbursement and travel expenses and staff reimbursement.
• Ensure accounting entries for AP & AR are in timely manner, ensure transactions are recorded in the correct financial period.
• Reconcile vendors’ statements and make correct discrepancies
• Monitor accounts payment aging to ensure payment is in order
• Maintain all petty cash by checking and matching receipts, Petty Cash movement data entry
• Follow up on outstanding matters relating to invoices / payments
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Accounting or related studies
• Must know AP, AR, GL
• Full set of Accounts will be an advantage
• Minimum 1 year of experience
• Familiar with accounting in construction field etc.
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

BASIC REQUIREMENTS:

• Basic knowledge in QC Tools (e.g. Cp, Cpk, Fishbone Diagram, Control Chart, Check Sheet...)
• Basic knowledge in APQP tools (Control plan, PFMEA, WI and Check sheet…)
• Proven expertise in usage of MS Office and Autodesk Inventor / Autocad
• Strong problem-solving, organizational, analytical and critical thinking skills
• Strong documentation, communication (e.g. written and verbal) and interpersonal relationship skills
• Ability to interact professionally with all organizational levels

JOB DESCRIPTION

• Analyze and resolve process, machinery and quality issues
• Develop complex experiments and tests to qualify parts and manufacturing processes; analyze results, make recommendations, and develop reports
• Develop and maintain training and documentation materials (e.g. control pan, PFMEA, work instructions…)
• Executive improvement plan and assist overall production cost reduction
• Improve manufacturing processes including using engineering methods (e.g. SIX Sigma and LEAN Methods) by employing technical design skills to re-design / design and ensure equipment, tools, fixtures, etc are up to standards
• Identify, analyze and provide counter measures to solve manufacturing and quality issues
• Other incidental duties assigned by the Superior

Technical Sales Engineer/ Product Sales Engineer | Automation | 5 Days | Bukit Batok

Location: Bukit Batok Cres

Working Days: 5 Days

Working hours : 9am - 6pm

Salary : SGD2,200-3,500 (not inclusive of transport allowance, bonus/commission)

Job Responsibilities:

• Develop a thorough understanding of our complete range of product
• Responsible for preparing quotations, proposal according to customers' requirements
• Plan sales visits, customer calls
• Service existing clients and proactively identify and develop new customers and markets
• Conduct product training and presentation to customers
• Follow up on sales lead, sales orders and deliveries
• Provide application/product support to customers and internal sales team
• Provide post sale and presale application and sales support by analyzing and recommending solutions to meet customer’s needs.
• Using technical skills to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products.
• Industry: Electrical & Electronics

Requirement:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic/
• Passion for automation, with creative and adaptive approaches

Skills

• PLC programmable logic controller programming, touch panel, Control And Automation

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Responsibilities:

• Handling PC support, Laptop, Outlook, Windows, Mac
• Software and hardware troubleshooting
• Support on desktops, notebooks, printers, scanners hardware components
• Responsible for providing excellent support and timely service
• Rectify simple IT fault like cleaning of disk drives and jammed laser printers
• Install and uninstall of software from desktop PCs and laptops
• Any other ad-hoc tasks as assigned

Requirements:

• Minimum NITEC in any discipline
• No experince required
• Singapore Citizen only
• Training and certification provided

Responsibilities:

• Handling PC support, Laptop, Outlook, Windows, Mac
• Software and hardware troubleshooting
• Support on desktops, notebooks, printers, scanners hardware components
• Responsible for providing excellent support and timely service
• Rectify simple IT fault like cleaning of disk drives and jammed laser printers
• Install and uninstall of software from desktop PCs and laptops
• Any other ad-hoc tasks as assigned

Requirements:

• Minimum NITEC in any discipline
• No experince required
• Singapore Citizen only
• Training and certification provided