Day Technician

• Work Location: Jurong Island (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range : $2200 - $2500 + $200( Site Allowance )

Responsibilities:

The Day Technician is responsible for Heat Treatment Daily Operations, support shift team on Grade Change Maintenance activities and Day shift Operations.

• In charge of day-to-day operation for Heat treatment unit to ensure quality, safety and production capacity are met according to production plan.
• Lead and support GCM transition activities for HT facility, and main operation in ensuring cleaning activities are done efficiently up to company operation standard before handing over to maintenance.
• Ensure any operational issues are communicated and followed by the maintenance team by working closely with maintenance contractor and coordinator.
• Support the shift team in multiple aspects of operation consisting of off-spec PVA blending, chemical loading/unloading, chemical preparation and GCM cleaning.
• On all activities, report to shift supervisor and day supervisor to ensure daily operation are done safely and according to the requirement.
• Any other duties as assigned.

Requirements:

• NITEC or Diploma in Chemical Process Technology
• At least 3 years’ working experience as Process Technician in a chemical industry

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

• You are responsible to drive and manage the silicon Bump & package assembly suppliers, backend processes and solutions to achieve the aggressive TQRDCEB goals.
• You will work closely with package design & technology, test & product engg, production planning, quality engg & NPI teams, assembly/substrate suppliers to support new product & technology introduction activities by defining processes, monitoring systems, manage process improvements and changes.
• Provide day-to-day support to bump and assembly suppliers & internal planning, product and test engineering teams.
• Plan, drive & implement improvement activities for continual improvement, 2nd sourcing, cost reduction & customer satisfaction.

Qualifications:

• PhD / Master / Degree in Mechanical / Electrical / Electronics Engineering with 7~12 years of relevant experience of managing advanced node silicon bumping, large body single & multi-chip (2.1/2.5/3D) package assembly, substrate & back-end suppliers and processes.
• Hands on experience in Product Life-Cycle Management - creating & maintaining Bill of Material structure, Process Documentation, Process Change Notification etc.
• Good team player, result oriented individual, experienced in project management, failure analysis tools, techniques and TQM. Good analytical, problem-solving skills. Flexible and agile.
• Sound knowledge of applicable industry standards, quality systems, regulations, knowledge of prevailing and emerging silicon package & substrate technologies, bumping and assembly processes, materials and equipment.
• Able to communicate with internal team members & external partners in various geographic locations and may required to travel from time to time at short notice.
• Experienced AutoCAD user. Knowledge of silicon & PCB fabrication, board assembly processes, are an added advantage

Job Responsiilities:

• Manage and maintain proper record & filing of all documents
• Assist with compiling monthly reports & other reports to Client
• To assist the engineering project team on site coordination
• Manage office equipment inventory
• Perform any other relevant duties as assigned

Requirement:

• Minimum GCE O-Level
• MS Office (including Powerpoint)
• Bilingual in English and Mandarin (to liaise with our Chinese workers, subcontractors and vendors)
• Minimum 2 years working experience preferably in construction industry.
• Able to work independently with minimum guidance and under pressure to meet tight deadlines

Work Location: Central

Working Hours: Mon - Fri Office Hours

Monthly Salary: up to $4k per month (Salary commensurate with experience)

Responsibilities:

• Manage and facilitate key accounts for Temp/Contract engineering roles
• Sourcing candidates through different recruitment channels
• Compliance to all recruitment guidelines
• Build a consistent talent pipeline

Requirements:

• Diploma / Degree in Electrical / Mechanical Engineering
• About 1-2 years of experience as a Recruitment Consultant in Engineering roles preferred. Entry level candidates with Engineering background/qualifications will be considered.
• Multi-tasker, proactive, resourceful, dynamic, resilient and is driven to work in a fast-paced work environment
• Good communication and interpersonal skills
• Strong drive to succeed in placement closure
• Attainment of CEI certification will be advantageous

Interested candidates, kindly send in your resume to:

[email protected]

We regret to inform that only shortlisted candidates will be notified

SINGAPOREANS ONLY

• Meet Ship Superintend at ongoing vessel at Anchorage or PSA, inspect
• refrigeration, accommodation air-conditioner systems, package type air-
• conditioner, split type air-conditioners.
• Repair the equipment as per customer’s requirement or services or retrofit,upgrade the entire system.
• Supply brand new refrigeration and air-conditioning compressor or re-
• conditioned compressors as per buyer requirement.
• Supply, install package type air-conditioners, split type air-conditioners.
• Supply refrigeration & accommodation air-conditioner compressor parts,
• lubrication oil and refrigerant.

• Excellent communication skills
• Interpersonal skills, active listening
• 1 year previous Service desk or equivalent experience
• Attend to Phone, Email and any other online queries where applicable
• Excellent organisational skills
• 1 year previous Service desk or equivalent experience
• Managing incidents including business expectations and communication
• Strong knowledge of Microsoft based operating systems, MS Outlook and MS Office
• ITIL Knowledge will be a plus
• Comply to process and procedures
• Admiistrative tasks


Must have Talent / Skills

• Minimum a diploma in Information Technology or equivalent
• Minimum 1 year of relevant working and technical IT experience
• Pleasant disposition and good social etiquette with good spoken and written English
• Good telephony and problem solving / troubleshooting skills
• Good customer service attitude
• Process Driven
• Able to liaise with Customer for daily operations

• Minimum a diploma in Information Technology or equivalent
• Minimum 2 years of relevant working and technical IT experience
• Pleasant disposition and good social etiquette with good spoken and written English
• Good telephony and problem solving / troubleshooting skills
• Good customer service attitude

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Maintenance Engineer
• Working Location: Bukit Batok
• Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
• Salary Package: Basic salary up to $3,000 + Variable Bonus + OT
• Duration: Permanent Role

Key Responsibilities

• Create and execute regular maintenance plans for all machinery and equipment.
• Identify and fix issues with mechanical, electrical, and pneumatic systems in CNC machines and other equipment.
• Help with setting up and starting new equipment.
• Keep detailed records of all maintenance work, including logs, reports, and manuals.
• Follow all health and safety rules and foster a safe workplace.
• Spot areas for improvement and introduce changes to better equipment efficiency and reliability.
• Manage spare parts inventory and handle ordering as required.
• Cooperate closely with production, quality, and engineering teams to meet operational objectives.

APPLY NOW!!!

• Bachelor's degree or Diploma in Electrical or Mechanical Engineering or related field.
• 3-5 years in maintenance engineering in related field
• Good understanding of CNC machines (Fanuc control) and PLC programming.
• Experienced with AUTOCAD and Microsoft Office Suite.
• Willingness to work outside regular hours if necessary

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67933 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Managing end to end administration of all Network platforms (Cisco Router & switches, Cisco Wireless infra along with Infoblox DDI)

- Ability to configure and debug and do basic level trouble shooting in technology areas like routers, switches, WIFI.

- Exposure to troubleshooting of routing protocols (RIP, EIGRP, OSPF, BGP).

- Experience on switching (VLAN, VTP, RPVST, Stacking)

- Experience in Cisco Catalyst 9K, 3550, 3650 and Nexus 7K & 9K, Cisco ISR/ASR routers.

- WAN Router configuration and Troubleshooting

- Knowledge on Riverbed WAN optimizer.

- Network infrastructure management & configuration.

- Experience to handle Cisco wireless Infra, Cisco Prime and WAP devices.

- Strong knowledge on Infoblox DNS, DHCP.

- Able to take handover from project team as required.

- Regular audit of network devices and take corrective action accordingly.

- Performance Management & Optimization

- Root Cause Analysis

- Provide inputs for Capacity Planning/ Migration/ Optimization / Future upgrade strategy based on the performance trend.

- Preparation of Daily/Weekly/Monthly reports

- Coordination with multiple vendors

- Handling escalated incidents or high critical tickets.

- Plan and schedule for change management.

- Develop and maintain architecture diagrams and documents.

- Prepare SoPs and SMTD

- Good Communication skills.

Looking for suitable candidate to join us as the Assistant Engineer

- Company deals with glass and steel works.

- Able to understand and perform some drafting works will be added advantage.

- Working hours 5.5 days per week unless due to urgent site matters.

- Must be comfortable to go to site as and when required for work.

- Training and guidance will be provided.

- Positive attitude to learn and pick up new skills.

Job Description

• Perform Electrical Works including wiring and assembly work
• Set up and install Surveillance equipment and systems
• Maintain and perform troubleshooting for Surveillance equipment and systems
• Any ad-hoc duties as assigned

Requirements

• Min. Diploma in Electrical/Electronic Engineering
• Min. 2 years relevant experience
• Preferable with Class 3 driving license
• Ability to work independently and as a team-player
• Able to perform shift work and work on weekends & public holidays

Key Responsibilities:
 Analyze existing operational processes to identify inefficiencies, bottlenecks, and areas for
improvement.
 Develop and implement strategies to optimize processes, reduce waste, and increase overall
efficiency.
 Collaborate with various functional teams to streamline workflows, eliminate redundancies,
and enhance productivity.
 Lead continuous improvement initiatives across various departments.
 Facilitate brainstorming sessions and workshops to identify improvement opportunities.
 Monitor progress, track results, and adjust strategies as needed to achieve operational
excellence goals.
 Collect and analyze data related to key performance indicators (KPIs) to assess operational
performance.
 Use a structured and data-driven approach, collaborate with cross-functional teams to decide
on priorities and implement improvement initiatives.
 Prepare reports and presentations to communicate findings and recommendations to
stakeholders.
 Conduct Lean Six Sigma training to build a working knowledge of the Lean concepts and
DMAIC process.
 Coach candidates for Lean Six Sigma Yellow Belt and Green Belt.
 Provide guidance for root cause analysis to understand underlying issues affecting operational
and system performance.
 Collaborate with the site’s digital team to create and deploy performance dashboards that
track key performance indicators (KPIs) in real-time.

Qualifications:
• Bachelor’s degree in engineering, Science, or a related field. A master’s degree is a plus.
• 3+ years of experience in operational excellence, process improvement, continuous
improvement.
• Strong analytical skills and proficiency in data analysis tools and techniques.

• Certification in Lean, Six Sigma, or other operational excellence methodologies is highly
desirable.
• Excellent communication and interpersonal skills to effectively collaborate with diverse
teams and stakeholders.
• Ability to lead and facilitate workshops, training sessions, and improvement projects.
• Results-oriented mindset with a focus on achieving measurable improvements in operational
efficiency and quality.

HOYA Technosurgical, is a subsidiary of HOYA Corporation, established in Tokyo, Japan in 2013, which has the origin of PENTAX medical business unit in 1974 arising from the merger of former PENTAX medical business unit & Japan Universal Technologies, Inc. HOYA Technosurgical has set up their first overseas plant in Singapore focusing on manufacturing, research & development and sale of Chromatography Media to pharmaceutical companies.

Job Responsibilities

• Support in the setup of manufacturing facility and process documentation
• Build and train Operators in the operations of machinery and maintenance in compliance with GDP, quality and other relevant company’s standard
• Achieve efficiency, productivity, safety, and quality for assigned processes
• Propose solutions to improve productivity and lead time
• Ensure regular maintenance of machineries to prevent machine down time. Monitoring the efficient, feedback to manager and related department
• Responsible for troubleshooting of daily operations issues
• Investigate and implement preventive actions at source
• Leading of yield/productivity improvement or cost reduction project
• Support Production and Final inspection process validation activity in IQ, OQ and PQ, which the validation of mass-production equipment, with approved development specification and plans
• Other activities as assigned by the supervisor

Education Qualification:

Diploma or Bachelor in Engineering (either industrial engineering, system engineering, mechanical, chemical)

Experience:

0 – 4 years or more experience(s) in chemical or medical devices industry

Functional Competency:

• ISO9001 and 14000
• Relevant working experience in process control and manufacturing operations
• Computer literate, proficient at Microsoft office
• Effective communication in English is essential and Japanese is a plus.
• Able to collaborate well within department to execute project tasks.
• Good analytical skills
• Ability to lead and coach team members

HOYA Technosurgical, is a subsidiary of HOYA Corporation, established in Tokyo, Japan in 2013, which has the origin of PENTAX medical business unit in 1974 arising from the merger of former PENTAX medical business unit & Japan Universal Technologies, Inc. HOYA Technosurgical has setup their first overseas plant in Singapore focusing on manufacturing, research & development and sale of Chromatography Media to pharmaceutical companies.

Main Purpose of Job:

This new position is responsible for performing production-related inspection jobs, carrying out equipment and calibration, and maintaining documentation and records.

Key Duties & Responsibilities:

· Prepare the lab for ISO 9001:2015 certification audits, including laboratory equipment qualification and method validation.

· Responsible for manufacturing management and quality control (QC) based on the quality assurance system (QAS)

· Design and develop forms, work instructions and methods for testing and evaluation.

· Utilizing knowledge in engineering fields for chemical and product quality inspection.

· Ensure lab equipment/instrument calibration and maintenance are maintained as planned.

· Trend and feedback of monitoring data to relevant sections and drive for investigation and action as necessary.

· Chemical Analysis of products using ICP, X-ray diffractometer, HPLC, FTIR, particle size analyser, UV, Endotoxin test and chloride, sulfate, carbonate limit test.

· Carry out TOC, Endotoxin test, and environmental monitoring tests.

· Carry out maintenance and calibration of equipment. Maintain accurate inspection, maintenance, and calibration of records.

· Perform investigation when the test is out-of-spec or abnormal.

· Prepare validation documents and carry out the qualification of equipment etc.

· Cross function collaboration to achieve compliance with quality requirements, improvements, development and implementation of new products /processes, supporting customer complaints, etc.

· Process explanation and audit support in customer audit

· Corrective and preventive action (CAPA) support

· Perform all other duties assigned by the supervisor or manager.

Education:

Diploma in a scientific discipline or possess equivalent experience or higher.

Experience:

· Five years’ experience in a medical device or pharmaceutical laboratory environment

· Have experience with lab equipment such as HPLC, ICP, FT-IR, UV Spectrometer and environmental monitoring sample testing.

· Familiar with ISO 9001:2015 requirements.

Proficient in Microsoft Word and Excel

Working Conditions:

Work is generally performed within an indoor laboratory environment with adequate temperature. Personal protective equipment (PPE), such as a Laboratory coat, Safety shoes, Appropriate gloves, hearing protection, Respiratory Protection etc., will be required for potential exposure to hazardous chemicals and noise hazards.

Job Duties

• Reports to Project Manager.
• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programs.
• Liaise with Consultants on technical issues and coordinate the site activities with subcontractors.
• Lead a group of supervisors and ensure site progress is on schedule.
• Maintain quality standards and carry out site inspections.
• Ensure compliance with EHS requirements, regulations, and best practices throughout the project lifecycle.
• Provide technical guidance during project design and construction phases, resolving technical issues promptly and effectively.
• Support the management of manpower, materials, and equipment to optimize productivity and efficiency.

Requirements

• Recognized Degree in Civil / Structural Engineering or equivalent. PE Board recognized degree is preferred.
• At least 6 years’ experience in building or civil engineering project for senior role.
• Minimum 2 complete cycle (piling to roof) for HDB projects.
• Experience in architectural works will be an advantage.
• Technical competence.
• Knowledge in BIM/VDC is an advantage.
• Positive attitude and good team player.
• Demonstrates a sense of urgency.

Roles & Responsibilities

- To assist lead carpenter plans and lay out work from blueprints, drawings, models etc using variety carpenter''s hand tools

- To perform site visits to evaluate site condition and take measurement

- Able to understand construction drawings, assess and order material

- excellent understanding of carpentry methology and able to hands-on fabrication / installation

- able to communicate with IDs and Project team

- Able to work as a team

- Repair and perform furniture repair

- Minimum 1 or 2 year experience

Job Title: Software Engineer(Devices) - C++ & UML

Job Type: Contract - 2 Years

Job Location: East, Singapore

Job Responsibilities

The successful candidate will be responsible for the design and development of one or more devices that are part of an integrated e-payment Fare Collection System. The successful candidate will also be involved in the software development lifecycle from definition of requirements to design and development, and testing.

The activities required to be performed shall include the following:

• Requirements gathering.
• Design and develop software applications for embedded devices.
• Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP, MQTT-S) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.
• Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.
• Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual,Training Manual and others documents as required in the SDLC processes.
• Assist day-to-day application support issues.
• Liaise with users on the requirementtesting and production issues

Qualifications & Requirements:

• Degree in Electrical / Electronics / Computer Engineering / Computer Science or a relevant discipline.
• Developed software in at least one full Software Development Lifecycle.
• Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object-oriented software design and UML modelling
• Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
• Experience in multi-threading, socket programming and serial/USB communication.
• At least 5 years’ experience in object-oriented software development
• Prior experience in following areas Scrum AGILE methodology process is a plus
• Scrum AGILE methodology process
• Develop and integrate embedded devices with cloud platforms
• Strong analytical and problem-solving skills
• Good written and verbal communication skills
• Self-motivated, independent and a good team player.

This is an outsourced role.

If you are looking for an opportunity and your skills align with this job, please send your updated CV/resume (in Word format) to Mounika at [email protected].

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to RMA Groups’s PDPA and e2i’s PDPA.”

Mounika Tanuku

EA Regn. No. R22109193

EA Licence No. 93C4403

• MNC Company
• Basic $4500 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8am to 4.30pm

Job Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Work or Professional Experience:

Implementation and maintenance for the infrastructure of mission critical system.
At least 3 years’ experience in infrastructure system design, development and testing as the project basis in a large organization.
At least 1 year experiences of Financial domain in Singapore (required some common knowledge and understanding in Banking domain e.g. Access control, Change management process, Hardening)
Working experience in Japanese company
Functional or Technical Competencies

Strong experience and knowledge of implementation for following software are mandatory:Linux OS
Any Application Server software (e.g. WebLogic Server)
Strong experience and knowledge of Shell scripting.
Basic understanding of Networking(e.g. TCP/IP, Segument, Submnet)
Experience in conducting root-cause analysis and tracing to resolve issues.
Good to have experience and knowledge of Windows base Infrastructure/Middleware:
Oracle DB
HULFT
JP1AJS3 / IWA
Windows OS
SQL Server and SQL Server Reporting Service,
Active Directory

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform that only shortlisted candidates will be notified.
By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd
• RCB No. 200007268E • EA License No. 01C4394
• Reg. <R21100074> <Cheryl Thng Wei Lin>

Roles & Responsibilities

Job Responsibilities:

• To repair bins, fabricate bins, welding of the bins and support on all mechanical equipment, pumps, conveyors, gearbox and etc in plant as per schedule and upon breakdown
• To do in house welding, fabrication and plumbing works as per requirements by operation
• Attend any mechanical breakdown immediately and to run back the plant
• Installation, modification and fabrication of new equipment & machines in plant needed by operation
• To minimize equipment break down and down time, by doing proper and effective maintenance & repairs by problem identification & problem solving
• Other ad-hoc duties as assigned

Requirements

• At least 2 years of relevant experience
• Possess TIG welding experience is a plus point

Key Responsibilities:

1. Installation, corrective maintenance, and fault finding of all equipment and systems carried out by the company.

2. Attending to service calls, developing sales of security systems and equipment, quoting, and securing projects.

3. Coordinating and assisting with projects secured by the company.

4. Performing any other work assigned by the management consistent with the company's objectives.

Requirements:

• Nitec in Electrical and Electronics Engineering or its equivalent
• Minimum 5 years of related working experience
• Knowledge in electrical systems and automation in construction industry
• Strong communication, teamwork, and interpersonal skills

Senior Manager (Telecommunication)

You will collaborate with the industry leaders, stakeholders to drive innovation and growth in the vibrant digital economy.

• Lead the research, development and deployment of advanced communication technologies, including next-gen Cellular Network, IoT and next-gen networking solutions.
• Establish and maintain strategic partnerships with industry leaders, academic institutions, and other stakeholders to drive innovation and growth
• Work closely with customers to understand their needs and provide tailored solutions that meet their requirements

Requirements

• Strong knowledge in Cellular Network, IoT and next-gen networking solutions (including network waveform and management).
• Good in handling innovation, development and deployment of advanced communication technologies.
• Deep understanding of Telecommunication/ Communication protocols, waveform design and experience with Software Defined Radio platforms.
• Strong experience in partnership and collaboration - establish strategic partnership with industry leaders, academic institutions to drive innovation and growth.
• Strong in Customer Engagement and Relationship building.
• Min. 10 years of experience in the Telecommunication/ Communications industry.
• Strong leadership and Relationship building skills.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Job Description & Requirements

• Provides hands on technical expertise (SME) , senior level technical guidance to application team as necessary
• Assist and respond promptly to incident, investigate and provide temporary/permanent resolution to incidents escalated with respect to Middleware/ Operating system/ database performance, capacity, resiliency , stability,replication and other key aspects
• Researching and recommending solution that best meet business needs and enterprise operational requirements
• Provide technical support to application development teams
• Evaluate release of Middleware, Operating system, Database components and its tools to ensure entire environment is complaint with no/minimal impact

Qualifications

Understanding of protocols like HTTP/HTTPS/FTP/SFTP/AS2 etc

Programing experience in Java

Write Unix Shell & Bash Scripting

Familiarity with Linux operating system and commands

Capability to troubleshoot integration issues efficiently

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

• Design & model 3D skid system, skid structure, piping GA and other not mentioned shop drawing (cutting plan) for fabrication purpose.
• Maintain proper record for drawings and information.
• Proficient in operating CAD drawings software and drawing construction detailed design.
• Create drawings and models from written and verbal specifications obtained from Engineer.
• Reviewing and checking sketches and drawings for errors before being sent to productions, vendors, engineers, etc.
• Review drawings for completeness and accuracy.
• Systematically saving sketches and drawings on CAD library, keeping the server organized; updating files as jobs progress and revisions are made.
• Continually create, edit, and update standard details for use in projects.
• Complete task assigned by superior and performing other relevant duties when needed.

Responsibilities:

• Working with the development team, you will be responsible for the design, development, documentation, testing and delivery of the software solution for an Automatic Fare Collection (AFC) system or a high volume and performance intensive back office of an AFC system.
• Requirements gathering;
• Design, development, and maintenance of the software;
• Preparation and submission of deliverables throughout the software development lifecycles such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the standard adopted by the Authority;
• Assist the Authority with day-to-day application support issues; and
• Liaise with users on the requirement, design and testing issues.

Qualifications & Requirements:

• Recognised degree in Computer Science, IT or engineering with at least 5 years’ relevant experience in software development;
• Gone through at least one full software development lifecycle (SDLC) with experience in producing SDLC documentations;
• Extensive experience in analysing requirements, designing, development and delivering complex enterprise applications in Java/JEE, web programming on UNIX / LINUX and Windows environment;
• Proficiency with database programming such as SQL and DAO, and relevant experience with MySQL, PostgreSQL
• Experience in Spring Framework and Spring Boot;
• Experience in Software Modernization, Containerization, Microservices;
• Experience in Agile development methodology and continuous integration;
• Experience in writing Requirements Specification, Use Cases, Design Documentation, object-oriented software design and UML modelling;
• Proficiency in AWS ECS and Docker containerization, with a solid understanding of DevOps principles and best practices
• Strong analytical and problem-solving skills; and
• Good written and verbal communication skills in English.
• Self-motivated and a good team player.
• Added advantage if candidate is familiar with one or more of the following technologies:

1. Experience in Message Queues and/or Solace;
2. Experience in Cloud Computing, Kubernetes & Dockers, AWS Services like Amazon ECS Fargate, AWS RDS & Lambda;
3. Experience in Automatic Fare Collection (AFC) system;
4. Experience in EMV and Payment Card Industry Data Security Standard (PCI DSS);
5. Experience in Microsoft Active Directory
6. Experience in HTML / CSS / JavaScript / JSON
7. Experience in Secure Communications (SFTP, HTTPS, etc.)
8. Experience in Angular or equivalent
9. Experience in Java Unit Tests frameworks

Email to: [email protected] (134-002-Software Engineer (System))