Education / Experience:

o Degree in Computer Science, Computer Engineering, Information Technology

o Min 1 -3 years of relevant experience

Job Description:

o Implement, Maintain and administer network, OS, Storage and backup

o Collaborate system development tasks to include design, implementation, integration

and testing

o Provide on call, 24x7 supports for systems on a rotating basis. Implement corrective

procedures to resolve production problems and minimize unplanned system outages.

o Create and maintain programmatic and technical documentation to ensure efficient

planning and execution

o Coordinate with external parties and customers for problem resolutions

Skill Sets:

o Knowledge of IT Infrastructure such as OS, network, storage and backup

o Passionate in new Technology and keen to pick up new skillsets

o Good team player and ability to work independently

o Able to manage Stakeholders

o Candidates with one or more of the following skillsets will have an advantage:

o OS Skill in:

 Window servers( AD, DNS, Clustering)

 Linux (Redhat, Centos)

 Cluster

 Satellite

 Scripting

 Virtualization (VMware/HyperV/OVM/KVM)

o Scripting Skill in:

 Linux Bash

 Linux Python

 Red Hat Ansible

 Windows Powershell

Summary:

Designs, develops, modifies, and evaluates integrated circuits (ICs) for a battery powered consumer appliances.

Description:

Responsibilities and Duties include but not limited to:

• Implementing the solutions including schematic capture, simulation and layout verification & supervision using commercially available analog design tools.
• Verify the implementation both at the block level and top level.
• Verifying & characterizing the circuit on the bench.
• Candidate will be working on power management IC system including buck, boost, buck-boost, charge pump & LDO. Working knowledge of DC/DC converter will be advantageous.
• Candidate is also required to work with test & product engineering team to develop test program or to support product engineering.

Requirements:

• Strong foundation in analog integrated circuit design
• Bachelor or Master’s degree in Electrical/Electronic engineering
• Strong written and verbal communication skill
• A team player that can work independently using commercially available analog design tools

Bukit Batok-Singapore

Working Day: 5 Days (Mon-Fri)

Working Hour: 8.30 am - 6 pm

Job requirement

• Degree or Diploma in Civil Engineering/ Material Science
• Good knowledge of concrete
• Have experience in facade inspection and concrete technology

Job Scope

• Work closely with Technical Director, Project Manager in managing the projects in relation to Civil Engineering field in structural investigation.
• Perform inspection and structural investigation work
• Preparation of reports for submission
• Assist in laboratory testing
• Work closely with lab staff, clients and representatives of SAC to ensure proper handling of equipment and procedure in compliance with the requirement of ISO 17025
• Responsible for testing of construction materials at the lab and performing tests and interpretation of results and reports.

https://wa.me/6596420989

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Salary: up to $5000

Duration: 6 months contract

Working Days & Hours: Mon-Fri Office Hours

Location: Gul (company bus from Boon Lay, Jurong east, CCK, Outram, Bedok MRT)

Job Description:

• Work closely with Supply Chain various department on daily operation matters
• Review MRP and material demand to perform material planning to support production schedule
• Monitor inventory, review PO backlog and generate daily receiving lists to the warehouse.
• Plan, control, and trigger material movement via STO with 3PL.
• Ensure timely delivery of material to support the plant's operation and customer's shipment demands.
• Analyze and close monitoring of excess and obsolete inventory
• Manage forecast accuracy, review safety stock requirement Support cost-saving initiatives and process improvement.
• Work closely with sub-con on the delivery arrangements to meet our customer request.
• Ensure planning activities and procedures are in compliance with the company's ISO 14001/9001. Any other ad-hoc responsibilities assigned.

Job Requirements: Min Degree in Supply Chain / Business or similar w min 3-5 yrs of relevant MRP experience

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Job description

• Set up and operate CNC milling machines on workpieces according to job order
• Meet production schedule and target
• Provide suggestions to increase efficienct and productivity
• Daily incoming jobs assigned by supervisor
• Maintain safe operations by adhering to safety procedures and regulations
• Maintain all equipment, machines and area cleaning
• Assist tema leaders by giving constructive ideas and feedback to improve production process

Job specification

• Ability to read technical drawings
• At least 3 years of relevant working exprience handling machines
• Has ability to operate machines and tools independently
• Positive attitude and initiative

Interest parties may email to [email protected] or call 6749 9386 to find out more!

Job Responsibilities:

• Scrutinize projects’ contract documents
• Coordinate with engineers from Design Department on shop drawing production
• Prepare budget for projects
• Prepare monthly progress claims together with Contract Department
• Attend site meetings
• Liaise with client’s representative and engineers to ensure smooth progress of work on site
• Work closely with site supervisors and foremen on the deployment of workers on-site
• Control wastages and productivity on-site
• Prepare monthly Site Activity Reports
• Prepare method statements and attend to site’s technical problems
• Observe and inculcate safety awareness among site personnel and workers
• You will also be trained in Headquarter’s Design Department and/or Technical Supports Department subject to the exigency of duties in the Operations Department
• Ensure compliance with Company’s IMS process and procedures
• Ensure OSH risk assessments and EMS impact & aspect register are conducted and implemented in company operations
• To be assigned to Oversea Projects when opportunities arise
• Any other duties to be assigned to you from time to time

Pre-requisites:

• Excellent oral and written communication skills in English language
• Outgoing personality and service-driven with a positive and “can-do” attitude
• Proactive and self-motivated in problem-solving
• Ability to read and interpret drawings
• Strong time management and project management skills
• Proficient in the use of AUTOCAD software
• Willing to travel or station overseas for projects

• Support the planning, implementation and upgrade of the cybersecurity products and solutions.
• Train external and internal clients on how to use the company products and solutions.

Requirements:

• Diploma in IT/Cyber Security Engineering or equivalent
• At least 2 years of experience in IT, IS or Cybersecurity industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

To be responsible for fulfilling NBAP/P2P service requests from our customers; including working together with the support from internal and external teams to resolve provisioning issues as part of a member of Service Provisioning Department.

Requirements :

• Monitor end-to-end tracking of orders to ensure timely and accurate updates of works
• progress.
• Provide timely, accurate and quality of works progress updates to Requesting Licensees.
• To go on-site if needed to conduct survey or requested by Requesting Licensees to resolve
• site issues.
• Liaise with Requesting Licensees/Contractor/ internal stake holder on NBAP projects or
• work orders.
• Ensuring the submission of WAH documentation from contractor and assess them
• Accordingly.
• Inspecting of sites to ensure contractor follow operational procedures.
• Perform other duties as assigned by supervisors.

Requirements :

• Diploma in Engineering or with at least 2 years of relevant experience
• Possess excellent project management and communications skills.
• A good team player and quick learning, goal oriented individual.

• Lead a Project Team of consultants, contractors, developer in daily-site activities
• To manage M&E construction projects and to monitor the projects are carried out with respect to the target schedule.
• To attend project meeting and to coordinate with clients, consultants, main contractors and sub contractors.
• Preparation of Progress Claim, Materials Submission, Risk Assessment, Progress Report, Shop Drawings & As Built Drawings for projects.
• Assist in settlement of project final account including variation orders.

Requirements

• Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Electrical/Electronic) or equivalent.
• Required skill(s): MS Office, MS Project, AutoCad, Project Management
• At least 6 year(s) of working experience in the related field
• Preferably Managers specializing in Electrical Engineering

Responsible for developing and maintaining strong interpersonal relationships with customer representatives, ensuring Customer Satisfaction, and maintaining all equipment models specific to Molecular Imaging and Radiopharmacy (Cyclotron & Synthesizers).

GE Healthcare is a leading global medical technology and digital solutions innovator. Our mission is to improve lives in the moments that matter. Unlock your ambition, turn ideas into world-changing realities, and join an organization where every voice makes a difference, and every difference builds a healthier world.

Essential Responsibilities:

• Maintain all equipment models specific to Molecular Imaging and Radiopharmacy (Cyclotron & Synthesizers)..
• Perform total system level troubleshooting on complex multi-symptoms problems.
• Maintain daily interface with doctors and technicians on equipment status issues, to ensure satisfaction of primary customers.
• Responsible for Warranty and Preventive Maintenance Service contract cost control.
• Complete all administration tasks on time (e.g., ensure timely completion of Field Modification Instructions and Preventive Maintenance Service inspections documentation for assigned accounts).
• Assist in Account Sales visits, to train Field Engineers where necessary, and identify Sales opportunities and communicate them to account team.
• Assist in the growth and direction of business in geographic area.
• Share best practices during weekly team meetings.
• Maintain effective quality systems and programs compliant with ISO 9001 standard, according to the GE Service Quality Policy Statement.

Quality Specific Goals:

• Aware of and comply with the GEHC Quality Manual, Quality Management System, Quality Management Policy, Quality Goals, and applicable laws and regulations as they apply to this job type/position.
• Complete all planned Quality & Compliance training within the defined deadlines.
• Identify and report any customer quality or compliance concerns immediately to the Quality Organization.
• Identify and report any personal quality or compliance concerns immediately to the Quality Organization.
• Ensure timely dispatch closure.
• Ensure completion of all field modifications instructions (FMI) within prescribed timeframe.
• Participate in continuous improvement activities by identifying and appropriately escalating process and product quality gaps, providing solutions when possible.

Qualifications/Requirements:

• Degree level in Engineering or equivalent.
• Technical and analytical skills, with more than 5 years of Molecular Imaging and Radiopharmaceuticals Services experience in Healthcare Industry is required.
• Comprehensive knowledge of Molecular Imaging and Radiopharmaceuticals is a must
• Ability to work independently with minimum supervision.
• High work standards and quality.
• Shows initiative and motivation.
• Plans and organizes work effectively.
• Sought by others for guidance and advice.
• Strong customer skills and deals tactfully and effectively with differences of opinion (e.g. influences rather than directs).

Inclusion and Diversity

GE HealthCare is an Equal Opportunity Employer where inclusion matters. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

We expect all employees to live and breathe our behaviors: to act with humility and build trust; lead with transparency; deliver with focus, and drive ownership – always with unyielding integrity.

Our total rewards are designed to unlock your ambition by giving you the boost and flexibility you need to turn your ideas into world-changing realities. Our salary and benefits are everything you’d expect from an organization with global strength and scale, and you’ll be surrounded by career opportunities in a culture that fosters care, collaboration and support.

Purpose of the job:

Develop ways to extend the product life cycle and develop growth opportunities and share best practices to drive cost performance and efficiencies

Key accountabilities:

• Support/leads the Projects/Programs Engineering team to ensure that the correct technical governance is being applied (e.g. suitable design and expert input, defining and enforcing architecture/métier standards, methodologies, processes, tools and solution frameworks against which programs and projects can deliver) – focusing inwardly on the internal consistency; and outwardly on its coherence with other solutions/métiers and standards.
• Review the technical input and subject matter expertise of the proposed design, covering areas such as the definition of requirements compliance, functional fit, technological capability, cost, and delivery capability
• Assess the feasibility of the proposed solution (performance, delivery model and organizational fit), and propose mitigation plans
• Engages with projects/programs to ensure technical risks are being identified and managed
• Chair/Support Design Reviews for subject matter in his/her field of critical developments and projects
• Ensure the implementation of generic products and systems by multi-project synergies in order to optimize cost of technical solutions.
• Propose/Support technical innovation and roadmap development as required in answer to the business strategy of his/her field, with a constant preoccupation to make optimization on the company portfolio and internal processes.
• Maintain view of industry and standards, and domain technical watch to guide orientation with market trends.
• Provide pre-tendering support regarding business opportunities where expected solution does not exist in current portfolio.
• To lead/assist tenders to ensure consistency between the tender development needs and the programs development roadmap
• Owns and develops the processes and procedures through which the regional services organizations undertake engineering activities.
• Drives best practice in the regional services organizations, ensuring standard solutions and architectures are developed, which maximize reuse and minimize rework.
• Ensure a harmonized approach to resolving obsolescence and safety issues, ensuring issues are identified on all affected fleets and common resolutions are applied.
• Identify opportunities to maximize the use of best cost engineering resource in delivering both global and regional engineering initiatives.
• Set the competence requirements for global and regional services activities and ensure that competence is assessed.
• Identify opportunities for fleet upgrades, modifications and improvements, defining standard solutions and architectures and then providing the technical governance and leadership to realize these opportunities in the regional services organizations.
• Chair/support user groups and global community calls to identify multi-project synergies, resolve issues and spread best practice
• To provide engineering leadership and governance for services projects, where the necessary competence and experience is not available.

Performance measurements:

OTD, QCD, PMC, Project reliability / availability / cost targets

Educational Requirements:

University degree in Railway Engineering, Electronics, Computer Science, Automation Engineering or Electrical and Mechanical Engineering

Competencies:

Mandatory:

• 1-5 years of experience in Railways system/Application engineering for Engineer
• Knowledge of rolling stock equipment
• Graduated from a STEM university-type course
• Member of an appropriate Engineering Institution

Desirable:

• Knowledge of rolling stock maintenance
• Certification in System Engineering
• Experience
• Working knowledge of safety management systems and safety risk assessment
• Proficient in the use of MS Office, SAP, BI/BO

Competencies & Skills

• Problem solving capacity (technical and costs evaluation of a solution)
• Capacity of managing Technical risks
• Self-motivated
• Attention to detail
• Ability to work independently
• Desire to learn
• Effective, professional interpersonal skills
• Strong team player

• 4+ years of experience in network security engineering.
• Proficiency in Cisco Catalyst Switches (IOS), Cisco Nexus Switches (NXOS), and Alcatel Lucent Switches (AOS).
• Experience in configuring and managing Palo Alto and Fortinet Fortigate Firewalls.
• Hands-on experience with Alcatel Lucent Wireless Controllers.
• Familiarity with SolarWinds NPM / NCM for network monitoring and configuration management.
• Proficient in ClearPass Policy Manager for network access control and policy enforcement.
• Knowledge of network protocols, security architectures, and best practices.
• Design, implementation, and maintenance of network security solutions, ensuring the stability, reliability, and security of the network environment.

Key Responsibilities:

• Configure, and manage Cisco Catalyst Switches (IOS), Cisco Nexus Switches (NXOS), and Alcatel Lucent Switches (AOS) to maintain a secure and efficient network infrastructure.
• Implement and maintain Palo Alto and Fortinet Fortigate Firewalls for network security and access control.
• Administer Alcatel Lucent Wireless Controllers to ensure a secure and robust wireless network environment.
• Utilize SolarWinds NPM (Network Performance Monitor) and NCM (Network Configuration Manager) for network monitoring and configuration management.
• Manage and maintain ClearPass Policy Manager for network access control and policy enforcement.

Thanks, and Best Regards

Karanam Vijaya Kiran

(EA Registration no: R1443178)

Recruitment Manager

Hand Phone: +65 92333815

Helius Technologies Pte Ltd (EA Licence No: 11C3373)

Job Responsibilities:

• Support the Workshop Manager in managing the Taxi Maintenance operations and ensure all KPIs are met.
• Ensure operation costs including but not limited to material, manpower and operating are kept within the operation budget.
• Review and enhance the existing systems without compromising quality or service while optimizing cost.
• Manage and ensure smooth day-to-day operations.
• Produce statistics and reports, to review performance and recommend procedural enhancement for discussion
• Establish, implement and monitor safe working practices and procedures.
• Perform routine safety inspections on equipment and sites to ensure workshop conforms to all health & safety regulations.

Job Requirements:

• Degree holder in Mechanical / Electrical / Electronic Engineering discipline or equivalent qualification
• Minimum two years experience in operations environment in Automotive Industry
• Able to build effective relationship with cross-divisional teams
• Proven tactfulness in communicating with others and constructively resolve challenges
• Excellent interpersonal and communications skills

Job Responsibilities:

• Design and develop PC based Automated Systems for manufacturing, electronics and semiconductor equipment
• Evaluating and establishing requirements and specifications of automated systems
• Provide technical support (on-site as when required)

Job Requirements:

• Diploma or Degree in Electrical / Electronic / Computer Eng / Computer Science.
• Entry Level candidates are welcome to apply. However, experienced candidates in software development in the field of vision and automation will be an added advantage.
• Strong programming in C/C++, Visual C Net, and other related programming languages.
• Experiences in HMI/MMI programming.
• Good knowledge development and application of Motion Control.
• Knowledge in Computer Vision, Image Processing and, Optics and Lighting would be a distinct advantage
• Possess good knowledge of software quality and testing methodologies
• A strong team player with a good attitude and interpersonal skill
• Willing to travel (travelling is required)
• 2 positions available.

• Guide and assist in planning and management of all renovation projects.
• Liaise with other departments and clients.
• Provide customers with technical support and solutions as well as providing feedback to management and customers on progress of work.
• Identify and evaluate projects and maintenance regimes.
• Monitor and update list of legal requirements.

Requirements:

• Degree in Mechanical/ Electrical / Civil Engineering or related field.
• Min. 6-7 years of relevant working experience.
• Familiar with Architectural / Mechanical & Electrical drawings.

** We regret to inform only shortlisted candidates will be notified. Applicants who do not possess necessary experience or qualification will still be considered on individual merits and may be contacted for other opportunities.**

JOBSTUDIO PTE LTD

EA License No: 10C4754

EA Personnel: Stephanie Toh

EA Personnel Reg No: R1217674

More Information:

• Mode of Employment: Permanent Employment [Direct headcount]
• Company: Reputable International Engineering (Facilities Management) Service Provider Organization
• Working Location: CBD Area
• Working Hours: 5.5 Working Days per week (8.30 AM – 5.30 PM on full day & 8.30 am – 12.30 PM on half day)
• Benefits (on top of basic): OT allowance & Annual Bonuses (AWS & Performance)

Responsibilities:

• Perform daily operational activities such as:
• Preventive and Breakdown maintenance activities (of all ACMV related equipment) in accordance with safety guidelines
• Safe keeping of Hand-tools & practicing good housekeeping habits
• Providing technical advices & assistances for all maintenance functions
• Preparing routine & post-job service reports
• Attending to customers' enquiries/ requests.
• Other related/ ad-hoc tasks as assigned

Requirements:

• Possess NITEC in Mechanical, Electrical, Electronic or related
• Comfortable to work 5.5 working days/week (with rotating shift arrangement)
• Advantageous to have, but not a must have: 2 Years (or more) in ACMV Management (ACMV Equipment, Chillers, Switchboard & Generators)

[Those without prior working experience are welcome to apply too (On-The-Job Training will be provided)]

To Apply, please kindly email your updated resume to [email protected].

We regret that only shortlisted candidates will be notified.

However, rest assured that all applications will be updated to our internal resume database for future opportunities.

APBA TG Human Resource Pte Ltd (14C7275) || Yadanar Su Mon (R1549384)

Responsibilities:

• Your leadership and operations management skills will be highly improved.
• Leading a team of operators, technicians to achieve production goals.
• Provide support to clients' engineers on process development.
• Develop new and modified process formulations, handling equipment and reviews processing techniques and method.
• Manage equipment and setup process.
• Characterise process and equipment system to maintain and control process parameters.
• Troubleshoot process deviation and equipment malfunctions.
• Improve manufacturing yield and quality.

Requirements:

• Min Degree Material Science / Chemical / Electrical/Mechanical Engineering Or it's equivalent.
• Relevant working experiences in wafer fab / semiconductor industry
• Good technical skills including problem-solving, statistical data analysis and DOE.
• Able to handle a team of a team of operators, technicians

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

- Setup, operate and maintain all measuring equipment, gauges, and fixtures.

- Proficiency in understanding technical Drawing.

- Perform troubleshooting and repair of equipment.

- Measuring and verified the products to meet customer specification.

- Programming of CNC lathe machine.

- Operate turn mill machines with automatic bar feeder for production.

- Monitor production progress and fine tuning the machine to optimize production of components

- Reduce scrap and meet productivity targets.

- Perform environment clean practices.

- Perform workplace safety and health (WSH) policy.

职位描述：

-设置、操作和维护所有测量设备、仪表和夹具。

-熟练理解技术图纸。

-执行设备的故障排除和维修。

-测量和验证产品以满足客户规格。

-数控车床编程。

-使用自动棒料送料机操作车铣床进行生产。

-监控生产进度并微调机器以优化组件的生产

-减少废品并实现生产率目标。

-执行环境清理实践。

-执行工作场所安全与健康 （WSH） 政策

• Your primary responsibility is to provide technical assistance and support to end-users within the organization.
• Your role involves resolving hardware and software issues related to desktops, laptops, and other IT peripherals.
• You will be tasked with installing, configuring, and maintaining computer systems and ensuring they operate efficiently.
• Additionally, you'll assist users with technical inquiries, troubleshoot problems, and escalate issues when necessary.
• Provide remote assistance for off-site users using remote desktop tools.
• Assist users with login issues, password resets, and access-related queries
• Your goal is to ensure a smooth and productive computing environment for all employees, contributing to the overall efficiency of the organization.

• Strong understanding of desktop operating systems (Windows, macOS).
• Knowledge of desktop hardware components and peripherals
• Install and configure desktop operating systems, applications, and software updates.
• Set up and troubleshoot hardware components.
• Excellent troubleshooting skills to diagnose and resolve technical issues.
• Ability to analyze and solve hardware and software problems efficiently.
• Ability to collaborate with other IT professionals and support teams.
• Share knowledge and contribute to the overall IT support function.
• Familiarity with remote desktop tools for providing off-site support

#techsupport #desktopsupport #itsupport #ittechnician #l1support #l1desktopsupport #technology #tech

• Responsible in design and development of optics and illumination system

Requirements:

• Degree and above
• At least 2 years of experience in optics design/optical systems

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

As a Mechanical Engineer / Senior Mechanical Engineer, you will be part of a team that is responsible for designing, fabricating, integrating, and testing of mechanical related components for a modular kit intended to convert manned vessels into unmanned vessels.

You will work closely with multiple teams and vendors to ensure seamless integration of multiple subsystems.

Job Responsibilities:

• Conduct thorough analysis of system requirements and specifications to identify mechanical engineering needs and constraints, and translate high-level system requirements into mechanical design requirements.
• Conceptualize and design mechanical subsystems and components that meet the system requirements. Utilize CAD software and other tools to create detailed designs, conduct relevant simulations, and analyse performance. Ensure adherence to industry standards, regulations, and best practices throughout the development process.
• Collaborate closely with cross-functional teams, including electrical engineers, software engineers, and systems engineers, to integrate mechanical systems effectively within the overall system, considering factors such as compatibility, functionality, maintainability, and performance.
• Adopt a product-centric approach to design and engineering.
• Communicate and coordinate with stakeholders to ensure alignment on design objectives, project timelines, and system performance requirements.
• Develop test plans and procedures, and perform comprehensive testing of mechanical subsystems and their integration within the larger system. Analyse test results, identify potential issues or areas for improvement, and implement corrective measures. Collaborate with testing teams to ensure compliance with quality standards and safety regulations.
• Maintain accurate and comprehensive documentation throughout the design, development, and integration process. Prepare technical reports, specifications, and drawings to effectively communicate design details and recommendations to stakeholders.
• Perform mechanical hands-on fitting, assembly and installation of mechanical components on site., including repair and maintenance.

Requirements

• Bachelor's degree in Mechanical Engineering or a related field.
• Strong understanding of mechanical engineering principles.
• Good technical, creativity in problem-solving skills and strong reasoning ability.
• Excellent communication skills, both verbal and written, with the ability to convey technical information to diverse audiences.
• Proficient in 3D engineering design and simulation software such as SolidWorks, SolidEdge, ProE, and Catia.
• Familiarity with industry standards, regulations, and best practices related to mechanical engineering.
• Prior design experience related to unmanned systems will be a plus.
• Ability to work effectively in a team environment.
• Willingness to travel as needed.

1. INTERFACE MANAGER

Job Description:

• Responsible for design, implementation, testing and commissioning of Large-Scale, Rail Transportation projects for Supervisory Control & Data Acquisition (SCADA) System
• Manage a team of interface engineers and coordinate with interfacing contractors and stakeholders to firm up the interface design including getting the interface design and interface documents accepted by the client.
• Participate in interface meetings and interface testing on site with the interfacing parties.

Job Requirement:

• Diploma/Degree in Electrical, Electronics or Computer Engineering
• Excellent working knowledge of SCADA software package on UNIX and Windows platforms
• 3 – 5 years’ working experience in the design and implementation of Real Time Control System in a project environment
• Experience with various types of interfaces and protocol
• Ability to participate in multiple projects and work under pressure
• Pro-active, resourceful and able to work with various stakeholders
• Team player and independent

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for
- Current remuneration
- Expected remuneration
- Notice period

John Goh Meng Chye

EA License No : 06C4642
EA Reg No : R1102621

You are our product validator. You will work closely with our product design team to ensure that our software and/or hardware products meet their specifications in terms of functionality, performance and quality.

If the product behaves unexpectedly, you will analyse and troubleshoot the failures. As our products are deeply embedded, you may find yourself challenged to work in situations with minimal observability and control.

Responsibilities

· Work with the product design team to determine product test parameters

· Come up with test plans and create test cases for product(s), including performance tests

· Carry out system level tests on product(s)

· Define system requirements for in-house test jigs, where applicable

· Troubleshoot and analyse product failures, and streamline testing procedures

· Conduct quality assurance testing

· Build and run automated tests using automated test tools

· Prepare test procedures for technicians to follow

· Train technicians to follow test procedures and provide technical support when needed

· Ensure all tests and procedures meet company and industry standards

· Write test reports for submission to management / and or customer

· Liaise with external vendors for externally conducted tests such as EMI / EMC, environmental tests

Requirements

· Bachelor’s degree in electrical engineering, software engineering, computer science, or computer engineering

· At least 1 year work experience as a test engineer, testing hardware and/or software

· Familiarity with hardware/and or software testing tools

· Skilled in at least 1 scripting language, e.g. Python

· Extensive knowledge of engineering and testing procedures

· Good problem-solving skills, with attention to detail

· Keen to find bugs

· Willingness to perform repeated tests when necessary

· Ability to troubleshoot and think out of the box

· Ability to work independently and with a team

· High-level technical writing skills

· Good communication skills

Advantageous to have

· Knowledge and experience in product development and/or software development life cycles

· Familiarity using Linux for software development

· Experience in writing C programs

· Experience in test automation tools

Location: 39 Changi North Crescent Singapore 499642

Entity: Goodrich Aerospace Pte Ltd (MRO Site)

Specific Role Responsibilities:

Support GSE engineering activities in IATA III

· Perform tooling and test equipment validation for GSE in Japan, South Korea, Malaysia and Singapore

· Perform facility assessment for GSE engineering during the proposal and during capability activation in the region

· Write SOW for test equipment needs for all Collins MROs in the region

· To provide requirements interpretation in CMM/CMP

· To assist AOG event and help to expedite resolving AOG related issue

· Provide new LRU CMM training to Collins repair station

· Initiate more repair capability into the region such as NEO ATS (Malay), new GTFA LRU (SNG), KF-21 ACM (S Korea)

· Provide correlation training for MRO engineering, self-issue certification

· To help the MROs documenting best practice

· To drive improvement in calibration activity that meet or exceed FAA/EASA requirements

· Be able to travel to assist both internal and external customer in less than 24 hour and able to assess the situation more effectively.

· Provide better Action Item with improve commit date to the customer.

Support GSE related projects

· Customer response center case closure

· Special project in support of field service-related issues

· Entry into service

· Document control in terms of maintaining ISO certification

Requirements

· Degree in Electrical Engineering.

· Possess test engineering skills.

· 10 years’ relevant engineering experience in the Aviation industry would be preferred

· Flexible and ability to adapt to multi-cultural and quick changing environment.

· Ability to work independently and across multiple time zones.

· Strong interpersonal skill.

· Able to multi-task with a “can-do” attitude.

· Good oral and written communication skills.

· Good proficiency with Microsoft Office applications.

Responsibilities:

· Develop green marine solutions that reduces marine carbon footprint, in line with company business objectives.

· Hands on in setting up of test lab to enable development and testing.

· Perform PLC software and algorithm development for electrical propulsion solutions.

· Generate documentation of software architecture and logic flow, test procedures, quality control and any other necessary supporting documents.

· Participate and support commissioning of vessels with similar configurations.

· Troubleshoot and resolve any issues related to our delivered solutions that may arise during the vessel commissioning.

· Any other tasks as may be required by supervisor.

Requirements:

· Min engineering degree in relevant discipline

· Strong software development skills particularly in equipment controls

· Strong analytical and troubleshooting skills

· Hands on person

· Team player

· Good communicator and has no problem engaging with external parties

· Knowledge in power electronics, motor drives, marine propulsion systems is a plus

· Fresh graduates are welcomed

Working place : Penjuru lane

Working hour : MON - FRI 8.30AM-6PM