Responsibilities:

· To understand the contract of the project.

· To study and work out the method statements.

· To coordinate with the Professional Engineer (PE) regarding temporary supports requirement for the project.

· To plan the manpower requirement for the project (organization chart).

· To plan the resources and equipment requirement.

· To work out the budget required for the project after the method statement has been established.

· To source the right sub contractor for the project. Obtain quotations from sub contractors or suppliers.

· To review the sub contractors’ and suppliers’ quotations with immediate superior.

· To coordinate with engineering, production and purchasing department regarding the procurement of the material required for the project.

· To attend meetings with main contractor regarding planning, method of statement, production and the execution of the erection works on site.

· To disseminate the information obtained during meetings with our main office and main contractor, to the subordinates.

· To supervise a team of site/construction managers, project engineers, site engineers, safety supervisors, surveyors, QC inspectors and subcontractors for the successful completion of the projects.

· To ensure that the following documents and reports are maintained, recorded and reported at all time and on time.

· ECR, ECN, RKL, SI and SD to sub contractor, NCR, GDN, DO, confirmation of VI, VO record, equipment usage record, KPL daily erection record, daily material received record, daily manpower record, diesel usage record, PR, PO, daily site erection report alignment and level report, QC related reported, weekly progress report, monthly progress report, monthly budget and expenditure report.

· Coordinate with senior QS regarding monthly progressive claims to the client.

· Assisting Commercial Manager to chase after the payment from client.

· To coordinate with our QS and client’s QS regarding the settlement of the VO (star rate) with the client.

· To coordinate with our safety department regarding insurance issues.

· To coordinate with our safety and client’ safety supervisor regarding safety issues at site.

· To review and certify the sub contractor progress payment claim.

· To certify supplier invoices.

· Preparation of weekly, 3 weekly and full schedules for the project.

· Monitoring and maintain daily, weekly and full schedule for the project.

· Verification of the time card for staff.

· Project correspondence.

· To coordinate with the cost accountant regarding the cost control structure.

· To coordinate with HR department regarding personnel related issues.

· To coordinate with accounts department regarding payment issues to suppliers and sub contractors.

Requirements:

· Minimum of diploma / degree holder in Engineering / Civil Engineering

· Minimum of 5 years’ relevant experience

· Strong analytical and problem solving skills.

Additional Information:

· Based at site

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our products are built to help imaginations thrive. This is doubly true of the teams that make our innovations possible. Together, we inspire creativity and enrich life - a mission we aim towards achieving every day. To us, every challenge, no matter how ambiguous, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always. At TikTok, we create together and grow together. That's how we drive impact-for ourselves, our company, and the users we serve. Join us.

About the Team

The Business Risk Integrated Control (BRIC) team is missioned to:

- Protect TikTok users from abusive behaviors and activities, including fake accounts, social spam, growth fraud, etc.;

- Secure platform health and community experience authenticity, for content consumers, creators, advertisers and beyond;

- Build infrastructures, platforms, and technologies, and collaborate with many cross-functional teams and stakeholders to improve the healthiness and transparency of the TikTok platform.

The BRIC team works to minimize the damage of inauthentic behaviors on TikTok platforms (e.g. TikTok, CapCut, Lark), covering multiple classical and novel community and business risk areas such as account integrity, engagement authenticity, anti spam, API abuse, growth fraud, live streaming security and financial safety (ads or e-commerce), etc. In this team you'll have a unique opportunity to have first-hand exposure to the strategy of the company in key security initiatives, especially in building scalable and robust, intelligent and privacy-safe, secure and product-friendly systems and solutions. Our challenges are not some regular day-to-day technical puzzles -- You'll be part of a team that's developing novel solutions to first-seen challenges of a non-stop evolvement of a phenomenal product eco-system. The work needs to be fast, transferrable, while still down to the ground to make quick and solid differences.

Responsibilities:

- Establish and enhance risk defense strategy, operational excellence, plus technical roadmap of a risk domain of TikTok products/platforms (e.g., fake accounts detection, social spam, financial fraud, etc.).

- Own end-to-end risk defense business results of the given risk area, drive planning and execution, win trust from internal stakeholders and external users.

- Within the given managerial scope, uplevel engineering excellence and culture, support career growth of engineers and data scientists, deepen XFN collaboration, empower the team for long term success.

Qualifications:

Minimum Qualifications

- Master or above degree in computer science, statistics, or other relevant, machine-learning-heavy majors.

- Solid engineering skills. Proficiency in at least two of: Linux, Hadoop, Hive, Spark, Storm.

- Familiarity with data mining, data science, machine learning or finance/social platform risk defense. Bonus given if possessing at least one advantage among risk control, data science, machine learning, risk engine, realtime computing.

- Strong ownership; proactive, skillful, candid and clear communication; ability to handle high complexity, urgency, cross-functional alignment; stay empathetic and calm;

Preferred Qualifications

- 4 years of technical leadership experience in relevant industry jobs.

- 2 years of software engineering or data science managerial experience in relevant industry jobs.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Job Description

• Provide network solutioning for brands mainly like cisco, palo alto, fortigate, huawei, F5 load balancers.
• Skill for routing, switching and wireless, troubleshooting.
• Providing support for network night migrations.
• Network design and maintaining network diagrams, low level and high level design documents.
• Project management and technical support for solarwinds network monitoring system.
• Troubleshooting of network related issues for network in project phase.

EA Number: 11C4879

Company Overview:

Global Tax Free Singapore is authorised by Inland Revenue Authority of Singapore (IRAS) as a Central Refund Agent (CRA) as well as s sole Central Refund Counter (CRC) operator in Singapore, thereby licensed to provide tax refund services to tourists.

Specialists in tax refund services, Global Tax Free offers:

· Tax(GST) Refund Services for tourists and merchants

· Central Refund Counter

· Marketing Services

· Market Intelligence

Join our pioneering team at the forefront of technology. We are committed to innovation, creativity, and excellence in the tech industry. Our culture fosters growth and collaboration, empowering every team member to contribute to our success.

Role Overview:

We are seeking an IT Support Engineer who is adept at managing and maintaining our technical infrastructure and also possesses a keen sense of adventure and flexibility. Your role will extend beyond the confines of our office, taking you to data centers, airport airside operations, and retail locations. You will ensure the seamless operation of our IT assets, troubleshoot complex issues, and implement robust security measures. You will also oversee network security measures, including penetration testing and network vulnerability scanning, to make sure our technical infrastructure supports all locations with appropriate compliance.

Key Responsibilities:

· Maintains, configures, and ensures the reliable operation of computer systems, peripherals, POS devices, and network servers.

· Handles the installation and upgrade of computer components, POS devices, and software.

· Addresses hardware and software errors, prioritize problems, and mitigate the impact of IT issues.

· Drafts technical specifications for planning and executing regular IT infrastructure upgrades and update patches.

· Leads efforts in desktop and helpdesk support to minimize disruptions.

· Coordinates IT audits ensuring compliance with relevant regulations and standards, and addressing any audit findings promptly.

· Visits data center, retail outlets, and the airport and provide on-site technical support, ensuring the stability and security of IT operations across all locations.

Minimum Qualifications:

· Diploma or ITE in Information Technology, Computer Science, or related fields.

· At least 2 years of hands-on experience in IT infrastructure support.

· Certifications in relevant tech areas (e.g., Cisco CCNA) will be desirable.

· Proficient in hardware, software, and networking systems.

· Exceptional troubleshooting and problem-solving skills.

· An adventurous spirit ready for the demands of fieldwork across diverse locations.

· Good to have hands-on/technical knowledge of:

Network technologies, like Fortinet, Cisco switches, routers. LAN/WAN, subnets, firewalls, VLAN's, and VPN.

· Proficiency in Korean is a plus

Why Join Us?

· Dynamic and innovative workplace culture.

· Opportunities for growth and learning.

· Corporate direction with continuous growth and vision.

We are on the lookout for dynamic individuals passionate about technology and ready to go the extra mile. If you thrive in a fast-paced environment and are eager to make a significant impact, we would love to hear from you.

We are looking for a skilled Welder to cut and join metals and other materials at our facilities or construction sites. You will operate appropriate equipment to put together mechanical structures or parts with a great deal of precision. Your job is important as it provides the foundation for strong infrastructure.

A welder must be competent in using potentially dangerous equipment following all safety precautions. The ideal candidate will also have a steady hand and great attention to detail. Knowledge of different kinds of metal and their properties is essential.

Responsibilities

• Read blueprints and drawings and take or read measurements to plan layout and procedures
• Determine the appropriate welding equipment or method based on requirements·
• Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements)
• Operate angle grinders to prepare the parts that must be welded
• Align components using calipers, rulers etc. and clamp pieces
• Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead)
• Repair machinery and other components by welding pieces and filling gaps
• Maintain equipment in a condition that does not compromise safety
• Co-ordinate with fitter and supervisor for job instruction.

Requirements

• Proven experience as welder
• Experience using a variety of welding equipment and procedures (TIG, ARC, MIG, etc.)
• Experience in using electrical or manual tools (saws, squares, calipers etc.)
• Ability to read and interpret technical documents and drawings
• Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.)
• Proficient in English
• Professional Certification (e.g. an AWS welding certificate) will be an added advantage

• Ensure the BWTS & SCRUBBER systems achieve the required technical standards

and performance.

• Ensure the BWTS & SCRUBBER systems’ certificates and documents are

systematically updated and stored.

• Ability to supervise the installation of ballast water treatment system & Scrubber system.

• Effective implementation of the Company’s planned maintenance system.

• Prepare, arrange, and manage class, statutory, and other vessel surveys.

• Prepare, manage, and monitor dry-dockings and other required repairs and maintenance

jobs.

• Review and train vessels’ crew performance.

• Any other tasks as assigned by the company.

Job Duties

• Understand the drawings and job specifications for utilities and sewer diversion works; Draft method statements on the assigned tasks and seek approval from supervisor
• Plan and order for equipment and material required on the tasks; Seek approvals from the respective government agencies (as and when required) on time to minimise delays
• Prepare the ITP (inspection and test plan) documents, job hazard analysis (JHA) and risk assessment report for the assigned tasks in consultation with supervisor
• Monitor progress against the program milestones for on-time completion; Monitor production rate and provide feedback to supervisor on resource allocation
• Check workmanship and quality against specifications in drawings and ITP requirements; Perform other quality tests as required
• Provide inputs to supervisor to minimize wastage and optimize material/labour costs; Allocate costs under the correct code

Job Requirements

• Bachelor’s degree in Civil Engineering
• Has at least 5 years of working experience with infrastructure projects
• Has previously worked on utilities and sewer diversion works
• Possess good communication skills and able to work with minimum supervision

• To involve in the planning and execution of mechanical engineering and construction works for building services.
• To assist in prepare tender documents, design and technical specifications for tenders, as well as supervise the installation and commissioning of mechanical works.
• Able to liaise both end user customers and vendor and supplier for project coordination.
• Onsite support upon customer request if necessary to have first-hand look for project requirement.
• Determines project schedule by monitoring project progress, coordinating activities, resolving site problems
• To read and draw technical drawing
• petty cash handling
• Deploy manpower to the site and record their timings
• Support safety team and management team
• Emergency response regardless of time
• Material Procurement
• Assist Manager in Project Integration
• Strong analytical, Problem solving & Decision Making Skill

• To involve in the planning and design of mechanical engineering works for building services.
• To prepare tender documents, design and technical specifications for tenders, as well as supervise the installation and commissioning of mechanical works.
• Able to liaise both end user customers and vendor and supplier for project coordination.
• Onsite support upon customer request if necessary to have first-hand look for project requirement.
• Responsible for all on-site technical and engineering matters
• Determines project schedule by monitoring project progress, coordinating activities, resolving site problems
• To read and draw technical drawing
• Well versed in Autocad
• Material Procurement
• Assist Manager in Project Integration

Strong analytical, Problem solving & Decision Making Skill

Job Description

• Industry/ Organization Type: Audio Visual (AV) Solutions Provider
• Position Title: AV Engineer
• Working Location: Kallang (near MRT)
• Working Hours: 5 Days (Mon – Fri, 9 am – 6 pm)
• Salary Package: Basic Salary + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Collaborate with different parties to deliver high-quality audio-visual and video conferencing solutions, ensuring they adhere to company standards and best practices and fulfill customer requirements.
• Configure, test, and commission professional audio solutions for different venues and corporate meeting rooms, integrating them with other audio-visual and video conferencing systems.
• Provide end-user training, guiding users on how to effectively operate and utilize the implemented solutions.
• Work closely with in-house AV Designers and Engineers, as well as manufacturers such as EV, BOSE, Martin Audio, Samsung, Logitech, etc. to implement fully integrated AV solutions for spaces such as lecture halls, meeting rooms, command centres, auditoriums, and ballrooms.
• Other necessary tasks as assigned.

APPLY NOW!!!

• Minimum Diploma in IT/ Engineering/ Audio Visual.
• At least 2 years of experience in System configuration, Testing & Commissioning for Pro-Audio solutions.
• Good skills and knowledge of DSP programming.
• Experience in some of the products like Videowall, LED & LCD Display, videoconferencing, Audio Visual Switches is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70101 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]

Summary:

• The Mechanical QP will be responsible for ensuring that all mechanical engineering designs and installations comply with regulatory standards and project specifications. This role requires a minimum of 10 years of experience in mechanical engineering and a proven track record of working on large-scale developments.

Responsibilities:

• Review, approve, and endorse mechanical designs to ensure compliance with local building codes and regulations.
• Oversee and certify mechanical installations and construction works.
• Provide technical guidance and mentorship to the engineering team.
• Liaise with clients, regulatory authorities, and project stakeholders to address compliance and safety matters.
• Conduct site inspections and audits to ensure adherence to approved designs and safety standards.
• Stay updated on regulatory changes and ensure that all project activities align with current standards.

Requirement:

• Bachelor’s Degree in Mechanical Engineering or a related field.
• Certified as a Qualified Person (QP) with a minimum of 10 years of relevant experience.
• Strong knowledge of local building codes, regulations, and industry standards.
• Excellent problem-solving, communication, and project management skills.
• Experience working on large-scale residential and commercial projects.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy

Job Responsibilities:

• Provide technical expertise support to customers and internal team members
• Responsible on in-house application, customer application and development support
• Involves providing direct technical support to customers at their location.
• Conduct training sessions for customers / internal employees on how to use and maintain the products or services the company provides.
• Provide support to the engineering and quality assurance teams within the organization

Job Requirement:

• Bachelor’s Degree in Material/Mechanical Engineering or equivalent practical experience, Master’s degree will have an advantage
• At least 5 years of experiences in Semiconductor
• Good knowledge of wire bonding operations and concept
• Wire bonding hands-on experience is needed
• Possesses with good presentation skill, DOE skills are essential
• Minimum supervision and should have good communication skill with customers
• Willing to travel to oversea for customer on-site support

Responsibilities

• Perform and oversee monthly payroll processing inclusive of bank creation and payslip generation
• Handle full recruitment cycle from advertising, shortlisting potential candidates and assisting in arranging interviews and preparing relevant documentations for selected candidates
• Responsible for all Work Pass transaction such as application, renewals and cancellation
• In-charge of on-boarding and off-boarding processes
• Responsible for dormitory check in/out, room arrangement, liaising with dorm operator
• Submission of monthly CPF contributions, IR21 (if any)
• Preparation and submission of statutory, WICA and other relevant HR reports
• Create and upkeep employees’ P-files
• Maintain accurate HR records and assist in preparing reports as required.
• Submission of MOM quarterly surveys
• Submission of MOM monthly salary declarations
• Submission of MOM monthly OED
• Employee training registration and renewal (Coretrade Application/Renewal, WSH Application/Renewal, SP Contractor Portal Application/Renewal, etcs)
• Manage daily HR operations, such as record maintenance and filing.
• Ensure timely renewal of company vehicle insurance and road tax
• Support in general office administration to ensure smooth daily operations.

Preferences:

• Strong organizational skills and attention to detail.
• Excellent communication skills with the ability to interact with employees at all levels.
• Ability to handle multiple tasks and priorities efficiently.
• Proficiency in Microsoft Office Suite and ERP system.

Qualifications & Technical Requirements:

• Preferably 2-3 years of relevant HR experience
• Diploma or Degree in Human Resource Management or Business Administration or equivalent
• Preferably 2-3 years of relevant HR experience
• Good understanding of HR processes and administrative duties.
• Experience in Construction will be an added advantage

Others:

• 5 days’ work
• 9am – 5pm
• 6-month contract role starting from Feb 2025.

What sets our client apart?

Our client is a global leader in advanced technologies, specializing in aerospace, defense, security, and digital identity solutions. With a strong commitment to innovation, they serve a wide range of industries, providing cutting-edge solutions to address complex challenges. The organization focuses on safeguarding people, information, and assets, leveraging expertise in AI, cybersecurity, big data, and connectivity to deliver exceptional value. Trusted worldwide, they empower customers to build a safer, more sustainable future.

Software Engineer (Digital Banking & Payment Platform)

Our client’s Engineering Competence Centre (ECC) in Singapore is an established R&D and engineering hub, delivering innovative solutions across the globe in Digital Identity and Security domains. This includes mobile connectivity, IoT, banking and payment systems, and government applications.

As part of the Digital First project team, you will contribute to the vision of "Banking as a Service," developing platforms that combine card digitization, customer onboarding, and risk evaluation into a seamless, mobile-first experience for financial institutions.

This role is central to driving a DevSecOps transformation where teams collaborate on a unified code base, fostering autonomy and agility to address customer challenges effectively. If you are passionate about innovation and working in a dynamic environment, we would love to hear from you!

Key Responsibilities:

• Develop solutions leveraging GitLab for source code management, continuous integration, and deployment.
• Create frontend components for secure, cloud-based services.
• Oversee end-to-end development, testing, and deployment of solutions.
• Contribute to design, implementation, validation, and documentation within an agile Scrum team.
• Ensure solutions meet quality benchmarks for performance, scalability, maintainability, and reliability.

Required Knowledge, Skills, and Experience:

• At least 5 years of relevant experience with Node.JS.
• Proficiency in version control systems (e.g., Mercurial, Git).
• Familiarity with build systems (e.g., Jenkins, GitLab).
• Experience working in an agile environment (Scrum).
• Understanding of DevSecOps principles.

Preferred Skills:

• Knowledge of Kubernetes, Splunk, and DataDog.
• Experience with Docker, NoSQL databases (e.g., DynamoDB, MongoDB), and MySQL.

Don't miss out on this chance to be a part of a dynamic and growing team. Take the Next Step in your career journey with us!

• To apply, please submit your updated resume along with your notice period, current salary package details, including base salary, incentives, annual wage supplement, and expected salary.
• Click on the 'Apply here' button to drop your resume directly or email it to [email protected].
• Our team will review all applications and contact shortlisted candidates for further steps in the selection process.

Susmita Sahu

EA License No: 91C2918

Personnel Registration Number: R23114076

Responsibilities

-Good team player and work closely with other domain specialist to design

complex solutions

-Analyze business requirements to develop technical solutions and system design

-Generate solution design, project document and Bill of Material for customer

requirement

-Conduct in-house evaluation and Proof of Concept trial with stakeholders

-Liaison with principal vendors to understand their products, solution and pricing

-Assist the project engineers during Technical Project implementation and conduct

of training

-Handle system administration, network support, implementation, troubleshooting

in Windows / Linux

-Perform network troubleshooting to isolate and diagnose network problems

-Upgrade network hardware and software components as required, while ensuring

adherence to Cybersecurity Act, Cybersecurity Code of Practice(CCOP)

-Expected to address any ad hoc activities when needed by the technical team

-Document functional requirements/specifications documents for all the necessary

-systems pertaining the network designed or implemented and the necessary

routing

-Be familiar with latest Networking trends and solutions available in the market

-Undertaking Vendor Certifications as required by company to maintain partnership status

Requirements

-Bachelor Degree or Diploma in computer science or related technical discipline

-At least 3-5 years’ experience in network design and planning

-Very comfortable Familiar with Microsoft Windows and in LINUX operating

environment (Ubuntu, Red Hat, etc)

-Min. 3 years experience in complex project implementations;

-Strong understanding of cyber security, cryptography, security protocol, network

security, TCP/IP networking.

-Strong understanding of Risk Management, Disaster Recovery, Business

Continuity and IT Regulatory Compliance

-Experience in architecting or deploying Virtualization solutions for enterprises

would be advantageous

-Understanding the on-premise/hybrid and cloud networking model

-Ability to work independently with minimal supervision.

-Hands on experience in installing hardware such as servers, network switch,

cables, hubs, routers, and setting up required software environment/applications

-Solid CCTV and Audio/Video knowledge and experience

-Experience with IP communication technology such as IP PBX, video conference

and network management system

-Possess certifications like CCNP Routing & Switching, CCNP Wireless, CISSP or

-equivalent on Networking and Security technologies would be an added advantage.

Role:

• Diagnose and troubleshoot problems with Marine Boilers.
• Carry out repairs on inboard and outboard marine boilers.
• Perform routine maintenance to ensure all shipboard systems are functioning properly.
• Travel domestically and internationally to service jobs on board vessels.
• Maintain cleanliness of the ship and engine room while onboard.
• Provide detailed reports on work performed and communicate the nature of repairs and services to customers.

Safety and Compliance:

• Follow all safety protocols and regulations to maintain a safe working environment.
• Ensure compliance with environmental regulations related to marine services and repairs.

Documentation and Reporting:

• Keep accurate records of all services performed, including time spent, parts used, and labor involved.
• Use service management software to log and track repairs and maintenance tasks.

Team Collaboration:

• Collaborate with other technicians and service team members to ensure efficient workflow and high levels of customer satisfaction.
• Assist in training and mentoring junior technicians as required.
• Perform any other duties as assigned.

Requirements:

• Diploma or equivalent; technical certification or associate degree in marine mechanics or a related field is preferred.
• Minimum of 2 years’ experience in marine service and repair for boilers.
• Strong mechanical skills and ability to solve problems.
• Proficient in using diagnostic tools and marine service equipment.
• Knowledge of marine engines, auxiliary engines, and cargo pumps.
• Ability to read and understand technical manuals and schematics.
• Capable of lifting heavy objects, working in various weather conditions, and performing physically demanding tasks.

Benefits:

• Working Hours: 8 am-6 pm (6 days)
• 14 days Annual Leave after confirmation
• 14 days Medical Leave (completion of 3 months service)
• $200 medical claim per year
• Performance Bonus (Discretionary)

Job Description:

• Site project management
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operation, site coordination, monitoring and reporting work progress
• Other ad-hoc duties as assigned

Requirements:

• Bachelor’s Degree in Civil Engineering / Geology or relevant vocational certificate
• Able to speak and write in English and Chinese in order to communicate effectively with Chinese-speaking clients and associates.
• Knowledge of geotechnical engineering or soil data interpretation or Singapore Geology
• A good team player, self-driven and willing to take responsibility for assigned tasks as project engineer/manager
• Preferably Engineer specialized in Engineering / Civil / Construction / Structural or equivalent
• Only Singaporeans

You may send your resume / CV to email address directly:

[email protected]

As a Service Engineer, you have to attend to equipment fault at customers’ premises. Liaise with the customer and sub-contractors regarding all aspect on the add-on project activities. Monitor the progress of the work done closely in order to ensure that the schedule and quality of work are met. Also to ensure that all materials and equipment are delivered on time as per schedule for site installation or rectification of fault. To carry out periodic maintenance for our customers.

You should possess a Diploma in Electronics and/or Electrical Engineering with 2-3 years’ hands-on experience in troubleshooting of card access systems, alarm systems, CCTV, etc. With good interpersonal communication skills and a valid Class 3 license. Stand-by duty is required.

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Job Description & Major Responsibilities

Service Engineers install, service, support, upgrade and maintain SCREEN equipment. Training is provided to support multiple equipment types. They perform a variety of moderate to complex assignments, diagnose equipment problems and make repairs or adjustments. Understand system parameters and interactions to allow process development and extensive electronic-mechanical troubleshooting on the equipment.

Being a Service Engineer, this person is to support the team in meeting customers’ expectations and company’s expectations. This person must be able to support machines and technically inclined. He is the direct support on machines at customers’ fab and the workforce to ensure customer satisfaction amongst our customers.

· To attend weekly meeting and presentation

· To write technical report

· To handle specific jigs during service jobs

· Assist senior colleagues to perform higher-level job like robot teaching & sub-units

· To perform 24x7 standby duties based on roster

· To perform ad-hoc shift work when needed when required.

· To perform ad-hoc delivery work

Desired Qualifications / Requirements / Competencies:

· Diploma in Electronics/Electrical /Microelectronics Engineering. Might consider ITE with experience

· Cleanroom working experience preferable but not a must

· Machine setup/installation/modification/servicing/trouble shooting/repair

· Willing to travel occasionally

· Able to work irregular hours when required

· Fresh graduates will be considered

· Proficient in Microsoft Office programs

· Demonstrate ability to work effectively with team members and customers

· Excellent troubleshooting and repair skills

· Require good communication skills, documentation and customer service skills

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Controls Engineer (PLC)
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 8.30 AM – 6 PM)
• Salary Package: Basic Salary up to $5,000 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Responsible for assisting the design of controls system and programming coding to meet the budget and time expectations as defined by the Project Manager.
• Modify controls design and other documents according to the compliance with industry standards according to customer URS.
• Develop specific program per customer and project requirements based on Company's Coding Standard.
• Participate in controls and validation activities, conduct test and debug, internal buy-off, FAT and SAT.
• Work together with the Customer, Project Manager, Assistant Project Manager, Process Manager, Design Engineers and other project team members as required.
• Communication with Customer as per project requirements.
• Collaborate with suppliers as needed.
• Update PCT and task completion accordingly.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 3 years of working experience with controls systems and programming
• Knowledge of Allen Bradley and Siemens-S7 programming

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69404 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

• Minimum 5 years experience in driving prime mover
• Class 4 license
• Minimum 5 years experience in port operations
• Must be willing to do container unstuffing at customer premises
• Flexi work hours
• Must be willing to do night shift
• Must be prepared to work on weekends and public holidays
• Clean driving record

Basic 2K with daily trip allowances or incentives

Job Description

• Industry/ Organization Type: Manufacturer – Metal Stamping
• Position Title: Principal Tooling Engineer /Principal Engineer – Tool & Die
• Working Location: West (Transport provided at Boon Lay/Pioneer)
• Working Hours: 5 days (Mon – Fri, 8.30 am – 5.30 pm)
• Salary Package: Basic up to $6000 + AWS Variable Bonus + $30 Mobile Claim
• Duration: Permanent Role

Key Responsibilities

• To lead the tooling team in problem-solving, identifying issues, and conducting root cause analysis.
• Analyze and improve stamping processes for cost reduction and quality enhancement.
• Investigate technical issues and analyze defects.
• Provide technical support to Sales and ensure tooling feasibility for customers.
• Lead cross-functional teams to streamline operations, reduce cycle times, and cut down on waste.
• Manage all documentation to comply with ISO9001, IATF16949, ISO14001, and ISO13485 standards.
• Enforce safety protocols and ensure a safe working environment while complying with industry standards.
• Develop and implement preventive maintenance plans to prolong tool life and reduce downtime.
• Promote a culture of continuous improvement using Lean Manufacturing and Six Sigma methods.
• Regularly monitor and report on key performance indicators (KPIs).
• Maintain detailed records of all tooling modifications and maintenance.
• Collaborate with Production, NPI, Quality Control, and Operations teams to optimize tooling effectiveness.
• Handle additional responsibilities as assigned by management.

APPLY NOW!!!

• At least 3 years of relevant experience.
• Minimum Diploma in Precision Engineering or equivalent technical qualification in Tool and Die making required.
• Strong commitment to safety and regulatory compliance.
• Proficient in Lean Manufacturing and process optimization.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69620 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Preliminary construction plan to the design and management of construction drawings,Management of economic and technical indicators in the past of the project,Product research and development and standardization promotion management,Drawings will be submitted to students,Technical problems in the design drawings to formulate binding sample management,Intermediate and above professional titles with registration qualification are preferred,Strong sense of responsibility at work and strong communication skills,Bachelor's degree or above, engineering background,Work experience in construction management in construction companies。Can bear hardships and work overtime at night.More than 30 years of construction experience.