• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in geotechnical and deep excavation works
• Degree in Civil Engineering
• Accredited as a RE with IES

Job Description

• Coordination with Client, Consultant, Subcontractors and Suppliers
• Building M&E Design for ACMV, FP, P&S, BMS, PA, Telecom, Lighting, Extra Low Voltage, Lightning Protection and Earthing;
• Coordination with procurement Team for tender quotation and project claims;
• Coordination with Architecture, Structure, Electrical, Process Mechanical and Control team for construction shop drawings;
• Coordination works for Building TOP/CSC, O&M Manual / As Built drawings and handover to client;
• Support Project Team for schedule or manpower arrangements;
• Supervise/coordinate installation and testing and commissioning of Building Services packages.
• Develop cost estimates for B&S equipment and B&S works, including of scheduling B&S works.

Requirements

• Bachelor’s degree in Electrical or Mechanical Engineering or related engineering discipline.
• 5 years of relevant experience in the construction industry preferably in water, wastewater, WTE projects.
• Junior position available for fresh graduates.
• Familiar with code of practice and standards in Singapore
• Experience with Revit/AutoCAD Plant 3D preferred & in other related design software/applications.
• Familiar with Microsoft Office software.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Willingness to take on responsibility and work overtime to meet deadlines.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Ability to uphold the use of standards and escalate issues in a timely fashion.
• Ability to work independently with minimal oversight.
• Experience in Selection, installation and Commissioning of Building Services equipment.
• Experience in Project Execution, Supervising and Coordination with sub-contractors, consultant and Client.
• Good technical knowledge of Building Services equipment.
• Relevant Building Services engineering experience would be advantageous

I. Air-Conditioning and Mechanical Ventilation System (ACMV)

II. Building Management System (BMS)

III. Fire Protection System

IV. Plumbing and Sanitary System

V. Structured Cabling System

VI. Emergency Voice Communication System (EVC)

VII. Integrated Security Management System (ISMS)

VIII. Electric Lifts

• Meticulous and analytical with excellent problem solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.
• Willing to work in Tuas area.

DUTIES & RESPONSIBILITIES

PLAN

· Plan and forecast project monthly and weekly installation schedules.

· Anticipate potential site issues and eliminate any risks.

· Liaise with site person-in-charge for work arrangement and manpower planning.

· Liaise with suppliers for delivery of materials and equipment by raising MERF (material- equipment-requisition-form) for approval.

DO

· Attend regular project meetings (such as site progress and co-ordination) with interested parties including clients, architect, consultants, main contractor, and sub-contractors.

· Monitor, co-ordinate and direct the execution of work with site representatives and workers for smooth workflow.

· Submit method statement, risk assessment and shop drawing.

· Submit progress report and progress claim.

CHECK

· Ensure design of Mechanical & Electrical work meets with clients’ requirements.

· Perform pre-inspection of deliverable material and equipment, and after delivery inspection for any defective goods.

· Inspect site installation work for quality and assurance.

· Conduct joint site inspection with client’s representatives.

· Conduct pre-testing and commissioning activities.

ACT

· Clearance of defects and outstanding works.

· Prepare as-built drawings for joint inspection with clients’ representatives.

· Prepare Operation & Maintenance manuals for client’s acceptance.

· Assist in the settlement of project final account including variation orders.

ADDITIONAL INFORMATION

· Candidate with experience managing LTA projects will be an added advantage.

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, and other matters concerning the site staff administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that the Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To oversee Tunnelling works
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in various tunneling works
• Degree in Civil Engineering
• Accredited as a RE with a valid 2022/2023 IES certificate
• Accredited as a RE(Tunnel) with a valid 2022/2023 IES certificate
• comfortable with 56 hour work week

• Assist in the day-to-day project management to ensure compliance to regulatory requirements.
• Assist in planning, organizing, coordinating and communicating aspects of project work activities on site from conception to completion.
• Ensuring all activities on the project are executed in accordance with contract documents, in compliance with system plans, and work procedures for the Project, and will culminate in a validatable facility.
• Coordination / schedule meetings on the daily progress of works on site.
• One of the primary contact throughout the project
• Ensuring that the project stays on schedule, meets safety objectives, and the design will result in a cost-effective facility.
• Assist in evaluating proposals submitted by vendors for the package; followed by tender interviews / clarifications and evaluate re-submissions by vendors.
• Review documentations submitted by vendor and ensure that all comments are incorporated to meet the requirement / specification of the project.
• Review contractors design documentations and coordinate with related stakeholders on process related issues.
• Prevent compliance issues by collaborating with other project teams; reviewing design data; identifying and resolving engineering design issues; identifying short-term and long-range issues; researching and identifying applicable regulatory and industry compliance standards and codes; developing compliance policies.

Requirements

• Diploma in Mechanical Engineering
• Assist Project Manager to manage project multidiscipline teams,
• Minimum 4 years of project management in construction industry is essential.
• PMP Certification would be an added advantage
• Willingness to work at Tuas area. Transportation is provided from nearest MRT station to site office

Software Engineer (ASP.net) - Automation [3770]

• Working day: Monday - Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,000 - $5,500
• Location: Woodlands Ave 9

The Software Engineer will contribute to the design, development, implementation, and maintaining of software applications. As a Software Engineer, you will collaborate with cross-functional teams, participate in the full software development lifecycle, and play a key role in creating innovative and efficient software products.

Job Responsibilities

• Design, develop of web and windows-based application and maintain software solutions in accordance with project requirements.
• Collaborate with cross-functional teams, including product managers, designers, and QA engineers, to deliver software projects on time and within scope.
• Conduct thorough testing, including unit tests and integration tests, to ensure the reliability and quality of the software.
• Participate in code reviews to ensure code quality, identify potential issues, and share knowledge.
• Troubleshoot and resolve software defects and technical issues in a timely manner.
• Assist in project management tasks, including scheduling, resource allocation, and progress tracking.
• Facilitate communication between team members, suppliers if needed.

Job Requirement:

• Bachelor’s degree in IT or Computer Engineering or a related field.
• Previous experience in a similar role in a related field is advantageous (Healthcare Domain).
• Experience in web development using ASP.net with C# and WPF desktop base application.
• Experience in MS SQL Server, SSRS. DB architecture/design is an advantage.
• Experience in JSON, RESTful API .
• Knowledge in AJAX, JavaScript, jQuery, Bootstrap and CSS.

WhatsApp: +65 82026403

Email: [email protected]

14C7279 The Supreme HR Advisory Pte Ltd

R21103770 Chu Jenn Anne

To provide technical support to Chinese-speaking end-users. Proficiency in Chinese Mandarin is a must.

*General Description*

• Provide first level technical support to end-users for desktop and laptop hardware, software basic infrastructure, and network issues.
• Diagnose and resolve desktops, laptops, printers, peripherals, basic infrastructure, and network connectivity issues.
• Install, configure, and maintain desktop operating systems, applications, and network drivers.
• Perform preventive maintenance, upgrades, and software installations on desktops, laptops, and network devices.
• Follow ITIL processes for incident, problem, and change management.
• Assist with basic infrastructure and network troubleshooting, escalating complex issues to the appropriate teams.
• Maintain accurate and up-to-date records of all desktop, infrastructure, and networkrelated activities.
• Ensure compliance with IT policies and procedures.
• Assist with the management of the asset inventory for desktops, laptops, and network devices.
• Provide training and support to end-users on the use of desktops, laptops, and basic network connectivity.
• Any other task assigned by reporting manager or team lead.

*Work Experience Requirements*

• 3 years of experience in desktop support, maintenance, and basic infrastructure/network troubleshooting.
• Basic understanding of infrastructure and network concepts, including TCP/IP, DNS, DHCP, and network protocols.
• Strong technical knowledge of desktop operating systems, applications, and hardware.
• Excellent problem-solving and troubleshooting skills.
• Strong communication and customer service skills.
• Ability to work independently as well as in a team environment.
• Flexibility to work outside of normal business hour

*To provide technical support to Chinese-speaking end-users. Proficiency in Chinese Mandarin is a must.

• Good knowlege of local carpentry skills
• Min 1 year experienced furniture / renovation Carpenter Supervisor
• Able to do site mesurement independently
• Skillful with wood working machineries router, planner, sanding machine, edge bending, post forming machine
• Lead a team of experience carpenters, train new carpenter
• Good communication skills.ability of wood -working hand drawing
• Able to withstand the outdoor harsh weathers.
• Able to work overtime to complete the project on-time.
• Able to follow the supervisor's daily instructions on-site

Job Summary

Imagine what you could do here! At Apple, new ideas have a way of becoming extraordinary products, services, and customer experiences very quickly. Bring passion and dedication to your job and there's no telling what you could accomplish. We at Apple don’t just build products — We create the kind of wonder that’s revolutionized entire industries. It’s the diversity of our people and our ideas that inspires the innovation that runs through everything we do, from amazing technology to industry-leading environmental efforts. Join Apple, and help us leave the world better than we found it! Excellent opportunity to join our Process Development team. The successful candidate will have opportunity to conduct feasibility studies, develop new process and material development for new module technologies under research and development.

Key Qualifications

• Minimum 5 years of experience in doing process R&D
• Hands-on experience in various module assembly processes such as flip chip, flex attach, pick and place, dispensing, bonding, filling, laser soldering, component cleaning, curing, plating, singulation, wafer bonding.
• Good knowledge in design of experiment (DOE), engineering statistic, root cause analysis and problem solving
• Familiarity on different metrology tools and quantitative measurement methodology
• Clear and effective written and communication skill
• Resourceful and innovative
• Knowledge and work experience in one or more of the following processes & handling such processes equipment - 1) Flip Chip bonding (Thermosonic, Thermocompression and etc) OR 2) EVO die bonder, EVG and Suss process equipment OR 3) Flex Attach (Flexible Printed Circuit Board Bonding), Solder Jetting/Laser Wire Soldering OR 4) SMT (e.g. solder printing, component pick&place, AOI, SPI and reflow)
• Knowledge on adhesive or epoxy or other bonding material is an advantage
• Experience in optical components, active alignment and high accuracy bonding process is preferred

Description

• Work on process equipments to conduct proof of concept evaluation and DOEs
• Establishment of baseline process and metrics
• Perform process characterisation
• Establish design guidelines for manufacturabilty
• Define procedures and metrologies
• Generate engineering report base on studies and evaluation
• Reporting of engineering studies to cross-functional team

Education

Degree holder in Engineering or equivalent.

To provide technical support to Chinese-speaking end-users. Proficiency in Chinese Mandarin is a must.

*General Description*

• Provide first level technical support to end-users for desktop and laptop hardware, software basic infrastructure, and network issues.
• Diagnose and resolve desktops, laptops, printers, peripherals, basic

infrastructure, and network connectivity issues.

• Install, configure, and maintain desktop operating systems, applications, and network drivers.
• Perform preventive maintenance, upgrades, and software installations on desktops, laptops, and network devices.
• Follow ITIL processes for incident, problem, and change management.
• Assist with basic infrastructure and network troubleshooting, escalating complex issues to the appropriate teams.
• Maintain accurate and up-to-date records of all desktop, infrastructure, and networkrelated activities.
• Ensure compliance with IT policies and procedures.
• Assist with the management of the asset inventory for desktops, laptops, and network devices.
• Provide training and support to end-users on the use of desktops, laptops, and basic network connectivity.
• Any other task assigned by reporting manager or team lead.

*Work Experience Requirements*

• 3 years of experience in desktop support, maintenance, and basic infrastructure/network troubleshooting.
• Basic understanding of infrastructure and network concepts, including TCP/IP, DNS, DHCP, and network protocols.
• Strong technical knowledge of desktop operating systems, applications, and hardware.
• Excellent problem-solving and troubleshooting skills.
• Strong communication and customer service skills.
• Ability to work independently as well as in a team environment.
• Flexibility to work outside of normal business hour

*To provide technical support to Chinese-speaking end-users. Proficiency in Chinese Mandarin is a must.

EUC Engineer L2

Brief Description:

End-User Support, strong in supporting all Windows, iOS, and macOS systems, applications, and networking related.

Responsibilities

• Basic help desk resolution and service desk delivery.
• Routine System administrative activities
• Resolve incidents escalated by L1/Helpdesk as per the agreed SLAs and timelines. They usually have a Run-Book/KB which they can refer to for immediate resolutions. They are also supposed to coordinate with any other support or dependency groups in case the incident has any linkage.
• Troubleshooting for Alert logs files, transaction logs and backup logs.
• Troubleshoot End to End User Devices
• Run the backups, recovery errors, respond to the request regarding the restoration of the DB
• Responsible on making backup tapes schedule and changes.
• Monitor the metric alerts, performance-related issues like high CPU utilization, Application performance, high Memory utilization, Application tuning and Query.
• tuning
• Acknowledge the request for DB stop/start, user creation and grant specific data access to user.
• System upgrades/migrations
• Making sure Inventory is updated.
• Escalates the problem to next level/Vendor.
• Good working experience in iOS devices ( iPad, MacBook, & iMac )

Requirements

• Higher Nitec and above in Information Technology or related field
• Provide IT technical service desk and onsite support for end-user services
• Support desktops, notebooks, printers and other hardware components.
• Minimum 3 years of IT (EUC) relevant experience in Apple products, applications and networks.

Contract Type: 12 Months (Renewal)
Salary: SGD2,800 to SGD3,500
Location: East Coast, Punggol
Working Hours:
i. Mon – Fri 8:30 am to 4:30 pm (onsite), Sat 9:00 am to 1:00 pm. (onsite)
ii. Mon – Fri 10:00 am to 7:00 pm (onsite)
Commencement: Immediate

Job Types: Full-time, Contract

Contract length: 12 months

Salary: $2,800.00 - $3,500.00 per month

Schedule:

• Monday to Friday

Work Location: In person

EUC Engineer (Fixed shift)

Brief Description:

End-User Support, strong in supporting all windows, iOS, and macOS systems, applications, and networking related.

Responsibilities

• Experienced in troubleshooting both desktop/laptop hardware and software.
• Single point of contact for end-users to log incident and service requests via email and hotline.
• Support user queries or issues are captured and validated for further processing.
• Coordinate with different support teams (including vendor coordination) to ensure issues are resolved with proper resolution recorded.
• Adhere to the SOP and Policy defined.
• Responsible for Call logging, Assignment, Incident Management & Coordination, Call Tracking and follow‐up until closure within the agreed SLA.
• Implementing best practices to reduce time and increase efficiency.
• Incident ownership, monitoring, tracking and communication with all parties.
• Focus on First Call resolution to ensure early closure of tickets.
• Day-to-day onsite IT support for hardware and software issues involving end-user desktops/notebooks, client’s network connectivity
• Install applications/software and apply updates/patches to desktops, notebooks and other end-user computing devices
• Preparation of desktop/notebook system image
• User account management (Account creation, deletion, modification, and reset password in accordance with Customer's process and procedures)
• Perform file backup, migration and restoration for end-users' desktops/notebooks

Requirements

• Higher Nitec and above in Information Technology or related field
• Provide IT technical service desk and onsite support for end-user services
• Support desktops, notebooks, printers and other hardware components.
• Minimum 3 years of IT (EUC) relevant experience with hands-on experience in Apple products, applications and networks.

Contract Type: 12 Months (Renewal)

Salary: SGD2,800 to SGD3,500

Location: Jurong, Suntec, East Coast, Punggol

Working Hours: Fixed shift
i. Mon – Fri 8:30 am to 4:30 pm (onsite), Sat 9:00 am to 1:00 pm. (onsite)
ii. Mon – Fri 10:00 am to 7:00 pm (onsite)

Commencement: Immediate

Job Summary

Imagine what you could do here. At Apple, new ideas have a way of becoming phenomenal products, services, and customer experiences very quickly. Bring passion and dedication to your job and there's no telling what you could accomplish! The success we are striving will be the result of very skilled people working in an environment which cultivates creativity, partnership, and thinking of old problems in new ways. If that sounds like the kind of environment that you find intriguing, then let's talk! We design, develop, and launch next-generation Sensor Technologies in Apple products. The Sensor Hardware team develops sensor solutions and technologies for a variety of Apple products such as iPhones, iPads, and Macs. The key goal of the Sensor Technology team is to enable the world’s best user-experience. New challenges arise every day that require the sharp problem-solving skills of hardworking and experienced individuals. Are you in for these challenges? The team features a collaborative and hands-on environment that fosters engineering excellence, creativity, and innovation. We are looking for Hardware Development Engineer with strong background in electrical design, characterization, data analysis, and system-level troubleshooting to help develop new optical sensors and sensing systems for future Apple products. Join us in crafting solutions the world doesn't know of yet.

Key Qualifications

• Multi-disciplinary understanding of electronics, basic optics, and general physics principles.
• Strong electrical engineering background in analog and mixed-signal system-level circuit design, especially board-level circuit
• Good knowledge of inter-module communications protocols (I2C, SPI, etc.)
• Hand on experience in hardware and circuit validation using lab measurement equipment (oscilloscope, analyzers, etc).
• Proficiency in scripting for modelling, automation, data acquisition, and data analysis (Matlab, Python, etc)
• Excellent written and verbal communication skills, and solid teamwork and leadership skills.
• Experience with production data statistical analysis and optical sensor systems mass production is a plus

Description

• Identify, implement, and document new optical sensing system metrics and specifications to deliver performance that matter to customer experience.
• Build lab bench and measurement automations to support design validation and characterization across all development phases.
• Analyze engineering and production data sets to validate system performance and design maturity.
• Lead failure analysis of optical modules and system integrations, driving corrective actions with cross-functional teams and suppliers.
• Author regular technical communications for executive and cross-functional briefings.
• Scope new optical sensing technologies and proof-of-concept investigations.
• Business travel to support product development and supplier teams as necessary.

Education

Degree in Electrical Engineering, Optics, or Physics. M.S/PhD, or B.S. with proven hardware development experience.

Service Desk Engineer (L2 skillset)

Brief Description:
Handling tickets and resolving EUC issues.

Job Description:

• Good knowledge of desktop support for both hardware and software
• Basic diagnosis and provide support to resolve issues related to M365, Active Directory, and Windows Operating System
• Single point of contact for end users to log incident and service requests via email and hotline
• Ensuring user queries or issues are captured and validated for further processing
• Co-ordinate with different support team (including vendor coordination) to ensure issue resolved with proper resolution recorded
• Follow SOP and Policy defined
• Escalates next level of technical support for incident resolution, as appropriate
• Monitors the progress and status of all open tickets toward incident resolution ad requests fulfilment
• Monitors and keeps customers/users informed of ticket status and updates at agreed intervals, till ticket closure
• Responsible to produce breaching and ageing reports for tickets logged by Service Desk
• Responsible for Call logging, Call Assignment, Incident Management & Coordination, Call Tracking and follow‐up till closure within agreed SLA
• Implementing best practices to reduce time and increase efficiency
• Incident ownership, monitoring, tracking and communication with all parties
• Focus on First Call resolution to ensure early closure of tickets

Requirements:

• Minimum higher NITEC or Diploma in IT-related disciplines
• Minimum 3 years of relevant IT service desk experience
• L2 desktop troubleshooting skillset
• Possess good customer service, communication skills and emotional intelligence
• Possess good phone etiquette

Contract Type: 12 Months (Renewal)

Salary: SGD2,800 to SGD3,500

Work Environment: School

Location: Dover & other sites

Working Hours: Office Hours Mon – Fri 8:00am to 5:30pm or 9:00am to 6.30pm

Commencement: Notice Period 1 Month or Less

Job Description:

We are seeking a skilled and motivated Cloud Engineer with expertise in Azure to join our dynamic delivery team. As a client-facing professional, you will play a pivotal role in executing daily cloud operations and implementing cloud solutions for technical customer engagements. The ideal candidate will bring a combination of hands-on experience, client handling skills, and a collaborative mindset to contribute to the success of our cloud projects.

Key Responsibilities:

• Apply technical knowledge, hands-on experience, and customer insights to effectively operate and administrate a cloud infrastructure.
• Ensure all configurations adhere to high standards of performance, security, scalability, maintainability, and appropriate reusability and reliability upon deployment, aligning with design documentation specifications.
• Implement/deploy configurations with automation principles, incorporating tools like Ansible, CloudFormation, Terraform, etc., and maintaining proper documentation for new projects.
• Participate in Cloud Migrations, particularly for VMs, using tools such as CloudEndure, Azure Migrate, with a preference for experience in migrations involving more than 20 VMs or databases.
• Collaborate with team members to engage clients in operational meetings, discussions, process improvement, and contribute to optimizations for the client’s environment.
• Stay updated on technical skills, certifications, market trends, and competitive insights, actively sharing knowledge within the technical community, especially in the cloud space.
• Resolve technical issues with proper documentation and adherence to SLAs.

Qualifications and Experience:

• Bachelor's degree in Computer Science, Information Technology, or related field.
• Proven experience in a client-facing/delivery role with a focus on cloud operations and implementations.
• Hands-on experience with Azure cloud services and infrastructure.
• Familiarity with automation tools such as Ansible, CloudFormation, Terraform, etc.
• Experience in Cloud Migrations, particularly involving VMs and databases.
• Strong problem-solving skills with the ability to provide technical solutions.
• Excellent communication and client handling skills.
• Ability to collaborate effectively within a team.

Preferred Skills:

• Azure certifications (e.g., AZ-900, AZ-104, AZ-303, AZ-304).
• Experience in maintaining technical documentation.
• Knowledge of market trends and competitive insights in the cloud space.

• Job Description (Network Engineer)
• The network engineer shall render day-to-day on-site operational management and administration of
• network and network security devices. The services shall include without limitation the following:
•  Provide Network Incident Support.
•  Provide Network Change Request support, including analyzing, plan review & implementation.
•  Implement Access Control Lists.
•  Manage the problem resolution process with maintenance support vendor on operations well as troubleshooting and resolution of network related problems.
•  Provide technical support and advice on all hardware and software in the network environment.
•  Perform routine backup and recovery for network devices.
•  Asset management and tracking.
•  Supervise and provide vendor management for external contractors.
•  Be part of the preventive maintenance team to attend to issues reported in the yard area.
•  On 24x7 rotational standby or shift duty.
•  Manage the network equipment outdoor.
• The network engineer shall have hands-on network engineering experience in installation,
• configuration and supporting network equipment including routers, switches, WLAN controllers and
• APs, and other telecommunications devices, including the following:
•  Deep understanding of OSI and TCP/IP model.
•  Proficiency in routing, switching, LAN and WLAN technologies.
•  Proficiency in networking protocols (e.g. OSPF, IPSEC, BGP, QoS, 802.11, RADIUS,
• TACACS+, DNS, DHCP)
•  Ability to perform in-depth troubleshooting and analysis of connection session issues using
• firewall logs and network analyzer tools.
•  Proficiency in Network Security concepts with proficiency in configuration of Cisco, Check Point
• and Palo Alto security products.
•  Proficiency in cellular mobile access network technologies (3G/4G/5G).
•  Proficiency in DWDM technologies, optical networking and components involved. ADVA and
• Huawei optical products in particular.
•  Understanding of Cisco Data Center Interconnect (DCI) framework and concepts like OTV, vPC.
•  Proficiency in switch virtualization technologies like Cisco’s Virtual Switching System (VSS) and
• HP’s Intelligent Resilient Framework (IRF).
•  Understanding of switch link aggregation concept and proficiency in link aggregation among
• Cisco switches, HP switches and servers.
•  Understanding of SDN, SD-WAN, ACI and NFV concepts and technologies
•  Network automation competency with Python, Netconf, Restconf, and RESTful API etc.
•  Proficiency in English language and good communication skill.
•  The engineer is required to attend the ‘Work at Height’ supervisor course and be certified within the first 3 months of service.
•  CCIE certified, with at least 3 years of relevant working experience managing enterprise scale networks (**Optional**).

EMQ2 is seeking a highly qualified Software Development Engineer to join our team and work on projects that impact the lives of many. Our products, including Enterprise Login, Payment Gateways, and Training and Learning Management Systems, are used by over 1,000,000 users. We're looking for passionate professionals to grow and learn with us. If you have more experience, you may be considered for a senior role.

Job Overview

As a software development engineer, you will have the opportunity to work with a talented team of developers and utilize the latest technologies in the industry. You will be responsible for designing and implementing efficient, scalable, maintainable, and testable software systems, collaborating closely with other engineering teams to ensure customer success. Additionally, you will work closely with product management to understand and address customer needs through technical solutions, and with QA and DevOps to adhere to industry compliance standards and deliver high-quality product releases.

In this role, you will also have the chance to work on challenging and rewarding projects that align with your personal passions and facilitate personal and professional growth. You will be able to provide feedback on internal practices to continuously strive for excellence in the work environment.

Overall, you will have the opportunity to work on projects that make a positive impact and contribute to the success of the company and its customers. You will have the chance to develop your skills and grow as a developer in a collaborative and supportive work environment that values your input and ideas.

Ideally should have:

• Strong communication skills to work with clients and team members
• Passion for learning and growing as a developer
• Grit and determination to overcome challenges and strong problem-solving skills to solve complex problems
• Ownership of work and desire to deliver high-quality solutions
• Capable of understanding the business requirements, working closely with customers, product management, and engineering to develop customer-centric solutions
• Minimally have theoretical knowledge and classroom experience in Agile Software Development Methodologies or at least experience in Software Development and Design with Java Spring Boot Framework, NodeJS, ReactJS or React Native
• Minimally have theoretical knowledge and classroom experience in developing using Software Development Frameworks, such as .NET Core, ReactJS, AngularJS or VueJS.
• Experience in using and developing with SQL databases (e.g. Microsoft SQL, MySQL)
• Experience in Source Control Management (SCM) tools such as GIT
• Open to working with web services and RESTful APIs
• Open to working with Continuous Integration and Continuous Deployment (CI/CD) tools
• Open to using and developing with Docker
• Open to using and developing with Amazon Web Services (AWS)
• Ability to work independently and collaboratively as part of a team in a flexible and fast-paced environment

Our Benefits:

• Competitive remuneration package
• Flexible work schedule and remote work options
• Career progression opportunities
• Medical Insurance Coverage
• Open & Transparent Culture with a flat hierarchy

How to Apply

Interested candidates, please send your resume to [email protected]

Our Recruitment Process

After submitting your resume, we will personally review it and invite qualified candidates to take a technical test via HackerRank. The test should take no more than 30 minutes and will be based on the skills required for the position.

If you pass the test, you will be invited for a technical interview with the hiring manager. The interview will be a 30-minute session where we will discuss your experience and knowledge in the field.

Based on the outcome of the interview, the hiring manager will decide if you are suitable for the position. If that's the case, our HR team will contact you with an offer and the next steps.

• To support Avionics Engineering matters related to product technical specification, implementing specification changes, maintenance of equipment/checkers and support analysis of customers/internal defects.
• Liaise with HQ and customer on product analysis in order to ensure the product quality and response time meets customer requirements.

1. Product Analysis

2. Technical Specification
3. Engineering work-standards related to ISO9001, AS9100, ISO 14001 & ISO 45001 requirements
4. Machines, Equipment & Tools upkeep and maintenance checks
5. Quality Assurance
6. Other ah-hoc duties assigned by Superior.

Requirements:

• Bachelor Electronics/Mechanical/Avionics/Mechatronics Engineering
• Prefer 2 years of relevant working experience.
• Entry level with good attitude are welcome to apply.

5 days work week
East Area
Electronics Manufacturing Industry

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

Job Description:

• Prepare and Monitor project cost budget, cash-flow for project, track changes in design/construction work, check variations and adjust budget projections accordingly.
• Source and Liaise with Site Personnel, Suppliers, Sub-contractors, Consultants and/or Architects for all project-related matters.
• Responsible for Progress Claims, Variation Orders, Final Accounts and Sub-contractor Progress Claims.
• Work closely with the project team in the Analysis, Evaluation and Negotiation of quotations, so as to ensure timely award of sub-contractors and suppliers.
• Ensure timely finalization of main contracts and sub-contracts.
• Provide Support in any other ad-hoc duties that may be assigned time to time.

Job Requirements:

• Candidate must possess at least a Bachelor’s Degree/ Post-Graduate Diploma/ Professional Degree in Engineering (Civil), Quantity Surveying or Facilities/ Building-related with a minimum of 3 years of relevant work experience.
• Have a positive working attitude, pro-active and meticulous in his/her work.
• Posses strong inter-personal communication & negotiation skills; able to work as a team.
• Well-versed in MS offices tools i.e. Words and Excel.
• Able to work under pressure and meet tight deadlines, either independently or in a team environment.

JOB SCOPE:

• Need draw engineering construction Drawings.
• Draw curtain wall and window Drawings
• Support the Teammate in carrying out the responsible.
• Need to go to the construction site for inspection
• Other duties assigned.

Job Requirement:

• Preferely familiar with AutoCAD.
• Self-motivated individual with a positive attitude.
• Able to multi-task and work in a fast-paced environment.
• Good Interpersonal skills

Job Description:

The IT Support Specialist / Engineer role is to provide technical support to our enterprise customers. The ideal candidate will be deployed offsite and will be on a 5-day work week schedule. He/She will also be led by an experience core members as mentor from our team.

Responsibilities:

• Monitor system logs and activity on all servers and network devices.
• Provide fault resolution and escalation (Level 1 and 2).
• Ensure Industry best practices in IT are adhered to and can withstand audits.
• Maintain accurate documentation on networks and systems.
• Prompt service report as well as Routine maintenance report.
• To perform other IT related duties when assigned by the management.

Desired Skills & Experience:

• Experience with on-site deployment, debugging and customer support.
• Communicate fluently in English - spoken and written.
• Resourcefulness, ability to problem-solve in a systematic approach.
• Good organization skill and able to work independently.
• Possess the right attitude to learn and execute with sense of urgency.
• 0-3 years of experience in relevant system and infrastructure support.

Technical Competency:

• Technical scope (Back-end) with strong network setup and debugging.
• Windows command line and IIS. SQL skills are a bonus.
• Automated logging, usage report generation and bug reporting.

Education:

• ITE / Diploma in Engineering or Information Technology preferred but not essential.
• Fresh graduate are welcome to apply.
• Technical Certification (eg: Cisco, Microsoft, VMware, etc) will be advantages.

*We regret that only shortlisted candidates will be notified.

• Ensure efficient Civil & Structural and Geotechnical design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical design matters and advises the Senior Resident Engineer (SRE) / Senior Design Engineer (SDE) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical submission and assists the SRE/SDE in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and technical support as required in the evaluations of Contractor's claifications.
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirement

• Minimum Degree in Civil/Structural Engineering or equivalent
• Minimum 3 years of relevant design management/coordination experience on projects similar in nature to the Works in the civil contract including design experience in geotechnical works for deep excavation foundation works
• Team player with good interpersonal and communication skills.

Java developer / Java programmer experience welcome apply

X 5 Permanent role ( Senior Software Engineer / Software Engineer / Project Lead )

High Basic salary + Bonus up to 6 month + Permanent position offer / 5 days work week

Responsibilities :

• Responsible for software development
• Perform software design, development, testing, integration, deployment
• Support system integration testing and user acceptance testing activities;
• Solve problem through analysis, design, experimentation and implementation.



Requirements
• Diploma / Degree in Engineering (Computer/ Telecommunication), Computer Science / Information Technology or equivalent will be preferred;
• Candidates with Diploma in Computer Studies and having good J2EE development experience are also welcomed to apply;
• Minimum 4 years’experience or above are preferred,At least 3 years hands-on experience in Java;

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779

Consultant in-charge : Lilian ( Registration No: R1983286 )

Job Description

• Industry/ Organization Type: Manufacturing/Aerospace Engineering
• Position Title: Manufacturing Engineer
• Working Location: Yio Chu Kang
• Working Hours: Monday – Friday, 8 am – 5.30 pm
• Salary Package: Up to $4000 + AWS + VB
• Duration: Permanent

Key Responsibilities

• Prepare production drawings by 2D drafting or 3D modelling using CAD software for design and build-to-print jobs.
• Carry out manufacturing process planning using ERP.
• Prepare Bills of Material from customer drawings or in-house designs.
• Provide technical support during fabrication phase in areas of machining, welding, and assembly.
• Provide technical support for outsourced parts fabrication.
• Collaborate with cross functions to ensure on-time delivery, quality and cost goals are met.
• Participate in continuous improvement projects as part of the lean manufacturing transformation.
• To use engineering tools to test and implement efficiencies in quality, manufacturing, assembly, and testing.
• To provide customer support/liaise/coordinate/follow-up with external customers on assigned projects.
• To monitor project deliverables.
• To facilitate collection of customer requirements during RFQ stage for design projects.
• Any other duties as and when assigned by the Management.

APPLY NOW!!!

• Minimum Diploma in Mechanical Engineering or other related discipline with at least 3 years of relevant experience.
• Ability to interpret engineering drawings and carry out drafting or 3D modelling work.
• Possesses good knowledge of machining processes and technologies.
• Possesses good project management and coordination skills.
• Proficient in MS Office applications, Adobe Acrobat, AutoCAD, NX and GD&T.
• Experience with CNC machining and machine measurement will be advantageous.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65848 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Technical Sales Engineer/ Product Sales Engineer (Industry: Electrical & Electronics)

• Location: Bukit Batok
• Working Days: 5 Days
• Working hours : 9am - 6pm
• Salary : SGD2,200 - 3,500 (not inclusive of transport allowance, bonus/commission)

Job Responsibilities:

• Develop a thorough understanding of our complete range of product
• Responsible for preparing quotations, proposal according to customers' requirements
• Plan sales visits, customer calls
• Service existing clients and proactively identify and develop new customers and markets
• Conduct product training and presentation to customers
• Follow up on sales lead, sales orders and deliveries
• Provide application/product support to customers and internal sales team
• Provide post sale and presale application and sales support by analyzing and recommending solutions to meet customer’s needs.
• Using technical skills to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products.

Requirement:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic/
• Passion for automation, with creative and adaptive approaches

Skills

• PLC programmable logic controller programming, touch panel, Control And Automation

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279