We are looking for a Hardware Senior Engineer to make a difference!

What will you do?

Drive further development of PLC / programmable controller offer within the scope of product maintenance (analogue and digital circuit technology as well as power electronic circuit components)

• · Preparation and provision of data as a basis for the decision of the Board of change committee (BoC) regarding technical feasibility, risks and an effort estimation
• · Fault analysis on electrical assemblies
• · Selection of suitable replacement parts for obsolete or no available electronic components
• · Circuit diagram creation/modification with ECAD tools
• · Definition of procedures and test descriptions or definition of acceptance criteria for verification tests
• · Specify, plan, carry out and document test and verification at component, function and device level
• · Internal communication/ coordination with mechanical design, PCB layout, quality department, purchasing and industrialization
• · Creation or updating of development documentation
• · Participation in national and international project and team meetings

What qualifications will make you successful?

• · Bachelor degree in Electrical, Electronic Engineering.
• · 5 years of experience in Hardware Design.
• · Deep knowledge in digital Electronic Design including highspeed constraints
• · Knowledge and experience in Cadence, Allegro
• · Analytical approach to identifying the causes of errors
• · Customer oriented and business focused

Field of work

• · Maintain support of our existing offer of PLCs and associated products
• · Understand product features based on industry standard specification
• · Understand verification test plan and test setup
• · Generate test cases, execute, and optimize for reuse
• · Perform functional and reliability tests, troubleshoot, and help resolve issues
• · Assess impact of a new feature and highlight to stake holders
• · Review information for our customer documentation.
• · Close cooperation with our multi-site R&D team, System Test teams

Your profile

• · Bachelor or Master’s degree in Computer Science, Electrical/Electronic Engineering
• · 1-2 years’ experience in design and development of verification tests in an R&D setup
• · Understanding of fieldbus protocols such as EtherNet/IP, OPCUA, Serial Line, Modbus
• · Aware of at least one of the IEC61131-3 programming languages (Structured Text, Ladder Logic, Function Block etc.)
• · Analytical skills to investigate customer issues with systematic troubleshooting skills
• · Possess good communication and interpersonal skills to collaborate with cross-functional teams in multi-cultural environment.

We are looking for “Senior Firmware Engineer” for developing our next generation communication modules and Input/output modules for industrial automation applications. You will be involved in the entire product development life cycle activities from defining the functional specification, design and implementation till release. You will be required to consistently meet project deliverables with high quality and work in a diverse team environment across the globe.

Requirements

• · Bachelor or Master’s degree in Computer Science/Electronics Engineering with minimum 8-10 years of experience in embedded software development
• · Demonstrated experience in development of PLCs and/or Bus Couplers and/or IO modules for industrial automation applications
• · Should have delivered at least 3 products from inception to release with quality
• · Hands-on experience in developing prototype and design validation techniques
• · Demonstrated programming experience with C and/or C++
• · Experience in developing applications on VxWorks
• · Hands-on experience with communication protocols (Modbus, EtherNet/IP, CAN, Serial)
• · Experienced in solving complex system problems with systematic troubleshooting skills
• · Preferred if the candidate has worked on PLC with CoDeSys environment
• · Hands-on with GIT, IAR workbench, Drivers for HW peripherals and secure coding
• · Highly motivated and able to start contributing towards deliverables within a short notice

Responsibilities:

· Implement and conduct construction equipment (mainly excavator and cranes) inspection and audit for infrastructure projects in Singapore (4 on-going projects)

· Diagnosing faults from company's heavy equipment

· Adjusting equipment and replacing faulty parts (for minor faults)

· Repairing damaged equipment parts if damages are minor

· Arranging and coordinating with machinery and suppliers for repairing damaged equipment, if damages are major

· Cleaning, lubricating and conducting routine services on equipment

· Reporting damaged or faulty equipment to Management

· Generate and report audit finding to Management

· Participate in major vendors / equipment assessment, selection and evaluation

· Review and evaluate projects to identify key issues and areas for improvement-develop and implement action plans to resolve issues

· Review site investigate report and provide technical input

· Other duties as assigned

Requirements:

· Min. 5 years' relevant working experience in equipment management

· Good communication skill

· Extensive knowledge of applicable regulations and good knowledge of equipment and machinery requirements and specifications

System & Virtualization Engineer

• Closely collaborate with Project Manager and Engineers to support the fulfillment of contract obligations within timeline, cost, and scope
• Manage and oversee project documentations and subcontractor matters
• Perform System Setup, Database setup, resolve technical & design issues
• Support for IT infrastructure comprising Microsoft OS
• Basic setup of Network switches and able to perform network check and IP address configuration of all the network devices within the project
• Installation, Debug and troubleshooting IT-related issues
• Due to site requirements, during site deployment, all mobile phones must be placed in lockers and only the in-house phone line is permitted for use.

Requirements

• Degree/ Diploma in Project Management/ Computer Science / Computer Engineering in Information Technology, Information Systems, IT Security or Equivalent.
• Good interpersonal skills, strong organizational and coordination skills
• Experience in Project Management, IT Management Systems Deployment or Equivalent experience
• Proficient in Database, Cybersecurity and Windows OS Virtualization.

Knowledge in any of the following will be a strong plus:

A. SQL management studio application and database table,

B. Vulnerabilities Assessment,

C. Software development knowledge

D. Setup and install access control system e.g., key manage system, CCTV, card reader or gantry.

E. Redundancy technology knowledge e.g., failover clustering, Nic teaming etc.

F. Network Switch Configuration

• Able to perform work independently and a team player.

Job Description:

• Primary responsibility is to prepare test & qualification design activities in accordance to ESG design process with focus on quick turn-around time to respond to RFQs and Sales Orders. The job scope will cover the development of the test plan/documents, creation and execution the test procedures for new opto-mechanical assembly products at the FAT phase prior transferring these activities to the Process Engineering (PE) team for production manufacturing;
• Design and perform qualification to the Test set up intended for the FAT Build;
• Provide technical support to production on the maintenance of the relevant test equipment as well as for improvement programs (such as yield, efficiency, etc.) on the test procedure and setup;
• Collects and analyzes test data, summarizes results, and presents test results for review with internal and external customers;
• Ensure proper test documentation (design reports, test plans and results etc.), life cycle and data management in Product Data Management (PDM) system;
• Support Operations as a technical resource on product design failure analysis and resolution support. Represent the R&D team for testing during all engineering builds and production ramp-ups;
• Special projects and other duties as assigned.

Job Requirements:

• Bachelor’s Degree in Science, Engineering or related technical field. Candidates with a BSc or MSc in Optical Engineering/Optics, Mechanical Engineering or equivalent are preferred;
• Minimum of 2 years experience required in Optics Testing related applications. Candidates applying for a Senior Engineer position will require a minimum of 4 years relevant experience;
• Good knowledge of optical engineering and optical testing principles;
• Hands-on experience with mounting and alignment of optical components required;
• Capability to design test tooling and set-up required;
• Analytical ability to trouble-shoot problems, perform root cause analysis and generate solutions.
• Proficient in data collection, statistical analysis and report generation required and use of six sigma principles to solve problems preferred;
• Candidates with proficiency in Zemax or Code V are preferred;
• Candidates with Solidworks or AutoCAD experience are preferred;
• Candidates with Quality Standards (such as ISO9001, ISO14001, AS9100, ISO13485) knowledge and audit experience are preferred;
• Good organizational and communications skills required.

Overview:

We are looking for a dedicated and experienced M&E (Mechanical & Electrical) Supervisor to join our construction team. The successful candidate will oversee the installation, maintenance, and operation of M&E systems, ensuring that all work is completed according to specifications, on time, and within budget.

Key Responsibilities:

• Supervision and Coordination
• Oversee and manage M&E installation activities on site.
• Coordinate with contractors, subcontractors, and suppliers to ensure smooth workflow.
• Schedule and allocate tasks to ensure timely completion of work.

Quality Control:

• Conduct regular inspections of M&E works to ensure compliance with specifications and standards.
• Identify and rectify any defects or issues in M&E installations.
• Ensure that all work adheres to local building codes and safety regulations.

Project Management:

• Assist the M&E Engineer in planning and executing M&E tasks.
• Monitor project progress and report any delays or issues to the project manager.
• Maintain accurate records of work performed and materials used.

Technical Support:

• Provide technical guidance and support to site workers.
• Resolve any technical problems that arise during the installation process.
• Ensure all M&E equipment and systems are installed correctly and function as intended.

Requirements:

• Diploma or technical certification in Mechanical Engineering, Electrical Engineering, or a related field.

Experience:

• Minimum of 3 years of supervisory experience in M&E works within the construction industry.
• Hands-on experience with M&E systems and installations.

Skills:

• Strong understanding of M&E systems and components.
• Excellent leadership and team management skills.
• Ability to read and interpret M&E drawings and specifications.
• Strong problem-solving skills and attention to detail.
• Good communication and interpersonal skills.

Certifications:

• Safety Supervisor Certificate or other relevant certifications are advantageous.

How to Apply:

Interested candidates are invited to submit their resume and cover letter detailing their relevant experience and qualifications to [email protected].

Digital Trust Centre (DTC) is looking for a candidate to join them as a Research Engineer II.

Key Responsibilities:

• Conduct cutting-edge research in large language models, translating theoretical algorithms, frameworks, and methodologies into practical, working prototypes that demonstrate potential product applications.
• Collaborate closely with researchers and engineers to design and implement system architectures and software solutions that transition research findings into scalable, deployable products.
• Develop and build tools and frameworks to facilitate the transfer of LLM capabilities to industry partners, showcasing the practical value and impact of the research outcomes.
• Create and maintain comprehensive technical documentation, including white papers, presentations, and tutorials, to disseminate knowledge to a broader audience and enhance overall expertise in these emerging areas.
• Engage with international research communities and partners to stay abreast of the latest advancements in machine unlearning, contributing to discussions, collaborations, and initiatives that elevate Singapore’s position in the global AI and privacy research landscape.

Job Requirements:

• Minimum Masters’s degree in computer science/ engineering or related fields.
• Proficiency in Python is a must. Experience with other programming languages such as Java, C/C++, or Go, and frameworks like PyTorch or TensorFlow, is highly advantageous.
• Experience in developing and deploying machine learning models, particularly in natural language processing (NLP) and large language models (LLMs), including tasks such as data preprocessing, feature extraction, model training, and evaluation.
• Strong knowledge of machine learning and deep learning techniques, including knowledge graphs, machine unlearning, and AI testing.
• Proficiency in working with common Linux distributions (e.g., Ubuntu, CentOS) and familiarity with shell scripting and command-line tools.
• Experience with cloud platforms (AWS, GCP, Azure) and containerization technologies (Docker, Kubernetes) is a must.
• Experience with version control systems (e.g., Git) and collaborative development tools.
• Experience in developing ML systems from end to end, including data exploration, feature engineering, model training/evaluation will be advantageous.
• Ability to communicate complex technical concepts effectively to both technical and non-technical stakeholders, bridging the gap between research and practical application.
• Strong analytical and problem-solving skills, with a focus on developing innovative solutions for LLMs.
• Self-motivated and able to work independently, managing multiple tasks and projects in a fast-paced environment.
• Strong collaborative skills, with experience working in cross-functional teams.
• Keen attention to detail and commitment to high-quality deliverables.
• Understanding of ethical considerations and best practices in AI research, particularly concerning data privacy and security.
• Ability to code-switch effortlessly between talking business and talking tech, and can help stakeholders, engineers, and businesses easily understand difficult research tech concepts.
• Experience in AI model testing methodologies, including robustness, fairness, and explainability assessments, as well as understanding data privacy and security considerations in AI.
• Good understanding of relational database and Unix shell scripting skills.

We regret to inform that only shortlisted candidates will be notified.

1. Job scope

• Ensure M&E works are carried out according to specifications/drawings
• Inform the Project Director / Project Manager on any technical / site problems about M&E works;
• Supervise the progress of M&E works on site;
• Coordination of sub-contractor's M&E work and ensuring the work is on schedule.
• Work closely to the clients, consultants and sub-contractors on technical matters
• Supervise and Coordinate M&E services work and work closely with other department staff to meet the project timelines
• Conduct in detailed, M&E coordination with all specialist contractors
• Carry out testing and commission of M&E work; Execute mechanical and electrical works in construction
• Supervise day-to-day site works and manage sub-con/in progress production planning & build.
• Handle the project supervision and documentation
• Manage M&E subcontractors’ submission of method statements, drawings, materials, samples, and work progress
• Dealing with troubleshooting

1. Job Requirements:

• Diploma in Mechanical or Electrical Engineering
• Basic knowledge of computer software e.g. Microsoft Word, Excel, Auto CAD, email, etc
• Knowledge of reading building construction drawings
• 3-5 years of working experience in main-con, preferably in all the projects

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Job Responsibilities:

• Liaise with the construction team to prepare documents for Request for Quotation (RFQ) or Open Tender.
• Source potential tenderers/subcontractors and send out invitations for RFQs.
• Assist on management of materials and equipment at the construction site.
• Coordinate queries and clarifications between tenderers and construction team during RFQ stage.
• Coordinate post-tender interviews between tenderers, construction team, QS team and contracts team.
• Assist QS manager and contracts manager with quantity surveying matters relevant to Sub-Contract, Works Order and Purchase Order.
• Assist contracts team in administration of subcontracts.
• Handle payment requests received from subcontractors and suppliers.
• Responsible for quantity calculation of construction drawings, preliminary material research and market survey.
• Assist to evaluate and process vendor claims as needed.
• Any other adhoc tasks assigned by QS Manager / Contracts Manager.

Job Requirements:

• Min. Bachelor’s Degree in Engineering or related field of studies.
• At least 3 years of experience, preferably in Quantity Surveying.
• Marine Project is prefered.
• Willing to work at West Region.
• Able to work under pressure and work under minimal supervision.

Highlights:

• Location - North (Woodlands/ Admiralty)
• Basic + AWS + Profit Sharing
• Group Consolidation/ Budgeting/ Forecasting
• Construction/ Engineering
• FRS115 & FRS116

Job Responsibilities:

• Report directly to the Managing Director.
• Oversee and coordinate work within the Finance Department, ensuring proper recording, control and compliance.
• Perform monthly accounts receivable credit reviews and implement credit control measures.
• Authorize all online banking payments, including GIRO, PayNow, TT and FAST transactions.
• Handle cash and bank transactions while maintaining proper records and ensuring accurate banking procedures.
• Prepare monthly cash flow forecasts, monitor work-in-progress reports and project costing.
• Review and analyze group’s monthly financial reports.
• Prepare group’s annual financial reports and budget forecasts.
• Prepare group’s monthly and quarterly consolidation packages and ensure deadlines are met.
• Liaise with internal and external auditors, company secretaries, tax agents and bankers.
• Perform other duties as assigned.

Job Specification:

• University Degree, ACCA, or CPA qualification.
• Must have experience in construction/ engineering industry
• Minimum 5 years of accounting experience, with at least 2 years at a managerial level.
• Knowledge of international accounting standards e.g FRS115 and FRS116.

HOW TO APPLY:

Interested applicants, please email to “[email protected]”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Pierre Chung Yih Shern

EA Personnel Reg No: R22111092

A Construction Company in Woodlands have vacancy for Building Construction Engineer

Job Scope

· Quality control and inspection

· Prepare and submit weekly and monthly site progress report to management

· Prepare method statement

· Safety regulations

· Meeting with clients

· Supervising your Construction Team

· Controlling Materials Order and Usage

· Improving Company's Work Quality

· All other necessary works

· Attend Site Survey and prepare site drawings

· Coordinate with officers, main cons, clients etc

· Attend kick off meeting

Criteria

· At least 2 years working experience in air-conditioning & mechanical ventilation system

· Able to work independently and work as a project team

· Able to carry out prescribed work in a safe, competent or compliant matter.

· Minimum diploma or Mechanical Engineering

· Possession of outstanding written and verbal communication skills, as well as having strong interpersonal skills

· Self-motivated individual, with phenomenal confidence working with diverse partner groups

· Able to perform using AutoCad and other drawing applications

· Good team player and handle stress and deadlines.

· Candidates with more experience may be considered for more senior positions.

· We offer attractive remuneration package to the right candidate.

· Interested candidates are invited to submit detailed resume stating:-

· Current salary;

· Expected salary;

· Reasons of leaving and

· Date of availability.

Benefits

· High Potential of growth

· Medical and dental coverage

· Year end remuneration benefits

We regret that only shortlisted candidates will be notified.

The Environmental Control Officer is responsible for identifying any environmental health irregularities and recommend measures in maintaining good environmental health.

A summary of the responsibilities of this position are, and not limited to, as follows:

Job Description

• Establish the objectives and process necessary to deliver results in accordance with the organization’s environmental policy
• Check, monitor and measure processes against environmental policy, objectives, targets, legal and other requirements and reports the results
• Take actions to continually improve performance of the environmental management system
• Inspect the construction site to ensure all facilities and equipment relevant to the maintenance of environmental health are in proper working condition and do not pose any environmental health hazard
• Highlight environmental health irregularities such as mosquito and fly breeding, rodent infestation, noise/dust/smoke/water pollution, poor housekeeping, earth littering, poor refuse management, poor maintenance of sanitary facilities etc. with the Site Management team and recommend rectification measures
• Assist authorities to investigate any outbreaks of infectious, vector borne or food borne diseases at site
• Investigate public complaints on environmental issues
• Organise campaigns, training courses and other promotional activities to develop and sustain the interests of workers in maintaining good environmental health standards at site

Value Add of Position

• Ability to anticipate potential environmental health irregularities in site works
• Use of construction technologies or innovative green solutions to address energy efficiency, environmental concerns at site

Technical Competencies

• Environmental Management System (ISO 14001)
• Environmental Legislation
• Green and Gracious Builder Scheme
• Environmental Impact Assessments

Qualifications and Education Requirements

• Education: Minimum a Technical Diploma from a recognized polytechnic
• Experience: Minimum 3 years of relevant experience in environmental engineering, environmental health or related
• Registered Environmental Control Officer with National Environment Agency
• Earth Control Measures Officer course
• Introduction to Waste Management in Singapore
• Certification in Manage Hazardous Substances
• Certification in Control Noise and Vibration

* Able to design and Project management, Monitor site progress of work.

* Willing to work at island wide.

* Working experience at least 5 years and above.

* Able to work independent with minimum monitor.

* Good in team player and communication.

* Good remuneration.

* Can work independent and start work immediate.

Job Responsibilities:

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Job Requirements:

• Degree in Mechanical Engineering
• Healthcare/Data Centre experience will be advantageous.
• Strong design experience in Fire Safety
• Minimum 5 years of relevant design experience
• Good understanding of Singapore Code of Practice and local authority submission process

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Job Description

• Provide techinical support to our customers on Data Security product suite as per SLA.
• Support system deployment and User acceptance Testing.
• Perform troubleshooting and issue resolution.
• Work closely with internal stakeholders to provide timely resolution for our customer.
• Carry out planned upgrade and migration work.
• Review and improve process flow as part of continuous improvement initiatives.
• Responsible for maintaining technical documentations in the Knowledge Base.

Qualifications:

• Prior experience as a Technical Support Engineer.
• Prior experience in a customer-facing role with a focus on IT system delivery .
• Strong technical knowledge in IT infrastructure technologies, including networking, virtualization, and related areas.
• Strong problem-solving and troubleshooting skills, with the ability to analyze complex technical issues.
• Excellent communication and interpersonal skills, ability to engage both technical and non-technical stakeholders.
• Proactive attitude and ability to work independently, managing multiple customer accounts and projects simultaneously.
• Experience in supporting government agency is preferred.
• Prior experience in Cryptography would be advantageous.
• Only Singaporean need apply.

Our Client:

Our client is an established Manufacturing company, headquartered in Japan. They are currently looking for an energetic Sales Executive/ Sales Engineer to join their growing team in Singapore.

The Responsibilities:

• Maintain organized sales records and report month-end goal-setting to the senior management team
• Support management by completing orders and keeping customers informed of delays and delivery dates
• Coordinating the sales team by managing schedules, filing important documents, and communicating relevant information
• Ensuring the adequacy of sales-related equipment or material
• Responding to complaints from customers and giving after-sales support when requested
• Handle the processing of all orders with accuracy and timeliness
• Establish the planning process for the company by converting the Sales forecast into a feasible manufacturing plan
• Oversee preparation and timely release of raw materials to production to meet production orders. Track usage of raw materials to production
• Prepare monthly reports on the performance of production and highlight issues and bottlenecks that may potentially impact the achievement of the production schedule and customer satisfaction
• Performs time studies to determine how long certain tasks take
• Preparation of various monthly reports for Management (Sale & Purchase Invoice Summary, Sales & Sales Profit Report, Sale by Segment Sale Report, Unit Price Calculation, Bi-yearly Sales Budget Report, etc.)
• Ad hoc duties as assigned by management

The Requirements:

• 2 - 5 years of sales/sales engineer experience in a manufacturing field
• Ability to adapt in the fast-paced working environment
• A team leader & player
• Able to travel, usually to Malaysia, Thailand, Japan, and Shanghai
• Able to converse in Mandarin to communicate with the native Chinese speakers from China office
• Able to converse in Japanese will be an added advantage as you will need to liaise with native Japanese speakers from Japan HQ as well

RGF Privacy Policy – https://www.singapore.rgf-professional.com/privacy-policy

Disclaimer: The Company complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. All qualified applicants will be considered for the position regardless of their age, race, religion, nationality, marital status, or family responsibilities. A more detailed discussion of the TGFEP is available on the Tripartite Alliance for Fair and Progressive Employment Practices (TAFEP) website at https://www.tal.sg/tafep.

JO Reference: 114170

The Project Manager is responsible for leading the project team to complete projects on time, within budget and meeting quality parameters in line with the standards and expectations of Land Transport Authority (LTA) and relevant authorities.

Description:

A summary of the responsibilities of this position are, and not limited to, as follows:

• Overall in charge and manage the coordination works for civil structural, architecture and M & E activities.
• Provide technical expertise as required on project.
• Responsible for managing and positively developing relationships between Woh Hup (WH) & Client(s).
• Line Management of employees and driving employees’ productivity and performance.
• Responsible for managing job profitability of assigned projects.
• Guidance on team in project works in terms of quality and safety standards.
• Monitor and ensure that site progress is in accordance to master programme with no delay in works and proper work sequencing.
• Efficient management of resources and materials.
• Adherence to safety practices in the work place.

Value Add of Position

• Excellent client facing with strong people orientation ability to build and develop positive relations with authorities like LTA & Consultants.
• Possess strong skill in developing and delivering effective communication to different audiences.
• Able to lead and inspire high performance, to ensure project plans are implemented on a timely, efficient and effective basis.
• Familar with ultilities and services diversion procedure

Skills and Requirements

• Education: Degree in Civil Engineering from a recognized University
• Experience: At least 10 years of experience in delivering large scale projects in civil and infrastructure
• Experience in LTA underground projects (with A&A Works) required
• Technical expertise and knowledge in Structural, Architectural Design and Contracts Administration with established experience and proven ability to deliver projects
• Proven track record of managing teams and delivering projects from start to hand-over
• Extensive experience within a construction environment demonstrating accountability and ability to meet commitments through key internal stakeholders, clients and staff at all levels
• Microsoft office skills and in particular, use of Microsoft Project

Job Descriptions

1. Plan, execute and supervise all Facilities maintenance related work services.
2. Manage Building / Facilities / M&E works and services for effective and efficient operations facilities performance.
3. Coordinate and supervise the M&E installation and maintenance work if needed.
4. Working closely with the client, sub-contractors, and the facilities team to resolve any technical issues. Attend M&E related meetings and involve in the preparation of related reports.
5. Assist in planning, controlling and coordinating of mechanical, electrical works.
6. Schedule, monitor and supervise the progress of works .
7. Prepare and follow- up closely on the client inquiries and quotations.
8. Follow the company internal work processes and documentation.
9. Build and maintain good client relationships and uphold high quality standards.

Job Requirements

1. Minimum Diploma or Degree in Engineering or Building / Real Estate/ Facilities Management or any related qualifications.
2. Facilities Maintenance operations background with at least 3 years of experience will be an added advantage.

5.5 days work week.

Who we are

Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. But we’re always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative, but work well within a team.

Job Description

As a Workshop Engineer, the main role will be conducted within an office-based position at Fugro in Singapore office. He will serve as the primary support contact for the mechanical aspects of all mobile / fixed drilling equipment. He will play a pivotal role in the planning and budgeting for preventive maintenance and upgrades which will include liaising between many internal and external departments. Additionally, he will be responsible for supervising routine mechanical tasks carried out by rig mechanics on the ships.

Day-to-day tasks will include:

• Assist with the preparation and planning for the mechanical equipment inspection and testing that will be carried out throughout the year in the workshop facility.
• Assist the equipment resource manager with the planning and implementation of the upgrades relating to equipment including modification works.
• Participate and execute mobilization activities of mechanical equipment, including development of procedures, task plans, as instructed.
• Plan and arrange contractors for repairs & maintenance and assigned activities on the vessel / workshop and to maintain machines, equipment, and tools, as assigned by equipment resource manager.
• Effectively remotely supervise the rig mechanics onboard vessels ensuring that all repair and maintenance including preventive maintenance for offshore drill rigs and geotechnical equipment on the vessels is carried out timely and effectively.
• Carry out periodical inspections of the geotechnical equipment onboard the ships and in Warehouse to ensure running and safety of the plant.
• Identify in advance need of additional support of contractors for critical Mobilisation / Repair activities concerning mechanical equipment such as Winches, Power packs, etc.
• Ensure maintenance records, certification and spare part information of the geotechnical equipment is filed in the planned maintenance system and available for future referral.
• Develop a comprehensive spares package for the Geotech equipment and effectively stock control it during ongoing operations; equipment to be topped and re-ordered when required.
• Ensure that all work performed complies with the requirements of the Project and is carried out in accordance with the rules and the methods of the Company.
• Ensure that all aspects of project Safety, Health & Quality remain prioritised at the work sites.
• Stand in as the emergency point of contact to support the field staff in troubleshooting issues on mechanical and hydraulic equipment.
• Ensure spares & consumables for the geotechnical equipment required on top of vessel standard consumables are defined and updated in STAR PMS onboard Fugro managed / chartered vessels for mechanical equipment.
• Supporting activities and tasks delegated by equipment resource manager in equipment maintenance & reliability audit requirements.

About You
The Workshop Engineer will be a qualified and experienced Mechanical Engineer with a detailed operational and maintenance knowledge of static & rotating mechanical (including high pressure hydraulic & Pneumatic) systems. He would have a minimum 8 years of hands-on experience on servicing hydraulic and mechanical equipment used in Marine & Offshore industry, of which minimum 3 years of experience is working on hydraulic equipment used on offshore facilities such as MODU’s, Rigs. The role is responsible for the day-to-day supervision of the Offshore Geotechnical drilling and Geophysical mechanical equipment’s maintenance. The role supports operational sites (vessels with hydraulic and mechanical equipment) with advice and direction whilst maximising the availability of plant and equipment through maintenance-based planning and organisation.

What we offer

• Competitive salary with Annual Wage Supplement
• Generous paid-leave
• Career & training opportunities (international opportunities possible)
• Company shuttle from various pick-up at MRT stations across Singapore
• Collective health insurance and outpatient benefits;
• Employee Assistance Programme (EAP) to provide help when you need extra support.
• Additional benefits: Long Service Awards, Professional Membership, Weekly fitness-related activities, etc)

**Benefits may vary according to position/contract/grade level.

Our view on diversity, equity and inclusion

At Fugro, our people are our superpower. Their variety of viewpoints, experiences, knowledge and talents give us collective strength. Distinctive beliefs and diverse backgrounds are therefore welcome, but discrimination, harassment, inappropriate behaviour and unfair treatment are not. Everybody is to be well-supported and treated fairly. And everyone must be valued and have their voice heard. Crucially, we believe that getting this right brings a sense of belonging, of safety and acceptance, that makes us feel more connected to Fugro’s purpose ‘together create a safe and liveable world’ – and to each other.

How to apply

• Please include your latest resume in the application.
• Please describe your working rights in Singapore (work pass sponsorship is subject to quota and availability).
• We regret to inform that we will only process applications made via our Careers website (and other linked portals) and only shortlisted applicants will be contacted.

We are seeking a highly skilled Cloud Engineer with extensive experience in cloud infrastructure, storage administration, and multi-vendor environments. The ideal candidate will have hands-on expertise in managing AWS and Azure platforms, optimizing cloud resources, and ensuring high availability and performance of cloud-based systems. This role involves managing cloud deployments, performing storage performance tuning, and working closely with cross-functional teams for seamless project delivery.

Key Responsibilities:

• Cloud Infrastructure Management Administration and management of AWS and Azure cloud platforms.
• Hands-on experience with core AWS services: EC2, S3, Route53, CloudFormation, Elastic IPs, VPC, RDS, and CloudWatch.
• Configuring and managing Elastic Load Balancers (ELB) with EC2 Auto Scaling groups for high availability and scalability.
• Creating and managing multi-AZ VPC instances for fault tolerance and disaster recovery.
• Expertise in storage solutions from multiple vendors, including EMC, Hitachi (AMS, HUS, VSP, Gx00 series), and NetApp.
• Performance tuning, capacity planning, and optimization of storage arrays to ensure efficient data management.
• Troubleshooting and resolving complex storage issues.
• Cloud Optimization and PerformanceOptimizing AWS Elastic Block Store (EBS) volumes based on client requirements, ensuring cost efficiency and performance.
  Monitoring cloud resource utilization and implementing best practices to improve system performance.
• Security and ComplianceImplementing cloud security best practices, including identity and access management (IAM), VPC security groups, and encryption.
• Ensuring compliance with organizational and industry standards for cloud infrastructure.
  

Required Skills:

• Strong expertise in AWS services (EC2, S3, Route53, RDS, VPC, ELB, CloudFormation).
• Good understanding of Azure cloud services.
• Extensive experience in Hitachi, EMC, and NetApp storage solutions.
• Knowledge of incident management and change management processes.
• Strong analytical skills with the ability to troubleshoot and resolve complex issues.
• Experience in performance tuning of storage and cloud systems.
• Excellent communication, planning, and organizational skills.
• Proactive approach with a strong sense of initiative and problem-solving mindset.

Preferred Qualifications:

• Certification in AWS (Solutions Architect/DevOps Engineer) or Azure.
• Experience in automating cloud deployments using scripting or tools (e.g., CloudFormation, Terraform).
• Familiarity with containerization technologies like Docker and Kubernetes.
• Basic understanding of networking concepts in cloud environments.

Additional Information:

• Employment Type: Contract
• Experience: 5+ years in cloud and storage administration
• Support: Require weekeed support during implementation

We are recruiting a Quantity Surveyor to join our team working for one of the largest HVAC Company located in North area. The company designs, fabricates and installs air con ducting for commercial.

We are seeking a highly motivated and experienced individual to join our team. The ideal candidate will have a strong understanding of construction costs and contracts, as well as excellent communication and negotiation skills.

If you are interested in this position, please submit your resume and cover letter to [email protected] for consideration. We look forward to hearing from you.

Job Role:
 Take responsibility for a number of projects
 Understanding of technical drawings
 Produce reports as and when required
 Basic knowledge and awareness of contracts
 Be responsible for the collection of retention
 Liaise with client / suppliers as necessary
 To assist and work closely with the team
 The ideal candidate must be a good team player, highly motivated and enjoy working in a fast paced working environment

Salary - Negotiable (to be discussed at interview stage)

Job Type: Full-time
Salary: $3300 to $4000

Education:
 Bachelor's (preferred)

Experience: : 3 year (Singaporean or PR)

Roles & Responsibilities

· Prepare journal entries and posting

· Communicate with clients, handle queries and request

· Responsible for AR & AP function and monthly reconciliation

· Responsible for progress claim

· Provide day to day assistance, and administrative and audit related activities

· Prepare invoices and credit notes

· Assist in month-end and year-end closing

· GST preparation

Job Requirements:

· Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Finance/Accountancy/Banking or equivalent.

· Required skill(s): accounts software - Quick book, basic accounting, Communication Skill, MS Excel and Words

· At least 3 year(s) of working experience in the related field is required for this position.

· Able to start immediately would be advantage.

· Able to work independently

Who we are

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

About Beca

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are a growing engineering consulting company based in Singapore, seeking for a high performing professional to join us as an Executive Engineer – Mechanical (Building Services).

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Under the supervision of Senior Engineers, to perform initial engineering task on the mechanical services detailed design for building projects
• To prepare submission to authorities for approval of design
• To attend to project meeting with Client, PM and Consultants from other disciplines
• To attend site project meeting and site inspection and respond to technical queries
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants
• Handle client liaison and reporting
• Liaise with authorities on plans submission and compliance

Key Requirements

• Degree in a Mechanical Engineering recognised by Professional Engineers Board, Singapore will be an advantage
• Minimum 3 years’ experience in the design & supervision of building service projects (Those with 5 years’ experience and/or Certified Professional Engineers will be considered for a senior position).
• Experience in leading roles for design & design management of residential, commercial, institutional or hotel projects will be an advantage
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures
• Competent user of relevant engineering software, Building Information Modelling and Navisworks
• Excellent written & spoken communication skills in English
• Able to work independently & exercise initiative
• Excellent delegation and communication skills, which see you enlist the help of others to meet objectives
• A team, client and delivery focused working style
• Experience in a consulting environment

Job Highlights

• Career Advancement
• Medical Allowance
• AWS & Variable Bonus

Ready to make a move?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

• Conducting assessments and research to determine system requirements
• Drawing up schematics, diagrams and layouts for new systems
• Testing newly designed systems and making modifications as needed
• Developing project proposals that establish expected costs, timelines and potential risks
• Overseeing construction projects to ensure the finished work meets all design requirements
• Performing initial quality control and ongoing maintenance inspections on vessels
• Drafting reports for management and sales teams
• Adhering to maritime safety rules and regulations when developing new systems