Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Responsibilities:

• Reviews technical specifications, drawings, procedures, and standards pertaining to project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents, and weekly update drawing register form documents controller and distribute to project Quality Assurance personnel.
• Administrates the project's internal quality audit to ensure compliance with the project quality plan.
• Monitors the inspection and documentation activities of the Quality Assurance Inspector to ensure compliance with the inspection test plan and project quality requirements
• Resolves quality-related issues arising from subcontractor and in-house production
• Ensures protection and preservation of various systems
• Ensures updates on electrical completion and mechanical completion progress in the project database
• Assigns the systems to be tested by the various supervisors and technicians involved in the operation
• Reviews the quality work processes to enhance efficiency and productivity
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, Quality Assurance Department, and vendors
• Reports non-conformance and issue improvement notes where necessary
• Any other assigned duties and responsibilities

Requirements:

• Degree in Naval Architecture, Marine and Offshore or Electrical Engineering
• Minimum 3 years of relevant experience in Quality Assurance working experience, and the offshore or marine industry

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description & Requirements

Driver Responsibilities:

• Loading, transporting, and delivering goods in a safe, timely manner.
• Adhering to assigned routes and following time schedules.
• Abiding by all transportation laws and maintaining a safe driving record.
• Must have a good experience in driving

Driver Requirements:

• Clean driving record.
• Willingness to adhere to assigned routes, schedules, safety procedures, and transportation laws.
• Long working period: Monday - Saturday

Responsibilities

Mechanical

• Prepares list of daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Supervises job coordination, monitor conformity towards quality, environmental and safety management system policies and procedure.
• Monitors and ensure all mechanical works are carried out according to the latest revision mechanical drawing and complies with contract specification, class requirements and quality management system.
• Arranges coordinate and carry out all the inspection inspections and testing with customer representative and / or classification surveyor as per the Inspection and Test Plan (ITP).
• Performs material equipment incoming are as per Vendor document;
• Verifies tools and equipment used are as per procedures;
• Familiarizes with mechanical inspection process;
• Verifies NDT are done as per approved NDT plan & procedures.
• Verifies preservation are being performed as per preservation plan & procedures.
• Monitors the progress of work and report the status of completion of the official inspections such as accepted, rejected, postponed or cancelled to the respective project manager.
• Prepares review and document inspection records, certificates and NDT reports for the submission to relevant party.
• Checks and endorse inspection record prior to issue to customers.
• Ensures subordinates comply with company’s procedure and work instructions.
• Reports any non-conformance (NC) and issue corrective action request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Maintains good relationship with the customers as to full fill part of company’s core value to ensure customer satisfaction.
• Implements and compile the monthly key performance indicators (KPI) related to mechanical.
• Verifies mechanical MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.

Dimension Controller

• Implements dimensional control methods and procedures throughout the fabrication and integration process of the modules to meet the requirements of project specifications and codes.
• Conducts dimensional checking using latest electronic total stations before and after welding of the main deck frame and main column of the modules to ensure that the dimensions are within specifications.
• Reviews design drawings, do necessary best fit calculations, prepare professional dimensional control reports using AutoCAD and get approval by the clients and/or certifying authority.
• Maintains dimensional survey equipment and keep proper documentation of dimensional control reports to meet project requirements and QA/QC audit standards.
• Gives guidance and advice to sub-contractors on how they can increase their productivity.
• Liaises with key stakeholders including Client on the dimensional control methods, acceptance criteria in accordance to project requirements.
• Prepares and compile final dimensional control survey reports as part of the final documentation report.

Electrical

• Takes charge of projects, coordinate and carry out all E& I QA/QC activities for the projects including hazardous zone equipment’s inspection (ATEX/CompEx/IECEx Certified).
• Review and evaluate the drawings as per Classification Societies and Client’s requirement.
• Prepares the QA procedures and get it approved with Classification Societies and Client.
• Witness the testing of HV/LV circuit breaker/starter, neutral earthing resister/fuses and cable megger-ing.
• Coordinates all termination inspection of electrical installation of equipment.
• Preparations of electrical or mechanical completion for equipment.
• Carries out the inspection and testing with Class Surveyors and Class Representatives.
• Ensures all quality control documents are compiled and information’s are handed over for as-build.
• Coordinates daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Monitors and ensure all work is carried out according to the latest revision electrical drawing and complies with contract specifications, Class requirements and Quality Management System procedures.
• Checks and endorse inspection record prior to issue to Client.
• Ensures subordinates comply with Company’s procedure and work instruction
• Reports any non-conformance (NC) and issue Corrective Action Request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Coordinates with yard QA/QC team for all Quality documentation submission to SCM with the construction completion.
• Maintains good relationship with the customers as to full fill part of company’s core value to ensure customer satisfaction.
• Implements and compile the monthly Key Performance Indicators (KPI) related to electrical and instrumentation.
• Verifies electrical and instrumentation MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.
• Performs others duties as signed by the superior(s) from time-to-time.

Coating

• Goods knowledge of all international surface preparation standards, painting/coating application standards, inspection standards, contract, specifications, material technical data sheet, material safety data sheet, documentation etc.
• Witness prequalification of painting system, painter, blaster and adhesion testing subjected for project approval before commencement of painting activities.
• Coordinates in-coming coating materials (e.g. paints, thinners, abrasives etc) conditions, data sheet and batch certificates in accordance with project.
• Inspects correct type of blasting equipment and tools to be used to meet the paint quality according to the paint specification.
• Inspects pre-cleaning or solvent cleaning of surface, metal surface imperfection/defects, surface profile of blast cleaned surface using right inspection tools.
• Assesses surface cleanliness soluble salt contamination on blast-cleaned surface and related test such as pull-off test & reports.
• Able to handle painting inspections in blasting and painting inspection of tank coatings, ship hull painting, and structural items
• Coordinates Request for inspection (RFI) to third party and client paint inspectors on hold point and witness point as per project inspection test plan (ITP).
• ·Able to send enquiries to Paint manufacturers for Painting Specification in accordance with project Requirements and Secure Quality document for painting; Inspection & Test plan, blasting and coating procedure.
• Ensures calibration certificates of painting instruments are valid & available for reference
• Supervises the workplace and workers safety.
• Ensures coating is practical and in accordance with the specified requirements by preparing or reviewing drawings, specification, job instruction and material selection notes etc.
• Reviews Inspection Test Plan (ITP) as per project specification and procedures
• Coordinates and perform Coating inspection of structural, piping and outfit works etc. of the assigned project as per approved ITP.
• To monitor all painting/coating related works and ensure all final products meet project specification requirement.
• Conducts surveillance inspection of surface preparation, paint mixing, WFT, DFT adhesion and curing of paints.
• Coordinates with yard QA/QC team for all quality documentation submission to SCM with the construction completion.
• Conducts onsite audit as per relevant specification and customer requirement.

Structural

• Takes charge of project and carry out all QA functions for the assigned project.
• Prepares list of daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Supervises job coordination, monitor conformity towards quality, environmental and safety management system policies and procedure.
• Monitors and ensure all piping works are carried out according to the latest revision piping drawing and complies with contract specification, class requirements and quality management system.
• Coordinates all the inspections and testing with customer representative and / or classification surveyor as per the Inspection and Test Plan (ITP).
• Materials verification done with the specified mill certificates and codes;
• PMI testing on incoming, welder material;
• Verifies material use on sites are approved project materials;
• Familiarizes with piping inspection process;
• Verifies NDT are done as per approved NDT plan & procedures.
• Monitors the progress of work and report the status of completion of the official inspections such as accepted, rejected, postponed or cancelled to the respective project manager.
• Ensures project documents including inspection, traceability records, certificates, radiography films, and NDT reports are submitted to relevant party to signing.
• Checks and endorse inspection record prior to issue to customers.
• Ensures subordinates comply with company’s procedure and work instructions.
• Reports any non-conformance (NC) and issue corrective action request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Coordinates with yard QA/QC team for all Quality documentation submission to SCM with the construction completion.
• Implements and compile the monthly key performance indicators (KPI) related to piping.
• Verifies piping MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.
• Performs others duties as signed by the superior(s) from time-to-time.

Requirements

• Degree or Diploma in Mechanical Engineering / Marine and Offshore or equivalent.
• Minimum 5 years of relevant work experiences in shipbuilding / oil and gas / offshore projects as QA/QC Structural Inspector.
• Working in FPSO/FSO/FPU Project will be added advantage.
• Shall be familiar with AWS D1.1, API 2X, ASME Section II, and ABS Class rules.
• Certified Welding Inspector (AWS CWI or CSWIP 3.1)
• NDT Level II in RT/UT/MPI/PT

Our Address and Working Hours:

Seatrium Limited

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Seatrium Limited

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 7:30am - 5:15pm

Fri: 7:30am - 4:15pm

Seatrium Limited

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Ltd and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Location: Ang Mo Kio

Industry: Engineering

Singaporean Only

• Conduct user research, interviews, and usability testing to understand user needs.Translate user requirements into user interfaces.Create wireframes, prototypes, and user flows to communicate design concepts.
  
• Develop and maintain a consistent visual design language and style guide.Design user interfaces that align with guidelines and project objectives.Collaborate with developers to ensure the implementation of designs meets design specifications.
  
• Define and design interactions and animations that enhance the user experience.Ensure seamless navigation throughout the digital product.
  
• Collaborate closely with product managers, developers, and other stakeholders to understand project requirements and constraints.
  Provide design guidance during the development process.
  
• Create interactive prototypes to demonstrate design concepts and user flows.Conduct testing and gather feedbacks and refine designs.
  
• Prepare design documentation for development teams.
  
• Provide guidance and mentorship to junior designers.

Qualities We Value

• Proven experience as a UI/UX Designer
• Proficiency in design and prototyping tools such as Figma, Sketch, or similar
• Strong understanding of user-centered design principles and usability best practices
• Excellent visual design skills with an eye for detail and aesthetics
• Solid understanding of front-end development technologies (HTML, CSS, etc.)

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Responsibilities:

• Arranges necessary facilities and instruments for jobs such as meters, test kits, temporary preparations, shore generators, and load banks
• Performs testing and commissioning activities and ensures that proper documentations are approved and signed
• Supervises and deploys manpower to execute the operational tasks
• Ensures that electrical equipment and switchboards meet the purchase specifications, and arranges for protection and maintenance of the electrical system
• Reviews commissioning work processes to enhance efficiency and productivity
• Liaises with owners, class surveyors and government bodies pertaining to project requirements
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department and vendors
• Plans and schedules the testing and commissioning requirements based on project basis, and organises all logistics requirements for major operations
• Performs any other assigned duties and responsibilities

Requirement

• Diploma in Electrical Engineering or related Engineering Disciplines
• Min. 4 years of related work experience working on FPSOs
• Possess working experience related to testing of LV/ MV Switchboards, power generators, DCS / ICSS interface for PMS system
• Capable of testing and calibration of Electrical switchboard and its components, troubleshooting and clear understanding of system specification and class requirements
• Familiar with the testing procedures and applicable rules and regulations of regulatory bodies
• Familiar with test memos and manuals

Our Addresses:

Seatrium - Admiralty Yard

Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Seatrium Limited - Tuas Yard

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Our Working Hours:

Mon - Thu: 8:00 am - 5:15 pm

Fri: 8:00 am - 4:30 pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distribute to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Resolves quality related issues arising from sub-contractor and in-house production
• Performs E&I related Equipment and material inspection during receiving meet the purchase specifications
• Ensures protection and preservation of Electrical & Instrument system
• Ensures updates on electrical completion and mechanical completion progress at the project database
• Liaises with owners, class surveyors and government bodies pertaining to project requirements
• Coordinates the testing/ commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issues improvement note, where necessary
• Performs any other assigned duties and responsibilities

Requirements:

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Electrical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Familiar with loop test, hi pot test, mechanical completion checks ITR

Our Address and Working Hours:

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Ltd and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• Lead a team of technicians to ensure the maintenance programs and rectification jobs are manage efficiently
• Responsible for the daily AC thermal comfort are within acceptable limit
• Plan and supervise all Preventive and Corrective Maintenance work activities, priorities and reallocate resource when required, on ACMV equipment system under the responsibilities of Facilities organization
• Lead and participate in equipment and system abnormalities root cause analysis, attend review meeting, and provide update, then execute corrective and preventive action for continual improvement, this includes installation and modification work on existing or new mechanical equipment and system
• Implement efficiency improvement on the operational process, innovating and implementing systems improvement on energy conservation
• Perform standby/duty to attend to system fault or after office hours, weekends and public holidays when required
• Minimise all facilities, building and services system downtime during operation.
• Ensure adherence to quality standards and health and safety regulations

Job Requirement:

• At least 3 years of hands-on experience in ACMV works or a related field.
• Thorough understanding of building regulations and health and safety protocols.
• Exceptional communication skills, with the ability to collaborate effectively with non-engineering team members.
• Strong problem-solving abilities and the capability to troubleshoot issues on-site

Job Description:

1. Lead a group of technicians to maintain all the facilities, building, and services systems (BMS, Electrical etc)
2. Perform Preventive maintenance and corrective maintenance program according to procedure for all electrical & BMS systems
3. Conduct troubleshooting and determine root cause for rectification works of all electrical & BMS systems
4. Liaising and check with contractors on all electrical & BMS preventive and corrective works
5. Comply with all Plant environment and safety guidelines
6. Ensure sufficient critical spares inventory for all electrical & BMS system
7. Ensure complete documentation of procedures and maintenance works
8. Standby duties as and when required for A&A or rectification works
9. Any other ad hoc works assign by HOD

Job Requirements:

1. At least 3 years of relevant experience in electrical engineering
2. Strong technical knowledge of electrical systems, project managament skills, problem-solving abilities and excellent communications skills

Only shortlisted candidates will be notified by the HR department.

Job Description:

• Ensure incoming equipment meet the purchase specifications
• Arrange for protection and maintenance of equipment and system
• Review the commissioning work processes to enhance efficiency and productivity
• Review the commissioning work processes to enhance efficiency and productivity
• Coordinate with all sections for testing / commissioning requirements with different stakeholders and arrange for facilities and instruments for the job

Job Requirement:

• Degree/ Diploma in Naval Architecture/ Civil/ Marine & Offshore/ Mechanical / Electrical / Chemical Engineering / Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position.

Working hours & locations:

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon to Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte Ltd and our group of companies, shall be used for the purposes of evaluation and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Location: Jurong East

Working hours - Mon – Fri, 8.30am – 5.30pm

Requirements

• Handling of equipment for military and security (eg Chemical Detector, Radiation detector, Biological Detection Systems for Military , Acoustic Hailing Equipment / System etc)
• IT software installation and configuration.
• Handling enquiries on products such as post-sales delivery of equipment
• Carry out maintenance,diagnostic analysis, trouble shooting and repair work for equipment.

Requirements

• Higher Nitec / Diploma in Electrical & Electronics Engineering with min 5 years relevant experience
• Experience in customer relations.
• Able to do Stand-by duty if required

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Workplace: Ang Mo Kio

Job Desciption:

• Execute full software development lifecycle
• Develop existing programs by analyzing and identifying areas for modification
• Integrate software components into a fully functional software system
• Develop software verification plans and quality assurance procedures
• Document, write operational documentation and maintain software functionality
• Deploy programs and evaluate feedback
• Comply with project plans
• Maintain and improve existing codebases and peer review code changes
• Provide a detailed level of technical assistance to the customers
• Support customers by responding within the designated SLA
• Investigate and troubleshoot issues, developing solutions for customers while understanding their needs
• Perform impact analysis and coordinate implementation
• Carry out routine maintenance work
• Troubleshoot, debug and upgrade existing systems
• Maintain systems by monitoring and correcting software defects

Requirements:

• Ability to document requirements and specifications
• Proficiency in troubleshooting software issues and debugging a large codebase
• Proficent in Java development

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Location: Ang Mo Kio

Industry: Engineering

• Prospect for potential new clients
• Meet and build relationships with potential customers
• Work with team to develop proposals
• Participate in pricing of the solution/service
• Participate and attend functions such as trade exhibitions and conferences
• Organize technology demonstration events to showcase to services and products to potential customers
• Work with technical staff and internal colleagues to meet customer needs
• Present to management on sales progress during bi-monthly sales review meeting

Requirements:

• Bachelor's degree in Engineering or Business
• Experience in sales or marketing
• Experience in Defence System will be of advantage

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Location: Jurong East

Working hours : Mon – Fri, 8.30am – 5.30pm

Job Responsibilities:

• Supervise, execute and coordinate project activities together with a group of Engineers and Technicians
• Monitor and control project on schedule, within budgeted cost and quality standards.
• Work closely with consultant/ project owner to ensure project is delivered according to requirements.
• Perform system programming and troubleshooting during project implementation.

Requirements:

• Diploma/Higher Nitec in Electrical and/or Electronics
• 1-2 years’ experience in site supervision and coordination with main contractors and subcontractors
• Must have hands-on experience in alarm, card access and CCTV system installation knowledge.

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Product area

Google Cloud accelerates every organization’s ability to digitally transform its business and industry. We deliver enterprise-grade solutions that leverage Google’s cutting-edge technology, and tools that help developers build more sustainably. Customers in more than 200 countries and territories turn to Google Cloud as their trusted partner to enable growth and solve their most critical business problems.

Job description

When leading companies choose Google Cloud, it's a huge win for spreading the power of cloud computing globally. Once educational institutions, government agencies, and other businesses sign on to use Google Cloud products, you come in to facilitate making their work more productive, mobile, and collaborative. You listen and deliver what is most helpful for the customer. You assist fellow sales Googlers by problem-solving key technical issues for our customers. You liaise with the product marketing management and engineering teams to stay on top of industry trends and devise enhancements to Google Cloud products.

Additional job description

The Asia Pacific (APAC) Solutions Prototyping Team partners with customers to bring their goals to life. We collaborate to understand tests and ideas, then design and build practical working prototypes using data, analytics, AI, and software engineering. Our goal is to demonstrate how these technologies can work together to achieve impactful business results.

In this role, you will lead the design and development of prototypes, demonstrating the transformative power of data, analytics, AI, and software engineering to solve business tests for customers. You will mentor team members and contribute to the direction of our prototyping efforts.

Qualifications

Job responsibilities

• Lead the design, development, and iterative refinement of data-centric and Artificial Intelligence (AI) powered prototypes on Google Cloud Platform (GCP), showcasing the potential of data and AI to address specific business needs.
• Collaborate with customers to understand their business tests, technical requirements, and objectives. Build relationships with customers and stakeholders.
• Mentor and guide junior team members, fostering a culture of innovation and learning.
• Contribute to the development of internal best practices and methodologies for data and AI-motivated solutions.
• Stay up-to-date with emerging trends and technologies in cloud computing, data science and AI/ML, and identify opportunities for their application in prototyping projects.

Minimum qualifications

• Bachelor's degree in Computer Science, a related technical field, or equivalent practical experience.
• 10 years of experience in cloud computing, with a focus on Artificial Intelligence/Machine Learning (AI/ML), data analytics, and data engineering.
• Experience with modern application development and Developer Operations (DevOps) practices, including Continuous Integration/Continuous Deployment (CI/CD), containerization (Docker, Kubernetes), and infrastructure-as-code.
• Experience in programming languages such as Python with developing and deploying Generative Artificial Intelligence (GenAI) models and applications.
• Experience with data analysis, data engineering, database technologies (SQL, NoSQL), and data warehousing solutions.
• Ability to analyze business problems and develop technical solutions.

Preferred qualifications

• 10 years of experience in cloud computing, with AI/ML, data analytics, and data engineering, in a customer-facing or consulting role.
• Experience in architecting and developing software or infrastructure for scalable, distributed systems, particularly those related to AI/ML workloads.
• Experience in understanding customer requirements and designing technical architectures to meet needs.
• Experience in building prototypes and proof-of-concepts to demonstrate solutions.
• Experience in managing stakeholder expectations and building consensus around technical projects.
• Knowledge of cloud services related to AI/ML, data analytics, and data engineering.

Responsibilities:
• Assist the Project Manager and liaise with client's representatives on site, sub-contractors and suppliers.
• Plan and supervise the structural works of building and infrastructure construction.
• Coordinate the daily construction activities at the work site to meet the project progress and quality goals.
• Supervises contractors and workers to complete the project within the given budget and time frame.
• Ensure that all structural work is carried out in accordance with the design plan and ensures relevant construction regulations (e.g. workplace safety and health) are adhered to.

Requirements:
• Minimum Degree in Civil/Structural Engineering recognised by the PEB Approved Qualifications / BOA Approved Qualifications
• At least 2 to 3 years relevant working experiences managing construction project on sites
• Proficient in Microsoft Office, AutoCAD and knowledge of BIM
• Good communicative skills, able to interact with people of all levels and teamwork
• Singaporean only need apply

Please submit your resume in MS Word format to [email protected]

Please remember to include your
1) Recent photo
2) Current salary & Expected salary
3) Notice period

UNITED PERSONNEL SERVICES
21 Bukit Batok Crescent
#11-74 WCEGA Tower
Singapore 658065
Tel: +65 6565 1939
www.united-personnel.com

EA Licence Number: 05C5278
Registration No.: R1103477

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates would be notified)

Scope of Works

• Reports to Project Manager.
• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programs.
• Liaise with Consultants on technical issues and coordinate the site activities with subcontractors.
• Lead a group of supervisors and ensure site progress is on schedule.
• Maintain quality standards and carry out site inspections.
• Ensure compliance with EHS requirements, regulations, and best practices throughout the project lifecycle.
• Provide technical guidance during project design and construction phases, resolving technical issues promptly and effectively.
• Support the management of manpower, materials, and equipment to optimize productivity and efficiency.

Requirements

• Recognized Degree in Civil / Structural Engineering or equivalent.
• Minimum of 2 years' experience in construction project management.
• Technical competence.
• Positive attitude and good team player.
• Demonstrates a sense of urgency.

Requirements

• 5+ Years of CyberArk Experience: Demonstrated expertise in the deployment, configuration, management, and support of CyberArk infrastructure components. Proven ability to provide regional support and integrate CyberArk solutions via APIs. CyberArk certifications are preferred to validate knowledge and skills.
• Scripting and Reporting: Proficient in writing PowerShell scripts and SQL statements to develop comprehensive management reports focused on the usage and operational management of privileged accounts. This includes automating reporting processes and ensuring accurate data presentation for stakeholders.
• Data Visualization: Experienced with Grafana for creating data visualizations and dashboards, enabling real-time insights into access management and security posture. Skilled at translating complex data sets into understandable visual formats for better decision-making.
• Privileged Access Management: Strong understanding of enterprise privileged access management principles, encompassing risk management, compliance, governance, and control. Ability to develop and enforce policies that mitigate risks associated with privileged access.
• Audit Experience: Extensive experience in responding to audit queries and preparing detailed reports related to access management. Skilled in analyzing audit findings and implementing corrective actions to address compliance gaps. Proven ability to collaborate with internal and external auditors to ensure all necessary documentation is accurate and readily available.
• Remediation Expertise: Extensive experience in remediating CyberArk failed objects to ensure that auto-managed objects comply with security policies and standards. This includes troubleshooting and resolving issues to maintain operational integrity and compliance.
• Technical Platform Knowledge: In-depth knowledge of key operating systems and databases, including Windows, Unix, MSSQL, and MariaDB. Previous experience in administering these platforms enhances ability to manage and secure privileged accounts effectively.
• Banking Environment Experience: Familiarity with working in a banking or financial services environment, understanding the unique regulatory and security requirements involved. This background supports effective implementation of access management solutions tailored to industry standards.

Educational Background: Bachelor’s degree in Computer Science, Information Systems, or Engineering (or a related field). Alternatively, a combination of relevant professional experience and CyberArk certifications is also acceptable, demonstrating a solid foundation in security practices.

Role

• Deploy, configure, and manage Microsoft 365 (O365), MS Teams, and Skype for Business solutions.

• Manage and troubleshoot Active Directory (AD), Azure AD, Group Policy, DNS, DHCP, IIS, and Certificate Authority systems.

• Implement and maintain advanced Azure AD Premium features, including Single Sign-On (SSO) and Multi-Factor Authentication (MFA).

• Deploy, manage, and maintain Windows Server operating systems, including 2022, 2019, 2016, and legacy OS versions.

• Work with hypervisor technologies such as VMware vSAN, Nutanix, and Microsoft Storage Spaces Direct.

• Manage enterprise backup, storage, and disaster recovery systems using solutions like Simplivity, Cisco HyperFlex, and other cutting-edge technologies.

• Implement and maintain enterprise-grade servers and infrastructure from vendors like IBM, Dell, Cisco UCS, HPE, Lenovo, Super Micro, and Fujitsu.

• Optimize infrastructure to ensure high availability, reliability, and scalability.

• Ensure efficient configuration and usage of Cisco Teams and other collaboration platforms.

• Enable seamless communication across teams using integrated IT tools.

• Design and manage cloud solutions in AWS, Azure, and hybrid cloud environments.

• Ensure seamless integration of cloud and on-premises services to meet business requirements.

Requirements:

• Bachelor’s degree in computer science, Information Technology, or a related field.

• 7+ years of experience in IT infrastructure, Microsoft solutions, and cloud technologies.

• Proficiency in managing hybrid cloud environments, with strong knowledge of AWS and Azure.

• Expertise in Active Directory, Azure AD Premium, SSO, MFA, and Group Policy management.

• Hands-on experience with hypervisor technologies (VMware, Nutanix, Microsoft Storage Spaces Direct).

• Strong understanding of enterprise backup and storage solutions like Simplivity and Cisco HyperFlex.

• Solid knowledge of enterprise hardware (IBM, Dell, Cisco UCS, HPE, Lenovo, etc.).

• Excellent problem-solving, communication, and project management skills.

• Relevant certifications (e.g., Azure Solutions Architect, VMware Certified Professional, AWS Solutions Architect) are highly desirable.

• Experience with IT automation and scripting (PowerShell, Python, or similar).

• Familiarity with monitoring tools and ITSM frameworks.

• Knowledge of legacy OS migration and modernization projects.

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

Assistant Application Engineer
$2,400 to $3,400
5 days
9am-6pm
Office location: Bukit Batok
Working location: Singapore Islandwide - Client site

Job description:

• Works with engineering, sales, and ops staff to understand standard component fabrication techniques, standard composite materials to use, and current demands of our customers to formulate design details for the sales staff and our customers.
• Responding to requests for technical queries with detailed analysis of the building management system, planning of project schedule and execution.
• Handle ACMV related equipment controls including control logic programming
• Check and ensure all installations conform to project specifications, and be able to manage system applications, drafting, database generation and commissioning of the systems
• Effective handling of project reviews and handling by conducting FAT(Factory Acceptance test), SAT(Site Acceptance Test).

Requirements

• Candidate to possess with a ITE, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Computer/Telecommunication), Engineering (Electrical/Electronic) or equivalent.
• On job training provided

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

This role is responsible for supporting validation activities including develop, support and implementation. In this role, the engineer must ensure qualification activities are performed in accordance with the company’s policies and procedures, and regulatory requirements.

Responsibilities:

• Support equipment, facilities, utilities qualifications
• Develop validation lifecycle document and protocols/reports in accordance with relevant policies, standards, procedures and guidelines, and complete execution in a timely fashion,
• Manage qualification execution and lead qualification deviation investigations encountered during qualification
• Collaborate with multi functions to arrange, plan and ensure smooth running of the qualification activities
• Participate in site Validation Maintenance Program
• Support Change Implementation on site
• Any other tasks as and when assigned by supervisor / Manager
• Support other technical changes and duties as required

About You:

• Engineering/Science Degree or higher from recognised institution
• At least 2 years of experience in Equipment Qualification in the pharmaceutical/biotech industry.
• Experience in Critical Utilities, process equipment and facilities qualification is preferred.
• Must have experience in controlled temperature chamber qualification with temperature mapping.
• Good knowledge and experience of the practical and theoretical requirement of validation program in GMP facility
• Good Knowledge of Upstream, Downstream and Support Services equipment within the Pharma Biotech Industry.
• Good oral and written communication skills.
• Meticulous and Systematic
• Team player, with strong focus on safety, quality and timeline
• GMP/cGMP knowledge a plus
• Self-motivated and capable of working in diverse team situations with company clients and maintaining a positive attitude towards project challenges.

Duration : 09 months. Option to extend/convert subject to performance review.

Based in Tuas.

Roles & Responsibilities:

Responsible for vendor sourcing for construction materials from international and domestic markets

To assist in reviewing and preparing contractual documents for material purchase

To review and analyse all vendors/suppliers, supply and pricing options to generate quote comparison sheets

Familiar with construction material and specification

To maintain and update supplier information such as track record, experience, product lines, etc.

To maintain records of all purchases, pricing and other important data as necessary

Requirements:

Degree/Diploma qualification

Has 5 years or more experience as a Procurement officer or an equivalent position

Possesses good knowledge and understanding of procurement processes, policies and systems

Proficient in Microsoft Office

Able to assess problems and come up with strategies for better solutions

Possesses good written and verbal communication skills

Able to prioritize, multitask and manage time effectively

Has a good eye for detail

Responsibilities:

• Responsible for setting up / establishing the Electronic Batch Records
• Responsible for manufacturing process technical support and improvement initiatives for ongoing operations
• Support start-up and assist in plant equipment and facility validation and qualification activities
• Supports manufacturing activities during the technology transfer, qualification and validation batches associated with new product introductions to the site
• Supports operational efficiency goals for yield, product quality and other product and/or site KPI’s
• Contact and consultant for process/equipment troubleshooting and investigation activities
• Supports risk assessment activities providing relevant technical knowledge
• Provides support for process cleaning/changeover strategies
• Authors technical reports, batch records, SOP’s, investigations, protocols as required and ensures consistency and quality of the group’s documentation

About You:

• Bachelor Degree in Chemical Engineering
• Possess more than 5 years of experience preferably in the area of API Manufacturing (Technical Engineer) or Manufacturing, Science and Technology (MSAT) role
• Responsible for manufacturing support of commercial API processes
• Provides rapid response to operational issues and supports ongoing operations including new product introduction, process engineer, process flow diagrams and process batch record authoring

Duration : 06 months. Option to extend/convert subject to performance review.

Based in Tuas.

Overview

As a WSH Coordinator, you will assist the Project Manager in the daily operation of executing the company’s safety regulations and practices in the workplaces.

Responsibilities

1) Assist WSH Officer on safety and health matters.

2) Execute appropriate safety measurements in accordance with the Workplace Safety & Health Act.

3) Liaise closely with Project Managers, main contractors, contracts and authority, etc. on all safety and health issues.

4) Assist in accident / incident reporting and investigations as well as hold toolbox meetings and all WSH matters execution.

5) Perform daily inspection to ensure compliance to prevailing MOM regulations and Company Construction work policies.

6) Coordinate and maintain records of safety orientation and daily toolbox meetings.

7) Ensure safe work practices are adhered to by all parties in the daily site activities.

8) Perform daily inspection to ensure compliance and inform Project Manager accordingly.

9) Attend to all feedback on safety irregularities and inform the WSH Officer accordingly.

10) Ensure all safety legislation and in-house safety rules and regulations.

11) Ensure all parties at work are following the safe work procedures compliance.

12) Assist Project Manager to liaise with relevant authority visiting / complain or feedback, if necessary.

Requirements

1) At least a Professional certificate / Nitec or equivalent.

2) Must possess at least an Advance Certificate in Workplace Safety and Health by BCA (Level B).

3) At least 1 years of working experience in construction industry.

4) A good team player with good communication skills and multi-tasking.

5) Able to write and speak in English and Mandarin as need to liaise with Chinese Client and workers.

6) Computer literate with MS Word, Excel, PowerPoint, etc.

7) Physically Fit, healthy, hardworking and can work on weekends.