Overview

As a WSH Coordinator, you will assist the Project Manager in the daily operation of executing the company’s safety regulations and practices in the workplaces.

Responsibilities

1) Assist WSH Officer on safety and health matters.

2) Execute appropriate safety measurements in accordance with the Workplace Safety & Health Act.

3) Liaise closely with Project Managers, main contractors, contracts and authority, etc. on all safety and health issues.

4) Assist in accident / incident reporting and investigations as well as hold toolbox meetings and all WSH matters execution.

5) Perform daily inspection to ensure compliance to prevailing MOM regulations and Company Construction work policies.

6) Coordinate and maintain records of safety orientation and daily toolbox meetings.

7) Ensure safe work practices are adhered to by all parties in the daily site activities.

8) Perform daily inspection to ensure compliance and inform Project Manager accordingly.

9) Attend to all feedback on safety irregularities and inform the WSH Officer accordingly.

10) Ensure all safety legislation and in-house safety rules and regulations.

11) Ensure all parties at work are following the safe work procedures compliance.

12) Assist Project Manager to liaise with relevant authority visiting / complain or feedback, if necessary.

Requirements

1) At least a Professional certificate / Nitec or equivalent.

2) Must possess at least an Advance Certificate in Workplace Safety and Health by BCA (Level B).

3) At least 1 years of working experience in construction industry.

4) A good team player with good communication skills and multi-tasking.

5) Able to write and speak in English and Mandarin as need to liaise with Chinese Client and workers.

6) Computer literate with MS Word, Excel, PowerPoint, etc.

7) Physically Fit, healthy, hardworking and can work on weekends.

Overview

As a WSH Supervisor, you will assist the WSH Coordinator in the daily operation of executing the company’s safety regulations and practices in the workplaces.

Responsibilities

1) Execute Permit-to-work system according to WSH construction regulations.

2) Assist in accident / incident reporting and investigations.

3) Coordinate and maintain records of safety orientation and daily toolbox meetings.

4) Ensure safe work practices are adhered to by all parties in the daily site activities.

5) Attend to all feedback on safety irregularities and inform the WSH Officer accordingly.

6) Ensure all safety legislation and in-house safety rules and regulations.

7) Ensure all parties at work are following the safe work procedures compliance.

Requirements

1) At least a GCE O Level / SPM.

2) Must possess at least a WSQ Supervise Construction Work for WSH.

3) At least 1 years of working experience in construction industry.

4) A good team player with good communication skills and multi-tasking.

5) Able to write and speak in English and Mandarin as need to liaise with Chinese Client and workers.

6) Basic computer literate with MS Word, Excel, PowerPoint, etc.

7) Physically Fit, healthy, hardworking and can work on weekends.

Company Description

Higogame is a trailblazer in the mobile gaming and entertainment industry. Since our inception in late 2020, we have been dedicated to transforming the gaming landscape in Southeast Asia and beyond, delivering innovative and immersive experiences that engage millions of players around the globe.

• Our revenue has seen remarkable growth year after year, with operations extending across multiple regions worldwide.
• In just three years, we've risen to become one of the top two games of our kind in the local market.
• We proudly serve around 2 million active users daily and have a total monthly active user base of 5 million worldwide.
• Our team consists of over 200 talented employees, including a robust R&D division of more than 100 experts.
• We offer exceptional career development opportunities and foster a multinational culture that empowers everyone to reach their full potential.

Join us as we continue to push the boundaries of mobile gaming!

Responsibilities:

• Responsible for the design, development, testing, and optimization of game server framework, business underlying modules, and logic modules.
• Responsible for the stability and efficiency optimization of the server framework.
• Responsible for timely resolution of various faults and problems that occur during game operation.

Requirements

• Associate degree or above in computer-related major, with 3 years of game development experience.
• Proficient in C++/Golang/C#, familiar with Linux/Unix development environment, familiar with shell, system programming;
• Familiar with TCP/IP protocol, network programming, database programming (MySQL, Redis, SQL Server), familiar with Kafka;
• Good programming specifications and programming ideas, strong problem analysis and problem-solving spirit;
• Sense of responsibility and teamwork.
• Min 3 years working experience.
• Good verbal communications skills in mandarin due to the need to speak to Chinese speaking stakeholders

JOB DESCRIPTION

- To assist welding engineering personnels in the production

- To perform welding/metalworking jobs and other related jobs
- Read and interprete engineering and fabrication drawings

- Assist in other production as and when required

Requirements:

-Must be willing to work overtime-5.5 day work week

-Singaporean and PR , foreigners are also welcome

-Must have least 2 years of working experience in Fabrication or engineering

-Experience in using electrical or manual tools (saws, squares, calipers etc.)

-Ability to read and interpret technical documents and drawings

- Forklift licence would be an advantage

Scope of Work:

• Deploy scanners/printers/desktops as part of project requirements

• Responsible for the installation of computer hardware and peripheral components such as monitors, keyboard, printers, scanners and other client devices on user's premises

• Investigate and research solutions for PC hardware and software problems

• Participate on Desk Side projects

• Adhere to attendance guidelines of the job and to departmental and company policies

• Any other tasks or works as and when requested & assigned by the Company

Key Qualifications/Requirements:

• Able to work in 24 X 7 shift rotation

• Experience in troubleshooting and managing Win10/11, MS Office, MS Outlook, MS Active Directory,

basic networking, POS, scanner, printer, and other attached peripherals.

• Ability to perform PC hardware and software trouble-shooting with experience in the use of diagnostic programs and tools

• Good customer service and communication skills

• Ability to manage projects and provide status updates on weekly/ monthly basis

Responsibilities:

• To perform engineer’s role on method statement, implement cost & time efficiency on operation
• To checking plans, drawings and quantities for accuracy of calculations
• To supervise site works compliances and inspection requirement
• To carry out daily site supervision, coordination and quality assurance of all trades implementation on site
• To work closely with sub-contractors on project progress and ensure timely work arrangements
• To scheduling materials and equipment purchases and deliveries
• To liaise with consultant and carry out site inspection
• Attend all site's meeting on work progression
• To prepare monthly meeting progression report

Requirements:

• Possess Degree in Civil Engineering
• 3 years working experience in Construction
• Able to work independently
• Have positive attitude

Job Summary:

The Mechanical Engineer will be responsible for maintaining and improving the performance of mechanical systems and equipment, ensuring they operate safely and efficiently. This role will also involve troubleshooting issues, updating maintenance procedures, and supporting daily operations.

Key Responsibilities:

• Perform regular maintenance to ensure equipment runs safely and efficiently.
• Improve preventive maintenance processes to reduce costs and enhance performance.
• Update maintenance documents, SOPs, and equipment records.
• Troubleshoot and resolve mechanical issues quickly.
• Work with the team to maintain equipment and safety standards.
• Train staff on maintenance procedures and assist in monitoring safety practices.
• Manage spare parts inventory and assist with project-related tasks.
• Ensure compliance with safety and environmental standards.

Qualifications:

• Nitec in Mechanical Engineering or related field.
• At least 2 years of experience in mechanical maintenance or a similar role.
• Strong problem-solving and communication skills.
• Knowledge of safety standards and maintenance procedures.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Equipment Engineer (Wet) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Copper Plating and Wet Etching process equipment working principle and how critical parameters will impact process and to work together with process counterpart to resolve complex integration issues.
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance of Copper Plating and Wet Etching equipment
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Self-audit and update specifications to meet company Quality Standard requirements
• Provide long term solution to address daily issues. Resolve department hardware chronicle issues.
• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory
• Other ad-hoc duties as assigned

Requirements

• Minimum bachelor’s degree in electrical / electronics / mechanical / mechatronics / microelectronics engineering
• Minimum 3 years of relevant experience in equipment engineering, preferably in a semiconductor/LCD/Electronics / Electrical industry
• Hands-on experience in maintenance or troubleshooting of wet etch equipment
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Proven ability to identify, assess and solve problems

Preferred Qualifications

• Prior experience in Advanced Packaging/LCD/foundry or similar industry background with SABRE/STRATUS/GPTC/SSEC experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

Equipment Engineer (Lithography) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Photolithography Stepper, Coat & Develop process equipment working principle and how critical parameters will impact Photoprocess and to work together with process counterpart to resolve complex integration issues.
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Setup tracking system to monitor expenditures
• Provide feedback, guidance and training to AEs
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Familiar and update specifications to meet company Quality Standard requirements
• Familiar with SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory
• Other ad-hoc duties as assigned

Requirements

• Minimum bachelor’s degree in electrical / electronics / mechanical / mechatronics / microelectronics Engineering
• Minimum 3 years of relevant experience in equipment engineering, preferably in a semiconductor/LCD/Electronics/Electrical industry
• Hands-on experience in maintenance or troubleshooting of lithography equipment
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Proven ability to identify, assess and solve problems

Preferred Qualifications

• Prior experience in Advanced Packaging/LCD/foundry or similar industry background with ASML/NIKON/RUDOLPH/TEL/SUSS/ experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

Singaporean & PR are encouraged to apply. Min. 2 years project experience in Singapore. Construction related diploma singapore recognised qualifications are required.

Scope of Work for Site Engineer

1. Planning and Coordination

• Assist in planning construction activities to meet project deadlines.
• Collaborate with project managers, architects, and other stakeholders to ensure seamless workflow.
• Prepare and maintain project schedules, ensuring alignment with overall project objectives.

2. Site Supervision

• Oversee daily on-site construction activities to ensure compliance with design specifications, quality standards, and safety protocols.
• Monitor progress and provide updates to project management teams.
• Manage labor and subcontractors to ensure productivity and adherence to schedules.

3. Quality Control

• Inspect materials and workmanship to ensure compliance with project specifications and industry standards.
• Conduct regular site inspections and issue corrective actions when necessary.
• Prepare and maintain quality control documentation.

4. Technical Responsibilities

• Interpret and implement construction drawings, plans, and specifications.
• Identify and resolve technical issues on-site.
• Supervise installation and commissioning of structural, mechanical, and electrical systems (if applicable).

5. Health, Safety, and Environmental (HSE) Compliance

• Enforce adherence to safety regulations and standards on-site.
• Conduct safety briefings and toolbox talks for on-site personnel.
• Address and mitigate potential environmental and safety risks.

6. Documentation and Reporting

• Maintain detailed records of work progress, issues, and changes.
• Prepare daily, weekly, and monthly reports for stakeholders.
• Ensure documentation is properly archived for future reference.

7. Material Management

• Coordinate the procurement and delivery of construction materials.
• Monitor inventory and ensure the availability of required materials on time.
• Verify the quality and quantity of materials delivered to the site.

8. Communication

• Serve as the primary point of contact between the site team and project management.
• Liaise with clients, consultants, and contractors to resolve any site-related issues.
• Provide regular updates to stakeholders regarding project progress and challenges.

9. Budget and Cost Control

• Assist in monitoring project costs and budgets.
• Identify potential cost-saving opportunities without compromising quality.
• Report any cost deviations or overruns to the project management team.

10. Problem-Solving

• Address and resolve unexpected issues or challenges arising during construction.
• Propose innovative solutions to enhance efficiency and project outcomes.

11. Handover and Close-Out

• Supervise final inspections and ensure completion of snag lists.
• Ensure all as-built drawings, manuals, and other documents are provided to the client.
• Assist in project handover and obtain client acceptance.

Maintenance Engineer |

Location: Tuas
Working Days: 5 days (Mon-Fri)
Working hours : 7:30am to 5:15pm
Salary Range: $3k - 4k

Job Responsibilities

• Monitor the machines and company equipments operational performance and condition
• Conduct preventive maintenance to machine and company equipments as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipments
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Accountable

• Meeting department quality objectives
• Ensure maximized machine uptime
• Ensure planned preventive maintenance is carried out effectively to minimize machine down time
• Ensure sustainable continuous improvement initiatives are carried out on machine, equipment and facilities

Job Requirements

Skill Requirements

• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Education, Experience & Training

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years experiences in machine repair and maintenance

Training Requirements

• Quality Management and its related Quality Procedures

The Supreme HR Advisory Pte Ltd | 14C7279
Ong Boon Kiet (Travys) | R22104769
Senior Recruitment Consultant

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Assistant Engineer / Mechatronics Assistant Engineer
• Working Location: Woodlands
• Working Hours: 5 days’ work (Mon – Fri: 8am to 6pm)
• Salary Package: Up to $3000 + AWS
• Duration: Permanent Role

Key Responsibilities

• Perform electrical wiring including installation, servicing and troubleshooting of machine equipment
• Identify and document issues in assembly and testing phases
• Conduct on-site machine commissioning and client training
• Complete in-house automation machine assembly and wiring
• Analyze and solve machinery issues during testing and commissioning

APPLY NOW!!!

• ITE/Diploma in Engineering or related field
• Individuals without experience but with a keen interest in engineering are encouraged to apply

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66189 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Job Description

• Industry/ Organization Type: Manufacturing (O&G)
• Position Title: Mechanical Engineer
• Working Location: Jurong East
• Working Hours: 5 days (Monday to Friday (9 AM - 6 PM)
• Salary Package: Basic Salary up to $7,500 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Focus on equipment design, hands-on assembly, testing, troubleshooting, and supporting projects related to jacket flooding systems and valves
• Assess the client's needs to understand design requirements.
• Use CAD software to create design drafts (such as P&ID and GA drawings).
• List necessary materials, compare with current stock, and manage inventory reports for project implementation.
• Keep track of the project's progress to ensure it aligns with the planned timeline.
• Test, diagnose issues with, and fix equipment or products manually.
• Manage the submission of documents to clients.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or a relevant advanced qualification.
• Minimum 1-2 years of mechanical engineering experience in the O&G industry.
• Skilled in using AutoCAD for drafting and competent with Microsoft Office.
• Hands-on technical skills are an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66240 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Oversee in-house engineering design works of Fire Protection (Sprinkler, Hose Reel, Fire Hydrant, Dry Riser, etc) and Plumbing and Sanitary system, including detailed design, hydraulic calculation, shop drawings, pipe sizing, equipment selection, etc.
• Manage Fire Protection & Plumbing design coordination with other trades with BIM coordination.
• Liaise with Fire Protection & Plumbing suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for Fire Protection & Plumbing system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based FP & Plumbing experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in FP & Plumbing calculations including pump sizing, hydraulic calculation, tank sizing and more.
• Experience of design and coordination skill.
• Familiar to fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Job Description & Requirements:

As a Frontend Engineer, you will be responsible for architecting and developing efficient, reusable, and visually appealing frontend systems for a trading application powered by AI models and LLMs. You'll work closely with cross-functional teams, including backend engineers, AI engineers, product managers, UI/UX designers, and the product design team to deliver a responsive, engaging user experience across web and mobile platforms. Your expertise will ensure a seamless blend of aesthetic and functionality.

Key Responsibilities:

• Architect, design, and develop efficient and reusable frontend systems (Web/Mobile)
• Collaborate with backend engineers, AI engineers, UI/UX designers, product managers, and other stakeholders to build comprehensive, architecturally sound, and visually appealing frontend solutions
• Optimize code to improve scalability, reliability, security, and performance of web and mobile applications
• Design interactive components, especially for chat-based and generative UI, to create dynamic LLM-powered user experiences
• Write comprehensive tests for all developed features to maintain software quality and reliability
• Documentation of design and architecture.

Qualification & Skills:

• Minimum 6 years of professional experience as a Frontend Engineer
• Expert in HTML5 / CSS3 / ECMAScript 6 + / TypeScript. Strong preference for candidates experienced with Tailwind CSS
• Proficient in modern frontend frameworks, including React and Vue, and/or React Native for mobile
• Skilled in state management tools such as Redux, Pinia
• Experience with API design principles, RESTful API integration and familiar with React Query
• Strong understanding of client-side performance, optimization.
• Deep knowledge of scalability, reliability, and security considerations in modern web development.
• Familiarity with LLM application development and generative UI/interactive components, particularly for chat-based applications
• Excellent collaboration and communication skills to work effectively across teams

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Software & Solutions department which includes the Embedded Software team.

Staff Embedded Software Engineer

Responsibilities:

• Drive the development and testing of the SDK on SoC devices and emulation platforms.

• Work within MCU software development team, Architecture team and SOC Design team on MCU software development and test activities.

• Responsible for extending the hardware adaptation layer (HAL) and device drivers of the SDK to new platforms as well as enhancing its features and content. The candidate will be involved in the extension of the SDK to cover new MCU members of the family as they become available.

• Work with our software architects to define the hardware abstraction layer (HAL) and board support package (BSP) of the SDK.

• Design, develop and maintain HAL interfaces for MCU common blocks, such as Cache, MPU, TCM, MRAM/Flash, clock, power and MCU control etc.

• Design, develop and maintain examples and software testcases for MCU common blocks.

• Take a key role in the pre-silicon verification on FPGA, as well as post-silicon bring up, verification, and debug focusing on MCU core and common blocks.

• Design, develop and maintain real-time OS ports for MCUs.

Requirements

You should have either a Masters or Bachelor’s in Computer Science, Computer Engineering or Electrical & Electronics Engineering with at least 6 years of experience in embedded software development.

• Deep understanding of ARM architectures, Cortex M-profile preferred;

• Deep understanding of embedded RTOS required, Zephyr and FreeRTOS preferred;

• Experience with developing embedded MCU code in C and assembly language on Arm Cortex-M Processors;

• Experience with at least one MCU IDE from ARM, Keil, IAR, Eclipse, O-zone or other;

• Familiarity with MCU peripherals such as SPI, I2C, UART etc.;

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

• Position Title: Sales Engineer
• Location: Woodlands Horizon
• Working Days: Mon - Fri, 5 days
• Working Hours: 9am – 6.00pm
• Salary: $2,400 + Comms

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Responsibilities & Duties :

• Service knowledge including pricing, cost and profitability, market acceptance, channel, and competitive dynamics.
• Offer technical support and expertise advice to customers
• Increase sales primarily through direct contact or/and new/existing channel partners.
• Regularly monitors and reports on Key Performance Indicators (KPIs).
• Other duties may be assigned.

Professional Qualifications

• Diploma mechanical/Chemical Engineering with field experience is preferred.
• 1 to 3years relevant experience in handling sales
• Proficient with Microsoft Office & One Drive.

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development services providing customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and products through intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutions comprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com

RESPONSIBILITIES

We are seeking a motivated and detail-oriented Assistant Mechanical Test Engineer to join our team. In this role, you will assist in conducting and analyzing Environmental and mechanical tests to ensure the performance, durability, and safety of the products. The ideal candidate has a strong foundation in mechanical engineering principles, hands-on experience with testing procedures, and a passion for continuous improvement.

Key Responsibilities:

• Assist in setting up test rigs, fixtures, and instrumentation for mechanical & Environmental testing.
• Perform tests in accordance with established protocols and standards.
• Monitor and document test conditions and results accurately.
• Collect and record test data using appropriate tools and software.
• Analyze test results to identify trends, anomalies, and areas for improvement.
• Prepare detailed test reports and documentation.
• Work closely with design, quality, and production teams to ensure test requirements are met.
• Provide feedback to engineering teams based on test findings.
• Support troubleshooting and problem-solving efforts related to test failures.
• Maintain and calibrate testing equipment to ensure accuracy and reliability.
• Report and address any equipment malfunctions or maintenance needs promptly.
• Ensure all testing activities comply with company standards, industry regulations, and safety guidelines.
• Contribute to the continuous improvement of testing processes and procedures.

• Diploma in Mechanical Engineering or a related field.
• Minimum 1 year of experience in mechanical testing or a similar role (internships experience will be considered).
• Strong analytical and problem-solving skills.
• Ability to work both independently and collaboratively in a team environment.
• Detail-oriented with a commitment to delivering high-quality work.

• Perform design for manufacturability in all new projects.
• Provide PCB manufacturing technical advice to customers on their new projects.
• Perform feasibility studies and reviews for all new data received from customers.
• Adhoc duties as assigned.

Requirements:

• Degree/Diploma in Electrical & Electronics Engineering in Printed Wiring Board manufacturing environment
• Good communication, report writing and presentation skills
• Good analytical skill with ability to work independently
• Ability to communicate with all levels of staffs
• Entry level are welcome to apply as training will be provided.

Electronics MFG Industry

Loyang Area (Tpt pick up at designated area)

Interested applicants, please forward a detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Software & Solutions department which includes the Embedded Software team.

Staff Embedded Software Engineer, Camera & ISP Drivers

Responsibilities:

• You will be responsible to drive the development and testing of the SDK on Ambiq SoC devices and emulation platforms, focusing on HAL and drivers for our next generation of MCU camera interfaces, image signal processors and corresponding camera devices.

• Define the hardware abstraction layer (HAL) and board support package (BSP) of the SDK.

• Design, develop and maintain HAL interfaces for MCU common blocks, such as Cache, MPU, TCM, MRAM/Flash, clock, power and MCU control etc.

• Design, develop and maintain examples and software testcases for MCU common blocks.

• Take a key role in the pre-silicon verification on FPGA, as well as post-silicon bring up, verification, and debug focusing on MCU core and common blocks.

• Design, develop and maintain real-time OS ports for Ambiq MCUs.

Requirements

You should have either a Masters or Bachelor’s in Computer Science, Computer Engineering or Electrical & Electronics Engineering with at least 6 years of experience in embedded software development.

• Deep understanding of ARM architectures, M-profile preferred

• Deep understanding of embedded RTOS required, Zephyr and FreeRTOS preferred

• Deep understanding of low-resolution camera interfaces and MIPI CSI in embedded systems, with experience in developing HAL and device drivers for I2C, SPI, MIPI, DMA controllers, and image sensors.

• Familiarity with Image Signal Processors (ISP) and each stage of a camera ISP pipeline, with experience in developing HAL for ISP is highly preferred. Good hands-on experience on lab equipment such as oscilloscopes, logic analyzers etc. for debugging issues.

• Experience with developing embedded MCU code in C and assembly language on Arm Cortex-M Processors;

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

JOB DESCRIPTION

· Wireless AP software development and firmware development

· Network communication protocol development

· Embedded system development

· Execution of pre-test for IoT/ Wi-Fi router related certification

JOB REQUIREMENTS

· Bachelor’s Degree or above in Computer Science, Computer Engineering, Electronic, Telecommunication or Networking Engineering

· Familiar with C/C++ and Linux system

· Familiar with networking and embedded system development

· WiFi development experience is an advantage

· Good communication and team working skills

· Good problem solver, ability to think out of the box

· Passion in programming is an advantage

Job Description:

- Perform maintenance, repair, overhaul and servicing (Mechanical)

- Perform lubricant replacement, greasing and flushing for system (Hydraulic)

- Perform wiring replacing, re-routing of harnesses, cabling repair and system testing (Electrical)

- Machinery usage involved overhead crane, buffering machine, hydraulic press, drilling machine & STE etc.

- Working at height (climbing up and down of vehicles)

- Maintain 5S/ housekeeping (Include, sweeping, clearing, and throwing rubbish, washing of parts & vehicles)

Job Requirements:

- NITEC/Higher NITEC in Electrical/ Electronics/ Mechatronics/ Mechanical Engineering preferred

- Competent in use of hand tooling

- Good interpersonal skills, proactive and work well with others

- Preferably with valid Class 3 driving license

• To analyse user requirements and design, develop, implement and maintain computer applications to support and assist users to meet their business objectives more effectively and efficiently.
• Develop, support and enhance the Data Download Centre (including Engineering Portal) and iSCM websites.
• Develop, support and enhance Excel productivity enhancement tools (VBA macros).
• Support end-users in usage of Plasma and ACCPAC and help to resolve any operational issues, including working together with vendor (Databit) if necessary.
• Develop and enhance data extraction and transformation mechanisms on source systems (e.g. Plasma, YEOS, NYQT, Oracle BI, SAP RFC, PTS etc.) and store the results into Plasma Info Server Monitor the space consumption of Plasma Info so that Server database so that potential problems (e.g. disproportionate consumption of disk space by a particular table, depletion of data tablespace, excessive consumption of temp tablespace) are detected and resolved early to avoid unscheduled database downtime.
• Perform ad-hoc retrieval of order/production/sales data to support incident investigation, reporting or other requests.
• Support Migration Activities of Existing Plasma Info Server to SAP.
• Support & ensure successful implementation of Company-wide Automation (ERP) Projects.

Requirements:

• Degree in Info Systems/Computer Science or its equivalent
• Prefer 2-3 years relevant experience in Manufacturing Industry.
• Entry level are welcome to appy as training will be provided.

Knowledge:

SQL; Oracle PL/SQL; MS SQL Server Transact-SQL

Object-oriented analysis and design

ASP.NET 4.5.1; C/C++/C#; XML

JavaScript; JQuery; CSS; HTML

Excel VBA; VBScript; PowerShell

PHP, VS.Net, MSOffice

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

Job Requirements:

1) Loading and unloading of material from the truck.

2) Valid Class 5 Singapore driving license

3) Perform daily routine checks and maintain the general cleanliness.

4) Every day need hand over job scope

5) Conduct daily checks to ensure that the vehicle is in a good and safe condition.

6) At least 5-year experience in driving a heavy vehicle (i.e Tipper truck or Cement mixer truck) will be preferred

7) Driving in a safe manner at all times and adhering to traffic rules & regulations stated in the Road Traffic.

8) Basic knowledge of English is essential