Project Supervisor will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. To perform any other duties & Responsibilities assigned by superiors from time to time.

5. Ability to demonstrate and implement cost -saving measures.

6. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

1.Manage store Inventory & handle sales cash.

2.Receive ,distribute and maintain adequate quantities of stock at all times.

3.Maintain optimal stock levels.

4.Maintain stock and consumption records.

5.Check incoming materials for quality against invoices,purchase orders and packing slips or other documents.

6.Make clear notes on the receipt of the items against eash invoice.

7.Keeps and updates records of good received and issued.

8.Complies report of expenditure,and monthly stock report.

9.Perform related duties and responsibilities as assigned.

Job Description

• Aggressively build, maintain and grow accounts & relationships with key clients to achieve sales earnings and management established targets & objectives
• Grow products sales revenue and earnings per client
• Create, identify and solicit aggressively new project potentials by proactively sourcing for sales opportunities
• Identify, Qualify, Present, Negotiate and Close complex deals
• Build and maintain strong relationships with major clients and trading partners
• Tender preparation / assessment of commercial viability to bid, review technical requirements, customer specification review, best vendor assessments, deriving costing estimates, product / vendor sourcing, commercial negotiations
• Maintain high level of customer satisfaction by following up closely with inter-departments, customers & vendors during pre-sales, order, or post -sales processes to deliver end results effectively
• Sales forecasting, project coordination, after sales support, sales presentations
• Participate in trade shows, exhibitions and conferences
• Prompt submission of reports
• Provide product on networking and data-communication products/solutions within an industrial application environment, namely:
• Developing solutions, design & consultancy
• Providing pre-sales advice and consultancy on systems
• Interface with principals on technical aspects of products and solutions
• Manage, develop, build and maintain strong relationship with principals and partners on focal products/solutions under its charge
• Keep abreast of new developments and innovations and/or improved related product applications in areas of responsibility
• Additional role may be assigned by management from time to time.

Requirements:

• Diploma or Higher in electrical & electronics engineering or equivalent
• At least 1 year of relevant experience in BD or sales role
• Experience in IT industry or related industries an advantage
• Knowledge of industrial & commercial telecommunication systems and its applications
• Experience in the promotion of industrial and/or telecommunication systems, with proven track records in securing projects related to Telecommunication Solutions (such as network, ex-proof and electrical products)
• Technical experience with industrial and/or telecommunication systems and good understanding of equipment specification is an advantage.
• Excellent communication, negotiation and presentation skills
• Superior networking and organizational abilities
• Result driven with strong critical thinking and problem solving skill
• Dynamic personality and a team player

As a Senior Account Manager, you aspire to drive business expansion, explore and target business growth opportunities.

• You are responsible to identifying customers’ needs and satisfy their requests, respond to their queries in a timely manner and aspire to deliver a positive customer experience.
• Grow our business by building successful, long-term client relationships and contribution to overall sales team and business success.
• Coordinate with inter-departments/vendors/manufacturers to achieve business goals.
• Maintain and update sales reports/forecasts.
• Start off by participating in the generation of proposals/quotations to understand the sales process.
• Handle ad hoc assignments given by superior.

Qualifications/Educational Requirements:

• Diploma in Engineering/ Electronics/ Telecommunication or related fields
• Dynamic, positive and outgoing personality
• Candidates with cybersecurity/ telecommunication / electronics background are welcome
• Attractive remuneration base on experience

Project Supervisor will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. To perform any other duties & Responsibilities assigned by superiors from time to time.

5. Ability to demonstrate and implement cost -saving measures.

6. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

• Required load and upload material,etc
• Maintain Material movement record
• To comply with LTA road safety and traffic regulation and site safety.
• To conduct daily check to ensure vehicle is in good and safe condition/upkeeping of vehicle.
• Valid class 4 driving license and lorry crane operator.
• Preferably able to start work within short notice.

We are looking for self-motivated instrument lead engineer targeting mainly at the Petrochemical, Bio, Pharmaceuticals, and the Oil and Gas industries. You will be exposed to different industries and be able to pick up plenty of experience and learnt not just on instrumentation but also application and plant operation process. The main scope of work is to lead our engineering team on the instrument service team and small-scale instrument installation project team which involves instrument maintenance, calibration, configuration, application, loop check, commissioning, install instrument, control cable laying, system panel cross wiring, update drawings, product after sales support. You are required on go on site for site survey, projecting bidding, supervise and coordinate site work and work together with our contractors.

Minimum 5 years of related experience is required with self-motivation and independant. Academic in instrumentation and control, electrical, electronic or mechatronic is preferred. Minimum ITE or Diploma related. Class 3 driving experience will be an advantage.

Successful applicants will join us as an extended family with work life balance and enjoy work flexibility and we believed in sharing with our employees.

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings, and other documents prepared for the different stages of a project.
• Supervise the installation, testing, and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Correspond with project experience acquired and individual competency in technical knowledge/skills, project management, and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognized by the Professional Engineers Board, Singapore
• Registered with the Professional Engineers Board, Singapore.
• Minimum 3 years of relevant experience in Mechanical engineering design for building services and infrastructure works. Those with more than 5 years of relevant experience may considered for a Senior role.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational, and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous

Work Location: 8 Tuas Avenue 18, Level 5, Singapore 638892 (Company bus at 0800hrs Tuas Crescent MRT Exit B bus stop)

Working Hours: Monday to Friday: 08:30 AM - 05:30 PM

Probation period fully on site
thereafter, on site Mon, Tue and Fri

Flexi Dollars: $700 per year (medical, dental, optical claims)

• Match purchase orders to invoices and perform invoice entry into ERP.
• Process payments through receiving, processing, verifying and reconciling invoices.
• Identify and flag out any irregularities detected during invoice processing.
• Record expenses to accounts and cost centers based on the invoice nature.
• Perform weekly payment runs to suppliers and employees.
• Perform supplier reconciliation on monthly basis.
• Filing documents.
• Perform bank reconciliation for payment.
• Prepare audit sheet schedules.
• Attend to supplier’s inquiries.
• Any other tasks/projects assigned by immediate supervisor.

Requirements

• Diploma in Finance/Accounting
• Must have at least 1 year of accounts payable/general accounting experience.
• Knowledge of accounts payable and general accounting principles.
• Proficient in relevant ERP systems - AX Dynamics system and MS Office.
• Knowledge of regulatory standards and compliance requirements.
• Attention to detail, good communication, time management, and organizational skills.
• Team player and able to work independently with minimal supervision.
• Preferably staying in the west

Job Responsibilities

• Responsible for all front-face process-related issues occurring during out-of-hours shift operation
• Monitor and sustain process performance on qualified processes and operations, monitoring SPC
• To troubleshoot out-of-control or process abnormality issues, lot disposition, and put the corrective actions in place
• Work closely with the process owner, equipment engineering, and operations teams to restore down process back to production and achieve modules objectives
• Deploy and review effective statistical control of processes to ensure a stable and robust processing platform. Respond to PR rules and follow CAS/SOP accordingly
• Provide details and accurate pass down of tools/process related and lot disposition during hand-over between shift process engineers or technicians
• Participate and assist in engineering improvement activities to assure continuous process yield and cost-saving projects
• Assign, and coordinate with the shift IC and other members on the daily shift to shift operation items
• Mentor and coach the junior new members
• To execute data analysis and situation awareness for excursion of process abnormality issues

Job Requirements

• Min Diploma in engineering/science or equivalent from a recognized institution
• 2 years of experience in the semiconductor industry with technical expertise and knowledge in dry/wet etch, thin film sputtering, backgrinding, and plating is advantageous
• Experienced in SPC and OCAP is advantageous
• Positive attitude with good communication and interpersonal skill
• Good analytical and problem-solving skills
• Willing to work in a clean room environment and on rotating shift

• Posting of recruitment advertisements
• Engagement with both internal and external stakeholders such as employees and vendors, etc
• Manage office sundry purchases
• Payroll administration
• Assists in employment contract renewals
• Coordinate medical arrangement for foreign employees (medical check-ups for work pass, and vaccination)
• Ensure complete, up-to-date, accurate and accessible records are kept for all employees.
• Assists in the co-ordination of social and recreational activities to promote the general welfare of all employees
• Performs HR data entry relating to employee's information, training records, etc.
• Manage and route phone calls appropriately
• Assists in work pass applications and other immigration related work.
• Prepare and submit government bodies and statutory board related surveys.

• Posting of recruitment advertisements
• Engagement with both internal and external stakeholders such as employees and vendors, etc
• Manage office sundry purchases
• Payroll administration
• Assists in employment contract renewals
• Coordinate medical arrangement for foreign employees (medical check-ups for work pass, and vaccination)
• Ensure complete, up-to-date, accurate and accessible records are kept for all employees.
• Assists in the co-ordination of social and recreational activities to promote the general welfare of all employees
• Performs HR data entry relating to employee's information, training records, etc.
• Manage and route phone calls appropriately
• Assists in work pass applications and other immigration related work.
• Prepare and submit government bodies and statutory board related surveys.

A Semicondutor and Automation company.

• Position: Senior Software Engineer (Equipment PC Programming)
• Working day: 5 days
• Location: AMK

Responsibilities:

• Design, develop, and maintain software for equipment PC-based programming.
• Implement, test, debug, and document software systems.
• Perform SECS/GEM software integration and prepare the necessary documentation.
• Evaluate existing software to identify potential enhancements and improvements.
• Provide troubleshooting support at customer sites as needed.

Requirements:

• A degree in a relevant field, with preferably over 5 years of experience in software development within the automation sector.
• Proficiency in equipment PC-based programming.
• Hands-on experience with motion control and process control systems.
• Familiarity with Vision System software development is a plus.
• Knowledge and practical application of SECS/GEM standards are essential.
• Strong analytical and troubleshooting abilities.

Aurora Asia Pacific (21C0671)|Ying Kee (R21103783)

[Order Number: 782382-R]

Responsibilities

• Manage the delivery, installation, and setup of bag-making machines at client sites, ensuring proper functionality and adherence to company standards.
• Conduct client training sessions on equipment operation, maintenance, and troubleshooting.
• Provide ongoing support by addressing inquiries, offering effective solutions, and performing routine maintenance to ensure long-term machine performance.
• Collaborate with the technical team in Japan to resolve complex technical issues and relay customer feedback for product improvement.

Requirements

• Non-experienced candidates are welcome to apply.
• Willingness to travel internationally as part of the job.
• Hands-on experience with industrial machinery is a plus.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Tan Sin Rou
EA Personnel Registration Number: R22106434
EA License no.: 07C5771

Responsibilities:

• Execute and complete scheduled operations and maintenance (O&M) tasks, along with ad-hoc maintenance activities, within set timelines and with the highest quality standards.
• Conduct routine inspections and checks of each equipment and process unit, accurately filling out and submitting checklists to the supervisor without delay.
• Perform scheduled preventive and predictive maintenance tasks, submitting maintenance records and checklists promptly to the supervisor.
• Address equipment breakdowns with corrective maintenance, ensuring all checklists and records are submitted to the supervisor.
• Report any equipment abnormalities or failures to the supervisor and assist in implementing rectification plans.
• Support operations activities as needed.
• Perform initial troubleshooting for equipment issues and report findings to the supervisor; assist in more advanced troubleshooting when required.
• Supervise maintenance contractors to ensure work is completed to standard.
• Promptly alert the supervisor to any unusual occurrences or potential damages.
• Maintain a safe and clean working environment by adhering to Environmental Health and Safety (EHS) procedures, rules, and regulations.
• Manage equipment, parts, and supplies inventories by monitoring stock levels and anticipating the need for spare parts.
• Undertake other tasks as assigned by the supervisor.

Requirements

• Diploma in engineering or Higher Nitec (mechanical, electrical, or industrial)
• Minimum of 3 years’ experience in facilities engineering or similar
• Strong communication skills with a positive mindset, hardworking, and capable of multi-tasking effectively.
• Customer Service oriented mindset
• Knowledge of fire alarm systems.
• Understanding of building regulations and health and safety.
• Excellent communication skills, including the ability to work well with non-engineering colleagues.
• Problem-solving skills and the ability to troubleshoot on the spot.

Job Description:

The person will be working with site personnel, site activities and be highly involved in the following aspects of the business but not limited to the below:

· Project management, site meeting and coordination.

· Technical study, identify variation works and submit accurate cost implication.

· Able to schedule, supervise and control sub-contractors to carry out their works accurately and timely in accordance to the contract drawings and specifications.

· Experience in managing a technical project, documentation and have an established network of vendors, suppliers & contractors will be an advantage.

· Undertake ad-hoc duties as assigned.

Job Requirements:

· NITEC / Diploma in Electrical Engineering

· Minimum 1 to 3 years of working experience in the related field is required for this position.

· Possess relevant safety certificates (BCSS) will be an advantage

· Willing to travel base on project site.

· Ability to communicate in English to liaise with suppliers

· Ability to work independently and meet tight project schedules

· Highly communicative and self-motivated individual personality

Interested candidates who wish to apply for the advertised position, please submit your application.

Please state your

· Last drawn & Expected salary

· Notice Period / Availability

(We regret to inform that only shortlisted candidates would be notified)

1. To perform troubleshooting of Live plant MCC, other electrical panels, lighting systems, and various process instruments

related to Jurong Island - Chemical plant.

2. To support and oversee vendor-installed new MCCs/LV boards as per the design and ensure safe commissioning

assistance as per protocol.

3. To do regular Preventive maintenance for of above.

4. Sound knowledge of area classifications related to the process industry and ensuring equipment inspection, and

verifications are in order

5. To do works, servicing of valves and actuators

6. To upkeep the spare part list and consumable list

7. To key in manhour in the CMM system

8. To upkeep the maintenance records and perform maintenance activity assigned by the supervisor 9. To perform electrical

LOTO for site activities.

10..To perform minor cable laying, termination, and glanding of E&I equipment.

11. Assist mechanical technicians with any emergency troubleshooting related to E&I works.

12. To provide support for E&I fitter for tray works and tubing, and related installation works(small panels, lights JB, etc)

13. Previous experience in turn-key / green field / gray field E & I construction experience is mandatory

Daily Attendance Tracking:

- Ensure accurate attendance records are maintained for all personnel.

- Submit daily attendance reports to the client in a timely manner.

Administrative Support:

- Provide general administrative assistance to the team.

- Manage and maintain accurate records and files.

- Assist with data entry, reporting, and other tasks as required.

Client Liaison:

- Develop and maintain a positive working relationship with our client.

- Respond to client inquiries and provide timely resolutions.

- Communicate effectively with the client regarding attendance, scheduling, and other matters.

General Administration:

- Assist with scheduling, coordination, and organization of meetings, events, and appointments.

- Maintain a tidy and organized workspace.

- Perform other administrative tasks as required.

Requirements:

Education:

- High school diploma or equivalent required.

- Post-secondary education in Business Administration or a related field is an asset.

Experience:

- 1-2 years of administrative experience, preferably in a similar role.

- Experience working with clients and providing excellent customer service.

Skills:

- Proficient in Microsoft Office (Word, Excel, Outlook).

- Excellent communication, organizational, and time management skills.

- Ability to work independently and as part of a team.

Software Engineer

• Work Location: Yishun Industrial Park A [ Canberra MRT] / Have company transport
• Working Days: 5 Days // 8am/8.30am - 5.30pm/6pm
• Salary $4500 to $6500 (depends on experience)

Role:
As a Software Engineer, you will be required to maintain and manage applications of current and developing technology, and undertake engineering design, development, and operation of SPI solutions, factory line solutions, and their associated modules and configurable options with a strong focus on quality.

Requirements

• Bachelor’s degree in engineering or related discipline
• Minimum 3 years of relevant working experience
• Experience in the design and validation of engineering requirements
• Experience in Source Control Systems, Software Development
• Lifecycle, Object-Orientated Programming and UML
• Proficient in C++ programming language, UML and appropriate usage of design patterns
• Proficient knowledge in at least one core area of equipment software
• Experience in hardware and real time control systems, design patterns, Visual Studio, C++, GIT, Unit Testing, Dependency Injection and/or WPF will be advantageous

Job scope

• Provide correct solution for current production units and those of the same class present in the field
• Maintain focus on quality when challenged with urgent customer requests/bugs
• Maintain a balance between functional design and time to market, ensuring maintainability and scalability
• Responsible for the selection and implementation of design concepts to translate to productionised products
• Provide evidence of appropriate solution for customers via technical reviews
• Undertake continual professional development including both personal and technical competencies
• Perform any other ad-hoc duties as assigned

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Responsibilities:
• To conduct simple quality checks of product
• To adhere to best practices to prevent quality issues
• Responsible for maintaining Good Housekeeping
• To comply with Safe Work Practices when carrying out duties at all time
(Pick up transport from Pasir Ris, Tampines, Bedok!)

Working hours:
Shift 1: Monday to Friday 8am/pm – 8pm/am
Shift 2: Monday to Friday 8am – 5.30pm
Start work immediately!

(No Exp req, Training provided!)

Applicants please email detailed resume in MS Word Format to Richard Chia Heng Yeow (CEI No.: R1104495).
Email: [email protected]

Recruit Express Pte Ltd
EA License No: 99C4599
EA Personnel No: R1104495
EA Personnel Name: Richard Chia Heng Yeow

Responsibilities :

• Drive product failure investigation, perform product failure analysis from field returns and AEC failure, recommend enhancement to countermeasure root cause failure.
• Responsible to create, execute and release Failure Analysis report.
• Provide management and cross functional team with product failure analysis data.
• Develop new lab capabilities based on customer's FA analysis requirements.
• Document new failure analysis operating procedures, training and certification specs.
• Perform routine instrument preventive maintenance and laboratory housekeeping.
• Operate SEM & EDX machine to understand and analyze the elements of the samples provided.
• Operate X-ray machine to check if there are any abnormalities on the samples provided.
• Lead /Supervise the Technician(s) on FA assignment.

Requirements :

• Bachelor Degree in Electronic and/or Electrical Engineering or equivalent.
• At least 1 years of working experience in electronic manufacturing environment will be advantageous.
• Experience of using SEM & EDX machine is highly desired.
• Has an inquisitive mind for new knowledge in addition to having excellent analytical skills.
• Strong in quality improvement tools and techniques.
• Posseses excellent interpersonal and communication skills.
• Knowledge of Microsoft Office Suite.
• 5 days work week (Monday to Friday, 8.15am to 5.15 pm)
• Transport pick-up at Bedok MRT station.

Responsibilities:

Operations Support

• Be responsible for Operations of our ServiceNow Platforms, accordingly to our global operation rules / processes: This includes: Incident management, Platform Upgrades, Release Management, Health checks, Security Checks.
• Ensure proper Platform Administration and admin requests OLA fulfillment.
• Assist in troubleshooting issues and errors within the ServiceNow platform.
• Weekly report to our Global Operation Group leader.

Contribution to SRE (Site Reliability Engineering) activities:

• Contribute within the Global Operation team to SRE activities, aiming at improving operations effectiveness, and improvement of monitoring, automation of operations and admin tasks.
• Contribute to Definition and Documentation of processes or how-To as knowledge base articles.

Project involvement

• Actively participate in ServiceNow implementation and integration projects.
• Contribute to the testing and quality assurance processing during project rollouts.

Training

• Conduct regular training sessions for employees and contractors.
• Maintaining knowledge base articles for end users.

RampUp:

• Ramp Up Knowledge in ServiceNow Platform technology
• Become a Certified System Administrator

Requirements:

• Bachelor’s or Master’s degree in information technology,
• Experience in Systems / Operations / IT.
• Knowledge of programming languages like JavaScript
• Knowledge in Security
• Basic knowledge of ITSM principles and ServiceNOW
• Experience in IT project management, DevOps/Agile
• Fluent in English
• Excellent analytical and problem-solving skills.
• Strong communication and organizational abilities.
• Ability to document processes, configurations, and user guides clearly and effectively.
• Familiarity with HTML, CSS, and web services (REST, SOAP) is beneficial.
• ServiceNow certification (eg. ServiceNow Certified System Administrator)

• In-process inspection of part
• Use of basic equipment, profile projector, micrometer, vernier caliper & high gauge
• Visual inspection using scope
• Upkeep inspection record and samples
• Conduct inspection on first articles and record data in the inspection forms
• Other duties as assigned

Requirements

• At least 1 year QC experience
• Experience in using QC inspection tools
• Able to interpret technical drawing and computer literate
• Basic computer skills (Microsoft Word and Excel)
• Able to program and run CMM machine

Job Description & Requirements

Responsibilities:

• Assembly, fitting, basic tool room machining, mould development, implementing process improvements for tool manufacturing and liaise with machining technician for process planning and scheduling of project.
• Discuss tooling drawing with Designer to ensure tooling design is meeting customer product requirement.
• Assemble, fitting and troubleshooting of tooling related issue.
• Fabricate tooling components and inserts according to tooling drawing.
• Liaise with Production Engineer for execution/planning on mould testing.
• Ensure tool manufacturing and trial meeting planned schedule.
• Initiate corrective action if first article or parts not meeting specification.
• Use various measuring devices including micrometers, calipers, optical measuring machine, gauges and all inspection equipment
• Ensure tool room facilities and equipment are properly maintained and used.
• Ensure tool room health and safety precautions are taken care at all times.
• Participate in Continuous Improvement Project.
• Any other ad hoc jobs assigned by Manager / Supervisor

Requirements:

• Minimum 5 year experience in mould manufacturing toolroom environment.
• ITE or Nitec certificate in Tool & Die Trade.

This role supports the Project Manager. It involves the planning and co-ordination of site work. The person in this role needs to be good at communication and obtaining feedback. Instructions must be given to site personnel in a manner that is easy to understand and the person needs to ensure his instructions are understood correctly. This person will also help the Project Manager with any issues that may arise on site.

Job Scope:
1.) Plan and coordinate site work
- Attend meeting with Main Con and work with PM to prepare relevant information i.e. drawings for approval.
- After approval, update Site Personnel of requirements.
- Prepare necessary permits, drawings to get clearance from authorities.
- Co-ordinate with PM, Site Supervisors and Main Contractor.

2.) Attend site meetings
- Ensure approved construction methods are communicated clearly to site personnel.
- Communicate frequently with PM and Site Supervisors.
- Prepare and pass updated drawings to Site Supervisors.
- Go through drawings and permits and explain to site personnel.
- Clarify with PM if unsure.
- Make decision on behalf of PM if there is a need on site.

- Please note that site can be by the roadsides, at substations or in tunnels. There will be some exposure to the elements.

3.) Submit applications for wayleave to relevant authorities.
- Process for application: Road Opening application, NCE, Purchase of Services Plan, Prepare drawing submission
- Monitor and submit site progress reports
- Submit weekly schedules to client
- Submit monthly progress report to PM

4.) Design of SOP

5.) Training of workforce to reach safety goalposts

Requirements:
- Possess certificate "Manage Workplace Safety and Health in Construction Sites (or Construction Safety Course for Project Managers)".

- Required to sign Permit To Work.
- Proven track record with SP group's projects in high voltage power cable installations.

- Candidates with class 3 license and/or their own transport will be viewed favourably.

- Working hours: Monday - Saturday, 8am-5pm