Job Requirements

1) To Work as lead Engineer for Oil & Gas Project

2) Leading a Team of Electrical Engineers in Preparation & Review of Load lists, Single Line diagram of PCC, PMCC, MCC, DB's, Equipment Sizing Calculation, System Study through ETAP (Version 19.1) and Preparation & Review of Layouts like Hazardous Area classification, Lighting Layout, Cable and Power Layout, Substation Equipment layout, Earthing & Lightning protection Layout.

3) Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies

4) Preparation, Monitoring and Control Engineering Document Control List and expedite for delay/ approvals/resolution of open issues

5) Review and Ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team

6) Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.

7) Preparation of Material Requisition, Specifications, Technical Bid Evaluation for Electrical works.

8) Preparation and Compliance for Engineering Audit Requirements.

9) Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.

10) Technical assistance to construction activities and attending to Site Queries.

11)Reviewing Vendor Drawings for Transformers, Switchgears, Cables, Distribution Boards, Junction Box, LCS, Motors etc.

12) FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

13) Coordination with PMC / QP and Construction Coordination.

14) Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness and correctness in works

15) Inspecting various equipment like LV & MV Bus duct, LV & MV Switchgear, Cables, Transformer, AC / DC UPS

16) Field Engineering Support Activities to complete the task in accordance with the project schedule.

17) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

18) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelors’ Degree in Electrical Engineering

Experience

Preferably Minimum 15 years of experience

Software Requirements

ETAP, DIALUX, Auto cad, MS Excel, MS Word

Engineering technicians,Installation: Setting up and testing products to ensure they work correctly,Maintenance: Performing regular checks and troubleshooting to ensure equipment is operating at its best,Repair: Using diagnostic tools to determine repair plans and fixing issues that may interfere with daily functions,Support: Providing on-site assistance with hardware and software use, and addressing technical issues,Training: Teaching customers how to use their products.

• Apply work permit
• Simple admin duties such as data entry, scanning and filing of documents
• Manage HR Tasks: Handle payroll, CPF, IRAS, and CCL NS claim submissions.
• Recruitment: Create job ads, review resumes, and arrange interviews.
• Daily Operations: Ensure smooth processes for contracts, employee confirmations, terminations, leave management, insurance claims, and onboarding.
• Maintain Records: Keep an accurate HR database and up-to-date employee records.
• Policy Compliance: Ensure HR policies follow current regulations and the Employment Act.
• Any other ad-hoc duties assigned

Job Descriptions

1. Plan, execute and supervise all M&E related facilities maintenance work service. Lead a team of technical officers and technicians for the facilities management activities. Advise and lead the technical (M&E) investigations for rectification works with the manager.
2. Investigate, analyse and determine root cause and report any M&E breakdown and fault effectively.
3. Together with Manager to manage M&E works and services for effective and efficient M&E facilities performance.
4. Coordinate and supervise the M&E installation and maintenance work. Planning and scheduling of preventive maintenance and corrective maintenance works.
5. Carrying out regular inspection and provide recommendation for improvement or rectification work if needed. Conducting regular inspection to ensure all maintenance programme are implemented effectively in strict compliance with instructions and guidelines.
6. Perform troubleshooting and analyse faults and provide recommendation for sustainable and cost- effective solutions.
7. Operate and control automated M&E systems, conduct testing & commissioning.
8. Working closely with the client, sub-contractors, and the project team to resolve any technical issues. Attend M&E related meetings and involve in the preparation of related reports.
9. Monitor work progress, drawings and other relevant documents related to M&E works. Involve in quotation and fault reports.
10. Assist in planning, controlling, and coordinating of mechanical, electrical, and building works. Schedule, monitor and supervise the progress of works. Prepare and following up closely on the enquiries and quotations.
11. Build and maintain good client relationships and uphold high quality standards.

Requirements

1. Minimum Diploma or Degree in Mechanical/ Electrical Engineering or its equivalent.
2. M&E Facilities Management or related M&E fields or FM operations background with at least 3 years of Singapore relevant experience will be an added advantage.

5.5 Days Work Week

Good Bonus and Yearly Increment!!

**Do include your notice period, current and expected salary in the resume.

Candidates looking for Electrical Engineer position or currently working as M&E / Electrical Engineer (For Facilities Maintenance / Management industry) are welcome to apply.

Your new company

My client (West area) is a leading provider of comprehensive utility solutions and value-enhanced energy services, delivering innovative and integrated offerings to their customers.

Your new role

Here is a summary of the role you are applying for;

Join their Mechanical Maintenance team as a maintenance expert, responsible for executing maintenance works efficiently and safely to meet planned schedule requirements.

Below are some of the key responsibilities for the role;

• Performing preventive maintenance to ensure smooth operation of plant equipment and auxiliary systems
• Repairing or replacing defective components of machinery and equipment
• Assisting with contractor monitoring and maintaining asset maintenance plans
• Addressing work orders allocated by Mechanical Engineers

What you'll need to succeed

The successful candidate, should have;

• NITEC in Mechanical Engineering or equivalent
• 3 years of relevant experience in Power Plants or related industries (preferred)
• Self-driven and team-oriented with a positive work attitude
• Strong safety mindset and good workplace safety behavior
• Willingness to be part of the CERT team and participate in emergency responses

What you'll get in return

• Joining a company that is at the forefront of our industry
• Being part of a collaborative and progressive team
• Contributing to a company committed to making a positive impact on the environment and society

What you need to do now

If you believe you meet the specified requirements or know a suitable candidate, please click the link to apply. Alternatively, you may submit your application or referral directly to [email protected].

If this role isn't quite suitable for you, but you're interested in exploring new opportunities, I invite you to contact me for a confidential career consultation. I'm here to help you navigate your next career move.

EA Reg Number: R21102304 | EA License Number: 07C3924 | Company Registration No: 200609504D

Job Summary:We are seeking a skilled Senior Network Engineer to manage and support enterprise network operations, ensuring network reliability, security, and performance. The ideal candidate will possess strong technical expertise in network infrastructure, incident management, and troubleshooting, with a focus on network security and project support.

Key Responsibilities:

Network Operations & Support:

Monitor, configure, and maintain network devices including routers, switches, and firewalls.

Handle incident management, service requests, and change management processes.

Troubleshoot and resolve network-related issues efficiently.

Ensure network infrastructure security by applying ACLs, NAT/PAT, and VPN configurations.

Project Support:

Assist in network upgrade and deployment projects.

Collaborate with senior engineers on network design, configuration, and implementation.

Provide technical support for project execution and closure.

Technical Expertise:

Implement routing protocols such as RIP, EIGRP, OSPF, and BGP.

Apply network monitoring tools and protocols like SNMP, IPSLA, and ManageEngine.

Conduct regular firmware and patch updates on network devices.

Collaboration & Documentation:

Work closely with cross-functional teams to ensure seamless network operations.

Maintain updated technical documentation, including network diagrams and incident reports.

Required Qualifications:

Bachelor's degree in Electronics & Communication Engineering or related field.

Certifications: CCNA (Required) | CCNP (Preferred) | ITIL V4 (Preferred).

Experience: Minimum of 8+ years in network infrastructure and IT service management.

Skills & Competencies:

Proficiency in networking technologies: Cisco, Palo Alto, FortiGate.

Strong troubleshooting, problem-solving, and analytical skills.

Familiarity with IT service management and incident management processes.

Excellent communication, documentation, and teamwork abilities.

Your new company

My client (West area) is a leading provider of comprehensive utility solutions and value-enhanced energy services, delivering innovative and integrated offerings to their customers.

Your new role

Here is a summary of the role you are applying for;

Join their Control & Instrumentation team as a key player in ensuring the reliable and efficient operation of their power plant's control systems and instrumentation.

Below are some of the key responsibilities for the role;

• Lead the execution of maintenance work, ensuring compliance with safety and regulatory requirements
• Respond to plant failures and forced outages, ensuring timely rectification and restoration
• Plan and execute plant overhaul activities with a focus on safety and timeliness
• Develop and implement modification and upgrading plans to enhance system reliability and availability
• Manage procurement and maintenance needs, including spare parts and external services
• Lead and develop a team of technical officers and technicians
• Demonstrate expertise in Control and Instrumentation, safety, and statutory requirements
• Showcase strong work ethics, analytical skills, and communication abilities
• Be available for emergency calls and participate in CERT team responses

What you'll need to succeed

The successful candidate, should have;

• Degree in Electronic & Electrical Engineering or equivalent
• Sound knowledge of Control and Instrumentation
• Good working knowledge of safety and statutory requirements
• Strong work ethics and team player mentality
• Analytical, technology, and communication skills
• Availability for standby and emergency calls
• Knowledge of cyber security (advantageous)
• Safety mindset and good workplace safety behavior

What you'll get in return

• Joining a company that is at the forefront of our industry
• Being part of a collaborative and progressive team
• Contributing to a company committed to making a positive impact on the environment and society

What you need to do now

If you believe you meet the specified requirements or know a suitable candidate, please click the link to apply. Alternatively, you may submit your application or referral directly to [email protected].

If this role isn't quite suitable for you, but you're interested in exploring new opportunities, I invite you to contact me for a confidential career consultation. I'm here to help you navigate your next career move.

EA Reg Number: R21102304 | EA License Number: 07C3924 | Company Registration No: 200609504D

Your new company

My client (West area) is a leading provider of comprehensive utility solutions and value-enhanced energy services, delivering innovative and integrated offerings to their customers.

Your new role

Here is a summary of the role you are applying for;

They are seeking an experienced Mechanical Maintenance Team Lead to join their team. As a key member of the maintenance team, you will be responsible for ensuring the effective maintenance of plant and equipment to achieve high reliability and availability. You will lead a team of maintenance professionals, coordinate maintenance programs, and optimize planned maintenance activities. Additionally, you will troubleshoot faults, perform failure analysis, and implement plant improvement projects to enhance overall plant performance.

Below are some of the key responsibilities for the role;

• Lead and manage a team of maintenance professionals to ensure effective maintenance of plant and equipment
• Coordinate and optimize planned maintenance activities, including scheduled plant inspections and maintenance programs
• Ensure compliance with statutory, regulatory, and safety requirements
• Troubleshoot faults, perform failure analysis, and recommend corrective actions
• Implement plant improvement projects to enhance plant reliability, availability, and performance
• Supervise maintenance contract works and prepare technical specifications for equipment parts and services
• Manage procurement and track expenditure against approved department budget
• Develop and maintain a safety mindset and display good workplace safety behaviour

What you'll need to succeed

The successful candidate, should have;

• Degree in Mechanical Engineering or equivalent recognized by the Professional Engineers Board
• At least 5 years of relevant working experience in plant maintenance from the Power or Oil and Gas industries
• Sound Mechanical engineering maintenance knowledge
• Good knowledge of safety and statutory requirements
• Self-motivated team player with analytical mind, strong planning, and problem-solving skills
• Ability to work effectively in a team and lead day-to-day activities
• Willingness to be part of the CERT team and participate in emergency responses as required

What you'll get in return

• Joining a company that is at the forefront of our industry
• Being part of a collaborative and progressive team
• Contributing to a company committed to making a positive impact on the environment and society

What you need to do now

If you believe you meet the specified requirements or know a suitable candidate, please click the link to apply. Alternatively, you may submit your application or referral directly to [email protected].

If this role isn't quite suitable for you, but you're interested in exploring new opportunities, I invite you to contact me for a confidential career consultation. I'm here to help you navigate your next career move.

EA Reg Number: R21102304 | EA License Number: 07C3924 | Company Registration No: 200609504D

• Location: Tuas Avenue
• Working Days: 5 days (Mon-Fri)
• Working hours : 7:30am to 5:15pm
• Salary Range: $3k - 4k

Responsibilities:

• Monitor the machines and company equipments operational performance and condition
• Conduct preventive maintenance to machine and company equipments as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipments
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Accountable

• Meeting department quality objectives
• Ensure maximized machine uptime
• Ensure planned preventive maintenance is carried out effectively to minimize machine down time
• Ensure sustainable continuous improvement initiatives are carried out on machine, equipment and facilities

Requirements:

Skill Requirements

• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Education, Experience & Training

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years experiences in machine repair and maintenance

Training Requirements

• Quality Management and its related Quality Procedures

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee (Ashley) Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

Join Our Growing Team!

The SKYLINK Group is a premier all-in-one mobility solution provider for retail sales of passenger cars and commercial vehicles, all vehicle leasing, Motor insurance, credit Hire Purchase financing, Motor workshop with full capacity of MRO (Maintenance, Repair and Overhaul) services, and vehicle body engineering works for all commercial and passenger vehicles.

Since 2017, SKYLINK Group has been rapidly expanding its offerings and fleet. We have served over 5,000 corporate customers including major industry leaders in logistics, distribution, F&B, marine, construction, sanitation, and government services.

With a commitment to fleet modernization, we have expanded our offerings to EV and Hybrid vehicles, and continuously aspire to provide greater value to our customers.

Be a part of the SKYLINK family and kick-start your career growth and progression in the mobility space today.

Responsibilities:

• Supervise and assign job to a team of workshop mechanics
• Co-ordinate between workshop and customer, updating of job status
• Prepare job card/orders for customers' requirement
• Perform vehicle controlling in the workshop, check in and out of vehicles
• Perform hands-on trouble shooting on vehicle, ordering of spare parts
• Perform quality control check on vehicles
• Prepare quotation and proforma invoices when necessary
• Job progress follow-up and recommendation of any additional jobs required when necessary
• Oversee workshop housekeeping and workplace safety
• To provide initiative to ensure smooth and efficient operation
• Any ad-hoc duties as assign by superior

Requirements:

• Minimum NTC/Nitec in Automotive Technology or at least 2 years in automotive after sales car & commercial vehicle (workshop)
• Good communication skills and a team player
• Class 3 & 4 driving license with a minimum 2 years’ experience
• Hard working, highly responsible and take ownership in the job
• Computer literate

Seeking individual with keen interest to develop modern digital skillsets and knowledge for quantity survey, data management and analysis of MEP / HVAC / ACMV systems to compete in the current global trend of sustainability and green endeavors.

Scope

• Reporting: Reporting to QS Manager
• Objectives: Participate in tendering process and to successfully bid for projects
• Quantity Survey: Collect data for management and analysis of cost estimation, budgeting, contract administration and procurement. (Individual Scopes follows below)
• Cost Estimation and Budgeting: Develop comprehensive and strategic cost estimates for tenders and projects, taking into account project specifications, current market rates, and labor costs. Prepare and present these estimates, transforming data into actionable insights and deliverables that meet tendering requirements and enhance the likelihood of successful bidding.
• Contract Administration: Work with Contract Manager to prepare and review contract documents, tender documents, and bills of quantities in accordance with the Building and Construction Authority (BCA) guidelines and Singapore's regulatory framework, ensuring strict compliance across work done.
• Procurement Management: Coordinate with suppliers, contractors, and/or consultants for the procurement of materials, equipment, and services, ensuring optimal cost efficiency and quality control.

Requirements

• Diploma or Degree in Mechanical Engineering, Electrical Engineering , Sustainable Infrastructure in Building Services, Quantity Surveying or equivalent /
• Experience in MEP / HVAC / ACMV is added advantage
• Experience in Data Analysis concepts is added advantage
• Knowledge in modern digital solutions like modelling take off software, RPA, advanced Excel / Google Sheets skills, utilising AI / ML are added advantage.
• Strong literacy in English and willing to learn in a changing industry.
• Interested candidates with MEP / HVAC / ACMV field experience are welcomed to apply.
• Fresh graduates welcomed to apply, training will be provided.

Advantages Remunerations

• 5 day work week.
• Progression-centric
• AWS included
• Variable Performance Bonus
• Annual Incentive Trip
• Further learning/education encouraged and sponsorships
• Flexible working hours and Work from home accepted on top of physical attendance
• Various Medical Benefits

• Source for tenders
• Analyse tender documents, drawings and specifications
• Conduct quantity take off and estimate costs
• Coordinate with suppliers and sub-contractors to prepare costing for tender submission
• Prepare tender and supporting documents for submission
• Follow up on any technical clarifications during post-tender stage
• Attend site showrounds and tender interviews
• Prepare sub-contractor agreement, work order and VO
• Monitor project progress and control budget
• Collaborate with Project Team to track work progress for claim submission to Main Contractor
• Assess sub-contractor's monthly claims and prepare payment certificate/response

Job Requirements

• Degree / Diploma in Mechanical Engineering or equivalent.
• Minimum 2-4 years experience in Construction, preferably in handling ACMV / HVAC projects for building construction industry.
• Knowlegeable of ACMV details, local codes and regulations.
• Strong interpersonal and written communication skills.
• Ability to work independently while being a good team player.
• Strong follow up and closure skills

Responsibilities:

-Responsible for all technical support of new product introduction, including product improvement, component production, and the entire process of product assembly and packaging
-Responsible for effective change management: implementation of Engineering Change Notice & get
customer approval for Engineering Change Request
-Receive initial product training, compile, and update product assembly instructions, be responsible for the complete transfer of product technical details from the customer to the company, and continuously improve, and innovate processes and technologies.
-Contact the customer's designated personnel on product-related technical issues.
-Responsible for training the assembly team and implementing improvements within the production team.
-Establish assembly work instructions based on customer & specifications.
-Monitor, identify, develop, and implement improvements in process control systems and equipment.
-Create Bill of Material & routing in ERP for assembly.
-Troubleshoot and optimize assembly processes and follow up with production Improve process robustness, yield, product quality and process time.
-Define and follow up on special tooling requirements.
-Manage customer documentation (drawings, specification, etc.)

Education:

-Possess at least a Degree in Mechanical Engineering or Mechatronics or equivalent.

Skills:

-A minimum 2 years working experience in high precision mechatronics assembly or design.

Experience:

-Knowledge and direct experience in mechanics, electronics, control systems, pneumatics, hydraulics in semicon industry.
-Knowledge in Assembly of mechatronics systems, linear motors, sensors, servos, actuators, dynamics, controls, etc.
-Complex mechatronic systems for test and qualification of design changes.
-Exposure to multi-disciplinary projects, such as imaging/optical systems, semiconductor, or lithography preferred -but not mandatory.
-Able to perform root cause analysis and resolve problems on a conceptual and advanced troubleshooting level.
Proficiency in reading and updating technical drawings.

1. Responsible for reviewing and preparing accounting vouchers and other accounting processing work, verifying and processing transactions

2. Responsible for the company's tax declaration work, maintaining good communication with the tax department, timely understanding changes in tax policies, and ensuring the company's tax compliance

3. Cooperate with the company's financial management work, complete the preparation of internal financial management reports, and provide reference basis for the company's daily management decisions

4. Company personnel salary accounting and other related matters.

Job Requirement:

1. Bachelor's degree, major in financial management, accounting or related fields

2. Have more than 3 years of experience in financial accounting management, with good accounting knowledge and skills, proficient in Office software

3. Possess basic financial accounting analysis skills, able to analyze and optimize the company's financial situation

4. Strong communication and coordination skills, able to effectively communicate and cooperate with other departments

5. Strong written and oral communication skills, good at communication, proactive management and team spirit.

6. Singaporean or Singapore PR preferred

Job Description:

Technical Support:

• Respond to and resolve IT support requests via phone, email or ticketing system
• Diagnose and troubleshoot hardware, software and network issues
• Install, configure and maintain computer systems and software applications

Hardware and Software Management:

• Manage the setup and maintenance of laptops, printers and other IT equipment
• Perform regular updates, patches and upgrades to ensure optimal performance and security

Network Support:

• Assist in maintaining LAN/WAN connectivity, Wi-Fi setups and VPN configurations
• Identify and resolve network related problems, including internet outages and connectivity issues

Incident and Problem Management:

• Log and track issues using a Service Desk Management tool
• Escalate unresolved problems to higher-level support teams or vendors
• Follow-up to ensure timely resolution of incidents

Security Compliance:

• Support adherence to IT security policies and procedures
• Assist with data backups and cybersecurity measures
• Maintain an accurate record of all service assets and configurations

Job Requirements:

• Applicant MUST meet these minimum qualifications to be considered an applicant
• Minimum 5 years of IT support or equivalent experience
• BS in Computer Science, Information Technology, or related field or equivalent experience preferred
• Experience in administration of Microsoft technologies such as Active Directory, Office 365, SharePoint
• Familiarity with networking fundamentals (TCP/IP, DNS, DHCP)
• To possess relevant certification with ITIL frameworks; Microsoft Certified
• Strong problem-solving and analytical skills
• Excellent communication and interpersonal abilities
• Pleasant attitude, approachable and friendly demeanor
• Ability to manage time and multitask effectively
• Patience and adaptability in handling technical issues and working with users of varying technical proficiency

Responsibilities:

• Ensure proper risk assessment is in place to provide a safe working environment for workforce by periodically reviewing risks and hazards associated to workplace, executing control measures and communicate effectively to workforce.
• Respond to technical queries from subordinates to account for timely project completion by consulting relevant parties such as mould loft and engineering department for practical solution.
• Monitor quality of welding and NDT completion on end products to prevent carry over work to next station by preforming on site checks and reviewing NDT records.
• Set daily targets for workforce to achieve to account for timely project completion by monitoring daily output and conducting daily reviews of the results.
• Study production drawings to spot possible mistakes or possible fabrication issues to ensure production schedule can be met without unexpected delays by detailed discussion and review of drawings with technical staffs.
• Prepare weekly report on progress and KPI to ensure project progress in on track by monitoring block status and compiling production progress data from site.
• Identify bottlenecks to ensure no unexpected delays to project progress by conducting meetings with subordinates, analyzing weekly reports and formulate optimal production flows for any issues identified.
• Review manpower allocation and effectiveness to ensure project progress is on track by analyzing daily and weekly KPI against progress, discussing with managers should additional manpower or reallocation of manpower is needed.
• Performs supervision on site to ensure fabrication work have been safely executed accordingly to drawings and quality requirements to account for timely project completion by checks on the floor, communicating and getting feedback from workforce.
• Identify the production capacity and plan station schedule to ensure accordance to sequence by comparing to hullshop master schedule and hullshop historical productivity data.
• Set the KPI and manpower allocation for each station to achieve required schedule by analyzing workforce and facilities capabilities and historical date and previous projects.
• Study project requirements, identify any gap that exists with current hullshop practices and propose recommendations to close the gaps to ensure no unexpected delays to project schedule by conducting reviews and meetings with QA and QC personnel.
• Ensure Standard Operation Procedures (SOP) in place so that work can be performed according to project requirements by communicating SOP's to workforce.
• Determine block fabrication sequence to ensure most effective way to fabricate blocks by analyzing drawing and 3D model and holding discussion with production and mould loft team.
• Ensure proper lifting plan is available for blocks to account for safe block lifting by advising engineering lifting team on block fabrication method in advance.
• Review subordinates competency to ensure effectiveness in performing work by analyzing productivity data, non conformance received and feedback from QA, QC and clients.
• Take active role in Incident Investigation to find root cause and proper preventive measures are implemented by conducting interviews with injured person(s) and witnesses, analyzing accident scenes and other investigative processes together with HSE Team.
• Propose training required by workforce to prevent shortfall in certain roles by compiling workforce skills and comparing with production requirements.
• Participate in Safety Innovation Programs by actively contributing to department Safety Innovation Team

JOB REQUIREMENTS

Requirements:

• Degree in Engineering
• At least 3 years of relevant working experience, preferably in marine/ offshore industry
• Knowledge of functional and operational requirements related to design of all types of ships and offshore vessels
• Knowledge and experience of his engineering field
• Knowledge of regulatory and class requirements
• Able to read and understand engineering drawings
• Possess good communication and interpersonal skills
• Possess supervisory skill to coach and motivate staff
• Able to work in a team
• Proficient in Microsoft Office and engineering design software (e.g. Tribon, GEMS)

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Roles & Responsibilities

Electrical Supervisor Responsibilities:

• Plan and schedule projects
• Estimate the time and materials needed to complete projects
• Maintain records and documentation relating to the ongoing completion of projects
• Supervise electricians and aircon wokers as they work, providing guidance and instruction as needed
• Ensure that work complies with all safety requirements
• Perform electrician tasks as needed
• Initiative & Innovative needed

Electrical Supervisor Requirements:

• Diploma / Higher Diploma in electrical / Aircon or a related field experience is strongly preferred
• Aircon knowladge is advandage
• Previous experience as an electrical supervisor is highly beneficial
• In-depth knowledge of the electrical industry
• Strong leadership skills
• Familiarity with relevant state and federal codes and safety requirements
• Basic technical literacy

• Diploma / Degree in Civil Construction engineering industry.
• At leat 1 year experience in construction & 2 years MRT experience
• Site engineer with minimum of 2 years’ experience in underground/tunnelling projects
• Must have experience in diaphragm wall and bored-piling

Client: A1 Main Contractor
Location: Hougang Area
Working Hrs: 7.30am – 6pm, 7.30am -12pm (5.5 days week / 6 days)
Salary: $4000 – $5000, Depending on Qualification, Experience & Capability.

Annual Leave: 14 days + Performance Bonus

TO APPLY:

Send in your detailed resume to [email protected] or Whatsapp 89101675

Subject: Site Engineer / Senior Engineer > MRT Project

1) Use MS Word format. (No PDF File*)
2) BioData
3) State your Expected Salary, Current & Last Drawn salary for “ALL” previous employers
4) The Notice Required and Availability Date
5) State all projects handled eg. MRT project and duration

** Our Consultants will contact you for an interview.

1. Plan, organise and manage WHS activities within the sites to cultivate good EHS practices.
2. Perform Risk Assessment and draft safework procedures with clients for submission before start of project
3. Conduct induction for new workers on in-house safety regulations
4. Conduct Risk Assessment and safework procedures briefing to the workers
5. Site inspection and conduct safety meeting
6. Report and investigate accidents and incidents at sites
7. Participate in internal audits and review of Safety Management System
8. Maintain HSE controls and process within Company’s policies and government’s regulations
9. Accident investigation and submit I-Report when necessary
10. Develop Emergency Response Plan for audits
11.Prepare forms to be implemented in the workplace such as safety checklist, RA forms etc.
12. Candidate must possess at least a post secondary Diploma with at least 6 years relevant construction project safety experience in singapore
13. must possess professional knowledge in Law and regulations (WSH Act and Environment)

We are seeking a highly skilled and motivated Service Engineer to join our team. The ideal candidate will be responsible for providing technical expertise, performing maintenance, and delivering support services to ensure the efficient operation of equipment and systems.

• Designing and developing electrical systems for marine vessels
• ⁠Installing and commissioning electrical systems on ships
• Supervising the work of marine engine technicians
• Inspecting and testing electrical systems and equipment
• Maintaining and repairing electrical systems and equipment
• Designing tray routes and electrical panel positions
• Creating single-line diagrams of lighting and other electrical panels
• ⁠Supervising the installation, cabling, and termination of electrical equipment
• Independently testing and Commissioning electrical panels
• Presenting surveys of electrical systems to relevant authorities

About TUMCREATE

TUMCREATE is a multidisciplinary research platform of the Technical University Munich (TUM) at the Singapore Campus for Research Excellence and Technological Enterprise (CREATE). We are joining forces with universities, public agencies, and industry for the advancement of future technologies.

A new multi-disciplinary project named “Centre for Energy & Emissions Modelling (CE2M) Phase 2” hosted by A*Star with TUMCREATE as one of their partners has been launched. The overall goal of this project is to provide policymakers with a toolbox to explore pathways to “net zero” in Singapore. For this purpose, an existing model integration framework shall be enhanced through a systems of system modelling & simulation approach. Different models will be coupled using interfaces that enable them to communicate with one another.

Please visit www.tum-create.edu.sgfor more information about TUMCREATE.

Objective of the position:

We are looking for an experienced Software Engineer who will work on building interfaces between models and to expand existing models to facilitate model coupling. This is a 24-month fixed term contract with the possibility of extension.

Job Responsibilities:

• Familiarise with and review existing models developed by the project partners.
• Identify weak points of the models, particularly with regards to interfacing them with other models.
• Define and implement interfaces between the models.
• Contribute to the development of a system-of-systems model that includes all models.
• Presentation of the results in at least one international scientific journal.

Job Requirements:

• PhD or Master’s degree in Electrical Engineering, Computer Science or a related field from a reputable university.
• Knowledge of software development and versioning systems.
• Programming knowledge of Python.
• Experience in software modelling, preferably in the field of energy and power systems.
• Knowledge of energy and power systems is preferable.
• Knowledge of the tools URBS and TIMES is a plus.
• Ability to interact with other researchers and define a working structure.
• Good English writing and communication skills.
• Good interpersonal skills for working in an international research team with people of different backgrounds.

What TUM CREATE offers you:

• Competitive salary that commensurate with experience
• Medical insurance
• Good amount of leave/vacation days
• Vibrant, modern and positive working environment in Singapore
• Campus-sited office location with a host of facilities
• In-building perks including gym, game room and coffee room

Applications:

Please send your application including cover letter and CV to [email protected].

We look forward to receiving your application.

Construction operations encompass the critical processes that turn plans into finished projects. They involve coordinating every stage of construction, from preparing the site to the final handoff. These operations ensure everything runs smoothly by aligning schedules, managing resources, and addressing challenges as they arise.

Engaging in construction operations means orchestrating a variety of tasks, including sourcing materials, adhering to safety protocols, and employing modern technologies to enhance efficiency. Tools like Building Information Modeling (BIM) help with precise planning, while on-site monitoring technologies ensure progress stays on track. Success here is about preparation and flexibility, balancing the needs of the project with unforeseen changes.

Ultimately, construction operations are about managing both tasks and teams. Bringing together project leaders, subcontractors, and stakeholders requires clear communication and a commitment to quality. The goal is always to deliver a project that meets expectations, stays within budget, and achieves deadlines while maintaining safety and efficiency at every step

1. Responsible for creating test plans or any other QA documents in accordance with the Company’s requirements.
2. Must have worked on tools like Selenium for front end testing and mobile testing
3. Strong technical skills with hands on experience in programming with Java and/or VBScript
4. Write clean, high-quality scripts that test product functionality automatically.
5. Conduct various tests for systems, networks, applications, databases, software.
6. Identify specific cases that should be automated and discuss them with manual QA engineers.
7. Develop the best automation solutions based on the requirements.
8. Collaborate with cross-functional teams to find ways on how automation can improve the workflow.
9. Troubleshooting automation software and finalizing system procedures.
10. Develop/maintain automation test scripts.
11. Execute and manage automation test cases and results.
12. Any other ancillary tasks or works as and when requested and assigned by the Company

Qualifications

1. Bachelor’s degree in computer science, software engineering, or a similar field
2. Good Knowledge of SDLC and agile processes, test methodology and different types of testing
3. Strong technical skills with hands on experience in programming with Java and/or VBScript
4. Excellent analytical skills
5. Strong attention to detail
6. Excellent communication skills and able to work independently and with automation team
7. Minimum of 3-5 years of experience in test automation

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets