Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Senior Software Engineer

Salary: $6000 to $8000 (depends on experience)

Working Days: 5 Days (8am/8.30am - 5.30pm/6pm)

Work Location: Yishun Industrial Park, (Canberra MRT) / Have company transport

Role:
As a Senior/Staff Software Engineer, you will be required to develop solutions for SPI, factory line and their associated modules and configurable options. You will also be responsible for solving complex engineering problems using new or existing technologies, and through innovation, creativity, and technical analysis with a strong focus on quality.

Responsibilities:

• Lead technological solutions to maintain and extend an advantage in a competitive market
• Handle complex software design tasks to predetermined schedules with a strong focus on quality
• Maintain focus on quality when challenged with urgent customer requests/bugs
• Maintain a balance between functional design and time to market, ensuring maintainability and scalability
• Responsible for the selection and implementation of design concepts to translate to productionised products
• Provide evidence of appropriate solution for customers via technical reviews
• Undertake continual professional development including both personal and technical competencies
• Guide and support the junior team members on their professional development
• Perform any other ad-hoc duties as assigned

Requirements:

• Master’s or bachelor’s Degree in engineering or related discipline
• Minimum 5 years of relevant working experience
• Experience in analysis of software design and implementation for hardware systems
• Experience in the design and validation of engineering requirements
• Experience in Source Control Systems, Visual Studio and Software Development Lifecycle
• Proficient in C++ programming language, UML and appropriate usage of design patterns
• Proficient knowledge of appropriate equipment software and
• Experience in Unit Testing and Dependency Injection
• Experience in WPF, GIT, hardware and real time control systems will be advantageous

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Job Descriptions:

- Review and Summarize Enquiry, Identify Scope of Works and Prepare Commercial Proposal

- Quantity Checking and Preliminary Costing including getting Downstream Consultant Price

- Compile Supporting Documents for Tender / Proposal submission

- Follow Up and Negotiate on contract

- Review Terms and Conditions of Contract from client

- Prepare, Submit and Follow Up on Progress Claim, Tax Invoice and Payment Collection

- Closing of Project Account upon Project Completion

- Reporting to Senior QS / Directors

Requirements:

- Candidate must possess at least a Bachelor Degree in Quantity Surveying or Civil Engineering, Building or equivalent from a recognized university

- At least 2 Year (s) of working experience with strong knowledge of Local Construction Practices

- Effective Communication Skills and Enjoy Interacting with people at all levels

- Meticulous, an eye for Details and Sensitive to Figures / Numbers

- Positive Attitudes / Drive for Result and Willing to Learn

- Good Self-Discipline and Ownership of Task

• Work Location: Yishun Industrial Park A [ Canberra MRT] / Have company transport
• $4500 to $6500 depends on experience
• Working Days: 5 Days // 8am/8.30am - 5.30pm/6pm

Role:

As a Software Engineer, you will be required to maintain and manage applications of current and developing technology, and undertake engineering design, development, and operation of SPI solutions, factory line solutions, and their associated modules and configurable options with a strong focus on quality.

Requirements

• Bachelor’s degree in engineering or related discipline
• Minimum 3 years of relevant working experience
• Experience in the design and validation of engineering requirements
• Experience in Source Control Systems, Software Development Lifecycle, Object-Orientated Programming and UML
• Proficient in C++ programming language, UML and appropriate usage of design patterns
• Proficient knowledge in at least one core area of equipment software
• Experience in hardware and real time control systems, design patterns, Visual Studio, C++, GIT, Unit Testing, Dependency Injection and/or WPF will be advantageous

Job scope

• Provide correct solution for current production units and those of the same class present in the field
• Maintain focus on quality when challenged with urgent customer requests/bugs
• Maintain a balance between functional design and time to market, ensuring maintainability and scalability
• Responsible for the selection and implementation of design concepts to translate to productionised products
• Provide evidence of appropriate solution for customers via technical reviews
• Undertake continual professional development including both personal and technical competencies
• Perform any other ad-hoc duties as assigned

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

• Location: Gul Crescent
• Working Hours: 8.15am - 5.30pm
• Working Days: 5 Days [Monday - Friday]
• Salary: $3000 - $4000 + $1020 (transport allowance)+ $70 (phone allowance)

The role is to market a full range of Professional & Industrial Cleaning equipment, and accessories & tools, to corporate customers, with an emphasis in oil and gas sectors.

Responsibilities:

• Serve existing assigned accounts and prospect potential new customers
• Learn & familiarise our products well, understand users’ needs, and so be able to offer solutions and assistance to meet their requirements
• Perform hands-on product demonstrations, as well as occasionally conduct presentations to mid-size audiences including management levels

Requirement

• Polytechnic Diploma or equivalent; preferably in a business associated or engineering related field
• Experienced in corporate/industrial sales, especially in the oil and gas setting
• Preferably hold a Class 3 driving license and own a car

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

You will be part of the team responsible for the operational support of Authority's Service Desk and expected to work independently. Your primary responsibility is to ensure system functionality, availability, data security, and compliance with industry standard.

Responsibilities:

a. Providing level 1 technical support and respond to user inquiries via phone, email and ticketing system.

b. Hardware – installation, maintenance and trouble-shooting.

c. Diagnose and resolve hardware and software issues for end-users.

d. Escalate complex issues to higher-level support teams as necessary.

e. Maintain and update service desk documentation and knowledge base articles.

f. Proactively identify and manage potential problems

g. Conducting regular checks to ensure all endpoints are patched to the latest version.

h. Conducting regular checks to ensure all endpoints and communication devices in meeting rooms are working properly.

i. Collaborate with other IT team members on projects and initiatives.

j. Provide training and guidance to end-users on IT systems and software.

You will be working closely with the Service Delivery Manager and other Workplace Technology support team to ensure that all endpoints and communication devices are provision for properly and all incidents and service requests are resolved in a timely manner.

* Design, analysis and plan for Civil & Structural engineering works
* Liaise with consultants, contractors & authorities from inception to completion of projects on C&S matters
* Responsible for timely submission of plans and reports to authorities and clients
* Manage projects to meet the time, cost and quality objectivies
* Coordinate and monitor work progress at site including periodical site inspection and attending meeting
* Assists in other ad hoc duties as assigned

Requirements:

• Able to work independently with minimal guidance.
• Proficient in MS Office/Excel
• At least 3 years of local construction experience
• Knowledge in BIM / Revit software is added advantage.
• At least Diploma/ Degree in Civil & Structural engineering or equivalent recognized by the Professional Engineers Board
• Fluent in English , Good project management and communication skills

· Provide hardware support and services to colleagues.

· Manage basic stock of IT equipment and place orders as necessary.

· Possess knowledge of Microsoft Active Directory (ADDS) and Firewall Administration, particularly with Sophos.

· Offer hands-on assistance with system setup onsite or guide users through the process remotely.

· Assist with installation and integration processes, address security issues, and manage program upgrades.

· Provide remote technical support and troubleshooting via phone or chat.

· Attend to various ad-hoc IT support requests as needed.

Senior Laboratory Analyst

• Work Location: Jurong Island (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range: $2800 - $3200 + $200 (site allowance)

The Senior Lab Analyst is part of the pioneer team in the startup of EVAL production line, assisting the Chemist in setup of QC Laboratory at new EVAL site, including training of Laboratory analyst, Laboratory system establishment and management to achieve safe and stable commissioning and startup of the new plant.

Responsibilities:

• Perform raw material, intermediate and final product Quality analysis.
• Interpret and report test results accurately and timely based on test method.
• Supports troubleshooting technical issues pertaining to equipment and analysis.
• Support establishment and maintenance of lab system and equipment validation and calibration.
• Maintenance of quality document and development of quality procedures.
• Provide training to Laboratory Analysts and Process Technicians in analysis instrument procedures.
• Manage and maintain chemicals, reagents, and consumables.
• Support Procurement process and upkeep of inventory.
• Implement and improve analytical and equipment work process.
• Implement and participate in safety and quality improvement activities.
• Other works as assigned by Superior.

Requirements:

• Diploma in Chemical Process Technology or Science related field.
• Min 5years experience in analytical laboratory environment.
• Hands-on experience with GC, ICP, Titration and polymer testing equipment
• Hands-on experience with equipment calibration and reagent preparation.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Senior/Civil & Structural Design Engineer (A1 main contractor)

Our client is a leading reputable A1 main contractor renowned for their impressive portfolio of iconic mixed development, residential and industrial building projects across Singapore. They’re now looking for a Senior/C&S Design Engineer to join them for an iconic institutional building project in the CBD area, supporting their ongoing contributions to the Singapore building landscape.

Job Responsibilities

• Provide technical expertise in the design and coordination of the civil and structural aspects of our construction projects.
• Work closely with project teams to ensure that all structural elements are designed to meet project specifications, regulations, and quality standards.
• Coordinate and liaise with relevant stakeholders to ensure the design complies with all requirement
• Prepare and present technical engineering reports, calculations, drawings, and specifications for project designs.
• Participate in the value engineering process to ensure cost-effective and efficient design solutions.

Requirements

• Degree in Civil/Structural Engineering, Construction Management, or related field
• Minimum 4 years of relevant building project/steel structures experience
• Possess knowledge of preparing construction sequencing drawings
• Experienced in resolving site issues too

Location: Central

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

The person will be responsible for

1) Prepare & compile Monthly Progress Claim for all the projects;

2) Prepare & submit Variation Order for all projects where applicable;

3) Quantity Take-off;

4) Assist in monitoring & compilation of all ISO 9001, ISO14001 & ISO45001 documentation for Audit & BCA Accreditation;

5) Any others relevant task that maybe assign from time to time

Qualifications : Diploma in related field;

Experience : Fresh or 2 years relevant experience will be added advantage;

Geotechnical Engineer, for COWI in Singapore

Are you interested in joining one of the leading consulting companies, creating value for customers, people and societies world-wide? Are you a dedicated and proactive engineering and have experience in underground MRT stations and tunnels? If you can answer 'yes' to both questions, this could be the next step in your career.

JOIN OUR COWI INTERNATIONAL TEAM

With over 93 offices worldwide, COWI is a leading international consulting group providing clients with innovative and sustainable solutions to complex challenges within transportation, energy, environment, water, industry, buildings and planning. Together with our over 6,500 dedicated professionals, COWI pushes the boundaries of engineering design around the globe.

As a member of the SE Asia team, you will support local and international projects across the transportation and energy sectors, including railways, highways, metros, marine, wind, hydro, and more.

You will be joined by hundreds of skilled experts, collaborating over the entire lifecycle of a project – from idea, concept and design, to operation and maintenance within our portfolio of tunnels & underground structures, bridges, complex structures, ground engineering and reclamation projects.

DESIGN THE FUTURE WITH A GLOBAL TEAM OF EXPERTS

This is a superb opportunity for you to develop your career and work for one of the industry's foremost tunneling and civil engineering companies, based from our Singapore office.

As a Specialist, Geotechnical with a broad range of high-level technical experience, you will work closely with the structural team to design various structure especially underground MRT stations and tunnels.

On a day-to-day basis, you will be responsible for:

• Designing a variety geotechnical designs for ERSS, geotechnical and civil engineering projects, liaising with clients and other stakeholders.
• Detailed geotechnical design and analysis
• Ensuring that design, assessments and checking of designs are in accordance with the current Standards, Codes of Practice and Best Practice
• Review/checking/approval of designs, assessments and calculations in accordance with quality procedures
• Preparation of risk assessments and full compliance with DfS
• Coordination of work undertaken by external sub-contractors and design checkers and Client management

COWI is a leader within its field, because our employees are leaders within theirs. We invite you to learn from the best and expand your potential in an outstanding environment, where we collaborate on shaping tomorrow's societies. Alongside your manager, you outline the path for your development and build your expertise on a day-to-day basis, working on global and local assignments.

YOUR SKILLS. OUR TEAM. TOGETHER, WE DESIGN THE FUTURE

Your skills are the key to our success. Working across borders and disciplines, we share knowledge and build strong relationships with colleagues and customers. You contribute your expertise and get to learn from the best.

To succeed in this position, we believe that you should have excellent communication and rapport building skills.

Furthermore, you shall have:

• Sound understanding of DfS Regulations, specifically the designer's requirements and the risk assessment process
• Ability to manage own time
• Must have excellent communication skills, both verbally and in writing.
• Ideally, you will have experience in ERSS designing of underground MRT station
• Ability to manage small projects
• Ability to interface with other disciplines

DO YOU HAVE ANY QUESTIONS?

Please write to Ms Sani [email protected]

HOW TO APPLY

Click on the link below and tell us why you are the right person for this role. We look forward to receiving your application as soon as possible since the recruitment process is ongoing. The application deadline is stated at the top of the page.

EQUAL-OPPORTUNITY EMPLOYER

COWI provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, colour, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, COWI complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

• Responsible (review and check) Process Engineer/s and Process Supervisors works.
• Define System Design Deliverables and review with leads to finalise that suit to the project.
• Scope of works to review with leads and get confirmed with client.
• Develop and / or review design documentation as per Deliverable List with leads e.g. Process Flow Diagrams Piping and Instrumentation Drawings, System Layouts, Equipment and Instrumentation data sheets.
• Review and participate in tendering activities (tender preparation, tender interview/clarification meetings, evaluate proposals submissions and Tender Recommendation Report preparation).
• Perform engineering reviews on vendor documentation to ensure compliance and completeness in technical scope.
• Brief Process Engineers/Supervisors on the project scope and ensure system complete on schedule.
• Participate in Risk and Process Hazard Analysis.
• Prepare budget and cost estimations.
• Mentor and provide guidance to Process Engineers in their work.
• Support implementation of Engineering Efficiency activities.
• Plan, organise and approve Inspecting and Test Plant, Inspection Qualification and Testing and Commissioning.
• To take role as Work Package Owner (WPO) responsible for packages progress to completion with help of supervisor and final handover documents.
• Promote safe work practises.
• Promote commercial awareness.
• Participation in providing inputs to Knowledge centre and utilization of temp plates, materials.
• BIM Modelling internal reviews with BIM/CAD Team , CSA & MEP counter parts and review with client for LOD 400, 450 and 500
• Ad-hoc duties as determined by Management.

Job Qualifications:

• Bachelor’s Degree in Chemical or Environmental Engineering
• Diploma holders with additional 2 - 3 years’ experience unless equated with professional certifications.
• With 6 - 8 years of relevant experience
• Experience in design and/or construction in either Deionised/Ultrapure Water or Wastewater or Chemical or Gas Systems
• Experience in leading team in throughout project cycle start from concept design, detail design, construction, testing and commissioning, handing over.
• Understanding of Codes and Engineering Standards of International Clients.
• Conversant in the use of design software.

Descriptions

• Plan, execute and supervise all M&E related work services.
• Manage M&E works and services for effective and efficient M&E facilities performance.
• Coordinate and supervise the M&E installation and building maintenance work.
• Working closely with the client, sub-contractors, and the project team to resolve any technical issues. Attend M&E related meetings and involve in the preparation of related reports.
• Involve in the preparation of the method statement, work progress, drawings and other relevant documents related to M&E works.
• Assist in planning, controlling and coordinating of mechanical, electrical and building works.
• Schedule, monitor and supervise the progress of works .
• Prepare and follow- up closely on the client inquiries and quotations.
• Follow the company internal work processes and documentation.
• Involve in conducting toolbox meeting and coordination meeting.
• Coordinate, liaise and communicate with people of all levels
• Build and maintain good client relationships and uphold high quality standards.

Requirements

• Minimum Diploma / Degree in Engineering or Facilities Management related qualifications.
• M&E Facilities operations background with at least 3 years of experience will be an added advantage. Advantage to have Fire Safety Protection Certification.
• Candidates looking for Electrical Engineer position or currently working as M&E / Electrical Engineer (For Facilities Maintenance / Management industry) are welcome to apply.

Tan Choon Hau

Senior Talent Acquisition Consultant

EA Licence No:18C9251

EA Reg ID: R1988835

· Able to study project schedule and plan site works on a daily basis

· Ensure works are carried out according to schedules and are on target to completion.

· Implement carpentry works and inspections.

· Reports any defects/non-compliances to Project manager.

· Minimum 10 years of working experience in construction site especailly for RC works

· Experience of medium/large projects for MRT

· Conversant in statutory code and requirements

Job Description:

• Responsible in preparing documentation including daily report, monthly progress report, method of statement and work procedure to project manager.
• Responsible in overseeing drawing management and make sure the updated drawings to the clients and subcontractor are issued.
• Assist the project manager or senior project engineer in coordinate with related consultant and quantity surveyor on the change order issued
• Coordinate and work closely with safety personnel to ensure all government and safety regulation are complied.
• Conduct weekly or monthly meeting with sub-contractors to update the progress of work.

Job Requirements:

• Good interpersonal and communication skill
• Good organization skill
• Able to multitask
• Able to work under fast paced environment

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a QA Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Job Duties & Responsibilities:-

• Overseeing the procurement of materials.
• Coordinating with the various clients , consultants, main-contractors , architects, sub contractors and specialist to ensure the smooth and timely execution of the project deliverables.
• Ensuring that all works are carried out in accordance with the project specifications.
• Ensuring that all works are carried out within the project budget given.
• Overseeing the various design elements of the project.
• Providing timely submissions for cash flow and progress claims.
• Procurement of materials and ensuring the timely delivery of the materials as per site requirement.
• Ensuring that all team members can deliver their daily works and that the team meets the project requirements.
• Monitoring and improving of overall project progress to meet critical milestone dates.
• Submission of monthly / weekly progress and safety reports.
• Reporting of all project matters to the management.
• Preparing and presenting of consolidated contractual claims to the client representives.
• Any other works/tasks given by the Management for the completion of the project and other Ad-hoc assignments.

Roles & Responsibilities

• To handle the full spectrum of project management
• To lead a site Management team to complete the project on time and within budget
• To inspire and motivate the site team to work effectively and efficiently
• To enforce appropriate measures so as to comply with the required standard of safety in execution of tasks.
• To drive high productivity on site using relevant cost saving methods at all times.
• To ensure that the documented Quality and workplace health and safety (WHS) policies are effectively implemented, maintained and reviewed.
• To ensure the Project Quality and WHS objectives are being met and any discrepancies are being addressed immediately.
• To ensure that the overall phases of the project is effectively coordinated and organized.
• To liaison with the client, consultant, suppliers (sub-contractors) and other relevant authorities on management issues pertaining to the project.

Requirements:

• Degree / Diploma in relevant Engineering discipline.
• Must have at least 5 years of post-graduate experience in project management
• Ability to handle Projects independently.
• Ability to display initiative in execution of tasks and being pro-active in the delivery of tasks
• Dealing professionally in managing tasks and consistently meet tight deadlines
• Attention to details and good problem solving skills

Duties/Responsibilities

Drive Project Operations Dept.

1. Assists Project Manager to overseas the projects in charge

2. Ensure the project engineering issues are on schedule/within budget

3. Work closely with Engineering Service dept. to ensure accurate & updated construction drawing

4. Work with Supply Chain & Procurement on machinery and materials orders

5. Monitor all the material wastage

6. Deployment of resources (manpower, material, machineries) required to achieve project schedules

7. Ensure the sub-contractors to achieve project requirement & schedule

Prepare Risk Management Plan

1. Build contingencies in to the plan to provide a reserve in the schedule for unforeseen future problems

Administer Workplace Safety and health (WSH) and Environmental Management Systems (EMS)

1. Ensure workers/sub-contractor comply with the company safety regulation

Organise and Proper Handover the Completion Project

1. Ensure proper accurate handover of construction documents to the Clients

2. Ensure the Sub-contractor submit the proper handover documents to the company

3. Ensure the project deliver by us and sub-contractor to client(s) on schedule with "0" defect

Manage a Team with Good Technical Knowledge

1. Build and train a competent Supervisor, Leadmen and worker team

As work roles evolve over time, company may change your job scope, based on organizational needs and employee abilities, from time to time.

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Key Roles and Responsibilities

• Perform front end engineering design (FEED) and basic design for Electrical system of renewable energy projects, e.g. Solar (Roof top, ground mounted and floating), Battery Energy Storage (BESS) projects, Wind projects and mix of Solar, BESS, Wind projects including configuration study.
• Provide technical expertise to develop electrical engineering design deliverables (e.g. SLDs, Layouts, equipment list, load list, datasheets, specifications, electrical protection systems and sizing calculation etc.) for Solar, BESS, Wind, and other projects for Electrical system.
• Review inter-disciplines design/ engineering with consideration for safety, interfacing, quality, performance, reliability, flexibility of operation with optimal project and life cycle cost.
• Support Project-In-charge for over-seeing contractors / vendors for on-site electrical works and accountable for updated and accurate records of all electrical systems
• Conduct engineering activities during business or project development including but not limited to pre-feasibility/ feasibility studies, technical due diligence, electrical layouts, electrical schematics, protection coordination, review of power system studies (short circuit, load flow, earthing, stability etc.)
• Preparation of technical proposal to customer, project / EPC scoping strategy, vendor selection (bid review, technical clarification and bid evaluation), carried out cost estimation, determine LCOE, and all related technical support a etc.
• Stay up to date with advancements in Electrical, Solar, BESS, Wind power technology, Evaluation of new technology and innovative solutions e.g. competitive alternatives to SF6 insulated GIS, etc.
• Participate in engineering activities during project execution including but not limited to preparation of Scope of Work / Design Memorandum / Minimum Functional Specification, tender review on technical proposals and clarifications, attend site queries and site installation issues that related to design, pre-commissioning, testing and commissioning, PSSR etc.
• Attend FAT/SAT and Functional testing to ensure electrical equipment is meeting the design intent & project premise.
• Participate in HAZOP, QRA, EIA, SPD studies. Liaise with LEW for system studies and other regulatory requirements.
• Review and approval of detailed design documents submitted by Contractors and ensure compliance with Engineering Standards, company & industry best practices.
• Establish system and documentation for company engineering standards & specification, ITP, approved vendor/manufacturer list, material specifications, discipline’s schedule of rates and cost estimate template, engineering checklists etc.
• Ensure all activities carried out are in full compliance to all regulatory and authority requirement of Singapore and other SEA countries (Philippines, Malaysia, Vietnam etc.) i.e. Energy Market Authority Act, Electricity Act and local Code of Practices during execution of Engineering Design.

Qualifications & Experience

• Bachelor’s degree in electrical engineering
• At least 8-15 years of experience in Solar and BESS Electrical design, energy business related engineering management and project management (engineering and construction).
• Well verse of Solar resource assessment, PVsyst software, BESS sizing techniques, software and tools (Homer etc.).
• Experience in other renewable energy projects, especially Wind, CCU is preferred.
• Knowledge of Power system studies software (ETAP etc) is desirable.
• Have a passion and experience in areas related to energy transition and infrastructure

Skills/competencies & Preferred Characteristics

• Demonstrate critical thinking, positive attitude, teamwork, analytical, communication and leadership skills.
• Strong self-motivation and work ethic, flexible and thrives under pressure.
• Excellent project management and organizational skills.

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Responsibilities：

1. Responsible for pre-sales support of products and problem solving solutions, assisting sales to research and analyze customer demand, formulating technical proposal and tender, expounding on technical solutions, demonstrating products and answering technical inquiries.

2. Assist sales to promote and sell products and problem solving solutions.

3. Collect and feed back customer’s opinions on products and technology to the technical department. Deepen solutions according to customer’s demand, and assist technical engineers to implement solutions.

4. Conduct relevant technical training for internal sales and pre-sales as well as external partners.

Requirements：

1. Bachelor degree or above; Computer, automatization or logistics majors are preferred.

2. Have three years and above experience in logistics automation, e-commerce or ERP-WMS; Experience in solution design, technical consultation, and project bidding is preferred.

3. Capable of analyzing, guiding demand and designing solutions in logistics, manufacturing storage, e-commerce and related IT systems.

4. Problem solving oriented , honest, pragmatic and responsible, highly enthusiastic and a team player.

5. Good communication and presentation skills, English can be used as working language; Proficiency in two or more foreign languages is preferred.

6. Willing to travel a lot.

...

• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programs.
• Liaise with Consultants on technical issues and coordinate the site activities with subcontractors.
• Maintain quality standards and carry out site inspections.
• Ensure compliance with EHS requirements, regulations, and best practices throughout the project lifecycle.
• To supervise and ensure works are in accordance to the contract drawings and specifications.
• Ensure site safety and proper execution of site work procedure on site
• Plan the sequences of the construction operations following the Project Quality Plan.

Requirements

• Minimum 5 years Local Experience in Construction Industry;
• Degree in Civil Engineering or Construction related field;
• Able to work independently, a strong team player and to handle fast paced projects.
• Good interpersonal, written and verbal communication skills for collaboration with stakeholders across all levels.
• Independent, diligent and highly motivated with excellent team spirit