Responsibilities:

• Ensure proper risk assessment is in place to provide a safe working environment for workforce by periodically reviewing risks and hazards associated to workplace, executing control measures and communicate effectively to workforce.
• Respond to technical queries from subordinates to account for timely project completion by consulting relevant parties such as mould loft and engineering department for practical solution.
• Monitor quality of welding and NDT completion on end products to prevent carry over work to next station by preforming on site checks and reviewing NDT records.
• Set daily targets for workforce to achieve to account for timely project completion by monitoring daily output and conducting daily reviews of the results.
• Study production drawings to spot possible mistakes or possible fabrication issues to ensure production schedule can be met without unexpected delays by detailed discussion and review of drawings with technical staffs.
• Prepare weekly report on progress and KPI to ensure project progress in on track by monitoring block status and compiling production progress data from site.
• Identify bottlenecks to ensure no unexpected delays to project progress by conducting meetings with subordinates, analyzing weekly reports and formulate optimal production flows for any issues identified.
• Review manpower allocation and effectiveness to ensure project progress is on track by analyzing daily and weekly KPI against progress, discussing with managers should additional manpower or reallocation of manpower is needed.
• Performs supervision on site to ensure fabrication work have been safely executed accordingly to drawings and quality requirements to account for timely project completion by checks on the floor, communicating and getting feedback from workforce.
• Identify the production capacity and plan station schedule to ensure accordance to sequence by comparing to hullshop master schedule and hullshop historical productivity data.
• Set the KPI and manpower allocation for each station to achieve required schedule by analyzing workforce and facilities capabilities and historical date and previous projects.
• Study project requirements, identify any gap that exists with current hullshop practices and propose recommendations to close the gaps to ensure no unexpected delays to project schedule by conducting reviews and meetings with QA and QC personnel.
• Ensure Standard Operation Procedures (SOP) in place so that work can be performed according to project requirements by communicating SOP's to workforce.
• Determine block fabrication sequence to ensure most effective way to fabricate blocks by analyzing drawing and 3D model and holding discussion with production and mould loft team.
• Ensure proper lifting plan is available for blocks to account for safe block lifting by advising engineering lifting team on block fabrication method in advance.
• Review subordinates competency to ensure effectiveness in performing work by analyzing productivity data, non conformance received and feedback from QA, QC and clients.
• Take active role in Incident Investigation to find root cause and proper preventive measures are implemented by conducting interviews with injured person(s) and witnesses, analyzing accident scenes and other investigative processes together with HSE Team.
• Propose training required by workforce to prevent shortfall in certain roles by compiling workforce skills and comparing with production requirements.
• Participate in Safety Innovation Programs by actively contributing to department Safety Innovation Team

JOB REQUIREMENTS

Requirements:

• Degree in Engineering
• At least 3 years of relevant working experience, preferably in marine/ offshore industry
• Knowledge of functional and operational requirements related to design of all types of ships and offshore vessels
• Knowledge and experience of his engineering field
• Knowledge of regulatory and class requirements
• Able to read and understand engineering drawings
• Possess good communication and interpersonal skills
• Possess supervisory skill to coach and motivate staff
• Able to work in a team
• Proficient in Microsoft Office and engineering design software (e.g. Tribon, GEMS)

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Roles & Responsibilities

Electrical Supervisor Responsibilities:

• Plan and schedule projects
• Estimate the time and materials needed to complete projects
• Maintain records and documentation relating to the ongoing completion of projects
• Supervise electricians and aircon wokers as they work, providing guidance and instruction as needed
• Ensure that work complies with all safety requirements
• Perform electrician tasks as needed
• Initiative & Innovative needed

Electrical Supervisor Requirements:

• Diploma / Higher Diploma in electrical / Aircon or a related field experience is strongly preferred
• Aircon knowladge is advandage
• Previous experience as an electrical supervisor is highly beneficial
• In-depth knowledge of the electrical industry
• Strong leadership skills
• Familiarity with relevant state and federal codes and safety requirements
• Basic technical literacy

• Diploma / Degree in Civil Construction engineering industry.
• At leat 1 year experience in construction & 2 years MRT experience
• Site engineer with minimum of 2 years’ experience in underground/tunnelling projects
• Must have experience in diaphragm wall and bored-piling

Client: A1 Main Contractor
Location: Hougang Area
Working Hrs: 7.30am – 6pm, 7.30am -12pm (5.5 days week / 6 days)
Salary: $4000 – $5000, Depending on Qualification, Experience & Capability.

Annual Leave: 14 days + Performance Bonus

TO APPLY:

Send in your detailed resume to [email protected] or Whatsapp 89101675

Subject: Site Engineer / Senior Engineer > MRT Project

1) Use MS Word format. (No PDF File*)
2) BioData
3) State your Expected Salary, Current & Last Drawn salary for “ALL” previous employers
4) The Notice Required and Availability Date
5) State all projects handled eg. MRT project and duration

** Our Consultants will contact you for an interview.

1. Plan, organise and manage WHS activities within the sites to cultivate good EHS practices.
2. Perform Risk Assessment and draft safework procedures with clients for submission before start of project
3. Conduct induction for new workers on in-house safety regulations
4. Conduct Risk Assessment and safework procedures briefing to the workers
5. Site inspection and conduct safety meeting
6. Report and investigate accidents and incidents at sites
7. Participate in internal audits and review of Safety Management System
8. Maintain HSE controls and process within Company’s policies and government’s regulations
9. Accident investigation and submit I-Report when necessary
10. Develop Emergency Response Plan for audits
11.Prepare forms to be implemented in the workplace such as safety checklist, RA forms etc.
12. Candidate must possess at least a post secondary Diploma with at least 6 years relevant construction project safety experience in singapore
13. must possess professional knowledge in Law and regulations (WSH Act and Environment)

We are seeking a highly skilled and motivated Service Engineer to join our team. The ideal candidate will be responsible for providing technical expertise, performing maintenance, and delivering support services to ensure the efficient operation of equipment and systems.

• Designing and developing electrical systems for marine vessels
• ⁠Installing and commissioning electrical systems on ships
• Supervising the work of marine engine technicians
• Inspecting and testing electrical systems and equipment
• Maintaining and repairing electrical systems and equipment
• Designing tray routes and electrical panel positions
• Creating single-line diagrams of lighting and other electrical panels
• ⁠Supervising the installation, cabling, and termination of electrical equipment
• Independently testing and Commissioning electrical panels
• Presenting surveys of electrical systems to relevant authorities

About TUMCREATE

TUMCREATE is a multidisciplinary research platform of the Technical University Munich (TUM) at the Singapore Campus for Research Excellence and Technological Enterprise (CREATE). We are joining forces with universities, public agencies, and industry for the advancement of future technologies.

A new multi-disciplinary project named “Centre for Energy & Emissions Modelling (CE2M) Phase 2” hosted by A*Star with TUMCREATE as one of their partners has been launched. The overall goal of this project is to provide policymakers with a toolbox to explore pathways to “net zero” in Singapore. For this purpose, an existing model integration framework shall be enhanced through a systems of system modelling & simulation approach. Different models will be coupled using interfaces that enable them to communicate with one another.

Please visit www.tum-create.edu.sgfor more information about TUMCREATE.

Objective of the position:

We are looking for an experienced Software Engineer who will work on building interfaces between models and to expand existing models to facilitate model coupling. This is a 24-month fixed term contract with the possibility of extension.

Job Responsibilities:

• Familiarise with and review existing models developed by the project partners.
• Identify weak points of the models, particularly with regards to interfacing them with other models.
• Define and implement interfaces between the models.
• Contribute to the development of a system-of-systems model that includes all models.
• Presentation of the results in at least one international scientific journal.

Job Requirements:

• PhD or Master’s degree in Electrical Engineering, Computer Science or a related field from a reputable university.
• Knowledge of software development and versioning systems.
• Programming knowledge of Python.
• Experience in software modelling, preferably in the field of energy and power systems.
• Knowledge of energy and power systems is preferable.
• Knowledge of the tools URBS and TIMES is a plus.
• Ability to interact with other researchers and define a working structure.
• Good English writing and communication skills.
• Good interpersonal skills for working in an international research team with people of different backgrounds.

What TUM CREATE offers you:

• Competitive salary that commensurate with experience
• Medical insurance
• Good amount of leave/vacation days
• Vibrant, modern and positive working environment in Singapore
• Campus-sited office location with a host of facilities
• In-building perks including gym, game room and coffee room

Applications:

Please send your application including cover letter and CV to [email protected].

We look forward to receiving your application.

Construction operations encompass the critical processes that turn plans into finished projects. They involve coordinating every stage of construction, from preparing the site to the final handoff. These operations ensure everything runs smoothly by aligning schedules, managing resources, and addressing challenges as they arise.

Engaging in construction operations means orchestrating a variety of tasks, including sourcing materials, adhering to safety protocols, and employing modern technologies to enhance efficiency. Tools like Building Information Modeling (BIM) help with precise planning, while on-site monitoring technologies ensure progress stays on track. Success here is about preparation and flexibility, balancing the needs of the project with unforeseen changes.

Ultimately, construction operations are about managing both tasks and teams. Bringing together project leaders, subcontractors, and stakeholders requires clear communication and a commitment to quality. The goal is always to deliver a project that meets expectations, stays within budget, and achieves deadlines while maintaining safety and efficiency at every step

1. Responsible for creating test plans or any other QA documents in accordance with the Company’s requirements.
2. Must have worked on tools like Selenium for front end testing and mobile testing
3. Strong technical skills with hands on experience in programming with Java and/or VBScript
4. Write clean, high-quality scripts that test product functionality automatically.
5. Conduct various tests for systems, networks, applications, databases, software.
6. Identify specific cases that should be automated and discuss them with manual QA engineers.
7. Develop the best automation solutions based on the requirements.
8. Collaborate with cross-functional teams to find ways on how automation can improve the workflow.
9. Troubleshooting automation software and finalizing system procedures.
10. Develop/maintain automation test scripts.
11. Execute and manage automation test cases and results.
12. Any other ancillary tasks or works as and when requested and assigned by the Company

Qualifications

1. Bachelor’s degree in computer science, software engineering, or a similar field
2. Good Knowledge of SDLC and agile processes, test methodology and different types of testing
3. Strong technical skills with hands on experience in programming with Java and/or VBScript
4. Excellent analytical skills
5. Strong attention to detail
6. Excellent communication skills and able to work independently and with automation team
7. Minimum of 3-5 years of experience in test automation

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

We are seeking a Research Engineer to join a university-level research centre collaborating with industry. The position is for one year, renewable subject to satisfactory performance. Successful candidates will be involved in a project that is related to generative design.

Key Responsibilities:

• Deploy, optimize, and integrate generative AI models onto edge devices, ensuring efficient performance in real-world applications.
• Develop robust pipelines and frameworks for AI model inference on edge platforms, considering hardware constraints and latency requirements.
• Optimize AI models for power efficiency, memory footprint, and computational speed, utilizing techniques like quantization, pruning, and model distillation.
• Conduct thorough testing, debugging, and performance validation of deployed models under various real-world conditions.
• Work closely with researchers, data scientists, and software engineers to bridge the gap between research prototypes and deployable solutions.

Job Requirements:

• Master’s degree or above in Computer Science, Electrical Engineering, Artificial Intelligence, or a related discipline.
• Bachelor’s degree holders with relevant industry experience are also encouraged to apply.
• Strong background in machine learning and deep learning, particularly in generative AI models.
• Proficiency with relevant programming languages and frameworks such as Go, Python, C++, and CUDA.

Additional Criteria:

• Industrial experience in relevant areas such as AI deployment, edge computing, or R&D is desirable.
• Ability to work independently with limited supervision and collaborate effectively within a multidisciplinary team.
• Strong problem-solving skills and the ability to adapt to hardware constraints and real-world challenges.
• Familiarity with edge computing platforms (e.g., NVIDIA Jetson, ARM Cortex, and mobile chipsets) and related tools.

We regret that only shortlisted candidates will be notified.

Roles & Responsibilities

• Reading blueprints or looking at sketches to determine how to install rebar or mesh
• Figuring out the quantity, size, and shapes of reinforcing rods and determining where to place them
• Preparing rebar and mesh for installation using metal shears, hacksaws, and torches
• Bending or welding rebar together
• Installing cables
• Using pliers to tie wire around rods to fasten them together
• Positioning and securing rods, cables, mesh, or rebar in concrete forms

[Job ID: 764003]

Responsibilities:

• Present, promote, and sell products/services to both existing and prospective customers in the cleanroom, biotechnology, and pharmaceutical production sectors.
• Develop and implement strategic sales plans for assigned products and agencies.
• Engage with potential customers to understand their needs and recommend equipment, products, services, or solutions that best address those needs.
• Analyze the market potential within the territory, track sales performance, and generate status reports.
• Build strong technical expertise in products and applications to effectively support and engage prospects and clients.
• Cultivate and maintain strong relationships with customers, expanding the product portfolio for the team.

Requirements:

• Minimum of 3 years of experience in a technical sales role within related industries (e.g., healthcare, cleanroom, pharmaceutical, industrial equipment).
• Experience in preparing tenders and handling requests for quotations (RFQs) and costing.
• Positive attitude, with a strong willingness to learn and recognize new opportunities.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference: https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Sandy Ng Mei Qi

EA Personnel Registration Number: R24125475

EA License No.: 07C5771

• Applies various finishes to buildings, rooms, structures including primers or sealers.
• Prepares,cleans and tapes all jobsites.
• Able to work on hot days under sun.
• Mixes colors or oils to obtain desired color or consistency.
• Removes old paint coating, if necessary.
• Moves necessary materials around jobsite as assigned.
• Cleans up worksite debris.Capable of receiving and following instructions and communicating with foriegn workers.
• Able to do overtime.
• Able to work on public holidays.
• Able to read and adhere to labels, safety warnings, and guidelines.
• Able to work hard.
• Attentive to detail and always alert to ensure safety,

Electrical PLC Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Use Siemens S7-400 PLC to do the HVAC System PLC program. Experience in CPU Redundancy, Modbus Communication Redundancy.
8. Use S7-1200 PLC to do the HVAC Control System PLC program
9. Use Siemens HMI software to do the Touch Screen Program.
10. Fully understood HVAC System D & ID, P & ID.
11. Marine and Offshore commissioning experience are required.
12. Sometimes will go to site trouble shooting.
13. Contact with client about the project requirement.
14. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Electrical Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Fully Understand PLC control system.
8. Fully understood HVAC System D & ID, P & ID.
9. Marine and Offshore commissioning experience are required.
10. Sometimes will go to site for trouble shooting.
11. Contact with client about the project requirement.
12. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Job Responsibilities:

• Responsible for the management of Site Reliability Engineering, have hands-on knowledge on manage & troubleshot server, network and applications;
• Responsible for the deployment and daily monitoring of the company's business systems to ensure the normal operation and emergency response;
• Provide in-depth understanding of the operation and maintenance architecture, good at architecture design, performance optimization, platform security; Responsible for the improvement of the operation and maintenance team skills, to ensure the professional level of the operation and maintenance team.
• Establish and improve standardized operation systems for DevOps team. Use a sound management strategies and security strategies to ensure the quality of operation and maintenance;

Job Requirements:

• Familiar with automation deployment, proficient in how to build the most of popular monitoring system in the market. SVN/Git version control system and proficient in CICD configuration;
• Hands-on knowledge in Nginx configuration, Load balancer (SLB) configuration. Familiar with Node.js running environment.
• Skilled in managing Linux systems and security, with experience in operation and maintenance of large websites or web application platforms;
• Understand common knowledge about the network, familiar with firewall, VPN, DHCP, DNS and other network technologies, familiar with high availability/load balancing technology;
• High sense of responsibility, strong ability to analyze and eliminate faults, good at learning at work, able to withstand work stress;
• Understand the penetration test, have experience in safe operation and maintenance, and have working experience in AZURE, AWS or Google Cloud platforms;
• Required Skill(s): redis, zabbix, elasticsearch,KBS,HAProxy,Jenkins
• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Computer/Telecommunication), Engineering (Electrical/Electronic), Computer Science/Information Technology or equivalent.
• Required language(s): English, Mandarin (Good communication skills in Mandarin language to handle Mandarin speaking customers’ enquires & conduct trouble shooting based on customers’ feedback)
• At least 1 year of working experience in the related field is required for junior position. Shift work may be required.
• Preferably Senior Executive specialized in IT/Computer - Network/System/Database Admin or equivalent.

What we offer:

• Attractive rewards for long-term service staff
• Energetic and friendly working environment (flexible working hours, quarterly events, staff birthday celebration and etc.)
• Medical insurance

The L1 System Engineer is responsible for:

• To provide 24 x 7 support for Data Center running on 12 hours shift
• Assisting the Customer in the verification, isolation and/or provision of a temporary work around for the incident/problem logged.
• Resolving the incident/problem onsite.
• Escalating unsolvable problems and service requests to the System and/or Software Engineer and reporting the escalation to the Project Manager.
• Generating the relevant administrative records and reports.
• Introducing and integrating new technologies into existing environments.
• Applying operating system updates, patches, and configuration changes.
• Adding, removing, or updating user account information, resetting passwords, etc.
• Answering technical queries
• Maintaining the configuration of the system.
• To implement Service Request and Change Request
• Contacting OEM/Vendor for technical support

Requirements:

• Diploma / Degree in Computer Science, Computer Engineering, Information Technology
• Preferably with Microsoft Certification and/or ITIL certification.
• Good Knowledge of following products will be advantageous:
• -Linux
• -Unix
• -Active Directory/DNS
• -Microsoft Azure Stack
• -Microsoft Windows 2008-2016
• -Commvault Backup and Recovery
• -Symantec Endpoint Protection
• ITIL certification will be an advantage.

Interested candidates, please forward a detailed resume and email to career{a}tempserv.com.sg

Tempserv Pte Ltd

License No: 06C3745

Attention: Wee Wan Qi / EA Personnel No: R22109446

Involve in one or more teams in supporting and maintaining systems, to ensure that they are up and running smoothly:

• Report to Project Leads/Project Engineers in delivering of projects
• Managing of vendors
• Performing project administration
• Performing inventory checks
• Performing equipment testing
• Sourcing for vendors
• Procuring of project equipment, parts and components
• Compiling of materials for Projects (User Manuals/Delivery Note/HOTO etc.)
• Supervising Vendors/Contractors to ensure work is done according to specifications
• Extracting and compiling data for analysis
• Installing and setting up of project equipment (e.g. Comms, IT, Network, etc.)
• Driver (e.g. transporting project equipment to/fro sites, sending project leads/engineers to/fro sites, etc.)
• Require travelling to various sites for work.
• Operating and thrive in a dynamic work environment where you are required to liaise with both internal and external stakeholders.

Requirements:

• Minimum academic qualification of Diploma in Electronics/Mechatronics/Computer Engineering or equivalent
• Minimum of 2-3-year experience in a similar engineering-related capacity. Fresh grads may also be considered.
• Positive work ethics and team player
• Takes ownership of responsibilities
• Thrive in multi-disciplinary and cross-functional environments
• Able to work effectively in an indoor and outdoor environment
• Preferably, with some experience in System-Level Maintenance in the following disciplines (Radio Communications, basic networking skills, computer/servers, embedded systems and/or UPS). Other Engineering-related experience maybe considered.
• Evident in writing, verbal and interpersonal skills.
• Proficient in MS Office (Words, Power-point & Excel)
• Class 3 Driving License is a must.

Interested candidates, please forward a detailed resume and email to career{a}tempserv.com.sg

Tempserv Pte Ltd

License No: 06C3745

Attention: Wee Wan Qi / EA Personnel No: R22109446

Responsibilities:

• To support the Preventive Maintenance on the Comms Equipment & Accessories. (i.e. telecommunication devices)
• Must be able to perform battery replacement, Air leak Test and Functional Test and checking on Comms Accessories.

Requirements:

• Diploma / ITC / NTC-2 in Electronics and Communications Engineering or equivalent
• At least 1-2 years of related working experience in Electronics and Communications Equipment
• Team player and able to work independently.

Other Information

Good soldering skill will add an advantage

Interested candidates, please forward a detailed resume and email to career{a}tempserv.com.sg

Tempserv Pte Ltd

License No: 06C3745

Attention: Wee Wan Qi / EA Personnel No: R22109446

Infrastructure Engineer

Job Description:

• Operate, manage, and maintain VMWare ESX and HCI technologies

• Knowledge of administering Windows Server 2016, SQL 2016 and Windows Clustering technology

• Red Hat administration

• Plan, coordinate, and execute product installations, product upgrades, patch installations and hot fix installations

• Create, manage, and maintain documentation related to the managed systems and operation

• Perform hardening benchmarks adhering to defined procedure and checklist. Maintain the infrastructure in such a way that it is secure against unauthorized access.

• Deploy and deliver the project deliverables as stated in the project scopes extracted from the proposal/contract.

• Update the Infrastructure team lead on the project progress and status.

• Implement changes through Change Management Process on system components. Ensure change impact is evaluated, contingency plan and test plans are created to support the change request.

• Build, configure, and rollout new releases through Release Management Process on system components that affect operations. Organize training for new releases where necessary.

• Identify, isolate, resolve, escalate and close incident/problem ticket according to ITSM Incident/Problem Management Process.

• Ensure backup and recovery of system components is carried out, so that critical services can continue in the event of a disaster.

• Perform daily system health check

Requirements:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Computer Science/Information Technology, Engineering (Computer/Telecommunication), Engineering (Electrical/Electronic) or equivalent.

• At least 3 year(s) of working experience in the related field is required for this position would be advantageous.

• Preferably possess certifications such as Microsoft MCITP, VMWare certified professional or equivalent

• Full-Time position(s) available.

Mon to Fri 8.30am - 5.30pm

This position will be based in Singapore , reporting to procurement manager .

Expected to use their specialized knowledge to maintain an efficient procurement system to supply cost effective materials and services to support the company’s operations.

Job Responsibilities

Procurement Operations and Data Maintenance

• Support the procurement end to end function and other relevant departments and communicate any supply problems which may impact on business operations. Act as an interface between suppliers and relevant departments on purchasing processes and new projects and activities.

• Maintain system integrity of supplier’s info in the ERP system, such as items suppliers connect, purchasing agreements and supplier basic data like MOQ, order multiple, purchasers responsible and supplier maintenance.

Sourcing

• Conduct business review meetings with key stakeholders to assess risk, review future strategies, and identify potential cost down, new programs and improvement opportunities or mitigate the risk.

• Create and review opportunities on alternative materials and or suppliers to meet the business unit objectives in procurement activities and deliver best values and business savings.

• Collaborating with quality team to understand company/s needs as well as work with our existing/new suppliers to determine company strategic alignment.

SNOP

• Understand the trend of raw material / feedstock related, update the information to commercial team, provide analysis on costs, new and cost savings activities. Develop strong partnership with suppliers.

• Monitor market trends, competitor strategies and market suppliers, provide analysis on costs, new and existing and review cost to achieve savings. Establish r/s with suppliers to leverage the needs in term on tight supply situation as well as to be ahead of the market requirement.

• Contribute and communicate the impact on Procurement activities to new business initiatives and projects. Involve in Global procurement project activities.

Vendor Management

• Assess and evaluate supplier’s performance reviews, compiling data relating to supplier performance to enable evaluation.

• To audit supplier supply capability and quality standard when required. Maintain proper documentation in accordance with ISO procedures.

Job Requirements:

• Degree Holders with at least 5 years of working experience in end to end procurement related field in manufacturing environment

• At least 5 year(s) of working experience in related field preferably in petrochemical or polymers related industry

• Possess strong sourcing and negotiation skills.

• Accountable team worker, proactive, problem solving and analytical abilities.

• Strong interpersonal and communication skills to work productively and collaboratively with multi-functional teams to achieve business goals.

• Candidates with good experience in petrochemical raw material commodity price trend analysis will be at advantage

• Familiar with SnOP process would be added point

• This position required to manage overseas vendor from China

We are seeking a skilled and highly motivated SCADA Systems Engineer to join our dynamic team. The successful candidate will be responsible for designing, implementing, and maintaining SCADA systems for a variety of industrial projects. The role requires strong technical expertise in SCADA software and hardware, communication protocols, and system troubleshooting. The ideal candidate will collaborate with project managers, engineers, and other key stakeholders to ensure seamless system operations and continuous improvement.

Responsibilities:

• Design and implement SCADA systems tailored to project requirements, ensuring full functionality and performance.
• Install and configure SCADA software and hardware components, including PLCs, RTUs, and communication protocols (Modbus RTU, Modbus TCP, IEC 104, BACNET).
• Develop and maintain comprehensive system documentation such as user manuals, technical specifications, and configuration guides.
• Diagnose and resolve system malfunctions and errors, identifying root causes and providing effective solutions.
• Perform routine system upgrades and patching to maintain optimal system performance, functionality, and security.
• Conduct testing and validation procedures to ensure compliance with all project requirements and industry standards.
• Work closely with project managers, solution architects, and engineers to ensure efficient communication and successful project delivery.
• Provide technical support and training to end-users, including operators and maintenance personnel.
• Participate in initiatives to continuously improve system performance, reliability, and overall efficiency.

Requirements:

• Proven experience in SCADA system design, implementation, and ongoing maintenance.
• Strong knowledge of SCADA software and hardware components, including PLCs, RTUs, and communication protocols (Modbus RTU, Modbus TCP, IEC 104, BACNET).
• Proficiency in IoT protocols such as MQTT, HTTP/S.
• Ability to troubleshoot and diagnose system malfunctions and provide effective solutions.
• Familiarity with virtualization and containers is a plus.
• Basic understanding of networking concepts.

To apply, simply click the "Apply" button or send your updated profile to [email protected]

EA Licence No.:18S9405 / EA Reg. No.:R1330864

Percept Solutions is expanding and actively seeking talented individuals. We encourage applicants to follow Percept Solutions on LinkedIn at https://www.linkedin.com/company/percept-solutions/to stay informed about new opportunities and events.

Job Responsibilities:

• Responsible for monitoring and controlling the plant operation.
• Performs minor routine preventive maintenance and calibration of plant equipment to maintain operating efficiency.
• Work closely with maintenance team in troubleshooting and maintaining plant equipment under safety guideline.
• Starting up and shutting down process under the direction of supervisor.
• Regularly inspect equipment for any abnormalities.
• Perform other duties as assigned.

Job Requirements:

• Good interpersonal and communication skill
• A good team player with positive working attitude
• Able to commit 12hrs shift and overtime work
• Able to work in process treatment plant

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

Company’s Profile:

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for Software Engineers to join their team and contribute to their ongoing success.

Location: Ang Mo Kio/Yio Chu Kang area

Job Responsibilities:

• Design solutions that meet functional requirements.
• Develop end-to-end specifications for solution components.
• Perform testing and implementation of the solution.
• Participate in impact analysis of encountered issues.
• Contribute to continuous improvement of software development best practices in the areas of coding tools, languages and APIs, as well as software design and development processes.

Participate in UX activities such as:

• Conduct user research/interviews
• Develop user stories, storyboards to articulate current and future concepts
• Create wireframes, detailed visual mock ups and interactive prototypes
• Create style guides and digital assets for production

Requirements:

• At least 2 – 3 years’ Software Engineer experience, with strong expertise in at least of the following languages: Java, JavaScript, Python, C#, .Net.
• Good understanding of software development lifecycle processes
• Proficiency in Web Technologies such as HTML, CSS
• Diploma or Degree in any IT discipline or equivalent

Interested candidates may whatsapp your resume to 6421 4965. Only shortlisted applicants will be contacted.

Cassie Chan | R2197426

Talentsis Pte Ltd | EA No: 20C0312

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

1. To coordinate with consultants / subcontractors on the shopdrawings / samples / method statements and keep all involved parties updated of the latest changes.
2. To attend to project / technical meeting and resolve site issues with owner / consultants in order for the site progress to proceed smoothly.
3. To verify the work done on site are in accordance to the approved drawings / specifications / authority’s requirement and also ensured that the subcontractor carry out rectification for non-compliance.
4. To resolve site issues with consultants / subcontractor / supplier ASAP in order to minimise delay to the construction progress.
5. To ensure that the related documentations are updated and ready for ISO audit.
6. To cooperate with the safety department and carry out the assigned duties within the safety framework.
7. Assist site management team in project Planning & coordination.
8. Plan and schedule work sequences for construction operation.
9. Arrange and prepare documents for authorities’ submission for Conquas, RI, TOP etc.
10. To study tender / construction drawings, specifications, and contracts to understand project requirements.
11. Understanding of critical project criteria related to schedule & productivity.
12. Must be a team player and ability to work in a cross-functional team environment.
13. Strong oral and written communication skills.
14. Able to work independently, proactive and self-motivated.
15. Able to provide guidance to new staff / junior staff.
16. Minimum of 5 years of relevant experience.