As a Metrology/ Real-Time Defect Analysis (RDA) Engineer in MSB, you have the opportunity to work with a multi-functional team from different areas of the plant/ process areas to understand their tools and processes so as to create measurement recipes that can provide quick and accurate feedback on the product integrity, thus ensuring quality output. As technology advances, you will be constantly challenged with the need to innovate for newer, faster and better modes of monitoring. You will collaborate closely with vendors to explore best known methods to maintain high tool performance and embark on possible ways of cost reduction to ensure our product retains its competitiveness in the market. Additionally, you are required to work in both clean/non-clean room environment

Enable production Metro/RDA needs.

• Provide first level of support for engineering requests, recipe maintenance, tool recovery and basic troubleshooting of tool issues
• Set daily priorities and enable efficient communication.
• Schedule and perform preventive maintenance on assigned tool sets
• Ensure all Special Work Requests (SWRs) are processed correctly and in a timely manner
• Optimize tool maintenance schedules and utilization
• Resolve sampling strategy to meet business requirement

Ensure all Metro/RDA tool meet measurement and inspection standards.

• Set up tool qualification criteria, implement, supervising through SPC.
• Make decisions on how to address tools and products that are out of control for established SPC rules for both process and defect related issues
• Develop and handle projects designed to reduce cost, reduce tool measurement variability, improve availability, and find solutions to ongoing problems
• Partner with Process, Equipment Owners and vendors for equipment upgrades/enhancements to improve tool performance
• Perform periodic assessment, tool-to-tool matching and GR&R, etc. to ensure tool measurement accuracy.
• Evaluation and enable next generation tool to close metrology gaps.
• Partner with the metrology/inspection tool vendors to develop new hardware, software, and technologies.
• Perform tool evaluation and buy-off

Seek and drive methodology breakthrough to improve efficiency in metro/RDA function.

• Drive process improvement through new recipe creation that helps to provide accurate and faster feedback to the line, thereby improving the confidence level of the product.
• Participate in world-wide discussions for continuous improvement on the toolset(s) assigned across Micron sites.
• Set up processes, design and implement process monitoring, control methodologies.
• Establish business process standards, specifications and documents.
• Work with peer groups to test and vet new or continuously improve the Reaction Mechanisms and Procedures based on feedback from the end users.
• Write and publish reports that summarize projects, detection capability improvements, manufacturing productivity and cost reduction work.

Requirements:

• Bachelors in engineering/science/Statistics
• More than 2 years’ experience in Metrology/RDA in Semiconductor industry
• Knowledge of semiconductor Metrology/RDA equipment and understanding of Statistical Process Control (SPC), process control and its reaction mechanism
• Strong problem solving and critical thinking skills and able to identify root causes
• Ability to facilitate meetings and achieve cross area engagement /empower a group of people toward a common goal / work and lead team project.
• Good documentation skills with strong attention to details
• Validated strong analytical and data summary skills
• Experience in MSA (Measurement System Analysis) is an added advantage
• Experience in Python and Tableau is an added advantage
• Good communication skills

Keen on the role? Apply now!

Oversees the installation, modification, upgrade and maintenance of manufacturing equipment. Maintains current records on equipment manufacturers’ technical notices, upgrades and safety issues. Studies equipment performance and reliability. Establishes programs and solutions for increasing uptime and for equipment problems that affect the manufacturing process. Provides technical support to the manufacturing equipment repair and process engineering organizations. Defines and writes preventative maintenance schedules.

A Construction Site Supervisor is responsible for overseeing and managing the daily operations on a construction site to ensure that construction projects are completed on time, within budget, and according to quality and safety standards. This role involves coordinating various construction activities, supervising workers, ensuring compliance with regulations, and reporting progress to senior management or project managers.

Key Responsibilities:

1. Site Supervision and Coordination:Supervise and manage construction activities on-site, ensuring work is being done as per approved plans and specifications.
   Coordinate and schedule daily activities of workers, subcontractors, and equipment.
   Monitor progress to ensure that construction timelines are adhered to.
   Ensure quality control by verifying that all work meets the required standards and specifications.
   Resolve any conflicts or issues on-site related to construction activities.
   
2. Health and Safety Management:Enforce strict adherence to safety protocols and regulatory guidelines to prevent accidents and injuries.
   Conduct regular safety inspections, identify potential hazards, and take corrective actions.
   Ensure workers are equipped with proper safety gear and tools.
   
3. Resource Management:Ensure materials, tools, and equipment are available as needed on-site.
   Track inventory of construction materials and order supplies to maintain project workflow.
   Monitor and ensure efficient use of labor and materials to avoid waste.
   
4. Communication and Reporting:Serve as the primary point of contact for the construction project’s team, clients, and subcontractors.
   Report daily progress and any issues to the project manager or senior leadership.
   Provide regular updates on milestones, timelines, and project status.
   
5. Documentation and Compliance:Maintain accurate records of work progress, site inspections, and materials used.
   Ensure compliance with local building codes, zoning laws, environmental regulations, and other legal requirements.
   Ensure that permits, inspections, and approvals are obtained and completed on time.
   
6. Quality Control:Inspect work regularly to ensure adherence to quality standards.
   Identify any defects or deficiencies and ensure they are addressed promptly.
   

Requirements for Construction Site Supervisor

1. Education:A high school diploma or equivalent is typically required.
   A degree or certification in construction management, civil engineering, or a related field is highly desirable.
   
2. Experience:Proven experience (typically 3–5 years) in construction, including experience as a construction worker, foreman, or supervisor.
   Knowledge of construction processes, methods, and materials.
   
3. Technical Skills:Strong knowledge of construction tools, machinery, and materials.
   Proficiency in construction software, project management tools, and Microsoft Office Suite.
   Basic understanding of construction drawings and blueprints.
   
4. Health and Safety Certification:OSHA (Occupational Safety and Health Administration) certification or equivalent safety training is often required.
   First Aid/CPR certification may be required depending on local regulations.
   
5. Leadership and Communication Skills:Strong leadership abilities to supervise and guide workers.
   Excellent communication and interpersonal skills to manage relationships with subcontractors, workers, and clients.
   Ability to resolve conflicts effectively and maintain a positive work environment.
   
6. Problem Solving and Decision Making:Ability to identify problems and develop practical solutions in a timely manner.
   Quick decision-making skills, especially in challenging or time-sensitive situations.
   
7. Physical Fitness:Ability to work in physically demanding conditions, including standing, lifting, or working in outdoor environments.
   
8. Attention to Detail:Strong attention to detail to ensure that all aspects of the construction project meet quality standards and regulations.
   
9. Project Management Skills:Experience with scheduling and managing time effectively to ensure deadlines are met.
   Budget management skills to ensure the project stays within budget.
   

By meeting these qualifications and fulfilling these responsibilities, a Construction Site Supervisor can successfully manage the on-site construction process, ensuring smooth operations, quality outcomes, and adherence to timelines and safety standards.

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description
Responsibilities:
Control & maintain the safe and smooth progress of building work
Supervise & coordinate the activities at project site
Ensure the deadline for completing work is met and within budget
Requirements:
Diploma, Advanced/Higher/Graduate Diploma in Building Management or equivalent is better
Minimum 3-Years Site Experience
Candidates with long time working experience will be considered for Site Manager position prior
Good communicate skills
Other duties assigned by Director

Responsibilities and Tasks
• Provide engineering study is to include good design practice for state-of-the-art system designs, system capacity and capability analysis, planning for future requirements, as well as code compliance.
• Maintain engineering data bases in support of capacity tracking, capital equipment facilitation, and cash flow project management for assigned systems/areas.
• Provide support for start-up of new equipment and ensure that all equipment will properly interface to other mechanical and electrical systems.
• Specify critical components for design projects and is responsible for assuring designs meet all applicable codes and regulations. The applicable code review and analysis utilizing (but not limited to): IFC, IBC, NEC, NFPA, FM, CGA and Semi standards. This requires continual review and analysis of new and existing equipment, applications, and technology.
• Perform engineering study on emerging facilities technologies to support cutting edge semiconductor processes.
• Participate in mid to long term infrastructure planning for facilities in support of the overall company plan.
• Work with in-house TGCM contractor and ensure chemical and Gas Delivery system running smoothly.
• Review and improve Operation and Maintenance SOP and RA.
• Respond to system issues. Perform Trouble Shooting with in-house TGCM contactors and OEMs.
• Verify all works done by Chemical and Gas section are in accordance with company safety guidelines;
ensure safety features are engineered into designs; and maintain good communication with other engineering disciplines and customers throughout the organization.
• All team members are required to complete their learning items within the stipulated time frame.

For business process and/or QMS component that one is responsible or accountable for:
a. ensuring the QMS/business process that is effective and conforms to requirements.
b. ensuring that the processes are delivering their intended outputs.
c. reporting on QMS/business process performance and opportunities for improvement to management.
d. ensuring the promotion of internal and external customer focus throughout the organization.
e. ensuring the maintenance of the integrity of the QMS/ business process when changes are planned and implemented.
f. ensuring customer requirements are met.

• Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws
and regulations.
• Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings.
• Prepares bid sheets and contracts for construction and facilities acquisition.
• Reviews and estimates design costs including equipment, installation, labor, materials,preparation and other related costs.
• Inspects construction and installation progress for conformance to established drawings, specifications, and schedules.
• Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Education

• Bachelor’s degree in Chemical Engineering or equivalent discipline.

Skills, Knowledge and Abilities

• Good team work and collaboration

• Excellent communication and presentation skills

• Strong problem solving and analytical skills

• Independent and able to work on own initiative

• Good organizational skills and ability to prioritize and schedule workload

• Good knowledge of Microsoft Office

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Responsibilities and Tasks

• Provide engineering study is to include good design practice for state-of-the-art system designs, system capacity and capability analysis, planning for future requirements, as well as code compliance.
• Maintain engineering data bases in support of capacity tracking, capital equipment facilitation, and cash flow project management for assigned systems/areas.
• Provide support for start-up of new equipment and ensure that all equipment will properly interface to other mechanical and electrical systems.
• Specify critical components for design projects and is responsible for assuring designs meet all applicable codes and regulations. The applicable code review and analysis utilizing (but not limited to): IFC, IBC, NEC, NFPA, FM, CGA and Semi standards. This requires continual review and analysis of new and existing equipment, applications, and technology.
• Perform engineering study on emerging facilities technologies to support cutting edge semiconductor processes.
• Participate in mid to long term infrastructure planning for facilities in support of the overall company plan.
• Work with in-house TGCM contractor and ensure chemical and Gas Delivery system running smoothly.
• Review and improve Operation and Maintenance SOP and RA.
• Respond to system issues. Perform Trouble Shooting with in-house TGCM contactors and OEMs.
• Verify all works done by Chemical and Gas section are in accordance with company safety guidelines; ensure safety features are engineered into designs; and maintain good communication with other engineering disciplines and customers throughout the organization.
• All team members are required to complete their learning items within the stipulated time frame.

For business process and/or QMS component that one is responsible or accountable for:
a. ensuring the QMS/business process that is effective and conforms to requirements.
b. ensuring that the processes are delivering their intended outputs.
c. reporting on QMS/business process performance and opportunities for improvement to management.
d. ensuring the promotion of internal and external customer focus throughout the organization.
e. ensuring the maintenance of the integrity of the QMS/ business process when changes are planned and implemented.
f. ensuring customer requirements are met.

• Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations.

• Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings.

• Prepares bid sheets and contracts for construction and facilities acquisition.
Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs.

• Inspects construction and installation progress for conformance to established drawings, specifications, and schedules.

• Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Education

• Bachelor’s degree in Chemical Engineering or equivalent discipline.

Skills, Knowledge and Abilities

​​ 3 to 5 years experience in relevant fields of Chemical and Gas system

• Good team work and collaboration

• Excellent communication and presentation skills

• Strong problem solving and analytical skills

• Independent and able to work on own initiative

• Good organizational skills and ability to prioritize and schedule workload

• Good knowledge of Microsoft Office applications

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Responsibilities:

• Execution of Contracts & Installation progress
• Liaise with Client/Consultant/contractors to ensure efficient and timely delivery of assignment.
• Report and monitor of progress of project to Project Manager.
• Supervise works are in accordance to the contract drawings and specifications.
• Prepare method statement, shop drawings, installations / T&C check sheets, work progress report and other relevant documents for M&E related works with project teams.
• Coordinate with subcontractors and consultants on preparation and submission of shop drawings.
• Coordinate / prepare technical submissions with suppliers / subcontractors.
• Assist negotiate on procure materials, equipment and labour in accordance to budget.
• Meeting with various stakeholders to resolve technical / site issues.
• Work with stakeholders on shop drawings / equipment submissions, inspections, testing requirements and commissioning.

Requirements:

• Diploma/Degree in Electrical / Mechanical Engineering or equivalent.
• Minimum 3 years’ experience in construction industry.
• Experience in working at Data Center or in DFMA.
• Familiar with VAV / VRV / cooling tower / Chillers / chilled water pipe / A&A works.
• Familiar with retrofit / renovation / lighting control / BMS.

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang
EA Personnel No: R21102570
EA License No: 23C1894

As a Central PIE Yield Engineer / Senior Engineer / Principal Engineer at Micron Technology, Inc., you will be responsible for providing leadership to the global Micron network to drive yield, product quality improvement, new product introduction (NPI) through technical expertise, business process management and project execution.

This role needs to centralize the project information, including achievements, design requirements and testing difficulties from multiple departments located in Japan, Taiwan, Singapore, US; and drive the project to meet specs within defined tight schedule.

Responsibilities and Tasks

• Promote worldwide alignment for improved benchmark performance and efficiency gains through global project management and execution, network BKM leveraging and enhancement, and business process creation and re-engineering.
• Drives yield breakthroughs by understanding the comprehensive test flow across steps, testing conditions, product design/operation and propose an effective solution for yield versus reliability requirements.
• Foster innovation to solve yield issues with the help of generating ideas from characterizing the device fail-modes using the deeper expertise in device architecture, physics, and available testing knobs.
• Lead a multi-functional team to build frontiers in the areas of yield improvement by demonstrating the knowledge of test flow, device, bench characterization, fab process and technologies.
• Strong collaboration with Product, Test, Quality and Fab Engineering to develop best in class process, BKMs and work towards alignment across fabs, tech-nodes and technologies to achieve benchmark yield performance.
• Maintain and improve knowledge and technical expertise, explore innovation opportunities with critical thinking and detailed approach.
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Fab, Technology and Development, Product, Test and Quality Engineering.
• Communicate and respond to issues in a timely manner.
• Demonstrate ability to give effective presentations to both small and large groups on project updates and new initiative proposals.
• Periodically follow up with manager to ensure all type of goals are met and get assistance to remove obstacles.
• Travel to Micron Fab locations as necessary for face-to-face work.

Requirements

• Bachelor’s / Masters / PhD in Electrical Engineering, Microelectronics, Physics, or related field of study.
• Knowledge in Semiconductor Device Physics, DRAM/NAND/Logic product operations, parametric/electrical test, and probe yield.
• Experience in Product, Test, Yield, Design Engineering will be added advantage.
• Experience on DRAM High Bandwidth Memory will be a plus to this job position.
• Good data analysis, debugging, problem solving, reporting and presentation skills.
• Good multi-tasking, verbal, and written communication skills.
• Strong interpersonal skills and customer/co-worker relationships. Validated teamwork skills with a strong focus on developing good team dynamics.
• Good organizational capabilities and ability to work effectively with minimal direction.
• Intermediate to advanced PC skills including Microsoft Office.
• Ability to be flexible with job responsibilities and take the initiative to assume added responsibilities.

Maximizes yield by working on tools, the process, or wafer fabrication recipes. Troubleshoots wafer fabrication problems and performs root cause analysis. Works with other process areas to understand and control process deviations. Long-term investigation of defect issues may require extensive work with shift engineering and other functional areas. Evaluates products to ensure they meet the required design and performance specifications. Conducts research to assess process adjustment requirements and recommends process improvements or equipment changes needed to efficiently manufacture new product or part types.

Our client provides advanced instruments and systems designed for high performance across various industries.

• Connect with prospective clients to provide tailored semiconductor solutions.
• Manage the entire sales process, from prospecting to after-sales support.
• Liaise with global teams and R&D to tailor solutions to customer needs.
• Drive growth by exploring industry trends and opportunities in the SEA market.
  Foster and sustain strong client partnerships.

Requirements:

• Degree in Materials Science or equivalent.
• At least 2 years of sales experience in the Metrology/Scientific Industry.
• Good understanding of semiconductor processes for laboratory equipment uses for failure analysis, quality control and metrology equipment for thin film.
• Excellent communication, negotiation, and customer relationship skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Objective:

• Work closely with manufacturers, Designer, and Engineers to implement audio visual and video conferencing solutions in accordance to company’s standards and best practices to meet customer’s requirements

Core Responsibilities:

• System configuration, Testing & Commissioning for Pro-Audio solution for large Venue and corporate meeting room that need integration with other Audio Visual and Videoconferencing solution.
• Conduct end user trainings to end users on how to use the Solution(s) implemented.
• Work closely with in house AV Designers and Engineers from different manufactures like Martin Audio, EV, D&B, BOSE, Samsung, Crestron, Extron, Poly, Logitech, etc to implement full integrated solutions for venues like meeting room, lecture room, experience centre, command centre, auditorium, ballroom, etc

Education Qualification:

• ITE/ Diploma in IT/Engineering/Audio Visual

Optional Certification

• Technical audio certification from renowned audio institution or manufacturer
• Dante Level 1 & 2, Cisco CCNT, CCNA
• Crestron CTI-P101, CTI-P201, Extron Control Professional (ECP), Extron Authorized Programmer (EAP)
• Kramer Control System Designer (301), Kramer Control System Programmer (302)

Experience:

Mandate

• Must have minimum 2 years of experience in System configuration, Testing & Commissioning for Pro-Audio solution that includes all of such equipment: Microphone, Mixing console, Digital Sound Processor (DSP), Amplifier, Speaker.
• Must have min 2 years in DSP programming.

Good to have

• Experience in some of the products like Videowall, LED & LCD Display, videoconferencing, Audio Visual Switches.
• Experience in similar renowned AV brands like Martin Audio, EV, D&B, BOSE, JBL, Tannoy, etc
• Experience in Crestron, Extron, AMX, Kramer automation programming will be an added advantage

Opportunity

1. Acquiring wide and in-depth technical knowledge from renowned manufacturer products
2. Engagement with end users and manufacturers to further enhance communication skills
3. Acquiring skills through Training with Seniors and manufacturers
4. Job rotation will be given for excellent performance.

• Marine Service Engineer
• Office location : Boon Lay Way
• Working Location: On board ship
• Working days: 5 days (Mon- Friday)
• Working hours : 8am - 5pm
• Salary : $2,000-$2,800 basic + OT + Allowances (Gross Salary $3,000 - $4,000)

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

• Conduct periodic inspections, repair, service and maintenance of marine equipment to ensure reliable
  operation.
• Collaborate with clients and superintendents to deliver quality services efficiently.
• Generate reports and present findings to relevant personnel.
• Provide remote troubleshooting support through emails, ensuring customer issues are resolved promptly to maintain high satisfaction levels.
  
  Requirements:
• Diploma in Engineering or equivalent (Electrical/Electronics/Mechanical/Mechatronics).

Infrastructure and Security Engineer

Job Responsibilities:

• Analyze IT specifications to assess security risks
• Install, configure, upgrade and maintain security and network equipment.
• Secure networks through firewalls, password protection, RADIUS solution, and other systems
• Monitor network activity to identify issues early, perform troubleshooting and escalate to higher tier level.
• Maintain good relationship with End-user

Job Requirements:

• In-depth knowledge and experience with security systems: Firewall, Anti-Virus, MFA (e.g. RSA), CISCO ISE
• Proven Experience working with the following systems : FortiNet FWs, CheckPoint FW, AV Systems, Microsoft AD with special expertise in GPO, Trend Micro, Splunk, Thales HSM, Microsoft Certificates.
• Advantages: Experience in other IT infrastructure such as VMWare ESXi, Vcenter, NetApp Storage, CISCO Network Switches.
• Knowledge in networking and protocols (Switching, routing, Layer2-7).
• Knowledge in hardening end-equipment (FW, switches), as well as software (Windows Server OS, Linux CentOS, and other common OS).
• Incident response management – a plus.

Job Summary

We are looking for a Test Engineer who will be responsible for ensuring the quality and reliability of the operation system through testing and continuous improvement and will work on Projects for a reputed bank.

Mandatory Skill-set

• Degree in Banking, Financial Engineering, Computer Science or related discipline;
• At least 1-3 years of experience in software Quality Assurance;
• Prior experience in Manual Testing, UAT or similar roles;
• In-depth understanding of testing methodologies and practices;
• Possess strong verbal and written communication skills;
• Ability to work both independently and within a team with good inter-personal skills.

Desired Skill-set

• Has proficiency in testing tools such as JIRA, Selenium, Appium;
• Certified in ISTQB and CSTE.

Responsibilities

• Design, document, and execute test cases while preparing and creating comprehensive test data;
• Utilize in-house GenAI tools to streamline and enhance the creation and enrichment of test cases;
• Ensure timely execution of test runs and completion of test results within established deadlines;
• Develop and implement test plans to validate software functionality against defined requirements and specifications;
• Identify, document, and track software defects and issues, ensuring effective resolution;
• Conduct various testing types, including functional, performance, security, and regression testing, on software products;
• Communicate test outcomes and identified defects to development teams and relevant stakeholders, collaborating on resolutions;
• Offer suggestions and constructive feedback to improve the software development process and overall quality;
• Work closely with the Testing Centre of Excellence (COE) to refine testing processes and establish standardized testing practices across operations.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

This is a permanent role with an A1 Main contractor. This is for an LTA project and therefore, if you have previous experience on LTA projects, the prior experience will be an added advantage.

• Minimum 7 years in engineering experience in Civil & Structural works
• Experience in infrastructure projects is mandatory (LTA Project is highly preferred)
• Site experience in Underground roadway project; and
• Design management with consultantancy background on structural engineering is recommended
• Proficient knowledge of structural design, analysis software such as STADD and AutoCAD (or Microstation)
• Good knowledge of authorities’ requirement

This is a permanent role for a main contractor in Singapore. Position is based in headquarters office.

• Develop and maintain project schedules in consultation with the project team
• Coordinate and obtain inputs from project team, contractors and suppliers to support the development of project programs
• Prepare baseline schedule which includes resources and cost loadings
• Work on progress forecast and prepare rolling program
• Update, track and report project progress against planned schedule
• Monitor and control progress to make sure that turnover and cost is in line with master construction program
• Ensure material submission and approval
• Ensure project orders and deliveries are in accordance to agreed schedules

Requirements

• Degree in Building Construction Management / Civil Engineering or equivalent
• At least 5 - 10 years’ relevant experience in construction
• Proficiency in Primavera P6 is mandatory
• Familiar with earned value method

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Responsibilities:

· Identify new market opportunities and generate new sales leads

· Follow up on sales funnel and ensure successful completion of projects with prompt customer service and satisfaction

· Plan and develop sales plans to achieve sales objectives & monthly sales target

· Manage entire sales cycle from pre-sales discussion with customers, prepare quotations, negotiate orders, contract review to post-sales support

· Develop and conduct presentations explaining products and provide product knowledge to new and existing clientele

· Provide technical & sales support to key clientele like Architects, Lighting Consultants, Interior Designers, Landscape Designers and M&E Consultants

· Maintain and develop trusting long-term relationships with new and existing customers through understanding their business activity and needs

· Promote and represent the company professionally at trade exhibitions, events and product demonstrations

· Prepare reports and forecasts as and when requested by the management in a timely and accurate manner

Requirements:

· Minimum Diploma in any Electrical/ Electronic/ Mechanical/ Building Engineering

· Minimum 3 years of relevant working experience in building industry preferred

· Strong passion in sales and highly driven to achieve targets

· Enjoy working with a dynamic team and able to work confidently in a fast-paced environment

· Meticulous and ability to multi-task with good organisation skills

· Possess strong interpersonal, communication, presentation and negotiation skills

· Good problem-solving skills and ability to work as a team

· Good track record in project sales and large tender preparation

** 5-day work week

** Shuttle Bus Service provided at Ang Mo Kio / Yio Chu Kang MRT

Summary:

• Basic up to 6k
• Yearly performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Description:

1. Responsible for testing the communication performance of the company's mobile phones.

2. Responsible for project testing execution, report writing, bug submission and tracking, etc.

Job Requirements:

1. Interested in mobile phone testing, responsible, proactive, strong learning ability.

2. Candidates with testing or mobile phone-related work experience are preferred (also welcome friends interested in the IT industry but without experience, who can be trained from scratch).

3. Good English and Chinese reading and writing skills to communicate with customers in China and Singapore.

Working Hours: 9:30 am -6:30 pm, weekends off