Job Description

• Perform process design for chemical plants, storage terminals, industrial waste facilities in basic design, FEED and detailed engineering stage.
• Responsible for developing process engineering deliverables including PFD, P&ID, calculation reports, heat and mass balance, system descriptions, line list, simulation model, utility consumption list, process control philosophy, etc in accordance with project requirement and applicable codes/standard.
• To carry out process calculations such as hydraulic calculation, surge analysis, heat transfer calculation, pressure relief and blowdown analysis, utility consumption calculation, equipment sizing, etc.
• Develop firefighting design philosophy, fire water/foam demand calculation and fire water/foam network hydraulic simulation as per local regulation and international code/standard.
• Develop design basis and UFD for utility supply system and wastewater handling system.
• To participate in design review, Process Hazard Analysis, SIL Studies, 3D Modeling review and prepare close-out reports when required.
• Work closely and co-ordinate with other engineering disciplines for preparation of process deliverables and provide process parameter input as required.
• Provide regular update to Lead Process Engineer, Process Manager and Engineering manager on process related technical and engineering issues.

Requirements:

• Diploma and Bachelor’s Degree in Chemical,Process Engineering or equivalent
• Team player with strong analytical and communication skills
• Minimum 3 years of experience in oil & gas/petrochemical/water treatment /chemical plants
• Fresh Graduates are also welcome to apply

1. MUST HOLD ANY DIPLOMA OR DEGREE IN ANY MANNER IN A RECOGNISED UNIVERSITY/BOARD

2. MUST HAVE A MINIMUM OF 5 YEARS OF EXPERIENCE IN THE CONSTRUCTION SECTOR

3. MUST BE FLUENT IN ENGLISH.

4. SHOULD COOPERATE FOR OVERTIME WORKING IF NECESSARY

5. SHOULD FOLLOW SUPERIOR'S INSTRUCTION TIME TO TIME

6. SHOULD BE FAMILIAR WITH SINGAPORE ROAD ROOTS

7. SHOULD HAVE CLASS 3/3C DRIVING LICENCE

8. SHOULD OBEY THE COMPANY RULES AND REGULATIONS

9. SHOULD BE READY FOR LOADING AND UNLOADING

10 SHOULD BE ABLE TO HANDLE THE SITE INDEPENDENTLY

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Job Descriptions & Requirements

1. Technical Expertise and Leadership

Deep Technical Knowledge: Possesses a high level of expertise in semiconductor technologies, processes, or specific product areas. This includes understanding intricate details of semiconductor design, fabrication, testing, or applications.

Guidance and Mentoring: Provides guidance and mentorship to less experienced engineers and technical staff, helping them solve complex problems and develop their skills.

Advanced Problem Solving: Tackles the most challenging technical problems, often involving novel or complex issues that require in-depth analysis and innovative solutions.

2. Project Oversight and Innovation

Project Leadership: Leads high-impact projects or initiatives, ensuring that they align with the company’s technical and business goals. This includes overseeing project execution, managing risks, and ensuring quality outcomes.

Innovation: Drives innovation by researching new technologies, methodologies, or processes. Identifies opportunities for improvement and contributes to the development of cutting-edge solutions or products.

Technical Strategy: Contributes to the development of the company’s technical strategy and roadmap. Ensures that projects and initiatives align with long-term business objectives.

3. Collaboration and Communication

Cross-Functional Collaboration: Works closely with other departments, such as design, manufacturing, and quality assurance, to ensure seamless integration of technical solutions and processes.

Customer Interaction: Engages with customers to understand their needs and provide technical support or solutions. This can involve presenting technical information, addressing customer concerns, or customizing solutions for specific applications.

Technical Documentation: Creates and maintains detailed technical documentation, including design specifications, test plans, and reports. Ensures that all technical information is clear and accessible for stakeholders.

4. Process Improvement and Quality Assurance

Process Optimization: Analyzes and improves existing processes to enhance efficiency, reliability, and performance. Implements best practices and standards to ensure high-quality outcomes.

Quality Control: Ensures that products or solutions meet quality standards and regulatory requirements. Oversees the implementation of quality assurance processes and addresses any issues related to product performance or reliability.

5. Strategic Contributions

Technical Reviews: Participates in or leads technical reviews, including design reviews, feasibility studies, and project evaluations. Provides insights and recommendations based on technical expertise.

Strategic Planning: Assists in strategic planning by providing technical input on new product development, market trends, and technological advancements. Helps define the direction for future projects and initiatives.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

The role of a Construction Engineer is pivotal within the construction industry, operating at the intersection of engineering and project management to ensure that construction projects are executed efficiently and safely. These professionals play a vital part in planning, designing, and overseeing construction efforts, from small-scale residential buildings to large infrastructure projects like highways and skyscrapers. Their expertise ensures that structures are not only aesthetically pleasing but also structurally sound and compliant with legal and environmental standards.

About Certis

We are a leading security services organisation. We put technology to work in making the world a safer place. Our mission is that as trusted partners, we protect lives and assets, and deliver integrated critical services. By empowering our people, our goal is to enable our communities to stay safe and thriving. We offer a broad range of opportunities and career pathways for our people to grow and explore their potential. We believe that people, equipped with innovative thinking and technological capabilities will make the world safer, smarter and better.

Life at Certis

If you are a passionate individual looking for opportunities to expand your skills, and purposeful work instead of just a ‘job’, we would love to hear from you. At Certis, no two days look alike. Our work calendars are filled with chances to collaborate with others, and bring new initiatives to life. Whether you’re looking to improve a process, or have an innovative idea awaiting a technology solve, we want you to bring your ideas to the table. We are a close-knit team that looks out for each other, works hard to get the job done, and encourages each other to grow – the perfect place for you to grow your career!

Resopnsibilities

• Responsible for planning, execution and supervision of all facilities management and operation activities.
• Manage term contractors and lead a team of technical officers and technicians in facilities operation, troubleshooting, preventive and breakdown maintenance works.
• Provide feasible solution and co-ordinate with owners, contractors/vendors and users on engineering functional requirements and to ensure objectives are achieved.
• Responsible for project costs control, maintaining quality service standards and related documentation works.

Requirements

• Possess a recognized Degree/Diploma in Engineering or Building Services (or any other related field).
• Minimum 3-5 years of relevant experience in facilities management and related field.
• Self-driven, resourceful, able to multi-task and a good team player.
• Able to work independently and take ownership of assignments and manage operation with good leadership attributes.
• Possess good interpersonal and communication skills.

What you can expect from us:

• Work on projects for world-class security projects renowned for their safety, reliability and efficiency
• Commitment to your ongoing development, including on-the-job opportunities, formal programs and assistance with further education
• Community volunteering opportunities
• A competitive remuneration package, featuring performance-based incentives and a medical insurance and dental allowance.

Visa is a world leader in payments and technology, with over 259 billion payments transactions flowing safely between consumers, merchants, financial institutions, and government entities in more than 200 countries and territories each year. Our mission is to connect the world through the most innovative, convenient, reliable, and secure payments network, enabling individuals, businesses, and economies to thrive while driven by a common purpose – to uplift everyone, everywhere by being the best way to pay and be paid.

Make an impact with a purpose-driven industry leader. Join us today and experience Life at Visa.

We are developing and executing a shared strategic vision for Loyalty & Marketing Services platforms and products that enable Visa to be the world-leading data-driven payments company. As a Data Engineer, you will be part of world-class team of Engineers to define, drive and execute on this vision. We are looking for a self-motivated individual with software engineering skills and expertise with Java, Web technologies & Big data. The candidate will be extensively involved in hands-on activities including POCs, design, development, testing, and documentation. Candidate must be flexible and willing to switch tasks based on team's needs.

Primary responsibilities will include:

• Design and develop mission-critical systems, delivering high-availability and performance
• Work on development of new products and enhancements to existing systems iteratively by building quick POCs and converting ideas into real products
• Work closely with architects, business and technical stakeholders to develop high quality products and services that meet business requirements and expectations while applying the latest available tools and technology
• Instill best practices for software development, and deliver high quality work on tight schedules
• Identify opportunities for further enhancements and refinements to standards and processes
• Coordinate Continuous Integration activities, testing automation frameworks, and other related items in addition to contributing core product code
• Present technical solutions, capabilities, considerations, and features in business terms. Effectively communicate status, issues, and risks in a precise and timely manner

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Basic Qualifications

• Bachelors degree, OR 3+ years of relevant work experience.

Preferred Qualifications

• 1 to 2 years of software development work experience along with a Bachelor’s degree, or 2+ years of work experience with an Advanced Degree in a technical field such as computer science, computer engineering, or a related field.
• Solid foundation in computer science with strong competencies in data structures, algorithms, and software design optimized for building highly distributed and parallelized systems.
• Proficiency in Java or Scala with strong design and coding skills.
• Hands-on experience with web technologies including Spring Boot, HTML, CSS, JavaScript, JSON, JQuery, and REST API.
• Practical knowledge of Angular.
• Working experience with Spring and Hibernate frameworks.
• Experience with Apache Spark is plus.
• Familiarity with Git/Stash, Ant, Maven, Jenkins, and Jira.
• Experience with database technologies like DB2, Oracle, SQL Server.
• Knowledge of Unix/Linux operating systems.
• Experience with Agile & DevOps methodologies.
• Excellent analytical and problem-solving skills with a strong automation mindset.
• Capability to handle multiple competing priorities in a fast-paced environment.
• Excellent written and verbal communication skills and the ability to effectively communicate logic and implementation plans to team members and managers.
• Self-starter, quick learner, and detailed and thorough.
• Experience in payment processing is a big plus.

Job Description

• Installation, commissioning, maintenance and testing of equipment.
• Compile field service reports after servicing of equipment.
• Provides product, service, or equipment technical and engineering information by answering questions and requests.
• Maintains product database, entering data.
• Maintains professional and technical knowledge.

Job Requirements

• Diploma in Electrical & Electronic Engineering or higher
• Strong interpersonal skill
• Good analyzing information and verbal communication skills
• Class 3 driving license

Additional Notes:

• Opportunities for overseas training and job.
• On the job training and Safety training will be provided.

Job Description

· Project planning and management.

· Ensure timely completion of projects and execute project tasks within the agreed timescales and budget.

· Responsible for site supervision, safety, resource planning, coordination works and testing & commissioning.

· Plan, coordinate and monitor orders and deliveries.

· Work with sales team to ensure design plan and output meet customers’ requirements.

· Ability to handle combination of projects concurrently at times with respective project technical leads on-site.

· Liaise with customer, vendors, M&E consultants, and project team to ensure quality control, customer satisfaction and projects are completed on time.

· Initiate, implement, and document new processes/ procedures to improve quality, cost, and productivity of the project.

· Liaise with M&E consultants and vendor.

· Adhere to ISO procedures and standards.

· Handle ad hoc assignments or tasks as required.

Requirement

• Bachelor’s degree in project management, business management, or related area of study.
• 5-7 years of experience as a Project Manager or similar position responsible for defining and managing project scope, timelines, profitability, and effective delivery of products or services.
• Experience in managing delivery of customer-facing and internally facing products or services.
• PMI or PMP certification or similar from an accredited organization.
• Intermediate to advanced proficiency with industry-standard word processing, spreadsheet, and presentation software programs.

• Designing, implementing, maintaining and improving electrical products and systems.
• Using engineering software and equipment for computer-aided design and other complex technical tasks including AutoCAD
• Establishing and enforcing construction, installation standards.
• Loading & Unloading
• Overtime Applicable ( Sat & Sunday)
• Performing feasibility studies for industrial, domestic and commercial technical developments.
• Preparing specifications for purchases of electrical equipment and materials.
• Supervising or training project team members.
• Estimating material, labor, or construction costs for budget preparation.
• Maintaining electrical equipment.
• Working with a variety of technicians.

(A) Essential Job Functions:

The QAQC Engineer is responsible for, but not limited to, the following:

Planning and Programming

• Develop testing and commission schedule together with vendors and forward to client/commissioning team for approval.

Quality

• Test all items in inspection and test plan at work site or laboratory to verify conformation to the specified requirements.
• Implement and control tagging procedures at different levels.
• Coordinate with M&E department on M&E installation and T&C.
• Liaise with external laboratory to carry out the testing of materials.
• Organize and conduct handling over punch walks with clients and consultant team.
• Assist Manager in preparing handling over documents and handling over process.
• Ensure all site inspection records, QAQC documents and TC records are up to date.

Safety

• Responsible for the compliance to safety and occupational health practices to be implemented at QAQC section.
• Responsible for site implementation of safety standards to comply with IMS safe work methods.
• Responsible for attendance to daily site coordination meeting.

Others

• Assist in all CONQUAS and QM assessment.
• Any ad-hoc duties assigned by supervisor.

(B) Minimum Qualifications/ Job Experience:

• A Degree / Diploma holder with minimum 5 years of experience in concrete technology, inspection, quality control and quality assurance procedures related to the production of high-quality pre-cast reinforced concrete products.
• Prior experience in working in construction site preferred, especially in Civil Projects.

Roles & Responsibilities:

• Designing, implementation, planining on-premises environment to public cloud providers like AWS, Azure, Oracle
• Managing Kubernetes pod rotation, Scaling of Kubernetes deployments, Kubernetes labels and namespaces.
• Monitoring the Application Infra related Incidents/alerts from the multiple monitoring tools like Tivoli, Sensu, Onecheck
• Handling automation via shell scripts
• Responsible for impact analysis and design modifications to existing systems to support new solution
• Provide technical support to software users
• Perform troubleshooting/Automate operations using AWS System Manager
• Collaborate with software engineers to ensure that code is of the highest quality
• Performing the changes related to the application via the servicenow change management tool.

Requirements:-

• Bachelor’s degree in Information Technology, Computer Science, or related field.
• 5 to 7 years of experience in software enginner or software development role or similar related role.
• Experience that will demonstrate proficiency and ease with one or more programming languages, scripting languages and operating systems.
• Solid hands-on development experience in technologies like AWS, cloud, oracle ,API and related technology stacks
• Experience in Automation using Slack Bot and Slack API.
• Strong foundation expected in Application hosted in the AWS cloud environment using cloudwatchwolf
• Strong designing, analytical, programming & communication skills needed, along with aptitude for building stable solutions.
• Expertise in Unix Shell scripting and automation via shell scripts.
• Demonstrable experience utilizing object-oriented patterns and design best practices is a strong plus.
• Exposure to tools like Linux(RHEL) , (CENTOS, UBUNTU; Windows servers Client is desired. UNIX skills are required.
• Experience in other AWS services like CDN, EFS, ACM, WAF, Route 53, SES[Email service] Storage Gateway
• Supporting Apache webserver & MySQL

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Job brief

We are looking for an innovative Civil Engineer to design, develop and construct a huge range of projects of the physically and naturally built environment from conception through to completion. You will have a say in how the world looks like, work in a fast growing dynamic industry, contribute towards healthy economies and make a lasting positive impact to society.

Responsibilities

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Provide advice and resolve creatively any emerging problems/deficiencies
• Oversee and mentor staff and liaise with a variety of stakeholders
• Handle over the resulting structures and services for use
• Monitor progress and compile reports in project status
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

Requirements and skills

• Proven working experience in civil engineering
• Excellent knowledge of design and visualizations software such as AutoCAD,Civil 3D or similar
• Proficiency in site layout, grading, utility design, erosion control, regulatory approvals etc
• Project management and supervision skills
• Strong communication and interpersonal skills
• License of professional engineer
• BS/MA in Civil Engineering

Job brief

We are looking for an innovative Civil Engineer to design, develop and construct a huge range of projects of the physically and naturally built environment from conception through to completion. You will have a say in how the world looks like, work in a fast growing dynamic industry, contribute towards healthy economies and make a lasting positive impact to society.

Responsibilities

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Provide advice and resolve creatively any emerging problems/deficiencies
• Oversee and mentor staff and liaise with a variety of stakeholders
• Handle over the resulting structures and services for use
• Monitor progress and compile reports in project status
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

Requirements and skills

• Proven working experience in civil engineering
• Excellent knowledge of design and visualizations software such as AutoCAD,Civil 3D or similar
• Proficiency in site layout, grading, utility design, erosion control, regulatory approvals etc
• Project management and supervision skills
• Strong communication and interpersonal skills
• License of professional engineer
• BS/MA in Civil Engineering

Job brief

We are looking for an innovative Civil Engineer to design, develop and construct a huge range of projects of the physically and naturally built environment from conception through to completion. You will have a say in how the world looks like, work in a fast growing dynamic industry, contribute towards healthy economies and make a lasting positive impact to society.

Responsibilities

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Provide advice and resolve creatively any emerging problems/deficiencies
• Oversee and mentor staff and liaise with a variety of stakeholders
• Handle over the resulting structures and services for use
• Monitor progress and compile reports in project status
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

Requirements and skills

• Proven working experience in civil engineering
• Excellent knowledge of design and visualizations software such as AutoCAD,Civil 3D or similar
• Proficiency in site layout, grading, utility design, erosion control, regulatory approvals etc
• Project management and supervision skills
• Strong communication and interpersonal skills
• License of professional engineer
• BS/MA in Civil Engineering

Role – M365 Engineer

Mandatory Skills - M365 Certified , Hands on experience in Quest tool , Exchange online , Mailbox , Windows 10 / 11 , Intune .

Experience - 5 years ( Max )

We are seeking a skilled and experienced M365 Engineer to join our team. The ideal candidate will be responsible for setting up, configuring, managing, and operating our M365 tenant and workloads. This role requires a deep understanding of Microsoft 365 services.

Key Responsibilities :

Setup and Configuration:

Deploy and configure M365 services, including Teams, Exchange Online, Windows 10/11 Deployment and Intune.

Implement security and compliance policies to ensure data classification and compliance.

Conduct Proof of Concept (POC), new product evaluations and fitment.

Configure and manage user accounts, licenses, and permissions.

Management and Operation:

Monitor and maintain the health and performance of M365 services.

Troubleshoot and resolve issues related to M365 services and applications.

Perform regular updates and maintenance to ensure optimal performance and security.

Collaboration and Support:

Work closely with other IT teams to integrate M365 services with existing systems and applications.

Provide technical support and guidance to end-users and other IT staff.

Conduct training sessions and create documentation to help users effectively utilize M365 services.

Continuous Improvement:

Stay up to date with the latest M365 features, updates, and best practices.

Identify opportunities for process improvements and automation to enhance efficiency and productivity.

Participate in the planning and lead execution of M365-related projects and initiatives.

Required Skills and Qualifications:

Bachelor’s degree in computer science, Information Technology, or a related field.

Microsoft 365 Certified: Enterprise Administrator Expert or other relevant certifications.

Proven experience in setting up, configuring, managing, and operating M365 tenant and workloads.

Strong knowledge of Microsoft 365 services, including Teams, Exchange Online, Windows 10/11 Deployment and Intune.

Experience with PowerShell scripting for automation and management tasks.

Experience with hybrid M365 environments and integration with on-premises systems.

Familiarity with security and compliance features in M365, such as Data Loss Prevention (DLP), Conditional Access, and Multi-Factor Authentication (MFA).

Knowledge of Azure Active Directory and related identity management solutions.

Excellent problem-solving and troubleshooting skills.

Strong communication and interpersonal skills.

Job Description:

• Responsible in preparing documentation including daily report, monthly progress report, method of statement and work procedure to project manager.
• Responsible in overseeing drawing management and make sure the updated drawings to the clients and subcontractor are issued.
• Assist the project manager or senior project engineer in coordinate with related consultant and quantity surveyor on the change order issued
• Coordinate and work closely with safety personnel to ensure all government and safety regulation are complied.
• Conduct weekly or monthly meeting with sub-contractors to update the progress of work.

Job Requirements:

• Degree in Engineering is required/preferred
• minimum 3 years of Project Management knowledge, skills, experience.
• Good interpersonal and communication skill
• Good organization skill
• Able to multitask
• Able to work under fast paced environment

Job Overview:
We are seeking a highly motivated and skilled Service Engineer to join our service team. The successful candidate will be responsible for the installation, commissioning, maintenance, and troubleshooting of our products and systems at customer sites. This role requires a hands-on approach and the ability to provide exceptional technical support to our clients.

Key Responsibilities:

• Install, commission, and service fluid control systems, dosing pumps, and water treatment equipment.
• Perform preventive and corrective maintenance on installed systems.
• Troubleshoot and resolve technical issues in a timely manner.
• Provide technical support and training to clients regarding equipment operation and maintenance.
• Conduct site inspections and assess customer requirements.
• Prepare service reports, documentation, and technical feedback.
• Collaborate with the sales and engineering teams to deliver optimal solutions to clients.
• Ensure compliance with safety regulations and company policies.
• Maintain and manage tools, spare parts, and service equipment.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for professional growth and development.
• A collaborative and innovative work environment.
• Comprehensive training and support.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for DevSecOps Engineer

Internal Code: A24123

What will you do?

• Support cost optimisation got GCC environment
• Project administration and documentation (procurement, audit etc)
• Drive cloud-related initiatives with other teams (coordination)
• Advise and support project teams with cloud-based domain knowledge
• Support incident management (when needed)
• Plan and organise workshops
• Support operations for applications hosted on Amazon Web Services (AWS) or Government on Commercial Cloud (GCC)
• Present and share new ideas or information with department or management committee
• Document requirements, source and evaluate alternatives, and recommend solutions
• Work with the vendors on the solutions and design to seek clarification and acceptance.
• Assess and ensure applications are in full compliance to IM8 and security requirements laid out by Government Agencies.
• Remediate any non-compliance or security findings related to accounts in GCC environment
• Perform scripting or low-code development
• Review and refine existing processes and workflows to improve efficiencies.

What are we looking for?

• Tertiary education in Computer/Computer Science or Information Technology or equivalent
• AWS certifications such Developer (Associate) Certification, AWS SysOps Administrator (Associate), AWS Solution Architect (Associate/Professional), AWS DevOps Engineer (Professional) is preferred
• Knowledge of serverless architectures
• Familiarity with various coding languages, such as Python, Java etc.
• Ability to work both independently and as part of a team with professionals at all levels
• Results oriented
• Hands-on experience in handling operations and incident management
• Strong proficiency in AWS services and architecture
• Experience with infrastructure-as-code tools (e.g., Terraform, CloudFormation)
• Proficiency in scripting languages (e.g., Python, Java)
• Familiarity with security tools and practices (e.g., SAST, DAST, IAST)
• Understanding of cloud security best practices
• Experience with monitoring and logging tools (e.g., CloudWatch)
• Experience in supporting operation for applications hosted on Amazon Web Services (AWS) or Government on Commercial Cloud (GCC)
• Familiarity with governance and adoption for enterprise IT environments
• Strong analytical, conceptualisation and problem-solving skills
• Team player with strong organization and people handling skills
• Excellent communication skills, both oral and written, with the ability to pitch ideas and influence stakeholders
• Working experience in government environment and/or cybersecurity related fields will be an added advantage
• Advantageous to have experience in the following areas: Government IM8 policies.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice () to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.