• Design the power supply system according to P&ID, equipment list and instrument list to meet the requirement of specification
• Calculate and select equipment, component, cable and wire to meet the requirement of specification
• Develop cost estimates for electrical products and electrical works, inclusion of scheduling electrical works.
• Integrate with plant design engineer to develop electrical equipment and cable/ wire layout
• Discuss and develop the control system with sub-contractor based on internal design data, e.g. P&ID and control logic
• Perform installation and testing and commissioning of electrical system.
• Work on site and with clients and other stakeholders.
• Project coordination, ensure project is on schedule and is running smoothly.
• Handles technical matter on the site.
• Other duties as assigned.

Requirement:

• Diploma / Degree in electrical engineering or any other equivalent
• 2 Years of relevant working experience
• Good understanding on Singapore electrical codes and requirements
• Familiar with PLC (Siemens, AB, Mitsubishi, etc.)
• Familiar with the electrical construction specification requirements and safety specification requirements on the project site
• Understand the knowledge of power supply and distribution
• Able to discuss electrical technology with customers or contractors independently
• Experience in AutoCAD, Microsoft office software will be added advantages

Interested candidate please send a copy of your updated resume to [email protected]

HR in-charge: KC Cheah

Job Description

• Engage in assessment, planning, design, and implementation of core network solutions, focusing on data engineering, including routing/switching, security (Checkpoint, Palo Alto, Fortinet), Wireless/RF (Cisco, Aruba), micro-segmentation (ISE/Clearpass), SD-WAN, Data Center SDA (ACI/NSX), and automation (Ansible, Python).
• Design, deploy, document, and support medium to large-scale network projects.
• Work with cutting-edge technologies and support network migrations involving Cisco Cat 9000, Nexus, ISR, and ASR routers.
• Develop high-level and low-level designs for new builds and data center/site migrations.
• Execute migration plans within scheduled windows, including after-hours and weekends.

Qualifications

• 5–8 years of experience in financial or telecom industries with expertise in network design and implementation with hands-on experience with Arista Networks solutions.
• Proven expertise in Data Center networking, including design, implementation, and optimization.
• Proficient in routing protocols (BGP, EIGRP, OSPF) and WAN technologies (MPLS/VPLS).
• Strong experience in complex data, voice, video, and WLAN network environments.
• Broad knowledge of DHCP/DNS, TACACS/RADIUS, and VPN preferred.

We regret to inform that only shortlisted candidates will be informed.

EA Registration No.: R1658484, Amita Raj

Allegis Group Singapore Pte Ltd, Company Reg No. 200909448N, EA License No. 10C4544

A. Main Responsibilities

1.Responsible for all on-site technical and engineering matters.

2.Ensure works carried out meet company’s quality standards & contractual requirements.

3.Involved in project planning, monitoring project progress and schedule.

Including prepare work plan, schedule, preparation all the related work procedure/method statement, job safety analysis, technical clarification , resources management and procurement arrangement .

4.To co-ordinate with the client, consultant, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.

Include attending all progress meeting.

5.Assisting Project Manager in monthly progress claims and monthly progress reports.

6.Ensuring supervisors, foremen, workers and sub-con meets client & regulatory work requirements.

7.Ensuring Environmental, Safety and Health practices are carried out at all times.

8.Other ad-hoc duties assigned from time to time

Requirement

• Diploma/Degree in Information Technology/Computer Science or any related study
• At least 3 years of relevant experience
• Skills on SDLC, CI/CD, Agile

Responsibilities

• Develop, maintain and administer tools which will automate operational activities and improve engineering productivity
• Identify industry best practices/solutions and pursue continuous improvement opportunities in SDLC / SDLC2 (Software Development Life Cycle) processes and practices, relentlessly drive for standardization, automation and self-services.
• Develop reusable, scalable, and testable automation scripts and tools for routine and repetitive tasks.
• Drive alignment efforts between development and operations teams to better recognize benefits of automation and cloud.
• Ability to research, propose and prototype new principles, technologies, tools and concepts and integrated them into the teams collective knowledge.
• Developing CI/CD roadmap and implementing to the projects. Help on AGILE/SCRUM Methodologies while execution.
• Manage and builds EAPI with Unit testing, Code Coverage, Enhancements. Same promote to Production through Jenkins CI/CD Pipeline.

Interested applicants, Please send your updated resume in Word format to [email protected]

Please indicate Job Code 109 on email subject

We regret that only shortlisted candidates will be notified.

IT Consultancy & Services Pte Ltd

EA No: 92C5311 | EA Reg No. R1104129

Please visit www.itcspl.com to learn more information about ITC

JOB DESCRIPTION:

• Hands on experience in design, implementation of Splunk architecture.
• Experience on Linux and Windows administration
• Able to do data onboarding, fields extraction according to Splunk best practices.
• Able to provide Splunk guide and Splunk operation document
• Able to setup forwarders and onboard new data sources into the environment.
• Able to troubleshoot and identify Splunk issue relating to performance and searches.
• Able to fine tune Splunk use cases (rule) and optimize searches performance.
• Able to create new dashboard to enhance the visualization of the data and create Splunk use cases for alerts/reports.
• Knowledge on index segregation and user restriction setup
• Knowledge on using Splunk Enterprise Security
• Able to do Common Informational Model for Enterprise Security.
• Good in communication and able to understand the requirements.

• AUTO CAD Drafting for building & Steel Plate NESTING.
• Have a good knowledge in CAD MATIC.
• Preparing Engineering Drawings and steel weight checking.
• QA / QC Document controller.
• Have a good knowledge in M.S OFFICE.
• Material taking off for fabrication.(MTO)
• -Preparing Dimensional Reports

• Checking and inspecting the quality of works during construction.

• Checking actual construction according to drawings and specifications.

• Coordinate with the clients for whatever revision on drawings and in

actual Construction and Submit weekly site works progress report to

the client.

• Project Planning.

• Materials and Resources Forecasting and Procurement process.

• Execution of the Entire Building’s Structures and Finishes with Project

Team for smoothing the work progress.

.Office Administrator works

Responsibilities

- To assist Project Manager on the day-to-day management of the site, including supervising and monitoring the site labourforce and the work of any subcontractors

- Liaising with local authorities, client's representatives, sub-contractors and consultants.

- Checking and ensuring all plans and work are as per specifications

- Resolving any technical difficulties and problem that may arise on site.

Requirements

- Degree holder in Construction/Building or related discipline.

- Minimum 2years experience from Contruction background.

- Positive personality and good team player.

- Meticulous and responsible.

- Able to multi task and work in tight schedules.

- Able to start with short notice would be an advantage,

Work closely with project managers and stakeholders to coordinate project resources and information, ensuring that the project requirements are met. As a Project Engineer (PE) you will be responsible for working across multiple teams while executing project plans and revising as appropriate to meet changing needs and requirements.

Project Tasks

• Discipline in detailed documentation and reporting of projects plan, project status and issue logs.
• Identify and schedules customer-facing meetings to assure effective completion of projects Manages day-to-day operational aspects of a project schedule.
• To assist in install, setup, testing and provide technical support for the product installation team.
• Monitoring compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.
• Review technical documentation of projects and implementations as well as service deliverables.
• Manage customer relations by fostering productive and effective relationships with business users.
• Timely escalation of critical situations and any likely project risk that can impact project delivery scheduled to Manager.
• Effectively and accurately set client expectations and deliverables.
• Write documents describing functional specifications, protocols, test cases and maintenance guidelines for medical equipment.
• Keep documentation of implementation on all medical equipment.

Requirements

• At least 4 years of experience working in the IT industry, preferably involved in project delivery adopting SDL
• Familiar with Networking, Microsoft Operating System and SQL Server
• Relevant experience or interest in project management will be highly advantageous
• Excellent communication skills (both written and verbal) and interpersonal skills
• Great attention to details and results-oriented
• Ability to influence and present to the leadership team
• Committed to the values of integrity, accountability, transparency, scientific rigor and drive
• Good verbal and written communication skills

Requirements

• Candidate must possess at least Professional Certificate in Engineering (Environmental/Health/Safety) or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Preferably Non-Executive specialized in Engineering - Environmental/Health/Safety or equivalent.

Responsibilities

The role of an Environmental Control Officer (ECO) is basically to look out for conditions/ situations in construction sites which cause environmental health problems or are likely to cause environmental health problems. He should report these conditions/ situations to the contractor together with recommendations on remedial measures to be taken to prevent recurrence.

The main areas where the ECO should pay attention to are as follows:

• Disease-bearing insects and rodents
• Proper disposal of construction waste
• Noise, air and dust pollution
• Earth littering
• Siltation of drains
• Food hygiene in canteens
• Any other environmental health matters

Job Description

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and client's requirements.
• To report to C&S QP, works closely with the regulatory authorities and contractors to provide supervision on site, resolve all site issues and ensure timelycompletion of the projects.
• To be competent in carrying out supervision of structural works by identifying any non-conformity of contractor's works on site. The appointed person must havethe strong ability to interpret the drawings and contract documents on works to be carried.
• Appointed person possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurancesystem.
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM.
• To manage the site supervisors with respect to C&S engineering works, architectural and MandE engineering works.
• To attend site, progress, variation and coordination meetings Interpret drawings and contract documents on works to be carried.

Job Requirement

• Recognized Degree in Civil/Structural Engineering acceptable for registration with the PE Board, Singapore.
• Accredited with IES/ACES with a valid Resident Engineer Practicing.
• Minimum 8 years’ experience preferably in steel and precast building construction.
• Must be familiar with local Regulations/Codes for Civil and Structural related to building projects.
• Must have experience in condominium project.
• A good team player and experience in leading a team of Resident Technical Officers.
• Carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM.
• Supervision of C&S and Architecture works by identifying any non-conformity of contractor’s works on site.
• Strong ability to interpret the drawings and contract documents on works to be carried.
• Supervision and manage site supervisors with respect to C&S and Architecture Work.
• Ability to resolve site and technical issues, prepare and document detailed site progress reports.

Responsibilities

• Design, build, and optimize scalable data pipelines using Scala and Hadoop frameworks.
• Develop and implement techniques and analytics applications to transform raw data into meaningful information using data-oriented programming languages and visualisation software.
• Write and optimize complex SQL queries for efficient data retrieval and transformation.
• Troubleshoot and resolve performance issues in queries and data workflows.
• Manage Hadoop-based data infrastructure, including HDFS, Hive, and related components.
• Monitor system performance and optimize resource utilization in a distributed environment.

Skills/Requirement

• Proficiency in Scala programming and functional programming principles.
• Strong SQL skills, including query optimization and database design.
• Hands-on experience with Hadoop ecosystem tools (HDFS, Hive, YARN, MapReduce).
• Familiarity with other big data tools like Spark, Kafka, or Flink is a plus.
• Strong analytical skills with the ability to troubleshoot and resolve complex data issues.
• 6+ years of experience in data engineering, big data technologies, or a similar role.

Interested candidates, who wish to apply for the above position, please send in your resume to: [email protected]

PERSOLKELLY Singapore Pte Ltd EA License No. 01C4394 EA Reg No: R23118975 (ABDUL RAHMAN ANSARI RAJA)

We regret to inform you that only shortlisted candidates will be contacted.

**********************************

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

**********************************

Responsibilities :

● Create and maintain automated test cases, test plans and test framework ensuring that they are up to date with requirements and policy changes

● Create, maintain and improve the automated test framework and test environments

● Conduct testing on new features and file defects

● Perform various tests such as manual/functional/performance/exploratory tests and support UATs

● Assist in resolving production cases

Requirements :

• Bachelor’s degree in Computer Science, IT or related fields
• At least 3 years of professional software quality testing experience with hands-on automation
• Strong understanding of testing techniques, risk analysis
• Strong understanding of test-driven development, continuous integration and continuous delivery
• Proficiency in programming languages such as Java or Kotlin. Knowledge of Spring Boot will be an advantage
• Experience with open-source automated testing frameworks such as Cucumber, TestNg and Playwright
• Experience with open-source performance testing tools such as JMeter, Gatling, Locust or enterprise level tools such as HP LoadRunner
• Experience with open-source penetration testing tools such as ZAP, Burp Suite, SQL Map or enterprise level tools such as HP WebInspect, Nessus, CheckMarx
• Experience working in SCRUM teams
• Excellent communication and collaboration abilities
• Proactive, self-driven and motivated

Job description

· Develop and monitor project schedules in consultation with project team.

· Coordinate and obtain inputs from project team, contractors and suppliers to support the development of project programs

· Work on progress forecast and prepare rolling program

· Coordinate with client’s planner on programme and progress matters.

· Update, track and report project progress against planned schedule

· Monitor and control progress to make sure that turnover and cost is in line with master construction program

· Ensure material submission and approval

· Ensure project orders and deliveries are in accordance to agreed schedules

Requirements

·Degree in Civil Engineering with 5 years’ experience preferably in Construction planning and programme coordinator in Water Reclamation Plant Construction Project

· Good knowledge of construction and general application of principles, theories and industry practices and standards

· Proficient in planning and scheduling techniques

· Ability to influence various stakeholders and build long-term relationships.

· Hands-on experience with Primavera P6 is a must

· Strong organizational and interpersonal skills.

· Strong time management skills with exceptional attention to detail and ability to manage multiple tasks/ projects at one time

· Ability to analyse and synthesize complex issues quickly

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma in Civil Engineering or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Required Skill(s): MS OFFICE, DRAWING INTERPRETATION
• Specialized in Engineering - Civil/Structural or equivalent.
• Plan, coordinate, supervise and manage the civil and structural works
• Coordinate and attend meetings with clients, consultants and sub contractors.
• To ensure and maintain high standard of work, safety and good work productivity.
• Other adhoc duties as and when directed

We are looking for a Desktop Support Engineer with expertise in Hardware Support in Desktop Systems, Mobile Devices and IPT. You will be part of the Client Services On-Site Delivery (OSD) team within Core Engineering that provides on-site technical support for internal business users, covering workplace systems, hardware, and multimedia support. The role involves hardware lifecycle management, infrastructure build-out, troubleshooting, and multimedia event support, with occasional data center services, cabling, and patching in regional offices.

Key Responsibilities

• Provide on-site support for workplace hardware and software, including desktop systems, mobile devices, and IPT.
• Handle hardware setup, provisioning, and lifecycle management, including inventory scanning and disposal.
• Offer second-level support for internal users and high-touch support for Platinum users.
• Perform Move, Add, Change (MAC) tasks, power-down execution, and BCP site maintenance.
• Troubleshoot Windows 10/11 systems, desktop builds, and software distribution processes.
• Document and update procedures, ensuring clarity and accessibility.
• Collaborate with engineering teams on workplace-related projects and pilot testing.
• Manage vendor coordination for project and operational needs.

Skills and Qualifications

• Strong knowledge of desktop hardware, telecom, multimedia, and mobile devices (e.g., BlackBerry).
• Expertise in Windows 10/11 troubleshooting and software distribution processes.
• Excellent communication and teamwork skills to engage with end users and offshore teams.
• Ability to prioritize tasks, track multiple assignments, and escalate issues when needed.
• Flexible schedule with the ability to work extended hours or weekends when required.
• Vendor management and coordination experience.

This role is on an initial 6 months contact role.

Process Engineer

Our client is a leading global manufacturer of polymer. They are currently seeking for Process Engineer to monitor their manufacturing process.

The role of the Process Technician includes:

1. Support in implementation and participate in the continuous improvement effort in the areas of Safety, Quality, Environment and Health Management System (for example SS506 part 3, ISO 9001, ISO14001, OHSAS 18001, IATF 16949).
2. To have a legal obligation to act in a responsible manner for the safety of themselves and other persons who may be affected by their actions or omissions at work.
3. Assist the Management in ensuring that Major Accident Hazards are reduced to As Low as Reasonably Practicable (ALARP) and escalate when necessary.
4. Ensure compliance to Customer Specific Requirements (CSR).

Job Requirement:

1. Degree in Chemical / Mechanical engineering or its equivalent
2. Minimum 2 years experience as process engineer in a chemical processing plant
3. Good knowledge of chemical engineering, mechanical engineering and / or polymer science
4. Experience in a process safety management, quantitative risk assessment such as LOPA (layer of protection analysis) or safety case preparation will be advantageous
5. SCEM, or Steam engineer/ boiler attendant certificate, preferable
6. Working knowledge in ISO9001, ISO14001, SS506-Part 3, cost control and regulations
7. Highly motivated, energetic individual, with inquiring mind set and willingness to take up new challenges 8. Good interpersonal and communication

Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability.

WE REGRET TO INFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)
Posting Personnel: Win Hui
EA Personnel Reg No.: R23115634

Kindly send in your latest job resume without your NRIC numbers and other ID numbers.

For job resume(s) that contain NRIC numbers and/ or ID details, it may not be processed and your job application may be rejected due to unacceptable submission of job application details. Please refer to the advisory guidelines on the PDPA for NRIC numbers and other ID numbers.

By sending your job resume to us, it shall be deemed that you have agreed and hereby give your consent to MANFIELD in collecting, using and/ or disclosing your personal data for the purpose of accessing and processing your job application and/ or for future job opportunities within MANFIELD and/ or with the client(s) of MANFIELD. If you wish to withdraw your consent, please notify us. Kindly visit our company website for more information on the Privacy Policy.

Job Description & Requirements

Successful candidate will assist Service Manager on the following tasks:

• Site daily operations, routine/ad-hoc maintenance and service work for industrial water treatment systems in semiconductor and pharmaceutical industries.
• Conduct routine equipment inspection, performance checking/review, data collection, repair and trouble-shooting of industrial pure water and wastewater systems.
• Perform regular PM /calibration for equipment and instruments.
• Any other duties given by Service Manager.

Skills and Experience:

• Degree/Diploma/Certificate in Chemical, Environmental or Mechanical Engineering.
• Preferably with 3-5 years of related experience in operations for industrial water treatment systems.
• Must be a hands on person
• A team player that is willing to work with different age groups and nationalities.

• Middleware Application Installation expertise across different platforms like JBOSS, WebLogic, WebSphere
• Hands on experience in setup of Web Server components like Apace, NGNIX
• Knowledge to build software components using source code compilation like Apache etc.
• Good understanding and hands on knowledge of SSL and other application authentication mechanism like 1 Way SSL , 2 Way SSL , UFW etc. setup and configuration
• Good knowledge and experience in understanding the network topologies that are required to be incorporated across different tier of architecture
• Good knowledge of Oracle database and RAC setup , and the configuration setup required across application layer for the connectivity
• Ability to work on identification of vulnerabilities and fix them
• Ability to work on upgrades of systems/components under obsolescence
• Experience with a variety of source control tools (GIT, Aldon, ClearCase)
• Experience in setting up servers
• Experience in working with MQ
• Experience in CI/CD Tools (Jenkins)
• Experience in build tools (ANT, Maven, Gradle)
• Experience in Unix, shell scripting
• Knowledge on release management processes
• Precise attention to detail
• Ability to prioritize tasks
• Ability to work under pressure
• Problem solving skills
• A passion for learning and the willingness to solve problems
• Experience working in Docker, Open Shift, ICP (Container Management Solutions)
• Experience working with Aldon and Clearcase
• Experience working with Ansible
• Unquestionable team communication skills
• Deliver new infrastructure setup for new project
• Support and deliver new changes for BAU systems
• Take accountability to deliver the scope on-time with high quality. Exercise judgment, take initiative
• Deliver solutions that meet and exceed the technical, infrastructure and security requirements
• Work effectively with the with the internal IT and Security Teams to ensure efficiency of the solutions implemented to support the business
• Drive standardization, componentization and consistency to implement a sustainable platform to rollout to regional countries

Job Requirements:

• Degree with at least 8-10 years of technical experience
• Minimum 8-10 years of experience on release and deployment
• Middleware Application Installation expertise across different platforms like JBOSS, WebLogic, WebSphere
• Hands on experience in setup of Web Server components like Apace, NGNIX
• Knowledge to build software components using source code compilation like Apache etc.
• Good understanding and hands on knowledge of SSL and other application authentication mechanism like JWT , UFW etc. setup and configuration
• Good knowledge and experience in understanding the network topologies that are required to be incorporated across different tier of architecture
• Good knowledge of Oracle database and RAC setup , and the configuration setup required across application layer for the connectivity
• Ability to work on identification of vulnerabilities and fix them
• Ability to work on upgrades of systems/components under obsolescence
• Experience with a variety of source control tools (GIT, Aldon, ClearCase)
• Experience in setting up servers
• Experience in working with MQ
• Experience in CI/CD Tools (Jenkins)
• Experience in build tools (ANT, Maven, Gradle)
• Experience in Unix, shell scripting
• Knowledge on release management processes
• Precise attention to detail
• Ability to prioritize tasks
• Ability to work under pressure
• Problem solving skills
• A passion for learning and the willingness to solve problems
• Unquestionable team communication skills

Key Responsibilities:

• ETL Development:Design, implement, and maintain ETL jobs using the Talend ETL toolset.
  Extract and transform data from sources like Cloudera, PostgreSQL, and SQL Server databases.
  
• Database Management:Develop and manage database tables with appropriate constraints to meet project requirements.
  
• Collaboration & Understanding:Work with team members to understand source system structures, data retrieval techniques, and organizational tools.
  
• Data Transformation & Quality:Support the development of data transformation logic using ETL tools or scripting languages (e.g., SQL, Python).
  Clean, validate, and transform data to conform to target schemas and quality standards.
  Contribute to data quality improvement initiatives.
  
• Troubleshooting & Support:Participate in troubleshooting activities to ensure data integrity and process efficiency.
  

Qualifications:

Technical Skills:

• Proficiency with Talend, Python, and Spark.
• Hands-on experience with databases and Hadoop ecosystem components such as Hive, Impala.
• Strong understanding of data warehousing and data modeling techniques.
• Familiarity with visualization and analytics tools.

Soft Skills:

• Excellent interpersonal and communication skills for effective interaction with clients and team members.
• Strong team player with a positive attitude.

Education:

• A degree in Computer Science, Mathematics, or Engineering is required.

Job Description

• Manage and supervise major construction supervision as RE of building works and civil infrastructure,involving site inspection, meetings and review of drawings and method statements in accordance to customer specifications, applicable codes, standards and other generally accepted practices.
• Carry out independent design checks for temporary falsework and formwork support system
• Keep quality records of all works, monitor and report on work progress
• Review and comment on contractor's submissions.
• To review and supervise safety, environmental and health matters.
• Station full-time on site to support Senior Resident Engineers (SRE) and the QP(S) with projects.
• Possess Degree in Civil Engineering recognized by PEB and registered with IES as Resident Engineer

Job Requirements

• At least 5 years of MRT Project Experience or Civil/Structural works.
• Has good working knowledge of Civil and M&E works and Strong knowledge of Singapore building codes, regulations, and standards.
• Proficiency in project management and construction supervision.
• Excellent communication and interpersonal skills.
• Good analytical ability with strong verbal and written communication skills

MAJOR RESPONSIBILITIES:

1) Execution of projects:

Ensure the successful and timely execution of projects professionally and strictly within the budgetary

cost and contractual completion time given by the Sales Department.

Ensure the accurate documentation of all activities/transactions.

Preparation of Bill of Materials (BOM)/production order before commencement of kick-off meeting.

2) Payment:

Check with the Sales Department about the down payment, LC, or other payment methods before the commencement of procurement of items.

3) Workshop Drawings:

After populating the BOM with all the items, work with the Design Department on generating Workshop Drawings (GA / P&ID / Electrical drawings).

Obtain the client’s official approval on all drawings before

any commencement of works.

4) Engineering:

Check the correct sizing of components (e.g. motors, pumps, valves & instrumentations).

In case of any changes, ensure other related

components are correctly sized.

5) Master Production:

Update the Master Production Schedule (MPS) and inform relevant departments of the strict compliance with the delivery schedule, in consultation with the GM.

6) Kick-off Meeting:

Mini-lead project kick-off meeting for the dedicated

projects handled with all critical information established (e.g. BOM, Gantt chart, lead time)

7) Lead Time:

Consistent follow-ups and confirmation from the Procurement Department on the ETA especially lead-time and technical specifications with the help of the Design team.

Communicate with customers in case of any changes after discussion with the Sales Department, if authorized by GM.

8) Factory Acceptance Test

(FAT)

Attend together with the Engineering Department to ensure complete factory testing is accomplished before generating the in-house testing reports as records for the client before delivery of the project.

9) Site Visit / Meeting: If necessary, attend and write minutes of the meeting for recording purposes at the site; and insert these in Project

File, provided site meetings are held.

10) Sub-contractor: Engagement and coordination with sub-contractors services upon approval of GM for any ongoing projects.

Ensure the quality of sub-contractor work is strictly according to requirements.

Responsibilities:

• Assist the Project Manager in project planning and to co-ordinate and oversee all works on the site
• Monitor & co-ordinate the works with supervisors
• Handling of technical and engineering problems
• Assist in planning, programming and monitoring of construction works progress
• Liaison with client's representative, relevant authorities and consultants
• Identify and assess any foreseeable risk arising from the workplace or work processes, minimise environmental impact associated with the construction activities
• Take reasonable practical measures to eliminate any foreseeable risk to any person who is at the workplace
• Ensure safe work procedures and environmental control measures are implemented at the work site

Requirements:

• Diploma /Degree in Civil Engineering
• Able to operate MS Project
• Proactive with excellent interpersonal skills and analytical abilities

Environmental Strategy and Compliance

• Supports and execute the implementation of EHS strategies and initiatives that align with the overall business strategy/ plan.
• Manage site’s EHS protocols; including fire safety matters to the requirements of site & corporate directives, local legislations and other requirements (i.e. REACH, RoHS, Conflict of Minerals, OHSA and etc.)
• Follow up mandatory notifications with regards to licenses/ permits and relevant WSH reports (i.e. iReporting, Medical Examinations submissions etc.) to ensure compliance with relevant legal regulations related to our factory operations.
• Implement operational management practices in line with ISO14001/ 45001 standards, including document management, record storage, and emergency response.

Consultant and Government Coordination

• Select and collaborate with EHS consultants as needed.
• Support on-time renewal of all licenses and permit without any lapse.
• Aggregate and report environmental impact data in accordance to ISO14001 Standards and Corporate Directives
• Sustenance of EHS rules and regulations with respect to the additions, changes and reviews by local mandatory Agencies for compliance and governance.
• Manage incident reports and ensure follow-up actions (reactive/preventive) are implemented.
• Manage EHS documentation and ensure up-to-date.
• Respond to EHS-related questionnaires from customers and government agencies.

Environmental Health and Safety Facilities Management

• Oversee the management of EHS facilities, including renewable energy installations.
• Develop specifications, request price quotes, and prepare proposal documents for EHS projects.
• Supervise addition/ alteration works within the facility; with regards to safety and health management, inspections and audits.
• Organize monthly EHS committee meeting and EHS inspections
• Develop and conduct EHS&F trainings, liaise training schedule with operations team and facilitate trainings as required.

Industrial Waste Management

• Manage operations related to industrial waste, ensuring proper handling and disposal.

EHS Policies and ESG Initiatives

• Collaborate, Develop and implement essential Environmental, Health, and Safety (EHS) policies and procedures to meet regulatory and industry standards.
• Supports the Environmental, Social, and Governance (ESG) initiatives, focusing on sustainability projects and reporting.

International Collaboration and Risk Management

• Collaborate with international factory teams to conduct risk assessments, improve emergency response protocols, and investigate incidents to prevent future occurrences.
• Lead and manage Risk Assessment (RA) teams; including reviewing, control and maintenance of RA reports.
• Support the operations in identifying, assessing any foreseeable risk arising from the workplace or process, risk management and consulting

Project and Mechanical Improvement Management

• Oversee project management for new buildings and facilities, including redevelopment projects.
• Implement mechanical improvement projects by planning, procuring contracts, and executing upgrades to mechanical services infrastructure in a safe, efficient, and cost-effective manner.
• Manage contractors undertaking new and/ or improvement projects and maintenance/ service term contractors. This shall include the monitoring of the contractor’s performance and administration from start till the completion of work.
• Handle and manage contractors, and their deliverables according to requirements, approved quotation &/or agreement.

Perform any other daily administrative tasks but not limited to the above, which may vary based on daily situations and needs.

ENGIE Services Singapore is a leading provider of Integrated Facilities Management solutions (IFM), property management, operations and maintenance, specialized rail engineering works, sustainable solutions and FM Consultancy services. With strong presence in various counties across South East Asia, we operate across mission-critical industries - aviation, transportation, healthcare, education, government and commercial.

ENGIE understands the integrated role of facility management and the value of it can be expanded beyond the traditional approach. As a total FM, specialized engineering and sustainable real estate solutions service provider, ENGIE offers a comprehensive range of technical, digital and support services customisable to best suit your unique needs.

Responsibilities

• Responsible for the operation of the fault reporting centre
• Investigate, analyse and determine root cause and report breakdowns and faults effectively.
• Liaise with contractors for rectification and/or ad-hoc works.
• Manage and assign Corrective Maintenance (CM) and Preventive Maintenance Work order (PM)
• Ensure all works are carried out safely and/or in accordance with safety procedures.
• Provide technical advice and assistance on all maintenance functions.
• Prepare technical reports and proposals on breakdowns
• Provide training and guidance to the staff

Requirements

• Degree in Engineering/Facility Management
• At least 2 years of relevant experience
• Good communication skills, positive mindset
• Hardworking and able to multi-task
• Customer service oriented mindset
• Has a good safety mindset and displays good WSH behaviour

Facility operation

• Support in managing the manufacturing and R&D facilities of an FCBGA substrate factory to ensure world-class facilities.
• Support in maintaining smooth operation and maintenance of critical system including:
• Clean room environment management
• HVAC, exhaust, and related mechanical systems, including scrubbers
• Electrical systems (high voltage and low voltage)
• Process cooling water systems
• Pure water, wastewater treatment, and reclaim plant operations
• Chemical delivery systems (e.g., resist, plating/developing solutions, stripping, etching, flux cleaning) and bulk gas (e.g., nitrogen) delivery
• Building management and maintenance
• Support in maintaining continuous supply of utilities and ensuring all facilities meet performance specifications to ensure uninterrupted operations.
• Support utility / process / system energy efficiency program – compilation of data, analysis of data and recommendation to stakeholders to reduce wastage or find alternative energy efficient methodology
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance.

Project Coordination and Construction

• Coordinate with main contractors, consultants, business units, and other stakeholders to oversee the construction and setup of facility projects.

Performance and Improvement

• Achieving key performance indicators (KPIs) set by your departmental head to sustain top-tier facilities systems.
• Overseeing projects for upgrading, expanding, and improving system reliability, reducing operational costs, and safeguarding company assets.

Team Development and Management

• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup

Facilities Budget Management

• Support in the plan, forecast, and manage budgets and cost control for facility operations.

Energy and Space Management

• Support in managing energy consumption, implement strategies to enhance energy efficiency, and reduce operational costs.
• Support in implementation of EnMS (Energy Management System) for monitoring, controlling and conserving energy use in our building or organization.

Documentation and Quality Control

• Ensure historical data is documented for traceability and maintain and regularly update line drawings.
• Support in developing and implementing methods and priorities to ensure optimal facility performance and avoid unscheduled interruptions.
• Support in developing and implementing documentation systems that comply with QS 9000 and ISO 14001 standards.

Continuous Improvement and Methodologies

• Utilize methodologies such as FMEA, SPC, DOE, and PDCA to train employees, enhance problem-solving skills, and improve work methods.

Safety and Security

• Support in creating and enforcing safe work procedures and security policies to protect personnel and property.
• Support in Implementing strict safety rules and managing physical security measures, access control, and surveillance.

Preventive Maintenance

• Creating and executing a master schedule for preventive maintenance.

Perform any other daily administrative tasks but not limited to the above, which may vary based on daily situations and needs.