Responsibilities:

• Identifies, troubleshoot problems and performs root cause analysis study of equipment failures, recurring breakdown, and equipment defects in order to take effective corrective and preventive
• Liaises closely with Engineering on technical specifications required for machinery fitting, documenting the project requirements for the arrangement of machinery, equipment and system installation work
• Assists with the preparation of procedures, risk assessment, HSE work method statement and etc. under the supervision of senior team members and Project Manager to ensure all the requirements have been fulfilled
• Prepares job-list, work schedule and planning of manpower resources (i.e. yard and contractors) and facilities, working closely with the team members
• Participates in project meeting with Project team members and stakeholders to note on project specifications and report on the status of the work progress
• Liaises closely with HSE department and subcontractors for proper on-site coordination, working with QA/QC team members, owners, statutory and classification authorities on inspection arrangement and compliance review
• Maintains the equipment/ machineries at the workshop and on-board, ensuring the proper working condition, timely calibration, repair, or servicing as required
• Understands emerging engineering practices by participating in educational opportunities, professional organisations; reading professional publications and maintaining personal networks
• Recommends changes to work method/ process by reviewing the workflow and work process to implement changes for improvement and to achieve operational effectiveness and functionality

Requirements:

• Bachelor’s degree in Mechanical Engineering/ Marine Engineering or related engineering disciplines
• Entry Level candidates are welcome to apply (On Job Training will be provided)
• Excellent proficiency in English (written and spoken)
• Must be able to board ships, enter confined spaces with limited visibility and have the ability to climb up and down stairs and/or ladders of varying heights.
• Good in planning, organizing, and interpersonal skills and able to work independently

Working hours & locations:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide Transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Help us get ahead of disease together with our GSK Biologics Tuas Business Area

Education required: BS degree from an accredited college/university, preferably in Mechanical or Chemical Engineering discipline with a focus in Process equipment reliability and maintenance

Language requirement: Written and spoken fluency in English

Expected Start date: Immediately

Application deadline: We will close this vacancy when we have enough applications, so please apply as soon as you can so your application can be considered.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

What will you do?

Involve in and not limited to:

Maintenance and Calibration Project, Improvement in process reliability, Equipment troubleshooting, Qualification of new equipment, SOP amendment due to periodic review/CAPA and Continuous improvement Programme.

What will you learn?

You will be expose to but not limited to:

• The different type of equipment that are used for Vaccines manufacturing.
• How the equipment functions and the impact of each equipment have on the production system.
• Liaising with external contractors and vendors for equipment issues and projects.
• Liaising with above site (GSK sister plant outside Tuas) for sharing issue or requesting for support.
• Working closely with quality and production department on understanding problems that are contributed by process equipment.
• Understanding and using the different type of modules in SAP for routine and ad-hoc activities.
• Deeper understanding the requirements of a Vaccines site on producing vaccines.

What are we looking for?

• A lively interest in vaccines manufacturing, the commercial world and the biopharma industry
• Appetite to work as a business partner, building strong relationships with key stakeholders
• Adaptability to change and working under pressure
• Excellent communication skills that help you influence
• Strong problem-solving skills driven by curiosity
• Drive and confidence to trust your own judgment
• Great project management skills and the ability to prioritise

What do we offer you?

• Understand and experience the GSK Culture
• Work with a diversified team of professionals
• Implement technical knowledge and skills that you have acquired at school
• Apply and develop soft skills such as interpersonal, communications and negotiation skills
• Transport to and from site to MRT stations in centralised locations all across Singapore (only for manufacturing sites)

JOB RESPONSIBILITY

• Find tender opportunities GeBIZE.

• Prepare Tender and submission.

• Familiar with reinstatement and maintenance work.

• Review and analysis of Tenders Drawings & Documentation.

• Preparing Tender submissions and reviewing Procurement & Reviewing of Contracts, and ensuring compliance.

• Reviewing and commercial management of all projects, to ensure accurate and reliable reporting.

• Review all incoming correspondence from Clients, Consultants & Design Team to identify contractually critical items and to initiate replies.

• Estimating a range of projects in a variety of sectors.

• Improve and implement best practice commercial processes and accurate budgeting.

• Maintain accurate records and provide necessary detailed backup to support commercial tracking and costing.

• On Site measurement of Electrical Services.

• Preparation of specialist sub-contract work packages.

• Preparing monthly Commercial Progress reports.

• Other ad-hoc duties assigned by Construction Manager.

• Marine & Offshore industry
• Basic $3000 - $4200
• 5 days (8.30am – 6.00pm)
• Location: West Area
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Design control systems
• Preparation of drawings for customer approval
• Preparation of drawings/BCM for shop floor production
• Co-ordinating with clients, consultants and internal department.
• Drafting work with use of CAD system (AUTOCAD/SOLIDWORKS).

Qualifications

• Min Diploma/ Degree in Electrical with no working experience are also welcome.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Job Description:

1. Implement and execute preventive and breakdown maintenance work for electrical and instrumentation related tasks with focus on safety.
2. Perform electrical and Instrumentation troubleshooting.
3. Able to work and trouble shoot with AC low voltage single phase and 3 phase systems.
4. Identify and maintain an optimum level of electrical spares and drives to reduce plant downtime, take drive parameters back up and need to maintain.
5. Ensure systematic documentation of Maintenance Procedures and Risk Assessments, SLD, E&I related and maintenance records for troubleshooting purpose.
6. Experience in 3 phase generator control interfacing to grid power.
7. Liaise with PE and organize preventive maintenance for MV and high voltage (22Kva).
8. Understand and develop electrical panel schematics if needed.
9. Guide technician on troubleshooting part if needed for ACMV, CCTV, Access control system, PA system, power and lighting.
10. Update and control of Electrical specification, procedure and drawings
11. Material Management including consumables, parts and spare unit
12. Responding to breakdowns, diagnosing faults, record and report.
13. Review and approve of service, repair and overhaul equipment, record and report.
14. Managing routine 5S at the maintenance workshop, store and work area at site.
15. Communicate with clients, consultants, project personnel and relevant authorities.

Job Requirements:

1. Degree in Electrical Engineering or Instrumentation / Maintenance Engineering.
2. At least 3 years of experience in electrical engineering in chemical, petrochemical, pharmaceutical and power plant operations.
3. Strong Electrical Knowledge.
4. Results oriented individual with robust technical abilities.Able to work independently and in a team.
5. Possession of LEW is an advantage.
6. Knowledge of preventative maintenance systems and their administration.
7. Knowledge of Maintenance and Asset Management is an advantage.

Others:

1. Working hours: Monday to Friday (8am to 5pm)
2. Company Transport / Transport Allowance $120 if candidate possess own vehicle to work
3. Sign-On Bonus

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Senior Engineer – Mechanical (Building Services) to join our Building Services team in Singapore.

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

• Leading mechanical services (HVAC) design for building projects
• Assume responsibility and undertake engineering tasks of increasing scope and complexity
• Responsible for analysis of information, production of design, tenders, proposals and technical report writing
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants
• In charge of jobs control, planning, monitoring, progress and job cost reporting
• Communicate effectively with the client, sub-consultants, contractors, and other parties relevant to the job
• Assist in assessment and review of designs prepared by others on behalf of the clients
• Liaise with authorities on plans submission and compliance

Pre-Requisites

• Degree in Mechanical Engineering
• At least 5 years experiences in consulting firm
• Leading roles experience in ventilation & air-conditioning (HVAC, Plumbing & Drainage) design & design management of commercial, healthcare or school projects will be an advantage
• Competent user of relevant engineering software, Building Information Modelling and Navisworks
• Excellent written & spoken communication skills in English
• Able to work independently & exercise initiative
• Excellent delegation and communication skills, which see you enlist the help of others to meet objectives
• A team, client and delivery focused working style

Job Highlights

• Career Advancement
• Medical & Telecommunication Allowance
• AWS, Variable Bonus

Ready to make a move?

We offer a comprehensive career growth and professional development opportunities along with a supportive and caring work environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply online now with your CV.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

We are seeking an Assistant Marine Engineer (Shore-Based) to support the maintenance, repair, and operation of marine systems and equipment. You will assist in coordinating technical services, overseeing compliance with maritime standards, and ensuring vessel readiness from a shore-based perspective.

Key Responsibilities:

• Assist in planning and supervising maintenance and repair activities for vessels.
• Monitor and ensure compliance with maritime regulations and safety standards.
• Conduct technical inspections and troubleshoot marine systems as needed.
• Coordinate with vendors, suppliers, and ship crews for timely parts procurement and service.
• Prepare technical reports and documentation on vessel performance and maintenance.

Requirements:

• Bachelor’s degree in Marine Engineering or equivalent.
• 5-10 years of experience in marine engineering or a related field (shore-based experience preferred).
• Knowledge of maritime regulations and safety standards (e.g., IMO, SOLAS).
• Strong problem-solving and communication skills.
• Proficiency in using technical software and tools relevant to marine engineering.
• Willingness to travel occasionally for inspections and project oversight.

Job Description

• Oversee in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Manage ACMV design coordination with other trades with BIM coordination.
• Liaise with ACMV suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for ACMV equipment and materials to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required.
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based ACMV experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in ACMV calculations including heat load, pump sizing, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Experience of design and coordination skill.
• Familiar to ACMV, Green Mark and fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage.

Able to assist in tender pricing of ACMV project/ Alteration & Additional Work.

2. Data Entry for the project material delivery, Bill of Quantity and Tender Pricing.

3. Serves as liaison between the user and in-house contractor on all ACMV related system.

4. Provide sizing and design of ACMV system (chilled water) for individual room

5. Coordinate with supplier / sub-contractor of the tender specification and obtain the quotation from them

6. Control and supervise workmen to make sure standards of building performance, quality, time and cost schedules, and safety are complied.

7. Responsible for keeping daily work record, including additional work claims to the clients and from the subcontractors

About the Role:
We are seeking an AI Engineer specializing in NLP to join our core tech team. You will develop and refine NLP and speech recognition models to power our fintech solutions. Working side-by-side with Product, Backend, and overseas engineering counterparts, you will help bring cutting-edge language technologies to life, delivering improved user experiences and efficient operations.

Key Responsibilities:

• Model Development: Design, train, and optimize NLP models (e.g., language models, entity recognition, sentiment analysis) using Python and frameworks like TensorFlow or PyTorch.
• Algorithm Innovation: Explore and implement state-of-the-art NLP techniques, keeping current with research and best practices in the industry.
• Data Pipeline & Integration: Collaborate with Backend Developers and overseas engineering teams to integrate AI models into production environments, ensuring scalability and performance.
• Performance Tuning & Evaluation: Continuously evaluate model performance, conduct error analysis, and fine-tune algorithms to meet product and business objectives.
• Documentation & Knowledge Sharing: Document your work comprehensively, and mentor or guide team members in AI best practices as needed.

Qualifications:

• Experience: 3-5 years in AI/ML engineering, with demonstrated experience in NLP projects.
• Technical Skills: Proficient in Python and familiar with machine learning frameworks (TensorFlow, PyTorch). Experience with modern NLP techniques (e.g., Transformers) is a plus.
• Problem-Solving: Ability to translate complex problems into technical solutions and optimize models for real-world fintech applications.
• Teamwork: Strong collaboration skills to work effectively with cross-functional teams, including product and overseas engineering partners.
• Able to communicate in mandarin to work with chinese-speaking counterparts.

1. Design and Planning

• Review and interpret electrical designs, blueprints, and technical drawings.
• Coordinate with design engineers, architects, and other stakeholders to ensure that electrical plans align with project requirements.
• Propose modifications or improvements to electrical systems to enhance efficiency or safety.

2. Installation and Supervision

• Oversee the installation of electrical systems, equipment, and fixtures, ensuring compliance with standards and specifications.
• Supervise electricians, technicians, and subcontractors to ensure proper execution of tasks.
• Plan and allocate resources, including manpower, tools, and materials.

3. Quality Assurance and Compliance

• Ensure that all electrical work complies with local codes, standards, and regulations (e.g., NEC, IEC).
• Conduct regular inspections and audits to ensure quality and adherence to safety protocols.
• Test and commission electrical systems to confirm functionality and performance.

4. Troubleshooting and Maintenance

• Identify and resolve issues with electrical systems during installation or operation.
• Develop and implement preventive maintenance schedules for electrical equipment.
• Prepare troubleshooting guides and provide technical support as needed.

5. Safety Management

• Enforce safety protocols and ensure the use of appropriate Personal Protective Equipment (PPE).
• Conduct risk assessments to identify and mitigate hazards related to electrical works.
• Train staff on electrical safety and emergency response procedures.

6. Documentation and Reporting

• Maintain detailed records of electrical installations, inspections, and maintenance activities.
• Prepare daily progress reports, test reports, and as-built documentation.
• Report project progress and issues to the project manager or higher management.

7. Budget and Cost Control

• Estimate costs for electrical components and systems.
• Monitor project expenditures to ensure that electrical work stays within the budget.
• Suggest cost-effective solutions without compromising quality or safety.

8. Coordination and Communication

• Collaborate with other engineering disciplines to integrate electrical systems into the overall project.
• Communicate effectively with stakeholders, including clients, contractors, and suppliers.
• Attend project meetings and provide updates on electrical works.

9. Problem-Solving and Innovation

• Propose innovative solutions to overcome challenges during project execution.
• Stay updated on advancements in electrical engineering and incorporate new technologies where applicable.

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

PRIMARY FUNCTION:

• Responsible for overseeing the Operation and Maintenance of assigned Utility systems including: Non-GMP and GMP Utilities and Non-GMP and GMP HVAC equipment; including but not limited to other equipment: Boilers, Chillers, Air compressors, Building Management System, CO2, N2, Effluent Treatment Plant, Water Treatment.
• Accountable for Operation, Maintenance and monitoring regimes and play a key role in improving Utilities reliability rates, maintaining compliance, providing for a safe work environment, and controlling costs of the Utilities operations.
• To provide support to ongoing plant operations on a 24 x 7 basis and ensure total compliance to regulatory, cGMP and Environment, Health and Safety (EHS) standards
• Supervise contractors, and technicians and provide day to day operational support and maintenance services including, modifications and changes to processes and equipment, troubleshooting, deviation investigation, identification, and completion of corrective and preventative actions.
• Oversee the day-to-day operations and routine/ breakdown maintenance of Utilities Equipment systems
• Maintain operations and maintenance records to comply with regulatory, cGMP and EHS requirements.
• Take ownership of utility systems as the Subject Matter Expert
• Participate in corporate, regulatory, cGMP, EHS and other internal/ external audits as required by the management.
• Analyze technical problems in the utility and manufacturing areas and develop both short term and long-term recommendations for their correction. Lead or assist cross-functional teams in finding solutions to technical problems.
• Actively engaged in developing specifications for equipment and utility systems and assist in FAT/ SAT of related equipment as part of the new buildouts
• Participates in vendor bid solicitation, selection and contract management.
• Responsible for the performance of preventative & repair maintenance of utility system equipment, periodic inspections of utility systems to ensure proper operation, and daily checks/repairs in compliance with Standard Operating Procedures (SOPs).
• Analyze trends and identify issues and improvement opportunities proactively.
• Coaching and mentoring of Technicians in the execution of routine operations and maintenance works.
• Ensure that contractors are delivering quality services.
• Ensure that all internal customer demands are being met.
• Compliance with local regulatory laws is also required.

MAJOR RESPONSIBILITIES:

• Responsible for overseeing the Operation and Maintenance of assigned Utility systems including Non-GMP and GMP Utilities and Non-GMP and GMP HVAC equipment; including but not limited to other equipment: Boilers, Chillers, Air compressors, Building Management System, CO2, N2, Effluent Treatment Plant, Water Treatment.
• Responsible for developing the standard operating procedures, implementing of preventive and predictive maintenance, calibration program to ensure utilities equipment are maintained to thehighest level of Safety & Quality. This includes routine and plant major shut down activities.
• Responsible for support and execution of equipment qualification such as commissioning, IQ/ OQ/ PQ.
• Lead a team of technicians and contractors for day-to-day utilities operations to ensure zero
• downtime of utilities systems and drive continuous improvement projects/ initiatives.
• Preparing operation and maintenance zero base budget.
• Carry out other work or task as directed by Manager.

REQUIREMENTS:

• Bachelor of Engineering Degree in Mechanical/ Electrical/ Chemical/ Engineering or related discipline
• MOM certified Steam Engineer Certification preferred
• Minimum 3 years of relevant experience in Utilities/Mechanical/Maintenance/Electrical engineering related positions
• Hands-on experience in routine operations, maintenance, engineering design, start-up, and commissioning of the relevant Utilities Discipline
• Knowledge of cGMP is highly preferred
• Good planning and supervisory and strong interpersonal skills.
• Good contractor management skills.
• Mentoring and coaching skills.
• Excellent leadership and communication skills
• Green belt certification preferred.

*Kindly note this position is based in Tuas.

• Degree/ Diploma/ Certificate in electrical & electronic engineering (AC & DC motors, lead acid & lithium batteries, electrical control circuits)

• years of hand on troubleshooting experience

• customer support experience

• ability to work as part of a team and possess strong communication skills

• local driving licence is a plus

Project Design & Engineering Calculations and Proposal drawings to Client Management.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as per Equipment sample or Site measurement studies

Analyse sub-contractor proposals, design and calculation feasibility study.

Coordinate with Government and various agencies.

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Manpower planning, deployment and control and on-time schedule.

Coordinate to resolve engineering and construction issues and manage the schedule.

Safety mindset and ability to develop RA and permit to work application.

Maintain proper project documentation and ensure accuracy of all design submissions to comply with project specifications and clients’ requirements.

Monitoring of site activities, material requisition, cost control, project supervision and schedule of works

Ensure that works are executed within an acceptable standard of workmanship and in line with safety procedures

Understand and ensure compliance in project requirement and scope of work

Issuing of material requisition form, assist in purchasing materials/items required by production/customers, prepare marketing material & etc.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Any adhoc duties as assigned by management.

Min 3-5 years’ of experience in Engineering mfg, Recycling, Oil & Gas and Chemical plant industry.

Applicable for Only Singaporeans & PR's.

Job Description:

Are you ready to revolutionize the future of water and wastewater treatment systems while enjoying flexibility in your work environment? Join our innovative team and make a difference in shaping sustainable solutions for various industries. As a valued team member, you will:

• Contribute to the design of cutting-edge water and wastewater treatment systems throughout the tendering and project stages, leveraging your expertise to drive impactful change.
• Prepare meticulous documents and drawings, including Flow diagrams, GA, and technical specifications, ensuring precision and adherence to standards.
• Lead detailed engineering efforts for secured projects, crafting comprehensive plans encompassing PFD, PID, technical specifications, process descriptions, and control philosophies.
• Assess engineering requirements meticulously, from equipment sizing and material selection to piping specifications, ensuring optimal process functionality.
• Collaborate seamlessly within a team to craft compelling commercial and technical submissions for tenders and proposals, engaging with clients and suppliers to deliver outstanding results.
• Facilitate technical discussions and clarifications with stakeholders, fostering effective communication and alignment.
• Contribute to testing and commissioning activities, ensuring project success and client satisfaction.
• Support the preparation of operation and maintenance manuals, ensuring seamless project handover and continued excellence.

Requirements:

• Hold a Diploma or Degree in Engineering Discipline or Environmental Science.
• Possess a minimum of 4-6 years of experience in process design for wastewater industries; senior positions available for candidates with extensive experience.
• Demonstrate proficiency in Aerobic/Anerobic processes, membrane technology (UF, MBR), and sludge handling applications in water/wastewater treatment.
• Exhibit self-drive, results orientation, and the ability to excel both independently and collaboratively within a team.
• Fluent in Mandarin to facilitate effective communication with Chinese clients and vendors.
• Prefer immediate availability or a short notice period.
• Must hold Singaporean citizenship.

Other info:

Work hours: 9.00am to 6.00pm, Monday to Friday.

Medical and Dental Benefits

Insurance

Embark on a rewarding career journey with us and be at the forefront of shaping a cleaner, more sustainable world. Apply now to join our dynamic team!

Project Design & Engineering Calculations and Proposal drawings to Client.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as Equipment sample or Site measurement studies

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Schedule the project in logical steps and budget time required to meet deadlines.

Site & office project management and daily operations including Engineering Design, Drawing and Fabrication, inspections, site measurements and handover to client’s.

Attend Site meeting, Equipment rectification in assembly and dismantling when required.

Overall project planning, scheduling, monitoring, and updating to meet project completion targets.

Liaison and meeting with client's representatives, relevant authorities, and consultants.

Site co-ordination, monitoring and report work progress.

Flair in design; able to sketch fast and produce good design concept

Coordinate all new and current on-going projects and able to communicate well with all levels

Review M&E Design Drawings and ensure compliance with design specifications and guidelines. Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions.

Review incoming engineering, ISO piping drawings and assess impact of extra work or changes on schedule.

Ensure all regulatory and statutory requirements regarding testing and record keeping are met.

Supervise and coordinate M&E and Mechanical piping/equipment installation in accordance with approved drawings and materials. Coordinate M&E details with Clients, Consultants, Sub-contractors and other site staffs.

Monitor performance of multi-skilled craft workers in the installation, removal, or adjustment of equipment or components in accordance with established project procedures, requirements and specifications.

Monitor construction schedules, methods, manning charts, materials and equipment requirements.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Supervise electrical and instrumentation construction work as per IFC drawings.

Monitor construction schedules, methods, manning charts, material and equipment requirements.

Monitor the activities of contractors and subcontractors performing craftwork, ensuring compliance with project quality, safety, and security requirements.

Min 5-7 years’ of experience in Engineering related activities in Mfg, Recycle, Oil & Gas and Chemical plant industry.

Responsible for safety of supervised personnel; ensures that craft personnel comply with established safety policies and procedures, and that they practice safe work habits.

Applicable only for Singaporeans / PR's

The Service Engineer is responsible for carrying out after sales field service jobs including testing & commissioning, servicing, troubleshooting and overhaul of Ingersoll Rand’s air compressor at our installed bases. He/she will require technical knowledge of compressed air systems, customer orientation and strong ownership mindset to be successful in this role.

Responsibilities

• Perform installation, inspection, diagnose, maintenance and rectification on compressed air system at various commercial and industrial establishments.
• Conduct site and classroom training to customers on compressed air system.
• Recommend necessary actions to improve the efficiency and reliability of customer’s compressed air system.
• General service report writing for internal and external customers.
• Document and prepare field service quality reports. If there are quality problems, it is necessary to feedback specific product defects to the production department and assist customers to take corrective measures.
• Provide technical support for the Industrial Technologies & Services (ITS) products, including but not limited to Compressed Air System, Air Dryers System, Air Audit and IIOT system.

Basic Qualifications

• Degree in Mechanical/Electrical Engineering with strong field service experience in compressed air systems and PLC panel programming or related.
• Singapore Class 3 driving license.

Travel & Work Arrangements/Requirements

Office & Site-based within Singapore for field service jobs at installed bases.

Key Competencies

• Customer Orientation
• Ownership
• Independent
• Basic software applications such as Microsoft Office (e.g., Excel, Word, Outlook) and corporate systems (e.g., SAP).

What we Offer

• Equity Grant
• Employee Insurance
• Medical Health Screening
• Outpatient Medical & Specialist
• Dental
• Overtime & Allowances

Job Summary

The Sales Engineer will be based in Singapore and is accountable to generate profitable sales revenue and increase operating income by broadening sales coverage, establishing new accounts, and providing total solutions for compressed air to customers in Singapore.

Responsibilities

• Identify and source new clients and business prospects (e.g., perform outreach to cold leads via calls and emails).
• Achieve sales target set for area of responsibilities and industries by building and maintaining close relationships with customers (incl. customer visits) to solicit for orders.
• Negotiate tender, contract terms and condition and prepare Sales contract.
• Prepare sales report, analysing cost and sales, quotations and maintaining and creating new client accounts.
• Provide pre-sales technical assistance (incl. demonstration & technical presentations), product training and after-sales support.
• Attending trade shows, conferences, marketing, and other events.
• Work closely with supply chain management, sales support and project engineer and order fulfilment team.

Basic Qualifications

• Degree / Diploma in Mechanical Engineering or related fields.
• Sales experience with industrial products such as Air Compressors, Dryers, or other similar industrial equipment.

Travel & Work Arrangements/Requirements

Office-based, will be required to travel within Singapore to meet clients or overseas for business needs.

Key Competencies

• Customer Orientation
• Ownership
• Business Awareness

What we Offer

• Commissions
• Equity Grant
• Employee Insurance (Incl. Dependants)
• Medical Health Screening
• Outpatient Medical & Specialist
• Dental
• Annual, Sick, Hospitalisation, Marriage, Exam, Compassionate, Maternity, Volunteerism Leaves.

Job Description:

• Design FA project inclusive of tooling, artwork, material and process.
• Draft drawing for making of tooling and artwork.
• Liaise with suppliers regarding the making of tooling and artwork.
• Create job ticket which consists of material and process.
• Co-ordinate FA run with FA report submission
• Co-ordinate product transfer from US to Singapore facility.
• Develop and fabricate test jig/tool for testing of functionality of finish product.
• Maintain all test jig/ tool used in production.
• Perform product failure analysis, as well as reduce cost through yield improvement, cycle time reduction and process enhancement.
• Coordinate the Engineering Change Notice (ECN) process.
• Putting up sales quotation for the customer through the sales department.
• Any other task assigned

Requirements:

• Diploma in Electrical / Electronics / Mechanical or Microelectronics Engineering.
• Knowledge of 3D modeling software such as Pro/Engineer and AutoCAD.
• Need to be flexible on working hours as support over the weekends may be required.
• Must be a self-motivated team player with good presentation and communication skills
• Good project and time management capabilities

Responsibilities:

• Designs, plans, and handles testing, commissioning, software programming and supervision on site for BMS on project plan, specifications, and contract documents.
• Analyses plans, specifications, and contract to determine project requirements.
• Prepares submittals containing schematics, descriptions and technical literature as required. Maintains current design documents throughout project duration.
• Prepares engineering re-estimate reports and minimizes report variances.
• Perform testing & commissioning of BMS.
• HVAC experience and sequence of preparation for BMS
• Experience in BMS technical submittals preparation, method of statement, compliance statement and OMM.
• Experience in IO point schedules, assignments and materials selection with value engineering
• With logical knowledge in ACMV & HVAC system control logic.
• Network and MS office & project background knowledge is a must.
• Be aware of all kinds of risks and their controls in your work environment.
• Be a part of site EHS inspections, hazard/ risk assessments and recommend mitigation measures.
• Immediately inform the site EHS officer/site manager of any additional EHS risks.
  Stop the work if any unsafe conditions are identified.
• Project management skill required.

Requirements:

• Degree/ Diploma in Mechanical/ Electrical engineering or its equivalent

• Min 2 years related experience in HVAC/ BAS industry

• Strong customer management & problem solving skills

• Excellent communication & interpersonal skills

Addcel has been delivering deep value to clients across the Oil and Gas, Petrochemical, Energy, Pharmaceutical, Data Centers, Environmental Solutions and Infrastructure industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation such as structural steel, piping, storage tanks & silos as well as the equipment installation, we take pride and passion in all that we do.

The Project Engineer reports to the Project Manager and is responsible for the below:

• Prepare and submit required documents for Project, working with respective stack holders based on project proposal.
• Prepare and maintain the project document summary.
• Upon confirmation of project resources, update other stakeholders to prepare submission and record for final MDR.
• Prepare and follow up with Engineering and drawing related documents.
• Receive, review, update and issue latest revised drawing to project team.
• Prepare and monitor STQ / RFI for technical details.
• Preparation and updating of project schedule.
• Prepare and update Regular reports and Project Forecast.
• Base on approved layout and schematic drawings, prepare and update MTO upon approval from client.
• Escalate any abnormalities compared to bidding quantity to PM and procurement team.
• Update the revised MTO (material take off) to project team, ensuring material availability as well as manpower resources.
• Attend daily toolbox meeting.
• Update Project managers about the progress, plans and challenges.
• Assist in the preparation of the complete subcontract Scope of Work.
• Work with all stakeholders to ensure that we have the latest equipment connection drawings.
• Prepare, monitor and update status to procurement, and submit monthly progress claim.
• Record additional works and variation orders.
• Prepare variation claim with proposal team.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Engineering or equivalent.
• Min. 3 - 5 years of relevant working experience, preferably managing projects for Semi-con, Pharma & Oil & Gas.
• Proficient knowledge in AutoCAD software & Microsoft Office.
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Join us in adding value everyway and creating value everyday with pride and with passion!

Responsibilities:

· You will promote and propose Trane Chiller & Equipment to building consultants and contractors

· Responsible for developing long term customer relationships

· Building close business relationship with customers especially key accounts

· Maximizing account penetration and customer retention

· Identify potential opportunities & develop solutions with existing & new customers

· Update forecast timely into the system

· Negotiates value, addresses resistance, and close the sales. Differentiates & made Trane as preferred supplier

· Any other duties as assigned from time to time

· You also need to ensure all works carried out in accordance with the specified quality and EHS standards.

Requirement:

· Degree in Mechanical/ Electrical engineering or its equivalent

· 1-2 years in Engineering sales, experience in HVAC industry will be a plus

· Customer driven with excellent communication & interpersonal skills

· Candidates with the relevant education qualifications but no prior work experience is welcome to apply

Responsibilities:

• Promote and propose Trane Controls Solutions to building owners, consultants and contractors

• Develop long term customer relationships and maximize account penetration and customer retention

• Identify potential opportunities & develop solutions with existing & new customers

• Work closely with other department to promote package solution and enhance the win rate

• Ability to effectively writes and presents proposals.

• Negotiates value, addresses resistance and closes the sale. Differentiates & made Trane as preferred supplier.

• Ensure all works carried out in accordance with the specified quality and EHS standards.

Requirements:

• Diploma/ Degree in Mechanical/ Electrical engineering or its equivalent

• At least 1-3 years’ experience in selling HVAC or building automation system

• Good presentation, interpersonal and communication skills

• Customer driven mindset

Job Description

· Responsible for ensuring that assigned projects meet customer’s specs, strictly follow procedures and schedules

· Communicate and coordinate effectively with all relevant internal & external team members including contractors to ensure efficient completion of projects

· Review work procedures and highlight activities which may cause interruptions on the projects

· Closely supervise all contractors to execute tools services hook-up activities, ensure safety regulations practiced and monitor work quality performance

· Maintaining and modifying equipment to ensure that it is safe, reliable and efficient

· Liaise with clients on services requirement, schedule, reports and progress claims

· All other ad-hoc assignments assigned by Project Manager

Qualification

· Degree /Diploma in Mechanical Engineering

· At least 2 years of working experience

· Proficiency in Microsoft Project and Microsoft office and AutoCAD

· Highly analytical, meticulous, proactive and self-driven

· Strong team-player with excellent interpersonal and communication skills

· Able to work under pressure and in fast-paced environment

· Able to work collaboratively with others

· Able to start immediately

· Able to read and interpret P&ID.