Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

My clients are established mega consultant firm in town area

RESPONSIBILITIES

• Set design criteria, check design calculation and drawings for Electrical, ELV;
• Agree on design concepts with Team Leader
• Ensure concept and sketch designs are approved before progressing to the next stage;
• Assist in preparing fee proposals;
• Carry out feasibility work;
• Advise and report to the Team Leader and Division Manager, on the adequacy of the services; Formalize standards for specifications, drawings etc. in conjunction with Team Leaders and the Division Manager;
• Resolve any technical problems faced during the project design and/or construction stages; Investigate and recommend on engineering system selection;
• Handle all correspondences including reports, technical specifications, and other documents relating to the projects;
• Prepare and monitor cost and quantity estimates (assist for clarifications only);
• Attend design / site meetings;
• Assist Team Leader in internal staff management;
• Assist in business development activities;
• Senior engineers must be able to lead projects a team of engineers / technicians under their charge;
• Senior engineers must become fully familiar with coded and local Authority requirement; Other duties and responsibilities as reasonably required by the Team Leader /Division Manager. Requirements
• Degree in Electrical Engineering recognized by Professional Engineering Board. Master’s degree in building services engineering or equivalent will also be considered.
• (Senior Electrical) 7 years' experience in design consultancy within the MEP consultancy field. (Principal Electrical) 10 years' experience in design consultancy within the MEP consultancy field. Chartership membership with professional institutions is an advantage (CEng IEEE IET IES etc)
• Ability to articulate and present design ideas, and report to stakeholders independently.
• Experience in international airports and data centres are preferred. Good interpersonal and communication skills
• Candidates with Professional Engineer registered with PE boards are welcome to apply, salary package can be discussed

Responsibilities

• Understand user requirements and perform system analysis, design and document functional and system specifications.
• Design, develop, troubleshoot, test, document, and deploy new solutions quickly and reliably.
• Build the frontend and backend software, build business logics and APIs in the back-end to connect all systems and components together.
• Ensure the delivered applications follow security best practices and comply to enterprise security standards.
• Maintain and improve existing web applications
• Involve in both frontend and backend development
• Managing software team, guiding junior developers.
• Any other Ad Hoc duties as assigned

Job Requirements

• Degree/Diploma in software engineering or computer science or any related disciple
• Minimum of 2- 3 years of development experience in Java/J2EE, HTML, JSP, Javascript, JQuery, MS SQL, Oracle, Hibernate/JPA Struts, Spring, Spring Boot, Microservices, RESTful web services.
• Proactive, motivated and team player

Interested applicants, please Email , and look for

Jensen Fang Lifa

Recruit Express Pte Ltd

EA License No. 99C4599

EA Personnel Registration Number: R2197080

We regret that only shortlisted candidates will be contacted.

Airconditioning Engineers

1) Ability to lead and manage teams

2) Operation Supports to teams and clients

3) Self Motivated Individuals

4) Good Team Player

5) Experienece In Troubleshooting and Repair / Service of Split Type and VRF/ VRV systems

6) Valid Class 3 License

7) Minimum 5 years experience in Airconditioning Field

8) Possess field experience is a MUST

9) Strong troubleshooting and analytical skills

10) Prior experience working in MNCs Agent will be an advantage (I.E. Daikin, Mitsubishi, Toshiba)

Technical Talent Specialization

Design, Implementation and Operational cloud services AWS, Microsoft Azure

Administrate, configure and troubleshoot Redhat Linux OS and applications in Linux environments.

Design, Implimentation and Operational cloud services AWS, Microsoft Azure

Administrate, configure and troubleshoot Linux OS and applications in Linux environments. Experience in IaC Terraform Deployment and Managment.

Working experience with ECS and EKS in AWS.

Experience in Redhat Linux Operating Systems Experience in RHEL System

Administration,Deployment and Upgrades,System Automation and Scripting,Security and Compliance

Certification require:

1) AWS or Azure Cloud Certification

About our client:

Our client is Reputed MNC.

Responsibilities:

Responsible for deploying new servers for both UAT and Production environments. This role requires a strong understanding of server hardware, network connectivity, and virtualization technologies.

• Deploy new PowerEdge servers for in both UAT and Production environments.
• Coordinate the smooth delivery of PowerEdge servers.
• Ensure DC rack readiness for server deployment.
• Rack and stack servers, power up, and perform power tests.
• Collaborate with the network team to ensure correct connectivity.
• Install and configure new servers, including firmware, BIOS configuration, ESXi installation, and VMware cluster setup.
• Deploy, maintain, and troubleshoot any vSAN POD issues.
• Explore, evaluate, and test solutions for the banking environment.
• Maintain all current servers at customer sites, including firmware updates and break-fix support.
• Document and ensure all processes are in accordance with ITSM standards.

Requirement:

• Diploma/Bachelor’s degree in Computer Science, Information Technology, or a related field.
• 4 years of experience in server deployment and management.Proven experience in deploying and managing servers.
• Strong knowledge of PowerEdge server hardware, firmware, and BIOS configuration.
• Experience with ESXi installation and VMware cluster setup.
• Familiarity with vSAN POD deployment and troubleshooting.
• Expereince in PowerEdge server hardware and software, KVM, Network connectivity, ESXi & VMware, vSAN PODs.

Interested candidates, who wish to apply for the above position, please send in your resume to [email protected]

We regret that only shortlisted candidates will be contacted.

EA License No. 01C4394

EA Personnel Reg.No. R1104824 (Samsudeen Mohamed Basith)

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

“By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an emailto let us know. Please feel free to contact us if you have any queries.

Basic Qualification : At least ITE or Diploma in Electrical / Electronics

Minimum Experience : Fresh Grads /1 year working experience in installation in the field

of People Counting System, CCTV, Electronic Article Surveillance (EAS), Alarm System, Trouble Shooting, PC

literate.

Expected Skills : Knowledge of electrical & electronics

Good project supervision & documentations control

Independent

Driving Licence : Class 3 is required

Others : Able to communicate in English & Mandarin

5 days week – Monday to Friday 8.30am to 6.00pm

Lunch break : 45mins

Salary Range : $2K to $2.5K

Job Description

• Report to the Asst. Service Manager
• Responsible for project, implementation, installation, testing & commissioning of the system
• To carry out the maintenance works and services according to the maintenance contract.
• To manage and supervise the work progress of each project site by attending regular site meetings, coordinating with appointed sub-contractors of various services to see to ensure that projects are completed on schedule.
• To ensure proper and accurate records and documentations for the repair & servicing
• To standby and attend service calls

Location: Bukit Merah Central

As a Cloud DevOps Engineer, you will run and support the company’s software application infrastructure in the cloud, ensuring the optimized use of resources to scale.

What will you do

• Design, develop, and implement cloud infrastructure as code using Terraform.
• Manage and optimize cloud resources for cost-efficiency and performance.
• Secure infrastructure by implementing best practices and adhering to security compliance standards.
• Implement robust monitoring and alerting systems for infrastructure resources.
• Collaborate with developers and operations teams to integrate infrastructure changes seamlessly into the software development lifecycle.
• Champion DevOps best practices for cloud infrastructure management.
• Setup, monitor and support CI/CD pipeline on premise or in the cloud.
• Stay up to date on the latest AWS services and Terraform features.

What do we expect

• Proven experience as a DevOps Engineer with at least 3 years of experience (with a focus on AWS cloud infrastructure).
• Implementation proficiency in service control policy and account governance (Control Tower, OU management, etc.).
• Enable and configure AWS VPC flow logs, load balancer logging, direct connect, AWS VPN, TGX etc.
• Experience managing Unix/Linux environments.
• Extensive experience in scripting in languages such as Python/Ruby/Perl and shell scripting.
• In-depth knowledge and experience with AWS services (EC2, S3, VPC, IAM, etc.).
• Expert-level proficiency in Terraform, including writing reusable modules and leveraging best practices.
• Able to troubleshoot infrastructure issues in cloud, identify root cause and implementation improvement and fixes.
• Good knowledge of microservices architecture, container technologies (Docker, Kubernetes).
• Expertise in Git and GitOps philosophy.
• Good people skills, teamwork, collaboration with cross function and cross-geo teams.
• Self-motivated, willing to learn new technologies continuously.
• Maintain documentation for design, integration, testing, and deployment.

Good to have

• Relevant DevOps certifications (e.g. AWS).
• Some experience with other cloud providers like Azure and GCP.
• Experience with CI/CD pipelines and integrating infrastructure provisioning with development workflows.
• Knowledge on mobile and web applications development.
• Knowledge of big data and data analytics infrastructure in cloud.

Roles and Responsiblities

1. Site project management.

2. Overall project planning, scheduling, monitoring and updating to meet project completion targets.

3. Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.

4. Work closely with sub-contractors on project progress and ensure timely work arrangements

5. Liaise with consultant and carry out site inspection.

6. Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progress report.

7. Preparation of structural analysis, loading calculation and drawings.

8. Establish good relationship with all relevant parties.

9. Ensure site safety & compliance to authorities’ requirements.

10. To take on PE Assignee supervision role.

Requirement

1. Degree in Civil Engineering or relevant Engineering

2. Min. 3 years’ experiences.

3. RE registration with IES

4. Experience in Infra-structure project more than 200million.

Other informaiton :

Work location at Bugis

To Apply

Please submit updated CV with below details.

• Current & Expected Salary

• List of Projects Handled

• Notice Period

Role & Responsibilities:

• Develop, implement, and manage security controls to block and mitigate security threats across the IT infrastructure.
• Understanding of perimeter and endpoint security solutions and able to create policies based on requirements.
• Evaluate and perform analysis of the business risks and control environment to identify weaknesses and design the control to operate effectively.
• Regularly review and fine-tune existing policies to ensure they remain effective and up to date with the evolving latest security threats and best practices.
• Collaborate with other teams to ensure policies are aligned with organizational goals and compliance requirements.
• Troubleshooting policies if they are not working as intended.
• Monitor and Analyze Security Events: Continuously monitor security events and alerts, analyze potential threats, and take appropriate actions to prevent security incidents.
• Policy Development: Develop and maintain security policies, procedures, and guidelines to ensure compliance with industry standards and best practices.
• Incident Response: Collaborate with the incident response team to investigate and respond to security incidents, providing expertise on security controls and mitigation strategies.
• Reporting and Documentation: Maintain detailed documentation of security controls, configurations, and incidents. Prepare regular reports on the effectiveness of security controls.
• Training and Awareness: Provide training and guidance to other team members and stakeholders on security controls and best practices.

Skillset (Must have):

• Experience: Work experience in cybersecurity, with a focus on policy creation, monitoring, and incident response.
• Technical Skill: Skilled in managing NDR, EDR, WAF, email security, and DLP policies. Strong understanding of endpoint/network security, threat detection, and incident response. Proficient in SIEM data querying and analysis.
• Analytical Skill: Excellent analytical and problem-solving skills, with the ability to analyze complex security issues and develop effective solutions.
• Communication Skill: Strong written and verbal communication skills, with the ability to convey technical information to non-technical stakeholders.
• Team Player: Ability to work collaboratively with cross-functional teams and build strong working relationships.
• Accountability and Responsibility: Take ownership of assigned tasks and projects, ensuring they are completed on time and to the highest standards. Proactively identify areas for improvement and take the initiative to address them.
• Critical Thinking: Apply critical thinking skills to analyze complex security issues, evaluate potential solutions, and make well-informed decisions.
• Independently perform tasks and responsibilities with minimal dependency and guidance, while continuously learning and adapting to evolving technologies.

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Job Responsibilities

• Developing and designing network architecture and computer systems infrastructure.
• Overseeing the development, installation, and administration of computer systems.
• Monitoring computer systems and networks for viruses, malfunctions, and errors.
• Analyzing network data and infrastructure to determine inefficiencies and problems.
• Plan, design and manage AWS cloud implementations.
• Evaluate cyber security posture and recommend improvement.

Job Requirements

• Bachelor’s degree in Computer Science / Information Technology / or similar field.
• Solid working knowledge of networking (e.g. CCNA), Windows Domain, Office 365 administration, AWS cloud technologies and network security.
• At least 3 years of systems and network engineering related experience.
• Good communication skills in English.
• Good communication skills in Korean will be an added advantage

The ideal candidate will be responsible for all technical and engineering aspects of their assigned projects. They plan, schedule, predict, and manage all the technical tasks of their assigned project to assure accuracy, proper resources, and quality from start to finish.

Responsibilities

• Responsible for all technical and engineering aspects of their assigned projects
• Responsible to finish all tasks given by manager or top management on time
• Establish or design testing methods to monitor the overall quality of the project
• Collect and analyse project information to create status reports and recommend future actions
• Complete assigned project on time in full and coordinate with related department link to the project.

Qualifications

• Bachelor's degree or Diploma in Mechanical Engineering or equivalent experience
• Strong experience in AutoCAD, 3D Drawing (Autodesk Inventor, Solid Work, Pro E, similar)

Title: Manual Test Engineer

For quick response, please share your resume to [email protected] or WA to +65 92333815.

JD:

1. Candidate to have past system testing knowledge
2. Raise problem tickets to technology team for issues encountered in System testing
3. Create test cases based on user requirements
4. Escalate to managers / test leads in case of issues unresolved or blocking the test progress
5. Provide status updates on test progress and defects status on regular basis

Thanks, and Best Regards

Karanam Vijaya Kiran

(EA Registration no: R1443178)

HP: +65 92333815

Recruitment Manager

Helius Technologies Pte Ltd (EA Licence No: 11C3373)

Primary Objective(s) of Position
• Manage key phases of projects such as assembly, testing, installation, pre-commissioning, commissioning, troubleshooting, repairs and maintenance for the marine, power generation, petroleum, construction and industrial market segments.
• Responsible for product service support related work on both diesel and gas engines.
• Support the design and development of other aspects of projects, when required, including tendering, contract review, design, drawing, scheduling, purchasing, packing and shipment of marine and oil and gas engines, and respective associated propulsion and / or power generation systems, as per customers’ requirements.

Duties & Responsibilities
• Perform installation audit checks on engine set-ups at site and ensure equipment installations are according to manufacturer guidelines/recommendations, and generate report, as required.
• Perform pre-commissioning, commissioning and sea-trial activities (where applicable) at customer sites (in Singapore or overseas) to ensure proper equipment operation as per equipment manufacturers’ guidelines / customers’ requirements.
• Perform supervision of the assembly and packaging of engine and generator set packages at the workshop, inclusive of inspections and testing, as and when required.
• Configure engine settings and parameters to meet specific requirements.
• Utilize diagnostic tools, software and technical manuals.

Duties & Responsibilities (Cont’d)
• Investigate engine malfunctions, diagnose issues and identify root causes.
• Interpret error codes, schematics, and technical manuals to pinpoint root causes of engine malfunctions.
• Propose and implement effective solutions to resolve problems.
• Supervise the disassembly and reassembly of engines for repairs and overhauls, when required.
• Supervise the replacement of faulty components, bearings, seals and gaskets.
• Calibrate and fine-tune systems for optimal performance.
• Conduct functional tests of repaired or newly installed mechanical and electrical systems.
• Perform dyno / load testing on engines and generator set packages.
• Maintain accurate records of inspections, repairs, maintenance activities and testing results.
• Generate technical reports and service documentation for customers and internal use.
• Conduct on-site familiarisation training to operators, when required.
• Provide remote or on-site assistance for troubleshooting, technical support and guidance to customers.
• Attend / Conduct engineering and project meetings and on-site inspections both in Singapore and overseas (when required).
• Adhere to safety protocols and regulations while working on engines to prevent accidents and ensure a safe working environment.
• Other ad hoc tasks as assigned by management.

Person Specifications
• Possess a diploma/degree in Mechanical or Automotive Engineering.
• At least 2 to 3 years of working experience in related industry.
• Strong understanding of diesel and gas engine principles, components and systems.
• Proficiency in diagnosing and troubleshooting engine issues.
• Able to read and interpret technical manuals, schematics and engineering drawings.
• Attention to detail and commitment to safety.
• Good problem-solving skills and attention to details.
• Effective communication skills for interacting with customers and colleagues.
• Ability to work independently and as part of a team.
• Must be able to travel overseas as and when required.

1. Provide timely and effective technical support for application-related incidents and service requests.

2. Troubleshoot and resolve application issues, both independently and in collaboration with development teams.

3. Monitor application performance, identify bottlenecks, and implement performance enhancements.

4. Conduct root cause analysis for recurring issues and implement preventive measures.

5. Collaborate with internal stakeholders to gather requirements and provide recommendations for application improvements.

6. Maintain documentation related to application configurations, troubleshooting procedures, and known issues.

7. Participate in application deployment and release management activities.

8. Stay updated with industry trends and emerging technologies to drive continuous improvement in application support processes.

9. Support UAT and Interface Testing

Requirements:

1. Must have minimum 5 years experience.

2. Strong technical knowledge and experience in supporting enterprise-level applications.

3. Proficiency in troubleshooting application issues, performing log analysis, and using monitoring tools.

4. Experience with databases and SQL query language.

5. Familiarity with software development life cycle (SDLC) and ITIL principles.

Preferred Skillset

• Java

• Oracle Database

• MySQL Database

• Jira

• Excel

• Diploma / Bachelor's degree in a related filed or equivalent experience.
• Minimum 1 year of experience in installation of Electricla and communication infrastructures.
• Prior experience in Railway preferred.
• Oversee the installation of various systems, equipment or machinery.
• Ability to work in a fast-paced environment.
• Team player with good interpersonal and communication skills
• Able to work indepdently with minimum supervision.
• Candidate with 5+ years of experience will be considered for Managerial role.

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

· Act as the main technical adviser on a construction site for subcontractors, craftspeople, and operatives & junior Engineers.

· Responsible for checking/advise of plans, drawings, and quantities for accuracy of calculations of area are followed correctly.

· Responsible to ensure that all materials used, and work performed are in accordance with the specifications & budget.

· Responsible for work progress timescales. (In charge area)

· Supervising of project crews.

· Coordination with consultant traffic team for timely submission and obtaining approval of temporary and permanent traffic diversion plan.

· Coordination work with authorities, clients and QP.

· Coordination with LTA term contractors (traffic light and street lighting).

· Ensure safety, health & security of the in-charge area.

· Assist in preparation of Approve-In-Principle (AIP), Preliminary, pre-final and final submission drawings with consultant for LTA, NPARKS, PUB and BCA submissions.

· Attending and preparing minutes for meeting with clients, consultant and technical agencies such as NPARKS, PUB, HDB, URA and etc

· Liaise and coordinate with interfacing contractors on traffic diversion matters.

· Assist in planning and execution of works

· Review method statement for various construction works and traffic diversion and traffic control plan for submission to LTA.

· Take part in briefing with sub-contractors on the technical

· Deal with arborist on site works to meet NPARKS requirement

Qualifications and Education Requirements

· Minimum 10 years of working experience in road alignment design and traffic engineering after tertiary education. Shall be well versed and have experience in LTA’s design standards.

We are seeking an experienced Senior Software Engineer with expertise in C++ or Java to join our client team. The ideal candidate will have at least 4 years of hands-on experience in software development and a passion for building high-performance, reliable, and scalable systems.

Responsibilities:

• Design, develop, and optimize software solutions using C++ or Java, ensuring high performance and reliability.
• Collaborate with cross-functional teams to define, design, and ship new features or improve existing systems.
• Troubleshoot and resolve complex technical issues, ensuring minimal downtime and optimal system performance.
• Lead code reviews to maintain coding standards and mentor junior developers.
• Contribute to system architecture discussions and help design scalable and efficient software systems.
• Develop and implement unit tests, integration tests, and documentation to ensure code quality.
• Stay updated with the latest trends and advancements in C++/Java and related technologies.
• 
  

Requirements:

• A graduate in Computer Science, Software Engineering, or a related field.
• At least 4 years of professional experience in software development with a strong focus on C++ or Java.
• Solid understanding of object-oriented programming (OOP) principles and design patterns.
• Experience with multithreading, memory management, and performance optimization in C++ or Java.
• Proficiency in working with databases (e.g., MySQL, PostgreSQL, or NoSQL databases).
• Familiarity with version control systems (e.g., Git) and CI/CD pipelines.
• Excellent problem-solving skills and the ability to work effectively in a collaborative environment.
• Knowledge of cloud platforms (e.g., AWS, Azure, GCP) and containerization (e.g., Docker, Kubernetes).
• Experience with frameworks/libraries such as Spring (for Java) or Boost (for C++).
• Familiarity with network programming, real-time systems, or distributed computing.
• Exposure to Agile development practices and tools like JIRA.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Roles & Responsibilities

• Assist Project Manager to ensure project is progressing as planned and is completed on time within budget, contractual and Safety standards.
• Assist Project Manager to ensure all site works are done accordingly to specifications and to relevant authorities’ requirement.
• Prepare & submit drawings, materials and necessary documents to consultant for approval.
• Check working drawing, identify discrepancies for resolution.
• Maintain inspection records of works, materials and all completed works.
• Keeping track on variation and claims of contract and cost impact and feedback information to the Project Manager.
• Implement cost control measures to meet project budget.
• Site co-ordination with all concerned parties and to resolve site issues.
• Handle any other ad-hoc duties and tasks assigned.

Requirements

• Candidate must possess at least a PEB/BCA recognized degree in Civil Engineering
• Minimum 3 years on site experience in Civil Engineering and Infrastructure works in Singapore
• Computer literate with knowledge of MS Project, Primavera, BIM and AutoCAD
• Ability to work independently and communicate at all levels.
• Advantageous to possess Class 3 Driving License

**Please submit your complete CVs exclusively in written form to [email protected]**

Responsibilities

• Collaborate with the production and planning teams to prioritize tooling schedules based on the current tool status and production demands.
• Provide technical support to the tool designing and sales teams, ensuring that customer requirements are met through effective tooling solutions.
• Take a leadership role in problem-solving and troubleshooting within the tooling team, identifying root causes and implementing corrective actions.
• Support continuous process improvements for tooling and work processes to enhance productivity and efficiency across the department.
• Work closely with the toolroom to identify machining needs for tooling modifications and improvements, ensuring tool readiness for production requirements.
• Oversee and guide the toolmakers, training them to enhance their skills and ensuring high-quality standards are maintained in all tooling activities.

Requirements:

• Diploma in Precision Engineering or equivalent.
• Technical qualification in Tool & Die Making or a related field.
• Ability to lead and manage a team, fostering collaboration and continuous improvement.
• Strong problem-solving skills with experience in root cause analysis and troubleshooting.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: L739Y7RX

ALG is currently hiring Licensed Aircraft Engineers (B2) for our client based in Singapore. This role is an exciting long-term contract position with us.

Our client is renowned in the aviation industry for aerospace manufacturing, maintenance, repair, and overhaul of aircraft engines.

Job Responsibilities:

• Perform and certify aircraft maintenance tasks including inspection, repair, modification, and functional tests

Job Requirements:

• A CAAS license or an Aircraft Maintenance License, that is transferable to a Singaporean CAAS license; These include (but not limited to) – EASA, CASA, DCAM, etc.;
• Possess at least 2 type ratings, with a minimum of one of the following type ratings: A320, A350, A380, B747, B777, and/or B787
• At least five years of experience as an LAE; and
• Excellent interpersonal and communication skills (English proficiency in reading/writing)
• Good customer relationship skills

If you are interested in this role, please APPLY NOW! Please note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R22105273

Job Description:

• Ensure the quality of all construction work performed on site are in accordance with the company's QAQC requirement.
• Visit project sites, arrange and conduct QAQC inspections on mainly Structural Works and Architectural Works.
• Assist project teams on the preparation of project specific CONQUAS/Quality Management assessment by BCA with specific contract requirements.
• Ensure workmanship, procedures and method statements are in accordance to specified standards.
• Conduct regular inspections to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA’s good industry practises.
• Ensure that all project quality records and quality audit plans are maintained.
• Any other duties as assigned.

Job Requirement:

• Candidate must possess Bachelor Degree or Diploma in relevant discipline.
• Minimum 3 years of experience in construction/ civil engineering industry.
• Able to read and understand CAD, Revit/Navisworks software services in 3D model is essential.
• Have experiences in working in large scale projects.

Responsibilities

• Assist, plan and execute Mechanical / Electrical / Fire / Plumbing & Sanitary (MEPL) project in compliance with safety, quality, and schedule
• Perform overall quality control of the work (budget, schedule, plans, team performance, supervision, and inspection)
• Manage project budget and expenses and provide regular project budget statement and progress update.
• Prepare, schedule, coordinate and monitor the assigned projects
• Monitor project compliance to applicable codes, practices, QA/QC policies, performance standard and specifications
• Assist to propose value engineering methods with the clients to interpret their requirements and represent them in the field
• Ensure site organization, workforce management and arrangement
• Provide technical submission of proposal / drawings / MOS / RA etc
• Attend site meetings and necessary site walk
• Cooperate and communicate effectively with internal and external stake holder.
• Review engineering deliverable and initiate appropriate corrective actions
• Any other duties as assigned and comply to ISO / OSHA standards

Requirements

• 1-3 Year(s) of working experience in managing Additional and Alteration services in Commercial / Industrial / Plants sectors for Mechanical, electrical, Plumbing and Sanitary system, Fire system (MEPL)
• Candidate must possess at least Bachelor's Degree/ Diploma in Engineering or equivalent.
• Proficient in MS Excels/words/PowerPoint/Project
• Preferred skill sets: good leadership skill, self-Driven, resourceful, problem-solving nature, strong business acumen, project management and good conversational/writing skills in English

Responsibilities

· Understand customer demands, challenges, and objectives through assessments, information gathering and Customers, technology/industrial engagements

· Collaboration with sales & business development, product & engineering stakeholders including analyse and selection of appropriate hardware, software, and services to create the winning solution offering to customer and markets

· Developing detailed proposals, presentations, and technical documentation that outline the proposed solutions, including features, benefits, and pricing. Presenting these proposals to customers in a clear and compelling manner

· Preparation and conduct of product and solution exhibitions, demonstrations and proof-of-concept activities to showcase the capabilities and address any technical questions or concerns from customers

· Providing technical expertise and support to business development & sales team throughout the sales cycle, including participating in customer meetings, responding to technical queries, and contributing to the development of sales strategies

· Building and maintaining relationships with technology vendors and partners to stay informed about the latest products, technologies, and industry trends. This includes evaluating new solutions and incorporating them into proposed designs

· Keeping up-to-date with advancements in communication technologies, industry standards, and best practices. Pursuing opportunities to enhance technical skills and knowledge

Requirements

· Degree in Electrical/Electronics/Communications Engineering

• Minimum 5 years’ experience in Communications/Telecommunications/Infosystems Solutions Engineering and Implementations, supporting as a Pre-Sales capacity

· Strong understanding of communications technology

· Able to follow up closely with customers in order to answer to their needs

· Working location is in Jurong East

· Singaporeans Only

Please submit resumes to [email protected]

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

RESPONSIBILITIES

• Management of fast-paced and/or complex projects undertaken by ITS Science & Medical in Singapore or regional areas.
• Responsible for project management of infrastructure services supplied/offered by the Company that include, but not limited to hospital infrastructure, animal facilities, laboratory furniture, industrial, schools and other systems.
• Manage ACMV, HVAC system laboratory projects to completion in both Singapore and/or international standard, adhering to quality assurance policies and meeting performance standards
• Liaise with all stakeholders including facility management, architects, M&E consultants on engineering design and user specification, ensuring compliance
• Part-take in project tendering meetings and provide technical advice to tender team
• Prepare and manage project schedule and monitor project activities by project team to ensure compliance to activity execution timeline
• Provide technical support to Support sales team from time to time.
• Ensure Workplace Safety and Health is implemented at site.

REQUIREMENTS

• Diploma/Bachelor’s Degree in Mechanical Engineering or related Engineering disciplines.
• Experience in ACMV is preferred.
• Preferably with 3-5 years of relevant work experience handling construction projects (designing & management)
• Valid Class 3 driving license and personal vehicle will be an added advantage.
• Team player with a great can-do attitude.
• Outgoing personality.

BENEFITS

• Attractive remuneration package
• Career development opportunities