• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

VFlowTech is excited to offer a PhD scholarship under the Industrial Postgraduate Programme, a fully funded initiative by the Singapore Economic Development Board and Enterprise Singapore. This program provides aspiring researchers with the opportunity to address critical challenges in Vanadium Redox Flow Battery technology, focusing on mitigating shunt currents, reducing losses, and enhancing system reliability and efficiency. Candidates will be full-time employees of VFlowTech while pursuing their PhD at Newcastle University (UK).

The research project aims to develop a hybrid energy storage system (HESS) by integrating flow battery and lithium-ion battery technologies into a single microgrid solution. The candidate will contribute to hardware development and advanced control algorithm creation, optimizing performance, efficiency, and reliability. This prestigious program offers a unique opportunity to drive innovation in energy storage systems.

Key Responsibilities:

1) Design and Simulation of Hybrid Energy Storage System (HESS):

• Determine suitable battery chemistries and sizes for the HESS.
  • Conduct simulation tests and analyze initial results to ensure optimal design and functionality.

2) Development and testing of HESS Hardware:

• Implement and integrate the simulated HESS design into the physical hardware.
  • Conduct intensive testing and validation of the HESS prototype to ensure performance standards are met.

3) Development of Energy MAnagement System (EMS) Algorithm:

• Develop a hybrid EMS to control and optimize the use of both battery technologies.
  • Implement smart charge and discharge control logic to enhance system efficiency, reliability, safety, cost-effectiveness, lifespan, and overall power and energy density.
  • Utilize state-of-the-art AI techniques to develop advanced EMS algorithms for efficient energy management.

Qualifications:

- Academic Background:

• An Undergraduate or master’s degree in electrical engineering, Power Electronics, Energy Systems, or closely related field.
  • Strong academic record and research experience in relevant areas.

- Technical Skills:

• Proficiency in power electronics and energy storage system design.
  • Experience with battery management systems (BMS) and energy management systems (EMS).
  • Familiarity with simulation software and tools used in power and energy systems.

- Research and Development:

• Demonstrated experience in designing, simulating, and testing energy storage systems.
• Ability to conduct independent research and develop innovative solutions to complex problems.
  • Strong analytical and problem-solving skills.

- Soft Skills:

• Excellent written and verbal communication skills.
  • Ability to work collaboratively in a multidisciplinary team.
  • Strong organizational and project management skills.

Benefits:

• Opportunity to work on a pioneering project with significant real-world applications.
• Access to state-of-the-art research facilities and resources.
• Collaboration with leading experts in the field of energy storage and power electronics.
• Competitive salary and funding for research-related expenses.
• Work and earn a PhD degree simultaneously with no tuition fee.

Application Process:

Interested candidates should submit the following documents:

• A detailed CV highlighting relevant experience and skills.
• A cover letter explaining your motivation for applying and your research interests.
• Academic transcripts and certificates.
• Contact information for at least two academic or professional references.

Deadline:

Applications will be reviewed on a rolling basis until the position is filled. Early applications are encourage.

Contact:

For further information or to submit your application, please contact: h[email protected] and [email protected]

Join us in advancing the future of energy storage technology and making a significant impact on the efficiency and reliability of micro-grid systems!

Field Service Engineer

• 5 Days (Mon-Fri)
• 830am-5pm
• $2,800-$3,800 + $120 Transport Allowance
• Gambas Crescent

Responsibilities:

• Attend to client side to solve their machineries issue

Requirements:

• Knowledge of Electrical & Mechanical
• Few years of hands-on experience on repair & servicing of machineries
• Able to travel within short notice
• ITE or diploma Cert

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Engineer

Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm, Saturday may need work half day if work required (can claim OT)
Office at City Hall, may need work at site
Salary: $5000 to $7500

Requirements
Minimum of 5 years of relevant site / building construction experience.

Roles & Responsibilities
To coordinate with consultants / subcontractors on the shop drawings / samples / method statements and keep all involved parties updated of the latest changes.
To attend to project / technical meeting and resolve site issues with owner / consultants for the site progress to proceed smoothly.
To verify the work done on site are in accordance with the approved drawings / specifications / authority’s requirement and ensured that the subcontractor carry out rectification for non-compliance.
To resolve site issues with consultants / subcontractor / supplier ASAP to minimise delay to the construction progress.
To ensure that the related documentations are updated and ready for ISO audit.
To cooperate with the safety department and carry out the assigned duties within the safety framework.
Assist site management team in project Planning & coordination.
Plan and schedule work sequences for construction operation.
Arrange and prepare documents for authorities’ submission for Conquers, RI, TOP etc.
To study tender / construction drawings, specifications, and contracts to understand project requirements.
Understanding of critical project criteria related to schedule & productivity.
Able to provide guidance to new staff / junior staff.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Piping Engineer

[Oil & Gas | EPC Industry]

• Basic: $4,600 - $5,400 (Depends on EXP)
• Working Hours: 5 Days
• Location: South (Near MRT)

Interested applicants can sent your CV to email [email protected] or via whatsapp to +65 8064 9869 (TongHai)

https://wa.me/6580649869

About Our Client:
Our client is a distinguished leader in the Oil & Gas and Petrochemical sectors, renowned for its engineering prowess and dedication to delivering landmark projects. As a reputable EPC contractor, they push the boundaries of what’s possible in infrastructure solutions, emphasizing innovation, safety, and sustainability to bring complex visions to life. This organization is at the forefront of engineering excellence, setting industry benchmarks throughout the region.

Why Join This Team?
Joining our client means becoming part of an inspiring and forward-thinking team that values your expertise and fosters your growth. This role offers you the opportunity to shape major engineering projects, making impactful contributions that resonate across industries. With an environment built around cutting-edge technology, collaborative problem-solving, and continuous professional development, you’ll thrive in a workplace that rewards ambition, innovation, and dedication.

Roles and Responsibilities

As a Piping Engineer, you will play a key role in the design, analysis, and coordination of piping systems and structures for complex engineering projects. Your responsibilities include:

• Preparing essential project documents such as line indexes, tie-in lists, piping layouts, loading calculations, MTO sketches, BM/BQ, and detailed 2D/3D CAD models.
• Conducting stress and vibration analysis, interpreting data for moments, stresses, reaction forces, and displacements, and ensuring solutions meet project schedules and budgets.
• Developing piping system designs that adhere to project standards, specifications, and industry best practices, utilizing your expertise in advanced CAD tools.
• Collaborating with senior engineers to study project requirements, perform field surveys, and verify tie-in locations.
• Supporting the preparation of steam trace piping and pipe support drawings in 2D CAD format and contributing to model reviews, interference detection, and technical evaluations.
• Assisting in the resolution of design challenges to meet code requirements and vendor specifications.

Requirement

• Bachelor’s Degree in Mechanical or Chemical Engineering with at least 5 years of relevant experience.
• Proficiency in advanced CAD tools, including AutoCAD, CadPipe, Microstation, PDS Intergraph, and SP3D.
• Strong mathematical aptitude for piping calculations, including trigonometric functions, logarithms, and other engineering formulas.
• Excellent analytical, problem-solving, and communication skills, with the ability to interpret technical data and prepare effective business communications.
• A proactive attitude and adaptability to technology upgrades and changing project needs.

Interested applicants, please click "APPLY NOW" or send your resume to [email protected]

We regret to inform you that only shortlisted candidates will be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Kho Tong Hai | EA Reg No: R24122411

• MNC, 5 days, North
• $4000 - $4800, performance bonus
• Career advancement

Job scope:

• Operate and maintain advanced probe card analyzers and QA equipment, ensuring compliance with operational standards and functionality benchmarks.
• Prepare, debug, and validate test files for probe card certification, ensuring alignment with precise technical specifications and quality criteria.
• Conduct in-depth investigations and resolve probe card related issues,employing a methodical approach to diagnose root cause and implement corrective measures.
• Engage proactively with relevant departments to maintain QA readiness for all certification processes, ensuring seamless coordination on quality-related challenges.
• Serve as a liaison with headquarters and customers on new certification processes, offering technicial updates and managing expectations effectively.
• Contribute to the continuous improvement of QA processes, leveraging industry insights to enhance operational efficiency and quality outcomes.
• Take on supplementary duties as required, supporting the team in achieving project goals.

Requirements:

• Minimum a Diploma/Degree in Electronics, Mechanical Engineering or equivalent.
• Knowledge in wafer testing or probe card is an advantage
• Good communication and written skills
• Able to start within short notice will be an advantage

Interested applicants, please send your resume to [email protected]

Field Service Engineer | Up to $3.8k | 5 Days | Sembawang

5 Days (Mon-Fri)
830am-5pm
$2,800-$3,800 + $120 Transport Allowance
Gambas Crescent, Nordcom 1

Responsibilities:

• Attend to client side to solve their machineries issue

Requirements:

• Knowledge of Electrical & Mechanical
• Few years of hands-on experience on repair & servicing of machineries
• Able to travel within short notice
• ITE or diploma Cert

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Responsibilities:

· Troubleshoot and resolve technical issues on semiconductor equipment and systems including computer systems, complex software, or networked and/or wireless systems.

· Perform on-site installation, continual improvement programmes, parts' overhaul, preventive maintenance, modifications, and repair works on equipment.

· Serves as company liaison with customer on administrative and technical matters for assigned projects.

· Coordinate logistics arrangements and with customer on equipment related matters.

· Responds to customers’ complaints, provides time to solutions to resolve customers’ issues.

· Monitors the performance of the product, provide regular update report and feedback on customer’s service requests.

· Reports common complaints of customers to management to address the situation for future reference.

Requirements:

· Degree/Diploma in Electrical/ Electronic Engineering or its equivalent

· At least 2 years of relevant experience with semiconductor equipment knowledge

· Strong communication and good interpersonal skills

· A meticulous, organized and resourceful team player

· A highly motivated individual who works independently with little supervision

· Work in cleanroom environment

· Require to work or be on standby during after office hours/weekend/public holiday

To find out more about this opportunity, please contact Lionel Liew at [email protected].

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793| EA Personnel: Lionel Liew | Registration No: R1330693

Job Responsibilities:

• Integrate best practices from development, platform and application testing, and process support throughout the software development lifecycle.
• Oversee tool development, solution creation, integrated tool and platform testing, and enhance speed and productivity.
• Build, configure, and provide support for new development infrastructure and tools.
• Understand stakeholder requirements and effectively communicate them to the development team.
• Explore and implement new methods to automate and improve development and release processes.
• Review and test code written by others, analyzing the results for quality.
• Ensure systems are protected against cyberattacks and security threats.
• Identify technical issues and bugs, and develop software updates to resolve them.
• Collaborate with engineers to ensure software is developed according to established processes and functions as expected.
• Plan and manage projects, contributing to project management activities.
• Actively participate in HSE (Health, Safety, and Environment) initiatives, including hazard/incident identification, risk assessments, and control measures.
• Ensure work activities and behaviors align with HSE policies, objectives, and procedures, and comply with relevant legal requirements.
• Perform additional duties as required to support the role.

Requirements:

• Minimum diploma in Computer Science, Information Technology, or a related discipline.
• Experience in developing application systems, including database applications, Excel macros, web applications, Android mobile apps, IoT projects, Microsoft Office automation, and Microsoft Power BI development.
• Knowledge and experience in implementing Industry 4.0 solutions.
• Quick to learn with a proactive attitude toward acquiring new skills.
• Strong communication skills.
• Analytical and creative problem-solving abilities.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Nyon Hock Sen
EA Personnel Reg No: R24124070

Our client specializes in power solutions, ensuring the delivery and maintenance of electrical supply.

• Perform sales and business development for assigned region.
• Create and implement sales and marketing strategies to achieve sales target.
• Liaise with customers and design engineers to specify the products.
• Continuous search business opportunities and expand market share.

Requirements:

• Diploma in Electrical/Electronics Engineering or equivalent.
• At least 4 years of sales experience with good connections in Petrochemical/EPC/Power Plants industry.
• Strong interpersonal, communication and presentation skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to[email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities

• Diagnose and solve technical problems on semiconductor machinery and systems, such as computer setups, advanced software, or networked/wireless systems.
• Carry out on-site installations, continuous improvement initiatives, parts overhauls, preventative maintenance, equipment modifications, and repair work.
• Act as the main point of contact between the company and the customer for both administrative and technical matters related to assigned projects.
• Organize logistics and coordinate with customers on equipment-related issues.
• Address customer complaints, offering timely solutions to resolve their issues.
• Track product performance, providing regular updates and feedback on customer service requests.
• Report recurring customer concerns to management to help prevent future issues.

Requirements:

• Minimum of 2 years of related experience in Semiconductor Industry
• Possess at least a Diploma/Degree in Electrical or Electronic Engineering
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXV54V53

JOB HIGHLIGHTS

· Cutting Edge Internet-of-Things and AI Technologies

· Open Source and Maker Culture

· Friendly Working Environment

JOB DESCRIPTION

· Realtek is one of the leading fabless semiconductor design companies in the world, with this position, you will get to play a role in value-add to the latest Realtek wireless communication IC product line.

· You will develop software and firmware for the state-of-the-art Internet-of-Things microcontrollers, writing tools, automation, and build systems.

· You will also work closely with the hardware, driver, test, and marketing team to be exposed to the entire product designing cycle.

· You will have the chance to prototype your ideas and make them public through social media, workshops, and events.

· You will be able to follow the latest tech trend and learn new skills when working with cutting-edge technologies.

ROLES & RESPONSIBILITIES

· Be a part of a team that maintains, implements, and validates embedded software for Realtek's latest IoT SoCs

· Design application-level middleware to simplify the customer development process

· Port new features, capabilities, and platforms to Realtek IoT SoCs

· Prototype innovative IoT applications using various network protocols, tools, and open source software

· Debug and fix peripheral, wireless connectivity(Bluetooth, Wi-Fi, etc.), and network-level issues

· Collaborate with third parties for hardware and software projects (ARM, SeeedStudio, Sparkfun, Adafruit, AI-Thinker...)

· Online & offline event organization with groups, institutes, and local universities

· Content creation and social media marketing strategy based on Realtek IoT solutions

· Community management and customer support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electrical Engineering, or other related majors

· Fresh graduates are welcome to apply

· Experience with C/C++ and a scripting language(Python/Bash/etc.) is a must

· Experience with embedded system drivers, peripherals, computer networks, wireless connectivities, and open source development platforms (Arduino, PlatformIO, etc.)

· Experience with TinyML and/or AIoT-related development is a bonus

· Experience with video editing and content creation

· Willingness to learn new technologies and ability to follow the latest software and electronics trend

· Good Communication and Teamwork Skills

Responsibilities:

• Responsible & ensure smooth implementation and monitoring of work at the site
• Gather, check site date, recording and monitoring of site work progress/ productivity
• Prepared technical write-up for tender submission including drawings, methodology and program
• Liaise with design consultant to ensure completion of deliverables
• Prepared document for tender submission
• Liaise with design consultant to ensure completion of deliverables
• Procurement and estimating of trackwork materials
• Assisted in preparing presentation slides for internal management review and tender interview with client.

Requirements:

• Min Diploma / Degree in Civil Engineering or its’ equivalent
• Experience in underground civil works (tunnelling) ,Diaphragm Wall, Bore Piling is a plus
• Experience in LTA/MRT Project is an advantage
• Able to lead and work independently

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Responsibilities:

• Pre-sales support including a full range of company products, network technical solutions, highlights proposals, etc
• Develop business opportunities with clients
• Promote solutions and deliver formal technical proposals/presentations to clients
• Responsible for product solution designing and ensuring the solution is competitive
• Identify clients' requirements and coordinate with the sales team to ensure that the clients' requirements are able to meet
• To understand the client's business and technical requirements
• To handle clients' inquiries and technical-related issues
• Conduct product training for clients

Job Requirements:

• Experienced in networking products
• At least 1 year of work experience in networking
• Capability to communicate with and influence customers including technical alignment, communication, clarification, and negotiation with customers
• Ability to speak in Chinese as the incumbent requires to liaise with the China HQ counterparts/personnel for work or project related matters
• Experienced in handling and troubleshooting technical issues.
• Possess CCNA/CCNP and other networking certificates would be an added advantage

Working with the development team, you will be responsible for the design development, documentation, testing and delivery of the software solution for an Automatic Fare Collection (AFC) system.

The activities required to be performed shall include the following:

• Requirements gathering;
• Design, development, and maintenance of the software;
• Preparation and submission of deliverables throughout the software development lifecycles such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the standard adopted by the Authority;
• Assist the Authority with day-to-day application support issues; and
• Liaise with users on the requirement, design and testing issues.

Qualifications & Requirements:

• Recognised degree in Computer Science, IT or engineering with at least 5 years’ relevant experience in software development;
• Gone through at least one full software development lifecycle (SDLC) with experience in producing SDLC documentations;
• Extensive experience in analysing requirements, designing, development and delivering complex enterprise applications in Java/JEE, web programming on UNIX / LINUX and Windows environment;
• Proficiency with database programming such as SQL and DAO, and relevant experience with MySQL, PostgreSQL
• Experience in Spring Framework and Spring Boot;
• Experience in Software Modernization, Containerization, Microservices;
• Experience in Agile development methodology and continuous integration;
• Experience in writing Requirements Specification, Use Cases, Design Documentation, object-oriented software design and UML modelling;
• Proficiency in AWS ECS and Docker containerization, with a solid understanding of DevOps principles and best practices
• Strong analytical and problem-solving skills; and
• Good written and verbal communication skills in English.
• Self-motivated and a good team player
• Added advantage if candidate is familiar with one or more of the following technologies:i.Experience in Message Queues and/or Solace;
  ii.Experience in Cloud Computing, Kubernetes & Dockers, AWS Services like Amazon ECS Fargate, AWS RDS & Lambda;
  iii.Experience in Automatic Fare Collection (AFC) system;
  iv.Experience in Microsoft Active Directory
  v.Experience in HTML / CSS / JavaScript / JSON
  vi.Experience in Secure Communications (SFTP, HTTPS, etc.)
  vii. Experience in Angular or equivalent
  viii.Experience in Java Unit Tests frameworks
  

As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements.

Roles and Responsibilities:
Work on Fuse and Security IP during the whole project phase
From Pre-Silicon to High Volume Manufacturing phase
Support High Volume Manufacturing requirements.
Triage and debug failures on Silicon.
Develop test contents and testing strategies to assist on Fuse bring up on silicon.
Work with other Product Development Test Engineers to solve manufacturing challenges involving Fuse/Security IP
Work with cross functional team to suggest, enhance and/or improve future Fuse/Security IP bring ups.

Minimum Requirements:
BA/BS degree in CS/EE with 5+ years’ experience.
3+ Experience in Silicon Validation and bring up.
Knowledgeable on ATE Platform like Advantest 93K, Teradyne UltraFlex
Experience with software programming/test method development in Java, C++

Preferred Requirements:
Strong understanding of Java programming.
Strong understanding of Fuse Sense and Programming, and Cryptography concepts in Silicon.
Experience in Digital Testing and design verification.
Experience in Test development for validation of Fuse on Silicon.
Experience in development of test vectors for tester bring up.

On behalf of our Client, Manage the Install, Test, Commission and Leave In Service LV Equipment and associated works to meet Schedule and Budget. Comprising all electrical system/equipment works for:

• 400, 480 and 208V Switch Boards.
• 33/0.4, 33/0.215, 33/0.48kV Transformers.
• Power and control cables
• LV Variable frequency drives and DOL starters
• LV protection system
• Integrated monitoring system and SCADA
• General Electrical installations Lighting and small power
• Earthing and lightning protection system.
• PV , UPS and battery chargers
• Process busways and power distribution systems.

Other works associated with system equipment mentioned above:

• Ensure Project Equipment ‘Green Tag’ requirements are met prior to Sign Off and to perform detailed Reviews, Comment and Project Sign off for the Completed Project Quality Documentation (QCD, MCCD, CCD) on behalf of Client and in readiness for Client’ System Owner’ Blue Tag approvals.
• Provide technical inputs at Design Reviews, Drawing Submission Approvals.
• Pre-qualification compliance to Client Standards and to Electrical Code for New ‘First of a Kind’ Facilities Electrical Equipment.
• SOW and DM for Client direct buy equipment.
• Review, revise, modify and approve to meet Client requirements for and attend Factory Acceptance and Site Acceptance Testing.
• Generate Electrical Switching Procedures / Presentations.
• Review, revise, modify and approve Sequence of Operations procedures.
• Attendance & Technical participation at Base Build Project Design Reviews, Management Meetings, Weekly Project Discipline Work Group Meetings, Client and Commercial Meetings.
• Through the Project change Process, advise and propose Electrical Upgrades required to meet Model of Record needs as well as supporting multi-discipline RFP approved upgrade Projects for Facilities Mechanical, Gas, UPW, WWT, Gas Yard and Chemical Plant.

Job Description:

• Must be a Diploma/Bachelor's Degree holder.

• Hands-on implementation experience in building full-stack Restful web Applications.

• Experience in the following domain area/Technology/Programming languages

• Communication/Data Protocols: Modbus, OPC UA/AD, IEC 101/104, TCP/IP, SFTP, MQTT, AMQP

• Programming languages: JavaScript, Python, C/C++, SQL

• Experience in Linux, Docker, PostgreSQL, And Firewall management

• Experience in Code Management and Deployment

• Certified in Microsoft Technologies will be an added advantage

• Knowledge in Azure Devops, Azure IOT and Azure sphere will be an added advantage.

Roles and Responsibilities:

• The candidate will be responsible for designing and implementing data acquisition solutions and systems that meet the requirements of our clients.

• The successful candidate will be expected to have strong problem-solving skills and be able to troubleshoot and debug complex issues.

• The candidate will also be responsible for developing and maintaining documentation for solutions, including design specifications and test plans.

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Working with the development team, you will be responsible for the design development, documentation, testing and delivery of the software solution for an Automatic Fare Collection (AFC) system.

The activities required to be performed shall include the following:

• Requirements gathering;
• Design, development, and maintenance of the software;
• Preparation and submission of deliverables throughout the software development lifecycles such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the standard adopted by the Authority;
• Assist the Authority with day-to-day application support issues; and
• Liaise with users on the requirement, design and testing issues.

Qualifications & Requirements:

• Recognised degree in Computer Science, IT or engineering with at least 5 years’ relevant experience in software development;
• Gone through at least one full software development lifecycle (SDLC) with experience in producing SDLC documentations;
• Extensive experience in analysing requirements, designing, development and delivering complex enterprise applications in Java/JEE, web programming on UNIX / LINUX and Windows environment;
• Proficiency with database programming such as SQL and DAO, and relevant experience with MySQL, PostgreSQL
• Experience in Spring Framework and Spring Boot;
• Experience in Software Modernization, Containerization, Microservices;
• Experience in Agile development methodology and continuous integration;
• Experience in writing Requirements Specification, Use Cases, Design Documentation, object-oriented software design and UML modelling;
• Proficiency in AWS ECS and Docker containerization, with a solid understanding of DevOps principles and best practices
• Strong analytical and problem-solving skills; and
• Good written and verbal communication skills in English.
• Self-motivated and a good team player
• Added advantage if candidate is familiar with one or more of the following technologies:i.Experience in Message Queues and/or Solace;
  ii.Experience in Cloud Computing, Kubernetes & Dockers, AWS Services like Amazon ECS Fargate, AWS RDS & Lambda;
  iii.Experience in Automatic Fare Collection (AFC) system;
  iv.Experience in Microsoft Active Directory
  v.Experience in HTML / CSS / JavaScript / JSON
  vi.Experience in Secure Communications (SFTP, HTTPS, etc.)
  vii. Experience in Angular or equivalent
  viii.Experience in Java Unit Tests frameworks
  

Note: This role will require travel to China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Responsibilities

• Participate in system- related vulnerabilities testing and drill

• Participate in IT audit and Disaster Recovery Plan

• Monitor network and system utilization

• Assist in any other duties as assigned from time to time, where applicable

• Manage or participate in new setup or upgrade of system infrastructure projects

• Responsible for supporting operational systems satisfying contractual service level agreement

• Perform and manage routine preventive maintenance and operational activities promptly and effectively

• Provide project documentation and reports

• Engage with vendor’s support to diagnose and rectify technical issues

• Manage external vendors and contractors for repairs and purchases

Requirements

• Degree in Computer Science/Computer or Information Technology or equivalent

• Good knowledge and hands-on experience in computer/server hardware systems troubleshooting and peripherals replacement

• Experience in Windows server OS, Unix/Linux OS & VM environment

• Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment

• Pro-active, dynamic and with good analytical/conceptual thinking

• Able to work independently as well as in a team and good interpersonal skills

Licence no: 12C6060

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm

Digital Trust Centre (DTC) is looking for a candidate to join them as a Research Engineer II.

Key Responsibilities:

• Conduct cutting-edge research in large language models, translating theoretical algorithms, frameworks, and methodologies into practical, working prototypes that demonstrate potential product applications.
• Collaborate closely with researchers and engineers to design and implement system architectures and software solutions that transition research findings into scalable, deployable products.
• Develop and build tools and frameworks to facilitate the transfer of LLM capabilities to industry partners, showcasing the practical value and impact of the research outcomes.
• Create and maintain comprehensive technical documentation, including white papers, presentations, and tutorials, to disseminate knowledge to a broader audience and enhance overall expertise in these emerging areas.
• Engage with international research communities and partners to stay abreast of the latest advancements in machine unlearning, contributing to discussions, collaborations, and initiatives that elevate Singapore’s position in the global AI and privacy research landscape.

Job Requirements:

• Minimum Masters’s degree in computer science/ engineering or related fields.
• Proficiency in Python is a must. Experience with other programming languages such as Java, C/C++, or Go, and frameworks like PyTorch or TensorFlow, is highly advantageous.
• Experience in developing and deploying machine learning models, particularly in natural language processing (NLP) and large language models (LLMs), including tasks such as data preprocessing, feature extraction, model training, and evaluation.
• Strong knowledge of machine learning and deep learning techniques, including knowledge graphs, machine unlearning, and AI testing.
• Proficiency in working with common Linux distributions (e.g., Ubuntu, CentOS) and familiarity with shell scripting and command-line tools.
• Experience with cloud platforms (AWS, GCP, Azure) and containerization technologies (Docker, Kubernetes) is a must.
• Experience with version control systems (e.g., Git) and collaborative development tools.
• Experience in developing ML systems from end to end, including data exploration, feature engineering, model training/evaluation will be advantageous.
• Ability to communicate complex technical concepts effectively to both technical and non-technical stakeholders, bridging the gap between research and practical application.
• Strong analytical and problem-solving skills, with a focus on developing innovative solutions for LLMs.
• Self-motivated and able to work independently, managing multiple tasks and projects in a fast-paced environment.
• Strong collaborative skills, with experience working in cross-functional teams.
• Keen attention to detail and commitment to high-quality deliverables.
• Understanding of ethical considerations and best practices in AI research, particularly concerning data privacy and security.
• Ability to code-switch effortlessly between talking business and talking tech, and can help stakeholders, engineers, and businesses easily understand difficult research tech concepts.
• Experience in AI model testing methodologies, including robustness, fairness, and explainability assessments, as well as understanding data privacy and security considerations in AI.
• Good understanding of relational database and Unix shell scripting skills.

We regret to inform that only shortlisted candidates will be notified.

The Senior System Engineer is responsible to provide operational support to system infrastructure, support to the clients and resolution of technical issues and conducting root cause analysis. He is also required to manage change request through changes requests processes including requirement gathering, impact analysis, design, testing to integrate the change to existing environment.

Expected skillsets >10 yrs: Wintel, Linux, Solaris, VMware, Veritas Netbackup Enterprise, EMC Avamar/Networker Project Delivery

• Gather business and/or application requirements on the infrastructure, conduct impact analysis, suggest design/re-design to integrate the change into the existing environment

• Test systems in accordance to specifications & service level. Where relevant, perform the necessary system programming & configuration

• Manage systems changes through established change request process & provide status reports to the relevant parties

• Respond promptly to incident, investigate & provide temporary &/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties

• Conduct root cause analysis & implement pro-active measures. Monitor effectiveness of implemented measures

• Monitor & measure the performance & availability of systems proactively;

• implement corrective actions identified to improve performance & availability

• Monitor the agreed service level (.e.g. service request, system availability), document & maintain the configuration of the systems; provide regular reporting to relevant parties

• Execute service continuity measures, e.g. backup/restore procedures & disaster recovery plan dry run to ensure continuous operation of the business

• Ensure the management of ICT systems adhere to established ISO20000 & ISO27001 processes / procedures and ITIL best practices / ITSM and methodologies (e.g. change management, release management, incident management, problem management, configuration management)

• Manage budget, resources and schedule for system implementation / operation activities; ensure deliverables meet client requirements and quality standards

• Established facility management standards/best practices to ensure operation consistency across project/facility management teams

Customer /Team Management

• Provide systems related technical advice to customers or project team. Lead and assist in the development of bids and proposals

• Manage support resources to prioritize task allocation and schedule resource to ensure that services are not impacted

• Liaison with other associated project teams to ensure that the service is monitored, secured and operating at its optimal level

Deployment Phase

• Involve in the design, build and test of the environment infrastructure for Exchange, Lync, Ironport and other associated peripheral to deliver the whole Messaging and collaboration service

• Involve in the design, build and test of the environment infrastructure for Redhat, Google Apps, VMWare, GSA and other associated peripheral to deliver the whole Messaging and collaboration service in the cloud

• Involve in migration of users from old infrastructure to new infrastructure and manage the allocated resources to ensure successful migration

Production Support

• Ensure that the operation for Infrastructure Services are running smoothly and manage vendors such as hardware and software providers for hardware replacement and performance tuning and capacity planning

• Required to be on standby for escalation of major incident and ensuring that incident are handled according to SOP and addressed promptly