• Respond and handling of customer requests/queries
• Incident resolution
• Change and Service Request fulfilment
• Problem ticket closure
• Preventive maintenance tasks fulfilment
• Vulnerability assessment
• To assist the Team Lead/Operations Manager to train and guide junior team members
• Develop and enhance NOC team capability

Responsibility

• Analysing, troubleshooting and correcting network problems remotely and on-site
• Responsibility for documenting incident RCA report the configuration of the system and (network) system performance tuning
• Responsibility for security compliance, patching, health check & hardening remediation
• Maintaining and administering perimeter security systems such as firewalls and intrusion detection systems
• Performing standard or project change request as per change window
• Provide on-call 24 x 7 support on a rotating basis
• Responsible for applying operating system updates, patches, and configuration changes
• Perform Preventive Maintenance
• Participate in customer weekly sessions

To Apply:

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. <https://go.persolkelly.com/job/apply/7194>

We regret to inform that only shortlisted candidates will be notified.

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tac and the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg No : R22110511 | Teh Chee Hoong

The L1 System Engineer is responsible for:

• To provide 24 x 7 support for Data Center running on 12 hours shift
• Assisting the Customer in the verification, isolation and/or provision of a temporary work around for the incident/problem logged.
• Resolving the incident/problem onsite.
• Escalating unsolvable problems and service requests to the System and/or Software Engineer and reporting the escalation to the Project Manager.
• Generating the relevant administrative records and reports.
• Introducing and integrating new technologies into existing environments.
• Applying operating system updates, patches, and configuration changes.
• Adding, removing, or updating user account information, resetting passwords, etc.
• Answering technical queries
• Maintaining the configuration of the system.
• To implement Service Request and Change Request
• Contacting OEM/Vendor for technical support

Requirements:

• Diploma / Degree in Computer Science, Computer Engineering, Information Technology
• Preferably with Microsoft Certification and/or ITIL certification.
• Good Knowledge of following products will be advantageous:
• -Linux
• -Unix
• -Active Directory/DNS
• -Microsoft Azure Stack
• -Microsoft Windows 2008-2016
• -Commvault Backup and Recovery
• -Symantec Endpoint Protection
• ITIL certification will be an advantage.

Interested candidates, please forward a detailed resume and email to career{a}tempserv.com.sg

Tempserv Pte Ltd

License No: 06C3745

Attention: Wee Wan Qi / EA Personnel No: R22109446

Summary:

• Basic up to $6000 (Senior), $5000 (Junior)
• Performance bonus
• Location: AMK / YCK / Central
• 5 days work week
• Familiar with ACMV
• Career advancement & stability

Key Responsibilities:

• Manage and lead the electrical team
• Perform engineering duties: design, engineering calculations, planning, tender and etc
• Perform testing and commissioning of ACMV electrical system
• QA/QC
• Resolve any technical issue during any stage of the project
• Liaise with clients, project manager, contractor and etc
• Ensure the team follows all electrical codes and standards
• Other relevant ad-hoc duties

Key Requirements:

• Min 5 years of relevant experience in Construction Electrical field, including testing and commission
• Familiar with ACMV

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Marine Engineer (Senior, A1 main contractors)

Join one of Singapore’s leading A1 main contractors with over 20 years of excellence in the industry. Our client boasts a remarkable portfolio, including private residential, mixed development, commercial, and infrastructure projects, as well as some of Singapore’s most iconic landmarks.

They are currently hiring a Senior/Site Engineer (Marine) to support an iconic mixed-development project. This position offers a 5.5-day work week and performance bonuses.

Key Responsibilities:

• Prepare and manage construction documents such as RFIs, Method Statements, Risk Assessments, Safe Work Procedures, and shop drawings.
• Ensure the timely submission of progress reports to consultants and clients, adhering to project specifications.
• Interpret and analyze project specifications across civil, structural, architectural, and M&E disciplines.
• Monitor construction activities and compile detailed site reports (daily, weekly, and monthly) to track progress and maintain quality standards.
• Schedule and coordinate site inspections with Resident Engineers and Technical Officers to ensure compliance with project and safety requirements.
• Attend weekly and monthly safety meetings and discuss site-related issues with clients.
• Enforce health and safety regulations, ensuring adherence to company and project standards throughout the lifecycle.

Qualifications:

• Bachelor’s Degree in Civil or Structural Engineering
• Min 3 years of relevant experience in marine or infrastructural construction, with a preference for dredging, piling, jetty, or near-shore projects. Candidates with over 5 years of experience may qualify for the Senior Site Engineer role.
• Proficiency in Microsoft Office, Microsoft Project, and AutoCAD.

Office Location: Central Singapore

Interested candidates kindly forward your CV to [email protected] (Tay Pei See (Tracy), Reg No: R1871401). Feel free to forward this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

Roles and Responsibilities:

• Full stack developer, backend development (using ASP.Net core), frontend development (using HTML/CSS, JavaScript or similar) and mobile app development (using Xamarin or similar).
• Database design and manage (using SQL or similar).
• API Integration.
• Troubleshoot and debug application.
• Basic setup and troubleshot of Network switches and able to perform network check and IP address configuration of network devices.
• Carry out routine and preventive maintenance of control systems and network systems.
• Closely collaborate with Project Manager and Engineers to support the project.
• Provide information and prepare reports by collecting, analysing and summarizing of the control system.

Requirements:

• Diploma or Degree in Computer Science, Software Engineering or Mechatronic Engineering or other similar disciplines.
• ASP.Net core, including MVC framework, Web APIs, identity and entity framework core for database integration.
• Knowledge in SQL database design and optimize.
• Relevant experience in development of computerized maintenance management system (CMMS), notification system and payment system will be a plus.
• Knowledge in PLC/SCADA, ladder diagram, and electrical drawing will be a plus.
• Good interpersonal skills & positive working attitude, team player.
• Able to work under minimum supervision.
• Familiar with Microsoft office.
• Able to support night shift.

Executive Summary

Smart IMS Inc provides Digital technology & Cloud transformation services, Application & Infrastructure Management Services, Unified Communications and Insurance implementation services to customers across the Americas, Europe, Middle East, and Asia-Pacific regions. As the trusted technology and business partner of leading MNCs, including Global Investment Banks, Smart IMS is also a Microsoft Gold Certified Partner, Oracle Platinum Partner and AWS MSP Partner.

We are looking to hire a VMware Engineer to support our client in Singapore which is a top global investment bank. The role of the incumbent is to handle the installation, configuration and management of the VMware private cloud computing platform. With his knowledge and skills, he/she can suggest amendments in the current installation / configuration procedures, which are more beneficial to the respective implementation project(s) at hand.

Responsibilities:

• Involved in the installation, configuration and management of VMware private cloud computing platform
• Install new components into production environment as laid out by Virtualization Engineering Team(s)
• Make configuration amendments into the existing production plant
• Ability to present ideas in business-friendly and user-friendly language appropriate to both executive and managerial audiences.
• Ability to effectively manage relationships with other implementation teams, application teams, stakeholders, business and customer representatives.
• Organizational skills with attention to task details, documentation and target dates.
• Strong written, oral, and interpersonal communication skills.
• Team orientated, willing to share knowledge and collaborate with peers.
• Proven analytical, strategic vision drawing on strong problem-solving abilities.
• Able to prioritize and execute tasks in a high-pressure environment.
• Ability to conduct research into server, storage, virtualization issues, standards, and products.

Requirements:

• 5-7+ years of previous experience Implementing / Architecting & virtualization experience, across multiple vendor and technologies.
• In-depth understanding of Cloud, Server, Storage, and Virtualization architecture design techniques, theories, principles, and practices.
• Solid experience in implementing enterprise Cloud, Virtualization, Server and Storage systems within a broad spectrum of technologies.
• Excellent Knowledge of Private, Public and Hybrid Cloud environments
• Excellent Knowledge of Cloud Orchestration platforms
• Intermediate knowledge of Windows Server, Linux, in HA/DR type configurations.
• Excellent knowledge of Sever hardware platforms: x86
• VMWARE Cloud, Virtualization, Server and Storage vendor Certifications Preferred.
• Strong knowledge & working experience of VMWare modules such as ESXi, vSphere, vSAN, vRA, VRO, VROPs, vRLI, NSX-T, Horizon View
• Strong knowledge of SAN, NAS, DAS, RAID, SCSI, Fibre Channel, Backup to Disk, clustering, encryption technologies from multiple vendors.
• Strong proficiency in PowerShell, Shell scripting / Python / Ansible development

Working Day: Mon to Fri 8.30pm- 5.50pm

Salary: $3500 - $4000

Location: Bedok office & client site

Job scope:

• To provide necessary post-project application software support to the client
• Troubleshoot, debug, enhance and optimise programs
• Develop new applications

Requirements:

• Candidate must possess at least a Diploma or Degree in Engineering, Computer Science/Information Technology or equivalent.
• Knowledge in Oracle PL/SQL, Oracle Pro-C programs, Unix ANSI C, visual basic.net using Visual Studio 17, Unix scripting
• At least 1 year relevant experience in end user and operation support

Low Jia Yi R22104302

The Supreme HR Advisory Pte Ltd 14C7279

We are hiring an Asst Engineer/Engineer to maintain and ensure live systems are up and running smoothly 24/7. Candidates should be equipped with technical disciplines in System-Level Maintenance with knowledge of Radio Communications, Basic Networking Skills, Computer/Servers Management, Embedded Systems and/or UPS.

Responsibilities:

Involve in one or more teams in supporting and maintaining systems.

• Report to the Team Lead/Service Delivery Manager to fulfil contractual KPI.
• Assist Team Lead/Service Delivery Manager to deliver contract deliverables within budget.
• Able to operate and thrive in a dynamic work environment where you are required to liaise with both internal and external stakeholders.
• To perform routine Preventive Maintenance in accordance with the maintenance instructions / procedures.
• To carry out Corrective Maintenance in accordance with the maintenance instructions / procedures.
• Liaison with procurement and vendors.
• Perform after-office hour standby for fault activation.
• Arrange and attend monthly meetings with customers.
• Provide engineering services and support to facilitate equipment adequacy, obsolescence, configuration and design.
• Provide or recommend technical solutions to mitigate Radio Frequency Communication systems/equipment failures.
• Required to travel and work at customer premise(s).

Requirements:

• Higher Nitec or Diploma in Electronics/Electrical/Mechatronics/Computer Engineering or equivalent.
• Positive work ethics and team player.
• Takes ownership of responsibilities.
• Thrive in multi-disciplinary and cross-functional environments.
• Able to work effectively in an indoor and outdoor environment.
• Preferably with some knowledge in Data Analytics (e.g. failure trending/patterns).
• Preferably with experience in System-Level Maintenance in the following disciplines: (Radio Communications, basic networking skills, computer/servers, embedded systems and/or UPS). Other Engineering-related experience maybe considered.
• Evident in written, verbal and interpersonal skills.
• Proficient in MS Office (Words, Power-point & Excel).
• Preferably with Class 3 Driving License.

Other Information:

• Office working hours (0830H to 1800H).
• 5 Days work week with standby / Recall duties required (allowances provided)
• Required to climb up and down due to need to work at height, if required and carry heavy equipment.
• Fresh graduates are welcome to apply.

Interested candidates, please forward a detailed resume and email to career{a}tempserv.com.sg

Tempserv Pte Ltd

License No: 06C3745

Attention: Wee Wan Qi / EA Personnel No: R22109446

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Production Engineer

• Working hours: 5 Days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong East MRT)
• Salary Range: $4500 - $6000

Position Summary:
The Production Engineer is responsible for improving the production technology of the EVAL site which will be launched in second half of 2026. The Production Engineer supports the production team for identifying, investigating, and resolving production issues in technical aspects. The Production Engineer leads technology for process control (DCS, SIS), operation condition, and product quality improvement and joins project work related to production technology development and improvement. Until the startup of EVAL production line, training and learning opportunities of EVAL production technology is provided by experienced members in Company. The Production Engineer will be a member of the commissioning and startup team of new EVAL plant and is responsible for designing and optimizing the process condition and process control system (DCS) and supports other production team members to achieve safe and stable commissioning and startup of new EVAL plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Minimum Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in Chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Preferred Requirements:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction process, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programming and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Key Responsibilities:

• Team Leadership: Manage and mentor a development team of 5 – 10 members.
• Project Management: Provide accurate estimates and oversee project deliverables .
• Frontend Development: Lead front-end development using Node.js, JQuery, Bootstrap, and related tools
• Technical Expertise: Utilize Java, Python, Groovy & Grails, Spring MVC, Hibernate, and other frameworks for full-stack development.
• Banking Experience: Develop secure and compliant banking-related applications.
• Quality Assurance: Conduct code reviews and maintain coding standards.
• Consulting: Propose technical solutions to client challenges and improve system efficiency.
• Product Demonstrations: Present project outcomes to clients and stakeholders.

Qualifications and Skills:

• Experience: 10+ years in software development projects, with a strong focus on banking solutions.
• Leadership: Proven ability to lead development teams of 5 - 10 members.
• Banking Expertise: Hands-on experience with banking systems, processes, and compliance.
• Technical Skills: Proficient in Java,Python, Groovy & Grails, Spring MVC, Hibernate, and frameworks like Node.js
• Frontend Development: Expertise in JQuery,Bootstrap, BackboneJS, and related tools.
• Database: Experience with Oracle,PostgreSQL
• Communication: Strong ability to manage client expectations and liaise effectively.

Responsibilities:

• Design of hydraulic schematics
• Sourcing and sizing of components
• Modelling and drafting using CAD software
• Generate the EBOM and prepare design documents
• Integrate and testing of hydro-pneumatics system

Requirements:

• Keen interest in Mobile System Hydraulics and Pneumatics engineering and technology
• Must be competent with CAD Software such as Unigraphics and SolidWorks
• Knowledge in drafting, geometric dimensioning & tolerancing (GD&T) preferred
• Able to read and interpret fabrication/ mechanical/ assembly drawings
• Able to read and interpret electrical/ hydraulics/ pneumatic schematics
• Strong analytical skills is a plus
• Possessing a valid class 3 license is a plus
• Able to work independently and effectively with peers, resourceful and keen to learn
• Must be a team player with good communication skills
• Willing to perform hands-on work in the workshop/on the vehicle

• Position : Senior Project Engineer (Building & Construction/Civil Engineering) - Up to $7,500
• Location : Resorts World Sentosa
• Working hours : Monday to Saturday | 8am to 5pm
• Salary (commensurate with experience) : Up to $7,500 + Performance Bonus + Transport Allowance + 14 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Engineering & Construction

Main Responsibilities:

• Monitor and manage the day-to-day operations of project
• Create project plans, schedules and budgets
• Liaise with Subcontractors, Surveyors and Site Supervisors/Foremen to make sure that works are carried out in time and smoothly on site
• Attend regular meetings with Owner/Client/Contractors/Subcontractors on the project related matters
• Carry out site inspection and ensure that the works are executed to the required quality standards

Requirements:

• Degree in Civil Engineering or equivalent with minimum 4 - 5 years of working experience in Building & Construction Industry.
• A team player with positive working attitude
• Bilingual in English and Mandarin to communicate with Chinese clients who can only speak mandarin.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Key Responsibilities:

• Partner with multidisciplinary teams to craft, build, and launch top-tier software applications, spanning mobile and web interfaces, as well as corresponding backend systems.
• Advocate for and implement industry-leading software development methodologies, including collaborative coding, peer review, and test-driven development.
• Spearhead technical forums, design system architectures, and coach team members to cultivate expertise and excellence.

Requirements:

• A minimum of 5 years of experience as a full-stack developer, with a demonstrated history of delivering high-performance, scalable solutions.
• In-depth knowledge of modern web development frameworks, including ReactJS, NextJS, TypeScript, and Kotlin/Java.
• Skilled in designing, implementing, and managing continuous integration and delivery pipelines, with expertise in deploying applications on cloud-based platforms such as AWS.
• Familiarity with database migration tools and techniques is a plus.
• Experience working in Agile/Scrum environments is also desirable.
• Excellent verbal and written communication skills, with the ability to clearly articulate complex technical concepts.
• A self-driven and proactive individual with a strong passion for innovation and continuous improvement.

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R21102607

Business Registration Number: 201735941W

Licence Number: 18S9037

http://www.dadaconsultants.com/

—------------

EA License number : 20S0283

EA Personnel : R1332294

• Responsible for assembly of optics assembly or optical-mechanical assemblies
• Adjusts, calibrates, aligns, and modifies optical-mechanical assemblies and components and records effects on unit performance
• Troubleshooting, repairing and testing of optical-mechanical systems

Requirements:

• Diploma in Mechatronics, Mechanical, Electronics or equivalent. Entry level position is available.
• Experience using jigs and fixtures to align and bond optics with high precision
• Experience with methods of handling and cleaning optic elements
• Good team player and yet able to work independently
• Work location: Ang Mo Kio
• 5 days work-week, normal office hours

Interested candidates, please forward a detailed resume and email to career{a}tempserv.com.sg

Tempserv Pte Ltd

License No: 06C3745

Attention: Wee Wan Qi / EA Personnel No: R22109446

• Patching for server (2008, 2012, 2016, 2019)
• Patching for Laptops & Pc using patching tools eg sccm, big fix
• Hands on exp with SCCM Products (Microsoft , Big Fix)
• VMware
• Powershell or Windows Scripting knowledge required

To Apply:

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. <https://sg.go.persolkelly.com/job/apply/10187>

We regret to inform that only shortlisted candidates will be notified.

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tac and the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg No : R22110511 | Teh Chee Hoong

Job Description

• Industry/ Organization Type: Refrigeration and Air-Conditioning System Provider
• Position Title: Engineer (Sales & Project in HVAC Equipment and Refrigeration system)
• Working Location: East – Ubi (Walking distance from Ubi MRT to the company)
• Working Hours: 5 days (Monday to Friday 8.30 am-5.30 pm)
• Salary Package: Up to SGD 5000 + AWS + Performance Bonus + Commission
• Duration: Permanent

Key Responsibilities

Project

• Design, plan, and manage the testing, commissioning, and supervision of HVAC & Refrigeration projects in accordance with project plans, specifications, and contracts.
• Develop and maintain design documentation, submittals, and re-estimation reports. Ensure thorough project documentation and provide regular updates to management on project status.
• Perform site surveys to determine the placement of pipes, ducts, and control panels, attend site meetings, and ensure adherence to safety regulations while monitoring construction progress.
• Collaborate with consultants, contractors, suppliers, and governing bodies to ensure seamless project execution.
• Execute testing, commissioning, and quality assessments to guarantee the functionality, dependability, and safety of HVAC systems. Troubleshoot, repair, and maintain system components.
• Support clients in enhancing energy efficiency, troubleshooting issues, and offering post-installation assistance.
• Create 2D engineering and electrical diagrams using specialized software.
• Control material and labour expenses to align with budget constraints.

Sales

• Analyze market trends, observe competitor activity, and identify emerging market segments and potential customer profiles.
• Engage with customers, follow up on leads, and nurture client relationships to drive acquisition and retention.
• Formulate and implement sales strategies, negotiate agreements, and provide technical support both before and after sales.
• Compile comprehensive sales reports and work collaboratively with internal teams to ensure seamless delivery of services and customer satisfaction.
• Advocate for the adoption of innovative technologies and participate in ongoing improvement initiatives.

APPLY NOW!!!

• Min. Diploma in Engineering.
• Min 2 years of working experience in sales, servicing or project management for HVAC.
• Strong understanding of mechanical or electrical systems and technologies, with the ability to communicate technical concepts effectively to non-technical audiences.
• Willing to travel overseas as needed for onsite client meetings, presentations, industry events as required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69657 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Review project specs to ensure equipment meets contract requirements
• Prepare and approve instrument and electrical deliverables (e.g. wiring diagrams, lists, data sheets)
• Create material requests and evaluate bids for electrical and instrument equipment
• Develop engineering standards and procedures for design
• Monitor project costs and schedules
• Attend technical meetings and address client feedback
• Support plant start-up and on-site troubleshooting
• Provide technical support and estimates to the sales team
• Advise engineers and Project Managers
• Follow company health and safety guidelines

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5 years of relevant experience
• Familiar with key engineering concepts and practices
• Strong organizational and multi-tasking skills
• Excellent problem-solving and analytical abilities
• Proficient in Microsoft Office, Microsoft Project, and AutoCAD
• Strong verbal and written communication skills
• Able to work independently with attention to detail
• Good teamwork skills
• Knowledge of hazard area classification
• Fluent in English (speaking and writing)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

Position Title : Maintenance Engineer

Salary Range: $3000 - $4000

Working Days: 5 Days (Mon - Fri)

Working hours : 7:30am to 5:15pm

Working Location: Tuas

Job Responsibilities

• Monitor the machines and company equipments operational performance and condition
• Conduct preventive maintenance to machine and company equipments as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipments
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Accountable

• Meeting department quality objectives
• Ensure maximized machine uptime
• Ensure planned preventive maintenance is carried out effectively to minimize machine down time
• Ensure sustainable continuous improvement initiatives are carried out on machine, equipment and facilities

Job Requirements

Skill Requirements

• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Education, Experience & Training

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years experiences in machine repair and maintenance

Training Requirements

• Quality Management and its related Quality Procedures

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

☑ Basic $ 4500 - $ 6000

☑ MNC - High Variable Bonus.

☑ 5 Days (Mon – Fri: 8.00pm – 5.30pm / 8.30am – 6pm )

☑ East Region – A1 Builder

Job Description

• Develop and manage project schedules from design to commissioning.
• Estimate durations, resources, and prepare progress reports.
• Handle tender submissions, site planning, and progress monitoring.
• Manage EOT claims and oversee RI/TOP schedules and handovers.

Job Requirements:

• Diploma/Degree in Civil Engineering or related
• Min 3 years of experience in construction planning building-related facilities.
• Proficiency in MS Project Planner, Primavera, or Synchro.

Interested applicants are welcome to apply or send your updated resume to [email protected]

Only shortlisted candidate will be notified

Kam Soo Leng, Yvette

Registration: R22107492

• Contribute to the completion of project milestones, organize own work to meet project task deadlines and communicate progress on scheduled projects.

• Lead or support major equipment related investigations and implement equipment corrective or preventative action and performance improvements.

• Organize testing associated with the development of new process technologies and the support of new product introductions and tech transfers.

• Ensure integrity and compliance of data according to Standard Operating Procedures.

• Coordinate all work on scheduled projects (personnel activities, documentation and outside resources).

• Perform other tasks necessary to support site compliance to Center and regulatory requirements.

• Support cleaning program by performing swabbing and visual inspection of equipment.

• Assist in document preparation and training.

Interested applicants please email a copy of your resume to [email protected]

Tele @jesswongie OR WA 96503173

Jessie Wong Yuan Si

Personnel EA License No.: R2197171

Recruit Express Pte Ltd (EA Licence No.: 99C4599)