ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Ship electrical system design
• Electrical Load Schedule
• Electrical Single Line diagrams
• Short Circuit calculation
• Circuit breaker calculation
• Electrical equipment selection
• Electrical cable schedule, Cable tray layout, MCT design, cable route preparation, termination diagram
• Preparation of electrical material take off
• Possess good knowledge in automation integrations such as vessel ISCS, VRCS, AMS, etc.
• Prepare design drawings and documentation
• Project management, Project scheduling, client interaction, site visit (client office, ship, etc)

REQUIRED QUALIFICATIONS AND SKILLS

• Bachelor Degree in Electrical Engineering
• At least 3 years of working experience in the marine sector

Job Description

• Industry/Organization Type: Manufacturing/Production
• Position Title: Technical Support Engineer (Electronics)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8.30 am – 6 pm
• Salary Package: Up to $4,500 + VB
• Duration: Permanent

Key Responsibilities

• Manage technical transfer of products/projects in assembly and testing, including coordination with customers.
• Provide ongoing technical support in manufacturing and testing phases to optimize product builds.
• Assist the Quality Control (QC) team in resolving Return Material Authorization (RMA) issues.
• Support the Quality Assurance (QA) team in matters related to compliance, regulatory requirements, customer interactions, and audits.

APPLY NOW!!!

• Minimum of a Diploma in Electronics Engineering.
• At least 2 years of relevant work experience in the electronics manufacturing industry.
• Technical competence in handling manufacturing, project transfers, and troubleshooting within a production environment.
• Experienced in PCBA manufacturing and testing.
• Ability to communicate effectively with customers on technical matters.
• Experience working in an ISO13485 and FDA-regulated manufacturing environment is preferred.
• Strong communication and problem-solving skills.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69907 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Join us as we pursue our exciting new vision to make machine data accessible, usable and valuable to everyone. We are a company filled with people who are passionate about our product and seek to deliver the best experience for our customers. At Splunk, we’re committed to our work, customers, having fun and most importantly to each other’s success. Learn more about Splunk careers and how you can become a part of our journey!

As a Splunk Solutions Engineer (SE), you’ll be the primary technical resource for the assigned Enterprise accounts specifically covering the regional assigned market Indonesia. Our clients and partners span all business sectors and sizes.

This is an opportunity to work at a company that is changing the way information supports business decisions. You will be responsible for actively driving and running the technology evaluation stage of the sales process, working in conjunction with the sales team as the key technical advisor and advocate for our products and services.

Splunk Sales Engineer will answer technical inquiries from customers regarding Splunk technology, features, solutions, applications as well as eloquent Splunk technology and product positioning to both business and technical users. You will identify all technical issues of your assigned accounts to assure complete customer happiness through all stages of the technical sales cycle, and you should also establish and maintain positive relationships with our customer's technical staff. You will work closely together with the Partners, responsible for the opportunity if required.

Responsibilities: I want to and can do that!

• Demonstrate Splunk products and services to customers on site, remotely via webinar sessions, and at field events such as conferences and trade shows
• Willing to travel to visit partners, prospects and customers, and to engage in onsite customer and partner work when required
• Experience responding to functional and technical elements of RFIs/RFPs is also relevant.
• High-reaching with a proven record in technical software/hardware sales and knowledge of technology
• Strong presentation skills and able to communicate clearly and expertly
• Ability to be organized and analytical, and eliminate sales obstacles using creative and adaptive approaches
• You should be comfortable working for a multifaceted technical organization with a fast-growing partner and customer base

Requirements: I’ve already done that or have that!

• At least 5 years of proven experience in selling and supporting software products to IT organizations
• Experience in delivering sales and technical enablement workshop or webinar to customers
• Proficient in either IT Security or DevOps solutions.
• Experience and familiarity with IT management products and services.
• Experience with networking, server, application and development technologies
• Domain expertise with IT Operations, Application Management and/or security/compliance is desirable.
• Indonesia Bahasa speaker

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to perform modelling and real-time simulation of electric vessel’s onboard microgrid and propulsion system.

Key Responsibilities

• Participate in and manage the research project with Principal Investigator (PI), Co-PI and the research team members to develop onboard microgrid simulation models with energy management systems as well as to plan and test the relevant hardware systems.
• Work with research team to deliver the work scope and undertake these responsibilities in the project.
  Work Responsibilities:
  1. Develop detailed electrical models of the microgrid (power system) of various e-vessels based on the concept design in a simulation environment such as Matlab/Simulink.
  2. Design and develop an intelligent energy management system for the e-vessel microgrid for coordinated control of multiple energy sources considering cost, carbon, and operation constraints.
  3. Operate the simulated electrical model with EMS controller to perform simulations for various cases to demonstrate performance and recommend improvements at unit, sub-system and whole system level.
  4. Implement and carry out simulation studies for onboard microgrid and connection to shore charging infrastructure.
• Recommend efficient and reliable power system architecture(s) with other merits of high-density and light-weight.
• Test the relevant power electronics and drives system hardware and troubleshoot the challenging problems.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment and assist in laboratory management.
• Mentor students involved in the research project
• For those hired at senior levels, management responsibilities may be included

Job Requirements

• Have a Master’s or PhD’s degree in Electrical Engineering or equivalent from a recognized University. Major in Power Engineering will be advantageous.
• Minimum 3 years of relevant experience in modelling and energy management algorithm development using MATLAB/Simulink for microgrid applications.
• Knowledge of power electronics, drives, and control is highly preferred. Hardware testing experience will be advantageous.
• Have experience and commitment to participate in project meetings.
• Self-motivated team player and good project management skills.
• Excellent writing, communication, presentation, and interpersonal skills.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Role:

Production Engineer (Mechanical / Manufacturing)

• Singapore Based (Senoko, Sembawang area, company transport provided)
• 5 Days work per week (8am to 5.30pm)
• Salary: Up to $3100 + Allowance + AWS + VB
• Degree in Mechanical/Manufacturing Engineering or equivalent + 1 year with relevant experience is an added advantage.
• Knowledge on TS/IATF 16949, OHSAS18001, ISO14001, SPC, FMEA and TPM will be added advantage.
• Require putting on jumpsuit and protective mask as Personal Protective Equipment whenever it is necessary. + Willing to work overtime when needed
• Career Progression Opportunities

Responsibilities

• Responsible for production operation activities to ensure smooth and efficient manufacturing process.
• Liaise with cross functional department on effective corrective/preventive actions, including carry out improvement activities such as process optimization, benchmarking, etc through various statistical tools and software.
• Handle audit in accordance with TS/IATF & ISO and OHSAS requirements

#SCR-vicky-wee

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

• Mentorship, guidance, and training will 100% be provided
• Great for fresh grads who want to start out in the engineering field

• Responsibilities:
• Design, prepare shop drawing, methods statements, quality installation, inspection, testing and commissioning, documentation works for BMS system.
• Site coordination, project schedule planning, coordinate site works
• Design and deploy BMS controlling and building automation system.
• Project Management and attend project meeting.
• Provide training to customers.
• Provide testing and commissioning services

Requirements:

• Min Diploma / Degree in Engineering (Mechanical / Electrical Engineering / Construction / Building related)
• Able to define BMS project work scope, requirements and specifications, and identify, allocate resources for executing the project from start to completion.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9957 or 9178 0355 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

IT Support Engineer

• Salary Range: $4,000 - $4,500
• Working Days: 5 Days Mon-Fri 8.30AM-6.00PM
• Location: Siglap

Job Summary

• Provide 1st and 2nd Level IT Support to end-users
• Manage IT assets through procurement, tracking, maintenance, refresh/renewal and disposal/ termination.
• Provide assistance in the implementation of new end-user computing technologies

Responsibilities:

• Provide 1st and 2nd Level IT Support to end-users
• Provide end-user IT support for both local and remote locations daily to ensure smooth business operation including end-user computing device performance monitoring
• Perform installation, configuration and maintenance of computers, workstations, applications and other related equipment and devices
• Perform IT asset lifecycle management including tech refresh, preventive maintenance (Eg. Laptops / Printers) and software license monitoring
• Responsible for the procurement of IT equipment, software and related products including administering procurement processes and supporting in requirements scoping and evaluation
• Manage IT vendors (service quality, feedback, improvements) and service contracts
• Provide assistance in the implementation of new end-user computing technologies
• Any other IT duties as assigned

Requirements:

• Recognized Diploma or Degree in Information Technology or equivalent
• Minimum 3 years of experience in providing IT support to end- user community
• Experienced in troubleshooting IT issues at L1/L2 support levels and escalating to higher levels of IT support

☎️ Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.
• We are looking for people who
• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

About the role

Works closely with and have impact on: Global Research & Development (R&D), Post Market Surveillance, and Global Regulatory Affairs (RA) Teams

Reports to: Senior Manager QA R&D

Function: Global QA & Compliance Organization

Work Location/Site: Singapore / Global Headquarters

Role Overview

This position is responsible to ensure that products meet quality goals and regulatory requirements, including but not limited to FDA Regulations, ISO 13485, EU MDR requirements, and Risk Management per ISO 14971 and maintain compliance of the Quality Management System (QMS).

Duties and Responsibilities

• Partner with R&D teams in the USA, Japan, and Singapore to ensure that design control is completed in accordance with procedures, WI, regulatory requirements, and assure that required outputs have been completed
• Execute risk management for devices, processes, and provide the assessment results from product development through to the launch
• Maintain and update risk management files with Global R&D/Manufacturing Engineering (ME) teams to support product development (Risk Management Plans, Risk Control Log, Benefit Risk Assessment Risk Management Report, xFMEA, etc.), and act as the Risk Management expert
• Assist in the review and approval of design development plans, verification and validation protocols, reports, master V&V plans and reports, and design transfer
• Review and approve design verification test protocols, reports and data from a logical point of view (Compliance, rationale, objectiveness and statistics)
• Partner within Quality and R&D to ensure design control documentation (Risk Management, Traceability/Linkages) & design change control requirements are met
• Review and approve biocompatibility protocols and reports
• Ensure compliance of IQ, OQ, tests method validation, Standard Operating procedures and work instructions regarding product development
• Maintain compliance to QMS procedures of the R&D Singapore site, and support the Singapore R&D Site - QA
• Support External audits by competent authorities and notified bodies
• Support internal audits at the local site, and other sites as required
• Review and approve other quality documents (e.g., IQ, OQ, PQ, WI, etc) within areas of responsibility
• Propose and execute quality/process improvements. Write/review policies/ processes/ procedures and related documents
• Manage and monitor the progress of the calibration and maintenance of testing equipment. Ensure calibration or maintenance records satisfy regulatory and QMS requirements (act as Equipment Control Administrator in Singapore)
• Participate in development projects and change control request meetings to support the resolution of engineering issues
• Collaborate with the post-market surveillance team and complaints investigation teams to maintain risk management process throughout a product’s lifecycle
• Provide support for other quality activities and improvement initiatives, quality data collection and trending, CAPAs, change controls, training, etc.
• Support initiatives as identified by management to support QMS and other regulatory requirements in Singapore

Requirements

Experience

• At least 4+ years of Industry experience working as QE Engineer in Medical Device/ Pharmaceutical product or optical engineering business field
• Experience in test method validation
• Experience in Design control, Design Transfer, Design and Development Process
• Demonstrated knowledge of Risk Management (ISO14971), Design control, Design and Development Process and Quality System (any one of ISO13485).
• Understanding and Knowledge of biocompatibility studies
• Experience in coordination and planning of complex activities and ability to identify and resolve complex problems through effective use of technical and interpersonal skills
• Product development experience (e.g. approaches for definition of requirements and specification setting for verification and validation). Practical experience in design control and risk management
• Effective use of oral and written communication skills to clearly communicate the quality position, and the actions necessary to resolve issues
• Interpersonal, team, leadership, and negotiation skills to handle conflicting priorities
• Strong oral and written communication skills, excellent interpersonal and cross-cultural skills required
• Capable of clearly presenting and justifying quality requirements to management
• Accreditation by a professional body is highly desirable. Examples include American Society for Quality (ASQ) Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE)

Skills/Accreditations

• Smooth communication ability
• Business software skills (e.g. Word, Excel and Power point)
• Experience with statistical software such as Minitab
• Voluntary working attitude with a creative idea
• Passionate working attitude to pursue a goal with patience.
• Flexibility for changes

Academic Qualifications

• A bachelor’s degree or higher in Chemical, Bioengineering, Mechanical, Optical Engineering or related fields.

Travel requirements

• 2-3 international travel annually mainly Thailand.

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

We are looking for a Staff Analog Layout Engineer to contribute to the development of High-Speed Connectivity, Broadband Analog and Computing/Storage-Memory Data-Transport products (including functional blocks such as high-speed digital, multi-GHz ADC/DAC, PLL/DLL serial and parallel I/O, and clock generation/distribution for custom ICs). The candidate must have a proven record of laying out high-performance analog circuits in state-of-the-art CMOS process technologies, successfully performed top-level integrations, and placed products into volume production multiple times.

Requirements

• Bachelor’s degree in Computer Science, Electrical Engineering or related fields and at least 5+ years of related professional experience.
• Master’s degree in Computer Science, Electrical Engineering or related fields with 3+ professional experience.
• Deep understanding of layout methodology from initial chip planning to tape-out.
• Deep understanding parasitic optimizing in layout
• Experiences in advanced process technology and Fin-FET is preferable.
• Have a high level of proficiency in interpretation of CALIBRE DRC, ERC, LVS, etc. reports.
• Have a high-level proficiency/knowledge of Synopsys or CADENCE layout entry tools.
• Programming skills in any of the following are a plus: Skill or Ample or Perl, etc.
• Strong technical and analytical background, problem solving skills, etc.
• Fluent in English

• Singapore Based (Bukit Merah)
• 5 Days 8.30am to 5.30pm
• Salary - $2500 to $3500 (Depends on experience)
• Nitec or Diploma in Electrical Engineering or Equivalent; At least 1 year experience in sales/customer service.
• Career Progression Opportunities

Requirements

• Nitec or Diploma in Electrical Engineering or Equivalent
• At least on year experience in sales/customer service
• Electrical Knowledge

Job scope

• Your job and responsibilities include support sales personnel for pre-sales activities, proposing solution that suits customer needs & resolve related solution for site preparation, installation, start-up, commissioning, repair and maintenance of Electrical Power System, Structural cabling, Fire suppression system, UPS, Security Access and CCTV Monitoring System etc.
• To supervise and oversee the work progress of project sites. This includes attending to site meeting, coordinating with appointed sub-contractors of various services to see to a smooth completion of projects.
• You will be assisting the Electrical Service Department in providing technical support to our staff, customers, and dealers.
• Prepare and maintain all project management documentation in accordance with company’s best practices.
• Planning and monitoring the project to ensure successful completion within planned timeline as well as status of progress-in-work and report all matters related to project and services.
• You are required to perform a complete in-house testing of Power equipment’s.
• Answer and attend to service calls, fault-finding, repair and troubleshooting of Electrical System and Power equipment malfunction.
• Establish and maintain excellent relationships with the customer project team, supplier, sub-contractors, and clients.
• Coordinate and liaise with PEs and/or site supervisors on detail drawings, layout planning and understanding of site requirements.
• Prepare, submit, and follow up with applications to the relevant authorities or building management where required.
• Preparation of electrical products data & engineering drawing in AutoCAD (2D, 3D).
• You may be assigned with other job duties and functions as may be instructed from time to time by your superior or the management.

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]

Mechanical Engineer requirements

Salary Range $3,500 - $5,000

Key Responsibilities

• Involved in full cycle mechanical design from conceptualization, designing, research and development.

· Evaluate final product’s overall performance, testing, reliability, safety and commissioning.

• Define design approach for new product and platforms and generate design specifications
• Execute new product designs personally, and oversee outsourced resources where appropriate
• Execute quick turn prototyping, 3D samples, debugging, verification testing, and performance characterization of new designs
• Support current platforms with enhancements and improvements where needed
• Support manufacturing engineering as necessary and provide appropriate tools and techniques to the service organization
• Execute/manage compliance testing and documentation
• Adhere to best practices for documentation and version control

Minimum Requirements and Qualifications

• Bachelor's degree in Mechanical / Mechatronics Engineering
• 5+ years hands-on design and development of Analog and Digital circuitry and/or embedded systems.
• Knowledge & Skills in SolidWorks, 2D and 3D software or more.
• Proficient with laboratory instrumentation, tooling fabrication, die-casting, extrusion, plastic injection moulding and metal stamping process.
• Utilize various tools of specialization (CREO/ DFM/ DFMEA/ Tolerance Analysis/ Simulation etc.) to design, validate and improve existing designs
• Proficient with MS Word, MS Excel, PowerPoint

Additional Qualifications

• Experience in LED, Automation , Thermal and optical design

• Performs specific and moderate portions of a broader assignment of an experienced engineer.
• Gathers and correlates basic engineering data using established and well-defined procedures.
• Works on detailed or routine engineering assignments involving calculations and relatively simple tests.
• Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignements.
• Identifies discrepancies in results.
• Provides guidance to entry level engineers.
• Performs work in accordance with agreed upon budget and schedule with little supervision.
• Independently performs all the tasks necessary to complete primary design
• elements for engineering works. 
• Performance at this level requires developmental experience in a professional position.

• Company located at Woodlands

• Working hour: 8:30am – 5:30pm (Monday – Friday)

• Variable Bonus + Excellent Welfare

• Well Established Industrial Automation Company (MNC)

Job Scope

• Analyze project requirements for industrial robotic equipment/machines.
• Design, and test electrical control systems for industrial automation.
• Create detailed electrical schematic drawings using E3 (or ePLAN as a second option).
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Provide on-site technical support during the installation and commissioning of robotic equipment/machines.
• Troubleshoot and resolve electrical and control system issues.
• Maintain detailed documentation throughout the project lifecycle.

Requirement

• Degree in Electrical Engineering / Control Systems Engineering or related disciplines
• 2 to 4 years of relevant experiences and roles in Industrial Automation
• Experience in programming motion controllers, robots, or touch panels is an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC Company
• Basic $3500 - $4000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working days: Monday to Friday
• Working hours: 8.30am – 5.30pm

Job Responsibilities:

• Perform regular maintenance and carry out diagnostic analysis for trouble shooting and repair work
• Handling of measurement and detection equipment for military and homeland security
• Handle sales product enquiries
• Manage post-sales delivery of equipment
• Prepare basic reports
• Any other tasks assigned by superior

Job Requirements:

• Possess minimum Higher Nitec and/or Diploma in Electronics and/or Electrical Engineering or relevant field with 2-3 years of relevant experience
• Possess IT software installation and configuration skills will be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description:

• Ensure chiller systems operate at optimal performance and efficiency.
• Provide exceptional service by addressing client inquiries and concerns about chiller operations and maintenance.
• Diagnose mechanical, electrical, and control system issues, implementing effective solutions.
• Educate clients on proper operation and maintenance practices to enhance the lifespan of their chiller systems.
• Prepare detailed reports outlining service activities, findings, and recommendations for improvements.
• Execute commissioning processes for new chiller installations, ensuring proper setup and functionality.
• Work with MHI agents, customers, and contractors to verify system performance and compliance with specifications.
• Foster collaborative relationships with contractors to encourage teamwork and shared problem-solving.
• Adhere to safety protocols and regulations, conducting safety briefings to ensure understanding of responsibilities.
• Perform field-based tasks in various environmental conditions, including outdoor settings.
• Be available for chiller breakdown calls during assigned standby shifts.

Job Requirement:

• Diploma and Degree
• 3-5 years of proven experience in chiller maintenance, commissioning, or related HVAC roles.
• Strong technical knowledge of chiller systems, HVAC principles, and electrical controls.
• Excellent problem-solving skills with a keen attention to detail.
• Strong communication and interpersonal skills for effective interaction with clients and team members.
  Ability to work independently and manage time efficiently.
• Completion of Building Construction Supervisors Safety Courses or equivalent certifications

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Ding Xin Er

EA Personnel Reg No: R22106669

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday - Friday: 8.30am to 6.00pm
• $ 4,000 - $6,000

Key Responsibilities

• Electrical Design: Collaborate on system requirements, develop schematics, select components, and design control logic for marine vessel propulsion/control systems.
• Commissioning and Integration: Oversee installation, testing, and validation of electrical systems.
• System Optimization: Analyze performance, identify optimization opportunities, and implement innovative solutions.
• Documentation and Reporting: Create technical documentation and commissioning reports.
• Regulatory Compliance and Safety: Ensure compliance with maritime regulations, industry standards, and safety guidelines.

Requirements

• Diploma/Bachelor's in Electrical Engineering or related field
• Relevant experience in electrical design/commissioning (marine propulsion/control systems preferred)
• Proficiency in electrical design software (AutoCAD Electrical, EPLAN) and simulation tools
• Knowledge of marine electrical systems, industry standards (ABS, DNV, IMO), and regulations
• Requires to travel overseas for commissioning activities (shipyards/vessels)

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Position Overview:

We are seeking a highly motivated Embedded System Engineer to join our team as a Research Engineer. The successful candidate will be responsible for selecting, programming, testing micro-controllers, and building corresponding circuitry and PCB for our cutting-edge research projects. This role offers an exciting opportunity to contribute to groundbreaking research in flexible electronics.

Key Responsibilities:

• Program micro-controller for realizing target functions.
• Design circuitry and PCB for corresponding micro-controller.
• Help with requirement analyse and micro-controller chip selection.
• Document design processes, results, and findings for academic publication.
• Stay updated on emerging trends and technologies in flexible electronics and related fields.

Qualifications

Qualifications:

• Master C/C++, have proficient embedded development and MCU development capabilities, and good programming habits.
• Familiar with communication ports, including UART, SPI, IIC and GPIO.
• Able to read hardware schematics, capable for driver writing and optimization, and familiar with Renesas, Nordic and STM32’s commonly used chips;
• Familiar with BLE working principle and commonly used BLE chips.
• Familiar with micro-controller developing tools (e.g. Keil, IAR)
• Experience with PCB design and proficiency in PCB design tools (e.g. Altium Designer)
• Bachelor's or Master's degree in Electrical and Computer Engineering, Electronics Engineering, Mechatronic Engineering, automation, or related field.
• Solid digital and analogue circuit knowledge foundation.
• Excellent problem-solving skills and attention to detail.
• Effective communication and collaboration abilities.

Preferred Qualifications:

• Expertise in MATLAB or Python for upper computer software development.
• Familiarity with biomedical signal processing or wearable electronics.
• Prior research experience in an academic or industrial setting.
• Additional expertise in wireless electronics design

Benefits:

• Competitive salary based on qualifications and experience.
• Opportunities for professional development and growth.
• Collaborative and innovative work environment.
• Access to state-of-the-art research facilities and resources.
• Potential for authorship on research publications, patents and presentations.

• Direct Contract
• Up to $6000 + Bonus
• Ang Mo Kio
• Monday to Friday (office hours)

Job Responsibilities :

• Closely collaborate with Project Manager and Engineers to support the fulfilment of contract obligations within timeline, cost, and scope
• Manage and oversee project documentations and subcontractor matters
• Perform System Setup, Database setup, resolve technical & design issues
• Support for IT infrastructure comprising Microsoft OS
• Basic setup of Network switches and able to perform network check and IP address configuration of all the network devices within the project
• Installation, Debug and troubleshooting IT-related issues

Job Requirement:

• Minumum Diploma in Project Management/ Computer Science / Computer Engineering in Information Technology, Information Systems, IT Security or Equivalent.
• Good interpersonal skills, strong organizational and coordination skills
• Experience in Project Management, IT Management Systems Deployment or Equivalent experience
• Proficient in Database, Cybersecurity, Networking and Windows OS

If you are interested, please submit your application here.

Thank you for your application and we regret that only shortlisted candidates will be notified.

“By sending us your personal data and curriculum vitae (CV), you are deemed to consent to P-Serv Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.p-serv.com.sg/priv.... You acknowledge that you have read, understood, and agree with the Privacy Policy.”

P-Serv Pte Ltd

EA License No: 90C3494

Uma Maheswari | EA Personnel: R2092012

You may also reach me at 81278347 for further information.

This is an exciting and fast-paced position! Our team Application Development & Support(ADS) delivers software solutions to leadership and engineers throughout Micron's global manufacturing network. As Operations Central Team (OCT) Software Development Engineer at Micron Technology, Inc., we have the chance to create and improve Micron systems and processes on a global scale.

We will collaborate with customers across departments and geographical sites to design, develop, innovate and support software throughout the development life cycle. Be part of the team to support efficient business processes by maintaining a focus on global alignment, and participating in efforts to research and influence technology roadmaps.

Responsibilities include, but not limited to:

• Demonstrate Micron core values People, Innovation, Tenacity, Collaboration, and Customer Focus
• Collecting requirements from customer requests
• Designing, developing, debugging, documenting, testing, and deploying applications
• Collaborating with other developers on the team
• Working closely with Business Operation Teams, Product and Application Development teams, and other internal customers during application development and deployment
• Training users on the use and maintenance of new applications

Project Description

• Join an agile team as one of the developers to develop a web solution for Micron globally including, but not limited to, API, ETL, and database
• Can be a new or existing running projects

Learning Outcomes

• Gain hands-on development experience in modern tools and pioneering tech stacks (Angular, OpenShift, Azure)
• Learn to work effectively in the IT agile development team to develop successful product with timely delivery
• Gain domain knowledge on semiconductor industry
• Learn problem-solving and analytical skills and good software engineering practices
• Develop communications, interpersonal, and other critical skills in the professional environments

Pre-requisites

• Proficient in Angular, .NET Core, C#, and SQL
• Knowledge of containerized deployment with Docker, Kubernetes, and OpenShift a plus.

Traits

• Strong analytical, problem solving, and interpersonal skills
• Motivated to work in dynamic and fast-paced environment
• Ambitious and driven to complete tasks independently while recognizing ways to improve processes
• Active team participation, partnership, and consensus-building skills
• Good verbal and written communication skills

Responsibilities

• Implements full software development process
• Collaborates multi-functionally with business users, project managers and other engineers to achieve elegant solutions.
• Develops high quality and innovative software design and solutions.
• Provides ongoing documentation, maintenance, support and improvements in existing systems and platforms.
• Provides 24x7 Support

Education Required

Bachelors Degree or equivalent experience in Computer Science or related field of study

Experience Required

3 years experience in 3 or more of the following:

• Experience in front-end web development (preferably Angular, ASP.NET)
• Proficiency in C# and Object Oriented Programming
• Proficiency in HTML, CSS, JavaScript
• Experience in RESTful Web API development (preferably ASP.NET Core, Node.js)
• Experience with Agile development methodologies
• Good understanding of one or more database technologies (MSSQL, ORACLE, Snowflake, MongoDB, CouchDB)
• Experience in SSIS, SSRS, Tableau, PowerBI or any Business Intelligence technologies Bonus if you have experience in Python and cloud programming, CICD (Azure), NiFi
• Knowledge of source code repositories (Git)
• Knowledge of SQA is a bonus

Working Location

1, North Coast Drive, Singpaore 757432

Project Description

• Join an agile team as one of the developers to develop a web solution for Micron globally including, but not limited to, API, ETL, and database
• Can be a new or existing running projects

Learning Outcomes

• Gain hands-on development experience in modern tools and cutting-edge tech stacks (Angular, OpenShift, Azure)
• Learn to work effectively in the IT agile development team to develop successful product with timely delivery
• Gain domain knowledge on semiconductor industry
• Learn problem-solving and analytical skills and good software engineering practices
• Develop communications, interpersonal, and other critical skills in the professional environments

Pre-requisites

• Proficient in Angular, .NET Core, C#, and SQL
• Knowledge of containerized deployment with Docker, Kubernetes, and OpenShift a plus.

Traits

• Strong analytical, problem solving, and interpersonal skills
• Motivated to work in dynamic and fast-paced environment
• Ambitious and driven to complete tasks independently while recognizing ways to improve processes
• Active team participation, partnership, and consensus-building skills
• Good verbal and written communication skills

Overview:

Our client is seeking a skilled and proactive SIEM Detection Engineer to join their cybersecurity team. This role is critical in the engineering, development, and continuous improvement of threat detection use cases within their SIEM platform. The ideal candidate will be responsible for creating and tuning custom detection rules, mapping existing capabilities to the MITRE ATT&CK framework, and collaborating with the SOC to improve overall detection and prevention measures.

Key Responsibilities:

• Design, test, and refine new detection use cases within the SIEM platform.
• Enhance and optimize existing detection use cases using Machine Learning and User & Entity Behavior Analytics (UEBA).
• Map detection use cases to the MITRE ATT&CK framework to evaluate and ensure comprehensive monitoring coverage.
• Maintain and update threat detection playbooks, processes, and documentation.
• Collaborate with the SOC team to continuously improve detection and prevention capabilities.
• Identify gaps in SIEM coverage and implement new use cases to address blind spots.
• Work with the log onboarding team and SIEM architect to validate log sources and ensure compliance with CIM standards.
• Partner with Service Operations to improve processes, documentation, and overall service quality.
• Provide governance on topics related to operational stability.

Requirements:

• Minimum of 3 years of experience in SIEM use-case engineering, with 5+ years in cybersecurity.
• Strong experience working in a security operations role.
• Proficiency with Splunk Enterprise Security (ES) and developing/tuning detection use cases (Correlation Searches) based on Data Models.
• Knowledge of Machine Learning and Risk-Based Monitoring in Splunk is a plus.
• Expertise in analyzing and interpreting security logs to identify potential threats and attack patterns.
• Experience with the Common Information Model (CIM) for validating data sources.
• Ability to create and use data models in Splunk for threat detection.
• Deep understanding of cybersecurity concepts and the attack lifecycle.
• Familiarity with the MITRE ATT&CK framework and applying it to threat detection.
• Experience in creating interactive dashboards, alerts, and reports in Splunk.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a EQUIPMENT ENGINEER to be paart of our ETCH DEPARTMENTdiverse team of talent. You will be responsible for equipment preventive maintenance and equipment performance indices.

What you will be working on:

• Establish systems/guidance in sustaining and improving all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production when requested.
• Perform scheduled equipment preventive maintenance (PM), calibration and troubleshoot equipment-related problems on a timely basis to minimize equipment downtime.
• Conduct installation and hook-up of new equipment.
• Perform task with zero error.
• Establish work procedures, corrective actions and preventions
• Oversee the preparation of consumables/preventive maintenance parts to ensure adequate provision.
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to the team to improve performance of equipment to meet Module objectives.
• Assist in implementing and managing process improvement projects.
• Ensure good housekeeping and safety practices in the Fab.
• Safe custody of tools, equipment and other properties belonging to the Module.
• Initiate, organize, develop and lead task-force for short term problem solving and long term continuous improvement.

More About You:

• Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics or equivalent
• 2-5 years semiconductor wafer fab experience as an Equipment Engineer
• Engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Familiar with TEL Unity DRM/ ME+ Platform and Dry Strippers
• Good Team Player
• Good Analytical & Problem-Solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

As a Service Engineer, you have to attend to equipment fault at customers’ premises. Liaise with the customer and sub-contractors regarding all aspect on the add-on project activities. Monitor the progress of the work done closely in order to ensure that the schedule and quality of work are met. Also to ensure that all materials and equipment are delivered on time as per schedule for site installation or rectification of fault. To carry out periodic maintenance for our customers.

You should possess a Diploma in Electronics and/or Electrical Engineering with 2-3 years’ hands-on experience in troubleshooting of card access systems, alarm systems, CCTV, etc. With good interpersonal communication skills and a valid Class 3 license. Stand-by duty is required.

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer to be part of our Photolithography Equipment diverse team of talent.

What you will be working on:

• To assist the engineers to sustain and improve all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production.
• Perform scheduled equipment preventive maintenance (PM), calibration, troubleshooting and monitoring of equipment-related problems on a timely basis to minimize equipment downtime.
• Assist engineers in the installation and hook-up of new equipment.
• Perform task with zero error.
• Prepare consumables/preventive maintenance parts to ensure adequate provision.
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives.
• Assist in implementing process improvement projects.
• Ensure good housekeeping and safety practices in the Fab.
• Safe custody of tools, equipment and other properties belonging to the Module.
• Assist new associate engineers on their on-the-job-training (OJT) by acting as their buddy.

More about you:

• Diploma in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology or equivalent
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Experience in TRACK ACT8/Mark8
• Good Problem-Solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

• Must have experience in data center deployments, building large-scale infrastructure.
• Knowledge of network routing and switching concepts and protocols including BGP, TCP/IP, VLAN, ISIS, OSPF, and MPLS
• Comfortable accomplishing basic tasks from Linux/Unix command line interface
• Demonstrated ability to analyze complex situations and utilize troubleshooting skills, systems and tools, and creative problem-solving abilities under pressure.
• Experience with Service Provider network hardware platforms and architectures including routers/switches and data center switching platforms is preferred (Good to have)
• Experience with field-based work in data centers